Showing 1–39 of 39 results for author: Ballauff, M

Charge and hydration structure of dendritic polyelectrolytes: molecular simulations of polyglycerol sulphate

Authors: Rohit Nikam, Xiao Xu, Matthias Ballauff, Matej Kanduč, Joachim Dzubiella

Abstract: Macromolecules based on dendritic or hyperbranched polyelectrolytes have been emerging as high potential candidates for biomedical applications. Here we study the charge and solvation structure of dendritic polyglycerol sulphate (dPGS) of generations 0 to 3 in aqueous sodium chloride solution by explicit-solvent molecular dynamics computer simulations. We characterize dPGS by calculating several i… ▽ More Macromolecules based on dendritic or hyperbranched polyelectrolytes have been emerging as high potential candidates for biomedical applications. Here we study the charge and solvation structure of dendritic polyglycerol sulphate (dPGS) of generations 0 to 3 in aqueous sodium chloride solution by explicit-solvent molecular dynamics computer simulations. We characterize dPGS by calculating several important properties such as relevant dPGS radii, molecular distributions, the solvent accessible surface area, and the partial molecular volume. In particular, as the dPGS exhibits high charge renormalization effects, we address the challenges of how to obtain a well-defined effective charge and surface potential of dPGS for practical applications. We compare implicit- and explicit-solvent approaches in our all-atom simulations with the coarse-grained simulations from our previous work. We find consistent values for the effective electrostatic size (i.e., the location of the effective charge of a Debye--Hückel sphere) within all the approaches, deviating at most by the size of a water molecule. Finally, the excess chemical potential of water insertion into dPGS and its thermodynamic signature are presented and rationalized. △ Less

Submitted 8 October, 2020; originally announced October 2020.

Journal ref: Soft Matter, 2018, 14, 4300

Structural and Transport Properties of Li/S Battery Electrolytes: Role of the Polysulfide Species

Authors: Chanbum Park, Arne Ronneburg, Sebastian Risse, Matthias Ballauff, Matej Kanduč, Joachim Dzubiella

Abstract: Lithium--sulfur (Li/S) batteries are regarded as one of the most promising energy storage devices beyond lithium-ion batteries because of their high energy density of 2600 Wh/kg and an affordable cost of sulfur. Meanwhile, some challenges inherent to Li/S batteries remain to be tackled, for instance, the polysulfide (PS) shuttle effect, the irreversible solidification of Li$_2$S, and the volume ex… ▽ More Lithium--sulfur (Li/S) batteries are regarded as one of the most promising energy storage devices beyond lithium-ion batteries because of their high energy density of 2600 Wh/kg and an affordable cost of sulfur. Meanwhile, some challenges inherent to Li/S batteries remain to be tackled, for instance, the polysulfide (PS) shuttle effect, the irreversible solidification of Li$_2$S, and the volume expansion of the cathode material during discharge. On the molecular level, these issues originate from the structural and solubility behavior of the PS species in bulk and in the electrode confinement. In this study, we use classical molecular dynamics (MD) simulations to develop a working model for PS of different chain lengths in applied electrolyte solutions of lithium bistriflimide (LiTFSI) in 1,2-dimethoxyethane (DME) and 1,3-dioxolane (DOL) mixtures. We investigate conductivities, diffusion coefficients, solvation structures, and clustering behavior and verify our simulation model with experimental measurements available in literature and newly performed by us. Our results show that diffusion coefficients and conductivities are significantly influenced by the chain length of PS. The conductivity contribution of the short chains, like Li$_2$S$_4$, is lower than of longer PS chains, such as Li$_2$S$_6$ or Li$_2$S$_8$, despite the fact that the diffusion coefficient of Li$_2$S$_4$ is higher than for longer PS chains. The low conductivity of Li$_2$S$_4$ can be attributed to its low degree of dissociation and even to a formation of large clusters in the solution. It is also found that an addition of 1 M LiTFSI into PS solutions considerably reduces the clustering behavior. Our simulation model enables future systematic studies in various solvating and confining systems for the rational design of Li/S electrolytes. △ Less

Submitted 20 July, 2020; originally announced July 2020.

Comments: 14 pages, 9 figures

Journal ref: The Journal of Physical Chemistry C, 123, 16, 10167--10177, 2019

Enhanced Catalytic Activity of Gold@Polydopamine Nanoreactors with Multi-compartment Structure Under NIR Irradiation

Authors: Shilin Mei, Zdravko Kochovski, Rafael Roa, Sasa Gu, Xiaohui Xu, Hongtao Yu, Joachim Dzubiella, Matthias Ballauff, Yan Lu

Abstract: Photothermal conversion (PTC) nanostructures have great potential for applications in many fields, and therefore, they have attracted tremendous attention. However, the construction of a PTC nanoreactor with multi-compartment structure to achieve the combination of unique chemical properties and structural feature is still challenging due to the synthetic difficulties. Herein, we designed and synt… ▽ More Photothermal conversion (PTC) nanostructures have great potential for applications in many fields, and therefore, they have attracted tremendous attention. However, the construction of a PTC nanoreactor with multi-compartment structure to achieve the combination of unique chemical properties and structural feature is still challenging due to the synthetic difficulties. Herein, we designed and synthesized a catalytically active, PTC gold (Au)@polydopamine (PDA) nanoreactor driven by infrared irradiation using assembled PS-b-P2VP nanosphere as soft template. The particles exhibit multi-compartment structure which is revealed by 3D electron tomography characterization technique. They feature permeable shells with tunable shell thickness. Full kinetics for the reduction reaction of 4-nitrophenol has been investigated using these particles as nanoreactors and compared with other reported systems. Notably, a remarkable acceleration of the catalytic reaction upon near-infrared irradiation is demonstrated, which reveals for the first time the importance of the synergistic effect of photothermal conversion and complex inner structure to the kinetics of the catalytic reduction. The ease of synthesis and fresh insights into catalysis will promote a new platform for novel nanoreactor studies. △ Less

Submitted 24 March, 2020; originally announced March 2020.

Silver nanowires with optimized silica coating as versatile plasmonic resonators

Authors: Martin Rothe, Yuhang Zhao, Günter Kewes, Zdravko Kochovski, Wilfried Sigle, Peter A. van Aken, Christoph Koch, Matthias Ballauff, Yan Lu, Oliver Benson

Abstract: Metal nanoparticles are the most frequently used nanostructures in plasmonics. However, besides nanoparticles, metal nanowires feature several advantages for applications. Their elongation offers a larger interaction volume, their resonances can reach higher quality factors, and their mode structure provides better coupling into integrated hybrid dielectric-plasmonic circuits. It is crucial though… ▽ More Metal nanoparticles are the most frequently used nanostructures in plasmonics. However, besides nanoparticles, metal nanowires feature several advantages for applications. Their elongation offers a larger interaction volume, their resonances can reach higher quality factors, and their mode structure provides better coupling into integrated hybrid dielectric-plasmonic circuits. It is crucial though, to control the distance of the wire to a supporting substrate, to another metal layer or to active materials with sub-nanometer precision. A dielectric coating can be utilized for distance control, but it must not degrade the plasmonic properties. In this paper, we introduce a controlled synthesis and coating approach for silver nanowires to fulfill these demands. We synthesize and characterize silver nanowires of around 70 nm in diameter. These nanowires are coated with nm-sized silica shells using a modified Stöber method to achieve a homogeneous and smooth surface quality. We use transmission electron microscopy, dark-field microscopy and electron-energy loss spectroscopy to study morphology and plasmonic resonances of individual nanowires and quantify the influence of the silica coating. Thorough numerical simulations support the experimental findings showing that the coating does not deteriorate the plasmonic properties and thus introduce silver nanowires as usable building blocks for integrated hybrid plasmonic systems. △ Less

Submitted 19 November, 2018; originally announced November 2018.

Interaction of Proteins with Polyelectrolytes: A Comparison between Theory and Experiment

Authors: Xiao Xu, Stefano Angioletti-Uberti, Yan Lu, Joachim Dzubiella, Matthias Ballauff

Abstract: We discuss recent investigations of the interaction of polyelectrolytes with proteins. In particular, we review our recent studies on the interaction of simple proteins such as human serum albumin (HSA) or lysozyme with linear polyelectrolytes, charged dendrimers, charged networks, and polyelectrolyte brushes. In all cases discussed here we combined experimental work with molecular dynamics (MD) s… ▽ More We discuss recent investigations of the interaction of polyelectrolytes with proteins. In particular, we review our recent studies on the interaction of simple proteins such as human serum albumin (HSA) or lysozyme with linear polyelectrolytes, charged dendrimers, charged networks, and polyelectrolyte brushes. In all cases discussed here we combined experimental work with molecular dynamics (MD) simulations and mean-field theories. In particular, isothermal titration calorimetry (ITC) has been employed to obtain the respective binding constants Kb and the Gibbs free energy of binding. MD-simulations with explicit counterions but implicit water demonstrate that counterion release is the main driving force for the binding of proteins to strongly charged polyelectrolytes: Patches of positive charges located on the surface of the protein become a multivalent counterion of the polyelectrolyte thereby releasing a number of counterions condensed on the polyelectrolyte. The binding Gibbs free energy due to counterion release is predicted to scale with the logarithm of the salt concentration in the system which is verified both by simulations and experiment. In several cases, namely for the interaction of proteins with linear polyelectrolytes and highly charged hydrophilic dendrimers the binding constant could be calculated from simulations in very good approximation. This finding demonstrated that in these cases explicit hydration effects do not contribute to the Gibbs free energy of binding. The Gibbs free energy can also be used to predict the kinetics of protein uptake by microgels for a given system by applying dynamic density functional theory. △ Less

Submitted 8 October, 2018; originally announced October 2018.

Comments: Langmuir,2018, Article ASAP

Catalysis by metallic nanoparticles in solution: Thermosensitive microgels as nanoreactors

Authors: Rafael Roa, Stefano Angioletti-Uberti, Yan Lu, Joachim Dzubiella, Francesco Piazza, Matthias Ballauff

Abstract: Metallic nanoparticles have been used as catalysts for various reactions, and the huge literature on the subject is hard to overlook. In many applications, the nanoparticles must be affixed to a colloidal carrier for easy handling during catalysis. These "passive carriers" (e.g., dendrimers) serve for a controlled synthesis of the nanoparticles and prevent coagulation during catalysis. Recently, h… ▽ More Metallic nanoparticles have been used as catalysts for various reactions, and the huge literature on the subject is hard to overlook. In many applications, the nanoparticles must be affixed to a colloidal carrier for easy handling during catalysis. These "passive carriers" (e.g., dendrimers) serve for a controlled synthesis of the nanoparticles and prevent coagulation during catalysis. Recently, hybrids from nanoparticles and polymers have been developed that allow us to change the catalytic activity of the nanoparticles by external triggers. In particular, single nanoparticles embedded in a thermosensitive network made from poly(N-isopropylacrylamide) (PNIPAM) have become the most-studied examples of such hybrids: Immersed in cold water, the PNIPAM network is hydrophilic and fully swollen. In this state, hydrophilic substrates can diffuse easily through the network, and react at the surface of the nanoparticles. Above the volume transition located at 32°C, the network becomes hydrophobic and shrinks. Now hydrophobic substrates will preferably diffuse through the network and react with other substrates in the reaction catalyzed by the enclosed nanoparticle. Such "active carriers", may thus be viewed as true nanoreactors that open new ways for the use of nanoparticles in catalysis. △ Less

Submitted 7 February, 2018; originally announced February 2018.

Comments: Review paper, 49 pages, 12 figures

Journal ref: Z. Phys. Chem., 2018

Counterion-release entropy governs the inhibition of serum proteins by polyelectrolyte drugs

Authors: Xiao Xu, Qidi Ran, Pradip Dey, Rohit Nikam, Rainer Haag, Matthias Ballauff, Joachim Dzubiella

Abstract: Dendritic polyelectrolytes constitute high potential drugs and carrier systems for biomedical purposes, still their biomolecular interaction modes, in particular those determining the binding affinity to proteins, have not been rationalized. We study the interaction of the drug candidate dendritic polyglycerol sulfate (dPGS) with serum proteins using Isothermal Titration Calorimetry (ITC) interpre… ▽ More Dendritic polyelectrolytes constitute high potential drugs and carrier systems for biomedical purposes, still their biomolecular interaction modes, in particular those determining the binding affinity to proteins, have not been rationalized. We study the interaction of the drug candidate dendritic polyglycerol sulfate (dPGS) with serum proteins using Isothermal Titration Calorimetry (ITC) interpreted and complemented with molecular computer simulations. Lysozyme is first studied as a well-defined model protein to verify theoretical concepts, which are then applied to the important cell adhesion protein family of selectins. We demonstrate that the driving force of the strong complexation originates mainly from the release of only a few condensed counterions from the dPGS upon binding. The binding constant shows a surprisingly weak dependence on dPGS size (and bare charge) which can be understood by colloidal charge-renormalization effects and by the fact that the magnitude of the dominating counterion-release mechanism almost exclusively depends on the interfacial charge structure of the protein-specific binding patch. Our findings explain the high selectivity of P- and L- selectins over E-selectin for dPGS to act as a highly anti-inflammatory drug. The entire analysis demonstrates that the interaction of proteins with charged polymeric drugs can be predicted by simulations with unprecedented accuracy. Thus, our results open new perspectives for the rational design of charged polymeric drugs and carrier systems. △ Less

Submitted 11 December, 2017; originally announced December 2017.

Journal ref: Biomacromolecules, 2018, 19 (2), pp 409-416

Molecular simulations of electrolyte structure and dynamics in lithium-sulfur battery solvents

Authors: Chanbum Park, Matej Kanduč, Richard Chudoba, Arne Ronneburg, Sebastian Risse, Matthias Ballauff, Joachim Dzubiella

Abstract: The performance of modern lithium-sulfur (Li/S) battery systems critically depends on the electrolyte and solvent compositions. For fundamental molecular insights and rational guidance of experimental developments, efficient and sufficiently accurate molecular simulations are thus in urgent need. Here, we construct a molecular dynamics (MD) computer simulation model of representative state-of-the… ▽ More The performance of modern lithium-sulfur (Li/S) battery systems critically depends on the electrolyte and solvent compositions. For fundamental molecular insights and rational guidance of experimental developments, efficient and sufficiently accurate molecular simulations are thus in urgent need. Here, we construct a molecular dynamics (MD) computer simulation model of representative state-of-the art electrolyte-solvent systems for Li/S batteries constituted by lithium-bis(trifluoromethane)sulfonimide (LiTFSI) and LiNO3 electrolytes in mixtures of the organic solvents 1,2-dimethoxyethane (DME) and 1,3-dioxolane (DOL). We benchmark and verify our simulations by comparing structural and dynamic features with various available experimental reference systems and demonstrate their applicability for a wide range of electrolyte-solvent compositions. For the state-of-the-art battery solvent, we finally calculate and discuss the detailed composition of the first lithium solvation shell, the temperature dependence of lithium diffusion, as well as the electrolyte conductivities and lithium transference numbers. Our model will serve as a basis for efficient future predictions of electrolyte structure and transport in complex electrode confinements for the optimization of modern Li/S batteries (and related devices). △ Less

Submitted 25 October, 2017; originally announced October 2017.

Charged dendrimers revisited: Effective charge and surface potential of dendritic polyglycerol sulfate

Authors: Xiao Xu, Qidi Ran, Rainer Haag, Matthias Ballauff, Joachim Dzubiella

Abstract: We investigate key electrostatic features of charged dendrimers at hand of the biomedically important dendritic polyglycerol sulfate (dPGS) macromolecule using multi-scale computer simulations and Zetasizer experiments. In our simulation study, we first develop an effective mesoscale Hamiltonian specific to dPGS based on input from all-atom, explicit-water simulations of dPGS of low generation. Em… ▽ More We investigate key electrostatic features of charged dendrimers at hand of the biomedically important dendritic polyglycerol sulfate (dPGS) macromolecule using multi-scale computer simulations and Zetasizer experiments. In our simulation study, we first develop an effective mesoscale Hamiltonian specific to dPGS based on input from all-atom, explicit-water simulations of dPGS of low generation. Employing this in coarse-grained, implicit-solvent/explicit-salt Langevin dynamics simulations, we then study dPGS structural and electrostatic properties up to the sixth generation. By systematically mapping then the calculated electrostatic potential onto the Debye-Hückel form -- that serves as a basic defining equation for the effective charge -- we determine well-defined effective net charges and corresponding radii, surface charge densities, and surface potentials of dPGS. The latter are found to be up to one order of magnitude smaller than the bare values and consistent with previously derived theories on charge renormalization and weak saturation for high dendrimer generations (charges). Finally, we find that the surface potential of the dendrimers estimated from the simulations compare very well with our new electrophoretic experiments. △ Less

Submitted 2 June, 2017; originally announced June 2017.

Journal ref: Macromolecules, 50 (12), pp 4759-4769 (2017)

Interaction of charged patchy protein models with like-charged polyelectrolyte brushes

Authors: Cemil Yigit, Matej Kanduc, Matthias Ballauff, Joachim Dzubiella

Abstract: We study the adsorption of charged patchy particle models (CPPMs) on a thin film of a like-charged and dense polyelectrolyte (PE) brush (of 50 monomers per chain) by means of implicit-solvent, explicit-salt Langevin dynamics computer simulations. Our previously introduced set of CPPMs embraces well-defined one-, and two-patched spherical globules, each of the same net charge and (nanometer) size,… ▽ More We study the adsorption of charged patchy particle models (CPPMs) on a thin film of a like-charged and dense polyelectrolyte (PE) brush (of 50 monomers per chain) by means of implicit-solvent, explicit-salt Langevin dynamics computer simulations. Our previously introduced set of CPPMs embraces well-defined one-, and two-patched spherical globules, each of the same net charge and (nanometer) size, with mono- and multipole moments comparable to those of small globular proteins. We focus on electrostatic effects on the adsorption far away from the isoelectric point of typical proteins, i.e., where charge regulation plays no role. Despite the same net charge of the brush and globule we observe large binding affinities up to tens of the thermal energy, kT, which are enhanced by decreasing salt concentration and increasing charge of the patch(es). Our analysis of the distance-resolved potentials of mean force together with a phenomenological description of all leading interaction contributions shows that the attraction is strongest at the brush surface, driven by multipolar, Born (self-energy), and counterion-release contributions, dominating locally over the monopolar and steric repulsions. △ Less

Submitted 10 January, 2017; originally announced January 2017.

Comments: 16 pages, 8 figures, 2 tables

Journal ref: Langmuir 2017, 33, 417-427

Reaction rate of a composite core-shell nanoreactor with multiple, spatially distributed embedded nano-catalysts

Authors: Marta Galanti, Duccio Fanelli, Stefano Angioletti-Uberti, Matthias Ballauff, Joachim Dzubiella, Francesco Piazza

Abstract: We present a detailed theory for the total reaction rate constant of a composite core-shell nanoreactor, consisting of a central solid core surrounded by a hydrogel layer of variable thickness, where a given number of small catalytic nanoparticles are embedded at prescribed positions and are endowed with a prescribed surface reaction rate constant. Besides the precise geometry of the assembly, our… ▽ More We present a detailed theory for the total reaction rate constant of a composite core-shell nanoreactor, consisting of a central solid core surrounded by a hydrogel layer of variable thickness, where a given number of small catalytic nanoparticles are embedded at prescribed positions and are endowed with a prescribed surface reaction rate constant. Besides the precise geometry of the assembly, our theory accounts explicitly for the diffusion coefficients of the reactants in the hydrogel and in the bulk as well as for their transfer free energy jump upon entering the hydrogel shell. Moreover, we work out an approximate analytical formula for the overall rate constant, which is valid in the physically relevant range of geometrical and chemical parameters. We discuss in depth how the diffusion-controlled part of the rate depends on the essential variables, including the size of the central core. In particular, we derive some simple rules for estimating the number of nanocatalysts per nanoreactor for an efficient catalytic performance in the case of small to intermediate core sizes. Our theoretical treatment promises to provide a very useful and flexible tool for the design of superior performing nanoreactor geometries and with optimized nanoparticle load. △ Less

Submitted 23 July, 2016; originally announced July 2016.

Comments: 12 pages, 3 figures, Physical Chemistry Chemical Physics, 2016

Thermosensitive Cu2O-PNIPAM core-shell nanoreactors with tunable photocatalytic activity

Authors: He Jia, Rafael Roa, Stefano Angioletti-Uberti, Katja Henzler, Andreas Ott, Xianzhong Lin, Jannik Möser, Zdravko Kochovski, Alexander Schnegg, Joachim Dzubiella, Matthias Ballauff, Yan Lu

Abstract: We report a facile and novel method for the fabrication of Cu2O@PNIPAM core-shell nanoreactors using Cu2O nanocubes as the core. The PNIPAM shell not only effectively protects the Cu2O nanocubes from oxidation, but also improves the colloidal stability of the system. The Cu2O@PNIPAM core-shell microgels can work efficiently as photocatalyst for the decomposition of methyl orange under visible ligh… ▽ More We report a facile and novel method for the fabrication of Cu2O@PNIPAM core-shell nanoreactors using Cu2O nanocubes as the core. The PNIPAM shell not only effectively protects the Cu2O nanocubes from oxidation, but also improves the colloidal stability of the system. The Cu2O@PNIPAM core-shell microgels can work efficiently as photocatalyst for the decomposition of methyl orange under visible light. A significant enhancement in the catalytic activity has been observed for the core-shell microgels compared with the pure Cu2O nanocubes. Most importantly, the photocatalytic activity of the Cu2O nanocubes can be further tuned by the thermosensitive PNIPAM shell, as rationalized by our recent theory. △ Less

Submitted 14 June, 2016; originally announced June 2016.

Comments: 8 pages, 6 figures (Supporting Information included: 11 pages, 10 figures)

Journal ref: J. Mater. Chem. A, 2016, 4, 9677-9684

Nonequilibrium Structure of Colloidal Dumbbells under Oscillatory Shear

Authors: Nils Heptner, Fangfang Chu, Yan Lu, Peter Lindner, Matthias Ballauff, Joachim Dzubiella

Abstract: We investigate the nonequilibrium behavior of dense, plastic-crystalline suspensions of mildly anisotropic colloidal hard dumbbells under the action of an oscillatory shear field by employing Brownian dynamics computer simulations. In particular, we extend previous investigations, where we uncovered novel nonequilibrium phase transitions, to other aspect ratios and to a larger nonequilibrium param… ▽ More We investigate the nonequilibrium behavior of dense, plastic-crystalline suspensions of mildly anisotropic colloidal hard dumbbells under the action of an oscillatory shear field by employing Brownian dynamics computer simulations. In particular, we extend previous investigations, where we uncovered novel nonequilibrium phase transitions, to other aspect ratios and to a larger nonequilibrium parameter space, that is, a wider range of strains and shear frequencies. We compare and discuss selected results in the context of novel scattering and rheological experiments. Both simulations and experiments demonstrate that the previously found transitions from the plastic crystal phase with increasing shear strain also occur at other aspect ratios. We explore the transition behavior in the strain-frequency phase and summarize it in a nonequilibrium phase diagram. Additionally, the experimental rheology results hint at a slowing down of the colloidal dynamics with higher aspect ratio. △ Less

Submitted 3 November, 2015; v1 submitted 2 September, 2015; originally announced September 2015.

Journal ref: Phys. Rev. E 92, 052311 (2015)

Theory of Solvation-Controlled Reactions in Stimuli-Responsive Nanoreactors

Authors: Stefano Angioletti-Uberti, Yan Lu, Matthias Ballauff, Joachim Dzubiella

Abstract: Metallic nanoparticles embedded in stimuli-responsive polymers can be regarded as nanoreactors since their catalytic activity can be changed within wide limits: the physicochemical properties of the polymer network can be tuned and switched by external parameters, e.g. temperature or pH, and thus allows a selective control of reactant mobility and concentration close to the reaction site. Based on… ▽ More Metallic nanoparticles embedded in stimuli-responsive polymers can be regarded as nanoreactors since their catalytic activity can be changed within wide limits: the physicochemical properties of the polymer network can be tuned and switched by external parameters, e.g. temperature or pH, and thus allows a selective control of reactant mobility and concentration close to the reaction site. Based on a combination of Debye's model of diffusion through an energy landscape and a two-state model for the polymer, here we develop an analytical expression for the observed reaction rate constant $k_{\rm obs}$. Our formula shows an exponential dependence of this rate on the solvation free enthalpy change $Δでるた\bar{G}_{\rm sol}$, a quantity which describes the partitioning of the reactant in the network versus bulk. Thus, changes in $Δでるた\bar{G}_{\rm sol}$, and not in the diffusion coefficient, will be the decisive factor affecting the reaction rate in most cases. A comparison with recent experimental data on switchable, thermosensitive nanoreactors demonstrates the general validity of the concept. △ Less

Submitted 21 July, 2015; originally announced July 2015.

Journal ref: J. Phys. Chem. C. 119 (27), pp 15723-15730, 2015

Interaction of Human Serum Albumin with short Polyelectrolytes: A study by Calorimetry and Computer Simulation

Authors: Shun Yu, Xiao Xu, Cemil Yigit, Markus van der Giet, Walter Zidek, Joachim Jankowski, Joachim Dzubiella, Matthias Ballauff

Abstract: We present a comprehensive study of the interaction of human serum albumin (HSA) with poly(acrylic acid) (PAA; number average degree of polymerization: 25) in aqueous solution. The interaction of HSA with PAA is studied in dilute solution as the function of the concentration of added salt (20 - 100 mM) and temperature (25 - 37$^{\circ}$C). Isothermal titration calorimetry (ITC) is used to analyze… ▽ More We present a comprehensive study of the interaction of human serum albumin (HSA) with poly(acrylic acid) (PAA; number average degree of polymerization: 25) in aqueous solution. The interaction of HSA with PAA is studied in dilute solution as the function of the concentration of added salt (20 - 100 mM) and temperature (25 - 37$^{\circ}$C). Isothermal titration calorimetry (ITC) is used to analyze the interaction and to determine the binding constant and related thermodynamic data. It is found that only one PAA chain is bound per HSA molecule. The free energy of binding $ΔでるたG_b$ increases with temperature significantly. $ΔでるたG_b$ decreases with increasing salt concentration and is dominated by entropic contributions due to the release of bound counterions. Coarse-grained Langevin computer simulations treating the counterions in an explicit manner are used study the process of binding in detail. These simulations demonstrate that the PAA chains are bound in the Sudlow II site of the HSA. Moreover, $ΔでるたG_b$ is calculated from the simulations and found to be in very good agreement with the measured data. The simulations demonstrate clearly that the driving force of binding is the release of counterions in full agreement with the ITC-data. △ Less

Submitted 10 July, 2015; originally announced July 2015.

Journal ref: Soft Matter, 2015, 11, 4630 - 4639

Dynamic density functional theory of protein adsorption on polymer-coated nanoparticles

Authors: Stefano Angioletti-Uberti, Matthias Ballauff, Joachim Dzubiella

Abstract: We present a theoretical model for the description of the adsorption kinetics of globular proteins onto charged core-shell microgel particles based on Dynamic Density Functional Theory (DDFT). This model builds on a previous description of protein adsorption thermodynamics [Yigit \textit{et al}, Langmuir 28 (2012)], shown to well interpret the available calorimetric experimental data of binding is… ▽ More We present a theoretical model for the description of the adsorption kinetics of globular proteins onto charged core-shell microgel particles based on Dynamic Density Functional Theory (DDFT). This model builds on a previous description of protein adsorption thermodynamics [Yigit \textit{et al}, Langmuir 28 (2012)], shown to well interpret the available calorimetric experimental data of binding isotherms. In practice, a spatially-dependent free-energy functional including the same physical interactions is built, and used to study the kinetics via a generalised diffusion equation. To test this model, we apply it to the case study of Lysozyme adsorption on PNIPAM coated nanoparticles, and show that the dynamics obtained within DDFT is consistent with that extrapolated from experiments. We also perform a systematic study of the effect of various parameters in our model, and investigate the loading dynamics as a function of proteins' valence and hydrophobic adsorption energy, as well as their concentration and that of the nanoparticles. Although we concentrated here on the case of adsorption for a single protein type, the model's generality allows to study multi-component system, providing a reliable instrument for future studies of competitive and cooperative adsorption effects often encountered in protein adsorption experiments. △ Less

Submitted 30 July, 2014; v1 submitted 11 June, 2014; originally announced June 2014.

Comments: Submitted to Soft Matter

Colloidal gelation with variable attraction energy

Authors: Alessio Zaccone, Jerome J. Crassous, Matthias Ballauff

Abstract: We present an approximation scheme to the master kinetic equations for aggregation and gelation with thermal breakup in colloidal systems with variable attraction energy. With the cluster fractal dimension $d_{f}$ as the only phenomenological parameter, rich physical behavior is predicted. The viscosity, the gelation time and the cluster size are predicted in closed form analytically as a function… ▽ More We present an approximation scheme to the master kinetic equations for aggregation and gelation with thermal breakup in colloidal systems with variable attraction energy. With the cluster fractal dimension $d_{f}$ as the only phenomenological parameter, rich physical behavior is predicted. The viscosity, the gelation time and the cluster size are predicted in closed form analytically as a function of time, initial volume fraction and attraction energy by combining the reversible clustering kinetics with an approximate hydrodynamic model. The fractal dimension $d_{f}$ modulates the time evolution of cluster size, lag time and gelation time and of the viscosity. The gelation transition is strongly nonequilibrium and time-dependent in the unstable region of the state diagram of colloids where the association rate is larger than the dissociation rate. Only upon approaching conditions where the initial association and the dissociation rates are comparable for all species (which is a condition for the detailed balance to be satisfied) aggregation can occur with $d_{f}=3$. In this limit, homogeneous nucleation followed by Lifshitz-Slyozov coarsening is recovered. In this limited region of the state diagram the macroscopic gelation process is likely to be driven by large spontaneous fluctuations associated with spinodal decomposition. △ Less

Submitted 4 April, 2013; originally announced April 2013.

Journal ref: Journal of Chemical Physics 138, 104908 (2013)

Residual Stresses in Glasses

Authors: M. Ballauff, J. M. Brader, S. U. Egelhaaf, M. Fuchs, J. Horbach, N. Koumakis, M. Krüger, M. Laurati, K. J. Mutch, G. Petekidis, M. Siebenbürger, Th. Voigtmann, J. Zausch

Abstract: The history dependence of the glasses formed from flow-melted steady states by a sudden cessation of the shear rate $\dotγがんま$ is studied in colloidal suspensions, by molecular dynamics simulations, and mode-coupling theory. In an ideal glass, stresses relax only partially, leaving behind a finite persistent residual stress. For intermediate times, relaxation curves scale as a function of $\dotγがんまt$, e… ▽ More The history dependence of the glasses formed from flow-melted steady states by a sudden cessation of the shear rate $\dotγがんま$ is studied in colloidal suspensions, by molecular dynamics simulations, and mode-coupling theory. In an ideal glass, stresses relax only partially, leaving behind a finite persistent residual stress. For intermediate times, relaxation curves scale as a function of $\dotγがんまt$, even though no flow is present. The macroscopic stress evolution is connected to a length scale of residual liquefaction displayed by microscopic mean-squared displacements. The theory describes this history dependence of glasses sharing the same thermodynamic state variables, but differing static properties. △ Less

Submitted 15 February, 2013; originally announced February 2013.

Comments: submitted to Physical Review

Stress-strain relations in bulk metallic glasses and colloidal dispersions

Authors: C. P. Amann, M. Ballauff, S. U. Egelhaaf, S. Fritschi, M. Fuchs, M. Krüger, M. Laurati, K. J. Mutch, K. Samwer, M. Siebenbürger, Th. Voigtmann, F. Weysser

Abstract: A comparison is made between the nonlinear rheological response of bulk metallic glass formers and of colloidal dispersions. Stress-strain curves measured after switch-on of constant deformation rates are analyzed quantitatively using a schematic model of mode coupling theory generalized to homogeneous and incompressible flows. A mapping between metallic and dispersion rheology is possible when st… ▽ More A comparison is made between the nonlinear rheological response of bulk metallic glass formers and of colloidal dispersions. Stress-strain curves measured after switch-on of constant deformation rates are analyzed quantitatively using a schematic model of mode coupling theory generalized to homogeneous and incompressible flows. A mapping between metallic and dispersion rheology is possible when stresses are rescaled by an entropic scale, accumulated strains by geometrical factors, and rates by the intrinsic relaxation time. Exploiting this similarity and the possibility to directly observe individual colloidal particles, we investigate the structural distortions in the colloidal system using confocal microscopy. The distortions exhibit the (from elasticity theory) expected quadrupolar but also a strong isotropic component. △ Less

Submitted 28 September, 2017; v1 submitted 8 February, 2013; originally announced February 2013.

Comments: This paper has been withdrawn because the underlying cooperation has ended and an updated theoretical description has been published elsewhere

Overshoots in stress strain curves: Colloid experiments and schematic mode coupling theory

Authors: Christian P. Amann, Miriam Siebenbürger, Matthias Krüger, Fabian Weysser, Matthias Ballauff, Matthias Fuchs

Abstract: The stress versus strain curves in dense colloidal dispersions under start-up shear flow are investigated combining experiments on model core-shell microgels, computer simulations of hard disk mixtures, and mode coupling theory. In dense fluid and glassy states, the transient stresses exhibit first a linear increase with the accumulated strain, then a maximum ('stress overshoot') for strain values… ▽ More The stress versus strain curves in dense colloidal dispersions under start-up shear flow are investigated combining experiments on model core-shell microgels, computer simulations of hard disk mixtures, and mode coupling theory. In dense fluid and glassy states, the transient stresses exhibit first a linear increase with the accumulated strain, then a maximum ('stress overshoot') for strain values around 5%, before finally approaching the stationary value, which makes up the flow curve. These phenomena arise in well-equilibrated systems and for homogeneous flows, indicating that they are generic phenomena of the shear-driven transient structural relaxation. Microscopic mode coupling theory (generalized to flowing states by integration through the transients) derives them from the transient stress correlations, which first exhibit a plateau (corresponding to the solid-like elastic shear modulus) at intermediate times, and then negative stress correlations during the final decay. We introduce and validate a schematic model within mode coupling theory which captures all of these phenomena and handily can be used to jointly analyse linear and large-amplitude moduli, flow curves, and stress-strain curves. This is done by introducing a new strain- and time-dependent vertex into the relation between the the generalized shear modulus and the transient density correlator. △ Less

Submitted 29 November, 2012; originally announced November 2012.

Comments: 21 pages, 13 figures

Journal ref: J. Rheol. 57, 149-175 (2013)

Sorption of proteins to charged microgels: characterizing binding isotherms and driving forces

Authors: Cemil Yigit, Nicole Welsch, Matthias Ballauff, Joachim Dzubiella

Abstract: We present a set of Langmuir binding models in which electrostatic cooperativity effects to protein sorption is incorporated in the spirit of Guoy-Chapman-Stern models, where the global substrate (microgel) charge state is modified by bound reactants (charged proteins). Application of this approach to lysozyme sorption to oppositely charged core-shell microgels allows us to extract the intrinsic,… ▽ More We present a set of Langmuir binding models in which electrostatic cooperativity effects to protein sorption is incorporated in the spirit of Guoy-Chapman-Stern models, where the global substrate (microgel) charge state is modified by bound reactants (charged proteins). Application of this approach to lysozyme sorption to oppositely charged core-shell microgels allows us to extract the intrinsic, binding affinity of the protein to the gel, which is salt-concentration independent and mostly hydrophobic in nature. The total binding affinity is found to be mainly electrostatic in nature, changes many orders of magnitude during the sorption process, and is significantly influenced by osmotic deswelling effects. The intrinsic binding affinity is determined to be about 7 kBT for our system. We additionally show that Langmuir binding models and those based on excludedvolume interactions are formally equivalent for low to moderate protein packing, if the nature of the bound state is consistently defined. Having appreciated this, a more quantitative interpretation of binding isotherms in terms of separate physical interactions is possible in future for a wide variety of experimental approaches. △ Less

Submitted 13 September, 2012; originally announced September 2012.

Comments: to appear in Langmuir

Quantifying the Reversible Association of Thermosensitive Nanoparticles

Authors: Alessio Zaccone, Jerome J. Crassous, Benjamin Béri, Matthias Ballauff

Abstract: Under many conditions, biomolecules and nanoparticles associate by means of attractive bonds, due to hydrophobic attraction. Extracting the microscopic association or dissociation rates from experimental data is complicated by the dissociation events and by the sensitivity of the binding force to temperature (T). Here we introduce a theoretical model that combined with light-scattering experiments… ▽ More Under many conditions, biomolecules and nanoparticles associate by means of attractive bonds, due to hydrophobic attraction. Extracting the microscopic association or dissociation rates from experimental data is complicated by the dissociation events and by the sensitivity of the binding force to temperature (T). Here we introduce a theoretical model that combined with light-scattering experiments allows us to quantify these rates and the reversible binding energy as a function of T. We apply this method to the reversible aggregation of thermoresponsive polystyrene/poly(N-isopropylacrylamide) core-shell nanoparticles, as a model system for biomolecules. We find that the binding energy changes sharply with T, and relate this remarkable switchable behavior to the hydrophobic-hydrophilic transition of the thermosensitive nanoparticles. △ Less

Submitted 12 October, 2011; originally announced October 2011.

Journal ref: Phys. Rev. Lett. 107, 168303 (2011)

Annealing of single lamella nanoparticles of polyethylene

Authors: Christophe N. Rochette, Sabine Rosenfeldt, Katja Henzler, Frank Polzer, Matthias Ballauff, Qiong Tong, Stefan Mecking, Markus Drechsler, Theyencheri Narayanan, Ludger Harnau

Abstract: We study the change of the size and structure of freely suspended single lamella nanoparticles of polyethylene during thermal annealing in aqueous solutions. Using small-angle x-ray scattering and cryogenic transmission electron microscopy, it is shown that a doubling of the crystalline lamella sandwiched between two amorphous polymer layers is obtained by annealing the nanoparticles at 125 C. Thi… ▽ More We study the change of the size and structure of freely suspended single lamella nanoparticles of polyethylene during thermal annealing in aqueous solutions. Using small-angle x-ray scattering and cryogenic transmission electron microscopy, it is shown that a doubling of the crystalline lamella sandwiched between two amorphous polymer layers is obtained by annealing the nanoparticles at 125 C. This thickening of the crystalline lamella can be understood in terms of an unlooping of polymer chains within a single nanoparticle. In addition a variation of the annealing temperature from 90 C to 115 C demonstrates that the inverse of the crystalline lamellar thickness increases linearly with the annealing temperatures leading to a recrystallization line in a Gibbs-Thomson graph. Since the nanoparticles consist of about only eight polymer chains, they can be considered as a ideal candidates for the experimental realization of equilibrium polymer crystals. △ Less

Submitted 5 July, 2011; originally announced July 2011.

Journal ref: Macromolecules 44, 4845, (2011)

A fluorescence correlation spectroscopy study of macromolecular tracer diffusion in polymer solutions

Authors: Ute Zettl, Matthias Ballauff, Ludger Harnau

Abstract: We discuss the manner in which the dynamics of tracer polystyrene chains varies with the concentration of matrix polystyrene chains dissolved in toluene. Using fluorescence correlation spectroscopy and theory, it is shown that the cooperative diffusion coefficient of the matrix polystyrene chains can be measured by fluorescence correlation spectroscopy in the semidilute entangled concentration reg… ▽ More We discuss the manner in which the dynamics of tracer polystyrene chains varies with the concentration of matrix polystyrene chains dissolved in toluene. Using fluorescence correlation spectroscopy and theory, it is shown that the cooperative diffusion coefficient of the matrix polystyrene chains can be measured by fluorescence correlation spectroscopy in the semidilute entangled concentration regime. In addition the self-diffusion coefficient of the tracer polystyrene chains can be detected for arbitrary concentrations. The measured cooperative diffusion coefficient is independent of the molecular weight of the tracer polystyrene chains because it is a characteristic feature of the transient entanglement network. △ Less

Submitted 30 November, 2010; originally announced November 2010.

Comments: 10 pages, 4 figures

Journal ref: J. Phys.: Condens. Matter 22, 494111 (2010)

Nonlinear response of dense colloidal suspensions under oscillatory shear: Mode-coupling theory and FT-rheology experiments

Authors: J. M. Brader, M. Siebenbuerger, M. Ballauff, K. Reinheimer, M. Wilhelm, S. J. Frey, F. Weysser, M. Fuchs

Abstract: Using a combination of theory, experiment and simulation we investigate the nonlinear response of dense colloidal suspensions to large amplitude oscillatory shear flow. The time-dependent stress response is calculated using a recently developed schematic mode-coupling-type theory describing colloidal suspensions under externally applied flow. For finite strain amplitudes the theory generates a non… ▽ More Using a combination of theory, experiment and simulation we investigate the nonlinear response of dense colloidal suspensions to large amplitude oscillatory shear flow. The time-dependent stress response is calculated using a recently developed schematic mode-coupling-type theory describing colloidal suspensions under externally applied flow. For finite strain amplitudes the theory generates a nonlinear response, characterized by significant higher harmonic contributions. An important feature of the theory is the prediction of an ideal glass transition at sufficiently strong coupling, which is accompanied by the discontinuous appearance of a dynamic yield stress. For the oscillatory shear flow under consideration we find that the yield stress plays an important role in determining the non linearity of the time-dependent stress response. Our theoretical findings are strongly supported by both large amplitude oscillatory (LAOS) experiments (with FT-rheology analysis) on suspensions of thermosensitive core-shell particles dispersed in water and Brownian dynamics simulations performed on a two-dimensional binary hard-disc mixture. In particular, theory predicts nontrivial values of the exponents governing the final decay of the storage and loss moduli as a function of strain amplitude which are in excellent agreement with both simulation and experiment. A consistent set of parameters in the presented schematic model achieves to jointly describe linear moduli, nonlinear flow curves and large amplitude oscillatory spectroscopy. △ Less

Submitted 13 October, 2010; originally announced October 2010.

Thermoresponsive Colloidal Molecules

Authors: Martin Hoffmann, Miriam Siebenbuerger, Ludger Harnau, Markus Hund, Christoph Hanske, Yan Lu, Claudia S. Wagner, Markus Drechsler, Matthias Ballauff

Abstract: We fabricated thermoresponsive colloidal molecules of ca. 250 nm size. Electron- and scanning force microscopy reveal the dumbbell-shaped morphology. The temperature dependence of the size and aspect ratio (ca. 1.4 to 1.6) is analyzed by depolarized dynamic light scattering and found to be in good agreement with microscopic evidence. We fabricated thermoresponsive colloidal molecules of ca. 250 nm size. Electron- and scanning force microscopy reveal the dumbbell-shaped morphology. The temperature dependence of the size and aspect ratio (ca. 1.4 to 1.6) is analyzed by depolarized dynamic light scattering and found to be in good agreement with microscopic evidence. △ Less

Submitted 3 May, 2010; originally announced May 2010.

Journal ref: Soft Matter 6, 1125 (2010)

Self-diffusion and Cooperative Diffusion in Semidilute Polymer Solutions as measured by Fluorescence Correlation Spectroscopy

Authors: Ute Zettl, Sebastian T. Hoffmann, Felix Koberling, Georg Krausch, Joerg Enderlein, Ludger Harnau, Matthias Ballauff

Abstract: We present a comprehensive investigation of polymer diffusion in the semidilute regime by fluorescence correlation spectroscopy (FCS) and dynamic light scattering (DLS). Using single-labeled polystyrene chains, FCS leads to the self-diffusion coefficient while DLS gives the cooperative diffusion coefficient for exactly the same molecular weights and concentrations. Using FCS we observe a new fas… ▽ More We present a comprehensive investigation of polymer diffusion in the semidilute regime by fluorescence correlation spectroscopy (FCS) and dynamic light scattering (DLS). Using single-labeled polystyrene chains, FCS leads to the self-diffusion coefficient while DLS gives the cooperative diffusion coefficient for exactly the same molecular weights and concentrations. Using FCS we observe a new fast mode in the semidilute entangled concentration regime beyond the slower mode which is due to self-diffusion. Comparison of FCS data with data obtained by DLS on the same polymers shows that the second mode observed in FCS is identical to the cooperative diffusion coefficient measured with DLS. An in-depth analysis and a comparison with current theoretical models demonstrates that the new cooperative mode observed in FCS is due to the effective long-range interaction of the chains through the transient entanglement network. △ Less

Submitted 4 February, 2010; originally announced February 2010.

Journal ref: Macromolecules 42, 9537 (2009)

Structure and interaction of flexible dendrimers in concentrated solution

Authors: S. Rosenfeldt, M. Ballauff, P. Lindner, L. Harnau

Abstract: We study the influence of mutual interaction on the conformation of flexible poly(propyleneamine) dendrimers of fourth generation in concentrated solution. Mixtures of dendrimers with protonated and deuterated end groups are investigated by small-angle neutron scattering up to volume fractions of 0.23. This value is in the range of the overlap concentration of the dendrimers. The contrast betwee… ▽ More We study the influence of mutual interaction on the conformation of flexible poly(propyleneamine) dendrimers of fourth generation in concentrated solution. Mixtures of dendrimers with protonated and deuterated end groups are investigated by small-angle neutron scattering up to volume fractions of 0.23. This value is in the range of the overlap concentration of the dendrimers. The contrast between the solute and the solvent was varied by using mixtures of protonated and deuterated solvents. This allows us to investigate the partial structure factors of the deuterated dendrimers in detail. An analysis of the measured scattering intensities reveals that the shape of the flexible dendrimers is practically independent of the concentration in contrast to the pronounced conformational changes of flexible linear polymers. △ Less

Submitted 7 July, 2009; originally announced July 2009.

Comments: 8 pages, 4 figures

Journal ref: The Journal of Chemical Physics 130, 244901 (2009)

Coupling of Rotational Motion with Shape Fluctuations of Core-shell Microgels Having Tunable Softness

Authors: S. Bolisetty, M. Hoffmann, S. Lekkala, Th. Hellweg, M. Ballauff, L. Harnau

Abstract: The influence of shape fluctuations on deformable thermosensitive microgels in aqueous solution is investigated by dynamic light scattering (DLS) and depolarized dynamic light scattering (DDLS). The systems under study consist of a solid core of polystyrene and a thermosensitive shell of cross-linked poly(N-isopropylacrylamide) (PNIPA) without and with embedded palladium nanoparticles. PNIPA is… ▽ More The influence of shape fluctuations on deformable thermosensitive microgels in aqueous solution is investigated by dynamic light scattering (DLS) and depolarized dynamic light scattering (DDLS). The systems under study consist of a solid core of polystyrene and a thermosensitive shell of cross-linked poly(N-isopropylacrylamide) (PNIPA) without and with embedded palladium nanoparticles. PNIPA is soluble in water, but has a lower critical solution temperature at 32 C (LCST). Below the LCST the PNIPA shell is swollen. Here we find that besides translational and rotational diffusion, the particles exhibit additional dynamics resulting from shape fluctuations. This leads to a pronounced apparent increase of the rotational diffusion coefficient. Above the transition temperature the shell collapses and provides a rather tight envelope of the core. In this state the dynamics of the shell is frozen and the core-shell particles behave like hard spheres. A simple physical model is presented to capture and explain the essentials of the coupling of rotational motion and shape fluctuations. △ Less

Submitted 19 February, 2009; originally announced February 2009.

Comments: 9 pages, 7 figures

Journal ref: Macromolecules 42, 1264 (2009)

Viscoelasticity and shear flow of concentrated, non-crystallizing colloidal suspensions: Comparison with Mode-Coupling Theory

Authors: Miriam Siebenbuerger, Matthias Fuchs, Henning Winter, Matthias Ballauff

Abstract: We present a comprehensive rheological study of a suspension of thermosensitive particles dispersed in water. The volume fraction of these particles can be adjusted by the temperature of the system in a continuous fashion. Due to the finite polydispersity of the particles (standard deviation: 17%), crystallization is suppressed and no fluid-crystal transition intervenes. Hence, the moduli $G'$ a… ▽ More We present a comprehensive rheological study of a suspension of thermosensitive particles dispersed in water. The volume fraction of these particles can be adjusted by the temperature of the system in a continuous fashion. Due to the finite polydispersity of the particles (standard deviation: 17%), crystallization is suppressed and no fluid-crystal transition intervenes. Hence, the moduli $G'$ and $G"$ in the linear viscoelastic regime as well as the flow curves (shear stress $σしぐま(\dotγがんま)$ as the function of the shear rate $\dotγがんま$) could be measured in the fluid region up to the vicinity of the glass transition. Moreover, flow curves could be obtained over a range of shear rates of 8 orders of magnitude while $G'$ and $G"$ could be measured spanning over 9 orders of magnitude. Special emphasis has been laid on precise measurements down to the smallest shear rates/frequencies. It is demonstrated that mode-coupling theory generalized in the integration through transients framework provides a full description of the flow curves as well as the viscoelastic behavior of concentrated suspensions with a single set of well-defined parameters. △ Less

Submitted 20 October, 2008; originally announced October 2008.

Journal ref: J. Rheol 53, 707 (2009)

Theory of Thermodynamic Stresses in Colloidal Dispersions at the Glass Transition

Authors: D. Hajnal, O. Henrich, J. J. Crassous, M. Siebenbuerger, M. Drechsler, M. Ballauff, M. Fuchs

Abstract: We discuss the nonlinear rheology of dense colloidal dispersions at the glass transition. A first principles approach starting with interacting Brownian particles in given arbitrary homogeneous (incompressible) flow neglecting hydrodynamic interactions is sketched. It e.g. explains steady state flow curves for finite shear rates measured in dense suspensions of thermosensitive core-shell particl… ▽ More We discuss the nonlinear rheology of dense colloidal dispersions at the glass transition. A first principles approach starting with interacting Brownian particles in given arbitrary homogeneous (incompressible) flow neglecting hydrodynamic interactions is sketched. It e.g. explains steady state flow curves for finite shear rates measured in dense suspensions of thermosensitive core-shell particles consisting of a polystyrene core and a crosslinked poly(N-isopropylacrylamide)(PNIPAM) shell. The exponents of simple and generalized Herschel Bulkley laws are computed for hard spheres. △ Less

Submitted 6 May, 2008; originally announced May 2008.

Comments: 3 pages, 1 figure; contribution to The XVth International Congress on Rheology, August 3-8, 2008, Monterey, California; submitted to J. Rheol

Shear stresses of colloidal dispersions at the glass transition in equilibrium and in flow

Authors: J. J. Crassous, M. Siebenbürger, M. Ballauff, M. Drechsler, D. Hajnal, O. Henrich, M. Fuchs

Abstract: We consider a model dense colloidal dispersion at the glass transition, and investigate the connection between equilibrium stress fluctuations, seen in linear shear moduli, and the shear stresses under strong flow conditions far from equilibrium, viz. flow curves for finite shear rates. To this purpose thermosensitive core-shell particles consisting of a polystyrene core and a crosslinked poly(N… ▽ More We consider a model dense colloidal dispersion at the glass transition, and investigate the connection between equilibrium stress fluctuations, seen in linear shear moduli, and the shear stresses under strong flow conditions far from equilibrium, viz. flow curves for finite shear rates. To this purpose thermosensitive core-shell particles consisting of a polystyrene core and a crosslinked poly(N-isopropylacrylamide)(PNIPAM) shell were synthesized. Data over an extended range in shear rates and frequencies are compared to theoretical results from integrations through transients and mode coupling approaches. The connection between non-linear rheology and glass transition is clarified. While the theoretical models semi-quantitatively fit the data taken in fluid states and the predominant elastic response of glass, a yet unaccounted dissipative mechanism is identified in glassy states. △ Less

Submitted 17 April, 2008; originally announced April 2008.

Comments: 17 pages, 11 figures; J. Chem. Phys. in print (2008)

Structure factor and thermodynamics of rigid dendrimers in solution

Authors: L. Harnau, S. Rosenfeldt, M. Ballauff

Abstract: The ''polymer reference interaction site model'' (PRISM) integral equation theory is used to determine the structure factor of rigid dendrimers in solution. The theory is quite successful in reproducing experimental structure factors for various dendrimer concentrations. In addition, the structure factor at vanishing scattering vector is calculated via the compressibility equation using scaled p… ▽ More The ''polymer reference interaction site model'' (PRISM) integral equation theory is used to determine the structure factor of rigid dendrimers in solution. The theory is quite successful in reproducing experimental structure factors for various dendrimer concentrations. In addition, the structure factor at vanishing scattering vector is calculated via the compressibility equation using scaled particle theory and fundamental measure theory. The results as predicted by both theories are systematically smaller than the experimental and PRISM data for platelike dendrimers. △ Less

Submitted 23 May, 2007; originally announced May 2007.

Comments: 7 pages, 5 figures, submitted

Softening of the stiffness of bottlebrush polymers by mutual interaction

Authors: S. Bolisetty, C. Airaud, Y. Xu, A. H. E. Mueller, L. Harnau, S. Rosenfeldt, P. Lindner, M. Ballauff

Abstract: We study bottlebrush macromolecules in a good solvent by small-angle neutron scattering (SANS), static light scattering (SLS), and dynamic light scattering (DLS). These polymers consist of a linear backbone to which long side chains are chemically grafted. The backbone contains about 1600 monomer units (weight average) and every second monomer unit carries side-chains with ca. 60 monomer units.… ▽ More We study bottlebrush macromolecules in a good solvent by small-angle neutron scattering (SANS), static light scattering (SLS), and dynamic light scattering (DLS). These polymers consist of a linear backbone to which long side chains are chemically grafted. The backbone contains about 1600 monomer units (weight average) and every second monomer unit carries side-chains with ca. 60 monomer units. The SLS- and SANS data extrapolated to infinite dilution lead to the form factor of the polymer that can be described in terms of a worm-like chain with a contour length of 380 nm and a persistence length of 17.5 nm. An analysis of the DLS data confirm these model parameters. The scattering intensities taken at finite concentration can be modeled using the polymer reference interaction site model. It reveals a softening of the bottlebrush polymers caused by their mutual interaction. We demonstrate that the persistence decreases from 17.5 nm down to 5 nm upon increasing the concentration from dilute solution to the highest concentration 40.59 g/l under consideration. The observed softening of the chains is comparable to the theoretically predicted decrease of the electrostatic persistence length of linear polyelectrolyte chains at finite concentrations. △ Less

Submitted 23 May, 2007; originally announced May 2007.

Comments: 4 pages, 4 figures

Journal ref: Journal-ref: Phys. Rev. E 75, 040803(R), (2007)

Effective Interaction of Charged Platelets in Aqueous Solution: Investigations of Colloid Laponite Suspensions by Static Light Scattering and Small-Angle X-Ray Scattering

Authors: Li Li, L. Harnau, S. Rosenfeldt, M. Ballauff

Abstract: We study dilute aqueous solutions of charged disk-like mineral particles (Laponite) by a combination of static light scattering (SLS) and small-angle x-ray scattering (SAXS). Laponite solutions are known to form gels above a certain critical concentration that must be described as non-equilibrium states. Here we focus on the investigation by SLS and SAXS at concentrations below gelation (c < 0.0… ▽ More We study dilute aqueous solutions of charged disk-like mineral particles (Laponite) by a combination of static light scattering (SLS) and small-angle x-ray scattering (SAXS). Laponite solutions are known to form gels above a certain critical concentration that must be described as non-equilibrium states. Here we focus on the investigation by SLS and SAXS at concentrations below gelation (c < 0.016 g/L) and at low concentrations of added salt (0.001 and 0.005 mM). Thus, we have obtained the scattering function of single Laponite platelets as well as the structure factor describing their interaction at finite concentration. A detailed analysis of the combined sets of data proves that the solutions are in a well-defined equilibrium state. Moreover, this analysis demonstrates the internal consistency and accuracy of the scattering functions obtained at finite concentrations. We find that Laponite particles interact through an effective pair potential that is attractive on short range but repulsive on longer range. This finding demonstrates that Laponite solutions exhibit only a limited stability at the concentration of added salt used herein. Raising the ionic strength to 0.005 mM already leads to slow flocculation as is evidenced from the enhanced scattering intensity at smallest scattering angles. All data strongly suggest that the gelation occurring at higher concentration is related to aggregation. △ Less

Submitted 1 August, 2005; originally announced August 2005.

Comments: 11 pages, 9 figures

Nonlinear rheology of dense colloidal dispersions: a phenomenological model and its connection to mode coupling theory

Authors: Matthias Fuchs, Matthias Ballauff

Abstract: Rheological properties, especially 'shear-thinning', of dense colloidal dispersions are discussed on three different levels. A generalized phenomonological Maxwell model gives a broad framework connecting glassy dynamics to the linear and non-linear rheology of dense amorphous particle solutions. First principles mode coupling theory calculations for the time or frequency dependent shear modulus… ▽ More Rheological properties, especially 'shear-thinning', of dense colloidal dispersions are discussed on three different levels. A generalized phenomonological Maxwell model gives a broad framework connecting glassy dynamics to the linear and non-linear rheology of dense amorphous particle solutions. First principles mode coupling theory calculations for the time or frequency dependent shear modulus give quantitative results for dispersions of hard colloidal spheres in the linear regime. Schematic models extending mode coupling theory to the non-linear regime recover the phenomenology of the generalized Maxwell model, and predict universal features of flow curves, stress versus shear-rate. △ Less

Submitted 28 February, 2005; originally announced February 2005.

Comments: 7 pages, 6 figures; to be published in the proceedings of the 18th ECIS Conference, Almeria, Spain Sept. 19-24, 2004; special issue of 'Colloids and Surfaces A: Physicochemical and Engineering Aspects'

Flow curves of dense colloidal dispersions: schematic model analysis of the shear-dependent viscosity near the colloidal glass transition

Authors: Matthias Fuchs, Matthias Ballauff

Abstract: A recently proposed schematic model for the non--linear rheology of dense colloidal dispersions is compared to flow curves measured in suspensions that consist of thermosensitive particles. The volume fraction of this purely repulsive model system can be adjusted by changing temperature. Hence, high volume fractions ($φふぁい\leq 0.63$) can be achieved in a reproducible manner. The quantitative analys… ▽ More A recently proposed schematic model for the non--linear rheology of dense colloidal dispersions is compared to flow curves measured in suspensions that consist of thermosensitive particles. The volume fraction of this purely repulsive model system can be adjusted by changing temperature. Hence, high volume fractions ($φふぁい\leq 0.63$) can be achieved in a reproducible manner. The quantitative analysis of the flow curves suggests that the theoretical approach captures the increase of the low shear viscosity with increasing density, the shear thinning for increasing shear rate, and the yielding of a soft glassy solid. Variations of the high shear viscosity can be traced back to hydrodynamic interactions which are not contained in the present approach but can be incorporated into the data analysis by an appropriate rescaling. △ Less

Submitted 18 February, 2005; originally announced February 2005.

Comments: 7 pages, 4 figures

The Osmotic Coefficient of Rod-like Polyelectrolytes: Computer Simulation, Analytical Theory, and Experiment

Authors: M. Deserno, C. Holm, J. Blaul, M. Ballauff, M. Rehahn

Abstract: The osmotic coefficient of solutions of rod-like polyelectrolytes is considered by comparing current theoretical treatments and simulations to recent experimental data. The discussion is restricted to the case of monovalent counterions and dilute, salt-free solutions. The classical Poisson-Boltzmann solution of the cell model correctly predicts a strong decrease in the osmotic coefficient, but u… ▽ More The osmotic coefficient of solutions of rod-like polyelectrolytes is considered by comparing current theoretical treatments and simulations to recent experimental data. The discussion is restricted to the case of monovalent counterions and dilute, salt-free solutions. The classical Poisson-Boltzmann solution of the cell model correctly predicts a strong decrease in the osmotic coefficient, but upon closer look systematically overestimates its value. The contribution of ion-ion-correlations are quantitatively studied by MD simulations and the recently proposed DHHC theory. However, our comparison with experimental data obtained on synthetic, stiff-chain polyelectrolytes shows that correlation effects can only partly explain the discrepancy. A quantitative understanding thus requires theoretical efforts beyond the restricted primitive model of electrolytes. △ Less

Submitted 9 May, 2001; originally announced May 2001.

Comments: 16 pages, 2 figures

Journal ref: Eur. Phys. J. E 5, 97-103 (2001)

Soft Interaction Between Dissolved Dendrimers: Theory and Experiment

Authors: C. N. Likos, M. Schmidt, H. Loewen, M. Ballauff, D. Poetschke, P. Lindner

Abstract: Using small-angle neutron scattering and liquid integral equation theory, we relate the structure factor of flexible dendrimers of 4th generation to their average shape. The shape is measured as a radial density profile of monomers belonging to a single dendrimer. From that, we derive an effective interaction of Gaussian form between pairs of dendrimers and compute the structure factor using the… ▽ More Using small-angle neutron scattering and liquid integral equation theory, we relate the structure factor of flexible dendrimers of 4th generation to their average shape. The shape is measured as a radial density profile of monomers belonging to a single dendrimer. From that, we derive an effective interaction of Gaussian form between pairs of dendrimers and compute the structure factor using the hypernetted chain approximation. Excellent agreement with the corresponding experimental results is obtained, without the use of adjustable parameters. The present analysis thus strongly supports the previous finding that flexible dendrimers of low generation present fluctuating structures akin to star polymers. △ Less

Submitted 17 October, 2000; originally announced October 2000.

Comments: 20 pages, 4 figures, submitted to Macromolecules on July 24, 2000