Showing 1–48 of 48 results for author: Bourgeois, O

Thermal conductivity reduction due to phonon geometrical scattering in nano-engineered epitaxial germanium

Authors: Jessy Paterson, Sunanda Mitra, Yanqing Liu, Mustapha Boukhari, Dhruv Singhal, David Lacroix, Emmanuel Hadji, André Barski, Dimitri Tainoff, Olivier Bourgeois

Abstract: Nano-engineering crystalline materials can be used to tailor their thermal properties. By adding new nanoscale phonon scattering centers and controlling their size, one can effectively decrease the phonon mean free path and hence the thermal conductivity of a fully crystalline material. In this letter, we use the 3$ωおめが$ method in the temperature range of 100-300 K to experimentally report on the mor… ▽ More Nano-engineering crystalline materials can be used to tailor their thermal properties. By adding new nanoscale phonon scattering centers and controlling their size, one can effectively decrease the phonon mean free path and hence the thermal conductivity of a fully crystalline material. In this letter, we use the 3$ωおめが$ method in the temperature range of 100-300 K to experimentally report on the more than threefold reduction of the thermal conductivity of an epitaxially-grown crystalline germanium thin film with embedded polydispersed crystalline \ch{Ge3Mn5} nano-inclusions with diameters ranging from 5 to 25~nm. A detailed analysis of the structure of the thin film coupled with Monte Carlo simulations of phonon transport highlight the role of the nano-inclusions volume fraction in the reduction of the phononic contribution to the thermal conductivity, in particular its temperature dependence, leading to a phonon mean free path that is set by geometrical constraints. △ Less

Submitted 30 April, 2024; originally announced April 2024.

Comments: Applied Physics Letters, In press

Experimental set-up for thermal measurements at the nanoscale using an SThM probe with niobium nitride thermometer

Authors: R. Swami, G. Julie, S. Le-Denmat, G. Pernot, D. Singhal, J. Paterson, J. Maire, J. F. Motte, N. Paillet, H. Guillou, S. Gomes, O. Bourgeois

Abstract: Scanning Thermal Microscopy (SThM) has become an important measurement tool for characterizing the thermal properties of materials at the nanometer scale. This technique requires a SThM probe that combines an Atomic Force Microscopy (AFM) probe and a very sensitive resistive thermometry; the thermometer being located at the apex of the probe tip allows the mapping of temperature or thermal propert… ▽ More Scanning Thermal Microscopy (SThM) has become an important measurement tool for characterizing the thermal properties of materials at the nanometer scale. This technique requires a SThM probe that combines an Atomic Force Microscopy (AFM) probe and a very sensitive resistive thermometry; the thermometer being located at the apex of the probe tip allows the mapping of temperature or thermal properties of nanostructured materials with very high spatial resolution. The high interest of the SThM technique in the field of thermal nanoscience currently suffers from a low temperature sensitivity despite its high spatial resolution. To address this challenge, we developed a high vacuum-based AFM system hosting a highly sensitive niobium nitride (NbN) SThM probe to demonstrate its unique performance. As a proof of concept, we utilized this custom-built system to carry out thermal measurements using the 3$ωおめが$ method. By measuring the $V_{3ωおめが}$ voltage on the NbN resistive thermometer in vacuum conditions we were able to determine the SThM probe's thermal conductance and thermal time constant. The performance of the probe is demonstrated by doing thermal measurements in-contact with a sapphire sample. △ Less

Submitted 30 April, 2024; v1 submitted 8 March, 2024; originally announced March 2024.

Comments: 17 pages, 13 figures

On the link between mechanics and thermal properties: mechanothermics

Authors: Eddy Collin, Ilya Golokolenov, Olivier Maillet, Laurent Saminadayar, Olivier Bourgeois

Abstract: We report on the theoretical derivation of macroscopic thermal properties (specific heat, thermal conductivity) of an electrically insulating rod connected to two reservoirs, from the linear superposition of its mechanical mode Brownian motions. The calculation is performed for a weak thermal gradient, in the classical limit (high temperature). The development is kept basic as far as geometry and… ▽ More We report on the theoretical derivation of macroscopic thermal properties (specific heat, thermal conductivity) of an electrically insulating rod connected to two reservoirs, from the linear superposition of its mechanical mode Brownian motions. The calculation is performed for a weak thermal gradient, in the classical limit (high temperature). The development is kept basic as far as geometry and experimental conditions are concerned, enabling an almost fully analytic treatment. In the modeling, each of the modes is subject to a specific Langevin force, which enables to produce the required temperature profile along the rod. The theory is predictive: the temperature gradient (and therefore energy transport) is linked to motion amplitude cross-correlations between nearby mechanical modes. This arises because energy transport is actually mediated by mixing between the modal waves, and not by the modes themselves. This result can be tested on experiments, and shall extend the concepts underlying equipartition and fluctuation-dissipation theorems. The theory links intimately the macroscopic size of the clamping region where the mixing occurs to the microscopic lengthscale of the problem at hand: the phonon mean-free-path. This clamping region, which is key, has received recently a renewed attention in the field of nanomechanics with topical works on "phonon shields" and "soft clamping". We believe that our work should impact the domain of thermal transport in nanostructures, with future developments of the theory toward the quantum regime. △ Less

Submitted 11 April, 2023; v1 submitted 28 November, 2022; originally announced November 2022.

Journal ref: New J. of Physics Vol. 25, 043008 (2023)

Specific Heat of Thin Phonon Cavities at Low Temperature: Very High Values Revealed by ZeptoJoule Calorimetry

Authors: Adib Tavakoli, Kunal J. Lulla, Tuomas Puurtinen, Ilari Maasilta, Eddy Collin, Laurent Saminadayar, Olivier Bourgeois

Abstract: Specific heat of phonon cavities is investigated in order to analyse the effect of phonon confinement on thermodynamic properties. The specific heat of free standing very thin SiN membranes in the low dimensional limit is measured down to very low temperatures (from 6~K to 50~mK). In the whole temperature range, we measured an excess of specific heat orders of magnitude bigger than the typical val… ▽ More Specific heat of phonon cavities is investigated in order to analyse the effect of phonon confinement on thermodynamic properties. The specific heat of free standing very thin SiN membranes in the low dimensional limit is measured down to very low temperatures (from 6~K to 50~mK). In the whole temperature range, we measured an excess of specific heat orders of magnitude bigger than the typical value observed in amorphous solids. Below 1~K, a cross-over in $c_p$ to a lower power law is seen, and the value of specific heat of thinner membranes becomes larger than that of thicker ones demonstrating a significant contribution coming from the surface. We show that this high value of the specific heat cannot be explained by the sole contribution of 2D phonon modes (Lamb waves). The excess specific heat, being thickness dependent, could come from tunneling two level systems (TLS) that form in low density regions of amorphous solids located on the surfaces. We also show that the specific heat is strongly tuned by the internal stress of the membrane by orders of magnitude, giving unprecedentedly high values, making low stress SiN very efficient for energy storage at very low temperature. △ Less

Submitted 15 June, 2022; originally announced June 2022.

Inducing micromechanical motion by optical excitation of a single quantum dot

Authors: Jan Kettler, Nitika Vaish, Laure Mercier de Lépinay, Benjamin Besga, Pierre-Louis de Assis, Olivier Bourgeois, Alexia Auffèves, Maxime Richard, Julien Claudon, Jean-Michel Gérard, Benjamin Pigeau, Olivier Arcizet, Pierre Verlot, Jean-Philippe Poizat

Abstract: Hybrid quantum optomechanical systems offer an interface between a single two-level system and a macroscopical mechanical degree of freedom. In this work, we build a hybrid system made of a vibrating microwire coupled to a single semiconductor quantum dot (QD) via material strain. It was shown a few years ago, that the QD excitonic transition energy can thus be modulated by the microwire motion. W… ▽ More Hybrid quantum optomechanical systems offer an interface between a single two-level system and a macroscopical mechanical degree of freedom. In this work, we build a hybrid system made of a vibrating microwire coupled to a single semiconductor quantum dot (QD) via material strain. It was shown a few years ago, that the QD excitonic transition energy can thus be modulated by the microwire motion. We demonstrate here the reverse effect, whereby the wire is set in motion by the resonant drive of a single QD exciton with a laser modulated at the mechanical frequency. The resulting driving force is found to be almost 3 orders of magnitude larger than radiation pressure. From a fundamental aspect, this state dependent force offers a convenient strategy to map the QD quantum state onto a mechanical degree of freedom. △ Less

Submitted 10 May, 2021; originally announced May 2021.

Comments: 16 pages, 12 figures

Journal ref: Nat. Nanotechnol. 16, 283 (2021)

A macroscopic object passively cooled into its quantum ground state of motion: beyond single-mode cooling

Authors: D. Cattiaux, I. Golokolenov, S. Kumar, M. Sillanpää, L. Mercier de Lépinay, R. R. Gazizulin, X. Zhou, A. D. Armour, O. Bourgeois, A. Fefferman, E. Collin

Abstract: The building blocks of Nature, namely atoms and elementary particles, are described by quantum mechanics. This fundamental theory is the ground on which physicists have built their major mathematical models [1]. Today, the unique features of quantum objects have led to the advent of promising quantum technologies [2, 3]. However, the macroscopic world is manifestly classical, and the nature of the… ▽ More The building blocks of Nature, namely atoms and elementary particles, are described by quantum mechanics. This fundamental theory is the ground on which physicists have built their major mathematical models [1]. Today, the unique features of quantum objects have led to the advent of promising quantum technologies [2, 3]. However, the macroscopic world is manifestly classical, and the nature of the quantum-to-classical crossover remains one of the most challenging open question of Science to date. In this respect, moving objects play a specific role [4, 5]. Pioneering experiments over the last few years have begun exploring quantum behaviour of micron-sized mechanical systems,either by passively cooling single GHz modes, or by adapting laser cooling techniques developed in atomic physics to cool specific modes far below the temperature of their surroundings [6-11]. Here instead we describe a very different approach, passive cooling of a micromechanical system down to 500 microK, reducing the average number of quanta in the fundamental vibrational mode at 15 MHz to just 0.3 (with even lower values expected for higher harmonics); the challenge being to be still able to detect the motion without disturbing the system noticeably. With such an approach higher harmonics and the surrounding environment are also cooled, leading to potentially much longer mechanical coherence times, and enabling experiments questioning mechanical wave-function collapse [12], potentially from the gravitational background [13, 14], and quantum thermodynamics [15]. Beyond the average behaviour, here we also report on the fluctuations of the fundamental vibrational mode of the device in-equilibrium with the cryostat. These reveal a surprisingly complex interplay with the local environment and allow characteristics of two distinct thermodynamic baths to be probed. △ Less

Submitted 26 October, 2021; v1 submitted 19 April, 2021; originally announced April 2021.

Comments: With S.I

Journal ref: Nature Comm. Vol. 12, 6182 (2021)

Nanomechanical damping via electron-assisted relaxation of two-level systems

Authors: Olivier Maillet, Dylan Cattiaux, Xin Zhou, Rasul R. Gazizulin, Olivier Bourgeois, Andrew D. Fefferman, Eddy Collin

Abstract: We report on measurements of dissipation and frequency noise at millikelvin temperatures of nanomechanical devices covered with aluminum. A clear excess damping is observed after switching the metallic layer from superconducting to the normal state with a magnetic field. Beyond the standard model of internal tunneling systems coupled to the phonon bath, here we consider the relaxation to the condu… ▽ More We report on measurements of dissipation and frequency noise at millikelvin temperatures of nanomechanical devices covered with aluminum. A clear excess damping is observed after switching the metallic layer from superconducting to the normal state with a magnetic field. Beyond the standard model of internal tunneling systems coupled to the phonon bath, here we consider the relaxation to the conduction electrons together with the nature of the mechanical dispersion laws for stressed/unstressed devices. With these key ingredients, a model describing the relaxation of two-level systems inside the structure due to interactions with electrons and phonons with well separated timescales captures the data. In addition, we measure an excess 1/f-type frequency noise in the normal state, which further emphasizes the impact of conduction electrons. △ Less

Submitted 22 February, 2023; v1 submitted 8 September, 2020; originally announced September 2020.

Comments: 7 pages (main text) + 9 pages (SI), same as published version

Journal ref: Phys. Rev. B 107, 064104 (2023)

Specific Heat Signature of the Berezinskii-Kosterlitz-Thouless Transition in Ultrathin Superconducting Films

Authors: T. D. Nguyen, A. Frydman, O. Bourgeois

Abstract: The Berezinskii-Kosterlitz-Thouless (BKT) transition is expected to have a clear signature on the specific heat. The singularity at the transition temperature $T_{BKT}$ is predicted to be immeasurable, and a broad non-universal peak is expected at $T>T_{BKT}$. Up to date this has not been observed in two-dimensional superconductors. We use a unique highly sensitive technique to measure the specifi… ▽ More The Berezinskii-Kosterlitz-Thouless (BKT) transition is expected to have a clear signature on the specific heat. The singularity at the transition temperature $T_{BKT}$ is predicted to be immeasurable, and a broad non-universal peak is expected at $T>T_{BKT}$. Up to date this has not been observed in two-dimensional superconductors. We use a unique highly sensitive technique to measure the specific heat of ultrathin Pb films. We find that thick films exhibit a specific heat jump at $T_C$ that is consistent with BCS theory. As the film thickness is reduced below the superconducting coherence length and the systems enters the 2D limit the specific heat reveals BKT-like behavior. We discuss these observations in the framework of the continuous BCS-BKT crossover as a function of film thickness. △ Less

Submitted 2 August, 2019; originally announced August 2019.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. B 101, 014509 (2020)

Niobium nitride thin films for very low temperature resistive thermometry

Authors: Tuyen Nguyen, Adib Tavakoli, Sebastien Triqueneaux, Rahul Swami, Aki Ruhtinas, Jeremy Gradel, Pablo Garcia-Campos, Klaus Hasselbach, Aviad Frydman, Benjamin Piot, Mathieu Gibert, Eddy Collin, Olivier Bourgeois

Abstract: We investigate thin film resistive thermometry based on metal-to-insulator-transition (niobium nitride) materials down to very low temperature. The variation of the NbN thermometer resistance have been calibrated versus temperature and magnetic field. High sensitivity in tempertaure variation detection is demonstrated through efficient temperature coefficient of resistance. The nitrogen content of… ▽ More We investigate thin film resistive thermometry based on metal-to-insulator-transition (niobium nitride) materials down to very low temperature. The variation of the NbN thermometer resistance have been calibrated versus temperature and magnetic field. High sensitivity in tempertaure variation detection is demonstrated through efficient temperature coefficient of resistance. The nitrogen content of the niobium nitride thin films can be tuned to adjust the optimal working temperature range. In the present experiment, we show the versatility of the NbN thin film technology through applications in very different low temperature use-cases. We demonstrate that thin film resistive thermometry can be extended to temperatures below 30 mK with low electrical impedance. △ Less

Submitted 19 July, 2019; originally announced July 2019.

Comments: Article accepted for publication in JLTP

On-chip thermometry for microwave optomechanics implemented in a nuclear demagnetization cryostat

Authors: X. Zhou, D. Cattiaux, R. R. Gazizulin, A. Luck, O. Maillet, T. Crozes, J-F. Motte, O. Bourgeois, A. Fefferman, E. Collin

Abstract: We report on microwave optomechanics measurements performed on a nuclear adiabatic demagnetization cryostat, whose temperature is determined by accurate thermometry from below 500$~μみゅー$K to about 1$~$Kelvin. We describe a method for accessing the on-chip temperature, building on the blue-detuned parametric instability and a standard microwave setup. The capabilities and sensitivity of both the exper… ▽ More We report on microwave optomechanics measurements performed on a nuclear adiabatic demagnetization cryostat, whose temperature is determined by accurate thermometry from below 500$~μみゅー$K to about 1$~$Kelvin. We describe a method for accessing the on-chip temperature, building on the blue-detuned parametric instability and a standard microwave setup. The capabilities and sensitivity of both the experimental arrangement and the developed technique are demonstrated with a very weakly coupled silicon-nitride doubly-clamped beam mode of about 4$~$MHz and a niobium on-chip cavity resonating around 6$~$GHz. We report on an unstable intrinsic driving force in the coupled microwave-mechanical system acting on the mechanics that appears below typically 100$~$mK. The origin of this phenomenon remains unknown, and deserves theoretical input. It prevents us from performing reliable experiments below typically 10-30$~$mK; however no evidence of thermal decoupling is observed, and we propose that the same features should be present in all devices sharing the microwave technology, at different levels of strengths. We further demonstrate empirically how most of the unstable feature can be annihilated, and speculate how the mechanism could be linked to atomic-scale two level systems. The described microwave/microkelvin facility is part of the EMP platform, and shall be used for further experiments within and below the millikelvin range. △ Less

Submitted 20 April, 2022; v1 submitted 12 March, 2019; originally announced March 2019.

Comments: 14 pages with appendix; plus Erratum 17, 049901 (2022)

Journal ref: Phys. Rev. Applied 12, 044066 (2019)

Measurement of anisotropic thermal conductivity of a dense forest of nanowires using the 3$ωおめが$ method

Authors: Dhruv Singhal, Jessy Paterson, Dimitri Tainoff, Jacques Richard, Meriam Ben-Khedim, Pascal Gentile, Laurent Cagnon, Daniel Bourgault, Denis Buttard, Olivier Bourgeois

Abstract: The 3$ωおめが$ method is a dynamic measurement technique developed for determining the thermal conductivity of thin films or semi-infinite bulk materials. A simplified model is often applied to deduce the thermal conductivity from the slope of the real part of the ac temperature amplitude as a function of the logarithm of frequency, which in-turn brings a limitation on the kind of samples under observat… ▽ More The 3$ωおめが$ method is a dynamic measurement technique developed for determining the thermal conductivity of thin films or semi-infinite bulk materials. A simplified model is often applied to deduce the thermal conductivity from the slope of the real part of the ac temperature amplitude as a function of the logarithm of frequency, which in-turn brings a limitation on the kind of samples under observation. In this work, we have measured the thermal conductivity of a forest of nanowires embedded in nanoporous alumina membranes using the 3$ωおめが$ method. An analytical solution of 2D heat conduction is then used to model the multilayer system, considering the anisotropic thermal properties of the different layers, substrate thermal conductivity and their thicknesses. Data treatment is performed by fitting the experimental results with the 2D model on two different sets of nanowires (silicon and BiSbTe) embedded in the matrix of nanoporous alumina template, having thermal conductivities that differ by at least one order of magnitude. These experimental results show that this method extends the applicability of the 3$ωおめが$ technique to more complex systems having anisotropic thermal properties. △ Less

Submitted 21 November, 2018; originally announced November 2018.

Journal ref: REVIEW OF SCIENTIFIC INSTRUMENTS 79, 2018

Network of thermoelectric nanogenerators for low power energy harvesting

Authors: Dimitri Tainoff, Anaïs Proudhom, Céline Tur, Thierry Crozes, Sébastien Dufresnes, Sylvain Dumont, Daniel Bourgault, Olivier Bourgeois

Abstract: We report the design, elaboration and measurements of an innovative planar thermoelectric (TE) devices made of a large array of small mechanically suspended nanogenerators (nanoTEG). The miniaturized TE generators based on SiN membranes are arranged in series and/or in parallel depending on the expected final resistance adapted to the one of the load. The microstructuration allows, at the same tim… ▽ More We report the design, elaboration and measurements of an innovative planar thermoelectric (TE) devices made of a large array of small mechanically suspended nanogenerators (nanoTEG). The miniaturized TE generators based on SiN membranes are arranged in series and/or in parallel depending on the expected final resistance adapted to the one of the load. The microstructuration allows, at the same time, a high thermal insulation of the membrane from the silicon frame and high thermal coupling to its environment (surrounding air, radiations). We show a ratio of 60% between the measured effective temperature of the membrane, (and hence of the TE junctions), and the available temperature of the heat source (air). The thermal gradient generated across the TE junction reaches a value as high as 60 kelvin per mm. Energy harvesting with this planar TE module is demonstrated through the collected voltage on the TE junctions when a temperature gradient is applied, showing a harvested power on the order of 0.3 $μみゅー$Watt for a 1 cm 2 chip for an effective temperature gradient of 10 K. The optimization of nanoTEGs performances will increase the power harvested significantly and permit to send a signal by a regular communication protocol and feed basic functions like temperature measurement or airflow sensing. △ Less

Submitted 21 November, 2018; originally announced November 2018.

Measuring frequency fluctuations in nonlinear nanomechanical resonators

Authors: Olivier Maillet, Xin Zhou, Rasul R. Gazizulin, Bojan R. Ilic, Jeevak M. Parpia, Olivier Bourgeois, Andrew D. Fefferman, Eddy Collin

Abstract: Advances in nanomechanics within recent years have demonstrated an always expanding range of devices, from top-down structures to appealing bottom-up MoS$_2$ and graphene membranes, used for both sensing and component-oriented applications. One of the main concerns in all of these devices is frequency noise, which ultimately limits their applicability. This issue has attracted a lot of attention r… ▽ More Advances in nanomechanics within recent years have demonstrated an always expanding range of devices, from top-down structures to appealing bottom-up MoS$_2$ and graphene membranes, used for both sensing and component-oriented applications. One of the main concerns in all of these devices is frequency noise, which ultimately limits their applicability. This issue has attracted a lot of attention recently, and the origin of this noise remains elusive up to date. In this Letter we present a very simple technique to measure frequency noise in nonlinear mechanical devices, based on the presence of bistability. It is illustrated on silicon-nitride high-stress doubly-clamped beams, in a cryogenic environment. We report on the same $T/f$ dependence of the frequency noise power spectra as reported in the literature. But we also find unexpected {\it damping fluctuations}, amplified in the vicinity of the bifurcation points; this effect is clearly distinct from already reported nonlinear dephasing, and poses a fundamental limit on the measurement of bifurcation frequencies. The technique is further applied to the measurement of frequency noise as a function of mode number, within the same device. The relative frequency noise for the fundamental flexure $δでるたf/f_0$ lies in the range $0.5 - 0.01~$ppm (consistent with literature for cryogenic MHz devices), and decreases with mode number in the range studied. The technique can be applied to {\it any types} of nano-mechanical structures, enabling progresses towards the understanding of intrinsic sources of noise in these devices. △ Less

Submitted 8 June, 2018; v1 submitted 20 February, 2018; originally announced February 2018.

Comments: Published 7 may 2018

Journal ref: ACS Nano 2018

Surface-induced near-field scaling in the Knudsen layer of a rarefied gas

Authors: R. R. Gazizulin, O. Maillet, X. Zhou, A. Maldonado Cid, O. Bourgeois, E. Collin

Abstract: We report on experiments performed within the Knudsen boundary layer of a low-pressure gas. The non-invasive probe we use is a suspended nano-electro-mechanical string (NEMS), which interacts with $^4$He gas at cryogenic temperatures. When the pressure $P$ is decreased, a reduction of the damping force below molecular friction $\propto P$ had been first reported in Phys. Rev. Lett. Vol 113, 136101… ▽ More We report on experiments performed within the Knudsen boundary layer of a low-pressure gas. The non-invasive probe we use is a suspended nano-electro-mechanical string (NEMS), which interacts with $^4$He gas at cryogenic temperatures. When the pressure $P$ is decreased, a reduction of the damping force below molecular friction $\propto P$ had been first reported in Phys. Rev. Lett. Vol 113, 136101 (2014) and never reproduced since. We demonstrate that this effect is independent of geometry, but dependent on temperature. Within the framework of kinetic theory, this reduction is interpreted as a rarefaction phenomenon, carried through the boundary layer by a deviation from the usual Maxwell-Boltzmann equilibrium distribution induced by surface scattering. Adsorbed atoms are shown to play a key role in the process, which explains why room temperature data fail to reproduce it. △ Less

Submitted 20 January, 2018; v1 submitted 10 August, 2017; originally announced August 2017.

Comments: Article plus supplementary material

Journal ref: Phys. Rev. Lett. 120, 036802 (2018)

Non-linear Frequency Transduction of Nano-mechanical Brownian Motion

Authors: Olivier Maillet, Xin Zhou, Rasul Gazizulin, Ana Maldonado Cid, Martial Defoort, Olivier Bourgeois, Eddy Collin

Abstract: We report on experiments addressing the non-linear interaction between a nano-mechanical mode and position fluctuations. The Duffing non-linearity transduces the Brownian motion of the mode, and of other non-linearly coupled ones, into frequency noise. This mechanism, ubiquitous to all weakly-nonlinear resonators thermalized to a bath, results in a phase diffusion process altering the motion: two… ▽ More We report on experiments addressing the non-linear interaction between a nano-mechanical mode and position fluctuations. The Duffing non-linearity transduces the Brownian motion of the mode, and of other non-linearly coupled ones, into frequency noise. This mechanism, ubiquitous to all weakly-nonlinear resonators thermalized to a bath, results in a phase diffusion process altering the motion: two limit behaviors appear, analogous to motional narrowing and inhomogeneous broadening in NMR. Their crossover is found to depend non-trivially on the ratio of the frequency noise correlation time to its magnitude. Our measurements obtained over an unprecedented range covering the two limits match the theory of Y. Zhang and M. I. Dykman, Phys. Rev. B 92, 165419 (2015), with no free parameters. We finally discuss the fundamental bound on frequency resolution set by this mechanism, which is not marginal for bottom-up nanostructures. △ Less

Submitted 20 October, 2017; v1 submitted 20 April, 2017; originally announced April 2017.

Comments: Article plus Supplementary Material

Journal ref: Phys. Rev. B 96, 165434 (2017)

The Universality of Thermal Transport in Amorphous Nanowires at Low Temperatures

Authors: Adib Tavakoli, Christophe Blanc, Hossein Ftouni, Kunal Lulla, Andrew Fefferman, Eddy Collin, Olivier Bourgeois

Abstract: Thermal transport properties of amorphous materials at low temperatures are governed by the interaction between phonons and localized excitations referred to as tunneling two level systems (TLS). The temperature variation of the thermal conductivity of these amorphous materials is considered as universal and is characterized by a quadratic power law. This is well described by the phenomenological… ▽ More Thermal transport properties of amorphous materials at low temperatures are governed by the interaction between phonons and localized excitations referred to as tunneling two level systems (TLS). The temperature variation of the thermal conductivity of these amorphous materials is considered as universal and is characterized by a quadratic power law. This is well described by the phenomenological TLS model even though its microscopic explanation is still elusive. Here, by scaling down to the nanometer scale amorphous systems much below the bulk phonon-TLS mean free path, we probed the robustness of that model in restricted geometry systems. Using very sensitive thermal conductance measurements, we demonstrate that the temperature dependence of the thermal conductance of silicon nitride nanostructures remains mostly quadratic independently of the nanowire section. It is not following the cubic power law in temperature as expected in a Casimir-Ziman regime of boundary limited thermal transport. This shows a thermal transport counter intuitively dominated by phonon-TLS interactions and not by phonon-boundary scattering in the nanowires. This could be ascribed to an unexpected high density of TLS on the surfaces which still dominates the phonon diffusion processes at low temperatures and explains why the universal quadratic temperature dependence of thermal conductance still holds for amorphous nanowires. △ Less

Submitted 24 March, 2017; originally announced March 2017.

Quantum criticality at the superconductor to insulator transition revealed by specific heat measurements

Authors: Shachaf Poran, Tuyen Nguyen-Duc, Assa Auerbach, Nicolas Dupuis, Aviad Frydman, Olivier Bourgeois

Abstract: The superconductor-insulator transition (SIT) is considered an excellent example of a quantum phase transition which is driven by quantum fluctuations at zero temperature. The quantum critical point is characterized by a diverging correlation length and a vanishing energy scale. Low energy fluctuations near quantum criticality may be experimentally detected by specific heat, $c_{\rm p}$, measureme… ▽ More The superconductor-insulator transition (SIT) is considered an excellent example of a quantum phase transition which is driven by quantum fluctuations at zero temperature. The quantum critical point is characterized by a diverging correlation length and a vanishing energy scale. Low energy fluctuations near quantum criticality may be experimentally detected by specific heat, $c_{\rm p}$, measurements. Here, we use a unique highly sensitive experiment to measure $c_{\rm p}$ of two-dimensional granular Pb films through the SIT. The specific heat shows the usual jump at the mean field superconducting transition temperature $T_{\rm c}^{\rm {mf}}$ marking the onset of Cooper pairs formation. As the film thickness is tuned toward the SIT, $T_{\rm c}^{\rm {mf}}$ is relatively unchanged, while the magnitude of the jump and low temperature specific heat increase significantly. This behaviour is taken as the thermodynamic fingerprint of quantum criticality in the vicinity of a quantum phase transition. △ Less

Submitted 23 March, 2017; originally announced March 2017.

Comments: 9 pages, 5 figures, 1 table

Journal ref: Nature Communications, 8, 14464, (2017)

Reduction of phonon mean free path: from low temperature physics to room temperature applications in thermoelectricity

Authors: Olivier Bourgeois, Dimitri Tainoff, Adib Tavakoli, Yanqing Liu, Christophe Blanc, Mustapha Boukhari, André Barski, Emmanuel Hadji

Abstract: It has been proposed for a long time now that the reduction of the thermal conductivity by reducing the phonon mean free path is one of the best way to improve the current performance of thermoelectrics. By measuring the thermal conductance and thermal conductivity of nanowires and thin films, we show different ways of increasing the phonon scattering from low temperature up to room temperature ex… ▽ More It has been proposed for a long time now that the reduction of the thermal conductivity by reducing the phonon mean free path is one of the best way to improve the current performance of thermoelectrics. By measuring the thermal conductance and thermal conductivity of nanowires and thin films, we show different ways of increasing the phonon scattering from low temperature up to room temperature experiments. It is shown that playing with the geometry (constriction, periodic structures, nano-inclusions), from the ballistic to the diffusive limit, the phonon thermal transport can be severely altered in single crystalline semiconducting structures; the phonon mean free path being in consequence reduced. The diverse implications on thermoelectric properties will be eventually discussed. △ Less

Submitted 14 December, 2016; originally announced December 2016.

Journal ref: Comptes Rendus Physique, Elsevier Masson, 2016, Thermoelectric mesoscopic phenomena / Ph{é}nom{è}nes thermo{é}lectriques m{é}soscopiques, 17, pp.1154

Slippage and boundary layer probed in an almost-ideal gas by a nano-mechanical oscillator

Authors: M. Defoort, K. J. Lulla, T. Crozes, O. Maillet, O. Bourgeois, E. Collin

Abstract: We have measured the interaction between $^4$He gas at 4.2$~$K and a high-quality nano-electro-mechanical string device for its first 3 symmetric modes (resonating at 2.2$~$MHz, 6.7$~$MHz and 11$~$MHz with quality factor $Q > 0.1$ million) over almost 6 orders of magnitude in pressure. This fluid can be viewed as the best experimental implementation of an almost-ideal monoatomic and inert gas whic… ▽ More We have measured the interaction between $^4$He gas at 4.2$~$K and a high-quality nano-electro-mechanical string device for its first 3 symmetric modes (resonating at 2.2$~$MHz, 6.7$~$MHz and 11$~$MHz with quality factor $Q > 0.1$ million) over almost 6 orders of magnitude in pressure. This fluid can be viewed as the best experimental implementation of an almost-ideal monoatomic and inert gas which properties are tabulated. The experiment ranges from high pressure where the flow is of laminar Stokes-type presenting slippage, down to very low pressures where the flow is molecular. In the molecular regime, when the mean-free-path is of the order of the distance between the suspended nano-mechanical probe and the bottom of the trench we resolve for the first time the signature of the boundary (Knudsen) layer onto the measured dissipation. Our results are discussed in the framework of the most recent theories investigating boundary effects in fluids (both analytic approaches and Monte-Carlo DSMC simulations). △ Less

Submitted 8 December, 2015; originally announced December 2015.

Comments: Editor's suggestion

Journal ref: Phys. Rev. Lett. Vol. 113, 136101 (2014)

Evidence for the role of normal-state electrons in nanoelectromechanical damping mechanisms at very low temperatures

Authors: K. J. Lulla, M. Defoort, C. Blanc, O. Bourgeois, E. Collin

Abstract: We report on experiments performed at low temperatures on aluminum covered silicon nanoelectromechanical resonators. The substantial difference observed between the mechanical dissipation in the normal and superconducting states measured within the same device unambiguously demonstrates the importance of normal-state electrons in the damping mechanism. The dissipative component becomes vanishingly… ▽ More We report on experiments performed at low temperatures on aluminum covered silicon nanoelectromechanical resonators. The substantial difference observed between the mechanical dissipation in the normal and superconducting states measured within the same device unambiguously demonstrates the importance of normal-state electrons in the damping mechanism. The dissipative component becomes vanishingly small at very low temperatures in the superconducting state, leading to exceptional values for the quality factor of such small silicon structures. A critical discussion is given within the framework of the standard tunneling model. △ Less

Submitted 3 December, 2015; originally announced December 2015.

Comments: SI not provided

Journal ref: Phys. Rev. Lett. Vol. 110, 177206 (2013)

Specific heat measurement of thin suspended SiN membrane from 8 K to 300 K using the 3$ωおめが$-V$\ddot{o}$lklein method

Authors: Hossein Ftouni, Dimitri Tainoff, Jacques Richard, Kunal Lulla, Jean Guidi, Eddy Collin, Olivier Bourgeois

Abstract: We present a specific heat measurement technique adapted to thin or very thin suspended membranes from low temperature (8 K) to 300 K. The presented device allows the measurement of the heat capacity of a 70 ng silicon nitride membrane (50 or 100 nm thick), corresponding to a heat capacity of 1.4x10$^{-10}$ J/K at 8 K and 5.1x10$^{-8}$ J/K at 300 K. Measurements are performed using the 3$ωおめが$ method… ▽ More We present a specific heat measurement technique adapted to thin or very thin suspended membranes from low temperature (8 K) to 300 K. The presented device allows the measurement of the heat capacity of a 70 ng silicon nitride membrane (50 or 100 nm thick), corresponding to a heat capacity of 1.4x10$^{-10}$ J/K at 8 K and 5.1x10$^{-8}$ J/K at 300 K. Measurements are performed using the 3$ωおめが$ method coupled to the V$\ddot{o}$lklein geometry. This configuration allows the measurement of both specific heat and thermal conductivity within the same experiment. A transducer (heater/thermometer) is used to create an oscillation of the heat flux on the membrane; the voltage oscillation appearing at the third harmonic which contains the thermal information is measured using a Wheatstone bridge set-up. The heat capacity measurement is performed by measuring the variation of the 3$ωおめが$ voltage over a wide frequency range and by fitting the experimental data using a thermal model adapted to the heat transfer across the membrane. The experimental data are compared to a regular Debye model; the specific heat exhibits features commonly seen for glasses at low temperature. △ Less

Submitted 24 November, 2015; originally announced November 2015.

Journal ref: Rev. Sci. Instrum. Vol. 84, 094902 (2013)

In-situ comprehensive calibration of a tri-port nano-electro-mechanical device

Authors: E. Collin, M. Defoort, K. Lulla, T. Moutonet, J. -S. Heron, O. Bourgeois, Yu. M. Bunkov, H. Godfrin

Abstract: We report on experiments performed in vacuum and at cryogenic temperatures on a tri-port nano-electro-mechanical (NEMS) device. One port is a very non-linear capacitive actuation, while the two others implement the magnetomotive scheme with a linear input force port and a (quasi-linear) output velocity port. We present an experimental method enabling a full characterization of the nanomechanical d… ▽ More We report on experiments performed in vacuum and at cryogenic temperatures on a tri-port nano-electro-mechanical (NEMS) device. One port is a very non-linear capacitive actuation, while the two others implement the magnetomotive scheme with a linear input force port and a (quasi-linear) output velocity port. We present an experimental method enabling a full characterization of the nanomechanical device harmonic response: the non-linear capacitance function $C(x)$ is derived, and the normal parameters $k$ and $m$ (spring constant and mass) of the mode under study are measured through a careful definition of the motion (in meters) and of the applied forces (in Newtons). These results are obtained with a series of purely electric measurements performed without disconnecting/reconnecting the device, and rely only on known DC properties of the circuit, making use of a thermometric property of the oscillator itself: we use the Young modulus of the coating metal as a thermometer, and the resistivity for Joule heating. The setup requires only three connecting lines without any particular matching, enabling the preservation of a high impedance NEMS environment even at MHz frequencies. The experimental data are fit to a detailed electrical and thermal model of the NEMS device, demonstrating a complete understanding of its dynamics. These methods are quite general and can be adapted (as a whole, or in parts) to a large variety of elecromechanical devices. △ Less

Submitted 23 November, 2015; originally announced November 2015.

Journal ref: Rev. Sci. Instrum. Vol. 83, 045005 (2012)

Nonlinear parametric amplification in a tri-port nanoelectromechanical device

Authors: E. Collin, T. Moutonet, J. -S. Heron, O. Bourgeois, Yu. M. Bunkov, H. Godfrin

Abstract: We report on measurements performed at low temperatures on a nanoelectromechanical system (NEMS) under (capacitive) parametric pumping. The excitations and detection schemes are purely electrical, and enable in the present experiment the straightforward measurement of forces down to about a femtonewton, for displacements of an Angström, using standard room temperature electronics. We demonstrate t… ▽ More We report on measurements performed at low temperatures on a nanoelectromechanical system (NEMS) under (capacitive) parametric pumping. The excitations and detection schemes are purely electrical, and enable in the present experiment the straightforward measurement of forces down to about a femtonewton, for displacements of an Angström, using standard room temperature electronics. We demonstrate that a small (linear) force applied on the device can be amplified up to more than a 100 times, while the system is {\it truly moving}. We explore the dynamics up to about 50$~$nm deflections for cantilevers about 200$~$nm thick by 3$~$$μみゅー$m long oscillating at a frequency of 7$~$MHz. We present a generic modeling of nonlinear parametric amplification, and give analytic theoretical solutions enabling the fit of experimental results. We finally discuss the practical limits of the technique, with a particular application: the measurement of {\it anelastic damping} in the metallic coating of the device with an exceptional resolution of about 0.5$~$\%. △ Less

Submitted 23 November, 2015; originally announced November 2015.

Journal ref: Phys. Rev. B 84, 054108 (2011)

Modal "self-coupling" as a sensitive probe for nanomechanical detection

Authors: M. Defoort, K. J. Lulla, C. Blanc, O. Bourgeois, A. D. Armour, E. Collin

Abstract: We present a high-sensitivity measurement technique for mechanical nanoresonators. Due to intrinsic nonlinear effects, different flexural modes of a nanobeam can be coupled while driving each of them on resonance. This mode-coupling scheme is dispersive and one mode resonance shifts with respect to the motional amplitude of the other. The same idea can be implemented on a {\it single} mode, exciti… ▽ More We present a high-sensitivity measurement technique for mechanical nanoresonators. Due to intrinsic nonlinear effects, different flexural modes of a nanobeam can be coupled while driving each of them on resonance. This mode-coupling scheme is dispersive and one mode resonance shifts with respect to the motional amplitude of the other. The same idea can be implemented on a {\it single} mode, exciting it with two slightly detuned signals. This two-tone scheme is used here to measure the resonance lineshape of one mode through a frequency shift in the response of the device. The method acts as an amplitude-to-frequency transduction which ultimately suffers only from phase noise of the local oscillator used and of the nanomechanical device itself. We also present a theory which reproduces the data without free parameters. △ Less

Submitted 23 November, 2015; originally announced November 2015.

Journal ref: Appl. Phys. Lett. Vol. 103, 013104 (2013)

Classical decoherence in a nanomechanical resonator

Authors: Olivier Maillet, Frantisek Vavrek, Andrew D. Fefferman, Olivier Bourgeois, Eddy Collin

Abstract: Decoherence is an essential mechanism that defines the boundary between classical and quantum behaviours, while imposing technological bounds for quantum devices. Little is known about quantum coherence of mechanical systems, as opposed to electromagnetic degrees of freedom. But decoherence can also be thought of in a purely classical context, as the loss of phase coherence in the classical phase… ▽ More Decoherence is an essential mechanism that defines the boundary between classical and quantum behaviours, while imposing technological bounds for quantum devices. Little is known about quantum coherence of mechanical systems, as opposed to electromagnetic degrees of freedom. But decoherence can also be thought of in a purely classical context, as the loss of phase coherence in the classical phase space. Indeed the bridge between quantum and classical physics is under intense investigation, using in particular classical nanomechanical analogues of quantum phenomena. In the present work, by separating pure dephasing from dissipation, we quantitatively model the classical decoherence of a mechanical resonator: through the experimental control of frequency fluctuations, we engineer artificial dephasing. Building on the fruitful analogy introduced between spins/quantum bits and nanomechanical modes, we report on the methods available to define pure dephasing in these systems, while demonstrating the intrinsic almost-ideal properties of silicon-nitride beams. These experimental and theoretical results, at the boundary between classical nanomechanics and quantum information fields, are prerequisite in the understanding of decoherence processes in mechanical devices, both classical and quantum. △ Less

Submitted 25 October, 2017; v1 submitted 6 November, 2015; originally announced November 2015.

Comments: SI not provided

Journal ref: New J. Phys. 18, 073022 (2016)

The thermal conductivity of silicon nitride membranes is not sensitive to stress

Authors: Hossein Ftouni, Christophe Blanc, Dimitri Tainoff, Andrew D. Fefferman, Martial Defoort, Kunal J. Lulla, Jacques Richard, Eddy Collin, Olivier Bourgeois

Abstract: We have measured the thermal properties of suspended membranes from 10 K to 300 K for two amplitudes of internal stress (about 0.1 GPa and 1 GPa) and for two different thicknesses (50 nm and 100 nm). The use of the original 3 ωおめが-Volklein method has allowed the extraction of both the specific heat and the thermal conductivity of each SiN membrane over a wide temperature range. The mechanical propert… ▽ More We have measured the thermal properties of suspended membranes from 10 K to 300 K for two amplitudes of internal stress (about 0.1 GPa and 1 GPa) and for two different thicknesses (50 nm and 100 nm). The use of the original 3 ωおめが-Volklein method has allowed the extraction of both the specific heat and the thermal conductivity of each SiN membrane over a wide temperature range. The mechanical properties of the same substrates have been measured at helium temperatures using nanomechanical techniques. Our measurements show that the thermal transport in freestanding SiN membranes is not affected by the presence of internal stress. Consistently, mechanical dissipation is also unaffected even though Qs increase with increasing tensile stress. We thus demonstrate that the theory developed by Wu and Yu [Phys. Rev. B 84, 174109 (2011)] does not apply to this amorphous material in this stress range. On the other hand, our results can be viewed as a natural consequence of the "dissipation dilution" argument [Y. L. Huang and P. R. Saulson, Rev. Sci. Instrum. 69, 544 (1998)] which has been introduced in the context of mechanical damping. △ Less

Submitted 5 June, 2015; originally announced June 2015.

Comments: 15 pages, 6 figures. Submitted to PRB

Journal ref: Phys. Rev. B 92, 125439 (2015)

Dissolution on Titan and on Earth: Towards the age of Titan's karstic landscapes

Authors: Thomas Cornet, Daniel Cordier, Tangui Le Bahers, Olivier Bourgeois, Cyril Fleurant, Stéphane Le Mouélic, Nicolas Altobelli

Abstract: Titan's polar surface is dotted with hundreds of lacustrine depressions. Based on the hypothesis that they are karstic in origin, we aim at determining the efficiency of surface dissolution as a landshaping process on Titan, in a comparative planetology perspective with the Earth as reference. Our approach is based on the calculation of solutional denudation rates and allow inference of formation… ▽ More Titan's polar surface is dotted with hundreds of lacustrine depressions. Based on the hypothesis that they are karstic in origin, we aim at determining the efficiency of surface dissolution as a landshaping process on Titan, in a comparative planetology perspective with the Earth as reference. Our approach is based on the calculation of solutional denudation rates and allow inference of formation timescales for topographic depressions developed by chemical erosion on both planetary bodies. The model depends on the solubility of solids in liquids, the density of solids and liquids, and the average annual net rainfall rates. We compute and compare the denudation rates of pure solid organics in liquid hydrocarbons and of minerals in liquid water over Titan and Earth timescales. We then investigate the denudation rates of a superficial organic layer in liquid methane over one Titan year. At this timescale, such a layer on Titan would behave like salts or carbonates on Earth depending on its composition, which means that dissolution processes would likely occur but would be 30 times slower on Titan compared to the Earth due to the seasonality of precipitation. Assuming an average depth of 100 m for Titan's lacustrine depressions, these could have developed in a few tens of millions of years at polar latitudes higher than 70° N and S, and a few hundreds of million years at lower polar latitudes. The ages determined are consistent with the youth of the surface (<1 Gyr) and the repartition of dissolution-related landforms on Titan. △ Less

Submitted 29 May, 2015; originally announced May 2015.

Comments: To appear in Journal of Geophysical Research Planets, 2015

Scaling laws for the bifurcation-escape rate in a nanomechanical resonator

Authors: Martial Defoort, Vadim Puller, Olivier Bourgeois, Fabio Pistolesi, Eddy Collin

Abstract: We report on experimental and theoretical studies of the fluctuation-induced escape time from a metastable state of a nanomechanical Duffing resonator in cryogenic environment. By tuning in situ the non-linear coefficient $γがんま$ we could explore a wide range of the parameter space around the bifurcation point, where the metastable state becomes unstable. We measured in a relaxation process the distri… ▽ More We report on experimental and theoretical studies of the fluctuation-induced escape time from a metastable state of a nanomechanical Duffing resonator in cryogenic environment. By tuning in situ the non-linear coefficient $γがんま$ we could explore a wide range of the parameter space around the bifurcation point, where the metastable state becomes unstable. We measured in a relaxation process the distribution of the escape times. We have been able to verify its exponential distribution and extract the escape rate $Γがんま$. We investigated the scaling of $Γがんま$ with respect to the distance to the bifurcation point and $γがんま$, finding an unprecedented quantitative agreement with the theoretical description of the stochastic problem. Simple power scaling laws turn out to hold in a large region of the parameter's space, as anticipated by recent theoretical predictions. These unique findings, implemented in a model dynamical system, are relevant to all systems experiencing under-damped saddle-node bifurcation. △ Less

Submitted 23 November, 2015; v1 submitted 24 September, 2014; originally announced September 2014.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. E 92, 050903 (2015)

Modal Decomposition in Goalpost Micro/nano Electro-mechanical Devices

Authors: Eddy Collin, Martial Defoort, Kunal Lulla, Christophe Blanc, Jean Guidi, Sebastien Dufresnes, Olivier Bourgeois, Henri Godfrin

Abstract: We have studied the first three symmetric out-of-plane flexural resonance modes of a goalpost silicon micro-mechanical device. Measurements have been performed at 4.2K in vacuum, demonstrating high Qs and good linear properties. Numerical simulations have been realized to fit the resonance frequencies and produce the mode shapes. These mode shapes are complex, since they involve distortions of two… ▽ More We have studied the first three symmetric out-of-plane flexural resonance modes of a goalpost silicon micro-mechanical device. Measurements have been performed at 4.2K in vacuum, demonstrating high Qs and good linear properties. Numerical simulations have been realized to fit the resonance frequencies and produce the mode shapes. These mode shapes are complex, since they involve distortions of two coupled orthogonal bars. Nonetheless, analytic expressions have been developed to reproduce these numerical results, with no free parameters. Owing to their generality they are extremely helpful, in particular to identify the parameters which may limit the performances of the device. The overall agreement is very good, and has been verified on our nano-mechanical version of the device. △ Less

Submitted 12 December, 2013; originally announced December 2013.

Comments: Journal of Low Temperature Physics (2013)

Phonon Heat Conduction in Corrugated Silicon Nanowires Below the Casimir Limit

Authors: Christophe Blanc, Ali Rajabpour, Sebastian Volz, Thierry Fournier, Olivier Bourgeois

Abstract: The thermal conductance of straight and corrugated monocrystalline silicon nanowires has been measured between 0.3 K and 5 K. The difference in the thermal transport between corrugated nanowires and straight ones demonstrates a strong reduction in the mean free path of the phonons. This averaged mean free path is remarkably smaller than the smaller diameter of the nanowire, evidencing a phonon the… ▽ More The thermal conductance of straight and corrugated monocrystalline silicon nanowires has been measured between 0.3 K and 5 K. The difference in the thermal transport between corrugated nanowires and straight ones demonstrates a strong reduction in the mean free path of the phonons. This averaged mean free path is remarkably smaller than the smaller diameter of the nanowire, evidencing a phonon thermal transport reduced below the Casimir limit. Monte Carlo simulations highlight that this effect can be attributed to significant multiple scattering of ballistic phonons occuring on the corrugated surfaces. This result suggests an original approach to transforming a monocrystalline material into a phonon glass. △ Less

Submitted 17 April, 2013; v1 submitted 18 February, 2013; originally announced February 2013.

Journal ref: Applied Physics Letters 103, 4 (2013) 043109

Searching for thermal signatures of persistent currents in normal metal rings

Authors: Germain Souche, Julien Huillery, H. Pothier, Philippe Gandit, Jerome I. Mars, Sergey Skipetrov, Olivier Bourgeois

Abstract: We introduce a calorimetric approach to probe persistent currents in normal metal rings. The heat capacity of a large ensemble of silver rings is measured by nanocalorimetry under a varying magnetic field at different temperatures (60 mK, 100 mK and 150 mK). Periodic oscillations versus magnetic field are detected in the phase signal of the temperature oscillations, though not in the amplitude (bo… ▽ More We introduce a calorimetric approach to probe persistent currents in normal metal rings. The heat capacity of a large ensemble of silver rings is measured by nanocalorimetry under a varying magnetic field at different temperatures (60 mK, 100 mK and 150 mK). Periodic oscillations versus magnetic field are detected in the phase signal of the temperature oscillations, though not in the amplitude (both of them directly linked to the heat capacity). The period of these oscillations ($Φふぁい_0/2$, with $Φふぁい_0 = h/e$ the magnetic flux quantum) and their evolution with temperature are in agreement with theoretical predictions. In contrast, the amplitude of the corresponding heat capacity oscillations (several $k_{\mathrm{B}}$) is two orders of magnitude larger than predicted by theory. △ Less

Submitted 18 March, 2013; v1 submitted 18 January, 2013; originally announced January 2013.

Journal ref: Physical Review B (Condensed Matter) 87 (2013) 115120

Thermoelectric propertie of Ge based electron crystal phonon glass materials

Authors: Dimitri Tainoff, André Barski, Eric Prestat, Daniel Bourgault, Emmanuell Hadji, Yanqing Liu, Pascale Bayle-Guillemaud, Olivier Bourgeois

Abstract: We report on the elaboration of germanium manganese nanostructured thin films and the measurement of their thermoelectric properties. We investigate the growth of Ge:Mn layers along with a thorough structural characterization of this materials at the nanoscale. The room temperature thermoelectric properties of these layers containing spherical inclusions are discussed regarding their potential as… ▽ More We report on the elaboration of germanium manganese nanostructured thin films and the measurement of their thermoelectric properties. We investigate the growth of Ge:Mn layers along with a thorough structural characterization of this materials at the nanoscale. The room temperature thermoelectric properties of these layers containing spherical inclusions are discussed regarding their potential as a model of "electron crystal phonon glass material". We show that the thermal conductivity can be decreased by a factor of 30, even if the electronic properties can be conserved as in the bulk. The thermoelectric performance ZT of such material is as high as 0.15 making them a promising thermoelectric p-type material for Ge related application. △ Less

Submitted 7 January, 2013; originally announced January 2013.

Highly sensitive thermal conductivity measurements of suspended membranes (SiN and diamond) using a 3w-Volklein method

Authors: A. Sikora, H. Ftouni, J. Richard, C. Hébert, D. Eon, F. Omnès, O. Bourgeois

Abstract: A suspended system for measuring the thermal properties of membranes is presented. The sensitive thermal measurement is based on the 3$ωおめが$ dynamic method coupled to a V$\ddot{o}$lklein geometry. The device obtained using micro-machining processes allows the measurement of the in-plane thermal conductivity of a membrane with a sensitivity of less than 10nW/K (+/-$5x10^{-3}$Wm$^{-1}K^{-1}$ at room te… ▽ More A suspended system for measuring the thermal properties of membranes is presented. The sensitive thermal measurement is based on the 3$ωおめが$ dynamic method coupled to a V$\ddot{o}$lklein geometry. The device obtained using micro-machining processes allows the measurement of the in-plane thermal conductivity of a membrane with a sensitivity of less than 10nW/K (+/-$5x10^{-3}$Wm$^{-1}K^{-1}$ at room temperature) and a very high resolution ($ΔでるたK/K =10^{-3}$). A transducer (heater/thermometer) centered on the membrane is used to create an oscillation of the heat flux and to measure the temperature oscillation at the third harmonic using a Wheatstone bridge set-up. Power as low as 0.1nanoWatt has been measured at room temperature. The method has been applied to measure thermal properties of low stress silicon nitride and polycrystalline diamond membranes with thickness ranging from 100 nm to 400 nm. The thermal conductivity measured on the polycrystalline diamond membrane support a significant grain size effect on the thermal transport. △ Less

Submitted 19 January, 2012; originally announced January 2012.

Comments: 17 pages

Audio mixing in a tri-port nano-electro-mechanical device

Authors: M. Defoort, K. Lulla, J. -S. Heron, O. Bourgeois, E. Collin, Fabio Pistolesi

Abstract: We report on experiments performed on a cantilever-based tri-port nano-electro-mechanical (NEMS) device. Two ports are used for actuation and detection through the magnetomotive scheme, while the third port is a capacitively coupled gate electrode. By applying a low frequency voltage signal on the gate, we demonstrate mixing in the mechanical response of the device, even for {\it low magnetomotive… ▽ More We report on experiments performed on a cantilever-based tri-port nano-electro-mechanical (NEMS) device. Two ports are used for actuation and detection through the magnetomotive scheme, while the third port is a capacitively coupled gate electrode. By applying a low frequency voltage signal on the gate, we demonstrate mixing in the mechanical response of the device, even for {\it low magnetomotive drives, without resorting to conduction measurements through the NEMS}. The technique can thus be used in particular in the linear regime, as an alternative to nonlinear mixing, for normal conducting devices. An analytic theory is presented reproducing the data without free parameters △ Less

Submitted 6 September, 2011; originally announced September 2011.

Journal ref: Applied Physics Letters 99, 23 (2011) 233107 (1-3)

Thermodynamics of small systems by nanocalorimetry: from physical to biological nano-objects

Authors: Jean-Luc Garden, Hervé Guillou, Aitor Fernandez Lopeandia, Jacques Richard, Jean-Savin Heron, Germain Souche, Florian Ong, Benoit Vianay, Olivier Bourgeois

Abstract: Membrane based nanocalorimeters have been developed for ac calorimetry experiments. It has allowed highly sensitive measurements of heat capacity from solid state physics to complex systems like polymers and proteins. In this article we review what has been developed in ac calorimetry toward the measurement of very small systems. Firstly, at low temperature ac calorimetry using silicon membrane… ▽ More Membrane based nanocalorimeters have been developed for ac calorimetry experiments. It has allowed highly sensitive measurements of heat capacity from solid state physics to complex systems like polymers and proteins. In this article we review what has been developed in ac calorimetry toward the measurement of very small systems. Firstly, at low temperature ac calorimetry using silicon membrane permits the measurement of superconducting sample having geometry down to the nanometer scale. New phase transitions have been found in these nanosystems illustrated by heat capacity jumps versus the applied magnetic field. Secondly, a sensor based on ultra-thin polymer membrane will be presented. It has been devoted to thermal measurements of nanomagnetic systems at intermediate temperature (20K to 300K). Thirdly, three specific polyimide membrane based sensors have been designed for room temperature measurements. One is devoted to phase transitions detection in polymer, the second one to protein folding/unfolding studies and the third one will be used for the study of heat release in living cells. The possibility of measuring systems out of equilibrium will be emphasized. △ Less

Submitted 5 August, 2009; originally announced August 2009.

Journal ref: Thermochimica Acta 492 (2009) 16-28

Temperature fluctuations in the Ultimate Regime of Convection

Authors: Frédéric Gauthier, Julien Salort, Olivier Bourgeois, Jean-Luc Garden, Ronald Du Puits, Andre Thess, Philippe-Emmanuel P. -E. Roche

Abstract: A new regime of turbulent convection has been reported nearly one decade ago, based on global heat transfer measurements at very high Rayleigh numbers. We examine the signature of this "Ultimate Regime" from within the flow itself. A systematic study of probe-size corrections shows that the earlier temperature measurements within the flow were altered by an excessive size of thermometer, but not… ▽ More A new regime of turbulent convection has been reported nearly one decade ago, based on global heat transfer measurements at very high Rayleigh numbers. We examine the signature of this "Ultimate Regime" from within the flow itself. A systematic study of probe-size corrections shows that the earlier temperature measurements within the flow were altered by an excessive size of thermometer, but not according to a theoretical model proposed in the literature. Using a probe one order of magnitude smaller than the one used previously, we find evidence that the transition to the Ultimate Regime is indeed accompanied with a clear change in the statistics of temperature fluctuations in the flow. △ Less

Submitted 17 May, 2009; originally announced May 2009.

Comments: Submitted for publication

Phase-Dependent Electronic Specific Heat in Mesoscopic Josephson Junctions

Authors: H. Rabani, F. Taddei, O. Bourgeois, R. Fazio, F. Giazotto

Abstract: We study the influence of superconducting correlations on the electronic specific heat in a diffusive superconductor-normal metal-superconductor Josephson junction. We present a description of this system in the framework of the diffusive-limit Green's function theory, taking into account finite temperatures, phase difference as well as junction parameters. We find that proximity effect may lead… ▽ More We study the influence of superconducting correlations on the electronic specific heat in a diffusive superconductor-normal metal-superconductor Josephson junction. We present a description of this system in the framework of the diffusive-limit Green's function theory, taking into account finite temperatures, phase difference as well as junction parameters. We find that proximity effect may lead to a substantial deviation of the specific heat as compared to that in the normal state, and that it can be largely tuned in magnitude by changing the phase difference between the superconductors. A measurement setup to confirm these predictions is also suggested. △ Less

Submitted 7 May, 2008; originally announced May 2008.

Comments: 4+ pages, 4 figures

Journal ref: Phys. Rev. B 78, 012503 (2008)

Topology effects on the heat capacity of mesoscopic superconducting disks

Authors: F. R. Ong, Olivier Bourgeois

Abstract: Phase transitions in superconducting mesoscopic disks have been studied over the H-T phase diagram through heat capacity measurement of an array of independent aluminium disks. These disks exhibit non periodic modulations versus H of the height of the heat capacity jump at the superconducting to normal transition. This behaviour is attributed to giant vortex states characterized by their vortici… ▽ More Phase transitions in superconducting mesoscopic disks have been studied over the H-T phase diagram through heat capacity measurement of an array of independent aluminium disks. These disks exhibit non periodic modulations versus H of the height of the heat capacity jump at the superconducting to normal transition. This behaviour is attributed to giant vortex states characterized by their vorticity L. A crossover from a bulk-like to a mesoscopic behaviour is demonstrated. $C_{\rm p}$ versus H plots exhibit cascades of phase transitions as L increases or decreases by one unity, with a strong hysteresis. Phase diagrams of giant vortex states inside the superconducting region are drawn in the vortex penetration and expulsion regimes and phase transitions driven by temperature between vortex states are thus predicted in the zero field cooled regime before being experimentally evidenced. △ Less

Submitted 22 August, 2007; originally announced August 2007.

Fine frequency shift of sigle vortex entrance and exit in superconducting loops

Authors: F. R. Ong, Olivier Bourgeois, S. E. Skipetrov, J. Chaussy, Simona Popa, Jérôme Mars, Jean-Louis Lacoume

Abstract: The heat capacity $C_{p}$ of an array of independent aluminum rings has been measured under an external magnetic field $\vec{H}$ using highly sensitive ac-calorimetry based on a silicon membrane sensor. Each superconducting vortex entrance induces a phase transition and a heat capacity jump and hence $C_{p}$ oscillates with $\vec{H}$. This oscillatory and non-stationary behaviour measured versus… ▽ More The heat capacity $C_{p}$ of an array of independent aluminum rings has been measured under an external magnetic field $\vec{H}$ using highly sensitive ac-calorimetry based on a silicon membrane sensor. Each superconducting vortex entrance induces a phase transition and a heat capacity jump and hence $C_{p}$ oscillates with $\vec{H}$. This oscillatory and non-stationary behaviour measured versus the magnetic field has been studied using the Wigner-Ville distribution (a time-frequency representation). It is found that the periodicity of the heat capacity oscillations varies significantly with the magnetic field; the evolution of the period also depends on the sweeping direction of the field. This can be attributed to a different behavior between expulsion and penetration of vortices into the rings. A variation of more than 15% of the periodicity of the heat capacity jumps is observed as the magnetic field is varied. A description of this phenomenon is given using an analytical solution of the Ginzburg-Landau equations of superconductivity. △ Less

Submitted 22 August, 2007; originally announced August 2007.

Non-equilibrium heat capacity of polytetrafluoroethylene at room temperature

Authors: Jean-Luc Garden, Jacques Richard, H. Guillou, O. Bourgeois

Abstract: Polytetrafluoroethylene can be considered as a model for calorimetric studies of complex systems with thermodynamics transitions at ambient temperature. This polymer exhibits two phase transitions of different nature at 292 K and 303 K. We show that sensitive ac-calorimetry measurements allow us to study the thermodynamic behaviour of polytetrafluoroethylene when it is brought out of thermodynam… ▽ More Polytetrafluoroethylene can be considered as a model for calorimetric studies of complex systems with thermodynamics transitions at ambient temperature. This polymer exhibits two phase transitions of different nature at 292 K and 303 K. We show that sensitive ac-calorimetry measurements allow us to study the thermodynamic behaviour of polytetrafluoroethylene when it is brought out of thermodynamic equilibrium. Thanks to the thermal modelisation of our calorimetric device, the frequency dependent complex heat capacity of this polymer is extracted. The temperature and frequency variations of the real and imaginary parts of the complex heat capacity are obtained when polytetrafluoroethylene undergoes its first-order structural phase transition at 292 K. △ Less

Submitted 27 June, 2007; originally announced June 2007.

Thermal signatures of Little-Parks effect in the heat capacity of mesoscopic superconducting rings

Authors: Florian R. Ong, Olivier Bourgeois, Sergey E. Skipetrov, Jacques Chaussy

Abstract: We present the first measurements of thermal signatures of the Little-Parks effect using a highly sensitive nanocalorimeter. Small variations of the heat capacity $C\_p$ of 2.5 millions of non interacting micrometer-sized superconducting rings threaded by a magnetic flux $Φふぁい$ have been measured by attojoule calorimetry. This non-invasive method allows the measurement of thermodynamic properties -… ▽ More We present the first measurements of thermal signatures of the Little-Parks effect using a highly sensitive nanocalorimeter. Small variations of the heat capacity $C\_p$ of 2.5 millions of non interacting micrometer-sized superconducting rings threaded by a magnetic flux $Φふぁい$ have been measured by attojoule calorimetry. This non-invasive method allows the measurement of thermodynamic properties -- and hence the probing of the energy levels -- of nanosystems without perturbing them electrically. It is observed that $C\_p$ is strongly influenced by the fluxoid quantization (Little-Parks effect) near the critical temperature $T\_c$. The jump of $C\_p$ at the superconducting phase transition is an oscillating function of $Φふぁい$ with a period $Φふぁい\_0=h/2e$, the magnetic flux quantum, which is in agreement with the Ginzburg-Landau theory of superconductivity. △ Less

Submitted 21 September, 2006; originally announced September 2006.

Comments: To be published in Physical Review B, Rapid Communications

Measurement of thermal conductance of silicon nanowires at low temperature

Authors: Olivier Bourgeois, T. Fournier, J. Chaussy

Abstract: We have performed thermal conductance measurements on individual single crystalline silicon suspended nanowires. The nanowires (130 nm thick and 200 nm wide) are fabricated by e-beam lithography and suspended between two separated pads on Silicon On Insulator (SOI) substrate. We measure the thermal conductance of the phonon wave guide by the 3&#61559; method. The cross-section of the nanowire ap… ▽ More We have performed thermal conductance measurements on individual single crystalline silicon suspended nanowires. The nanowires (130 nm thick and 200 nm wide) are fabricated by e-beam lithography and suspended between two separated pads on Silicon On Insulator (SOI) substrate. We measure the thermal conductance of the phonon wave guide by the 3&#61559; method. The cross-section of the nanowire approaches the dominant phonon wavelength in silicon which is of the order of 100 nm at 1K. Above 1.3K the conductance behaves as T3, but a deviation is measured at the lowest temperature which can be attributed to the reduced geometry. △ Less

Submitted 31 August, 2006; originally announced August 2006.

New sensor for thermodynamic measurement of magnetization reversal in magnetic nanomaterials

Authors: Olivier Bourgeois, Cristina Macovei, Emmanuel André, Jean-Luc Garden, Jacques Chaussy, Dominique Givord

Abstract: A sensor for thermal and thermodynamic measurements of small magnetic systems have been designed and built. It is based on a 5&mu;m-thick suspended polymer membrane, which has a very low heat capacity (&asymp; 10-6 J/K at nitrogen temperature), and on which a heater and a highly sensitive thermometer are deposited. The sensor properties have been characterized as a function of temperature and fr… ▽ More A sensor for thermal and thermodynamic measurements of small magnetic systems have been designed and built. It is based on a 5&mu;m-thick suspended polymer membrane, which has a very low heat capacity (&asymp; 10-6 J/K at nitrogen temperature), and on which a heater and a highly sensitive thermometer are deposited. The sensor properties have been characterized as a function of temperature and frequency. Energy exchanges as small as 1 picojoule (10-12 Joule) were detected in the 40K- 300K temperature range. Such values correspond to those required for measuring the thermal signatures occurring during magnetization reversal in very thin samples (typically 10 nm thick), which would be deposited on the membrane. It is expected that this method will constitute a powerful tool in view of analyzing magnetization reversal processes in magnetic nanosystems, e.g. exhibiting the exchange-spring and exchange-bias phenomena. △ Less

Submitted 21 August, 2006; originally announced August 2006.

Specific heat measurement of mesoscopic loops

Authors: O. Bourgeois, F. Ong, S. E. Skipetrov, J. Chaussy

Abstract: We report highly sensitive specific heat measurement on mesoscopic superconducting loops at low temperature. These mesoscopic systems exhibit thermal properties significantly different from that of the bulk materials. The measurement is performed on a silicon membrane sensor where 450 000 superconducting aluminium loops are deposited through electron beam lithography under an applied magnetic fi… ▽ More We report highly sensitive specific heat measurement on mesoscopic superconducting loops at low temperature. These mesoscopic systems exhibit thermal properties significantly different from that of the bulk materials. The measurement is performed on a silicon membrane sensor where 450 000 superconducting aluminium loops are deposited through electron beam lithography under an applied magnetic field. Each entry of a vortex is associated to a jump in the specific heat of few thousands of Boltzmann constant kB indicating the existence of phase transitions. The periodicity of this sequential phase transitions is a nontrivial behaviour and varies strongly as the temperature is decreased. The successive phase transitions are well described by the Ginzburg-Landau theory of superconductivity. The presence of metastable states is responsible for the n-&#61510;0 (n=1, 2, 3...) periodicity of the discontinuities of the measured specific heat. △ Less

Submitted 16 December, 2005; originally announced December 2005.

Comments: 4 pages, Proceeding of the 24th International Conference on Low Temperature Physics in Orlando (2005)

Attojoule calorimetry of mesoscopic superconducting loops

Authors: O. Bourgeois, S. E. Skipetrov, F. Ong, J. Chaussy

Abstract: We report the first experimental evidence of nontrivial thermal behavior of the simplest mesoscopic system - a superconducting loop. By measuring the specific heat C of an array of 450,000 noninteracting aluminum loops with very high accuracy of ~20 fJ/K, we show that the loops go through a periodic sequence of phase transitions (with period of an integer number of magnetic flux quanta) as the m… ▽ More We report the first experimental evidence of nontrivial thermal behavior of the simplest mesoscopic system - a superconducting loop. By measuring the specific heat C of an array of 450,000 noninteracting aluminum loops with very high accuracy of ~20 fJ/K, we show that the loops go through a periodic sequence of phase transitions (with period of an integer number of magnetic flux quanta) as the magnetic flux threading each loop is increased. The transitions are well described by the Ginzburg-Landau theory and are accompanied by discontinuities of C of only several thousands of Boltzmann constants k_B. △ Less

Submitted 10 November, 2004; originally announced November 2004.

Comments: RevTeX, 4 pages, 4 figures

Journal ref: Phys. Rev. Lett. 94, 057007 (2005)

Proximity effect in ultrathin Pb/Ag multilayers within the Cooper limit

Authors: O. Bourgeois, A. Frydman, R. C. Dynes

Abstract: We report on transport and tunneling measurements performed on ultra-thin Pb/Ag (strong coupled superconductor/normal metal) multilayers evaporated by quench condensation. The critical temperature and energy gap of the heterostructures oscillate with addition of each layer, demonstrating the validity of the Cooper limit model in the case of multilayers. We observe excellent agreement with a simp… ▽ More We report on transport and tunneling measurements performed on ultra-thin Pb/Ag (strong coupled superconductor/normal metal) multilayers evaporated by quench condensation. The critical temperature and energy gap of the heterostructures oscillate with addition of each layer, demonstrating the validity of the Cooper limit model in the case of multilayers. We observe excellent agreement with a simple theory for samples with layer thickness larger than 30Å. Samples with single layers thinner than 30Ådeviate from the Cooper limit theory. We suggest that this is due to the "inverse proximity effect" where the normal metal electrons improve screening in the superconducting ultrathin layer and thus enhance the critical temperature. △ Less

Submitted 13 February, 2003; originally announced February 2003.

Comments: 4 pages, 4 figures

Journal ref: Phys. Rev. B, 68, 092509 (2003)

Spin accumulation in FS junctions

Authors: R. Mélin, O. Bourgeois

Abstract: We consider Andreev reflection in ferromagnet-superconductor junctions and extend the treatment by de Jong and Beenakker to incorporate the effect of a repulsive potential at the interface. We show the existence of a spin accumulation at a finite voltage in this model. We consider Andreev reflection in ferromagnet-superconductor junctions and extend the treatment by de Jong and Beenakker to incorporate the effect of a repulsive potential at the interface. We show the existence of a spin accumulation at a finite voltage in this model. △ Less

Submitted 19 June, 1999; v1 submitted 12 March, 1999; originally announced March 1999.

Comments: 5 pages, 1 figure, Talk given at the XXXIVth Rencontres de Moriond 1999 (Quantum Physics at Mesoscopic Scale)

Enhancement of Andreev reflection by spin polarization in out-of-equilibrium ferromagnet-superconductor junctions

Authors: O. Bourgeois, P. Gandit, J. Lesueur, R. Mélin, A. Sulpice, X. Grison, J. Chaussy

Abstract: We report on transport measurements on Nb/Al/Gd/Al/Nb junctions.Bulk Gadolinium is a weakly polarized ferromagnet (5-7%), and is present in the junction in granular form (superparamagnet). We show that Andreev reflection is strongly enhanced by a weak polarization, obtained by applying an external magnetic field. A new model is proposed that accounts for this effect. The transport is described i… ▽ More We report on transport measurements on Nb/Al/Gd/Al/Nb junctions.Bulk Gadolinium is a weakly polarized ferromagnet (5-7%), and is present in the junction in granular form (superparamagnet). We show that Andreev reflection is strongly enhanced by a weak polarization, obtained by applying an external magnetic field. A new model is proposed that accounts for this effect. The transport is described in terms of ``hot'' carriers that experience Zeeman splitting due to the spin polarized background. The Landauer formula is $G=(4e^2)/h A(h_b)$, $h_b$ being the exchange field at the grain boundary, and A(E) the Andreev current coefficient, that increases with E for resistive junctions. △ Less

Submitted 7 January, 1999; originally announced January 1999.

Comments: 4 pages, 4 figures, RevTex