(Translated by https://www.hiragana.jp/)
Megabyte - Wikipedia, the free encyclopedia
The Wayback Machine - https://web.archive.org/web/20090418082111/http://en.wikipedia.org/wiki/Megabyte

Megabyte

From Wikipedia, the free encyclopedia

Jump to: navigation, search

Megabyte is a SI-multiple (see prefix mega-) of the unit byte for digital information storage or transmission and is equal to 106 (1000000) bytes. However, due to historical usage in computer-related fields it is still often used to represent 220 (1024×1024 or 1048576) bytes. In rare cases, it is used to mean 1000×1024 (1024000) bytes. It is commonly abbreviated as Mbyte or MB (compare Mb, for the megabit).

Prefixes for bit and byte multiples
Decimal
Value SI
1000 k kilo-
10002 M mega-
10003 G giga-
10004 T tera-
10005 P peta-
10006 E exa-
10007 Z zetta-
10008 Y yotta-
Binary
Value IEC JEDEC
1024 Ki kibi- K kilo-
10242 Mi mebi- M mega-
10243 Gi gibi- G giga-
10244 Ti tebi-
10245 Pi pebi-
10246 Ei exbi-
10247 Zi zebi-
10248 Yi yobi-

Contents

[edit] Definition

The term "megabyte" is ambiguous because it is commonly used to mean either 10002 bytes or 10242 bytes. The confusion originated as compromise technical jargon for the byte multiples that needed to be expressed by the powers of 2 but lacked a convenient name. As 1024 (210) is roughly equal to 1000 (103), roughly corresponding SI multiples began to be used as approximate binary multiples. By the end of 2007, standards and government authorities including IEC, IEEE, EU, and NIST, had addressed this ambiguity by promulgating standards requiring the use of megabyte to describe strictly 10002 bytes and "mebibyte" to describe 10242 bytes. This is reflected in an increasing number of software projects, but most file managers still show file sizes in "megabytes" ("MB") in the binary sense (10242 bytes). The term remains ambiguous and it can follow any one of the following common definitions:

  1. 1000000 bytes (10002, 106): This is the definition recommended by the International System of Units (SI) and the International Electrotechnical Commission IEC. This definition is used in networking contexts and most storage media, particularly hard drives, Flash-based storage[1], and DVDs, and is also consistent with the other uses of the SI prefix in computing, such as CPU clock speeds or measures of performance.
  2. 1048576 bytes (10242, 220): This definition is most commonly used in reference to computer memory, but most software that display file size or drive capacity, including file managers also use this definition. See Consumer confusion (in the "gigabyte" article).
  3. 1024000 bytes (1000×1024): This is used to describe the formatted capacity of the "1.44 MB" 3.5 inch HD floppy disk, which actually has a capacity of 1474560 bytes.

[edit] Megabyte examples

1.44 MB floppy disks can store 1474560 bytes of data. MB in this context means 1,000×1,024 bytes.

Depending on compression methods and file format, a megabyte of data can roughly be:

  • a 1024×1024 pixel bitmap image with 256 colors (8 bpp color depth).
  • 1 minute of 128 kbit/s MP3 compressed music.
  • 6 seconds of uncompressed CD audio.
  • a typical book volume in text format (500 pages × 2000 characters per page).

[edit] See also

[edit] References

  1. ^ SanDisk USB Flash Drive "Note: 1 megabyte (MB) = 1 million bytes; 1 gigabyte (GB) = 1 billion bytes."

[edit] External links

Personal tools