Showing 1–34 of 34 results for author: Buller, G S

3D Target Detection and Spectral Classification for Single-photon LiDAR Data

Authors: Mohamed Amir Alaa Belmekki, Jonathan Leach, Rachael Tobin, Gerald S. Buller, Stephen Mclaughlin, Abderrahim Halimi

Abstract: 3D single-photon LiDAR imaging has an important role in many applications. However, full deployment of this modality will require the analysis of low signal to noise ratio target returns and a very high volume of data. This is particularly evident when imaging through obscurants or in high ambient background light conditions. This paper proposes a multiscale approach for 3D surface detection from… ▽ More 3D single-photon LiDAR imaging has an important role in many applications. However, full deployment of this modality will require the analysis of low signal to noise ratio target returns and a very high volume of data. This is particularly evident when imaging through obscurants or in high ambient background light conditions. This paper proposes a multiscale approach for 3D surface detection from the photon timing histogram to permit a significant reduction in data volume. The resulting surfaces are background-free and can be used to infer depth and reflectivity information about the target. We demonstrate this by proposing a hierarchical Bayesian model for 3D reconstruction and spectral classification of multispectral single-photon LiDAR data. The reconstruction method promotes spatial correlation between point-cloud estimates and uses a coordinate gradient descent algorithm for parameter estimation. Results on simulated and real data show the benefits of the proposed target detection and reconstruction approaches when compared to state-of-the-art processing algorithms △ Less

Submitted 19 February, 2023; originally announced February 2023.

Optical quantum super-resolution imaging and hypothesis testing

Authors: Ugo Zanforlin, Cosmo Lupo, Peter W. R. Connolly, Pieter Kok, Gerald S. Buller, Zixin Huang

Abstract: Estimating the angular separation between two incoherent thermal sources is a challenging task for direct imaging, especially when it is smaller than or comparable to the Rayleigh length. In addition, the task of discriminating whether there are one or two sources followed by detecting the faint emission of a secondary source in the proximity of a much brighter one is in itself a severe challenge… ▽ More Estimating the angular separation between two incoherent thermal sources is a challenging task for direct imaging, especially when it is smaller than or comparable to the Rayleigh length. In addition, the task of discriminating whether there are one or two sources followed by detecting the faint emission of a secondary source in the proximity of a much brighter one is in itself a severe challenge for direct imaging. Here, we experimentally demonstrate two tasks for superresolution imaging based on quantum state discrimination and quantum imaging techniques. We show that one can significantly reduce the probability of error for detecting the presence of a weak secondary source, especially when the two sources have small angular separations. In this work, we reduce the experimental complexity down to a single two-mode interferometer: we show that (1) this simple set-up is sufficient for the state discrimination task, and (2) if the two sources are of equal brightness, then this measurement can super-resolve their angular separation, saturating the quantum Cramér-Rao bound. By using a collection baseline of 5.3~mm, we resolve the angular separation of two sources that are placed 15~$μみゅー$m apart at a distance of 1.0~m with an accuracy of $1.7\%$--this is between 2 to 3 orders of magnitudes more accurate than shot-noise limited direct imaging. △ Less

Submitted 18 February, 2022; originally announced February 2022.

Comments: 17 pages, 16 figures

Fast Task-Based Adaptive Sampling for 3D Single-Photon Multispectral Lidar Data

Authors: Mohamed Amir Alaa Belmekki, Rachael Tobin, Gerald S. Buller, Stephen McLaughlin, Abderrahim Halimi

Abstract: 3D single-photon LiDAR imaging plays an important role in numerous applications. However, long acquisition times and significant data volumes present a challenge to LiDAR imaging. This paper proposes a task-optimized adaptive sampling framework that enables fast acquisition and processing of high-dimensional single-photon LiDAR data. Given a task of interest, the iterative sampling strategy target… ▽ More 3D single-photon LiDAR imaging plays an important role in numerous applications. However, long acquisition times and significant data volumes present a challenge to LiDAR imaging. This paper proposes a task-optimized adaptive sampling framework that enables fast acquisition and processing of high-dimensional single-photon LiDAR data. Given a task of interest, the iterative sampling strategy targets the most informative regions of a scene which are defined as those minimizing parameter uncertainties. The task is performed by considering a Bayesian model that is carefully built to allow fast per-pixel computations while delivering parameter estimates with quantified uncertainties. The framework is demonstrated on multispectral 3D single-photon LiDAR imaging when considering object classification and/or target detection as tasks. It is also analysed for both sequential and parallel scanning modes for different detector array sizes. Results on simulated and real data show the benefit of the proposed optimized sampling strategy when compared to fixed sampling strategies. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Robust and Guided Bayesian Reconstruction of Single-Photon 3D Lidar Data: Application to Multispectral and Underwater Imaging

Authors: Abderrahim Halimi, Aurora Maccarone, Robert Lamb, Gerald S. Buller, Stephen McLaughlin

Abstract: 3D Lidar imaging can be a challenging modality when using multiple wavelengths, or when imaging in high noise environments (e.g., imaging through obscurants). This paper presents a hierarchical Bayesian algorithm for the robust reconstruction of multispectral single-photon Lidar data in such environments. The algorithm exploits multi-scale information to provide robust depth and reflectivity estim… ▽ More 3D Lidar imaging can be a challenging modality when using multiple wavelengths, or when imaging in high noise environments (e.g., imaging through obscurants). This paper presents a hierarchical Bayesian algorithm for the robust reconstruction of multispectral single-photon Lidar data in such environments. The algorithm exploits multi-scale information to provide robust depth and reflectivity estimates together with their uncertainties to help with decision making. The proposed weight-based strategy allows the use of available guide information that can be obtained by using state-of-the-art learning based algorithms. The proposed Bayesian model and its estimation algorithm are validated on both synthetic and real images showing competitive results regarding the quality of the inferences and the computational complexity when compared to the state-of-the-art algorithms. △ Less

Submitted 18 March, 2021; originally announced March 2021.

Comments: 10 figures

Robust 3D reconstruction of dynamic scenes from single-photon lidar using Beta-divergences

Authors: Quentin Legros, Julian Tachella, Rachael Tobin, Aongus McCarthy, Sylvain Meignen, Gerald S. Buller, Yoann Altmann, Stephen McLaughlin, Michael E. Davies

Abstract: In this paper, we present a new algorithm for fast, online 3D reconstruction of dynamic scenes using times of arrival of photons recorded by single-photon detector arrays. One of the main challenges in 3D imaging using single-photon lidar in practical applications is the presence of strong ambient illumination which corrupts the data and can jeopardize the detection of peaks/surface in the signals… ▽ More In this paper, we present a new algorithm for fast, online 3D reconstruction of dynamic scenes using times of arrival of photons recorded by single-photon detector arrays. One of the main challenges in 3D imaging using single-photon lidar in practical applications is the presence of strong ambient illumination which corrupts the data and can jeopardize the detection of peaks/surface in the signals. This background noise not only complicates the observation model classically used for 3D reconstruction but also the estimation procedure which requires iterative methods. In this work, we consider a new similarity measure for robust depth estimation, which allows us to use a simple observation model and a non-iterative estimation procedure while being robust to mis-specification of the background illumination model. This choice leads to a computationally attractive depth estimation procedure without significant degradation of the reconstruction performance. This new depth estimation procedure is coupled with a spatio-temporal model to capture the natural correlation between neighboring pixels and successive frames for dynamic scene analysis. The resulting online inference process is scalable and well suited for parallel implementation. The benefits of the proposed method are demonstrated through a series of experiments conducted with simulated and real single-photon lidar videos, allowing the analysis of dynamic scenes at 325 m observed under extreme ambient illumination conditions. △ Less

Submitted 18 December, 2020; v1 submitted 20 April, 2020; originally announced April 2020.

Comments: 12 pages

Real-time 3D reconstruction from single-photon lidar data using plug-and-play point cloud denoisers

Authors: Julián Tachella, Yoann Altmann, Nicolas Mellado, Aongus McCarthy, Rachael Tobin, Gerald S. Buller, Jean-Yves Tourneret, Stephen McLaughlin

Abstract: Single-photon lidar has emerged as a prime candidate technology for depth imaging through challenging environments. Until now, a major limitation has been the significant amount of time required for the analysis of the recorded data. Here we show a new computational framework for real-time three-dimensional (3D) scene reconstruction from single-photon data. By combining statistical models with hig… ▽ More Single-photon lidar has emerged as a prime candidate technology for depth imaging through challenging environments. Until now, a major limitation has been the significant amount of time required for the analysis of the recorded data. Here we show a new computational framework for real-time three-dimensional (3D) scene reconstruction from single-photon data. By combining statistical models with highly scalable computational tools from the computer graphics community, we demonstrate 3D reconstruction of complex outdoor scenes with processing times of the order of 20 ms, where the lidar data was acquired in broad daylight from distances up to 320 metres. The proposed method can handle an unknown number of surfaces in each pixel, allowing for target detection and imaging through cluttered scenes. This enables robust, real-time target reconstruction of complex moving scenes, paving the way for single-photon lidar at video rates for practical 3D imaging applications. △ Less

Submitted 4 October, 2019; v1 submitted 16 May, 2019; originally announced May 2019.

Long-range depth imaging using a single-photon detector array and non-local data fusion

Authors: Susan Chan, Abderrahim Halimi, Feng Zhu, Istvan Gyongy, Robert K. Henderson, Richard Bowman, Steve McLaughlin, Gerald S. Buller, Jonathan Leach

Abstract: The ability to measure and record high-resolution depth images at long stand-off distances is important for a wide range of applications, including connected and automotive vehicles, defense and security, and agriculture and mining. In LIDAR (light detection and ranging) applications, single-photon sensitive detection is an emerging approach, offering high sensitivity to light and picosecond tempo… ▽ More The ability to measure and record high-resolution depth images at long stand-off distances is important for a wide range of applications, including connected and automotive vehicles, defense and security, and agriculture and mining. In LIDAR (light detection and ranging) applications, single-photon sensitive detection is an emerging approach, offering high sensitivity to light and picosecond temporal resolution, and consequently excellent surface-to-surface resolution. The use of large format CMOS single-photon detector arrays provides high spatial resolution and allows the timing information to be acquired simultaneously across many pixels. In this work, we combine state-of-the-art single-photon detector array technology with non-local data fusion to generate high resolution three-dimensional depth information of long-range targets. The system is based on a visible pulsed illumination system at 670~nm and a 240~$\times$ 320 pixel array sensor, achieving sub-centimeter precision in all three spatial dimensions at a distance of 150 meters. The non-local data fusion combines information from an optical image with sparse sampling of the single-photon array data, providing accurate depth information at low signature regions of the target. △ Less

Submitted 11 December, 2018; originally announced December 2018.

Bayesian 3D Reconstruction of Complex Scenes from Single-Photon Lidar Data

Authors: Julián Tachella, Yoann Altmann, Ximing Ren, Aongus McCarthy, Gerald S. Buller, Jean-Yves Tourneret, Steve McLaughlin

Abstract: Light detection and ranging (Lidar) data can be used to capture the depth and intensity profile of a 3D scene. This modality relies on constructing, for each pixel, a histogram of time delays between emitted light pulses and detected photon arrivals. In a general setting, more than one surface can be observed in a single pixel. The problem of estimating the number of surfaces, their reflectivity a… ▽ More Light detection and ranging (Lidar) data can be used to capture the depth and intensity profile of a 3D scene. This modality relies on constructing, for each pixel, a histogram of time delays between emitted light pulses and detected photon arrivals. In a general setting, more than one surface can be observed in a single pixel. The problem of estimating the number of surfaces, their reflectivity and position becomes very challenging in the low-photon regime (which equates to short acquisition times) or relatively high background levels (i.e., strong ambient illumination). This paper presents a new approach to 3D reconstruction using single-photon, single-wavelength Lidar data, which is capable of identifying multiple surfaces in each pixel. Adopting a Bayesian approach, the 3D structure to be recovered is modelled as a marked point process and reversible jump Markov chain Monte Carlo (RJ-MCMC) moves are proposed to sample the posterior distribution of interest. In order to promote spatial correlation between points belonging to the same surface, we propose a prior that combines an area interaction process and a Strauss process. New RJ-MCMC dilation and erosion updates are presented to achieve an efficient exploration of the configuration space. To further reduce the computational load, we adopt a multiresolution approach, processing the data from a coarse to the finest scale. The experiments performed with synthetic and real data show that the algorithm obtains better reconstructions than other recently published optimization algorithms for lower execution times. △ Less

Submitted 27 October, 2018; originally announced October 2018.

Journal ref: SIAM Journal on Imaging Sciences 2019 12:1, 521-550

Robust spectral unmixing of sparse multispectral Lidar waveforms using gamma Markov random fields

Authors: Yoann Altmann, Aurora Maccarone, Aongus McCarthy, Gregory Newstadt, Gerald S. Buller, Steve McLaughlin, Alfred Hero

Abstract: This paper presents a new Bayesian spectral unmixing algorithm to analyse remote scenes sensed via sparse multispectral Lidar measurements. To a first approximation, in the presence of a target, each Lidar waveform consists of a main peak, whose position depends on the target distance and whose amplitude depends on the wavelength of the laser source considered (i.e, on the target reflectivity). Be… ▽ More This paper presents a new Bayesian spectral unmixing algorithm to analyse remote scenes sensed via sparse multispectral Lidar measurements. To a first approximation, in the presence of a target, each Lidar waveform consists of a main peak, whose position depends on the target distance and whose amplitude depends on the wavelength of the laser source considered (i.e, on the target reflectivity). Besides, these temporal responses are usually assumed to be corrupted by Poisson noise in the low photon count regime. When considering multiple wavelengths, it becomes possible to use spectral information in order to identify and quantify the main materials in the scene, in addition to estimation of the Lidar-based range profiles. Due to its anomaly detection capability, the proposed hierarchical Bayesian model, coupled with an efficient Markov chain Monte Carlo algorithm, allows robust estimation of depth images together with abundance and outlier maps associated with the observed 3D scene. The proposed methodology is illustrated via experiments conducted with real multispectral Lidar data acquired in a controlled environment. The results demonstrate the possibility to unmix spectral responses constructed from extremely sparse photon counts (less than 10 photons per pixel and band). △ Less

Submitted 13 June, 2017; v1 submitted 13 October, 2016; originally announced October 2016.

Object Depth Profile and Reflectivity Restoration from Sparse Single-Photon Data Acquired in Underwater Environments

Authors: Abderrahim Halimi, Aurora Maccarone, Aongus McCarthy, Steve McLaughlin, Gerald S. Buller

Abstract: This paper presents two new algorithms for the joint restoration of depth and reflectivity (DR) images constructed from time-correlated single-photon counting (TCSPC) measurements. Two extreme cases are considered: (i) a reduced acquisition time that leads to very low photon counts and (ii) a highly attenuating environment (such as a turbid medium) which makes the reflectivity estimation more diff… ▽ More This paper presents two new algorithms for the joint restoration of depth and reflectivity (DR) images constructed from time-correlated single-photon counting (TCSPC) measurements. Two extreme cases are considered: (i) a reduced acquisition time that leads to very low photon counts and (ii) a highly attenuating environment (such as a turbid medium) which makes the reflectivity estimation more difficult at increasing range. Adopting a Bayesian approach, the Poisson distributed observations are combined with prior distributions about the parameters of interest, to build the joint posterior distribution. More precisely, two Markov random field (MRF) priors enforcing spatial correlations are assigned to the DR images. Under some justified assumptions, the restoration problem (regularized likelihood) reduces to a convex formulation with respect to each of the parameters of interest. This problem is first solved using an adaptive Markov chain Monte Carlo (MCMC) algorithm that approximates the minimum mean square parameter estimators. This algorithm is fully automatic since it adjusts the parameters of the MRFs by maximum marginal likelihood estimation. However, the MCMC-based algorithm exhibits a relatively long computational time. The second algorithm deals with this issue and is based on a coordinate descent algorithm. Results on single-photon depth data from laboratory based underwater measurements demonstrate the benefit of the proposed strategy that improves the quality of the estimated DR images. △ Less

Submitted 22 August, 2016; originally announced August 2016.

Experimental transmission of quantum digital signatures over 90-km of installed optical fiber using a differential phase shift quantum key distribution system

Authors: Robert J. Collins, Ryan Amiri, Mikio Fujiwara, Toshimori Honjo, Kaoru Shimizu, Kiyoshi Tamaki, Masahiro Takeoka, Erika Andersson, Gerald S. Buller, Masahide Sasaki

Abstract: Quantum digital signatures apply quantum mechanics to the problem of guaranteeing message integrity and non-repudiation with information-theoretical security, which are complementary to the confidentiality realized by quantum key distribution. Previous experimental demonstrations have been limited to transmission distances of less than 5-km of optical fiber in a laboratory setting. Here we report… ▽ More Quantum digital signatures apply quantum mechanics to the problem of guaranteeing message integrity and non-repudiation with information-theoretical security, which are complementary to the confidentiality realized by quantum key distribution. Previous experimental demonstrations have been limited to transmission distances of less than 5-km of optical fiber in a laboratory setting. Here we report the first demonstration of quantum digital signatures over installed optical fiber as well as the longest transmission link reported to date. This demonstration used a 90-km long differential phase shift quantum key distribution system to achieve approximately one signed bit per second - an increase in the signature generation rate of several orders of magnitude over previous optical fiber demonstrations. △ Less

Submitted 15 August, 2016; originally announced August 2016.

Journal ref: Optics Letters 41(21), 4883-4886 (2016)

Fast Hyperspectral Unmixing in Presence of Nonlinearity or Mismodelling Effects

Authors: Abderrahim Halimi, Jose Bioucas-Dias, Nicolas Dobigeon, Gerald S. Buller, Steve McLaughlin

Abstract: This paper presents two novel hyperspectral mixture models and associated unmixing algorithms. The two models assume a linear mixing model corrupted by an additive term whose expression can be adapted to account for multiple scattering nonlinearities (NL), or mismodelling effects (ME). The NL model generalizes bilinear models by taking into account higher order interaction terms. The ME model acco… ▽ More This paper presents two novel hyperspectral mixture models and associated unmixing algorithms. The two models assume a linear mixing model corrupted by an additive term whose expression can be adapted to account for multiple scattering nonlinearities (NL), or mismodelling effects (ME). The NL model generalizes bilinear models by taking into account higher order interaction terms. The ME model accounts for different effects such as endmember variability or the presence of outliers. The abundance and residual parameters of these models are estimated by considering a convex formulation suitable for fast estimation algorithms. This formulation accounts for constraints such as the sum-to-one and non-negativity of the abundances, the non-negativity of the nonlinearity coefficients, the spectral smoothness of the ME terms and the spatial sparseness of the residuals. The resulting convex problem is solved using the alternating direction method of multipliers (ADMM) whose convergence is ensured theoretically. The proposed mixture models and their unmixing algorithms are validated on both synthetic and real images showing competitive results regarding the quality of the inference and the computational complexity when compared to the state-of-the-art algorithms. △ Less

Submitted 18 July, 2016; originally announced July 2016.

Detection-dependent six-photon NOON state interference

Authors: Rui-Bo Jin, Mikio Fujiwara, Ryosuke Shimizu, Robert J. Collins, Gerald S. Buller, Taro Yamashita, Shigehito Miki, Hirotaka Terai, Masahiro Takeoka, Masahide Sasaki

Abstract: NOON state interference (NOON-SI) is a powerful tool to improve the phase sensing precision, and can play an important role in quantum sensing and quantum imaging. However, most of the previous NOON-SI experiments only investigated the center part of the interference pattern, while the full range of the NOON-SI pattern has not yet been well explored.In this Letter, we experimentally and theoretica… ▽ More NOON state interference (NOON-SI) is a powerful tool to improve the phase sensing precision, and can play an important role in quantum sensing and quantum imaging. However, most of the previous NOON-SI experiments only investigated the center part of the interference pattern, while the full range of the NOON-SI pattern has not yet been well explored.In this Letter, we experimentally and theoretically demonstrate up to six-photon NOON-SI and study the properties of the interference patterns over the full range.The multi-photons were generated at a wavelength of 1584 nm from a PPKTP crystal in a parametric down conversion process.It was found that the shape, the coherence time and the visibility of the interference patterns were strongly dependent on the detection schemes.This experiment can be used for applications which are based on the envelope of the NOON-SI pattern, such as quantum spectroscopy and quantum metrology. △ Less

Submitted 4 July, 2016; originally announced July 2016.

Comments: 5 pages, 3 figures

Journal ref: Sci. Rep. 6, 36914 (2016)

Bayesian Filtering of Smooth Signals: Application to Altimetry

Authors: Abderrahim Halimi, Gerald S. Buller, Steve McLaughlin, Paul Honeine

Abstract: This paper presents a novel Bayesian strategy for the estimation of smooth signals corrupted by Gaussian noise. The method assumes a smooth evolution of a succession of continuous signals that can have a numerical or an analytical expression with respect to some parameters. The Bayesian model proposed takes into account the Gaussian properties of the noise and the smooth evolution of the successiv… ▽ More This paper presents a novel Bayesian strategy for the estimation of smooth signals corrupted by Gaussian noise. The method assumes a smooth evolution of a succession of continuous signals that can have a numerical or an analytical expression with respect to some parameters. The Bayesian model proposed takes into account the Gaussian properties of the noise and the smooth evolution of the successive signals. In addition, a gamma Markov random field prior is assigned to the signal energies and to the noise variances to account for their known properties. The resulting posterior distribution is maximized using a fast coordinate descent algorithm whose parameters are updated by analytical expressions. The proposed algorithm is tested on satellite altimetric data demonstrating good denoising results on both synthetic and real signals. The proposed algorithm is also shown to improve the quality of the altimetric parameters when combined with a parameter estimation strategy. △ Less

Submitted 11 February, 2016; originally announced February 2016.

Comments: 7 figures

Robust Bayesian target detection algorithm for depth imaging from sparse single-photon data

Authors: Yoann Altmann, Ximing Ren, Aongus McCarthy, Gerald S. Buller, Steve McLaughlin

Abstract: This paper presents a new Bayesian model and associated algorithm for depth and intensity profiling using full waveforms from time-correlated single-photon counting (TCSPC) measurements in the limit of very low photon counts (i.e., typically less than 20 photons per pixel). The model represents each Lidar waveform as an unknown constant background level, which is combined in the presence of a targ… ▽ More This paper presents a new Bayesian model and associated algorithm for depth and intensity profiling using full waveforms from time-correlated single-photon counting (TCSPC) measurements in the limit of very low photon counts (i.e., typically less than 20 photons per pixel). The model represents each Lidar waveform as an unknown constant background level, which is combined in the presence of a target, to a known impulse response weighted by the target intensity and finally corrupted by Poisson noise. The joint target detection and depth imaging problem is expressed as a pixel-wise model selection and estimation problem which is solved using Bayesian inference. Prior knowledge about the problem is embedded in a hierarchical model that describes the dependence structure between the model parameters while accounting for their constraints. In particular, Markov random fields (MRFs) are used to model the joint distribution of the background levels and of the target presence labels, which are both expected to exhibit significant spatial correlations. An adaptive Markov chain Monte Carlo algorithm including reversible-jump updates is then proposed to compute the Bayesian estimates of interest. This algorithm is equipped with a stochastic optimization adaptation mechanism that automatically adjusts the parameters of the MRFs by maximum marginal likelihood estimation. Finally, the benefits of the proposed methodology are demonstrated through a series of experiments using real data. △ Less

Submitted 13 October, 2016; v1 submitted 21 January, 2016; originally announced January 2016.

Comments: arXiv admin note: text overlap with arXiv:1507.02511

Experimental demonstration of kilometer-range quantum digital signatures

Authors: Ross James Donaldson, Robert John Collins, Klaudia Kleczkowska, Ryan Amiri, Petros Wallden, Vedran Dunjko, John Jeffers, Erika Andersson, Gerald Stuart Buller

Abstract: We present an experimental realization of a quantum digital signature protocol which, together with a standard quantum key distribution link, increases transmission distance to kilometre ranges, three orders of magnitude larger than in previous realizations. The bit-rate is also significantly increased compared with previous quantum signature demonstrations. This work illustrates that quantum digi… ▽ More We present an experimental realization of a quantum digital signature protocol which, together with a standard quantum key distribution link, increases transmission distance to kilometre ranges, three orders of magnitude larger than in previous realizations. The bit-rate is also significantly increased compared with previous quantum signature demonstrations. This work illustrates that quantum digital signatures can be realized with optical components similar to those used for quantum key distribution, and could be implemented in existing optical fiber networks. △ Less

Submitted 25 September, 2015; originally announced September 2015.

Journal ref: Phys. Rev. A 93, 012329 (2016)

Lidar waveform based analysis of depth images constructed using sparse single-photon data

Authors: Yoann Altmann, Ximing Ren, Aongus McCarthy, Gerald S. Buller, Steve McLaughlin

Abstract: This paper presents a new Bayesian model and algorithm used for depth and intensity profiling using full waveforms from the time-correlated single photon counting (TCSPC) measurement in the limit of very low photon counts. The model proposed represents each Lidar waveform as a combination of a known impulse response, weighted by the target intensity, and an unknown constant background, corrupted b… ▽ More This paper presents a new Bayesian model and algorithm used for depth and intensity profiling using full waveforms from the time-correlated single photon counting (TCSPC) measurement in the limit of very low photon counts. The model proposed represents each Lidar waveform as a combination of a known impulse response, weighted by the target intensity, and an unknown constant background, corrupted by Poisson noise. Prior knowledge about the problem is embedded in a hierarchical model that describes the dependence structure between the model parameters and their constraints. In particular, a gamma Markov random field (MRF) is used to model the joint distribution of the target intensity, and a second MRF is used to model the distribution of the target depth, which are both expected to exhibit significant spatial correlations. An adaptive Markov chain Monte Carlo algorithm is then proposed to compute the Bayesian estimates of interest and perform Bayesian inference. This algorithm is equipped with a stochastic optimization adaptation mechanism that automatically adjusts the parameters of the MRFs by maximum marginal likelihood estimation. Finally, the benefits of the proposed methodology are demonstrated through a serie of experiments using real data. △ Less

Submitted 9 July, 2015; originally announced July 2015.

Experimental Implementation of a Quantum Optical State Comparison Amplifier

Authors: Ross J. Donaldson, Robert J. Collins, Electra Eleftheriadou, Stephen M. Barnett, John Jeffers, Gerald S. Buller

Abstract: Quantum optical amplification that beats the noise addition limit for deterministic amplifiers has been realized experimentally using several different nondeterministic protocols. These schemes either require single-photon sources, or operate by noise addition and photon subtraction. Here we present an experimental demonstration of a protocol that allows nondeterministic amplification of known set… ▽ More Quantum optical amplification that beats the noise addition limit for deterministic amplifiers has been realized experimentally using several different nondeterministic protocols. These schemes either require single-photon sources, or operate by noise addition and photon subtraction. Here we present an experimental demonstration of a protocol that allows nondeterministic amplification of known sets of coherent states with high gain and high fidelity. The experimental system employs the two mature quantum optical technologies of state comparison and photon subtraction and does not rely on elaborate quantum resources such as single-photon sources. The use of coherent states rather than single photons allows for an increased rate of amplification and a less complex photon source. Furthermore it means that the amplification is not restricted to low amplitude states. With respect to the two key parameters, fidelity and amplified state production rate, we demonstrate, without the use of quantum resources, significant improvements over previous experimental implementations. △ Less

Submitted 16 April, 2014; originally announced April 2014.

Comments: 21 pages, 4 figures

Journal ref: Phys. Rev. Lett. 114, 120505 (2015)

Realization of Quantum Digital Signatures without the requirement of quantum memory

Authors: Robert J. Collins, Ross J. Donaldson, Vedran Dunjko, Petros Wallden, Patrick J. Clarke, Erika Andersson, John Jeffers, Gerald S. Buller

Abstract: Digital signatures are widely used to provide security for electronic communications, for example in financial transactions and electronic mail. Currently used classical digital signature schemes, however, only offer security relying on unproven computational assumptions. In contrast, quantum digital signatures (QDS) offer information-theoretic security based on laws of quantum mechanics (e.g. Got… ▽ More Digital signatures are widely used to provide security for electronic communications, for example in financial transactions and electronic mail. Currently used classical digital signature schemes, however, only offer security relying on unproven computational assumptions. In contrast, quantum digital signatures (QDS) offer information-theoretic security based on laws of quantum mechanics (e.g. Gottesman and Chuang 2001). Here, security against forging relies on the impossibility of perfectly distinguishing between non-orthogonal quantum states. A serious drawback of previous QDS schemes is however that they require long-term quantum memory, making them unfeasible in practice. We present the first realisation of a scheme (Dunjko et al 2013) that does not need quantum memory, and which also uses only standard linear optical components and photodetectors. To achieve this, the recipients measure the distributed quantum signature states using a new type of quantum measurement, quantum state elimination (e.g. Barnett 2009, Bandyopadhyay et al 2013). This significantly advances QDS as a quantum technology with potential for real applications. △ Less

Submitted 14 May, 2014; v1 submitted 22 November, 2013; originally announced November 2013.

Comments: 18 pages, 4 figures. Vesrion accepted in PRL. In v3 small change of title and substancial rewriting of parts of the paper following suggestion of referee. Part of the security analysis included in the appendix (supplementary material) for completeness, is similar to the one in our earlier paper arXiv:1309.1375, since it uses similar methods applied to a different setting

Journal ref: Phys. Rev. Lett. 113, 040502 (2014)

Experimental demonstration of quantum digital signatures using phase-encoded coherent states of light

Authors: Patrick J. Clarke, Robert J. Collins, Vedran Dunjko, Erika Andersson, John Jeffers, Gerald S. Buller

Abstract: Digital signatures are frequently used in data transfer to prevent impersonation, repudiation and message tampering. Currently used classical digital signature schemes rely on public key encryption techniques, where the complexity of so-called "one-way" mathematical functions is used to provide security over sufficiently long timescales. No mathematical proofs are known for the long-term security… ▽ More Digital signatures are frequently used in data transfer to prevent impersonation, repudiation and message tampering. Currently used classical digital signature schemes rely on public key encryption techniques, where the complexity of so-called "one-way" mathematical functions is used to provide security over sufficiently long timescales. No mathematical proofs are known for the long-term security of such techniques. Quantum digital signatures offer a means of sending a message which cannot be forged or repudiated, with security verified by information-theoretical limits and quantum mechanics. Here we demonstrate an experimental system which distributes quantum signatures from one sender to two receivers and enables message sending ensured against forging and repudiation. Additionally, we analyse the security of the system in some typical scenarios. The system is based on the interference of phase encoded coherent states of light and our implementation utilises polarisation maintaining optical fibre and photons with a wavelength of 850 nm. △ Less

Submitted 4 June, 2013; originally announced June 2013.

Comments: Final version submitted for publication. Some slight changes were made to the structure of the text and figures before publication. Includes Supplementary Information

Journal ref: Nat. Commun. 3:1174 (2012)

Optimising the use of detector arrays for measuring intensity correlations of photon pairs

Authors: Daniel S. Tasca, Matthew P. Edgar, Frauke Izdebski, Gerald S. Buller, Miles J. Padgett

Abstract: Intensity correlation measurements form the basis of many experiments based on spontaneous parametric down-conversion. In the most common situation, two single-photon avalanche diodes and coincidence electronics are used in the detection of the photon pairs, and the coincidence count distributions are measured by making use of some scanning procedure. Here we analyse the measurement of intensity c… ▽ More Intensity correlation measurements form the basis of many experiments based on spontaneous parametric down-conversion. In the most common situation, two single-photon avalanche diodes and coincidence electronics are used in the detection of the photon pairs, and the coincidence count distributions are measured by making use of some scanning procedure. Here we analyse the measurement of intensity correlations using multi-element detector arrays. By considering the detector parameters such as the detection and noise probabilities, we found that the mean number of detected photons that maximises the visibility of the two photon correlations is approximately equal to the mean number of noise events in the detector array. We provide expressions predicting the strength of the measured intensity correlations as a function of the detector parameters and on the mean number of detected photons. We experimentally test our predictions by measuring far-field intensity correlations of spontaneous parametric down-conversion with an electron multiplying CCD camera, finding excellent agreement with the theoretical analysis. △ Less

Submitted 12 July, 2013; v1 submitted 29 May, 2013; originally announced May 2013.

Comments: Some typos corrected, references added. 12 pages, 5 figures, revtex4; comments welcome

Journal ref: Phys. Rev. A 88, 013816 (2013)

Singlet oxygen luminescence detection with a fiber-coupled superconducting nanowire single-photon detector

Authors: Nathan R. Gemmell, Aongus McCarthy, Baochang Liu, Michael G. Tanner, Sander N. Dorenbos, Valery Zwiller, Michael S. Patterson, Gerald S. Buller, Brian C. Wilson, Robert H. Hadfield

Abstract: Direct monitoring of singlet oxygen (1O2) luminescence is a particularly challenging infrared photodetection problem. 1O2, an excited state of the oxygen molecule, is a crucial intermediate in many biological processes. We employ a low noise superconducting nanowire single-photon detector to record 1O2 luminescence at 1270 nm wavelength from a model photosensitizer (Rose Bengal) in solution. Narro… ▽ More Direct monitoring of singlet oxygen (1O2) luminescence is a particularly challenging infrared photodetection problem. 1O2, an excited state of the oxygen molecule, is a crucial intermediate in many biological processes. We employ a low noise superconducting nanowire single-photon detector to record 1O2 luminescence at 1270 nm wavelength from a model photosensitizer (Rose Bengal) in solution. Narrow band spectral filtering and chemical quenching is used to verify the 1O2 signal, and lifetime evolution with the addition of protein is studied. Furthermore, we demonstrate the detection of 1O2 luminescence through a single optical fiber, a marked advance for dose monitoring in clinical treatments such as photodynamic therapy. △ Less

Submitted 26 February, 2013; originally announced February 2013.

Comments: 11 pages, 4 figures

Journal ref: Optics Express, Vol. 21, Issue 4, pp. 5005-5013 (2013)

Imaging high-dimensional spatial entanglement with a camera

Authors: Matthew P. Edgar, Daniel S. Tasca, Frauke Izdebski, Ryan E. Warburton, Jonathan Leach, Megan Agnew, Gerald S. Buller, Robert W. Boyd, Miles J. Padgett

Abstract: The light produced by parametric down-conversion shows strong spatial entanglement that leads to violations of EPR criteria for separability. Historically, such studies have been performed by scanning a single-element, single-photon detector across a detection plane. Here we show that modern electron-multiplying charge-coupled device cameras can measure correlations in both position and momentum a… ▽ More The light produced by parametric down-conversion shows strong spatial entanglement that leads to violations of EPR criteria for separability. Historically, such studies have been performed by scanning a single-element, single-photon detector across a detection plane. Here we show that modern electron-multiplying charge-coupled device cameras can measure correlations in both position and momentum across a multi-pixel field of view. This capability allows us to observe entanglement of around 2,500 spatial states and demonstrate Einstein-Podolsky-Rosen type correlations by more than two orders of magnitude. More generally, our work shows that cameras can lead to important new capabilities in quantum optics and quantum information science. △ Less

Submitted 9 August, 2012; v1 submitted 5 April, 2012; originally announced April 2012.

Comments: 5 pages, 4 figures

Journal ref: Nat. Commun. 3:984 (2012)

Experimental high-dimensional two-photon entanglement and violations of generalised Bell inequalities

Authors: Adetunmise C. Dada, Jonathan Leach, Gerald S. Buller, Miles J. Padgett, Erika Andersson

Abstract: Quantum entanglement plays a vital role in many quantum information and communication tasks. Entangled states of higher dimensional systems are of great interest due to the extended possibilities they provide. For example, they allow the realisation of new types of quantum information schemes that can offer higher information-density coding and greater resilience to errors than can be achieved wit… ▽ More Quantum entanglement plays a vital role in many quantum information and communication tasks. Entangled states of higher dimensional systems are of great interest due to the extended possibilities they provide. For example, they allow the realisation of new types of quantum information schemes that can offer higher information-density coding and greater resilience to errors than can be achieved with entangled two-dimensional systems. Closing the detection loophole in Bell test experiments is also more experimentally feasible when higher dimensional entangled systems are used. We have measured previously untested correlations between two photons to experimentally demonstrate high-dimensional entangled states. We obtain violations of Bell-type inequalities generalised to d-dimensional systems with up to d = 12. Furthermore, the violations are strong enough to indicate genuine 11-dimensional entanglement. Our experiments use photons entangled in orbital angular momentum (OAM), generated through spontaneous parametric down-conversion (SPDC), and manipulated using computer controlled holograms. △ Less

Submitted 19 December, 2011; v1 submitted 27 April, 2011; originally announced April 2011.

Journal ref: Nature Physics 7, 677-680 (2011)

Quantum key distribution system in standard telecommunications fiber using a short wavelength single-photon source

Authors: R. J. Collins, P. J. Clarke, V. Fernandez, K. J. Gordon, M. N. Makhonin, J. A. Timpson, A. Tahraoui, M. Hopkinson, A. M. Fox, M. S. Skolnick, G. S. Buller

Abstract: A demonstration of the principles of quantum key distribution is performed using a single-photon source in a proof of concept test-bed over a distance of 2 km in standard telecommunications optical fiber. The single-photon source was an optically-pumped quantum dot in a microcavity emitting at a wavelength of 895 nm. Characterization of the quantum key distribution parameters was performed at a… ▽ More A demonstration of the principles of quantum key distribution is performed using a single-photon source in a proof of concept test-bed over a distance of 2 km in standard telecommunications optical fiber. The single-photon source was an optically-pumped quantum dot in a microcavity emitting at a wavelength of 895 nm. Characterization of the quantum key distribution parameters was performed at a range of different optical excitation powers. An investigation of the effect of varying the optical excitation power of the quantum dot microcavity on the quantum bit error rate and cryptographic key exchange rate of the system are presented. △ Less

Submitted 27 April, 2010; originally announced April 2010.

Comments: Final manuscript version, some grammatical differences from the published version. 26 pages including 7 figures.

Journal ref: Journal of Applied Physics, Volume 107, Number 7, Article Number 073102 (2010)

Low Timing Jitter Detector for Gigahertz Quantum Key Distribution

Authors: R. J. Collins, R. H. Hadfield, V. Fernandez, S. W. Nam, G. S. Buller

Abstract: A superconducting single-photon detector based on a niobium nitride nanowire is demonstrated in an optical-fibre-based quantum key distribution test bed operating at a clock rate of 3.3 GHz and a transmission wavelength of 850 nm. The low jitter of the detector leads to significant reduction in the estimated quantum bit error rate and a resultant improvement in the secrecy efficiency compared to… ▽ More A superconducting single-photon detector based on a niobium nitride nanowire is demonstrated in an optical-fibre-based quantum key distribution test bed operating at a clock rate of 3.3 GHz and a transmission wavelength of 850 nm. The low jitter of the detector leads to significant reduction in the estimated quantum bit error rate and a resultant improvement in the secrecy efficiency compared to previous estimates made by use of silicon single-photon avalanche detectors. △ Less

Submitted 23 February, 2007; originally announced February 2007.

Comments: 11 pages, including 2 figures

Journal ref: Electronics Letters, 43 (3), pp 180-182 (2007)

Passive Optical Network Approach to GigaHertz-Clocked Multiuser Quantum Key Distribution

Authors: Veronica Fernandez, Robert J. Collins, Karen J. Gordon, Paul D. Townsend, Gerald S. Buller

Abstract: We present the application of quantum key distribution technologies to fiber-based broadband passive optical access networks. This application is based on our 850 nm wavelength gigahertz clock-rate single-receiver system, is compatible with existing telecommunications fiber and exploits a wavelength band not currently utilized in access networks. The developed quantum key distribution networks a… ▽ More We present the application of quantum key distribution technologies to fiber-based broadband passive optical access networks. This application is based on our 850 nm wavelength gigahertz clock-rate single-receiver system, is compatible with existing telecommunications fiber and exploits a wavelength band not currently utilized in access networks. The developed quantum key distribution networks are capable of transmitting over distances consistent with the span of access links for metropolitan networks (10 km), at clock frequencies ranging up to 3 GHz. △ Less

Submitted 15 December, 2006; originally announced December 2006.

Comments: 9 pages, PDF only

Journal ref: IEEE Journal of Quantum Electronics, Volume 43 (2), (2007)

A Short Wavelength GigaHertz Clocked Fiber-Optic Quantum Key Distribution System

Authors: Karen J. Gordon, Veronica Fernandez, Paul D. Townsend, Gerald S. Buller

Abstract: A quantum key distribution system has been developed, using standard telecommunications optical fiber, which is capable of operating at clock rates of greater than 1 GHz. The quantum key distribution system implements a polarization encoded version of the B92 protocol. The system employs vertical-cavity surface-emitting lasers with emission wavelengths of 850 nm as weak coherent light sources, a… ▽ More A quantum key distribution system has been developed, using standard telecommunications optical fiber, which is capable of operating at clock rates of greater than 1 GHz. The quantum key distribution system implements a polarization encoded version of the B92 protocol. The system employs vertical-cavity surface-emitting lasers with emission wavelengths of 850 nm as weak coherent light sources, and silicon single photon avalanche diodes as the single photon detectors. A distributed feedback laser of emission wavelength 1.3 micro-metres, and a linear gain germanium avalanche photodiode was used to optically synchronize individual photons over the standard telecommunications fiber. The quantum key distribution system exhibited a quantum bit error rate of 1.4%, and an estimated net bit rate greater than 100,000 bits-per-second for a 4.2 km transmission range. For a 10 km fiber range a quantum bit error rate of 2.1%, and estimated net bit rate of greater than 7,000 bits-per-second was achieved. △ Less

Submitted 26 May, 2006; originally announced May 2006.

Comments: Pre-press version

Journal ref: IEEE Journal of Quantum Electronics, Volume 40 (7), pp900-908 (2004)

Quantum key distribution system clocked at 2 GHz

Authors: K. J. Gordon, V. Fernandez, G. S. Buller, I. Rech, S. D. Cova, P. D. Townsend

Abstract: An improved quantum key distribution test system operating at clock rates of up to 2GHz using a specially adapted commercially available silicon single photon avalanche diode is presented. The use of improved detectors has improved the fibre-based test system performance in terms of transmission distance and quantum bit error rate. An improved quantum key distribution test system operating at clock rates of up to 2GHz using a specially adapted commercially available silicon single photon avalanche diode is presented. The use of improved detectors has improved the fibre-based test system performance in terms of transmission distance and quantum bit error rate. △ Less

Submitted 8 May, 2006; originally announced May 2006.

Journal ref: Optics Express, Volume13 (8), pp3015-3020 (2005)

3.3 Gigahertz Clocked Quantum Key Distribution System

Authors: Karen J. Gordon, Veronica Fernandez, Robert J. Collins, Ivan Rech, Sergio D. Cova, Paul D. Townsend, Gerald S. Buller

Abstract: A fibre-based quantum key distribution system operating up to a clock frequency of 3.3GHz is presented. The system demonstrates significantly increased key exchange rate potential and operates at a wavelength of 850nm. A fibre-based quantum key distribution system operating up to a clock frequency of 3.3GHz is presented. The system demonstrates significantly increased key exchange rate potential and operates at a wavelength of 850nm. △ Less

Submitted 5 May, 2006; originally announced May 2006.

Comments: Presented at ECOC 05, Glasgow, UK, (September 2005)

Quantum Key Distribution in a Multi-User Network at Gigahertz Clock rates

Authors: Veronica Fernandez, Karen J. Gordon, Robert J. Collins, Paul D. Townsend, Sergio D. Cova, Ivan Rech, Gerald S. Buller

Abstract: In recent years quantum information research has lead to the discovery of a number of remarkable new paradigms for information processing and communication. These developments include quantum cryptography schemes that offer unconditionally secure information transport guaranteed by quantum-mechanical laws. Such potentially disruptive security technologies could be of high strategic and economic… ▽ More In recent years quantum information research has lead to the discovery of a number of remarkable new paradigms for information processing and communication. These developments include quantum cryptography schemes that offer unconditionally secure information transport guaranteed by quantum-mechanical laws. Such potentially disruptive security technologies could be of high strategic and economic value in the future. Two major issues confronting researchers in this field are the transmission range (typically <100km) and the key exchange rate, which can be as low as a few bits per second at long optical fiber distances. This paper describes further research of an approach to significantly enhance the key exchange rate in an optical fiber system at distances in the range of 1-20km. We will present results on a number of application scenarios, including point-to-point links and multi-user networks. Quantum key distribution systems have been developed, which use standard telecommunications optical fiber, and which are capable of operating at clock rates of up to 2GHz. They implement a polarization-encoded version of the B92 protocol and employ vertical-cavity surface-emitting lasers with emission wavelengths of 850 nm as weak coherent light sources, as well as silicon single-photon avalanche diodes as the single photon detectors. The point-to-point quantum key distribution system exhibited a quantum bit error rate of 1.4%, and an estimated net bit rate greater than 100,000 bits- per second for a 4.2 km transmission range. △ Less

Submitted 5 May, 2006; originally announced May 2006.

Comments: Presented at SPIE Symposium on Microtechnologies for the New Millennium, Sevilla, Spain (May 2005)

Journal ref: Proceedings of SPIE, Volume 5840, "Photonic Materials, Devices, and Applications", (2005)

Gigahertz Clocked Quantum Key Distribution in Passive Optical Networks

Authors: Veronica Fernandez, Robert J. Collins, Karen J. Gordon, Paul D. Townsend, Gerald S. Buller

Abstract: Two multi-user approaches to fiber-based quantum key distribution systems operating at gigahertz clock frequencies are presented, both compatible with standard telecommunications fiber. Two multi-user approaches to fiber-based quantum key distribution systems operating at gigahertz clock frequencies are presented, both compatible with standard telecommunications fiber. △ Less

Submitted 4 May, 2006; originally announced May 2006.

Comments: IEEE LEOS Summer Topical 2006 - Quantum Communications in Telecom Networks - July 17-19 2006 - Quebec City, Canada

Design and Performance of an InGaAs-InP Single-Photon Avalanche Diode Detector

Authors: Sara Pellegrini, Ryan E. Warburton, Lionel J. J. Tan, Jo Shien Ng, Andrey B. Krysa, Kristian Groom, John P. R. David, Sergio Cova, Michael J. Robertson, Gerald S. Buller

Abstract: This paper describes the design, fabrication, and performance of planar-geometry InGaAs-InP devices which were specifically developed for single-photon detection at a wavelength of 1550 nm. General performance issues such as dark count rate, single-photon detection efficiency, afterpulsing, and jitter are described. This paper describes the design, fabrication, and performance of planar-geometry InGaAs-InP devices which were specifically developed for single-photon detection at a wavelength of 1550 nm. General performance issues such as dark count rate, single-photon detection efficiency, afterpulsing, and jitter are described. △ Less

Submitted 3 May, 2006; originally announced May 2006.

Journal ref: IEEE Journal of Quantum Electronics, Volume 42 (4), pp397-403 (2006)

Design, fabrication and characterisation of InGaAs/InP single-photon avalanche diode detectors

Authors: Ryan E. Warburton, Sara Pellegrini, Lionel Tan, Jo Shien Ng, Andrey Krysa, Kris Groom, John P. R. David, Sergio Cova, Gerald S. Buller

Abstract: This paper demonstrates the performance of planar geometry InGaAs/InP avalanche diodes, specifically designed and fabricated for Geiger-mode operation at wavelengths around 1550nm, in terms of dark count rate, single-photon detection efficiency, afterpulsing and photon-timing jitter. This paper demonstrates the performance of planar geometry InGaAs/InP avalanche diodes, specifically designed and fabricated for Geiger-mode operation at wavelengths around 1550nm, in terms of dark count rate, single-photon detection efficiency, afterpulsing and photon-timing jitter. △ Less

Submitted 8 May, 2006; originally announced May 2006.

Comments: Presented at CLEO QELS, Long Beach, California (May 2006)