steam power

Assorted References

• major reference  (in  energy conversion (technology): Steam engines)

  The foundations for the use of steam power are often traced to the experimental work of the French physicist Denis Papin. In 1679 Papin invented a type of pressure cooker, a closed vessel with a tightly fitting lid that confined steam until high pressure was generated. Observing that the steam in the vessel raised the lid, he conceived the idea of using steam to power a piston and cylinder...

effect on

• industry  (in  steam)

  Steam power constitutes an important power source for industrial society. Water is heated to steam in power plants, and the pressurized steam drives turbines that produce electrical current. The thermal energy of steam is thus converted to mechanical energy, which in turn is converted into electricity. The steam used to drive turbogenerators furnishes most of the world’s electric power. Steam...

• logistics  (in  logistics (military): Special features of naval logistics)

  During the long reign of the sailing ship, the absence of a fuel requirement was a major factor in the superior mobility of fleets over armies. The shift to steam was, in a sense, a return to the principle of self-contained propulsion earlier embodied in the oar-driven ship. The gain in control was of course an immeasurable improvement for the long haul, but for a time the inordinate amount of...

• mechanical engineering  (in  mechanical engineering: Development of machines for the production of power)

  The steam engine provided the first practical means of generating power from heat to augment the old sources of power from muscle, wind, and water. One of the first challenges to the new profession of mechanical engineering was to increase thermal efficiencies and power; this was done principally by the development of the steam turbine and associated large steam boilers. The 20th century has...

• power technology  (in  history of technology: Steam engines)

  ...American engineer Oliver Evans built the first high-pressure steam engine in the United States, using, like Trevithick, a cylindrical boiler with an internal fire plate and flue. High-pressure steam engines rapidly became popular in America, partly as a result of Evans’ initiative and partly because very few Watt-type low-pressure engines crossed the Atlantic. Trevithick quickly applied...

• work organization  (in  history of the organization of work (work): New industries)

  The introduction of steam-driven machinery—much of it fueled by coal—brought new industries into being or transformed older ones. Coal was replacing wood as a fuel especially in England and northern France, where deforestation had made wood scarce. New demands stimulated growth in the coal-mining industry, yet the organization of labour remained much as it had when Agricola wrote...

use in

• automotive technology  (in  automobile: The age of steam)

  Most historians agree that Nicolas-Joseph Cugnot of France was the constructor of the first true automobile. Cugnot’s vehicle was a huge, heavy, steam-powered tricycle, and his model of 1769 was said to have run for 20 minutes at 2.25 miles (3.6 km) per hour while carrying four people and to have recuperated sufficient steam power to move again after standing for 20 minutes. Cugnot was an...

• elevator’s development  (in  elevator (vertical transport))

  ...to Roman times; the Roman architect-engineer Vitruvius in the 1st century bc described lifting platforms that used pulleys and capstans, or windlasses, operated by human, animal, or water power. Steam power was applied to such devices in England by 1800. In the early 19th century a hydraulic lift was introduced, in which the platform was attached to a plunger in a cylinder sunk in the ground...

• mining  (in  mining: History)

  Water inflow was a very important problem in underground mining until James Watt invented the steam engine in the 18th century. After that, steam-driven pumps could be used to remove water from the deep mines of the day. Early lighting systems were of the open-flame type, consisting of candles or oil-wick lamps. In the latter type, coal oil, whale oil, or kerosene was burned. Beginning in the...

• printing  (in  printing (publishing): Koenig’s mechanical press (early 19th century))

  The prospect of using steam power in printing prompted research into means by which the different operations of the printing process could be joined together in a single cycle.

• road vehicles  (in  automotive industry: History)

  Although steam-powered road vehicles were produced earlier, the origins of the automotive industry are rooted in the development of the gasoline engine in the 1860s and ’70s, principally in France and Germany. By the beginning of the 20th century, German and French manufacturers had been joined by British, Italian, and American makers.

• John Walter, II (English journalist)

• energy (physics)