Showing 1–9 of 9 results for author: Brouwer, L

Electromagnetic modeling and science reach of DMRadio-m$^3$

Authors: DMRadio Collaboration, A. AlShirawi, C. Bartram, J. N. Benabou, L. Brouwer, S. Chaudhuri, H. -M. Cho, J. Corbin, W. Craddock, A. Droster, J. W. Foster, J. T. Fry, P. W. Graham, R. Henning, K. D. Irwin, F. Kadribasic, Y. Kahn, A. Keller, R. Kolevatov, S. Kuenstner, N. Kurita, A. F. Leder, D. Li, J. L. Ouellet, K. M. W. Pappas , et al. (12 additional authors not shown)

Abstract: DMRadio-m$^3$ is an experiment that is designed to be sensitive to KSVZ and DFSZ QCD axion models in the 10-200 MHz (41 neV$/c^2$ - 0.83 $μみゅー$eV/$c^2$) range. The experiment uses a solenoidal dc magnetic field to convert an axion dark-matter signal to an ac electromagnetic response in a coaxial copper pickup. The current induced by this axion signal is measured by dc SQUIDs. In this work, we present… ▽ More DMRadio-m$^3$ is an experiment that is designed to be sensitive to KSVZ and DFSZ QCD axion models in the 10-200 MHz (41 neV$/c^2$ - 0.83 $μみゅー$eV/$c^2$) range. The experiment uses a solenoidal dc magnetic field to convert an axion dark-matter signal to an ac electromagnetic response in a coaxial copper pickup. The current induced by this axion signal is measured by dc SQUIDs. In this work, we present the electromagnetic modeling of the response of the experiment to an axion signal over the full frequency range of DMRadio-m$^3$, which extends from the low-frequency, lumped-element limit to a regime where the axion Compton wavelength is only a factor of two larger than the detector size. With these results, we determine the live time and sensitivity of the experiment. The primary science goal of sensitivity to DFSZ axions across 30-200 MHz can be achieved with a $3σしぐま$ live scan time of 3.7 years. △ Less

Submitted 27 February, 2023; originally announced February 2023.

Comments: 14 pages, 6 figures

Conceptual design of 20 T hybrid accelerator dipole magnets

Authors: P. Ferracin, G. Ambrosio, M. Anerella, D. Arbelaez, L. Brouwer, E. Barzi, L. Cooley, J. Cozzolino, L. Garcia Fajardo, R. Gupta, M. Juchno, V. V. Kashikhin, F. Kurian, V. Marinozzi, I. Novitski, E. Rochepault, J. Stern, G. Vallone, B. Yahia, A. V. Zlobin

Abstract: Hybrid magnets are currently under consideration as an economically viable option towards 20 T dipole magnets for next generation of particle accelerators. In these magnets, High Temperature Superconducting (HTS) materials are used in the high field part of the coil with so-called insert coils, and Low Temperature Superconductors (LTS) like Nb3Sn and Nb-Ti superconductors are used in the lower fie… ▽ More Hybrid magnets are currently under consideration as an economically viable option towards 20 T dipole magnets for next generation of particle accelerators. In these magnets, High Temperature Superconducting (HTS) materials are used in the high field part of the coil with so-called insert coils, and Low Temperature Superconductors (LTS) like Nb3Sn and Nb-Ti superconductors are used in the lower field region with so-called outsert coils. The attractiveness of the hybrid option lays on the fact that, on the one hand, the 20 T field level is beyond the Nb3Sn practical limits of 15-16 T for accelerator magnets and can be achieved only via HTS materials; on the other hand, the high cost of HTS superconductors compared to LTS superconductors makes it advantageous exploring a hybrid approach, where the HTS portion of the coil is minimized. We present in this paper an overview of different design options aimed at generating 20 T field in a 50 mm clear aperture. The coil layouts investigated include the Cos-theta design (CT), with its variations to reduce the conductor peak stress, namely the Canted Cos-theta design (CCT) and the Stress Management Cos-theta design (SMCT), and, in addition, the Block-type design (BL) including a form of stress management and the Common-Coil design (CC). Results from a magnetic and mechanical analysis are discussed, with particular focus on the comparison between the different options regarding quantity of superconducting material, field quality, conductor peak stress, and quench protection. △ Less

Submitted 9 February, 2023; originally announced February 2023.

Report number: FERMILAB-PUB-22-856-TD

Towards 20 T Hybrid Accelerator Dipole Magnets

Authors: P. Ferracin, G. Ambrosio, D. Arbelaez, L. Brouwer, E. Barzi, L. Cooley, L. Garcia Fajardo, R. Gupta, M. Juchno, V. Kashikhin, V. Marinozzi, I. Novitski, E. Rochepault, J. Stern, A. Zlobin, N. Zucchi

Abstract: The most effective way to achieve very high collision energies in a circular particle accelerator is to maximize the field strength of the main bending dipoles. In dipole magnets using Nb-Ti superconductor the practical field limit is considered to be 8-9 T. When Nb3Sn superconductor material is utilized, a field level of 15-16 T can be achieved. To further push the magnetic field beyond the Nb3Sn… ▽ More The most effective way to achieve very high collision energies in a circular particle accelerator is to maximize the field strength of the main bending dipoles. In dipole magnets using Nb-Ti superconductor the practical field limit is considered to be 8-9 T. When Nb3Sn superconductor material is utilized, a field level of 15-16 T can be achieved. To further push the magnetic field beyond the Nb3Sn limits, High Temperature Superconductors (HTS) need to be considered in the magnet design. The most promising HTS materials for particle accelerator magnets are Bi2212 and REBCO. However, their outstanding performance comes with a significantly higher cost. Therefore, an economically viable option towards 20 T dipole magnets could consist in an hybrid solution, where both HTS and Nb3Sn materials are used. We discuss in this paper preliminary conceptual designs of various 20 T hybrid magnet concepts. After the definition of the overall design criteria, the coil dimensions and parameters are investigated with finite element models based on simple sector coils. Preliminary 2D cross-section computation results are then presented and three main layouts compared: cos-theta, block, and common-coil. Both traditional designs and more advanced stress-management options are considered. △ Less

Submitted 30 August, 2022; originally announced August 2022.

Comments: arXiv admin note: substantial text overlap with arXiv:2203.13985

Report number: FERMILAB-PUB-22-221-TD

Projected Sensitivity of DMRadio-m$^3$: A Search for the QCD Axion Below $1\,μみゅー$eV

Authors: DMRadio Collaboration, L. Brouwer, S. Chaudhuri, H. -M. Cho, J. Corbin, W. Craddock, C. S. Dawson, A. Droster, J. W. Foster, J. T. Fry, P. W. Graham, R. Henning, K. D. Irwin, F. Kadribasic, Y. Kahn, A. Keller, R. Kolevatov, S. Kuenstner, A. F. Leder, D. Li, J. L. Ouellet, K. Pappas, A. Phipps, N. M. Rapidis, B. R. Safdi , et al. (9 additional authors not shown)

Abstract: The QCD axion is one of the most compelling candidates to explain the dark matter abundance of the universe. With its extremely small mass ($\ll 1\,\mathrm{eV}/c^2$), axion dark matter interacts as a classical field rather than a particle. Its coupling to photons leads to a modification of Maxwell's equations that can be measured with extremely sensitive readout circuits. DMRadio-m$^3$ is a next-g… ▽ More The QCD axion is one of the most compelling candidates to explain the dark matter abundance of the universe. With its extremely small mass ($\ll 1\,\mathrm{eV}/c^2$), axion dark matter interacts as a classical field rather than a particle. Its coupling to photons leads to a modification of Maxwell's equations that can be measured with extremely sensitive readout circuits. DMRadio-m$^3$ is a next-generation search for axion dark matter below $1\,μみゅー$eV using a $>4$ T static magnetic field, a coaxial inductive pickup, a tunable LC resonator, and a DC-SQUID readout. It is designed to search for QCD axion dark matter over the range $20\,\mathrm{neV}\lesssim m_ac^2\lesssim 800\,\mathrm{neV}$ ($5\,\mathrm{MHz}<νにゅー<200\,\mathrm{MHz}$). The primary science goal aims to achieve DFSZ sensitivity above $m_ac^2\approx 120$ neV (30 MHz), with a secondary science goal of probing KSVZ axions down to $m_ac^2\approx40\,\mathrm{neV}$ (10 MHz). △ Less

Submitted 8 December, 2022; v1 submitted 28 April, 2022; originally announced April 2022.

Comments: 8 pages, 4 figures. Updated to fix small errors and correct acknowledgements. Updated title and notational clarifications

A Strategic Approach to Advance Magnet Technology for Next Generation Colliders

Authors: G. Ambrosio, K. Amm, M. Anerella, G. Apollinari, D. Arbelaez, B. Auchmann, S. Balachandran, M. Baldini, A. Ballarino, S. Barua, E. Barzi, A. Baskys, C. Bird, J. Boerme, E. Bosque, L. Brouwer, S. Caspi, N. Cheggour, G. Chlachidze, L. Cooley, D. Davis, D. Dietderich, J. DiMarco, L. English, L. Garcia Fajardo , et al. (52 additional authors not shown)

Abstract: Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the domi… ▽ More Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the dominant cost driver for future collider facilities. As the community considers opportunities to explore new energy frontiers, the importance of advanced magnet technology - both in terms of magnet performance and in the magnet technology's potential for cost reduction - is evident, as the technology status is essential for informed decisions on targets for physics reach and facility feasibility. △ Less

Submitted 26 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Introducing DMRadio-GUT, a search for GUT-scale QCD axions

Authors: L. Brouwer, S. Chaudhuri, H. -M. Cho, J. Corbin, C. S. Dawson, A. Droster, J. W. Foster, J. T. Fry, P. W. Graham, R. Henning, K. D. Irwin, F. Kadribasic, Y. Kahn, A. Keller, R. Kolevatov, S. Kuenstner, A. F. Leder, D. Li, J. L. Ouellet, K. M. W. Pappas, A. Phipps, N. M. Rapidis, B. R. Safdi, C. P. Salemi, M. Simanovskaia , et al. (7 additional authors not shown)

Abstract: The QCD axion is a leading dark matter candidate that emerges as part of the solution to the strong CP problem in the Standard Model. The coupling of the axion to photons is the most common experimental probe, but much parameter space remains unexplored. The coupling of the QCD axion to the Standard Model scales linearly with the axion mass; therefore, the highly-motivated region 0.4-120 neV, corr… ▽ More The QCD axion is a leading dark matter candidate that emerges as part of the solution to the strong CP problem in the Standard Model. The coupling of the axion to photons is the most common experimental probe, but much parameter space remains unexplored. The coupling of the QCD axion to the Standard Model scales linearly with the axion mass; therefore, the highly-motivated region 0.4-120 neV, corresponding to a GUT-scale axion, is particularly difficult to reach. This paper presents the design requirements for a definitive search for GUT-scale axions and reviews the technological advances needed to enable this program. △ Less

Submitted 21 March, 2022; originally announced March 2022.

Comments: 16 pages, 4 figures

Journal ref: Phys.Rev.D 106 (2022) 11, 112003

Snowmass21 Accelerator Modeling Community White Paper

Authors: S. Biedron, L. Brouwer, D. L. Bruhwiler, N. M. Cook, A. L. Edelen, D. Filippetto, C. -K. Huang, A. Huebl, T. Katsouleas, N. Kuklev, R. Lehe, S. Lund, C. Messe, W. Mori, C. -K. Ng, D. Perez, P. Piot, J. Qiang, R. Roussel, D. Sagan, A. Sahai, A. Scheinker, M. Thévenet, F. Tsung, J. -L. Vay , et al. (2 additional authors not shown)

Abstract: After a summary of relevant comments and recommendations from various reports over the last ten years, this paper examines the modeling needs in accelerator physics, from the modeling of single beams and individual accelerator elements, to the realization of virtual twins that replicate all the complexity to model a particle accelerator complex as accurately as possible. We then discuss cutting-ed… ▽ More After a summary of relevant comments and recommendations from various reports over the last ten years, this paper examines the modeling needs in accelerator physics, from the modeling of single beams and individual accelerator elements, to the realization of virtual twins that replicate all the complexity to model a particle accelerator complex as accurately as possible. We then discuss cutting-edge and emerging computing opportunities, such as advanced algorithms, AI/ML and quantum computing, computational needs in hardware, software performance, portability and scalability, and needs for scalable I/O and in-situ analysis. Considerations of reliability, long-term sustainability, user support and training are considered next, before discussing the benefits of ecosystems with integrated workflows based on standardized input and output, and with integrated frameworks and data repositories developed as a community. Last, we highlight how the community can work more collaboratively and efficiently through the development of consortia and centers, and via collaboration with industry. △ Less

Submitted 22 September, 2022; v1 submitted 15 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

A Carbon-Ion Superconducting Gantry and a Synchrotron Based on Canted Cosine Theta Magnets

Authors: E. Benedetto, N. Al Harbi, L. Brouwer, D. Tommasini, S. Prestemon, P. Riboni, U. Amaldi

Abstract: This article presents the conceptual design of a new compact superconducting gantry and synchrotron for Carbon ion therapy and focuses on the solutions (layout and optics) to make it compact. The main specificity of this gantry design is to be smaller and lighter with respect to the existing carbon-ion gantries. This is achieved by adopting an innovative mechanical design and by using superconduct… ▽ More This article presents the conceptual design of a new compact superconducting gantry and synchrotron for Carbon ion therapy and focuses on the solutions (layout and optics) to make it compact. The main specificity of this gantry design is to be smaller and lighter with respect to the existing carbon-ion gantries. This is achieved by adopting an innovative mechanical design and by using superconducting magnets of the Canted Cosine Theta type with a small aperture. The optics is optimized to reduce the beam size, it is achromatic and it is independent of the rotation angle (for an incoming round beam). A preliminary synchrotron layout based on similar superconducting magnets units is presented and the dose delivery specificities are discussed. △ Less

Submitted 10 May, 2021; originally announced May 2021.

Comments: Submitted to Physics in Medicine and Biology

Magnetization Current Simulation of High Temperature Bulk Superconductors Using A-V-A Formulation and Iterative Algorithm Method: Critical State Model and Flux Creep Model

Authors: Kai Zhang, Sebastian Hellmann, Marco Calvi, Thomas Schmidt, Lucas Brouwer

Abstract: In this work we will introduce the A-V-A formulation based iterative algorithm method (IAM) for simulating the magnetization current of high temperature superconductors. This new method embedded in ANSYS can simulate the critical state model by forcing the trapped current density to the critical current density Jc for all meshed superconducting elements after each iterative load step, as well as s… ▽ More In this work we will introduce the A-V-A formulation based iterative algorithm method (IAM) for simulating the magnetization current of high temperature superconductors. This new method embedded in ANSYS can simulate the critical state model by forcing the trapped current density to the critical current density Jc for all meshed superconducting elements after each iterative load step, as well as simulate the flux creep model by updating the E-J power law based resistivity values. The simulation results of a disk-shaped ReBCO bulk during zero field cooling (ZFC) or field cooling (FC) magnetization agree well with the simulation results from using the H-formulation in COMSOL. The computation time is shortened by using the A-V formulation in superconductor areas and the A-formulation in non-superconductor areas. This iterative method is further proved friendly for adding ferromagnetic materials into the FEA model or taking into account the magnetic field-dependent or mechanical strain-related critical current density of the superconductors. The influence factors for the magnetization simulation, including the specified iterative load steps, the initial resistivity, the ramping time and the updating coefficient, are discussed in detail. The A-V-A formulation based IAM, implemented in ANSYS, shows its unique advantages in adjustable computation time, multi-frame restart analysis and easy-convergence. △ Less

Submitted 19 February, 2020; v1 submitted 13 August, 2019; originally announced August 2019.

Journal ref: IEEE Transactions on Applied Superconductivity 2020