|Density (||From 10 gsm to 3000 gsm|
Paper is a thin sheet material produced by mechanically or chemically processing cellulose fibres derived from wood, rags, grasses or other vegetable sources in water, draining the water through fine mesh leaving the fibre evenly distributed on the surface, followed by pressing and drying. Although paper was originally made in single sheets by hand, almost all is now made on large machines—some making reels 10 metres wide, running at 2,000 metres per minute and up to 600,000 tonnes a year. It is a versatile material with many uses, including printing, packaging, decorating, writing, cleaning, filter paper, wallpaper, book endpaper, conservation paper, laminated worktops, toilet tissue, currency and security paper and a number of industrial and construction processes.
The papermaking process developed in east Asia, probably China, at least as early as 105 CE, by the Han court eunuch Cai Lun, although the earliest archaeological fragments of paper derive from the 2nd century BCE in China. The modern pulp and paper industry is global, with China leading its production and the United States following.
The oldest known archaeological fragments of the immediate precursor to modern paper date to the 2nd century BCE in China. The pulp papermaking process is ascribed to Cai Lun, a 2nd-century CE Han court eunuch.
It has been said that knowledge of papermaking was passed to the Islamic world after the Battle of Talas in 751 CE when two Chinese papermakers were captured as prisoners. Although the veracity of this story is uncertain, paper started to be made in Samarkand soon after. In the 13th century, the knowledge and uses of paper spread from the Middle East to medieval Europe, where the first water-powered paper mills were built. Because paper was introduced to the West through the city of Baghdad, it was first called bagdatikos. In the 19th century, industrialization greatly reduced the cost of manufacturing paper. In 1844, the Canadian inventor Charles Fenerty and the German inventor Friedrich Gottlob Keller independently developed processes for pulping wood fibres.
Early sources of fibre
Before the industrialisation of paper production the most common fibre source was recycled fibres from used textiles, called rags. The rags were from hemp, linen and cotton. A process for removing printing inks from recycled paper was invented by German jurist Justus Claproth in 1774. Today this method is called deinking. It was not until the introduction of wood pulp in 1843 that paper production was not dependent on recycled materials from ragpickers.
The word paper is etymologically derived from Latin papyrus, which comes from the Greek
To make pulp from wood, a chemical pulping process separates lignin from cellulose fibre. A cooking liquor is used to dissolve the lignin, which is then washed from the cellulose; this preserves the length of the cellulose fibres. Paper made from chemical pulps are also known as wood-free papers (not to be confused with tree-free paper); this is because they do not contain lignin, which deteriorates over time. The pulp can also be bleached to produce white paper, but this consumes 5% of the fibres. Chemical pulping processes are not used to make paper made from cotton, which is already 90% cellulose.
There are three main chemical pulping processes: the sulfite process dates back to the 1840s and was the dominant method before the second world war. The kraft process, invented in the 1870s and first used in the 1890s, is now the most commonly practised strategy; one of its advantages is the chemical reaction with lignin produces heat, which can be used to run a generator. Most pulping operations using the kraft process are net contributors to the electricity grid or use the electricity to run an adjacent paper mill. Another advantage is that this process recovers and reuses all inorganic chemical reagents. Soda pulping is another specialty process used to pulp straws, bagasse and hardwoods with high silicate content.
There are two major mechanical pulps: thermomechanical pulp (TMP) and groundwood pulp (GW). In the TMP process, wood is chipped and then fed into steam-heated refiners, where the chips are squeezed and converted to fibres between two steel discs. In the groundwood process, debarked logs are fed into grinders where they are pressed against rotating stones to be made into fibres. Mechanical pulping does not remove the lignin, so the yield is very high, > 95%; however, lignin causes the paper thus produced to turn yellow and become brittle over time. Mechanical pulps have rather short fibres, thus producing weak paper. Although large amounts of electrical energy are required to produce mechanical pulp, it costs less than the chemical kind.
Paper recycling processes can use either chemically or mechanically produced pulp; by mixing it with water and applying mechanical action the hydrogen bonds in the paper can be broken and fibres separated again. Most recycled paper contains a proportion of virgin fibre for the sake of quality; generally speaking, de-inked pulp is of the same quality or lower than the collected paper it was made from.
There are three main classifications of recycled fibre:
- Mill broke or internal mill waste – This incorporates any substandard or grade-change paper made within the paper mill itself, which then goes back into the manufacturing system to be re-pulped back into paper. Such out-of-specification paper is not sold and is therefore often not classified as genuine reclaimed recycled fibre; however most paper mills have been reusing their own waste fibre for many years, long before recycling became popular.
- Preconsumer waste – This is offcut and processing waste, such as guillotine trims and envelope blank waste; it is generated outside the paper mill and could potentially go to landfill, and is a genuine recycled fibre source; it includes de-inked preconsumer waste (recycled material that has been printed but did not reach its intended end use, such as waste from printers and unsold publications).
- Postconsumer waste – This is fibre from paper that has been used for its intended end use and includes office waste, magazine papers and newsprint. As the vast majority of this material has been printed – either digitally or by more conventional means such as lithography or rotogravure – it will either be recycled as printed paper or go through a de-inking process first.
Recycled papers can be made from 100% recycled materials or blended with virgin pulp, although they are (generally) not as strong nor as bright as papers made from the latter.
Besides the fibres, pulps may contain fillers such as chalk or china clay, which improve its characteristics for printing or writing. Additives for sizing purposes may be mixed with it or applied to the paper web later in the manufacturing process; the purpose of such sizing is to establish the correct level of surface absorbency to suit ink or paint.
The pulp is fed to a paper machine, where it is formed as a paper web and the water is removed from it by pressing and drying.
Pressing the sheet removes the water by force. Once the water is forced from the sheet, a special kind of felt, which is not to be confused with the traditional one, is used to collect the water. When making paper by hand, a blotter sheet is used instead.
Drying involves using air or heat to remove water from the paper sheets. In the earliest days of papermaking, this was done by hanging the sheets like laundry; in more modern times, various forms of heated drying mechanisms are used. On the paper machine, the most common is the steam-heated can dryer. These can reach temperatures above 200 °F (93 °C) and are used in long sequences of more than forty cans where the heat produced by these can easily dry the paper to less than six percent moisture.
The paper may then undergo sizing to alter its physical properties for use in various applications.
Paper at this point is uncoated. Coated paper has a thin layer of material such as calcium carbonate or china clay applied to one or both sides in order to create a surface more suitable for high-resolution halftone screens. (Uncoated papers are rarely suitable for screens above 150 lpi.) Coated or uncoated papers may have their surfaces polished by calendering. Coated papers are divided into matte, semi-matte or silk, and gloss. Gloss papers give the highest optical density in the printed image.
The paper is then fed onto reels if it is to be used on web printing presses, or cut into sheets for other printing processes or other purposes. The fibres in the paper basically run in the machine direction. Sheets are usually cut "long-grain", i.e. with the grain parallel to the longer dimension of the sheet. Continuous form paper (or continuous stationery) is cut to width with holes punched at the edges, and folded into stacks.
All paper produced by paper machines as the Fourdrinier Machine are wove paper, i.e. the wire mesh that transports the web leaves a pattern that has the same density along the paper grain and across the grain. Textured finishes, watermarks and wire patterns imitating hand-made laid paper can be created by the use of appropriate rollers in the later stages of the machine.
Wove paper does not exhibit "laidlines", which are small regular lines left behind on paper when it was handmade in a mould made from rows of metal wires or bamboo. Laidlines are very close together. They run perpendicular to the "chainlines", which are further apart. Handmade paper similarly exhibits "deckle edges", or rough and feathery borders.
Paper can be produced with a wide variety of properties, depending on its intended use.
Published, written, or informational items
- For representing value: paper money, bank note, cheque, security (see security paper), voucher, ticket
- For storing information: book, notebook, graph paper, punched card, photographic paper
- For published materials, publications, and reading materials: books, newspapers, magazines, posters, pamphlets, maps, signs, labels, advertisements, billboards.
- For individual use: diary, notebooks, writing pads, memo pads journals, planners, note to remind oneself, etc.; for temporary personal use: scratch paper
- For business and professional use: copier paper, ledger paper, typing paper, computer printer paper. Specialized paper for forms and documents such as invoices, receipts, tickets, vouchers, bills, contracts, official forms, agreements.
- For communication: between individuals and/or groups of people: letter, post cards, airmail, telegrams, newsprint, card stock
- For organizing and sending documents: envelopes, file folders, packaging, pocket folders, partition folders.
- For artistic works and uses; drawing paper, pastels, water color paintings, sketch pads, charcoal drawings,
- For special printed items using more elegant forms of paper; stationary, parchment,
Packaging and industrial uses
- For packaging: corrugated box, paper bag, envelope, wrapping paper, paper string
- For cleaning: toilet paper, paper towels, facial tissue.
- For food utensils and containers: wax paper, paper plates and paper cups, beverage cartons, tea bags, condiments, food packaging, coffee filters, cupcake cups.
- For construction: papier-mâché, origami paper, paper planes, quilling, paper honeycomb, sandpaper, used as a core material in composite materials, paper engineering, construction paper, paper yarn, and paper clothing
- For other uses: emery paper, blotting paper, litmus paper, universal indicator paper, paper chromatography, electrical insulation paper (see also fishpaper), filter paper, wallpaper
It is estimated that paper-based storage solutions captured 0.33% of the total in 1986 and only 0.007% in 2007, even though in absolute terms the world's capacity to store information on paper increased from 8.7 to 19.4 petabytes. It is estimated that in 1986 paper-based postal letters represented less than 0.05% of the world's telecommunication capacity, with sharply decreasing tendency after the massive introduction of digital technologies.
Paper has a major role in the visual arts. It is used by itself to form two- and three-dimensional shapes and collages. It has also evolved to being a structural material used in furniture design. Watercolor paper has a long history of production and use.
Types, thickness and weight
The thickness of paper is often measured by caliper, which is typically given in thousandths of an inch in the United States and in micrometres (µm) in the rest of the world. Paper may be between 0.07 and 0.18 millimetres (0.0028 and 0.0071 in) thick.
Paper is often characterized by weight. In the United States, the weight is the weight of a ream (bundle of 500 sheets) of varying "basic sizes" before the paper is cut into the size it is sold to end customers. For example, a ream of 20 lb, 8.5 in × 11 in (216 mm × 279 mm) paper weighs 5 pounds because it has been cut from larger sheets into four pieces. In the United States, printing paper is generally 20 lb, 24 lb, 28 lb, or 32 lb at most. Cover stock is generally 68 lb, and 110 lb or more is considered card stock.
In Europe and other regions using the ISO 216 paper-sizing system, the weight is expressed in grams per square metre (g/m2 or usually just g) of the paper. Printing paper is generally between 60 g and 120 g. Anything heavier than 160 g is considered card. The weight of a ream therefore depends on the dimensions of the paper and its thickness.
The ISO 216 system used in most other countries is based on the surface area of a sheet of paper, not on a sheet's width and length. It was first adopted in Germany in 1922 and generally spread as nations adopted the metric system. The largest standard size paper is A0 (A zero), measuring one square metre (approx. 1189 × 841 mm). A1 is half the size of a sheet of A0 (i.e., 594 mm × 841 mm), such that two sheets of A1 placed side by side are equal to one sheet of A0. A2 is half the size of a sheet of A1, and so forth. Common sizes used in the office and the home are A4 and A3 (A3 is the size of two A4 sheets).
Paper may be classified into seven categories:
- Printing papers of wide variety.
- Wrapping papers for the protection of goods and merchandise. This includes wax and kraft papers.
- Writing paper suitable for stationery requirements. This includes ledger, bank, and bond paper.
- Blotting papers containing little or no size.
- Drawing papers usually with rough surfaces used by artists and designers, including cartridge paper.
- Handmade papers including most decorative papers, Ingres papers, Japanese paper and tissues, all characterized by lack of grain direction.
- Specialty papers including cigarette paper, toilet tissue, and other industrial papers.
Some paper types include:
- Bank paper
- Banana paper
- Bond paper
- Book paper
- Coated paper: glossy and matte surface
- Construction paper/sugar paper
- Cotton paper
- Fish paper (vulcanized fibres for electrical insulation)
- Inkjet paper
- Kraft paper
- Laid paper
- Leather paper
- Mummy paper
- Oak tag paper
- Troublewit, specially pleated paper
- Tyvek paper
- Waterproof paper
- Wax paper
- Wove paper
- Xuan paper
Much of the early paper made from wood pulp contained significant amounts of alum, a variety of aluminium sulfate salt that is significantly acidic. Alum was added to paper to assist in sizing, making it somewhat water resistant so that inks did not "run" or spread uncontrollably. Early papermakers did not realize that the alum they added liberally to cure almost every problem encountered in making their product would be eventually detrimental. The cellulose fibres that make up paper are hydrolyzed by acid, and the presence of alum eventually degrades the fibres until the acidic paper disintegrates in a process known as "slow fire". Documents written on rag paper are significantly more stable. The use of non-acidic additives to make paper is becoming more prevalent, and the stability of these papers is less of an issue.
Paper made from mechanical pulp contains significant amounts of lignin, a major component in wood. In the presence of light and oxygen, lignin reacts to give yellow materials, which is why newsprint and other mechanical paper yellows with age. Paper made from bleached kraft or sulfite pulps does not contain significant amounts of lignin and is therefore better suited for books, documents and other applications where whiteness of the paper is essential.
Paper made from wood pulp is not necessarily less durable than a rag paper. The aging behaviour of a paper is determined by its manufacture, not the original source of the fibres. Furthermore, tests sponsored by the Library of Congress prove that all paper is at risk of acid decay, because cellulose itself produces formic, acetic, lactic and oxalic acids.
Mechanical pulping yields almost a tonne of pulp per tonne of dry wood used, which is why mechanical pulps are sometimes referred to as "high yield" pulps. With almost twice the yield as chemical pulping, mechanical pulps is often cheaper. Mass-market paperback books and newspapers tend to use mechanical papers. Book publishers tend to use acid-free paper, made from fully bleached chemical pulps for hardback and trade paperback books.
The production and use of paper has a number of adverse effects on the environment.
Worldwide consumption of paper has risen by 400% in the past 40 years[clarification needed] leading to increase in deforestation, with 35% of harvested trees being used for paper manufacture. Most paper companies also plant trees to help regrow forests. Logging of old growth forests accounts for less than 10% of wood pulp, but is one of the most controversial issues.
Paper waste accounts for up to 40% of total waste produced in the United States each year, which adds up to 71.6 million tons of paper waste per year in the United States alone. The average office worker in the US prints 31 pages every day. Americans also use in the order of 16 billion paper cups per year.
Conventional bleaching of wood pulp using elemental chlorine produces and releases into the environment large amounts of chlorinated organic compounds, including chlorinated dioxins. Dioxins are recognized as a persistent environmental pollutant, regulated internationally by the Stockholm Convention on Persistent Organic Pollutants. Dioxins are highly toxic, and health effects on humans include reproductive, developmental, immune and hormonal problems. They are known to be carcinogenic. Over 90% of human exposure is through food, primarily meat, dairy, fish and shellfish, as dioxins accumulate in the food chain in the fatty tissue of animals.
The paper pulp and print industries emitted together about 1% of world Greenhouse-gas emissions in 2010 and about 0.9% in 2012, but less than screens: digital technologies emitted approximately 4% of world Greenhouse-gas emissions in the year 2019 and the number can be two times larger by the year 2025.
Some manufacturers have started using a new, significantly more environmentally friendly alternative to expanded plastic packaging. Made out of paper, and known commercially as PaperFoam, the new packaging has mechanical properties very similar to those of some expanded plastic packaging, but is biodegradable and can also be recycled with ordinary paper.
With increasing environmental concerns about synthetic coatings (such as PFOA) and the higher prices of hydrocarbon based petrochemicals, there is a focus on zein (corn protein) as a coating for paper in high grease applications such as popcorn bags.
- Arches paper
- Continuous form paper (or "continuous stationery")
- Deinked pulp
- Environmental impact of paper
- Fibre crop
- Graphene oxide paper
- Lokta paper
- Mass deacidification
- Paper and ink testing
- Paper armour
- Paper chemicals
- Paper clip
- Paper craft
- Parchment paper, a form of paper made to emulate the texture of animal-based parchment
- Roll hardness tester
- Seed paper
- Stone paper
- Hogben, Lancelot. "Printing, Paper and Playing Cards". Bennett, Paul A. (ed.) Books and Printing: A Treasury for Typophiles. New York: The World Publishing Company, 1951. pp. 15–31. p. 17. & Mann, George. Print: A Manual for Librarians and Students Describing in Detail the History, Methods, and Applications of Printing and Paper Making. London: Grafton & Co., 1952. p. 77
- Tsien 1985, p. 38
- Ward, James (2015). The Perfection of the Paper Clip: Curious Tales of Invention, Accidental Genius, and Stationery Obsession. Atria Books. ISBN 978-1476799865.
- Burns 1996, pp. 417f.
- Murray, Stuart A. P. The Library: An illustrated History. Skyhorse Publishing, 2009, p. 57.
- Burger, Peter (2007). Charles Fenerty and his paper invention. Toronto: Peter Burger. pp. 25–30. ISBN 978-0-9783318-1-8. OCLC 173248586. Archived from the original on 19 April 2009. Retrieved 19 May 2009.
- Göttsching, Lothar; Gullichsen, Johan; Pakarinen, Heikki; Paulapuro, Hannu; Yhdistys, Suomen Paperi-Insinöörien; Technical Association of the Pulp and Paper Industry (2000). Recycling fiber and deinking. Finland: Fapet Oy. pp. 12–14. ISBN 978-952-5216-07-3. OCLC 247670296.
- πάπυρος Archived 16 June 2013 at the Wayback Machine, Henry George Liddell, Robert Scott, A Greek–English Lexicon, on Perseus
- "papyrus". Lexico UK English Dictionary. Oxford University Press. n.d.
- "papyrus". Dictionary.com Unabridged. Random House. Retrieved 20 November 2008.
- "Natural Resource Defense Council". Archived from the original on 24 February 2011. Retrieved 20 February 2008.
- Appropriate Technology. Intermediate Technology Publications. 1996.
- Thorn, Ian; Au, Che On (24 July 2009). Applications of Wet-End Paper Chemistry. Springer Science & Business Media. Bibcode:2009aowp.book.....T. ISBN 978-1-4020-6038-0.
- "ARCHIVED – Introduction – Detecting the Truth. Fakes, Forgeries and Trickery – Library and Archives Canada" Archived 2 August 2018 at the Wayback Machine in a virtual museum exhibition at Library and Archives Canada
- "The World's Technological Capacity to Store, Communicate, and Compute Information" Archived 12 June 2018 at the Wayback Machine, especially Supporting online material Archived 18 October 2017 at the Wayback Machine, Martin Hilbert and Priscila López (2011), Science, 332(6025), 60–65; free access to the article through here: martinhilbert.net/WorldInfoCapacity.html doi:10.1126/science.1200970
- "Lynette Schweigert". NEA. 5 November 2015. Archived from the original on 4 October 2018. Retrieved 3 October 2018.
- "Herminia Albarrán Romero". NEA. 24 January 2013. Archived from the original on 4 October 2018. Retrieved 3 October 2018.
- Morris (August–September 2018). "Material Values, Paper". The Economist. p. 38.
- "Paper Thickness (Caliper) Chart". Case Paper. Archived from the original (PDF) on 1 May 2016. Retrieved 27 May 2017.
- Elert, Glenn. "Thickness of a Piece of Paper". The Physics Factbook. Archived from the original on 8 June 2017. Retrieved 27 May 2017.
- McKenzie, Bruce G. (1989). The Hammerhill guide to desktop publishing in business. Hammerhill. p. 144. ISBN 978-0-9615651-1-4. OCLC 851074844.
- "Density of paper and paperboard". PaperOnWeb. Archived from the original on 19 October 2007. Retrieved 31 October 2007.
- Johnson, Arthur (1978). The Thames and Hudson manual of bookbinding. London: Thames and Hudson. OCLC 959020143.
- Biermann, Christopher J/ (1993). Essentials of pulping and papermaking. San Diego: Academic Press. ISBN 978-0-12-097360-6. OCLC 813399142.
- Clark, James d'A. (1985). Pulp Technology and Treatment for Paper (2nd ed.). San Francisco: Miller Freeman Publications. ISBN 978-0-87930-164-4.
- Fabbri, Claudia; Bietti, Massimo; Lanzalunga, Osvaldo (2005). "Generation and Reactivity of Ketyl Radicals with Lignin Related Structures. On the Importance of the Ketyl Pathway in the Photoyellowing of Lignin Containing Pulps and Papers". J. Org. Chem. 2005 (70): 2720–2728. doi:10.1021/jo047826u. PMID 15787565.
- Erhardt, D.; Tumosa, C. (2005). "Chemical Degradation of Cellulose in Paper over 500 years". Restaurator: International Journal for the Preservation of Library and Archival Material. 26 (3): 155. doi:10.1515/rest.2005.26.3.151. S2CID 98291111.
"The Deterioration and Preservation of Paper: Some Essential Facts". Library of Congress. Archived from the original on 20 January 2015. Retrieved 7 January 2015.
Research by the Library of Congress has demonstrated that cellulose itself generates acids as it ages, including formic, acetic, lactic, and oxalic acids
- Martin, Sam (2004). "Paper Chase". Ecology Communications, Inc. Archived from the original on 19 June 2007. Retrieved 21 September 2007.
- EPA (28 June 2006). "General Overview of What's in America's Trash". United States Environmental Protection Agency. Archived from the original on 5 January 2012. Retrieved 4 April 2012.
- Groll, T. 2015 In vielen Büros wird unnötig viel ausgedruckt Archived 17 August 2015 at the Wayback Machine, Zeit Online, 20 June 2015.
- Effluents from Pulp Mills using Bleaching – PSL1. Health Canada DSS. 1991. ISBN 978-0-662-18734-9. Archived from the original on 5 July 2017. Retrieved 21 September 2007. Pdf Archived 12 September 2017 at the Wayback Machine
"Dioxins and their effects on human health". World Health Organization. June 2014. Archived from the original on 27 April 2018. Retrieved 7 January 2015.
More than 90% of human exposure is through food
- "World GHG Emissions Flow Chart 2010" (PDF). Ecofys. Ecofys. Retrieved 5 July 2020.
- "World GHG Emissions 2012". SANKEY DIAGRAMS. Ecofys. Retrieved 5 July 2020.
- Efoui-Hess, Maxime. "CLIMATE CRISIS: THE UNSUSTAINABLE USE OF ONLINE VIDEO" (PDF). The Shift Project. Retrieved 5 July 2020.
- "PaperFoam Carbon Friendly Packaging". Archived from the original on 9 March 2006. Retrieved 3 April 2006.
- "Barrier compositions and articles produced with the compositions cross-reference to related application". Archived from the original on 16 November 2018. Retrieved 13 June 2018.
- Burns, Robert I. (1996). "Paper comes to the West, 800–1400". In Lindgren, Uta (ed.). Europäische Technik im Mittelalter. 800 bis 1400. Tradition und Innovation (4th ed.). Berlin: Gebr. Mann Verlag. pp. 413–422. ISBN 978-3-7861-1748-3.
- Tsien, Tsuen-Hsuin (1985). Needham, Joseph (ed.). Paper and Printing. Science and Civilisation in China, Chemistry and Chemical Technology. V (part 1). Cambridge University Press.
- "Document Doubles" in ARCHIVED – Introduction – Detecting the Truth. Fakes, Forgeries and Trickery – Library and Archives Canada, a virtual museum exhibition at Library and Archives Canada
- Monro, Alexander (2013). The Paper Trail: An Unexpected History of the World's Greatest Invention. London: Allen Lane. ISBN 9781846141898. OCLC 1040764924.
- "Paper Brightness, Whiteness & Shade: Definitions and Differences" by David Rogers (June 26, 2015)
|Look up paper in Wiktionary, the free dictionary.|
|Wikimedia Commons has media related to Paper.|
- Technical Association of the Pulp and Paper Industry (TAPPI) official website
- The Arnold Yates Paper collection at University of Maryland Libraries
- "How is paper made?" at The Straight Dope, 22 November 2005
- Thirteen-minute video on modern paper production system, from Sappi