-
Waveguide QED at the onset of spin-spin correlations
Authors:
Sebastián Roca-Jerat,
Marcos Rubín-Osanz,
Mark D. Jenkins,
Agustín Camón,
Pablo J. Alonso,
David Zueco,
Fernando Luis
Abstract:
We experimentally explore the competition between light-mediated and direct matter-matter interactions in waveguide quantum electrodynamics. For this, we couple a superconducting line to a model magnetic material, made of organic free radical DPPH molecules with a spin $S=1/2$ and a $g_{S}$ factor very close to that of a free electron. The microwave transmission has been measured in a wide range o…
▽ More
We experimentally explore the competition between light-mediated and direct matter-matter interactions in waveguide quantum electrodynamics. For this, we couple a superconducting line to a model magnetic material, made of organic free radical DPPH molecules with a spin $S=1/2$ and a $g_{S}$ factor very close to that of a free electron. The microwave transmission has been measured in a wide range of temperatures ($0.013$ K $\leq T \leq 2$ K), magnetic fields ($0\leq B \leq 0.5$ T) and frequencies ($0 \leq ω/2 π\leq 14$ GHz). We find that molecules belonging to the crystal sublattice B form one-dimensional spin chains. Temperature then controls intrinsic spin correlations along the chain in a continuous and monotonic way. In the paramagnetic region ($T > 0.7$ K), the microwave transmission shows evidences for the collective coupling of quasi-identical spins to the propagating photons, with coupling strengths that reach values close to the dissipation rates. As $T$ decreases, the growth of intrinsic spin correlations, combined with the anisotropy in the spin-spin exchange constants, break down the collective spin-photon coupling. In this regime, the temperature dependence of the spin resonance visibility reflects the change in the nature of the dominant spin excitations, from single spin flips to bosonic magnons, which is brought about by the magnetic correlation growth.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
AC/DC characterization of a Ti/Au TES with Au/Bi absorber for X-ray detection
Authors:
E. Taralli,
C. Pobes,
P. Khosropanah,
L. Fabrega,
A. Camon,
L. Gottardi,
K. Nagayoshi,
M. Ridder,
M. Bruijn,
J. R. Gao
Abstract:
Transition-edge sensors (TESs) are used as very sensitive thermometers in microcalorimeters aimed at detection of different wavelengths. In particular, for soft X-ray astrophysics, science goals require very high resolution microcalorimeters which can be achieved with TESs coupled to suitable absorbers. For many applications there is also need for a high number of pixels which typically requires m…
▽ More
Transition-edge sensors (TESs) are used as very sensitive thermometers in microcalorimeters aimed at detection of different wavelengths. In particular, for soft X-ray astrophysics, science goals require very high resolution microcalorimeters which can be achieved with TESs coupled to suitable absorbers. For many applications there is also need for a high number of pixels which typically requires multiplexing in the readout stage. Frequency Domain Multiplexing (FDM) is a common scheme and is the baseline proposed for the ATHENA mission. FDM requires biasing the TES in AC at MHz frequencies. Recently there has been reported degradation in performances under AC with respect to DC bias. In order to assess the performances of TESs to be used with FDM, it is thus of great interest to compare the performances of the same device both under AC and DC bias. This requires two different measurement setups with different processes for making the characterization. We report in this work the preliminary results of a single pixel characterization performed on a TiAu TES under AC and afterwards under DC bias in different facilities. Extraction of dynamical parameters and noise performances are compared in both cases as a first stage for further AC/DC comparison of these devices.
△ Less
Submitted 18 February, 2021;
originally announced February 2021.
-
Broad-band spectroscopy of a vanadyl porphyrin: a model electronuclear spin qudit
Authors:
I. Gimeno,
A. Urtizberea,
J. Román-Roche,
D. Zueco,
A. Camón,
P. J. Alonso,
O. Roubeau,
F. Luis
Abstract:
We explore how to encode more than a qubit in vanadyl porphyrin molecules hosting a electronic spin 1/2 coupled to a nuclear spin 7/2. The spin Hamiltonian and its parameters, as well as the spin dynamics, have been determined via a combination of electron paramagnetic resonance, heat capacity, magnetization and on-chip magnetic spectroscopy experiments performed on single crystals. We find low te…
▽ More
We explore how to encode more than a qubit in vanadyl porphyrin molecules hosting a electronic spin 1/2 coupled to a nuclear spin 7/2. The spin Hamiltonian and its parameters, as well as the spin dynamics, have been determined via a combination of electron paramagnetic resonance, heat capacity, magnetization and on-chip magnetic spectroscopy experiments performed on single crystals. We find low temperature spin coherence times of micro-seconds and spin relaxation times longer than a second. For sufficiently strong magnetic fields (B larger than 0.1 T, corresponding to resonance frequencies of 9 to 10 GHz) these properties make vanadyl porphyrin molecules suitable qubit realizations. The presence of multiple equispaced nuclear spin levels then merely provides 8 alternatives to define the 0 and 1 basis states. For lower magnetic fields (below 0.1 T), and lower frequencies (smaller than 2 GHz), we find spectroscopic signatures of a sizeable electronuclear entanglement. This effect generates a larger set of allowed transitions between different electronuclear spin states and removes their degeneracies. Under these conditions, we show that each molecule fulfills the conditions to act as a universal 4-qubit processor or, equivalently, as a d = 16 qudit. These findings widen the catalogue of chemically designed systems able to implement non-trivial quantum functionalities, such as quantum simulations and, especially, quantum error correction at the molecular level.
△ Less
Submitted 27 January, 2021;
originally announced January 2021.
-
The Hot and Energetic Universe: The X-ray Integral Field Unit (X-IFU) for Athena+
Authors:
D. Barret,
J. W. den Herder,
L. Piro,
L. Ravera,
R. Den Hartog,
C. Macculi,
X. Barcons,
M. Page,
S. Paltani,
G. Rauw,
J. Wilms,
M. Ceballos,
L. Duband,
L. Gottardi,
S. Lotti,
J. de Plaa,
E. Pointecouteau,
C. Schmid,
H. Akamatsu,
D. Bagliani,
S. Bandler,
M. Barbera,
P. Bastia,
M. Biasotti,
M. Branco
, et al. (33 additional authors not shown)
Abstract:
The Athena+ mission concept is designed to implement the Hot and Energetic Universe science theme submitted to the European Space Agency in response to the call for White Papers for the definition of the L2 and L3 missions of its science program. The Athena+ science payload consists of a large aperture high angular resolution X-ray optics and twelve meters away, two interchangeable focal plane ins…
▽ More
The Athena+ mission concept is designed to implement the Hot and Energetic Universe science theme submitted to the European Space Agency in response to the call for White Papers for the definition of the L2 and L3 missions of its science program. The Athena+ science payload consists of a large aperture high angular resolution X-ray optics and twelve meters away, two interchangeable focal plane instruments: the X-ray Integral Field Unit (X-IFU) and the Wide Field Imager (WFI). The X-IFU is a cryogenic X-ray spectrometer, based on a large array of Transition Edge Sensors (TES), offering 2.5 eV spectral resolution, with ~5" pixels, over a field of view of 5 arc minutes in diameter. In this paper, we briefly describe the Athena+ mission concept and the X-IFU performance requirements. We then present the X-IFU detector and readout electronics principles, the current design of the focal plane assembly, the cooling chain and review the global architecture design. Finally, we describe the current performance estimates, in terms of effective area, particle background rejection, count rate capability and velocity measurements. Finally, we emphasize on the latest technology developments concerning TES array fabrication, spectral resolution and readout performance achieved to show that significant progresses are being accomplished towards the demanding X-IFU requirements.
△ Less
Submitted 30 August, 2013;
originally announced August 2013.
-
Molecular prototypes for spin-based CNOT quantum gates
Authors:
F. Luis,
A. Repollés,
M. J. Martínez-Pérez,
D. Aguilà,
O. Roubeau,
D. Zueco,
M. Evangelisti,
A. Camón,
J. Sesé,
L. A. Barrios,
G. Aromí
Abstract:
We show that a chemically engineered structural asymmetry in [Tb2] molecular clusters renders the two weakly coupled Tb3+ spin qubits magnetically inequivalent. The magnetic energy level spectrum of these molecules meets then all conditions needed to realize a universal CNOT quantum gate.
We show that a chemically engineered structural asymmetry in [Tb2] molecular clusters renders the two weakly coupled Tb3+ spin qubits magnetically inequivalent. The magnetic energy level spectrum of these molecules meets then all conditions needed to realize a universal CNOT quantum gate.
△ Less
Submitted 15 March, 2011;
originally announced March 2011.
