-
Low-complexity hardware and algorithm for joint communication and sensing
Authors:
Andrea Bedin,
Shaghayegh Shahcheraghi,
Traian E. Abrudan,
Arash Asadi
Abstract:
Joint Communication and Sensing (JCAS) is foreseen as one very distinctive feature of the emerging 6G systems providing, in addition to fast end reliable communication, the ability to obtain an accurate perception of the physical environment. In this paper, we propose a JCAS algorithm that exploits a novel beamforming architecture, which features a combination of wideband analog and narrowband dig…
▽ More
Joint Communication and Sensing (JCAS) is foreseen as one very distinctive feature of the emerging 6G systems providing, in addition to fast end reliable communication, the ability to obtain an accurate perception of the physical environment. In this paper, we propose a JCAS algorithm that exploits a novel beamforming architecture, which features a combination of wideband analog and narrowband digital beamforming. This allows accurate estimation of Time of Arrival (ToA), exploiting the large bandwidth and Angle of Arrival (AoA), exploiting the high-rank digital beamforming. In our proposal, we separately estimate the ToA and AoA. The association between ToA and AoA is solved by acquiring multiple non-coherent frames and adding up the signal from each frame such that a specific component is combined coherently before the AoA estimation. Consequently, this removes the need to use 2D and 3D joint estimation methods, thus significantly lowering complexity. The resolution performance of the method is compared with that of 2D MUltiple SIgnal Classification (2D-MUSIC) algorithm, using a fully-digital wideband beamforming architecture. The results show that the proposed method can achieve performance similar to a fully-digital high-bandwidth system, while requiring a fraction of the total aggregate sampling rate and having much lower complexity.
△ Less
Submitted 13 September, 2023;
originally announced September 2023.
-
Modeling and Analysis of OFDM-based 5G/6G Localization under Hardware Impairments
Authors:
Hui Chen,
Musa Furkan Keskin,
Sina Rezaei Aghdam,
Hyowon Kim,
Simon Lindberg,
Andreas Wolfgang,
Traian E. Abrudan,
Thomas Eriksson,
Henk Wymeersch
Abstract:
Localization is envisioned as a key enabler to satisfy the requirements of communication and context-aware services in the fifth/sixth generation (5G/6G) communication systems. User localization can be achieved based on delay and angle estimation using uplink/downlink pilot signals. However, hardware impairments (HWIs) (such as phase noise and mutual coupling) distort the signals at both the trans…
▽ More
Localization is envisioned as a key enabler to satisfy the requirements of communication and context-aware services in the fifth/sixth generation (5G/6G) communication systems. User localization can be achieved based on delay and angle estimation using uplink/downlink pilot signals. However, hardware impairments (HWIs) (such as phase noise and mutual coupling) distort the signals at both the transmitter and receiver sides and thus affect the localization performance. While this impact can be ignored at lower frequencies with less severe HWIs, and less stringent localization requirements, modeling and analysis efforts are needed for high-frequency bands to assess degradation in localization accuracy due to HWIs. In this work, we model various types of impairments for a mmWave multiple-input-multiple-output communication system and conduct a misspecified Cramér-Rao bound analysis to evaluate HWI-induced performance losses in terms of angle/delay estimation and the resulting 3D position/orientation estimation error. We also investigate the effect of individual and overall HWIs on communication in terms of symbol error rate (SER). Our extensive simulation results demonstrate that each type of HWI leads to a different level of degradation in angle and delay estimation performance, and the prominent impairment factors on delay estimation will have a dominant negative effect on SER.
△ Less
Submitted 14 December, 2023; v1 submitted 3 January, 2023;
originally announced January 2023.
-
Positioning and Sensing in 6G: Gaps, Challenges, and Opportunities
Authors:
Ali Behravan,
Vijaya Yajnanarayana,
Musa Furkan Keskin,
Hui Chen,
Deep Shrestha,
Traian E. Abrudan,
Tommy Svensson,
Kim Schindhelm,
Andreas Wolfgang,
Simon Lindberg,
Henk Wymeersch
Abstract:
Among the key differentiators of 6G compared to 5G will be the increased emphasis on radio based positioning and sensing. These will be utilized not only for conventional location-aware services and for enhancing communication performance, but also to support new use case families with extreme performance requirements. This paper presents a unified vision from stakeholders across the value chain i…
▽ More
Among the key differentiators of 6G compared to 5G will be the increased emphasis on radio based positioning and sensing. These will be utilized not only for conventional location-aware services and for enhancing communication performance, but also to support new use case families with extreme performance requirements. This paper presents a unified vision from stakeholders across the value chain in terms of both opportunities and challenges for 6G positioning and sensing, as well as use cases, performance requirements, and gap analysis. Combined, this motivates the technical advances in 6G and guides system design.
△ Less
Submitted 2 November, 2022;
originally announced November 2022.
-
Probabilistic 5G Indoor Positioning Proof of Concept with Outlier Rejection
Authors:
Marcus Henninger,
Traian E. Abrudan,
Silvio Mandelli,
Maximilian Arnold,
Stephan Saur,
Veli-Matti Kolmonen,
Siegfried Klein,
Thomas Schlitter,
Stephan ten Brink
Abstract:
The continuously increasing bandwidth and antenna aperture available in wireless networks laid the foundation for developing competitive positioning solutions relying on communications standards and hardware. However, poor propagation conditions such as non-line of sight (NLOS) and rich multipath still pose many challenges due to outlier measurements that significantly degrade the positioning perf…
▽ More
The continuously increasing bandwidth and antenna aperture available in wireless networks laid the foundation for developing competitive positioning solutions relying on communications standards and hardware. However, poor propagation conditions such as non-line of sight (NLOS) and rich multipath still pose many challenges due to outlier measurements that significantly degrade the positioning performance. In this work, we introduce an iterative positioning method that reweights the time of arrival (ToA) and angle of arrival (AoA) measurements originating from multiple locators in order to efficiently remove outliers. In contrast to existing approaches that typically rely on a single locator to set the time reference for the time difference of arrival (TDoA) measurements corresponding to the remaining locators, and whose measurements may be unreliable, the proposed iterative approach does not rely on a reference locator only. The resulting robust position estimate is then used to initialize a computationally efficient gradient search to perform maximum likelihood position estimation. Our proposal is validated with an experimental setup at 3.75 GHz with 5G numerology in an indoor factory scenario, achieving an error of less than 50 cm in 95% of the measurements. To the best of our knowledge, this paper describes the first proof of concept for 5G-based joint ToA and AoA localization.
△ Less
Submitted 18 July, 2022;
originally announced July 2022.
-
6G Radio Requirements to Support Integrated Communication, Localization, and Sensing
Authors:
Henk Wymeersch,
Aarno Pärssinen,
Traian E. Abrudan,
Andreas Wolfgang,
Katsuyuki Haneda,
Muris Sarajlic,
Marko E. Leinonen,
Musa Furkan Keskin,
Hui Chen,
Simon Lindberg,
Pekka Kyösti,
Tommy Svensson,
Xinxin Yang
Abstract:
6G will be characterized by extreme use cases, not only for communication, but also for localization, and sensing. The use cases can be directly mapped to requirements in terms of standard key performance indicators (KPIs), such as data rate, latency, or localization accuracy. The goal of this paper is to go one step further and map these standard KPIs to requirements on signals, on hardware archi…
▽ More
6G will be characterized by extreme use cases, not only for communication, but also for localization, and sensing. The use cases can be directly mapped to requirements in terms of standard key performance indicators (KPIs), such as data rate, latency, or localization accuracy. The goal of this paper is to go one step further and map these standard KPIs to requirements on signals, on hardware architectures, and on deployments. Based on this, system solutions can be identified that can support several use cases simultaneously. Since there are several ways to meet the KPIs, there is no unique solution and preferable configurations will be discussed.
△ Less
Submitted 22 May, 2022;
originally announced May 2022.
-
Unitary Checkerboard Precoded OFDM for Low-PAPR Optical Wireless Communications
Authors:
Traian E. Abrudan,
Stepan Kucera,
Holger Claussen
Abstract:
Future 6G wireless networks will once again have to raise the capability in most of the technology domains by a factor of 10-100. Depending on the application, future requirements include peak data rates of 1Tb/s per user, 0.1ms latency, less than 1 out of a million outage, centimetre accurate positioning, near zero energy consumption at the device, and operation in different environments includin…
▽ More
Future 6G wireless networks will once again have to raise the capability in most of the technology domains by a factor of 10-100. Depending on the application, future requirements include peak data rates of 1Tb/s per user, 0.1ms latency, less than 1 out of a million outage, centimetre accurate positioning, near zero energy consumption at the device, and operation in different environments including factories, vehicles, and more. Optical wireless communications (OWC) have the potential to provide ultra-high data rates in a cost effective way, thanks to the vast and freely available light spectrum, and the availability of devices for transmitters and receivers. 5G NR architecture permits the integration of stand-alone OWC nodes on network layer. Current 6G research investigates advanced physical layer designs including OWC-compatible waveforms. In this context, in this paper a new pre-coded orthogonal frequency division multiplexing (OFDM) waveform is proposed that is tailored to the OWC specific needs. Its prime advantage compared to OFDM is the ultra-low peak-to-average power ratio (PAPR), while preserving other benefits, such as high spectral efficiency, flexible subcarrier nulling, and low computational complexity.
△ Less
Submitted 6 October, 2021;
originally announced October 2021.
-
Experimental Study on Probabilistic ToA and AoA Joint Localization in Real Indoor Environments
Authors:
Chunhua Geng,
Traian E. Abrudan,
Veli-Matti Kolmonen,
Howard Huang
Abstract:
In this paper, we study probabilistic time-of-arrival (ToA) and angle-of-arrival (AoA) joint localization in real indoor environments. To mitigate the effects of multipath propagation, the joint localization algorithm incorporates into the likelihood function Gaussian mixture models (GMM) and the Von Mises-Fisher distribution to model time bias errors and angular uncertainty, respectively. We eval…
▽ More
In this paper, we study probabilistic time-of-arrival (ToA) and angle-of-arrival (AoA) joint localization in real indoor environments. To mitigate the effects of multipath propagation, the joint localization algorithm incorporates into the likelihood function Gaussian mixture models (GMM) and the Von Mises-Fisher distribution to model time bias errors and angular uncertainty, respectively. We evaluate the algorithm performance using a proprietary prototype deployed in an indoor factory environment with infrastructure receivers in each of the four corners at the ceiling of a 10 meter by 20 meter section. The field test results show that our joint probabilistic localization algorithm significantly outperforms baselines using only ToA or AoA measurements and achieves 2-D sub-meter accuracy at the 90%-ile. We also numerically demonstrate that the joint localization algorithm is more robust to synchronization errors than the baseline using ToA measurements only.
△ Less
Submitted 31 March, 2021; v1 submitted 22 February, 2021;
originally announced February 2021.
-
Sensor Fusion for Magneto-Inductive Navigation
Authors:
Johan Wahlström,
Manon Kok,
Pedro Porto Buarque de Gusmao,
Traian E. Abrudan,
Niki Trigoni,
Andrew Markham
Abstract:
Magneto-inductive navigation is an inexpensive and easily deployable solution to many of today's navigation problems. By utilizing very low frequency magnetic fields, magneto-inductive technology circumvents the problems with attenuation and multipath that often plague competing modalities. Using triaxial transmitter and receiver coils, it is possible to compute position and orientation estimates…
▽ More
Magneto-inductive navigation is an inexpensive and easily deployable solution to many of today's navigation problems. By utilizing very low frequency magnetic fields, magneto-inductive technology circumvents the problems with attenuation and multipath that often plague competing modalities. Using triaxial transmitter and receiver coils, it is possible to compute position and orientation estimates in three dimensions. However, in many situations, additional information is available that constrains the set of possible solutions. For example, the receiver may be known to be coplanar with the transmitter, or orientation information may be available from inertial sensors. We employ a maximum a posteriori estimator to fuse magneto-inductive signals with such complementary information. Further, we derive the Cramer-Rao bound for the position estimates and investigate the problem of detecting distortions caused by ferrous material. The performance of the estimator is compared to the Cramer-Rao bound and a state-of-the-art estimator using both simulations and real-world data. By fusing magneto-inductive signals with accelerometer measurements, the median position error is reduced almost by a factor of two.
△ Less
Submitted 18 September, 2019;
originally announced September 2019.
-
Impact of Rocks and Minerals on Underground Magneto-Inductive Communication and Localization
Authors:
Traian E. Abrudan,
Orfeas Kypris,
Niki Trigoni,
Andrew Markham
Abstract:
In this paper, we analyze the effect of different underground materials on very-low and low frequency magnetic fields used in the contexts of magneto-inductive localization and communication applications, respectively. We calculate the attenuation that these magnetic fields are subject to while passing through most common rocks and minerals. Knowing the attenuation properties is crucial in the des…
▽ More
In this paper, we analyze the effect of different underground materials on very-low and low frequency magnetic fields used in the contexts of magneto-inductive localization and communication applications, respectively. We calculate the attenuation that these magnetic fields are subject to while passing through most common rocks and minerals. Knowing the attenuation properties is crucial in the design of underground magneto-inductive communication systems. In addition, we provide means to predict the distortions in the magnetic field that impair localization systems. The proposed work offers basic design guidelines for communication and localization systems in terms of channel path-loss, operation frequencies and bandwidth. For the sake of the reproducibility of the results, we provide the raw data and processing source code to be used by the two research communities.
△ Less
Submitted 9 June, 2016;
originally announced June 2016.