Tenacity is the resistance that a mineral offers to breaking, crushing, bending, cutting, or other acts of destruction. Fracture is how the mineral breaks once the tenacious limit has been exceeded.
Table
Fracture |
Fracture Description |
Brittle - Conchoidal |
Very brittle fracture producing small, conchoidal fragments. |
Brittle - Irregular |
Very brittle fracture producing irregular fragments |
Brittle - Subconchoidal |
Brittle fracture with subconchoidal fragments |
Brittle - Splintery |
Brittle fracture leaving splintery fragments. |
Brittle - Sectile |
Brittle fracture with slightly sectile shavings possible. |
Brittle |
Generally displayed by glasses and most non-metallic minerals. |
Brittle - Uneven |
Very brittle fracture producing uneven fragments. |
Conchoidal |
Fractures developed in brittle materials characterized by smoothly curving surfaces, (e.g. quartz). |
Conchoidal - Irregular |
Irregular fracture producing small, conchoidal fragments. |
Conchoidal - Uneven |
Uneven fracture producing small, conchoidal fragments. |
Elastic |
Fragments which spring back after bending. |
Earthy |
Dull, clay-like fractures with no visible crystalline affinities, (e.g. howlite). |
Even |
Flat surfaces (not cleavage) fractured in an even pattern. |
Fibrous |
Thin, elongated fractures produced by crystal forms or intersecting cleavages (e.g. asbestos). |
Fragile |
Crystals with a delicate and easily injured structure. |
Flexible |
Flexible fragments. |
Friable |
The crumbly disintegration of earthy materials or highly fractured minerals. |
Granular |
Fracture surfaces produced by aggregated minerals, (e.g. granite). |
Hackly |
Jagged, torn surfaces, (e.g. fractured metals). |
Irregular |
Flat surfaces (not cleavage) fractured in an irregular pattern. |
Micaceous |
Fracture of flexable micaceous cleavage fragments. |
Malleable |
Deforms rather than breaking apart with a hammer. |
None |
No fractures |
Plastic |
Deforms like soft, plastic materials. |
Plastic - Splintery |
Thin, soft flexable, elongated fractures produced by intersecting good cleavages or partings (e.g. hornblende). |
Regular |
Flat surfaces (not cleavage) fractured in a regular pattern. |
Sub Conchoidal |
Fractures developed in brittle materials characterized by semi-curving surfaces. |
Sectile |
Curved shavings or scrapings produced by a knife blade, (e.g. graphite). |
Splintery |
Thin, elongated fractures produced by intersecting good cleavages or partings (e.g. hornblende). |
Sugary |
Fracture surfaces produced by finely aggregated minerals, (e.g. massive anhydrite). |
Tough |
Difficult to break apart as shown by fibrous minerals and most metals. |
Unknown |
Minerals too small to observe fractures. |
Uneven |
Flat surfaces (not cleavage) fractured in an uneven pattern. |
Weak |
Hard to handle without causing serious harm or damage. |
Example Subject Searches
Example: "fracture splintery"" for all minerals with a splintery fracture.
Example: "fracture tough" for all minerals with a noticeably tough (hard to break) tenacity