Starting in 1996, Alexa Internet has been donating their crawl data to the Internet Archive. Flowing in every day, these data are added to the Wayback Machine after an embargo period.
It looks the the Jeep Wrangler Ultimate won't be the only Pentastar vehicle powered by a Chrysler 392 HEMI crate engine at SEMA this year. Although Chrysler had a preview early last week of most of the vehicles they will be displaying at SEMA, they apparently decided to hold something in reserve. The SR 392 is a steel bodied reproduction of a 1927 street rod dreamed up by Chrylser designers Mark Allen and Ralph Gilles and fabricated by Michael Chetcuti of Quality Metalcraft. The SR 392 is inspired by the Shadowrods XL-27 that was originally built by Jon Hall. More details are after the jump.
After biting our tongues for the last few days while (accurate) speculation surrounding the successor to the Chevy Cobalt SS Supercharged bounced around the web, we're finally able to come clean. This is the turbocharged 2008 Chevy Cobalt SS, and it's being introduced to the world at SEMA this week. Chevy went to great lengths to ensure that the SS badge means more than what it had become in recent years.
Coming in at 260 HP / 260 lb-ft, the SS/TC gains a full 55 horses over the now-defunct SS/SC. Power, of course, is sourced from the same 2.0L direct-injected, turbocharged, intercooled sledgehammer found under the bonnets of the Pontiac Solstice GXP, Saturn Sky Red Line, and forthcoming Chevy HHR SS. The GM Performance Division was tasked with making sure the improved Cobalt SS is well-sorted, and John Heinricy and company dialed in the FE5 sport suspension on the undulating twists and turns of the Nürburgring Nordschleife. The result, says GM, is a track-capable suspension that's still comfortable on the street, and which helps mitigate FWD performance foibles like torque steer.
Follow the jump for more, plus all the official GM press materials.
Click image for a gallery of the Chevy HHR Panel SS SEMA Special
When Chevy introduced the HHR SS during the Woodward Dream Cruise, a few commenters weighed in with the desire for an SS version of the HHR Panel, a variant with windowless sides meant for the commercial sector. Well, the General has granted that wish and will offer the Chevy HHR Panel SS as an '09 limited-production model (shown at right). In advance of that, however, an HHR Panel SS show car 9above) has been prepared for SEMA. It's based on the production vehicle, but because this is SEMA, it's been modified, of course.
The bar-less grille sets the tone up front, polished metal accents dress up the sides, and it's finished in a custom "suede" paint scheme with a panel graphic. 20" wheels fill the openings thanks to the modified FE5 suspension, and the car boasts interior modifications such as billet aluminum tie downs and rails inside the cargo area. Power comes from the same 2.0L DI turbo found in the HHR SS, and the show car has an automatic transmission. Hopefully, buyers of the production machine will be able to select the same five-speed manual available in the standard HHR SS, as well. In any case, if you have a small business that needs to deliver stuff quickly, your dream ride's on the way. Or, if you're one of the customizers GM has also targeted with the standard HHR Panel, you've just been provided a more exciting blank canvas upon which to work. Follow the jump for GM's official press release, and check out galleries of the HHR Panel SS production and show cars below.
UPDATE: It turns out there were actually some running and driving versions of this car, link in text below.
The fact that AMC never produced this car is probably part of the reason why they were able to hang on as the last independent automaker until the twilight of the 1980s. Looking at it now, though, makes us wish they'd gone after the mid-engined supercar segment with their iconoclastic flair. Sure, that'd mean an interior done up in noxious orange tartan, but look at that design! Richard Teague and crew managed to create a very muscular form evocative of what may have happened had a Toronado mated with Signor Miura. There were several development cars created, but no production version. What has recently surfaced is one of the "pushcars" used at events to show off the exterior styling. Pushcars were basically fiberglass bodies splashed from molds of the clay bucks. Underneath the exterior was a wooden framework and rudimentary axles front and rear.
Other pushcars from the same program have surfaced, one was even stuck atop a pole at a used car dealership before being rescued and restored (as a pushcar, that is.) The AMX/3, however, remained sealed away in Bruce Wayne's underground lair, it would seem, until earlier this year. The seller, second owner of the AMX/3, had intended on mounting the body to a Pantera chassis, but decided to sell it instead. New owner Tom Dulaney intends to restore the pushcar back to its original setup, but not before taking molds from the body to possibly create replica pieces. So, in the end, we may actually be able to own the sexiest AMC that never was, even if it is underpinned by a Fiero. Actually, there's no word on what would serve as a chassis, so let your imaginations run. We know what will be circling our heads as we fall asleep tonight.
Say what you will about the styling of the Mazda Taiki concept that's currently on display in Tokyo. It's quite possible that what's underneath is more interesting, anyway. Under the hood of the Taiki is a new gen rotary engine from Mazda called the 16X Renesis. Of course, the Rotary engine has its share of detractors, but Mazda's sticking with it anyway.
Further refining Felix Wankel's trochoid wonder, the Renesis (known internally as the 13B-MSP) has been massaged and enlarged for the first time in a very long time. Capacity is now 800cc per rotor, bringing total size up to 1.6 liters. Direct injection allows the 16X Renesis to put out more power and torque while running cleaner than a port injection setup would have allowed. Attention was also paid to reducing the oil consumption that Wankels are known for. The size of the engine is still pony-keg compact, and the rotor housing is now aluminum, which should save a little weight. While the new larger chamber design and direct injection offer more efficiency, it still remains to be seen whether or not the Rotary is capable of modern horsepower numbers without turbochargers (difficult with the side-port design) or swilling fuel like a sailor on shore leave. The 16X may show up in a special version of the current RX-8, or Mazda may hold off until a new RX-8 bows in 2011.
After a considerable number of plants had rejected it, the new four-year contract between the UAW and Chrysler LLC has finally been ratified. Despite late surges of approval from a number of plants, the voting was still very close. The UAW reports that the contract was approved by 56% of production workers, 51% of skilled trades workers, 94% of office and clerical workers and 79% of engineers represented by the UAW. You'll remember that the contract came at the conclusion of a 6-hour token strike on October 10th. It includes a union-run VEBA account to handle retiree benefits in the future, as well as a two-tier wage system similar to the one proposed by General Motors in its new contract with the union. One major difference between the two contracts, however, is that Chrysler did not give guarantees to the union concerning where its future products may be built. These promises were made by GM, and their exclusion from the Chrysler contract is thought to be the biggest reason why it almost didn't pass the rank and file vote.
Now it's on to negotiations with Ford, which have been happening quietly in the background this whole time. If the UAW's negotiations with Chrysler are anything to go by, we might expect an end to discussions and the threat of a strike as soon as Monday if a tentative agreement doesn't come sooner.
Last month we became very interested in the plight of Canadian consumers after witnessing first hand the disparity between the price of automobiles in their country and the U.S. The disparity became crystal clear when the Canadian Looney and U.S. dollar spent some time at parity, which revealed that, for instance, a Lincoln Navigator starting at $47,755 in this country goes for $76,299 in Canada. The range of disparity varies from car to car, but it's there on every model sold in the Great White North.
The obvious workaround here is for Canadians to buy their cars in the U.S. and import them into Canada. It's not an easy thing to do, but until automakers address the inequality of MSRPs (they may be forced to), it remains a worthwhile endeavor. That's why we were pleased to be pointed to the ImportCarCanada.com website that helps Canadians navigate the mine field that is cross-country importation of autos.
Navigating the site ourselves we learned a few things that were news to us. For instance, did you know there's a list of admissible vehicles in Canada? Sorry Ford Thunderbird fans (hello, anyone?), you're not allowed to enjoy the maple syrup above the border. Also, if the vehicle you're buying was built in North America, you don't have to pay taxes on it or duty fees at the border. Buy a BMW built in Germany, however, and you'll be hit with a 6.1% duty fee. Finally, customs is obviously a nightmare, and the site offers many guides to help Canadians keep their forms in order.
None of us on the Autoblog team lives in Canada and thus enjoy the relatively inexpensive cost of owning a car here in the U.S., but we're glad to know that Canadians can do something about the short end of the stick they're left holding.
We go to the SEMA Show in Las Vegas for the cars, but there are other modes of transportation present that pique our curiosity, as well. Take this quadracycle, for instance, built by Bourget Bike Works. We've seen quadracycles before, but not any stuffed with a 425-hp small block V8 like the Shredder here. We can't even tell where they're hiding the V8 under the hot rod-inspired aluminum body work, but it's supposedly there and spins those blingtastic 17-inch aluminum wheels in the rear with abandon. Only 25 Shredders will be made, though each will cost $90,000 when they go on sale in January. We can't wait to see the Shredder quadracycle in person next week on the show floor of SEMA, and will bring back more live shots of this mechanical curiosity.
The Ford GT has always been badass. When it went into production in 2003, all of those kit cars from back in the day suddenly paled in comparison to a genuine GT40-inspired supercar. It was a relative bargain, too. Of course, when we say relative bargain, we mean expensive. Always willing to settle, we've found a way to claim with a straight face that we own a GT. It's still not cheap, but it's hundreds, not hundreds of thousands. Winding Road has pointed us to the 1:6 scale remote control Ford GT over at wowzzers.com. Equipped with a 23cc engine, this three-plus foot long vehicle can buzz around at a maximum speed around 60 mph. Christmas is coming, and it's only $650.
Has Ernie Boch Jr. let the cat out of the bag? Autoblog reader Jason tipped us that he heard a fleeting mention of the 2008 Honda Accord being Motor Trend's Car Of The Year during a commercial for a seasonal promotion at the national sales champ dealership. Could it be that Jason's sharp ear has uncovered Motor Trend's announcement traditionally made in November? Boch Honda's website mirrors the statement that Jason heard, as well, offering a "newly redesigned 2008 Honda Accord LX, Motor Trend's Car Of The Year" for a $198/month lease. Motor Trend, on the other hand, remains mum so far on its pick. The press always blows the automaker's embargoes, how meta is it that a dealer appears to have deflated the COTY balloon? We'll be giving Ernie a ring on Monday, stay tuned.
click above image to view a high-res gallery of the TRD Tundra Double Cab
Though Toyota will have an actual diesel-powered heavy-duty Tundra on hand at the SEMA Show in Las Vegas next week, we doubt it will have the style and visual presence of the Toyota Racing Development Tundra Double Cab Off-Road Concept shown here. We first got wind it concept last week from an ad that appeared in AutoWeek, but now we've got all the pics and details for you straight from Toyota.
The concept truck with its 6.5-foot bed, restyled front and rear fascias (the non-functional hood scooplet is gone!) and five-inch wider fenders give this SEMA-fied Tundra a decidedly more aggressive and purposeful look than the current Tundra. Its TRD supercharger attached to Toyota's popular 5.7L V8 also puts out a much more robust 500 HP that's 50-state emissions legal. The TRD 17-inch off-road wheels wearing 37-inch BFG tires look ready to pound some pavement into submission, while the beefed up front and rear long-travel suspension appear up to the task of handling the 28-foot custom Featherlite car-hauler out back. Yes, even though the 10,200-lb trailer in the pic is sitting on its jack stands, there is a gooseneck hitch in the truck's bed and it can haul the trailer. Of course, concept vehicles don't normally go through the rigor of real work, so we hear Toyota will have another Tundra on hand to do this concept's dirty work. You can read more about that truck over at Pickuptruck.com. The trailer, meanwhile, isn't carrying Toyota's latest racing Tundra, but rather is filled with some of TRD's current product catalogue that SEMA attendees will be able to browse at the show. Something tells us they'll be more interested in the truck, however, than what it's hauling.
[Source: Toyota via Pickuptruck.com]
Gallery: Toyota TRD Tundra Double Cab Off-Road Concept
The Mercedes-Benz Museum in Stuttgart, Germany is now home to more than just automobiles. The museum has been recognized by the Guinness Book of Records for creating the "strongest artificially generated tornado in the world." The 34.4 meter high (that is 37.2 yards to those metrically challenged) vortex was not designed as an attraction, but to channel smoke out of the building in the event of a fire. The architecture wonderment that is the museum did not make use of any fire doors in the design (surely they would get in the way of the architect's vision). In order to meet regulations, the building engineers had to determine a way to keep smoke from spreading beyond the fire level, the tornado is the resulting solution. The twister takes around seven minutes to materialize and is generated by 144 jets and 28 tons of air. The low pressure area at the center of the tornado works to create a jet stream that draws smoke out of the building's corridors and funnels it upwards and out an exhaust vent on the roof. Check the gallery for photos of a carbon dioxide infused tornado demonstration.
Check out the video of Mercedes' artificial tornado after the jump.
You'd think after looking at it that the Holden VE Sportwagon was one of those no-brainer vehicles that was a production lock from the moment it was a twinkle in some designer's eye. According to GoAuto, that wasn't exactly the case. The outgoing VZ wagon was a fleet darling, beloved for its exceptional cargo capacity. That added space came courtesy of the same LWB architecture used for the Caprice and Statesman sedans. In a departure from tradition (the wagons had been built on long-wheelbase platforms for decades), the VE proposal was based on the shorter underpinnings used for the Commodore sedan. With that comes reduced capacity and a total package that's less attractive to fleets. After ultimately seeing a clay model of the car presented in Sydney, Holden execs greenlit the project anyway.
And that's where we, the US and Canada, come in. One of the factors that pushed the VE wagon into production was its obvious export appeal. No agreements or contracts are in place, but according to GoAuto, Holden sees exports of 10,000 per year as being the goal, and North America the biggest target market outside of Australia and new Zealand. Meanwhile, Holden feels it can mitigate the expected downturn in fleet sales at home by leveraging the VE's great looks and sporty practicality to sell more profitable examples to consumers, especially ones looking to get out of SUVs. Assuming the stars line up and the car comes over to the US as hoped, it would be after the arrival of the Ute, which appears to be next in line according to the GoAuto piece. There's a lot more to the article, which is interesting, wide-ranging, and worth a read. As for the VE Wagon, well, this Autoblogger's all for it. It's a hell of a lot cooler than the '87 Pontiac Safari my parents had, and that I learned to drive in. Let's leave the wood stickers off this one, though, okay?
Though the title of this post might lead you to believe that we're mourning the loss of some guy's Ferrari Challenge Stradale and Porsche GT3 RS, we're actually celebrating the fact that he, his family and many like them are alive today despite their worldly possessions being devoured by fire. Of course, we're talking about the wildfires that have been raging across Southern California, which so far have burned 490,000 acres of land and created thousands of homeless people this week. Thankfully the fires are coming under control and Qualcomm Stadium, which sheltered some 10,000 people as an evacuation center at the peak of the wild fires, will be closing today.
The sight of a Porsche GT3 RS torched by Mother Nature isn't news by itself, but the incredible amount of compassion displayed on this Ferrarichat.com forum thread for the owner and his family is. These are true prancing horse fans, and we were amazed that few if any mentioned the Challenge Stradale, which reportedly melted, when expressing their concern and happiness that the owner and his family are alright. Ferraris and Porsches can be replaced, after all.
To learn which automakers have pledged support for wildfire relief and how much, visit our earlier post that we've been updating throughout the day. If you're interested in donating time or money to the effort, visit the American Red Cross.
It's fitting that on the day Subaru reveals its WRX STI Group N rally car we come across news of the Mitsubishi EVO X Group N rally car kicking up mud for the first time. You'll recall we told you that the EVO X had been chosen as the course car for the Japanese round of the FIA World Rally Championship, so while the car you see here was getting dirty, it was not in competition with any other vehicles. The job of the course car is to run the rally course before the race to check conditions. We're certain the drivers here were totally paying attention to track conditions the whole time. Rather, it looks like they were thoroughly enjoying the experience of lifting up the EVO X's skirt and getting it a little dirty. By the way, that light rig on the hood should be a factory option.