Showing 1–4 of 4 results for author: Cantrall, C

Measured Aperture-Array Noise Temperature of the Mark II Phased Array Feed for ASKAP

Authors: A. P. Chippendale, A. J. Brown, R. J. Beresford, G. A. Hampson, R. D. Shaw, D. B. Hayman, A. Macleod, A. R. Forsyth, S. G. Hay, M. Leach, C. Cantrall, M. L. Brothers, A. W. Hotan

Abstract: We have measured the aperture-array noise temperature of the first Mk. II phased array feed that CSIRO has built for the Australian Square Kilometre Array Pathfinder telescope. As an aperture array, the Mk. II phased array feed achieves a beam equivalent noise temperature less than 40 K from 0.78 GHz to 1.7 GHz and less than 50 K from 0.7 GHz to 1.8 GHz for a boresight beam directed at the zenith.… ▽ More We have measured the aperture-array noise temperature of the first Mk. II phased array feed that CSIRO has built for the Australian Square Kilometre Array Pathfinder telescope. As an aperture array, the Mk. II phased array feed achieves a beam equivalent noise temperature less than 40 K from 0.78 GHz to 1.7 GHz and less than 50 K from 0.7 GHz to 1.8 GHz for a boresight beam directed at the zenith. We believe these are the lowest reported noise temperatures over these frequency ranges for ambient-temperature phased arrays. The measured noise temperature includes receiver electronics noise, ohmic losses in the array, and stray radiation from sidelobes illuminating the sky and ground away from the desired field of view. This phased array feed was designed for the Australian Square Kilometre Array Pathfinder to demonstrate fast astronomical surveys with a wide field of view for the Square Kilometre Array. △ Less

Submitted 6 November, 2015; v1 submitted 17 September, 2015; originally announced September 2015.

Comments: 5 pages, 4 figures, accepted for publication in Antennas and Propagation (ISAP), 2015 International Symposium on

Report number: EP155528

Journal ref: 2015 International Symposium on Antennas and Propagation (ISAP), Hobart, TAS, 2015, pp. 1-4

Measured Sensitivity of the First Mark II Phased Array Feed on an ASKAP Antenna

Authors: A. P. Chippendale, A. J. Brown, R. J. Beresford, G. A. Hampson, A. Macleod, R. D. Shaw, M. L. Brothers, C. Cantrall, A. R. Forsyth, S. G. Hay, M. Leach

Abstract: This paper presents the measured sensitivity of CSIRO's first Mk. II phased array feed (PAF) on an ASKAP antenna. The Mk. II achieves a minimum system-temperature-over-efficiency $T_\mathrm{sys}/ηいーた$ of 78 K at 1.23 GHz and is 95 K or better from 835 MHz to 1.8 GHz. This PAF was designed for the Australian SKA Pathfinder telescope to demonstrate fast astronomical surveys with a wide field of view fo… ▽ More This paper presents the measured sensitivity of CSIRO's first Mk. II phased array feed (PAF) on an ASKAP antenna. The Mk. II achieves a minimum system-temperature-over-efficiency $T_\mathrm{sys}/ηいーた$ of 78 K at 1.23 GHz and is 95 K or better from 835 MHz to 1.8 GHz. This PAF was designed for the Australian SKA Pathfinder telescope to demonstrate fast astronomical surveys with a wide field of view for the Square Kilometre Array (SKA). △ Less

Submitted 1 September, 2015; originally announced September 2015.

Comments: 5 pages, 2 figures, accepted for publication in Electromagnetics in Advanced applications (ICEAA), 2015 International Conference on

Discovery of HI gas in a young radio galaxy at $z = 0.44$ using the Australian Square Kilometre Array Pathfinder

Authors: J. R. Allison, E. M. Sadler, V. A. Moss, M. T. Whiting, R. W. Hunstead, M. B. Pracy, S. J. Curran, S. M. Croom, M. Glowacki, R. Morganti, S. S. Shabala, M. A. Zwaan, G. Allen, S. W. Amy, P. Axtens, L. Ball, K. W. Bannister, S. Barker, M. E. Bell, D. C. -J. Bock, R. Bolton, M. Bowen, B. Boyle, R. Braun, S. Broadhurst , et al. (78 additional authors not shown)

Abstract: We report the discovery of a new 21-cm HI absorption system using commissioning data from the Boolardy Engineering Test Array of the Australian Square Kilometre Array Pathfinder (ASKAP). Using the 711.5 - 1015.5 MHz band of ASKAP we were able to conduct a blind search for the 21-cm line in a continuous redshift range between $z = 0.4$ and 1.0, which has, until now, remained largely unexplored. The… ▽ More We report the discovery of a new 21-cm HI absorption system using commissioning data from the Boolardy Engineering Test Array of the Australian Square Kilometre Array Pathfinder (ASKAP). Using the 711.5 - 1015.5 MHz band of ASKAP we were able to conduct a blind search for the 21-cm line in a continuous redshift range between $z = 0.4$ and 1.0, which has, until now, remained largely unexplored. The absorption line is detected at $z = 0.44$ towards the GHz-peaked spectrum radio source PKS B1740$-$517 and demonstrates ASKAP's excellent capability for performing a future wide-field survey for HI absorption at these redshifts. Optical spectroscopy and imaging using the Gemini-South telescope indicates that the HI gas is intrinsic to the host galaxy of the radio source. The narrow OIII emission lines show clear double-peaked structure, indicating either large-scale outflow or rotation of the ionized gas. Archival data from the \emph{XMM-Newton} satellite exhibit an absorbed X-ray spectrum that is consistent with a high column density obscuring medium around the active galactic nucleus. The HI absorption profile is complex, with four distinct components ranging in width from 5 to 300 km s$^{-1}$ and fractional depths from 0.2 to 20 per cent. In addition to systemic HI gas, in a circumnuclear disc or ring structure aligned with the radio jet, we find evidence for a possible broad outflow of neutral gas moving at a radial velocity of $v \sim 300$ km s$^{-1}$. We infer that the expanding young radio source ($t_{\rm age} \approx 2500$ yr) is cocooned within a dense medium and may be driving circumnuclear neutral gas in an outflow of $\sim$ 1 $\mathrm{M}_{\odot}$ yr$^{-1}$. △ Less

Submitted 16 August, 2015; v1 submitted 4 March, 2015; originally announced March 2015.

Comments: 18 pages, 11 figures, accepted for publication in MNRAS

The Australian Square Kilometre Array Pathfinder: System Architecture and Specifications of the Boolardy Engineering Test Array

Authors: A. W. Hotan, J. D. Bunton, L. Harvey-Smith, B. Humphreys, B. D. Jeffs, T. Shimwell, J. Tuthill, M. Voronkov, G. Allen, S. Amy, K. Ardern, P. Axtens, L. Ball, K. Bannister, S. Barker, T. Bateman, R. Beresford, D. Bock, R. Bolton, M. Bowen, B. Boyle, R. Braun, S. Broadhurst, D. Brodrick, K. Brooks , et al. (76 additional authors not shown)

Abstract: This paper describes the system architecture of a newly constructed radio telescope - the Boolardy Engineering Test Array, which is a prototype of the Australian Square Kilometre Array Pathfinder telescope. Phased array feed technology is used to form multiple simultaneous beams per antenna, providing astronomers with unprecedented survey speed. The test array described here is a 6-antenna interfe… ▽ More This paper describes the system architecture of a newly constructed radio telescope - the Boolardy Engineering Test Array, which is a prototype of the Australian Square Kilometre Array Pathfinder telescope. Phased array feed technology is used to form multiple simultaneous beams per antenna, providing astronomers with unprecedented survey speed. The test array described here is a 6-antenna interferometer, fitted with prototype signal processing hardware capable of forming at least 9 dual-polarisation beams simultaneously, allowing several square degrees to be imaged in a single pointed observation. The main purpose of the test array is to develop beamforming and wide-field calibration methods for use with the full telescope, but it will also be capable of limited early science demonstrations. △ Less

Submitted 4 September, 2014; originally announced September 2014.

Comments: 17 pages, 12 figures, accepted for publication in PASA