MRS 2008 Fall Meeting Video Interviews Videos

•
AXAA 2011 Conference
•
Biomaterials
•
Carbon Fibre - Future Directions Interviews
•
Ceramic Materials
•
Coatings
•
Composite Materials
•
Corrosion
•
Ferrous Alloys
•
Functional Materials
•
Hard Materials
•
High Temperature Materials
•
ICONN 2010 Interviews
•
Light Alloys
•
Machining
•
Materials and Austceram 2009
•
Materials Processing
•
Materials Science and Technology 2008 (MS+T'08)

•
Materials Science and Technology 2009 (MS+T'09)
•
Materials Testing and Characterisation
•
MRS 2008 Fall Meeting Video Interviews
•
MRS 2010 Fall Meeting
•
Nanomaterials
•
Non-Ferrous Alloys
•
Pittcon 2009 Interviews
•
Pittcon 2011 Interviews
•
Precious Metals
•
Recylced and Sustainable Materials
•
Rubbers and Elastomers
•
Stainless Steel
•
Structural Materials
•
Thermoplastics
•
Thermosetting Polymers
•
Welding and Brazing

MRS 2008 Fall Meeting Video Interviews Videos

The Scanning Kelvin Probe from KP Technologies - Operation and Capabilities

Prof. Iain D. Baikie from KP Technology introduces us to the Scanning Kelvin Probe which measures the work function difference between a vibrating tip and the sample. It is suited to the analysis of such things as metals, electronic devices, patterned wafers, solar cells etc and can carry out similar functions to an AFM

The Accusizer 780 Laser Diffraction Particle Size Analyzer from Agilent Technologies

The Agilent Technologies AccuSizer 780 is a laser diffraction particle size analyzer that measures the size of individual particle to produce high accuracy particle size distributions

Demonstration of the VESTA Localized Thermal Analysis System from Anasys Instruments

Kevin Kjoller, Vice President of Product Development at Anasys Instruments demonstrates how easy the VESTA localized thermal analysis system is to use.

Key Features and Capabilities of the XE-Bio AFM from Park Systems

The key features and capabilities of the XE-Bio AFM (atomic force microscope) are described. These include the unique scanning ion conductance microscopy (SICM) technology that allows imaging of living cells in liquid media.

The Nanosurf easyScan2 FlexAFM - Key Features

Ola Modinger from Nanosurf points out some of the key features of their easyScan2 FlexAFM that was released at the 2008 MRS Fall Meeting, where this interview was recorded.

Key Features and Operation of The SOLVER NEXT SPM/AFM from NT-MDT

This short video shows the key features and ease of operation of the SOLVER NEXT SPM/AFM from NT-MDT. It has been designed so that operators with limited experience can take quality measurements.

The Dimension V AFM/Nanomechanical Tester from Veeco - Key Features and Operation

The Dimension V from Veeco combines an atomic force microscope (AFM) with a nanomechanical tester. This is achieved using a specifically designed probe. It is able to measure properties such as stiffness, adhesion and energy dissipation as well as provide the imaging capabilities of an AFM.

Portable Network Analyzer for Measuring Dielectric Properties of Liquids from Agilent Technologies

Agilent Technologies' Shelley Begley demonstrates their portable system for determining dielectric properties of liquids. The system centers around a portable network analyzer and ca be used for measuring properties such as permittivity and loss tangent.

How a Kelvin Probe Works by KP Technology

KP Technology's Prof. Iain D. Baikie explains how a Kelvin Probe works.

Features and Capabilities of the Agilent 5600 Large Stage AFM

The Agilent 5600LS utilizes a fully addressable 200 mm x 200 mm stage and a new, low-noise AFM design. The programmable, motorized stage enables fast, accurate probe positioning for imaging and mapping large specimens at atomic-scale resolution using a state-of-the-art Agilent AFM.

Pre-Launch Look at the NLP2000 Dip Pen Nanolithography from Nanoink

In this pre-launch interview, Tom Levesque from Nanoink tells us about the NLP2000 which is the next generation Dip Pen Nanolithiography (DPN) system. This system is easy to use and can cater for large substrates as it does not have an integrated AFM. The absence of an AFM reduces the cost of the device and increases its versatility.

Demontration of the Versatile Nanoindentation Testing Platform from CSM Instruments

The Nanoindenation platform is a versatile system available in two configuations that allow you to build a device tailored ot your specific requirements. You can incorporate various testing modules such as: Nano and microindentation; Nano and microscratc; and Micro/nanoscratch. You can also choose between imaging systems suc as a: Video microscope; AFM; or profilometer.

The Smart SPM/AFM from AIST-NT - Ease of Use Demonstration

Marshall Bates and Andrey Krayev from AIST-NT demonstrate the ease of use of the AIST SmartSPM/AFM. From loading a sample to starting to take measurements can be completed in 1-2 minutes, at atomic resolutions

Demonstration of the Revetest Xpress Scratch Tester from CSM Instruments

The REVETEST Xpress is a cost effective solution for Industrial and Quality Control (QC) applications. This instrument provides measurement of adhesion, hardness and scratch resistance with a very user-friendly, intelligible interface.

Key Features and Capabilities of The Agilent G200 Nano Indenter

The Nano Indenter G200 is the most advanced platform for exploring material properties at the nano and micro scales. Its state of the art motion system speeds sample throughput without sacrificing accuracy. It also conforms to ISO 14577 - 1, 2 & 3; delivering confidence in test accuracy and repeatability.

The Nicomp 380 ZLS Particle Size and Zeta Potential Analyzer from Agilent Technologies

The Agilent Nicomp 380 ZLS can measuire both particle size and zeta potential. Particle size is determined by dynamic light scattering or DLS and trhe Nicomp 380 ZLS can measure particles from a few nanometers to microns.

The Veeco Dektak 150 Surface Profilometer - Key Features

The Dektak 150 Surface Profilometer from Veeco uses stylus profilometry technology, which is the accepted standard for surface topography measurements.

A Pre-Launch Look at the DPN5000 Dip Pen Nanolithography System from Nanoink

In this pre-launch interview, Tom Levesque from Nanoink tells us about the DPN5000 which is the next generation Dip Pen Nanolithiography (DPN) system.

Key Features and Capabilities of the Agilent Technologies 7020 Zetaprobe

The Agilent Technologies 7020 Zetaprobe measures zeta potential of suspensions. It can cater for samples with high solids loadings, which can eliminate the need for diluting samples.

The Ultra High Vacuum Kelvin Probe from KP Technology

Prof. Iain D. Baikie from KP Technology shows us their Ultrahigh Vacuum Kelvin Probe. It is used for measuring changes in a sample's surface such as may be the case when a coating is employed, due to temperature changes and can be adpated for use with semiconductors.

10GHz Split Cylinder Resonator for Dielectric Property Measurement - Agilent Technologies

Shelley Begley from Agilent Technologies demonstrates how the 10GHz Split Cylinder Resonator is able to measure dielectric properties of low loss materials, thin films and substrates.

Optical Systems for Improved XRF and XRD Analysis by XOS

XOS manufacture polycapillary optics and doubly curved crystal optics. These are used in x-ray fluorescence, XRF (both wavelength dispersive and energy dispersive, WDXRF and EDXRF systems) as well as x-ray diffraction XRD systems, which are widely used in materials analysis. The addition of these optical systems allows the instrument to analyze smaller features with greater sensitivity

Introduction and Demonstration of the XE-70 Research AFM from Park Systems

Joe McGuire, Director of National Sales for Park Systems introduces us to the XE-70 Research AFM. He outlines the key features and attributes of this atomic force microscope, including hardware and software

Demonstration of the Ease of Operation of the Nanosurf easyScan2 FlexAFM

Ola Modinger from Nanosurf gives us and introduction to the their easyScan2 FlexAFM that was released at the 2008 MRS Fall Meeting, where this interview was recorded. We then get a demonstration of how easy this instrument is to operate.

Capabilities and Key Features of the Park Systems XE-NSOM AFM

The key features and capabilities of the Park Systems XE-NSOM, atomic force microscope incorporating near-field scanning optical microscopy are demonstrated and a details explanation of its operation is provided.

NTEGRA Aura SPM Platform from NT-MDT - Key Features

The NT-MDT NTEGRA Aura system is a versatile SPM platform can be modified in numerous ways to adapt to various sample types as well as to take different types of measurements.

Ambios Technology Q-View SPM/Interferometer – Capabilities

Rick Olds from Ambios Technology shows us through the Q-View. The Q-View which combines scanning probe microscopy (SPM) and interferometer which are interchangeable for taking surface roughness and topography measurements on small and larger areas.

The Cypher AFM from Asylum Research - Key Features and Capabilities

The Cypher AFM from Asylum Research is the most revolutionary small sample AFM released in the last decade. It features an envonmental chamber, high resolution scanner providing sub angstrom resolution and fast imaging thanks to the small cantilevers.

Demonstration of The CSM TTX Table Top Nanoindentation Tester

The CSM TTX Table Top Instrument is a high performance Nanoindentation Tester (NHT) in a small and simple-to-use package. It is suited to customary nanoindentation testing where a complete platform configuration is not required.

Apr	JUN	Aug
	14
2010	2011	2012

MRS 2008 Fall Meeting Video Interviews Videos

Materials Videos by Subject Matter