-
An Upper Limit on the Photoproduction Cross Section of the Spin-Exotic $π_1(1600)$
Authors:
F. Afzal,
C. S. Akondi,
M. Albrecht,
M. Amaryan,
S. Arrigo,
V. Arroyave,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
D. Barton,
V. Baturin,
V. V. Berdnikov,
T. Black,
W. Boeglin,
M. Boer,
W. J. Briscoe,
T. Britton,
S. Cao,
E. Chudakov,
G. Chung,
P. L. Cole
, et al. (124 additional authors not shown)
Abstract:
The spin-exotic hybrid meson $π_{1}(1600)$ is predicted to have a large decay rate to the $ωππ$ final state. Using 76.6~pb$^{-1}$ of data collected with the GlueX detector, we measure the cross sections for the reactions $γp \to ωπ^+ π^- p$, $γp \to ωπ^0 π^0 p$, and $γp\toωπ^-π^0Δ^{++}$ in the range $E_γ=$ 8-10 GeV. Using isospin conservation, we set the first upper limits on the photoproduction c…
▽ More
The spin-exotic hybrid meson $π_{1}(1600)$ is predicted to have a large decay rate to the $ωππ$ final state. Using 76.6~pb$^{-1}$ of data collected with the GlueX detector, we measure the cross sections for the reactions $γp \to ωπ^+ π^- p$, $γp \to ωπ^0 π^0 p$, and $γp\toωπ^-π^0Δ^{++}$ in the range $E_γ=$ 8-10 GeV. Using isospin conservation, we set the first upper limits on the photoproduction cross sections of the $π^{0}_{1}(1600)$ and $π^{-}_{1}(1600)$. We combine these limits with lattice calculations of decay widths and find that photoproduction of $η'π$ is the most sensitive two-body system to search for the $π_1(1600)$.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Measurement of Spin-Density Matrix Elements in $Δ^{++}(1232)$ photoproduction
Authors:
F. Afzal,
C. S. Akondi,
M. Albrecht,
M. Amaryan,
S. Arrigo,
V. Arroyave,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
D. Barton,
V. Baturin,
V. V. Berdnikov,
T. Black,
W. Boeglin,
M. Boer,
W. J. Briscoe,
T. Britton,
S. Cao,
E. Chudakov,
G. Chung,
P. L. Cole
, et al. (124 additional authors not shown)
Abstract:
We measure the spin-density matrix elements (SDMEs) of the $Δ^{++}(1232)$ in the photoproduction reaction $γp \to π^-Δ^{++}(1232)$ with the GlueX experiment in Hall D at Jefferson Lab. The measurement uses a linearly--polarized photon beam with energies from $8.2$ to $8.8$~GeV and the statistical precision of the SDMEs exceeds the previous measurement by three orders of magnitude for the momentum…
▽ More
We measure the spin-density matrix elements (SDMEs) of the $Δ^{++}(1232)$ in the photoproduction reaction $γp \to π^-Δ^{++}(1232)$ with the GlueX experiment in Hall D at Jefferson Lab. The measurement uses a linearly--polarized photon beam with energies from $8.2$ to $8.8$~GeV and the statistical precision of the SDMEs exceeds the previous measurement by three orders of magnitude for the momentum transfer squared region below $1.4$ GeV$^2$. The data are sensitive to the previously undetermined relative sign between couplings in existing Regge-exchange models. Linear combinations of the extracted SDMEs allow for a decomposition into natural and unnatural--exchange amplitudes. We find that the unnatural exchange plays an important role in the low momentum transfer region.
△ Less
Submitted 26 July, 2024; v1 submitted 18 June, 2024;
originally announced June 2024.
-
MPC-CBF with Adaptive Safety Margins for Safety-critical Teleoperation over Imperfect Network Connections
Authors:
Riccardo Periotto,
Mina Ferizbegovic,
Fernando S. Barbosa,
Roberto C. Sundin
Abstract:
The paper focuses on the design of a control strategy for safety-critical remote teleoperation. The main goal is to make the controlled system track the desired velocity specified by an operator while avoiding obstacles despite communication delays. Control Barrier Functions (CBFs) are used to define the safety constraints that the system has to respect to avoid obstacles, while Model Predictive C…
▽ More
The paper focuses on the design of a control strategy for safety-critical remote teleoperation. The main goal is to make the controlled system track the desired velocity specified by an operator while avoiding obstacles despite communication delays. Control Barrier Functions (CBFs) are used to define the safety constraints that the system has to respect to avoid obstacles, while Model Predictive Control (MPC) provides the framework for adjusting the desired input, taking the constraints into account. The resulting input is sent to the remote system, where appropriate low-level velocity controllers translate it into system-specific commands. The main novelty of the paper is a method to make the CBFs robust against the uncertainties caused by the network delays affecting the system's state and do so in a less conservative manner. The results show how the proposed method successfully solves the safety-critical teleoperation problem, making the controlled systems avoid obstacles with different types of network delay. The controller has also been tested in simulation and on a real manipulator, demonstrating its general applicability when reliable low-level velocity controllers are available.
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
Real-Time Line-Based Room Segmentation and Continuous Euclidean Distance Fields
Authors:
Erik Warberg,
Adam Miksits,
Fernando S. Barbosa
Abstract:
Continuous maps representations, as opposed to traditional discrete ones such as grid maps, have been gaining traction in the research community. However, current approaches still suffer from high computation costs, making them unable to be used in large environments without sacrificing precision. In this paper, a scalable method building upon Gaussian Process-based Euclidean Distance Fields (GP-E…
▽ More
Continuous maps representations, as opposed to traditional discrete ones such as grid maps, have been gaining traction in the research community. However, current approaches still suffer from high computation costs, making them unable to be used in large environments without sacrificing precision. In this paper, a scalable method building upon Gaussian Process-based Euclidean Distance Fields (GP-EDFs) is proposed. By leveraging structure inherent to indoor environments, namely walls and rooms, we achieve an accurate continuous map representation that is fast enough to be updated and used in real-time. This is possible thanks to a novel line-based room segmentation algorithm, enabling the creation of smaller local GP-EDFs for each room, which in turn also use line segments as its shape priors, thus representing the map more efficiently with fewer data points. We evaluate this method in simulation experiments, and make the code available open-source.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
Non-standard Wigner doublets
Authors:
F. A. da Silva Barbosa,
J. M. Hoff da Silva
Abstract:
Guided by a conservative formulation in investigating the physical content of quantum fields, we explore non-standard Wigner classes of particles that could provide the basis for self-interaction models to dark matter. We critically contrast the analysis with long-standing constraints to non-standard Wigner classes in the literature to discuss the model's viability.
Guided by a conservative formulation in investigating the physical content of quantum fields, we explore non-standard Wigner classes of particles that could provide the basis for self-interaction models to dark matter. We critically contrast the analysis with long-standing constraints to non-standard Wigner classes in the literature to discuss the model's viability.
△ Less
Submitted 12 December, 2023;
originally announced December 2023.
-
Autonomous driving of trucks in off-road environment
Authors:
Kenny A. Q. Caldas,
Filipe M. Barbosa,
Junior A. R. Silva,
Tiago C. Santos,
Iago P. Gomes,
Luis A. Rosero,
Denis F. Wolf,
Valdir Grassi Jr
Abstract:
Off-road driving operations can be a challenging environment for human conductors as they are subject to accidents, repetitive and tedious tasks, strong vibrations, which may affect their health in the long term. Therefore, they can benefit from a successful implementation of autonomous vehicle technology, improving safety, reducing labor costs and fuel consumption, and increasing operational effi…
▽ More
Off-road driving operations can be a challenging environment for human conductors as they are subject to accidents, repetitive and tedious tasks, strong vibrations, which may affect their health in the long term. Therefore, they can benefit from a successful implementation of autonomous vehicle technology, improving safety, reducing labor costs and fuel consumption, and increasing operational efficiency. The main contribution of this paper is the experimental validation of a path tracking control strategy, composed of longitudinal and lateral controllers, on an off-road scenario with a fully-loaded heavy-duty truck. The longitudinal control strategy relies on a Non-Linear Model Predictive Controller (NMPC), which considers the path geometry and simplified vehicle dynamics to compute a smooth and comfortable input velocity, without violating the imposed constraints. The lateral controller is based on a Robust Linear Quadratic Regulator (RLQR), which considers a vehicle model subject to parametric uncertainties to minimize its lateral displacement and heading error, as well as ensure stability. Experiments were carried out using a fully-loaded vehicle on unpaved roads in an open-pit mine. The truck followed the reference path within the imposed constraints, showing robustness and driving smoothness.
△ Less
Submitted 12 December, 2023;
originally announced December 2023.
-
Measurement of Spin-Density Matrix Elements in $ρ(770)$ Production with a Linearly Polarized Photon Beam at $E_γ= 8.2\,-\,8.8\,\text{GeV}$
Authors:
GlueX Collaboration,
S. Adhikari,
F. Afzal,
C. S. Akondi,
M. Albrecht,
M. Amaryan,
V. Arroyave,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
D. Byer,
E. Chudakov,
P. L. Cole,
O. Cortes
, et al. (128 additional authors not shown)
Abstract:
The GlueX experiment at Jefferson Lab studies photoproduction of mesons using linearly polarized $8.5\,\text{GeV}$ photons impinging on a hydrogen target which is contained within a detector with near-complete coverage for charged and neutral particles. We present measurements of spin-density matrix elements for the photoproduction of the vector meson $ρ$(770). The statistical precision achieved e…
▽ More
The GlueX experiment at Jefferson Lab studies photoproduction of mesons using linearly polarized $8.5\,\text{GeV}$ photons impinging on a hydrogen target which is contained within a detector with near-complete coverage for charged and neutral particles. We present measurements of spin-density matrix elements for the photoproduction of the vector meson $ρ$(770). The statistical precision achieved exceeds that of previous experiments for polarized photoproduction in this energy range by orders of magnitude. We confirm a high degree of $s$-channel helicity conservation at small squared four-momentum transfer $t$ and are able to extract the $t$-dependence of natural and unnatural-parity exchange contributions to the production process in detail. We confirm the dominance of natural-parity exchange over the full $t$ range. We also find that helicity amplitudes in which the helicity of the incident photon and the photoproduced $ρ(770)$ differ by two units are negligible for $-t<0.5\,\text{GeV}^{2}/c^{2}$.
△ Less
Submitted 9 July, 2024; v1 submitted 15 May, 2023;
originally announced May 2023.
-
Fast or Cheap: Time and Energy Optimal Control of Ship-to-Shore Cranes
Authors:
Filipe Marques Barbosa,
Anton Kullberg,
Johan Löfberg
Abstract:
This paper addresses the trade-off between time- and energy-efficiency for the problem of loading and unloading a ship. Container height constraints and energy consumption and regeneration are dealt with. We build upon a previous work that introduced a coordinate system suitable to deal with container avoidance constraints and incorporate the energy related modeling. In addition to changing the co…
▽ More
This paper addresses the trade-off between time- and energy-efficiency for the problem of loading and unloading a ship. Container height constraints and energy consumption and regeneration are dealt with. We build upon a previous work that introduced a coordinate system suitable to deal with container avoidance constraints and incorporate the energy related modeling. In addition to changing the coordinate system, standard epigraph reformulations result in an optimal control problem with improved numerical properties. The trade-off is dealt with through the use of weighting of the total time and energy consumption in the cost function. An illustrative example is provided, demonstrating that the energy consumption can be substantially reduced while retaining approximately the same loading time.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Measurement of the J/$ψ$ photoproduction cross section over the full near-threshold kinematic region
Authors:
GlueX Collaboration,
S. Adhikari,
F. Afzal,
C. S. Akondi,
M. Albrecht,
M. Amaryan,
V. Arroyave,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
D. Byer,
E. Chudakov,
P. L. Cole,
O. Cortes
, et al. (128 additional authors not shown)
Abstract:
We report the total and differential cross sections for $J/ψ$ photoproduction with the large acceptance GlueX spectrometer for photon beam energies from the threshold at 8.2~GeV up to 11.44~GeV and over the full kinematic range of momentum transfer squared, $t$. Such coverage facilitates the extrapolation of the differential cross sections to the forward ($t = 0$) point beyond the physical region.…
▽ More
We report the total and differential cross sections for $J/ψ$ photoproduction with the large acceptance GlueX spectrometer for photon beam energies from the threshold at 8.2~GeV up to 11.44~GeV and over the full kinematic range of momentum transfer squared, $t$. Such coverage facilitates the extrapolation of the differential cross sections to the forward ($t = 0$) point beyond the physical region. The forward cross section is used by many theoretical models and plays an important role in understanding $J/ψ$ photoproduction and its relation to the $J/ψ-$proton interaction. These measurements of $J/ψ$ photoproduction near threshold are also crucial inputs to theoretical models that are used to study important aspects of the gluon structure of the proton, such as the gluon Generalized Parton Distribution (GPD) of the proton, the mass radius of the proton, and the trace anomaly contribution to the proton mass. We observe possible structures in the total cross section energy dependence and find evidence for contributions beyond gluon exchange in the differential cross section close to threshold, both of which are consistent with contributions from open-charm intermediate states.
△ Less
Submitted 9 July, 2024; v1 submitted 7 April, 2023;
originally announced April 2023.
-
A Threefold Review on Deep Semantic Segmentation: Efficiency-oriented, Temporal and Depth-aware design
Authors:
Felipe Manfio Barbosa,
Fernando Santos Osório
Abstract:
Semantic image and video segmentation stand among the most important tasks in computer vision nowadays, since they provide a complete and meaningful representation of the environment by means of a dense classification of the pixels in a given scene. Recently, Deep Learning, and more precisely Convolutional Neural Networks, have boosted semantic segmentation to a new level in terms of performance a…
▽ More
Semantic image and video segmentation stand among the most important tasks in computer vision nowadays, since they provide a complete and meaningful representation of the environment by means of a dense classification of the pixels in a given scene. Recently, Deep Learning, and more precisely Convolutional Neural Networks, have boosted semantic segmentation to a new level in terms of performance and generalization capabilities. However, designing Deep Semantic Segmentation models is a complex task, as it may involve application-dependent aspects. Particularly, when considering autonomous driving applications, the robustness-efficiency trade-off, as well as intrinsic limitations - computational/memory bounds and data-scarcity - and constraints - real-time inference - should be taken into consideration. In this respect, the use of additional data modalities, such as depth perception for reasoning on the geometry of a scene, and temporal cues from videos to explore redundancy and consistency, are promising directions yet not explored to their full potential in the literature. In this paper, we conduct a survey on the most relevant and recent advances in Deep Semantic Segmentation in the context of vision for autonomous vehicles, from three different perspectives: efficiency-oriented model development for real-time operation, RGB-Depth data integration (RGB-D semantic segmentation), and the use of temporal information from videos in temporally-aware models. Our main objective is to provide a comprehensive discussion on the main methods, advantages, limitations, results and challenges faced from each perspective, so that the reader can not only get started, but also be up to date in respect to recent advances in this exciting and challenging research field.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Camera-Radar Perception for Autonomous Vehicles and ADAS: Concepts, Datasets and Metrics
Authors:
Felipe Manfio Barbosa,
Fernando Santos Osório
Abstract:
One of the main paths towards the reduction of traffic accidents is the increase in vehicle safety through driver assistance systems or even systems with a complete level of autonomy. In these types of systems, tasks such as obstacle detection and segmentation, especially the Deep Learning-based ones, play a fundamental role in scene understanding for correct and safe navigation. Besides that, the…
▽ More
One of the main paths towards the reduction of traffic accidents is the increase in vehicle safety through driver assistance systems or even systems with a complete level of autonomy. In these types of systems, tasks such as obstacle detection and segmentation, especially the Deep Learning-based ones, play a fundamental role in scene understanding for correct and safe navigation. Besides that, the wide variety of sensors in vehicles nowadays provides a rich set of alternatives for improvement in the robustness of perception in challenging situations, such as navigation under lighting and weather adverse conditions. Despite the current focus given to the subject, the literature lacks studies on radar-based and radar-camera fusion-based perception. Hence, this work aims to carry out a study on the current scenario of camera and radar-based perception for ADAS and autonomous vehicles. Concepts and characteristics related to both sensors, as well as to their fusion, are presented. Additionally, we give an overview of the Deep Learning-based detection and segmentation tasks, and the main datasets, metrics, challenges, and open questions in vehicle perception.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
ATHENA Detector Proposal -- A Totally Hermetic Electron Nucleus Apparatus proposed for IP6 at the Electron-Ion Collider
Authors:
ATHENA Collaboration,
J. Adam,
L. Adamczyk,
N. Agrawal,
C. Aidala,
W. Akers,
M. Alekseev,
M. M. Allen,
F. Ameli,
A. Angerami,
P. Antonioli,
N. J. Apadula,
A. Aprahamian,
W. Armstrong,
M. Arratia,
J. R. Arrington,
A. Asaturyan,
E. C. Aschenauer,
K. Augsten,
S. Aune,
K. Bailey,
C. Baldanza,
M. Bansal,
F. Barbosa,
L. Barion
, et al. (415 additional authors not shown)
Abstract:
ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its e…
▽ More
ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its expected performance in the most relevant physics channels. It includes an evaluation of detector technology choices, the technical challenges to realizing the detector and the R&D required to meet those challenges.
△ Less
Submitted 13 October, 2022;
originally announced October 2022.
-
The SDSS-Gaia View of the Color-Magnitude Relation for Blue Horizontal-branch Stars
Authors:
Fabrícia O. Barbosa,
Rafael M. Santucci,
Silvia Rossi,
Guilherme Limberg,
Angeles Pérez-Villegas,
Hélio D. Perottoni
Abstract:
We present an updated sample of blue horizontal-branch (BHB) stars selected from the photometric and spectroscopic data from Sloan Digital Sky Survey and its associated project Sloan Extension for Galactic Understanding and Exploration (SEGUE). With this data, we selected candidates for A-type stars in the color-color space and then a mixture modeling technique was implemented in order to distingu…
▽ More
We present an updated sample of blue horizontal-branch (BHB) stars selected from the photometric and spectroscopic data from Sloan Digital Sky Survey and its associated project Sloan Extension for Galactic Understanding and Exploration (SEGUE). With this data, we selected candidates for A-type stars in the color-color space and then a mixture modeling technique was implemented in order to distinguish between BHB and main-sequence/blue-straggler stars based on their surface gravity values ($\log \rm{g}$) estimated by the SEGUE Stellar Parameter Pipeline. Our robust approach allows us to attribute individual probabilities of each star truly being in the BHB stage. Hence, our method is advantageous in comparison to previous SEGUE BHB selections that adopted simple $\log \rm{g}$ cuts. We also revisit the color-magnitude relation for these stars and propose two calibrations, based on updated distances for Galactic globular clusters, to estimate absolute magnitudes with $(g-r)_0$ and $(u-r)_0$ colors.
△ Less
Submitted 17 November, 2022; v1 submitted 6 October, 2022;
originally announced October 2022.
-
Towards 1000-mode Optical Fibres
Authors:
Filipe M. Ferreira,
Fabio A. Barbosa
Abstract:
We report on the design of multimode-mode fibres guiding up to 870 spatial and polarization modes for low differential mode delay over the C-band.
We report on the design of multimode-mode fibres guiding up to 870 spatial and polarization modes for low differential mode delay over the C-band.
△ Less
Submitted 20 June, 2022;
originally announced June 2022.
-
On a Scalable Path for Multimode MIMO-DSP
Authors:
Fabio A. Barbosa,
Stefan Rothe,
Dennis Pohle,
Jürgen W. Czarske,
Filipe M. Ferreira
Abstract:
A novel MIMO-DSP for space-division multiplexing over multimode fibres is proposed. A principal modes approach is shown to provide two-fold benefits: over 13 times channel memory reduction while minimising the number of optical front-ends needed to detect a subset of the spatial domain.
A novel MIMO-DSP for space-division multiplexing over multimode fibres is proposed. A principal modes approach is shown to provide two-fold benefits: over 13 times channel memory reduction while minimising the number of optical front-ends needed to detect a subset of the spatial domain.
△ Less
Submitted 20 June, 2022;
originally announced June 2022.
-
A note on higher rank descriptions of massless and massive spin-1 particles
Authors:
D. Dalmazi,
F. A. da Silva Barbosa,
A. L. R. dos Santos
Abstract:
The Maxwell theory can be written as a first order model with the help of a two-form auxiliary field, such master action allows the proof of duality between $1$-form and $D-3$ forms. Here we show that the replacement of the two-form auxiliary field by an arbitrary (non symmetric) rank-2 tensor leads to a new massless spin-1 dual theory in terms of a partially antisymmetric rank-3 tensor. In the ma…
▽ More
The Maxwell theory can be written as a first order model with the help of a two-form auxiliary field, such master action allows the proof of duality between $1$-form and $D-3$ forms. Here we show that the replacement of the two-form auxiliary field by an arbitrary (non symmetric) rank-2 tensor leads to a new massless spin-1 dual theory in terms of a partially antisymmetric rank-3 tensor. In the massive spin-1 case we have a non symmetric generalization of the massive two-form theory (Kalb-Ramond). The coupling of the massive non symmetric spin-1 model to matter fields is investigated via master actions.
We also show that massive models with severe discontinuity in their massless limit can also be obtained from Kaluza-Klein dimensional reduction of massless higher rank tensors which become Stueckelberg fields after the reduction.
△ Less
Submitted 12 October, 2022; v1 submitted 15 June, 2022;
originally announced June 2022.
-
Initial performance of the GlueX DIRC detector
Authors:
A. Ali,
F. Barbosa,
J. Bessuille,
E. Chudakov,
R. Dzhygadlo,
C. Fanelli,
J. Frye,
J. Hardin,
A. Hurley,
E. Ihloff,
G. Kalicy,
J. Kelsey,
W. B. Li,
M. Patsyuk,
J. Schwiening,
M. Shepherd,
J. R. Stevens,
T. Whitlatch,
M. Williams,
Y. Yang
Abstract:
The GlueX experiment at Jefferson Laboratory aims to perform quantitative tests of non-perturbative QCD by studying the spectrum of light-quark mesons and baryons. A Detector of Internally Reflected Cherenkov light (DIRC) was installed to enhance the particle identification (PID) capability of the GlueX experiment by providing clean $π$/K separation up to 3.7 GeV/$c$ momentum in the forward region…
▽ More
The GlueX experiment at Jefferson Laboratory aims to perform quantitative tests of non-perturbative QCD by studying the spectrum of light-quark mesons and baryons. A Detector of Internally Reflected Cherenkov light (DIRC) was installed to enhance the particle identification (PID) capability of the GlueX experiment by providing clean $π$/K separation up to 3.7 GeV/$c$ momentum in the forward region ($θ<11^{\circ}$), which will allow the study of hybrid mesons decaying into kaon final states with significantly higher efficiency and purity. The new PID system is constructed with radiators from the decommissioned BaBar DIRC counter, combined with new compact photon cameras based on the SuperB FDIRC concept. The full system was successfully installed and commissioned with beam during 2019/2020. The initial PID performance of the system was evaluated and compared to one from Geant4 simulation.
△ Less
Submitted 23 May, 2022;
originally announced May 2022.
-
Time-optimal control of cranes subject to container height constraints
Authors:
Filipe Marques Barbosa,
Johan Löfberg
Abstract:
The productivity and efficiency of port operations strongly depend on how fast a ship can be unloaded and loaded again. With this in mind, ship-to-shore cranes perform the critical task of transporting containers into and onto a ship and must do so as fast as possible. Though the problem of minimizing the time spent in moving the payload has been addressed in previous studies, the different height…
▽ More
The productivity and efficiency of port operations strongly depend on how fast a ship can be unloaded and loaded again. With this in mind, ship-to-shore cranes perform the critical task of transporting containers into and onto a ship and must do so as fast as possible. Though the problem of minimizing the time spent in moving the payload has been addressed in previous studies, the different heights of the container stacks have not been the focus. In this paper, we perform a change of variable and reformulate the optimization problem to deal with the constraints on the stack heights. As consequence, these constraints become trivial and easy to represent since they turn into bound constraints when the problem is discretized for the numerical solver. To validate the idea, we simulate a small-scale scenario where different stack heights are used. The results confirm our idea and the representation of the stack constraints become indeed trivial. This approach is promising to be applied in real crane operations and has the potential to enhance their automation.
△ Less
Submitted 18 November, 2022; v1 submitted 29 March, 2022;
originally announced March 2022.
-
Canonical analysis of Kalb-Ramond-Proca duality
Authors:
F. A. da Silva Barbosa
Abstract:
It is shown that the canonical quantization of the free massive Kalb-Ramond and Curtright-Freund Lagrangians leads to the same theory obtained from the canonical quantization of the free Proca and Klein-Gordon Lagrangians. The duality in the presence of interaction is explored in the context of the Feynman rules and beyond. It is pointed out that the equivalence between massive dual models without…
▽ More
It is shown that the canonical quantization of the free massive Kalb-Ramond and Curtright-Freund Lagrangians leads to the same theory obtained from the canonical quantization of the free Proca and Klein-Gordon Lagrangians. The duality in the presence of interaction is explored in the context of the Feynman rules and beyond. It is pointed out that the equivalence between massive dual models without gauge symmetry is rooted in an ambiguity of coordinate choices.
△ Less
Submitted 10 June, 2022; v1 submitted 16 March, 2022;
originally announced March 2022.
-
Snowmass 2021 Instrumentation Frontier (IF5 - MPGDs) -- White Paper 2: Micro Pattern Gaseous Detectors for Nuclear Physics
Authors:
Fernando Barbosa,
Daniel Bazin,
Francesco Bossú,
Marco Cortesi,
Silvia Dalla Torre,
Sergey Furletov,
Yulia Furletova,
Paul Gueye,
Kondo Gnanvo,
Marcus Hohlmann,
Wolfgang Mittig,
Damien Neyret,
Matthiew Posik,
Christopher Wrede
Abstract:
Many current and future nuclear physics (NP) experiments across the United States have and are implementing micro-pattern gas detectors (MPGDs) to be used for tracking and PID purposes. MPGDs are capable of operating in high rate environments and providing excellent spatial resolution over a large-area with a low material budget. Summarized in this white paper is the role that MPGDs are playing in…
▽ More
Many current and future nuclear physics (NP) experiments across the United States have and are implementing micro-pattern gas detectors (MPGDs) to be used for tracking and PID purposes. MPGDs are capable of operating in high rate environments and providing excellent spatial resolution over a large-area with a low material budget. Summarized in this white paper is the role that MPGDs are playing in NP experiments and the R&D which is needed to meet the requirements of future NP experiments.
△ Less
Submitted 11 March, 2022;
originally announced March 2022.
-
Atomic memory based on recoil-induced resonances
Authors:
Juan Carlos Chaves Capella,
Alvaro Mitchell Galvao de Melo,
Jesus Pavon Lopez,
Jose Wellington Rocha Tabosa,
Daniel Felinto Pires Barbosa
Abstract:
In this work we perform a detailed theoretical and experimental investigation of an atomic memory based on recoil-induced resonance in cold cesium atoms. We consider the interaction of a nearly degenerated pump and probe beams with an ensemble of two-level atoms. A full theoretical density matrix calculation in the extended Hilbert space of the internal and external atomic degrees of freedom allow…
▽ More
In this work we perform a detailed theoretical and experimental investigation of an atomic memory based on recoil-induced resonance in cold cesium atoms. We consider the interaction of a nearly degenerated pump and probe beams with an ensemble of two-level atoms. A full theoretical density matrix calculation in the extended Hilbert space of the internal and external atomic degrees of freedom allows us to obtain, from first principles, the transient and stationary responses determining the probe transmission and the forward four-wave mixing spectra. These two signals are generated together at the same order of perturbation with respect to the intensities of pump and probe beams. However, during continuous excitation of the sample, they are detected in very different ways and the signal at the probe transmission appears to be considerably larger, being the main focus of investigation prior to this work. Moreover, we have investigated the storage of optical information in the atomic external degrees of freedom, which provided a simple interpretation for the previously-reported non-volatile character of this memory. The retrieved signals after storage reveal the equivalent role of probe transmission and four-wave mixing, as the two signals have similar amplitudes. Probe transmission and forward four-wave-mixing spectra were then experimentally measured for both continuous excitation and after storage. The experimental observations are in good agreement with the developed theory and open a new pathway for the reversible exchange of optical information with atomic systems.
△ Less
Submitted 17 June, 2022; v1 submitted 29 December, 2021;
originally announced December 2021.
-
Search for photoproduction of axion-like particles at GlueX
Authors:
GlueX Collaboration,
S. Adhikari,
C. S. Akondi,
M. Albrecht,
A. Ali,
M. Amaryan,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
E. Chudakov,
S. Cole,
P. L. Cole,
O. Cortes,
V. Crede
, et al. (120 additional authors not shown)
Abstract:
We present a search for axion-like particles, $a$, produced in photon-proton collisions at a center-of-mass energy of approximately 4 GeV, focusing on the scenario where the $a$-gluon coupling is dominant. The search uses $a\toγγ$ and $a\toπ^+π^-π^0$ decays, and a data sample corresponding to an integrated luminosity of 168 pb$^{-1}$ collected with the GlueX detector. The search for $a\toγγ$ decay…
▽ More
We present a search for axion-like particles, $a$, produced in photon-proton collisions at a center-of-mass energy of approximately 4 GeV, focusing on the scenario where the $a$-gluon coupling is dominant. The search uses $a\toγγ$ and $a\toπ^+π^-π^0$ decays, and a data sample corresponding to an integrated luminosity of 168 pb$^{-1}$ collected with the GlueX detector. The search for $a\toγγ$ decays is performed in the mass range of $180 < m_a < 480$ MeV, while the search for $a\toπ^+π^-π^0$ decays explores the $600 < m_a < 720$ MeV region. No evidence for a signal is found, and 90% confidence-level exclusion limits are placed on the $a$-gluon coupling strength. These constraints are the most stringent to date over much of the mass ranges considered.
△ Less
Submitted 24 March, 2022; v1 submitted 27 September, 2021;
originally announced September 2021.
-
Risk-Aware Motion Planning in Partially Known Environments
Authors:
Fernando S. Barbosa,
Bruno Lacerda,
Paul Duckworth,
Jana Tumova,
Nick Hawes
Abstract:
Recent trends envisage robots being deployed in areas deemed dangerous to humans, such as buildings with gas and radiation leaks. In such situations, the model of the underlying hazardous process might be unknown to the agent a priori, giving rise to the problem of planning for safe behaviour in partially known environments. We employ Gaussian process regression to create a probabilistic model of…
▽ More
Recent trends envisage robots being deployed in areas deemed dangerous to humans, such as buildings with gas and radiation leaks. In such situations, the model of the underlying hazardous process might be unknown to the agent a priori, giving rise to the problem of planning for safe behaviour in partially known environments. We employ Gaussian process regression to create a probabilistic model of the hazardous process from local noisy samples. The result of this regression is then used by a risk metric, such as the Conditional Value-at-Risk, to reason about the safety at a certain state. The outcome is a risk function that can be employed in optimal motion planning problems. We demonstrate the use of the proposed function in two approaches. First is a sampling-based motion planning algorithm with an event-based trigger for online replanning. Second is an adaptation to the incremental Gaussian Process motion planner (iGPMP2), allowing it to quickly react and adapt to the environment. Both algorithms are evaluated in representative simulation scenarios, where they demonstrate the ability of avoiding high-risk areas.
△ Less
Submitted 23 September, 2021;
originally announced September 2021.
-
Measurement of Spin Density Matrix Elements in $Λ(1520)$ Photoproduction at 8.2-8.8 GeV
Authors:
GlueX Collaboration,
S. Adhikari,
C. S. Akondi,
M. Albrecht,
A. Ali,
M. Amaryan,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
E. Chudakov,
S. Cole,
P. L. Cole,
O. Cortes,
V. Crede
, et al. (121 additional authors not shown)
Abstract:
We report on the measurement of spin density matrix elements of the $Λ(1520)$ in the photoproduction reaction $γp\rightarrow Λ(1520)K^+$, via its subsequent decay to $K^{-}p$. The measurement was performed as part of the GlueX experimental program in Hall D at Jefferson Lab using a linearly polarized photon beam with $E_γ=$ 8.2-8.8 GeV. These are the first such measurements in this photon energy r…
▽ More
We report on the measurement of spin density matrix elements of the $Λ(1520)$ in the photoproduction reaction $γp\rightarrow Λ(1520)K^+$, via its subsequent decay to $K^{-}p$. The measurement was performed as part of the GlueX experimental program in Hall D at Jefferson Lab using a linearly polarized photon beam with $E_γ=$ 8.2-8.8 GeV. These are the first such measurements in this photon energy range. Results are presented in bins of momentum transfer squared, $-(t-t_\text{0})$. We compare the results with a Reggeon exchange model and determine that natural exchange amplitudes are dominant in $Λ(1520)$ photoproduction.
△ Less
Submitted 3 March, 2022; v1 submitted 26 July, 2021;
originally announced July 2021.
-
Abundance Patterns of $α$ and Neutron-capture Elements in the Helmi Stream
Authors:
Guilherme Limberg,
Rafael M. Santucci,
Silvia Rossi,
Anna B. A. Queiroz,
Cristina Chiappini,
Stefano O. Souza,
Hélio D. Perottoni,
Angeles Pérez-Villegas,
Fabrícia O. Barbosa
Abstract:
We identified 8 additional stars as members of the Helmi stream (HStr) in the combined GALAH+ DR3 and $Gaia$ EDR3 catalog. By consistently reevaluating claimed members from the literature, we consolidate a sample of 22 HStr stars with parameters determined from high-resolution spectroscopy and spanning a considerably wider (by $\sim$0.5 dex) metallicity interval ($-2.5 \lesssim \rm[Fe/H] < -1.0$)…
▽ More
We identified 8 additional stars as members of the Helmi stream (HStr) in the combined GALAH+ DR3 and $Gaia$ EDR3 catalog. By consistently reevaluating claimed members from the literature, we consolidate a sample of 22 HStr stars with parameters determined from high-resolution spectroscopy and spanning a considerably wider (by $\sim$0.5 dex) metallicity interval ($-2.5 \lesssim \rm[Fe/H] < -1.0$) than previously reported. Our study focuses on $α$ (Mg and Ca) and neutron-capture (Ba and Eu) elements. We find that the chemistry of HStr is typical of dwarf spheroidal (dSph) galaxies, in good agreement with previous $N$-body simulations of this merging event. Stars of HStr constitute a clear declining sequence in $\rm[α/Fe]$ for increasing metallicity up to $\rm[Fe/H] \sim -1.0$. Moreover, stars of HStr show a median value of $+$0.5 dex for $\rm[Eu/Fe]$ with a small dispersion ($\pm$0.1 dex). Every star analyzed with $\rm[Fe/H] < -1.2$ belong to the $r$-process enhanced ($\rm[Eu/Fe] > +0.3$ and $\rm[Ba/Eu] < 0.0$) metal-poor category, providing remarkable evidence that, at such low-metallicity regime, stars of HStr experienced enrichment in neutron-capture elements predominantly via $r$-process nucleosynthesis. Finally, the extended metallicity range also suggests an increase in $\rm[Ba/Eu]$ for higher $\rm[Fe/H]$, in conformity with other surviving dwarf satellite galaxies of the Milky Way.
△ Less
Submitted 4 June, 2021; v1 submitted 12 May, 2021;
originally announced May 2021.
-
Science Requirements and Detector Concepts for the Electron-Ion Collider: EIC Yellow Report
Authors:
R. Abdul Khalek,
A. Accardi,
J. Adam,
D. Adamiak,
W. Akers,
M. Albaladejo,
A. Al-bataineh,
M. G. Alexeev,
F. Ameli,
P. Antonioli,
N. Armesto,
W. R. Armstrong,
M. Arratia,
J. Arrington,
A. Asaturyan,
M. Asai,
E. C. Aschenauer,
S. Aune,
H. Avagyan,
C. Ayerbe Gayoso,
B. Azmoun,
A. Bacchetta,
M. D. Baker,
F. Barbosa,
L. Barion
, et al. (390 additional authors not shown)
Abstract:
This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon…
▽ More
This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon and nuclei where their structure is dominated by gluons. Moreover, polarized beams in the EIC will give unprecedented access to the spatial and spin structure of the proton, neutron, and light ions. The studies leading to this document were commissioned and organized by the EIC User Group with the objective of advancing the state and detail of the physics program and developing detector concepts that meet the emerging requirements in preparation for the realization of the EIC. The effort aims to provide the basis for further development of concepts for experimental equipment best suited for the science needs, including the importance of two complementary detectors and interaction regions.
This report consists of three volumes. Volume I is an executive summary of our findings and developed concepts. In Volume II we describe studies of a wide range of physics measurements and the emerging requirements on detector acceptance and performance. Volume III discusses general-purpose detector concepts and the underlying technologies to meet the physics requirements. These considerations will form the basis for a world-class experimental program that aims to increase our understanding of the fundamental structure of all visible matter
△ Less
Submitted 26 October, 2021; v1 submitted 8 March, 2021;
originally announced March 2021.
-
Determining the position of a single spin relative to a metallic nanowire
Authors:
J. F. da Silva Barbosa,
M. Lee,
P. Campagne-Ibarcq,
P. Jamonneau,
Y. Kubo,
S. Pezzagna,
J. Meijer,
T. Teraji,
D. Vion,
D. Esteve,
R. W. Heeres,
P. Bertet
Abstract:
The nanoscale localization of individual paramagnetic defects near an electrical circuit is an important step for realizing hybrid quantum devices with strong spin-microwave photon coupling. Here, we demonstrate the fabrication of an array of individual NV centers in diamond near a metallic nanowire deposited on top of the substrate. We determine the relative position of each NV center with…
▽ More
The nanoscale localization of individual paramagnetic defects near an electrical circuit is an important step for realizing hybrid quantum devices with strong spin-microwave photon coupling. Here, we demonstrate the fabrication of an array of individual NV centers in diamond near a metallic nanowire deposited on top of the substrate. We determine the relative position of each NV center with $\sim$10\,nm accuracy, using it as a vector magnetometer to measure the field generated by passing a dc current through the wire.
△ Less
Submitted 19 November, 2020;
originally announced November 2020.
-
Robust path-following control design of heavy vehicles based on multiobjective evolutionary optimization
Authors:
Gustavo Alves Prudencio de Morais,
Lucas Barbosa Marcos,
Filipe Marques Barbosa,
Bruno Henrique Groenner Barbosa,
Marco Henrique Terra,
Valdir Grassi Jr
Abstract:
The ability to deal with systems parametric uncertainties is an essential issue for heavy self-driving vehicles in unconfined environments. In this sense, robust controllers prove to be efficient for autonomous navigation. However, uncertainty matrices for this class of systems are usually defined by algebraic methods which demand prior knowledge of the system dynamics. In this case, the control s…
▽ More
The ability to deal with systems parametric uncertainties is an essential issue for heavy self-driving vehicles in unconfined environments. In this sense, robust controllers prove to be efficient for autonomous navigation. However, uncertainty matrices for this class of systems are usually defined by algebraic methods which demand prior knowledge of the system dynamics. In this case, the control system designer depends on the quality of the uncertain model to obtain an optimal control performance. This work proposes a robust recursive controller designed via multiobjective optimization to overcome these shortcomings. Furthermore, a local search approach for multiobjective optimization problems is presented. The proposed method applies to any multiobjective evolutionary algorithm already established in the literature. The results presented show that this combination of model-based controller and machine learning improves the effectiveness of the system in terms of robustness, stability and smoothness.
△ Less
Submitted 12 January, 2022; v1 submitted 14 October, 2020;
originally announced October 2020.
-
Measurement of beam asymmetry for $π^-Δ^{++}$ photoproduction on the proton at $E_γ$=8.5 GeV
Authors:
GlueX Collaboration,
S. Adhikari,
C. S. Akondi,
A. Ali,
M. Amaryan,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
B. E. Cannon,
E. Chudakov,
S. Cole,
O. Cortes,
V. Crede,
M. M. Dalton
, et al. (112 additional authors not shown)
Abstract:
We report a measurement of the $π^-$ photoproduction beam asymmetry for the reaction $\vecγ p \rightarrow π^- Δ^{++}$ using data from the GlueX experiment in the photon beam energy range 8.2--8.8 GeV. The asymmetry $Σ$ is measured as a function of four-momentum transfer $t$ to the $Δ^{++}$ and compared to phenomenological models. We find that $Σ$ varies as a function of $t$: negative at smaller va…
▽ More
We report a measurement of the $π^-$ photoproduction beam asymmetry for the reaction $\vecγ p \rightarrow π^- Δ^{++}$ using data from the GlueX experiment in the photon beam energy range 8.2--8.8 GeV. The asymmetry $Σ$ is measured as a function of four-momentum transfer $t$ to the $Δ^{++}$ and compared to phenomenological models. We find that $Σ$ varies as a function of $t$: negative at smaller values and positive at higher values of $|t|$. The reaction can be described theoretically by $t$-channel particle exchange requiring pseudoscalar, vector, and tensor intermediaries. In particular, this reaction requires charge exchange, allowing us to probe pion exchange and the significance of higher-order corrections to one-pion exchange at low momentum transfer. Constraining production mechanisms of conventional mesons may aid in the search for and study of unconventional mesons. This is the first measurement of the process at this energy.
△ Less
Submitted 8 January, 2021; v1 submitted 15 September, 2020;
originally announced September 2020.
-
Provably Safe Control of Lagrangian Systems in Obstacle-Scattered Environments
Authors:
Fernando S. Barbosa,
Lars Lindemann,
Dimos V. Dimarogonas,
Jana Tumova
Abstract:
We propose a hybrid feedback control law that guarantees both safety and asymptotic stability for a class of Lagrangian systems in environments with obstacles. Rather than performing trajectory planning and implementing a trajectory-tracking feedback control law, our approach requires a sequence of locations in the environment (a path plan) and an abstraction of the obstacle-free space. The proble…
▽ More
We propose a hybrid feedback control law that guarantees both safety and asymptotic stability for a class of Lagrangian systems in environments with obstacles. Rather than performing trajectory planning and implementing a trajectory-tracking feedback control law, our approach requires a sequence of locations in the environment (a path plan) and an abstraction of the obstacle-free space. The problem of following a path plan is then interpreted as a sequence of reach-avoid problems: the system is required to consecutively reach each location of the path plan while staying within safe regions. Obstacle-free ellipsoids are used as a way of defining such safe regions, each of which encloses two consecutive locations. Feasible Control Barrier Functions (CBFs) are created directly from geometric constraints, the ellipsoids, ensuring forward-invariance, and therefore safety. Reachability to each location is guaranteed by asymptotically stabilizing Control Lyapunov Functions (CLFs). Both CBFs and CLFs are then encoded into quadratic programs (QPs) without the need of relaxation variables. Furthermore, we also propose a switching mechanism that guarantees the control law is correct and well-defined even when transitioning between QPs. Simulations show the effectiveness of the proposed approach in two complex scenarios.
△ Less
Submitted 4 September, 2020;
originally announced September 2020.
-
The GlueX Beamline and Detector
Authors:
S. Adhikari,
C. S. Akondi,
H. Al Ghoul,
A. Ali,
M. Amaryan,
E. G. Anassontzis,
A. Austregesilo,
F. Barbosa,
J. Barlow,
A. Barnes,
E. Barriga,
R. Barsotti,
T. D. Beattie,
J. Benesch,
V. V. Berdnikov,
G. Biallas,
T. Black,
W. Boeglin,
P. Brindza,
W. J. Briscoe,
T. Britton,
J. Brock,
W. K. Brooks,
B. E. Cannon,
C. Carlin
, et al. (165 additional authors not shown)
Abstract:
The GlueX experiment at Jefferson Lab has been designed to study photoproduction reactions with a 9-GeV linearly polarized photon beam. The energy and arrival time of beam photons are tagged using a scintillator hodoscope and a scintillating fiber array. The photon flux is determined using a pair spectrometer, while the linear polarization of the photon beam is determined using a polarimeter based…
▽ More
The GlueX experiment at Jefferson Lab has been designed to study photoproduction reactions with a 9-GeV linearly polarized photon beam. The energy and arrival time of beam photons are tagged using a scintillator hodoscope and a scintillating fiber array. The photon flux is determined using a pair spectrometer, while the linear polarization of the photon beam is determined using a polarimeter based on triplet photoproduction. Charged-particle tracks from interactions in the central target are analyzed in a solenoidal field using a central straw-tube drift chamber and six packages of planar chambers with cathode strips and drift wires. Electromagnetic showers are reconstructed in a cylindrical scintillating fiber calorimeter inside the magnet and a lead-glass array downstream. Charged particle identification is achieved by measuring energy loss in the wire chambers and using the flight time of particles between the target and detectors outside the magnet. The signals from all detectors are recorded with flash ADCs and/or pipeline TDCs into memories allowing trigger decisions with a latency of 3.3 $μ$s. The detector operates routinely at trigger rates of 40 kHz and data rates of 600 megabytes per second. We describe the photon beam, the GlueX detector components, electronics, data-acquisition and monitoring systems, and the performance of the experiment during the first three years of operation.
△ Less
Submitted 26 October, 2020; v1 submitted 28 May, 2020;
originally announced May 2020.
-
Installation and Commissioning of the GlueX DIRC
Authors:
A. Ali,
F. Barbosa,
J. Bessuille,
E. Chudakov,
R. Dzhygadlo,
C. Fanelli,
J. Frye,
J. Hardin,
A. Hurley,
E. Ihloff,
G. Kalicy,
J. Kelsey,
W. B. Li,
M. Patsyuk,
J. Schwiening,
M. Shepherd,
J. R. Stevens,
T. Whitlatch,
M. Williams,
Y. Yang
Abstract:
The GlueX experiment takes place in experimental Hall D at Jefferson Lab (JLab). With a linearly polarized photon beam of up to 12 GeV energy, GlueX is a dedicated experiment to search for hybrid mesons via photoproduction reactions. The low-intensity (Phase I) of GlueX was recently completed; the high-intensity (Phase II) started in 2020 including an upgraded particle identification system, known…
▽ More
The GlueX experiment takes place in experimental Hall D at Jefferson Lab (JLab). With a linearly polarized photon beam of up to 12 GeV energy, GlueX is a dedicated experiment to search for hybrid mesons via photoproduction reactions. The low-intensity (Phase I) of GlueX was recently completed; the high-intensity (Phase II) started in 2020 including an upgraded particle identification system, known as the DIRC (Detection of Internally Reflected Cherenkov light), utilizing components from the decommissioned BaBar experiment. The identification and separation of the kaon final states will significantly enhance the GlueX physics program, by adding the capability of accessing the strange quark flavor content of conventional (and potentially hybrid) mesons. In these proceedings, we report that the installation and commissioning of the DIRC detector has been successfully completed.
△ Less
Submitted 1 June, 2020; v1 submitted 14 May, 2020;
originally announced May 2020.
-
Measurement of the Photon Beam Asymmetry in $\vecγ p\to K^+Σ^0$ at $E_γ = 8.5$ GeV
Authors:
The GlueX Collaboration,
S. Adhikari,
A. Ali,
M. Amaryan,
A. Austregesilo,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
B. E. Cannon,
N. Cao,
E. Chudakov,
S. Cole,
O. Cortes,
V. Crede,
M. M. Dalton,
T. Daniels,
A. Deur
, et al. (102 additional authors not shown)
Abstract:
We report measurements of the photon beam asymmetry $Σ$ for the reaction $\vecγ p\to K^+Σ^0$(1193) using the GlueX spectrometer in Hall D at Jefferson Lab. Data were collected using a linearly polarized photon beam in the energy range of 8.2-8.8 GeV incident on a liquid hydrogen target. The beam asymmetry $Σ$ was measured as a function of the Mandelstam variable $t$, and a single value of $Σ$ was…
▽ More
We report measurements of the photon beam asymmetry $Σ$ for the reaction $\vecγ p\to K^+Σ^0$(1193) using the GlueX spectrometer in Hall D at Jefferson Lab. Data were collected using a linearly polarized photon beam in the energy range of 8.2-8.8 GeV incident on a liquid hydrogen target. The beam asymmetry $Σ$ was measured as a function of the Mandelstam variable $t$, and a single value of $Σ$ was extracted for events produced in the $u$-channel. These are the first exclusive measurements of the photon beam asymmetry $Σ$ for the reaction in this energy range. For the $t$-channel, the measured beam asymmetry is close to unity over the $t$-range studied, $-t=(0.1-1.4)~$(GeV/$c$)$^{2}$, with an average value of $Σ= 1.00\pm 0.05$. This agrees with theoretical models that describe the reaction via the natural-parity exchange of the $K^{*}$(892) Regge trajectory. A value of $Σ= 0.41 \pm 0.09$ is obtained for the $u$-channel integrated up to $-u=2.0$~(GeV/$c$)$^{2}$.
△ Less
Submitted 12 May, 2020; v1 submitted 18 March, 2020;
originally announced March 2020.
-
The GlueX DIRC Program
Authors:
A. Ali,
F. Barbosa,
J. Bessuille,
E. Chudakov,
R. Dzhygadlo,
C. Fanelli,
J. Frye,
J. Hardin,
A. Hurley,
G. Kalicy,
J. Kelsey,
W. Li,
M. Patsyuk,
C. Schwarz,
J. Schwiening,
M. Shepherd,
J. R. Stevens,
T. Whitlatch,
M. Williams,
Y. Yang
Abstract:
The GlueX experiment is located in experimental Hall D at Jefferson Lab (JLab) and provides a unique capability to search for hybrid mesons in high-energy photoproduction, utilizing a ~9 GeV linearly polarized photon beam. The initial, low-intensity phase of GlueX was recently completed and a high-intensity phase has begun in 2020 which includes an upgraded kaon identification system, known as the…
▽ More
The GlueX experiment is located in experimental Hall D at Jefferson Lab (JLab) and provides a unique capability to search for hybrid mesons in high-energy photoproduction, utilizing a ~9 GeV linearly polarized photon beam. The initial, low-intensity phase of GlueX was recently completed and a high-intensity phase has begun in 2020 which includes an upgraded kaon identification system, known as the DIRC (Detection of Internally Reflected Cherenkov light), utilizing components from the decommissioned BaBar DIRC. The identification of kaon final states will significantly enhance the GlueX physics program, to aid in inferring the quark flavor content of conventional (and potentially hybrid) mesons. In these proceedings we describe the installation of the GlueX DIRC and the analysis of initial commissioning data
△ Less
Submitted 12 March, 2020; v1 submitted 18 February, 2020;
originally announced February 2020.
-
AI-optimized detector design for the future Electron-Ion Collider: the dual-radiator RICH case
Authors:
E. Cisbani,
A. Del Dotto,
C. Fanelli,
M. Williams,
M. Alfred,
F. Barbosa,
L. Barion,
V. Berdnikov,
W. Brooks,
T. Cao,
M. Contalbrigo,
S. Danagoulian,
A. Datta,
M. Demarteau,
A. Denisov,
M. Diefenthaler,
A. Durum,
D. Fields,
Y. Furletova,
C. Gleason,
M. Grosse-Perdekamp,
M. Hattawy,
X. He,
H. van Hecke,
D. Higinbotham
, et al. (22 additional authors not shown)
Abstract:
Advanced detector R&D requires performing computationally intensive and detailed simulations as part of the detector-design optimization process. We propose a general approach to this process based on Bayesian optimization and machine learning that encodes detector requirements. As a case study, we focus on the design of the dual-radiator Ring Imaging Cherenkov (dRICH) detector under development a…
▽ More
Advanced detector R&D requires performing computationally intensive and detailed simulations as part of the detector-design optimization process. We propose a general approach to this process based on Bayesian optimization and machine learning that encodes detector requirements. As a case study, we focus on the design of the dual-radiator Ring Imaging Cherenkov (dRICH) detector under development as part of the particle-identification system at the future Electron-Ion Collider (EIC). The EIC is a US-led frontier accelerator project for nuclear physics, which has been proposed to further explore the structure and interactions of nuclear matter at the scale of sea quarks and gluons. We show that the detector design obtained with our automated and highly parallelized framework outperforms the baseline dRICH design within the assumptions of the current model. Our approach can be applied to any detector R&D, provided that realistic simulations are available.
△ Less
Submitted 6 June, 2020; v1 submitted 13 November, 2019;
originally announced November 2019.
-
The Central Drift Chamber for GlueX
Authors:
N. S. Jarvis,
C. A. Meyer,
B. Zihlmann,
M. Staib,
A. Austregesilo,
F. Barbosa,
C. Dickover,
V. Razmyslovich,
S. Taylor,
Y. Van Haarlem,
G. Visser,
T. Whitlatch
Abstract:
The Central Drift Chamber is a straw-tube wire chamber of cylindrical structure located surrounding the target inside the bore of the GlueX spectrometer solenoid. Its purpose is to detect and track charged particles with momenta as low as 0.25 GeV/c as well as to identify low-momentum protons via energy loss. The construction of the detector is described and its operation and calibration are discu…
▽ More
The Central Drift Chamber is a straw-tube wire chamber of cylindrical structure located surrounding the target inside the bore of the GlueX spectrometer solenoid. Its purpose is to detect and track charged particles with momenta as low as 0.25 GeV/c as well as to identify low-momentum protons via energy loss. The construction of the detector is described and its operation and calibration are discussed in detail. The design goal of 150 microns in position resolution has been reached.
△ Less
Submitted 27 February, 2020; v1 submitted 16 October, 2019;
originally announced October 2019.
-
Beam Asymmetry $\mathbfΣ$ for the Photoproduction of $\mathbfη$ and $\mathbf{η^{\prime}}$ Mesons at $\mathbf{E_γ=8.8}$GeV
Authors:
The GlueX Collaboration,
S. Adhikari,
A. Ali,
M. Amaryan,
A. Austregesilo,
F. Barbosa,
J. Barlow,
A. Barnes,
E. Barriga,
R. Barsotti,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
M. Boer,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
B. E. Cannon,
N. Cao,
E. Chudakov,
S. Cole,
O. Cortes,
V. Crede,
M. M. Dalton
, et al. (109 additional authors not shown)
Abstract:
We report on the measurement of the beam asymmetry $Σ$ for the reactions $\vecγp\rightarrow pη$ and $\vecγp \rightarrow pη^{\prime}$ from the GlueX experiment, using an 8.2--8.8 GeV linearly polarized tagged photon beam incident on a liquid hydrogen target in Hall D at Jefferson Lab. These measurements are made as a function of momentum transfer $-t$, with significantly higher statistical precisio…
▽ More
We report on the measurement of the beam asymmetry $Σ$ for the reactions $\vecγp\rightarrow pη$ and $\vecγp \rightarrow pη^{\prime}$ from the GlueX experiment, using an 8.2--8.8 GeV linearly polarized tagged photon beam incident on a liquid hydrogen target in Hall D at Jefferson Lab. These measurements are made as a function of momentum transfer $-t$, with significantly higher statistical precision than our earlier $η$ measurements, and are the first measurements of $η^{\prime}$ in this energy range. We compare the results to theoretical predictions based on $t$--channel quasi-particle exchange. We also compare the ratio of $Σ_η$ to $Σ_{η^{\prime}}$ to these models, as this ratio is predicted to be sensitive to the amount of $s\bar{s}$ exchange in the production. We find that photoproduction of both $η$ and $η^{\prime}$ is dominated by natural parity exchange with little dependence on $-t$.
△ Less
Submitted 24 November, 2019; v1 submitted 15 August, 2019;
originally announced August 2019.
-
Visible nonlinear photonics via high-order-mode dispersion engineering
Authors:
Yun Zhao,
Xingchen Ji,
Bok Young Kim,
Prathamesh S. Donvalkar,
Jae K. Jang,
Chaitanya Joshi,
Mengjie Yu,
Chaitali Joshi,
Renato R. Domeneguetti,
Felippe A. S. Barbosa,
Paulo Nussenzveig,
Yoshitomo Okawachi,
Michal Lipson,
Alexander L. Gaeta
Abstract:
Over the past decade, remarkable advances have been realized in chip-based nonlinear photonic devices for classical and quantum applications in the near- and mid-infrared regimes. However, few demonstrations have been realized in the visible and near-visible regimes, primarily due to the large normal material group-velocity dispersion (GVD) that makes it challenging to phase match third-order para…
▽ More
Over the past decade, remarkable advances have been realized in chip-based nonlinear photonic devices for classical and quantum applications in the near- and mid-infrared regimes. However, few demonstrations have been realized in the visible and near-visible regimes, primarily due to the large normal material group-velocity dispersion (GVD) that makes it challenging to phase match third-order parametric processes. In this paper, we show that exploiting dispersion engineering of higher-order waveguide modes provides waveguide dispersion that allows for small or anomalous GVD in the visible and near-visible regimes and phase matching of four-wave mixing processes. We illustrate the power of this concept by demonstrating in silicon nitride microresonators a near-visible modelocked Kerr frequency comb and a narrow-band photon-pair source compatible with Rb transitions. These realizations extend applications of nonlinear photonics towards the visible and near-visible regimes for applications in time and frequency metrology, spectral calibration, quantum information, and biomedical applications.
△ Less
Submitted 20 February, 2020; v1 submitted 10 July, 2019;
originally announced July 2019.
-
First measurement of near-threshold J/$ψ$ exclusive photoproduction off the proton
Authors:
The GlueX Collaboration,
A. Ali,
M. Amaryan,
E. G. Anassontzis,
A. Austregesilo,
M. Baalouch,
F. Barbosa,
J. Barlow,
A. Barnes,
E. Barriga,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
M. Boer,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
B. E. Cannon,
N. Cao,
E. Chudakov,
S. Cole,
O. Cortes,
V. Crede,
M. M. Dalton
, et al. (110 additional authors not shown)
Abstract:
We report on the measurement of the $γp \rightarrow J/ψp$ cross section from $E_γ= 11.8$ GeV down to the threshold at $8.2$ GeV using a tagged photon beam with the GlueX experiment. We find the total cross section falls toward the threshold less steeply than expected from two-gluon exchange models. The differential cross section $dσ/dt$ has an exponential slope of $1.67 \pm 0.39$ GeV$^{-2}$ at…
▽ More
We report on the measurement of the $γp \rightarrow J/ψp$ cross section from $E_γ= 11.8$ GeV down to the threshold at $8.2$ GeV using a tagged photon beam with the GlueX experiment. We find the total cross section falls toward the threshold less steeply than expected from two-gluon exchange models. The differential cross section $dσ/dt$ has an exponential slope of $1.67 \pm 0.39$ GeV$^{-2}$ at $10.7$ GeV average energy. The LHCb pentaquark candidates $P_c^+$ can be produced in the $s$-channel of this reaction. We see no evidence for them and set model-dependent upper limits on their branching fractions $\mathcal{B}(P_c^+ \rightarrow J/ψp)$ and cross sections $σ(γp \to P_c^+)\times\mathcal{B}(P_c^+ \to J/ψp) $.
△ Less
Submitted 10 September, 2019; v1 submitted 26 May, 2019;
originally announced May 2019.
-
The GlueX Start Counter Detector
Authors:
Eric Pooser,
Fernando Barbosa,
Werner Boeglin,
Charles Hutton,
Mark Ito,
Mahmoud Kamel,
Puneet Khetarpal,
Anthony Llodra,
Joseph Sandoval,
Simon Taylor,
Timothy Whitlatch,
Stephanie Worthington,
Carlos Yero,
Benedikt Zihlmann
Abstract:
The design, simulation, fabrication, calibration, and performance of the GlueX Start Counter detector is described. The Start Counter was designed to operate at integrated rates of up to 9 MHz with a timing resolution in the range of 500 to 825 ps (FWHM). The Start Counter provides excellent solid angle coverage, a high degree of segmentation for background rejection, and can be utilized in the le…
▽ More
The design, simulation, fabrication, calibration, and performance of the GlueX Start Counter detector is described. The Start Counter was designed to operate at integrated rates of up to 9 MHz with a timing resolution in the range of 500 to 825 ps (FWHM). The Start Counter provides excellent solid angle coverage, a high degree of segmentation for background rejection, and can be utilized in the level 1 trigger for the experiment. It consists of a cylindrical array of 30 thin scintillators with pointed ends that bend towards the beam line at the downstream end. Magnetic field insensitive silicon photomultiplier detectors were used as the light sensors.
△ Less
Submitted 9 January, 2019;
originally announced January 2019.
-
Robust path-following control for articulated heavy-duty vehicles
Authors:
Filipe Marques Barbosa,
Lucas Barbosa Marcos,
Maira Martins da Silva,
Marco Henrique Terra,
Valdir Grassi Jr
Abstract:
Path following and lateral stability are crucial issues for autonomous vehicles. Moreover, these problems increase in complexity when handling articulated heavy-duty vehicles due to their poor manoeuvrability, large sizes and mass variation. In addition, uncertainties on mass may have the potential to significantly decrease the performance of the system, even to the point of destabilising it. Thes…
▽ More
Path following and lateral stability are crucial issues for autonomous vehicles. Moreover, these problems increase in complexity when handling articulated heavy-duty vehicles due to their poor manoeuvrability, large sizes and mass variation. In addition, uncertainties on mass may have the potential to significantly decrease the performance of the system, even to the point of destabilising it. These parametric variations must be taken into account during the design of the controller. However, robust control techniques usually require offline adjustment of auxiliary tuning parameters, which is not practical, leading to sub-optimal operation. Hence, this paper presents an approach to path-following and lateral control for autonomous articulated heavy-duty vehicles subject to parametric uncertainties by using a robust recursive regulator. The main advantage of the proposed controller is that it does not depend on the offline adjustment of tuning parameters. Parametric uncertainties were assumed to be on the payload, and an $\mathcal{H}_{\infty}$ controller was used for performance comparison. The performance of both controllers is evaluated in a double lane-change manoeuvre. Simulation results showed that the proposed method had better performance in terms of robustness, lateral stability, driving smoothness and safety, which demonstrates that it is a very promising control technique for practical applications.
△ Less
Submitted 11 June, 2020; v1 submitted 6 August, 2018;
originally announced August 2018.
-
Interplay of Probabilistic Shaping and the Blind Phase Search Algorithm
Authors:
Darli A. A. Mello,
Fabio A. Barbosa,
Jacklyn D. Reis
Abstract:
Probabilistic shaping (PS) is a promising technique to approach the Shannon limit using typical constellation geometries. However, the impact of PS on the chain of signal processing algorithms of a coherent receiver still needs further investigation. In this work we study the interplay of PS and phase recovery using the blind phase search (BPS) algorithm, which is widely used in optical communicat…
▽ More
Probabilistic shaping (PS) is a promising technique to approach the Shannon limit using typical constellation geometries. However, the impact of PS on the chain of signal processing algorithms of a coherent receiver still needs further investigation. In this work we study the interplay of PS and phase recovery using the blind phase search (BPS) algorithm, which is widely used in optical communications systems. We first investigate a supervised phase search (SPS) algorithm as a theoretical upper bound on the BPS performance, assuming perfect decisions. It is shown that PS influences the SPS algorithm, but its impact can be alleviated by moderate noise rejection window sizes. On the other hand, BPS is affected by PS even for long windows because of correlated erroneous decisions in the phase recovery scheme. The simulation results also show that the capacity-maximizing shaping is near to the BPS worst-case situation for square-QAM constellations, causing potential implementation penalties.
△ Less
Submitted 12 September, 2018; v1 submitted 15 March, 2018;
originally announced March 2018.
-
Construction and Performance of the Barrel Electromagnetic Calorimeter for the GlueX Experiment
Authors:
Tegan Beattie,
Ahmed Foda,
Colleen Henschel,
S Katsaganis,
Shaun Krueger,
George Lolos,
Zisis Papandreou,
E. L. Plummer,
Irina Semenova,
Andrei Semenov,
Fernando Barbosa,
Eugene Chudakov,
Mark Dalton,
David Lawrence,
Yi Qiang,
Nicholas Sandoval,
Elton Smith,
Christopher Stanislav,
Justin Stevens,
Simon Taylor,
Timothy Whitlatch,
Benedikt Zihlmann,
William Levine,
William McGinley,
Curtis Meyer
, et al. (14 additional authors not shown)
Abstract:
The barrel calorimeter is part of the new spectrometer installed in Hall D at Jefferson Lab for the GlueX experiment. The calorimeter was installed in 2013, commissioned in 2014 and has been operating routinely since early 2015. The detector configuration, associated Monte Carlo simulations, calibration and operational performance are described herein. The calorimeter records the time and energy d…
▽ More
The barrel calorimeter is part of the new spectrometer installed in Hall D at Jefferson Lab for the GlueX experiment. The calorimeter was installed in 2013, commissioned in 2014 and has been operating routinely since early 2015. The detector configuration, associated Monte Carlo simulations, calibration and operational performance are described herein. The calorimeter records the time and energy deposited by charged and neutral particles created by a multi-GeV photon beam. It is constructed as a lead and scintillating-fiber calorimeter and read out with 3840 large-area silicon photomultiplier arrays. Particles impinge on the detector over a wide range of angles, from normal incidence at 90 degrees down to 11.5 degrees, which defines a geometry that is fairly unique among calorimeters. The response of the calorimeter has been measured during a running experiment and performs as expected for electromagnetic showers below 2.5 GeV. We characterize the performance of the BCAL using the energy resolution integrated over typical angular distributions for $π^0$ and $η$ production of $σ_E/E$=5.2\%/$\sqrt{E(\rm{GeV})} \oplus$ 3.6\% and a timing resolution of $σ$\,=\,150\,ps at 1\,GeV.
△ Less
Submitted 20 April, 2018; v1 submitted 9 January, 2018;
originally announced January 2018.
-
Hexapartite entanglement in an above-threshold Optical Parametric Oscillator
Authors:
F. A. S. Barbosa,
A. S. Coelho,
L. F. Muñoz Martínez,
L. Ortiz-Gutiérrez,
A. S. Villar,
P. Nussenzveig,
M. Martinelli
Abstract:
We demonstrate, theoretically and experimentally, the generation of hexapartite modal entanglement by the optical parametric oscillator (OPO) operating above the oscillation threshold. We show that the OPO generates a rich structure of entanglement among sets of six optical sideband modes interacting through the non-linear crystal. The class of quantum states thus produced can be controlled by a s…
▽ More
We demonstrate, theoretically and experimentally, the generation of hexapartite modal entanglement by the optical parametric oscillator (OPO) operating above the oscillation threshold. We show that the OPO generates a rich structure of entanglement among sets of six optical sideband modes interacting through the non-linear crystal. The class of quantum states thus produced can be controlled by a single parameter, the power of the external laser that pumps the system. Our platform allows for the generation of massive entanglement among many optical modes with well defined but vastly different frequencies, potentially bridging nodes of a multicolor quantum network.
△ Less
Submitted 28 June, 2018; v1 submitted 5 December, 2017;
originally announced December 2017.
-
Reconstruction of Electrical Impedance Tomography Using Fish School Search, Non-Blind Search, and Genetic Algorithm
Authors:
Valter Augusto de Freitas Barbosa,
Reiga Ramalho Ribeiro,
Allan Rivalles Souza Feitosa,
Victor Luiz Bezerra Araújo da Silva,
Arthur Diego Dias Rocha,
Rafaela Covello de Freitas,
Ricardo Emmanuel de Souza,
Wellington Pinheiro dos Santos
Abstract:
Electrical Impedance Tomography (EIT) is a noninvasive imaging technique that does not use ionizing radiation, with application both in environmental sciences and in health. Image reconstruction is performed by solving an inverse problem and ill-posed. Evolutionary Computation and Swarm Intelligence have become a source of methods for solving inverse problems. Fish School Search (FSS) is a promisi…
▽ More
Electrical Impedance Tomography (EIT) is a noninvasive imaging technique that does not use ionizing radiation, with application both in environmental sciences and in health. Image reconstruction is performed by solving an inverse problem and ill-posed. Evolutionary Computation and Swarm Intelligence have become a source of methods for solving inverse problems. Fish School Search (FSS) is a promising search and optimization method, based on the dynamics of schools of fish. In this article the authors present a method for reconstruction of EIT images based on FSS and Non-Blind Search (NBS). The method was evaluated using numerical phantoms consisting of electrical conductivity images with subjects in the center, between the center and the edge and on the edge of a circular section, with meshes of 415 finite elements. The authors performed 20 simulations for each configuration. Results showed that both FSS and FSS-NBS were able to converge faster than genetic algorithms.
△ Less
Submitted 3 December, 2017;
originally announced December 2017.
-
Exploring six modes of an optical parametric oscillator
Authors:
Luis F. Muñoz-Martínez,
Felippe Alexandre Silva Barbosa,
Antônio Sales Coelho,
Luis Ortiz-Gutiérrez,
Marcelo Martinelli,
Paulo Nussenzveig,
Alessandro S. Villar
Abstract:
We measure the complete quantum state for six modes of the electromagnetic field produced by an optical parametric oscillator. The investigation involves the sideband of the intense pump, signal, and idler fields generated by stimulated parametric downconversion inside a triply resonant optical resonator. We develop a theoretical model to successfully interpret the experimental results. The model…
▽ More
We measure the complete quantum state for six modes of the electromagnetic field produced by an optical parametric oscillator. The investigation involves the sideband of the intense pump, signal, and idler fields generated by stimulated parametric downconversion inside a triply resonant optical resonator. We develop a theoretical model to successfully interpret the experimental results. The model takes into account the coupling of the field modes to the phonon bath of the nonlinear crystal, clearly showing the roles of different physical effects in shaping the structure of the quantum correlations between the six optical modes.
△ Less
Submitted 20 February, 2018; v1 submitted 8 October, 2017;
originally announced October 2017.
-
Inductive-detection electron-spin resonance spectroscopy with $\mathbf{65}\,$spins$/\sqrt{\text{Hz}}$ sensitivity
Authors:
S. Probst,
A. Bienfait,
P. Campagne-Ibarcq,
J. J. Pla,
B. Albanese,
J. F. Da Silva Barbosa,
T. Schenkel,
D. Vion,
D. Esteve,
K. Mølmer,
J. J. L. Morton,
R. Heeres,
P. Bertet
Abstract:
We report electron spin resonance spectroscopy measurements performed at millikelvin temperatures in a custom-built spectrometer comprising a superconducting micro-resonator at $7$ GHz and a Josephson parametric amplifier. Owing to the small ${\sim}10^{-12}λ^3$ magnetic resonator mode volume and to the low noise of the parametric amplifier, the spectrometer sensitivity reaches $260\pm40$ spins$/$e…
▽ More
We report electron spin resonance spectroscopy measurements performed at millikelvin temperatures in a custom-built spectrometer comprising a superconducting micro-resonator at $7$ GHz and a Josephson parametric amplifier. Owing to the small ${\sim}10^{-12}λ^3$ magnetic resonator mode volume and to the low noise of the parametric amplifier, the spectrometer sensitivity reaches $260\pm40$ spins$/$echo and $65\pm10$ $\mathrm{spins}/\sqrt{\text{Hz}}$, respectively.
△ Less
Submitted 30 August, 2017;
originally announced August 2017.
-
On-chip thermo-optic tuning of suspended microresonators
Authors:
Brian S. Lee,
Mian Zhang,
Felippe A. S. Barbosa,
Steven A. Miller,
Aseema Mohanty,
Raphael St-Gelais,
Michal Lipson
Abstract:
Suspended optical microresonators are promising devices for on-chip photonic applications such as radio-frequency oscillators, optical frequency combs, and sensors. Scaling up these devices demand the capability to tune the optical resonances in an integrated manner. Here, we design and experimentally demonstrate integrated on-chip thermo-optic tuning of suspended microresonators by utilizing susp…
▽ More
Suspended optical microresonators are promising devices for on-chip photonic applications such as radio-frequency oscillators, optical frequency combs, and sensors. Scaling up these devices demand the capability to tune the optical resonances in an integrated manner. Here, we design and experimentally demonstrate integrated on-chip thermo-optic tuning of suspended microresonators by utilizing suspended wire bridges and microheaters. We demonstrate the ability to tune the resonance of a suspended microresonator in silicon nitride platform by 9.7 GHz using 5.3 mW of heater power. The loaded optical quality factor (QL ~ 92,000) stays constant throughout the detuning. We demonstrate the efficacy of our approach by completely turning on and off the optical coupling between two evanescently coupled suspended microresonators.
△ Less
Submitted 27 March, 2017;
originally announced March 2017.
-
Design and construction of a high-energy photon polarimeter
Authors:
M. Dugger,
B. G. Ritchie,
N. Sparks,
K. Moriya,
R. J. Tucker,
R. J. Lee,
B. N. Thorpe,
T. Hodges,
F. J. Barbosa,
N. Sandoval,
R. T. Jones
Abstract:
We report on the design and construction of a high-energy photon polarimeter for measuring the degree of polarization of a linearly-polarized photon beam. The photon polarimeter uses the process of pair production on an atomic electron (triplet production). The azimuthal distribution of scattered atomic electrons following triplet production yields information regarding the degree of linear polari…
▽ More
We report on the design and construction of a high-energy photon polarimeter for measuring the degree of polarization of a linearly-polarized photon beam. The photon polarimeter uses the process of pair production on an atomic electron (triplet production). The azimuthal distribution of scattered atomic electrons following triplet production yields information regarding the degree of linear polarization of the incident photon beam. The polarimeter, operated in conjunction with a pair spectrometer, uses a silicon strip detector to measure the recoil electron distribution resulting from triplet photoproduction in a beryllium target foil. The analyzing power $Σ_A$ for the device using a 75 $\rm{μm}$ beryllium converter foil is about 0.2, with a relative systematic uncertainty in $Σ_A$ of 1.5%.
△ Less
Submitted 22 March, 2017;
originally announced March 2017.
-
Measurement of the beam asymmetry $Σ$ for $π^0$ and $η$ photoproduction on the proton at $E_γ= 9$ GeV
Authors:
GlueX Collaboration,
H. Al Ghoul,
E. G. Anassontzis,
A. Austregesilo,
F. Barbosa,
A. Barnes,
T. D. Beattie,
D. W. Bennett,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. J. Briscoe,
W. K. Brooks,
B. E. Cannon,
O. Chernyshov,
E. Chudakov,
V. Crede,
M. M. Dalton,
A. Deur,
S. Dobbs,
A. Dolgolenko,
M. Dugger,
R. Dzhygadlo,
H. Egiyan,
P. Eugenio
, et al. (101 additional authors not shown)
Abstract:
We report measurements of the photon beam asymmetry $Σ$ for the reactions $\vecγp\to pπ^0$ and $\vecγp\to pη$ from the GlueX experiment using a 9 GeV linearly-polarized, tagged photon beam incident on a liquid hydrogen target in Jefferson Lab's Hall D. The asymmetries, measured as a function of the proton momentum transfer, possess greater precision than previous $π^0$ measurements and are the fir…
▽ More
We report measurements of the photon beam asymmetry $Σ$ for the reactions $\vecγp\to pπ^0$ and $\vecγp\to pη$ from the GlueX experiment using a 9 GeV linearly-polarized, tagged photon beam incident on a liquid hydrogen target in Jefferson Lab's Hall D. The asymmetries, measured as a function of the proton momentum transfer, possess greater precision than previous $π^0$ measurements and are the first $η$ measurements in this energy regime. The results are compared with theoretical predictions based on $t$-channel, quasi-particle exchange and constrain the axial-vector component of the neutral meson production mechanism in these models.
△ Less
Submitted 15 May, 2017; v1 submitted 27 January, 2017;
originally announced January 2017.