Materials Science and Technology 2008 (MS+T'08) Videos

•
AXAA 2011 Conference
•
Biomaterials
•
Carbon Fibre - Future Directions Interviews
•
Ceramic Materials
•
Coatings
•
Composite Materials
•
Corrosion
•
Ferrous Alloys
•
Functional Materials
•
Hard Materials
•
High Temperature Materials
•
ICONN 2010 Interviews
•
Light Alloys
•
Machining
•
Materials and Austceram 2009
•
Materials Processing
•
Materials Science and Technology 2008 (MS+T'08)

•
Materials Science and Technology 2009 (MS+T'09)
•
Materials Testing and Characterisation
•
MRS 2008 Fall Meeting Video Interviews
•
MRS 2010 Fall Meeting
•
Nanomaterials
•
Non-Ferrous Alloys
•
Pittcon 2009 Interviews
•
Pittcon 2011 Interviews
•
Precious Metals
•
Recylced and Sustainable Materials
•
Rubbers and Elastomers
•
Stainless Steel
•
Structural Materials
•
Thermoplastics
•
Thermosetting Polymers
•
Welding and Brazing

Materials Science and Technology 2008 (MS+T'08) Videos

The Admet DForce Dynamic Mechanical Tester - Fatigue Testing

The DForce from Admet is a low force mechanical testing system capabale of carrying out static and dynamic mechical testing operations. It is suited to fatigue testing biomedical materials such as stents and tubing.

The Sensys Evo Thermal Analyzer from Setaram - DSC and TG

The Sensys Evo is a versatile thermal analyzer that can be used as a Differential Scanning Calorimeter (DSC) or for thermogravimetry (TG). It uses a highly sensitive sensor that ensures as much heat is detected as possible and is suited to applications where mass/heat changes need to be detected.

The Anter LS2 Module for Thermal Property Determination

The FlashLine series from Anter Corp is able to determine various thermal properties of a wide range of materials using the laser flash method. The properties that the FlashLine can determine include thermal conductivity, thermal diffusivity and specific heat capacity. The modular unit allows thermal properties to be determined at a range of temperatures from cryogenic to 2800°C.

TechCut 5 Precision Sectioning Machine from Allied High Tech Products

The TechCut 5 Precision Sectioning Machine from Allied High Tech Products is a programmable sectioing saw suited for sample preparation. It can cut a wide variety of materials and sizes. Microprocessor control allows the user to control parameters such as feed rate, distance and force and cutting depth. The system can also automatically adjust to changes in cutting conditions such as changes in section or composition.

The Unitherm 1000 Dilatometer for Thermal Expansion Measurement from Anter Corp

The Unitherm 1000 dilatometer from Anter Corp can measure the thermal expansion of up to 4 samples simulatneously. Using different furnaces it can work in temperature ranges from cryogenic up to 1600°C. Accurate results are ensured through the use of digital displacement transducers.

Automated Image Analysis System from Clemex

Using the Clemex automated image analysi software package, the system is able to automate the microscope and take images across the surface of the sample. The system is able to autofocus and analyze images extremely quickly, meaning that the analysis of samples can be completed in very short time periods.

Demonstration of the xSORT Handheld XRF Analyzer from Spectro Analytical

In this video John Kelly and Dan Soisson from Spectro Analytical demonstrate the xSORT handheld x-ray fluorescence (XRF) analyzer. This portable unit is ideally suited to rapid throughput metals sorting and identification such as in scrap yards and stainless steel warehousing.

The Clemex CMT Automated Microhardness Testing Machine

The Clemex CMT is an automated microhardness testing machine that can operate in Vickers or Knoop testing modes. Operation can be fully automatic thanks to PC control and image analysis software.

The Zircar Hot Spot 110 1700°C High Temperature Laboratory Furnace

Zircar's David Hoskins demonstrates the simple operation and key features of the Hot Spot 110 1700°C high temperature laboratory furnace.

The C-Therm Technologies TCi Thermal Conductivity Analyzer

The ease of use and fast operation of the C-Therm Technologies TCi Thermal Conductivity Analyzer is demonstrated. In this demosntration the thermal conductivity of a Pyroceram sample is taken within seconds.

The Bruker Tracer Turbo SD Handheld Portable XRF (X-Ray Fluorescence) Analyzer

The Bruker AXS Tracer Turbo SD, incorporating the silicon drift detector is demonstrated. It can analyze both ferrous alloys and light alloys, with this demomstration including a stainless steel and aluminium aloy. The instrument is suited to metals analysis, such as scrap metal sorting.

The MultiPrep High Precision Sample Preparation System from Allied High Tech Products

The Multiprep System is a semiautomatic instrument ideal the preparation of precise samples with tiny geometries for microscopic analysis. The sophisticated design, using specifically designed jigs, enables the MultiPrep is able to take the guess work out of polishing and prepare samples in a repeatable fashion.<

The Cilas 1180 Laser Particle Size Analyzer - Key Features

Richard Nameth from Cilas demonstrates the key features of the Cilas 1180 laser particle size analyzer. The Cilas 1180 is a 3 laser particle size analyzer suited to the pharmaceuticals, cement, chemical and geological industries to name but a few. It can detect particle sizes between .04 and 2500 microns.

The Pentronix Multipack 1204 Automated Anvil Press

The Pentronix Multipack 1204 is suited to pressing ceramic and metallic powders into high precision components at the rate of 10-120 parts per minute. These components are typically used in electronic applications.

Apr	JUN	Aug
	14
2010	2011	2012

Materials Science and Technology 2008 (MS+T'08) Videos

Materials Videos by Subject Matter