-
Attention network forecasts time-to-failure in laboratory shear experiments
Authors:
Hope Jasperson,
David C. Bolton,
Paul Johnson,
Robert Guyer,
Chris Marone,
Maarten V. de Hoop
Abstract:
Rocks under stress deform by creep mechanisms that include formation and slip on small-scale internal cracks. Intragranular cracks and slip along grain contacts release energy as elastic waves termed acoustic emissions (AE). AEs are thought to contain predictive information that can be used for fault failure forecasting. Here we present a method using unsupervised classification and an attention n…
▽ More
Rocks under stress deform by creep mechanisms that include formation and slip on small-scale internal cracks. Intragranular cracks and slip along grain contacts release energy as elastic waves termed acoustic emissions (AE). AEs are thought to contain predictive information that can be used for fault failure forecasting. Here we present a method using unsupervised classification and an attention network to forecast labquakes using AE waveform features. Our data were generated in a laboratory setting using a biaxial shearing device with granular fault gouge intended to mimic the conditions of tectonic faults. Here we analyzed the temporal evolution of AEs generated throughout several hundred laboratory earthquake cycles. We used a Conscience Self-Organizing Map (CSOM) to perform topologically ordered vector quantization based on waveform properties. The resulting map was used to interactively cluster AEs. We examined the clusters over time to identify those with predictive ability. Finally, we used a variety of LSTM and attention-based networks to test the predictive power of the AE clusters. By tracking cumulative waveform features over the seismic cycle, the network is able to forecast the time-to-failure (TTF) of lab earthquakes. Our results show that analyzing the data to isolate predictive signals and using a more sophisticated network architecture are key to robustly forecasting labquakes. In the future, this method could be applied on tectonic faults monitor earthquakes and augment current early warning systems.
△ Less
Submitted 20 September, 2021; v1 submitted 12 December, 2019;
originally announced December 2019.
-
Earthquake catalog-based machine learning identification of laboratory fault states and the effects of magnitude of completeness
Authors:
Nicholas Lubbers,
David C. Bolton,
Jamaludin Mohd-Yusof,
Chris Marone,
Kipton Barros,
Paul A. Johnson
Abstract:
Machine learning regression can predict macroscopic fault properties such as shear stress, friction, and time to failure using continuous records of fault zone acoustic emissions. Here we show that a similar approach is successful using event catalogs derived from the continuous data. Our methods are applicable to catalogs of arbitrary scale and magnitude of completeness. We investigate how machin…
▽ More
Machine learning regression can predict macroscopic fault properties such as shear stress, friction, and time to failure using continuous records of fault zone acoustic emissions. Here we show that a similar approach is successful using event catalogs derived from the continuous data. Our methods are applicable to catalogs of arbitrary scale and magnitude of completeness. We investigate how machine learning regression from an event catalog of laboratory earthquakes performs as a function of the catalog magnitude of completeness. We find that strong model performance requires a sufficiently low magnitude of completeness, and below this magnitude of completeness model performance saturates.
△ Less
Submitted 26 October, 2018;
originally announced October 2018.
-
Estimating the Physical State of a Laboratory Slow Slipping Fault from Seismic Signals
Authors:
Claudia Hulbert,
Bertrand Rouet-Leduc,
Christopher X. Ren,
Jacques Riviere,
David C. Bolton,
Chris Marone,
Paul A. Johnson
Abstract:
Over the last two decades, strain and GPS measurements have shown that slow slip on earthquake faults is a widespread phenomenon. Slow slip is also inferred from correlated small amplitude seismic signals known as nonvolcanic tremor and low frequency earthquakes (LFEs). Slow slip has been reproduced in laboratory and simulation studies, however the fundamental physics of these phenomena and their…
▽ More
Over the last two decades, strain and GPS measurements have shown that slow slip on earthquake faults is a widespread phenomenon. Slow slip is also inferred from correlated small amplitude seismic signals known as nonvolcanic tremor and low frequency earthquakes (LFEs). Slow slip has been reproduced in laboratory and simulation studies, however the fundamental physics of these phenomena and their relationship to dynamic earthquake rupture remains poorly understood. Here we show that, in a laboratory setting, continuous seismic waves are imprinted with fundamental signatures of the fault's physical state. Using machine learning on continuous seismic waves, we can infer several bulk characteristics of the fault (friction, shear displacement, gouge thickness), at any time during the slow slip cycle. This analysis also allows us to infer many properties of the future behavior of the fault, including the time remaining before the next slow slip event. Our work suggests that by applying machine learning approaches to continuous seismic data, new insight into the physics of slow slip could be obtained in Earth.
△ Less
Submitted 23 January, 2018;
originally announced January 2018.
-
Estimating Fault Friction from Seismic Signals in the Laboratory
Authors:
Bertrand Rouet-Leduc,
Claudia Hulbert,
David C. Bolton,
Christopher X. Ren,
Jacques Riviere,
Chris Marone,
Robert A. Guyer,
Paul A. Johnson
Abstract:
Nearly all aspects of earthquake rupture are controlled by the friction along the fault that progressively increases with tectonic forcing, but in general cannot be directly measured. We show that fault friction can be determined at any time, from the continuous seismic signal. In a classic laboratory experiment of repeating earthquakes, we find that the seismic signal follows a specific pattern w…
▽ More
Nearly all aspects of earthquake rupture are controlled by the friction along the fault that progressively increases with tectonic forcing, but in general cannot be directly measured. We show that fault friction can be determined at any time, from the continuous seismic signal. In a classic laboratory experiment of repeating earthquakes, we find that the seismic signal follows a specific pattern with respect to fault friction, allowing us to determine the fault's position within its failure cycle. Using machine learning, we show that instantaneous statistical characteristics of the seismic signal are a fingerprint of the fault zone shear stress and frictional state. Further analysis of this fingerprint leads to a simple equation of state quantitatively relating the seismic signal power and the friction on the fault. These results show that fault zone frictional characteristics and the state of stress in the surroundings of the fault can be inferred from seismic waves, at least in the laboratory.
△ Less
Submitted 18 January, 2018; v1 submitted 11 October, 2017;
originally announced October 2017.
-
Cascaded Region-based Densely Connected Network for Event Detection: A Seismic Application
Authors:
Yue Wu,
Youzuo Lin,
Zheng Zhou,
David Chas Bolton,
Ji Liu,
Paul Johnson
Abstract:
Automatic event detection from time series signals has wide applications, such as abnormal event detection in video surveillance and event detection in geophysical data. Traditional detection methods detect events primarily by the use of similarity and correlation in data. Those methods can be inefficient and yield low accuracy. In recent years, because of the significantly increased computational…
▽ More
Automatic event detection from time series signals has wide applications, such as abnormal event detection in video surveillance and event detection in geophysical data. Traditional detection methods detect events primarily by the use of similarity and correlation in data. Those methods can be inefficient and yield low accuracy. In recent years, because of the significantly increased computational power, machine learning techniques have revolutionized many science and engineering domains. In this study, we apply a deep-learning-based method to the detection of events from time series seismic signals. However, a direct adaptation of the similar ideas from 2D object detection to our problem faces two challenges. The first challenge is that the duration of earthquake event varies significantly; The other is that the proposals generated are temporally correlated. To address these challenges, we propose a novel cascaded region-based convolutional neural network to capture earthquake events in different sizes, while incorporating contextual information to enrich features for each individual proposal. To achieve a better generalization performance, we use densely connected blocks as the backbone of our network. Because of the fact that some positive events are not correctly annotated, we further formulate the detection problem as a learning-from-noise problem. To verify the performance of our detection methods, we employ our methods to seismic data generated from a bi-axial "earthquake machine" located at Rock Mechanics Laboratory, and we acquire labels with the help of experts. Through our numerical tests, we show that our novel detection techniques yield high accuracy. Therefore, our novel deep-learning-based detection methods can potentially be powerful tools for locating events from time series data in various applications.
△ Less
Submitted 28 November, 2017; v1 submitted 12 September, 2017;
originally announced September 2017.