(Translated by https://www.hiragana.jp/)
Commander

Commander

Rate this program @ The DXZone  

Commander allows you to control your  Alinco, Elecraft, Flexradio, Icom, JRC, Kachina, Kenwood, TenTec, or Yaesu radio from a PC running Windows 95, 98, NT, 2000, XP, Vista, 7, 8, or 10; both 32-bit and 64-bit flavors of Windows are supported.  Commander is free, and contains no advertising; commercial use is expressly forbidden.

If you have questions or suggestions, please post them on the DXLab Discussion Group.

Other members of the DXLab suite of free amateur radio software:

 

Control your Transceiver from your PC Screenshot with right side of window showing filters and frequency-dependent device settings

  • Alinco DX77-E, DX77-T, DX-SR8

  • Apache Labs ANAN-200D

  • DZKIT SIENNA

  • Elecraft K2, K3, KX3, K4

  • FlexRadio SDR-1000, FLEX-1500, SDR-3000, SDR-5000, FLEX-6300, FLEX-6400, FLEX-6500, FLEX-6600, FLEX-6700

  • Hilberling PT8000

  • Icom IC-271, IC-275, IC-375, IC-471, IC-475, IC-575, IC-703, IC-705, IC-706, IC-706MKII, IC-706MKIIG, IC-707, IC-718, IC-725, IC-726, IC-728, IC-729, IC-731, IC-735, IC-736, IC-737, IC-738, IC-746, IC-746Pro, IC-751, IC-756, IC-756Pro, IC-756Pro II, IC-756Pro III, IC-761, IC-765, IC-775, IC-781, IC-820, IC-821, IC-910H, IC-970, IC-1271, IC-1275, IC-7000, IC-7100, IC-7200, IC-7300, IC-7400, IC-7410,IC-7600, IC-7610, IC-7700, IC-7800, IC-7850, IC-7851, IC-9100, IC-9700

  • Icom R10, R71, R72, R75, R7000, R7100, R8500, R9000

  • JRC JRC-145, JRC-245

  • Kachina 505

  • Kenwood TS-50, TS-440S, TS-450, TS-480, TS-570, TS-590, TS-590SG, TS-690, TS-711, TS-790, TS-811, TS-850, TS-870, TS-890, TS-940, TS-950, TS-990S, TS-2000

  • TenTec Argonaut II, Argonaut V, Argonaut VI, Delta II, Eagle, Jupiter, OmniV.9, Omni VI, Omni VII, Orion, Orion II, Pegasus

  • Thetis (with Anan tranceivers)

  • Yaesu FT-100, FT-450, FT-736, FT-747, FT-757, FT-757GX, FT-757GXII, FT-767, FT-710, FT-817, FT-840, FT-847, FT-857, FT-890, FT-897, FT-900, FT-920, FT-950, FT-990, FT-991, FT-1000D, FT-1000MP, FT-1000MP MARK-V, FT-2000, FTDX-10, FTDX-101, FTDX-1200, FTDX-3000, FTDX-5000, FTDX-9000

 
  Screenshot of Bandspread window @ 5 kHzきろへるつ: 160m DX

Displays frequency-dependent control settings for devices like tuners and amplifiers, and drives a parallel port or microHAM, and OTRSP-compliant SO2R switching devices

Supports satellite QSOs by Interoperating with SATPC32 and the Self-contained Antenna Tracker (S.A.T.)

Provides 10 banks of 10 memories, each specifying frequency, mode, and filter

Displays active DX stations from SpotCollector in a zoom-able bandspread 

Switches between four transceivers with a mouse click, or automatically based on frequency

Supports simultaneous frequency and mode tracking by an independent transceiver, receiver, or panadaptor

Supports additive and subtractive transverters for the 6m, 4m, 2m, and 70cm bands

Permits definition of up two 2 sub-bands per band, and highlights out-of-segment operation

Interoperates with SDR-based panadaptors and skimmers

when controlling an Icom IC-705, IC-7300, IC-7610, IC-7850, IC-7851, or IC-9700, provides a Spectrum-Waterfall window that displays spectrum data, active DX stations, and a waterfall display

Supports User-defined Command Sequences

Monitors messages between your PC and transceiver

 
Documentation

 

yellow

 LotW
pink eQSL AG
cyan LotW & eQSL AG

Download and Install

Access to development releases

Version history

Defects

Enhancement requests

CI-V interface schematic (circuit board available from Far Circuits)

 
     
 
Spectrum-Waterfall window when controlling an Icom IC-7300, IC-7610, IC-7850, IC-7851, or IC-9700