Showing 1–50 of 117 results for author: Cordelli, M

The Mu2e crystal and SiPM calorimeter: construction status

Authors: Nikolay Atanov, Vladimir Baranov, Leo Borrel, Caterina Bloise, Julian Budagov, Sergio Ceravol, Franco Cervelli, Francesco Colao, Marco Cordelli, Giovanni Corradi, Yuri Davydov, Stefano Di Falco, Eleonora Diociaiuti, Simone Donati, Bertrand Echenard, Carlo Ferrari, Ruben Gargiulo, Antonio Gioiosa, Simona Giovannella, Valerio Giusti, Vladimir Glagolev, Francesco Grancagnolo, Dariush Hampai, Fabio Happacher, David Hitlin , et al. (15 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab searches for the neutrino-less conversion of a negative muon into an electron, with a distinctive signature of a mono-energetic electron with energy of 104.967 MeV. The calorimeter is made of two disks of pure CsI crystals, each read out by two custom large area UV-extended SiPMs. It plays a fundamental role in providing excellent particle identification capabilitie… ▽ More The Mu2e experiment at Fermilab searches for the neutrino-less conversion of a negative muon into an electron, with a distinctive signature of a mono-energetic electron with energy of 104.967 MeV. The calorimeter is made of two disks of pure CsI crystals, each read out by two custom large area UV-extended SiPMs. It plays a fundamental role in providing excellent particle identification capabilities and an online trigger filter while improving the track reconstruction, requiring better than 10% energy and 500 ps timing resolutions for 100 MeV electrons. In this paper, we present the status of construction and the Quality Control (QC) performed on the produced crystals and photosensors, the development of the rad-hard electronics, and the most important results of the irradiation tests. Construction of the mechanics is also reported. Status and plans for the calorimeter assembly and its first commissioning are described. △ Less

Submitted 28 January, 2024; originally announced January 2024.

Journal ref: IEEE TRANSACTIONS ON NUCLEAR SCIENCE, VOL. 70, NO. 7, 2023

Implementation and performances of the IPbus protocol for the JUNO Large-PMT readout electronics

Authors: Riccardo Triozzi, Andrea Serafini, Marco Bellato, Antonio Bergnoli, Matteo Bolognesi, Riccardo Brugnera, Vanessa Cerrone, Chao Chen, Barbara Clerbaux, Alberto Coppi, Daniele Corti, Flavio dal Corso, Jianmeng Dong, Wei Dou, Lei Fan, Alberto Garfagnini, Arsenii Gavrikov, Guanghua Gong, Marco Grassi, Rosa Maria Guizzetti, Shuang Hang, Cong He, Jun Hu, Roberto Isocrate, Beatrice Jelmini , et al. (107 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. Thanks to the tight requirements on its optical and radio-purity properties, it will be able to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range from tens of keV to hundreds of MeV. A key requirement for the success of the exp… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. Thanks to the tight requirements on its optical and radio-purity properties, it will be able to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range from tens of keV to hundreds of MeV. A key requirement for the success of the experiment is an unprecedented 3% energy resolution, guaranteed by its large active mass (20 kton) and the use of more than 20,000 20-inch photo-multiplier tubes (PMTs) acquired by high-speed, high-resolution sampling electronics located very close to the PMTs. As the Front-End and Read-Out electronics is expected to continuously run underwater for 30 years, a reliable readout acquisition system capable of handling the timestamped data stream coming from the Large-PMTs and permitting to simultaneously monitor and operate remotely the inaccessible electronics had to be developed. In this contribution, the firmware and hardware implementation of the IPbus based readout protocol will be presented, together with the performances measured on final modules during the mass production of the electronics. △ Less

Submitted 20 February, 2023; originally announced February 2023.

Mass testing of the JUNO experiment 20-inch PMTs readout electronics

Authors: Alberto Coppi, Beatrice Jelmini, Marco Bellato, Antonio Bergnoli, Matteo Bolognesi, Riccardo Brugnera, Vanessa Cerrone, Chao Chen, Barbara Clerbaux, Daniele Corti, Flavio dal Corso, Jianmeng Dong, Wei Dou, Lei Fan, Alberto Garfagnini, Arsenii Gavrikov, Guanghua Gong, Marco Grassi, Rosa Maria Guizzetti, Shuang Hang, Cong He, Jun Hu, Roberto Isocrate, Xiaolu Ji, Xiaoshan Jiang , et al. (107 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose, large size, liquid scintillator experiment under construction in China. JUNO will perform leading measurements detecting neutrinos from different sources (reactor, terrestrial and astrophysical neutrinos) covering a wide energy range (from 200 keV to several GeV). This paper focuses on the design and development of a test pro… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose, large size, liquid scintillator experiment under construction in China. JUNO will perform leading measurements detecting neutrinos from different sources (reactor, terrestrial and astrophysical neutrinos) covering a wide energy range (from 200 keV to several GeV). This paper focuses on the design and development of a test protocol for the 20-inch PMT underwater readout electronics, performed in parallel to the mass production line. In a time period of about ten months, a total number of 6950 electronic boards were tested with an acceptance yield of 99.1%. △ Less

Submitted 11 January, 2023; originally announced January 2023.

Validation and integration tests of the JUNO 20-inch PMTs readout electronics

Authors: Vanessa Cerrone, Katharina von Sturm, Marco Bellato, Antonio Bergnoli, Matteo Bolognesi, Riccardo Brugnera, Chao Chen, Barbara Clerbaux, Alberto Coppi, Flavio dal Corso, Daniele Corti, Jianmeng Dong, Wei Dou, Lei Fan, Alberto Garfagnini, Guanghua Gong, Marco Grassi, Shuang Hang, Rosa Maria Guizzetti, Cong He, Jun Hu, Roberto Isocrate, Beatrice Jelmini, Xiaolu Ji, Xiaoshan Jiang , et al. (105 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. JUNO will be able to study the neutrino mass ordering and to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range, spanning from 200 keV to several GeV. Given the ambitious physics goals of JUNO, the electronic system has to meet… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. JUNO will be able to study the neutrino mass ordering and to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range, spanning from 200 keV to several GeV. Given the ambitious physics goals of JUNO, the electronic system has to meet specific tight requirements, and a thorough characterization is required. The present paper describes the tests performed on the readout modules to measure their performances. △ Less

Submitted 16 December, 2022; originally announced December 2022.

Comments: 20 pages, 13 figures

An automated QC Station for the Calibration of the Mu2e Calorimeter Readout Units

Authors: E. Sanzani, C. Bloise, S. Ceravolo, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, S. Di Falco, E. Diociaiuti, S. Donati, C. Ferrari, R. Gargiulo, A. Gioiosa, S. Giovannella, V. Giusti, D. Hampai, F. Happacher, M. Martini, S. Miscetti, L. Morescalchi, D. Paesani, D. Pasciuto, E. Pedreschi, F. Raffaelli, I. Sarra , et al. (3 additional authors not shown)

Abstract: The Mu2e calorimeter will employ Readout Units, each made of two Silicon Photomultipliers arrays and two Front End Electronics boards. To calibrate them, we have designed, assembled and put in operation an automated Quality Control (QC) station. Gain, collected charge and photon detection efficiency are evaluated for each unit. In this paper, the QC Station is presented, in its hardware and softwa… ▽ More The Mu2e calorimeter will employ Readout Units, each made of two Silicon Photomultipliers arrays and two Front End Electronics boards. To calibrate them, we have designed, assembled and put in operation an automated Quality Control (QC) station. Gain, collected charge and photon detection efficiency are evaluated for each unit. In this paper, the QC Station is presented, in its hardware and software aspects, summarizing also the tests performed on the ROUs and the first measurement results. △ Less

Submitted 26 September, 2022; originally announced September 2022.

Comments: To appear on NIM

A novel measurement of initial-state gluon radiation in hadron collisions using Drell-Yan events

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (375 additional authors not shown)

Abstract: A study of initial-state gluon radiation (ISR) in hadron collisions is presented using Drell-Yan (DY) events produced in proton-antiproton collisions by the Tevatron collider at a center-of-mass energy of 1.96 TeV. This paper adopts a novel approach which uses the mean value of the Z/$γがんま^*$ transverse momentum $<p_T^{DY}>$ in DY events as a powerful observable to characterize the effect of ISR. In… ▽ More A study of initial-state gluon radiation (ISR) in hadron collisions is presented using Drell-Yan (DY) events produced in proton-antiproton collisions by the Tevatron collider at a center-of-mass energy of 1.96 TeV. This paper adopts a novel approach which uses the mean value of the Z/$γがんま^*$ transverse momentum $<p_T^{DY}>$ in DY events as a powerful observable to characterize the effect of ISR. In a data sample corresponding to an integrated luminosity of 9.4 fb$^{-1}$ collected with the CDF Run II detector, $<p_T^{DY}>$ is measured as a function of the Z/$γがんま^*$ invariant mass. It is found that these two observables have a dependence, $<p_T^{DY}> = -8 + 2.2 \ln m_{DY}^2$ [GeV/c], where $m_{DY}$ is the value of the Z/$γがんま^*$ mass measured in units of GeV/$c^2$. This linear dependence is observed for the first time in this analysis. It may be exploited to model the effect of ISR and constrain its impact in other processes. △ Less

Submitted 28 October, 2021; v1 submitted 28 October, 2021; originally announced October 2021.

Comments: 14 pages, 14 figures

Measurement of the charge asymmetry of electrons from the decays of $W$ bosons produced in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (376 additional authors not shown)

Abstract: At the Fermilab Tevatron proton-antiproton ($p\bar{p}$) collider, high-mass electron-neutrino ($eνにゅー$) pairs are produced predominantly in the process $p \bar{p} \rightarrow W(\rightarrow eνにゅー) + X$. The asymmetry of the electron and positron yield as a function of their pseudorapidity constrain the slope of the ratio of the $u$- to $d$-quark parton distributions versus the fraction of the proton mome… ▽ More At the Fermilab Tevatron proton-antiproton ($p\bar{p}$) collider, high-mass electron-neutrino ($eνにゅー$) pairs are produced predominantly in the process $p \bar{p} \rightarrow W(\rightarrow eνにゅー) + X$. The asymmetry of the electron and positron yield as a function of their pseudorapidity constrain the slope of the ratio of the $u$- to $d$-quark parton distributions versus the fraction of the proton momentum carried by the quarks. This paper reports on the measurement of the electron-charge asymmetry using the full data set recorded by the Collider Detector at Fermilab in 2001--2011 and corresponding to 9.1~fb$^{-1}$ of integrated luminosity. The measurement significantly improves the precision of the Tevatron constraints on the parton-distribution functions of the proton. Numerical tables of the measurement are provided. △ Less

Submitted 2 November, 2021; v1 submitted 9 July, 2021; originally announced July 2021.

Comments: 27 pages, 25 figures. To be published in PRD

Report number: FERMILAB-PUB-21-293-E

Mu2e calorimeter readout system

Authors: N. Atanov, V. Baranov, L. Baldini, J. Budagov, D. Caiulo, F. Cei, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, Yu. I. Davydov, F. D'Errico, S. Di Falco, E. Diociaiuti, S. Donati, R. Donghia, B. Echenard, S. Faetti, S. Giovannella, S. Giudici, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, L. Lazzeri , et al. (21 additional authors not shown)

Abstract: The Mu2e electromagnetic calorimeter is made of two disks of un-doped parallelepiped CsI crystals readout by SiPM. There are 674 crystals in one disk and each crystal is readout by an array of two SiPM. The readout electronics is composed of two types of modules: 1) the front-end module hosts the shaping amplifier and the high voltage linear regulator; since one front-end module is interfaced to o… ▽ More The Mu2e electromagnetic calorimeter is made of two disks of un-doped parallelepiped CsI crystals readout by SiPM. There are 674 crystals in one disk and each crystal is readout by an array of two SiPM. The readout electronics is composed of two types of modules: 1) the front-end module hosts the shaping amplifier and the high voltage linear regulator; since one front-end module is interfaced to one SiPM, a total of 2696 modules are needed for the entire calorimeter; 2) a waveform digitizer provides a further level of amplification and digitizes the SiPM signal at the sampling frequency of $200\ \text{M}\text{Hz}$ with 12-bits ADC resolution; since one board digitizes the data received from 20 SiPMs, a total of 136 boards are needed. The readout system operational conditions are hostile: ionization dose of $20\ \text{krads}$, neutron flux of $10^{12}\ \mathrm{n}(1\ \text{MeVeq})/\text{cm}^2$, magnetic field of $1\ \text{T}$ and in vacuum level of $10^{-4}\ \text{Torr}$. A description of the readout system and qualification tests is reported. △ Less

Submitted 9 July, 2019; originally announced July 2019.

Journal ref: Nuclear Inst. and Methods in Physics Research, A, 2019

Search for Higgs-like particles produced in association with bottom quarks in proton-antiproton collisions

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: We report on a search for a spin-zero non-standard-model particle in proton-antiproton collisions collected by the Collider Detector at Fermilab at a center-of-mass-energy of 1.96 TeV. This particle, the $φふぁい$ boson, is expected to decay into a bottom-antibottom quark pair and to be produced in association with at least one bottom quark. The data sample consists of events with three jets identified… ▽ More We report on a search for a spin-zero non-standard-model particle in proton-antiproton collisions collected by the Collider Detector at Fermilab at a center-of-mass-energy of 1.96 TeV. This particle, the $φふぁい$ boson, is expected to decay into a bottom-antibottom quark pair and to be produced in association with at least one bottom quark. The data sample consists of events with three jets identified as initiated by bottom quarks and corresponds to $5.4~\text{fb}^{-1}$ of integrated luminosity. In each event, the invariant mass of the two most energetic jets is studied by looking for deviations from the multijet background, which is modeled using data. No evidence is found for such particle. Exclusion upper limits ranging from 20 to 2 pb are set for the product of production cross sections times branching fraction for hypothetical $φふぁい$ boson with mass between 100 and 300 GeV/$c^2$. These are the most stringent constraints to date. △ Less

Submitted 12 February, 2019; originally announced February 2019.

Comments: submitted to PRD

Report number: FERMILAB-PUB-19-067-PPD

Journal ref: Phys. Rev. D 99, 052001 (2019)

The Mu2e calorimeter: quality assurance of production crystals and SiPMs

Authors: N. Atanov, V. Baranov, J. Budagov, D. Caiulo, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, Yu. I. Davydov, S. Di Falco, E. Diociaiuti, S. Donati, R. Donghia, B. Echenard, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat, E. Pedreschi , et al. (12 additional authors not shown)

Abstract: The Mu2e calorimeter is composed of two disks each containing 1348 pure CsI crystals, each crystal read out by two arrays of 6x6 mm2 monolithic SiPMs. The experimental requirements have been translated in a series of technical specifications for both crystals and SiPMs. Quality assurance tests, on first crystal and then SiPM production batches, confirm the performances of preproduction samples pre… ▽ More The Mu2e calorimeter is composed of two disks each containing 1348 pure CsI crystals, each crystal read out by two arrays of 6x6 mm2 monolithic SiPMs. The experimental requirements have been translated in a series of technical specifications for both crystals and SiPMs. Quality assurance tests, on first crystal and then SiPM production batches, confirm the performances of preproduction samples previously assembled in a calorimeter prototype and tested with an electron beam. The production yield is sufficient to allow the construction of a calorimeter of the required quality in the expected times. △ Less

Submitted 19 December, 2018; originally announced December 2018.

Comments: 2 pages, 2 figures, 14th meeting on Advanced Detectors

Measurement of the differential cross sections for $W$-boson production in association with jets in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: This paper presents a study of the production of a single $W$ boson in association with one or more jets in proton-antiproton collisions at $\sqrt{s}=1.96$ TeV, using the entire data set collected in 2001-2011 by the Collider Detector at Fermilab at the Tevatron, which corresponds to an integrated luminosity of $9.0$ fb$^{-1}$. The $W$ boson is identified through its leptonic decays into electron… ▽ More This paper presents a study of the production of a single $W$ boson in association with one or more jets in proton-antiproton collisions at $\sqrt{s}=1.96$ TeV, using the entire data set collected in 2001-2011 by the Collider Detector at Fermilab at the Tevatron, which corresponds to an integrated luminosity of $9.0$ fb$^{-1}$. The $W$ boson is identified through its leptonic decays into electron and muon. The production cross sections are measured for each leptonic decay mode and combined after testing that the ratio of the $W(\rightarrow μみゅーνにゅー)+$jets cross section to the $W(\rightarrow eνにゅー)+$jets cross section agrees with the hypothesis of $e$-$μみゅー$ lepton universality. The combination of measured cross sections, differential in the inclusive jet multiplicity ($W+\geqslant N$ jets with $N=1,\,2,\,3, \textrm{or }4$) and in the transverse energy of the leading jet, are compared with theoretical predictions. △ Less

Submitted 7 August, 2018; originally announced August 2018.

Comments: submitted to Phys. Rev. D

Report number: FERMILAB-PUB-18-371-E

Journal ref: Phys. Rev. D 98, 112005 (2018)

Search for standard-model Z and Higgs bosons decaying into a bottom-antibottom quark pair in proton-antiproton collisions at 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: The Collider Detector at Fermilab collected a unique sample of jets originating from bottom-quark fragmentation ($b$-jets) by selecting online proton-antiproton ($p\bar{p}$) collisions with a vertex displaced from the $p\bar{p}$ interaction point, consistent with the decay of a bottom-quark hadron. This data set, collected at a center-of-mass energy of $\sqrt{s}=$1.96 TeV, and corresponding to an… ▽ More The Collider Detector at Fermilab collected a unique sample of jets originating from bottom-quark fragmentation ($b$-jets) by selecting online proton-antiproton ($p\bar{p}$) collisions with a vertex displaced from the $p\bar{p}$ interaction point, consistent with the decay of a bottom-quark hadron. This data set, collected at a center-of-mass energy of $\sqrt{s}=$1.96 TeV, and corresponding to an integrated luminosity of $5.4~\rm{fb}^{-1}$, is used to measure the $Z$-boson production cross section times branching ratio into $b\bar{b}$. The number of $Z\rightarrow b\bar{b}$ events is determined by fitting the dijet-mass distribution while constraining the dominant $b$-jet background, originating from QCD multijet events, with data. The result, $σしぐま(p\bar{p} \rightarrow Z) \times \mathcal{B}(Z \rightarrow b\bar{b})= 1.11\pm 0.08(\text{stat}) \pm 0.14(\text{syst})~\text{nb}$, is the most precise measurement of this process, and is consistent with the standard-model prediction. The data set is also used to search for Higgs-boson production. No significant signal is expected in our data and the first upper limit on the cross section for the inclusive $p\bar p \rightarrow H\rightarrow b\bar b$ process at $\sqrt{s}=$1.96 TeV is set, corresponding to 33 times the expected standard-model cross section, or $σしぐま= 40.6$ pb, at the 95\% confidence level. △ Less

Submitted 18 October, 2018; v1 submitted 3 July, 2018; originally announced July 2018.

Report number: FERMILAB-PUB-18-307-E-PPD

Journal ref: Phys. Rev. D 98, 072002 (2018)

An induced annealing technique for SiPMs neutron radiation damage

Authors: M. Cordelli, E. Diociaiuti, A. Ferrari, S. Miscetti, S. Muller, G. Pezzullo, I. Sarra

Abstract: The use of Silicon Photo-Multipliers(SiPMs)has become popular in the design of High Energy Physics experimental apparatus with a growing interest for their application in detector area where a significant amount of non-ionising dose is delivered. For these devices, the main effect caused by the neutron fluence is a linear increase of the leakage current. In this paper, we present a technique that… ▽ More The use of Silicon Photo-Multipliers(SiPMs)has become popular in the design of High Energy Physics experimental apparatus with a growing interest for their application in detector area where a significant amount of non-ionising dose is delivered. For these devices, the main effect caused by the neutron fluence is a linear increase of the leakage current. In this paper, we present a technique that provides a partial recovery of the neutron damage on SiPMs by means of an Electrical Induced Annealing. Tests were performed, at the temperature of 20C, on a sample of three SiPM arrays (2x3) of 6 mm^2 cells with 50 um pixel sizes: two from Hamamatsu and one from SensL. These SiPMs have been exposed to neutrons generated by the Elbe Positron Source facility (Dresden), up to a total fluence of 8x10^11 n1MeV-eq/cm^2. Our techniques allowed to reduced the leakage current of a factor ranging between 15-20 depending on the overbias used and the SiPM vendor. Because, during the process the SiPM current can reach O(100 mA), the sensors need to be operated in a condition that provides thermal dissipation. Indeed, caution must be used when applying this kind of procedures on the SiPMs, because it may damage permanently the device itself. △ Less

Submitted 6 December, 2021; v1 submitted 25 April, 2018; originally announced April 2018.

Quality Assurance on Un-Doped CsI Crystals for the Mu2e Experiment

Authors: N. Atanov, V. Baranov, J. Budagov, Yu. I. Davydov, V. Glagolev, V. Tereshchenko, Z. Usubov, F. Cervelli, S. Di Falco, S. Donati, L. Morescalchi, E. Pedreschi, G. Pezzullo, F. Raffaelli, F. Spinella, F. Colao, M. Cordelli, G. Corradi, E. Diociaiuti, R. Donghia, S. Giovannella, F. Happacher, M. Martini, S. Miscetti, M. Ricci , et al. (12 additional authors not shown)

Abstract: The Mu2e experiment is constructing a calorimeter consisting of 1,348 undoped CsI crystals in two disks. Each crystal has a dimension of 34 x 34 x 200 mm, and is readout by a large area silicon PMT array. A series of technical specifications was defined according to physics requirements. Preproduction CsI crystals were procured from three firms: Amcrys, Saint-Gobain and Shanghai Institute of Ceram… ▽ More The Mu2e experiment is constructing a calorimeter consisting of 1,348 undoped CsI crystals in two disks. Each crystal has a dimension of 34 x 34 x 200 mm, and is readout by a large area silicon PMT array. A series of technical specifications was defined according to physics requirements. Preproduction CsI crystals were procured from three firms: Amcrys, Saint-Gobain and Shanghai Institute of Ceramics. We report the quality assurance on crystal's scintillation properties and their radiation hardness against ionization dose and neutrons. With a fast decay time of 30 ns and a light output of more than 100 p.e./MeV measured with a bi-alkali PMT, undoped CsI crystals provide a cost-effective solution for the Mu2e experiment. △ Less

Submitted 21 February, 2018; originally announced February 2018.

Comments: 7 pages, 16 figures, published in IEEE TNS NS (2018)

Journal ref: IEEE TRANSACTIONS ON NUCLEAR SCIENCE, VOL. 65, NO. 2, FEBRUARY 2018

Design and status of the Mu2e crystal calorimeter

Authors: N. Atanov, V. Baranov, J. Budagov, Yu. I. Davydov, V. Glagolev, V. Tereshchenko, Z. Usubov, F. Cervelli, S. Di Falco, S. Donati, L. Morescalchi, E. Pedreschi, G. Pezzullo, F. Raffaelli, F. Spinella, F. Colao, M. Cordelli, G. Corradi, E. Diociaiuti, R. Donghia, S. Giovannella, F. Happacher, M. Martini, S. Miscetti, M. Ricci , et al. (10 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab searches for the charged-lepton flavour violating (CLFV) conversion of a negative muon into an electron in the field of an aluminum nucleus, with a distinctive signature of a mono-energetic electron of energy slightly below the muon rest mass (104.967 MeV). The Mu2e goal is to improve by four orders of magnitude the search sensitivity with respect to the previous ex… ▽ More The Mu2e experiment at Fermilab searches for the charged-lepton flavour violating (CLFV) conversion of a negative muon into an electron in the field of an aluminum nucleus, with a distinctive signature of a mono-energetic electron of energy slightly below the muon rest mass (104.967 MeV). The Mu2e goal is to improve by four orders of magnitude the search sensitivity with respect to the previous experiments. Any observation of a CLFV signal will be a clear indication of new physics. The Mu2e detector is composed of a tracker, an electro- magnetic calorimeter and an external veto for cosmic rays surrounding the solenoid. The calorimeter plays an important role in providing particle identification capabilities, a fast online trigger filter, a seed for track reconstruction while working in vacuum, in the presence of 1 T axial magnetic field and in an harsh radiation environment. The calorimeter requirements are to provide a large acceptance for 100 MeV electrons and reach at these energies: (a) a time resolution better than 0.5 ns; (b) an energy resolution < 10% and (c) a position resolution of 1 cm. The calorimeter design consists of two disks, each one made of 674 undoped CsI crystals read by two large area arrays of UV-extended SiPMs. We report here the construction and test of the Module-0 prototype. The Module-0 has been exposed to an electron beam in the energy range around 100 MeV at the Beam Test Facility in Frascati. Preliminary results of timing and energy resolution at normal incidence are shown. A discussion of the technical aspects of the calorimeter engineering is also reported in this paper. △ Less

Submitted 18 February, 2018; originally announced February 2018.

Comments: 8 pages, 16 figures, submitted to IEEE

The Mu2e Calorimeter Final Technical Design Report

Authors: N. Atanov, V. Baranov, J. Budagov, S. Ceravolo, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, E. Dane, Y. Davydov, S. Di Falco, S. Donati, E. Diociaiuti, R. Donghia, B. Echenard, K. Flood, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi , et al. (15 additional authors not shown)

Abstract: Since the first version of the Mu2e TDR released at the beginning of 2015, the Mu2e Calorimeter system has undergone a long list of changes to arrive to its final design. These changes were primarily caused by two reasons: (i) the technology choice between the TDR proposed solution of BaF2 crystals readout with solar blind Avalanche Photodiodes (APDs) and the backup option of CsI crystals readout… ▽ More Since the first version of the Mu2e TDR released at the beginning of 2015, the Mu2e Calorimeter system has undergone a long list of changes to arrive to its final design. These changes were primarily caused by two reasons: (i) the technology choice between the TDR proposed solution of BaF2 crystals readout with solar blind Avalanche Photodiodes (APDs) and the backup option of CsI crystals readout with Silicon Photomultipliers (SiPM) has been completed and (ii) the channels numbering, the mechanical system and the readout electronics were substantially modified while proceeding with engineering towards the final project. This document updates the description of the calorimeter system adding the most recent engineering drawings and tecnical progresses. △ Less

Submitted 18 February, 2018; originally announced February 2018.

Comments: TDR

Design, status and perspective of the Mu2e crystal calorimeter

Authors: N. Atanov, V. Baranov, J. Budagov, F. Cervelli, F. Colao, E. Diociaiuti, M. Cordelli, G. Corradi, E. Danè, Yu. Davydov, S. Donati, R. Donghia, S. Di Falco, B. Echenard, L. Morescalchi, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat , et al. (11 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab will search for the charged lepton flavor violating process of neutrino-less $μみゅー\to e$ coherent conversion in the field of an aluminum nucleus. Mu2e will reach a single event sensitivity of about $2.5\cdot 10^{-17}$ that corresponds to four orders of magnitude improvements with respect to the current best limit. The detector system consists of a straw tube tracker an… ▽ More The Mu2e experiment at Fermilab will search for the charged lepton flavor violating process of neutrino-less $μみゅー\to e$ coherent conversion in the field of an aluminum nucleus. Mu2e will reach a single event sensitivity of about $2.5\cdot 10^{-17}$ that corresponds to four orders of magnitude improvements with respect to the current best limit. The detector system consists of a straw tube tracker and a crystal calorimeter made of undoped CsI coupled with Silicon Photomultipliers. The calorimeter was designed to be operable in a harsh environment where about 10 krad/year will be delivered in the hottest region and work in presence of 1 T magnetic field. The calorimeter role is to perform $μみゅー$/e separation to suppress cosmic muons mimiking the signal, while providing a high level trigger and a seeding the track search in the tracker. In this paper we present the calorimeter design and the latest R$\&$D results. △ Less

Submitted 18 April, 2018; v1 submitted 9 January, 2018; originally announced January 2018.

Comments: 4 pages, conference proceeding for a presentation held at TIPP'2017. To be published on Springer Proceedings in Physics

The Mu2e undoped CsI crystal calorimeter

Authors: N. Atanov, V. Baranov, J. Budagov, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, Yu. I. Davydov, S. Di Falco, E. Diociaiuti, S. Donati, R. Donghia, B. Echenard, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat, E. Pedreschi, G. Pezzullo , et al. (10 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab will search for Charged Lepton Flavor Violating conversion of a muon to an electron in an atomic field. The Mu2e detector is composed of a tracker, an electromagnetic calorimeter and an external system, surrounding the solenoid, to veto cosmic rays. The calorimeter plays an important role to provide: a) excellent particle identification capabilities; b) a fast trigg… ▽ More The Mu2e experiment at Fermilab will search for Charged Lepton Flavor Violating conversion of a muon to an electron in an atomic field. The Mu2e detector is composed of a tracker, an electromagnetic calorimeter and an external system, surrounding the solenoid, to veto cosmic rays. The calorimeter plays an important role to provide: a) excellent particle identification capabilities; b) a fast trigger filter; c) an easier tracker track reconstruction. Two disks, located downstream of the tracker, contain 674 pure CsI crystals each. Each crystal is read out by two arrays of UV-extended SiPMs. The choice of the crystals and SiPMs has been finalized after a thorough test campaign. A first small scale prototype consisting of 51 crystals and 102 SiPM arrays has been exposed to an electron beam at the BTF (Beam Test Facility) in Frascati. Although the readout electronics were not the final, results show that the current design is able to meet the timing and energy resolution required by the Mu2e experiment. △ Less

Submitted 22 February, 2018; v1 submitted 7 January, 2018; originally announced January 2018.

Comments: 6 pages, 8 figures, proceedings of the "Calorimetry for the high energy frontier (CHEF17)" conference, 2-6 October 2017, Lyon, France

Report number: FERMILAB-CONF-18-007-E

Journal ref: 2018_JINST_13_C02037

A search for the exotic meson $X(5568)$ with the Collider Detector at Fermilab

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (373 additional authors not shown)

Abstract: A search for the exotic meson $X(5568)$ decaying into the $B^0_s πぱい^{\pm}$ final state is performed using data corresponding to $9.6 \textrm{fb}^{-1}$ from $p{\bar p}$ collisions at $\sqrt{s} = 1960$ GeV recorded by the Collider Detector at Fermilab. No evidence for this state is found and an upper limit of 6.7\% at the 95\% confidence level is set on the fraction of $B^0_s$ produced through the… ▽ More A search for the exotic meson $X(5568)$ decaying into the $B^0_s πぱい^{\pm}$ final state is performed using data corresponding to $9.6 \textrm{fb}^{-1}$ from $p{\bar p}$ collisions at $\sqrt{s} = 1960$ GeV recorded by the Collider Detector at Fermilab. No evidence for this state is found and an upper limit of 6.7\% at the 95\% confidence level is set on the fraction of $B^0_s$ produced through the $X(5568) \rightarrow B^0_s \, πぱい^{\pm}$ process. △ Less

Submitted 27 December, 2017; originally announced December 2017.

Comments: 13 pages, 3 figures

Report number: FERMILAB-FN-1048-E

Journal ref: Phys. Rev. Lett. 120, 202006 (2018)

Pre-Production and Quality Assurance of the Mu2e Calorimeter Silicon Photomultipliers

Authors: M. Cordelli, F. Cervelli, E. Diociaiuti, S. Donati, R. Donghia, S. Di Falco, A. Ferrari, S. Giovannella, F. Happacher, M. Martini, L. Morescalchi, S. Miscetti, S. Muller, E. Pedreschi, G. Pezzullo, I. Sarra, F. Spinella

Abstract: The Mu2e electromagnetic calorimeter has to provide precise information on energy, time and position for $\sim$100 MeV electrons. It is composed of 1348 un-doped CsI crystals, each coupled to two large area Silicon Photomultipliers (SiPMs). A modular and custom SiPM layout consisting of a 3$\times$2 array of 6$\times$6 mm$^2$ UV-extended monolithic SiPMs has been developed to fulfill the Mu2e calo… ▽ More The Mu2e electromagnetic calorimeter has to provide precise information on energy, time and position for $\sim$100 MeV electrons. It is composed of 1348 un-doped CsI crystals, each coupled to two large area Silicon Photomultipliers (SiPMs). A modular and custom SiPM layout consisting of a 3$\times$2 array of 6$\times$6 mm$^2$ UV-extended monolithic SiPMs has been developed to fulfill the Mu2e calorimeter requirements and a pre-production of 150 prototypes has been procured by three international firms (Hamamatsu, SensL and Advansid). A detailed quality assurance process has been carried out on this first batch of photosensors: the breakdown voltage, the gain, the quenching time, the dark current and the Photon Detection Efficiency (PDE) have been determined for each monolithic cell of each SiPMs array. One sample for each vendor has been exposed to a neutron fluency up to $\sim$8.5~$\times$~10$^{11}$ 1 MeV (Si) eq. n/cm$^{2}$ and a linear increase of the dark current up to tens of mA has been observed. Others 5 samples for each vendor have undergone an accelerated aging in order to verify a Mean Time To Failure (MTTF) higher than $\sim$10$^{6}$ hours. △ Less

Submitted 13 December, 2017; originally announced December 2017.

Comments: NDIP 2017 - New Developments In Photodetection, 3-7 July 2017, Tours (France)

Quality Assurance on a custom SiPMs array for the Mu2e experiment

Authors: N. Atanov, V. Baranov, J. Budagov, Yu. I. Davydov, V. Glagolev, V. Tereshchenko, Z. Usubov, F. Cervelli, S. Di Falco, S. Donati, L. Morescalchi, E. Pedreschi, G. Pezzullo, F. Raffaelli, F. Spinella, F. Colao, M. Cordelli, G. Corradi, E. Diociaiuti, R. Donghia, S. Giovannella, F. Happacher, M. Martini, S. Miscetti, M. Ricci , et al. (10 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab will search for the coherent $μみゅー\to e$ conversion on aluminum atoms. The detector system consists of a straw tube tracker and a crystal calorimeter. A pre-production of 150 Silicon Photomultiplier arrays for the Mu2e calorimeter has been procured. A detailed quality assur- ance has been carried out on each SiPM for the determination of its own operation voltage, gain… ▽ More The Mu2e experiment at Fermilab will search for the coherent $μみゅー\to e$ conversion on aluminum atoms. The detector system consists of a straw tube tracker and a crystal calorimeter. A pre-production of 150 Silicon Photomultiplier arrays for the Mu2e calorimeter has been procured. A detailed quality assur- ance has been carried out on each SiPM for the determination of its own operation voltage, gain, dark current and PDE. The measurement of the mean-time-to-failure for a small random sample of the pro-production group has been also completed as well as the determination of the dark current increase as a function of the ioninizing and non-ioninizing dose. △ Less

Submitted 20 November, 2017; originally announced November 2017.

Comments: 4 pages, 10 figures, conference proceeding for NSS-MIC 2017

Neutron irradiation test of Hamamatsu, SensL and AdvanSiD UV-extended SiPMs

Authors: M. Cordelli, E. Diociaiuti, R. Donghia, A. Ferrari, S. Miscetti, S. Muller, I. Sarra

Abstract: In this paper, we report the measurement of the neutron radiation hardness of custom Silicon Photomultipliers arrays (SiPMs) manufactured by three companies: Hamamatsu (Japan), AdvanSiD (Italy) and SensL (Ireland). These custom SiPMs consist of a 2 x 3 array of 6 x 6 mm^2 monolithic cells with pixel sizes of respectively 50 um (Hamamatsu and SensL) and 30 um (AdvanSid). A sample from each vendor… ▽ More In this paper, we report the measurement of the neutron radiation hardness of custom Silicon Photomultipliers arrays (SiPMs) manufactured by three companies: Hamamatsu (Japan), AdvanSiD (Italy) and SensL (Ireland). These custom SiPMs consist of a 2 x 3 array of 6 x 6 mm^2 monolithic cells with pixel sizes of respectively 50 um (Hamamatsu and SensL) and 30 um (AdvanSid). A sample from each vendor has been exposed to neutrons generated by the Elbe Positron Source facility (Dresden), up to a total fluence of ~ 8.5 x 10^11 n_(1 MeV)/cm^2. Test results show that the dark current increases almost linearly with the neutron fluence. The room temperature annealing was quantified by measuring the dark current two months after the irradiation test. The dependence of the dark current on the device temperature and on the applied bias have been also evaluated. △ Less

Submitted 15 March, 2018; v1 submitted 17 October, 2017; originally announced October 2017.

Comments: 5 pages, 14 figures

Measurement of the inclusive-isolated prompt-photon cross section in $p\bar{p}$ collisions using the full CDF data set

Authors: CDF Collaboration, T. Aaltonen, M. G. Albrow, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (374 additional authors not shown)

Abstract: A measurement of the inclusive production cross section of isolated prompt photons in proton-antiproton collisions at center-of-mass energy $\sqrt{s}$=1.96TeV is presented. The results are obtained using the full Run II data sample collected with the Collider Detector at the Fermilab Tevatron, which corresponds to an integrated luminosity of 9.5fb$^{-1}$. The cross section is measured as a functio… ▽ More A measurement of the inclusive production cross section of isolated prompt photons in proton-antiproton collisions at center-of-mass energy $\sqrt{s}$=1.96TeV is presented. The results are obtained using the full Run II data sample collected with the Collider Detector at the Fermilab Tevatron, which corresponds to an integrated luminosity of 9.5fb$^{-1}$. The cross section is measured as a function of photon transverse energy, $E_T^γがんま$, in the range 30$ < E_T^γがんま <$500GeV and in the pseudorapidity region $|ηいーた^γがんま|<$1.0. The results are compared with predictions from parton-shower Monte Carlo models at leading order in quantum chromodynamics (QCD) and from next-to-leading order perturbative QCD calculations. The latter show good agreement with the measured cross section. △ Less

Submitted 1 March, 2017; originally announced March 2017.

Comments: submitted to Phys. Rev. D - RC

Report number: FERMILAB-PUB-17-053-PPD

Journal ref: Phys. Rev. D 96, 092003 (2017)

Measurement of the energy and time resolution of a undoped CsI + MPPC array for the Mu2e experiment

Authors: O. Atanova, M. Cordelli, G. Corradi, F. Colao, Yu. I. Davydov, R. Donghia, S. Di Falco, S. Giovannella, F. Happacher, M. Martini, S. Miscetti, L. Morescalchi, P. Murat, G. Pezzullo, A. Saputi, I. Sarra, S. R. Soleti, D. Tagnani, V. Tereshchenko, Z. Usubov

Abstract: This paper describes the measurements of energy and time response and resolution of a 3 x 3 array made of undoped CsI crystals coupled to large area Hamamatsu Multi Pixel Photon Counters. The measurements have been performed using the electron beam of the Beam Test Facility in Frascati (Rome, Italy) in the energy range 80-120 MeV. The measured energy resolution, estimated with the FWHM, at 100 MeV… ▽ More This paper describes the measurements of energy and time response and resolution of a 3 x 3 array made of undoped CsI crystals coupled to large area Hamamatsu Multi Pixel Photon Counters. The measurements have been performed using the electron beam of the Beam Test Facility in Frascati (Rome, Italy) in the energy range 80-120 MeV. The measured energy resolution, estimated with the FWHM, at 100 MeV is 16.4%. This resolution is dominated by the energy leakage due to the small dimensions of the prototype. The time is reconstructed by fitting the leading edge of the digitized signals and applying a digital constant fraction discrimination technique. A time resolution of about 110 ps at 100 MeV is achieved. △ Less

Submitted 13 February, 2017; originally announced February 2017.

Comments: 10 pages, 25 figures

Report number: FERMILAB-TM-2648-E

The calorimeter of the Mu2e experiment at Fermilab

Authors: N. Atanov, V. Baranov, J. Budagov, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, E. Dané, Yu. I. Davydov, S. Di Falco, E. Diociaiuti, S. Donati, R. Donghia, B. Echenard, K. Flood, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat , et al. (12 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab looks for Charged Lepton Flavor Violation (CLFV) improving by 4 orders of magnitude the current experimental sensitivity for the muon to electron conversion in a muonic atom. A positive signal could not be explained in the framework of the current Standard Model of particle interactions and therefore would be a clear indication of new physics. In 3 years of data tak… ▽ More The Mu2e experiment at Fermilab looks for Charged Lepton Flavor Violation (CLFV) improving by 4 orders of magnitude the current experimental sensitivity for the muon to electron conversion in a muonic atom. A positive signal could not be explained in the framework of the current Standard Model of particle interactions and therefore would be a clear indication of new physics. In 3 years of data taking, Mu2e is expected to observe less than one background event mimicking the electron coming from muon conversion. Achieving such a level of background suppression requires a deep knowledge of the experimental apparatus: a straw tube tracker, measuring the electron momentum and time, a cosmic ray veto system rejecting most of cosmic ray background and a pure CsI crystal calorimeter, that will measure time of flight, energy and impact position of the converted electron. The calorimeter has to operate in a harsh radiation environment, in a 10-4 Torr vacuum and inside a 1 T magnetic field. The results of the first qualification tests of the calorimeter components are reported together with the energy and time performances expected from the simulation and measured in beam tests of a small scale prototype. △ Less

Submitted 27 January, 2017; originally announced January 2017.

Comments: 11 pages, 7 figures, proceedings of 14th Topical Seminar on Innovative Particle and Radiation Detectors (IPRD16) 3 - 6 October 2016 Siena, Italy, Journal of Instrumentation, Volume 12, January 2017 http://stacks.iop.org/1748-0221/12/i=01/a=C01061

Irradiation study of UV Silicon Photomultipliers for the Mu2e Calorimeter

Authors: S. Baccaro, A. Cemmi, M. Cordelli, E. Diociaiuti, R. Donghia, A. Ferrari, S. Giovannella, S. Miscetti, S. Müller, M. Pillon, I. Sarra

Abstract: The Mu2e calorimeter is composed of 1400 un-doped CsI crystals, coupled to large area UV extended Silicon Photomultipliers (SiPMs), arranged in two annular disks. This calorimeter has to provide precise information on energy, timing and position resolutions. It should also be fast enough to handle the high rate background and it must operate and survive in the high radiation environment. Simulatio… ▽ More The Mu2e calorimeter is composed of 1400 un-doped CsI crystals, coupled to large area UV extended Silicon Photomultipliers (SiPMs), arranged in two annular disks. This calorimeter has to provide precise information on energy, timing and position resolutions. It should also be fast enough to handle the high rate background and it must operate and survive in the high radiation environment. Simulation studies estimated that, in the highest irradiated regions, each photo-sensor will absorb a dose of 20 krad and will be exposed to a neutron fluency of 5.5x10^11 n_(1MeV)/cm^2 in three years of running, with a safety factor of 3 included. At the end of 2015, we have concluded an irradiation campaign at the Frascati Neutron Generator (FNG, Frascati, Italy) measuring the response of two different 16 array models from Hamamatsu, which differ for the protection windows and a SiPM from FBK. In 2016, we have carried out two additional irradiation campaigns with neutrons and photons at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR, Dresden, Germany) and at the Calliope gamma irradiation facility at ENEA-Casaccia, respectively. A negligible increment of the leakage current and no gain change have been observed with the dose irradiation. On the other hand, at the end of the neutron irradiation, the gain does not show large changes whilst the leakage current increases by around a factor of 2000. In these conditions, the too high leakage current makes problematic to bias the SiPMs, thus requiring to cool them down to a running temperature of ~0 °C. △ Less

Submitted 23 January, 2017; originally announced January 2017.

Intrinsic limits on resolutions in muon- and electron-neutrino charged-current events in the KM3NeT/ORCA detector

Authors: S. Adrián-Martínez, M. Ageron, S. Aiello, A. Albert, F. Ameli, E. G. Anassontzis, M. Andre, G. Androulakis, M. Anghinolfi, G. Anton, M. Ardid, T. Avgitas, G. Barbarino, E. Barbarito, B. Baret, J. Barrios-Martí, A. Belias, E. Berbee, A. van den Berg, V. Bertin, S. Beurthey, V. van Beveren, N. Beverini, S. Biagi, A. Biagioni , et al. (228 additional authors not shown)

Abstract: Studying atmospheric neutrino oscillations in the few-GeV range with a multimegaton detector promises to determine the neutrino mass hierarchy. This is the main science goal pursued by the future KM3NeT/ORCA water Cherenkov detector in the Mediterranean Sea. In this paper, the processes that limit the obtainable resolution in both energy and direction in charged-current neutrino events in the ORCA… ▽ More Studying atmospheric neutrino oscillations in the few-GeV range with a multimegaton detector promises to determine the neutrino mass hierarchy. This is the main science goal pursued by the future KM3NeT/ORCA water Cherenkov detector in the Mediterranean Sea. In this paper, the processes that limit the obtainable resolution in both energy and direction in charged-current neutrino events in the ORCA detector are investigated. These processes include the composition of the hadronic fragmentation products, the subsequent particle propagation and the photon-sampling fraction of the detector. GEANT simulations of neutrino interactions in seawater produced by GENIE are used to study the effects in the 1 - 20 GeV range. It is found that fluctuations in the hadronic cascade in conjunction with the variation of the inelasticity y are most detrimental to the resolutions. The effect of limited photon sampling in the detector is of significantly less importance. These results will therefore also be applicable to similar detectors/media, such as those in ice. △ Less

Submitted 19 May, 2017; v1 submitted 29 November, 2016; originally announced December 2016.

Comments: 37 pages, 28 figures, JHEP published version

Journal ref: The KM3NeT collaboration, Adri{á}n-Mart{\'ı}nez, S., Ageron, M. et al. J. High Energ. Phys. (2017) 2017: 8

Measurement of the $D^+$-meson production cross section at low transverse momentum in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (372 additional authors not shown)

Abstract: We report on a measurement of the $D^{+}$-meson production cross section as a function of transverse momentum ($p_T$) in proton-antiproton ($p\bar{p}$) collisions at 1.96 TeV center-of-mass energy, using the full data set collected by the Collider Detector at Fermilab in Tevatron Run II and corresponding to 10 fb$^{-1}$ of integrated luminosity. We use $D^{+} \to K^-πぱい^+πぱい^+$ decays fully reconstruc… ▽ More We report on a measurement of the $D^{+}$-meson production cross section as a function of transverse momentum ($p_T$) in proton-antiproton ($p\bar{p}$) collisions at 1.96 TeV center-of-mass energy, using the full data set collected by the Collider Detector at Fermilab in Tevatron Run II and corresponding to 10 fb$^{-1}$ of integrated luminosity. We use $D^{+} \to K^-πぱい^+πぱい^+$ decays fully reconstructed in the central rapidity region $|y|<1$ with transverse momentum down to 1.5 GeV/$c$, a range previously unexplored in $p\bar{p}$ collisions. Inelastic $p\bar{p}$-scattering events are selected online using minimally-biasing requirements followed by an optimized offline selection. The $K^-πぱい^+πぱい^+$ mass distribution is used to identify the $D^+$ signal, and the $D^+$ transverse impact-parameter distribution is used to separate prompt production, occurring directly in the hard scattering process, from secondary production from $b$-hadron decays. We obtain a prompt $D^+$ signal of 2950 candidates corresponding to a total cross section $σしぐま(D^+, 1.5 < p_T < 14.5~\mbox{GeV/}c, |y|<1) = 71.9 \pm 6.8 (\mbox{stat}) \pm 9.3 (\mbox{syst})~μみゅー$b. While the measured cross sections are consistent with theoretical estimates in each $p_T$ bin, the shape of the observed $p_T$ spectrum is softer than the expectation from quantum chromodynamics. The results are unique in $p\bar{p}$ collisions and can improve the shape and uncertainties of future predictions. △ Less

Submitted 27 October, 2016; originally announced October 2016.

Comments: 8 pages, 3 figures

Journal ref: Phys. Rev. D 95, 092006 (2017)

Design and status of the Mu2e electromagnetic calorimeter

Authors: N. Atanov, V. Baranov, J. Budagov, R. Carosi, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, E. Dane', Yu. I. Davydov, S. Di Falco, S. Donati, R. Donghia, B. Echenard, K. Flood, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat , et al. (11 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab aims at measuring the neutrinoless conversion of a negative muon into an electron and reach a single event sensitivity of 2.5x10^{-17} after three years of data taking. The monoenergetic electron produced in the final state, is detected by a high precision tracker and a crystal calorimeter, all embedded in a large superconducting solenoid (SD) surrounded by a cosmic… ▽ More The Mu2e experiment at Fermilab aims at measuring the neutrinoless conversion of a negative muon into an electron and reach a single event sensitivity of 2.5x10^{-17} after three years of data taking. The monoenergetic electron produced in the final state, is detected by a high precision tracker and a crystal calorimeter, all embedded in a large superconducting solenoid (SD) surrounded by a cosmic ray veto system. The calorimeter is complementary to the tracker, allowing an independent trigger and powerful particle identification, while seeding the track reconstruction and contributing to remove background tracks mimicking the signal. In order to match these requirements, the calorimeter should have an energy resolution of O(5)% and a time resolution better than 500 ps at 100 MeV. The baseline solution is a calorimeter composed of two disks of BaF2 crystals read by UV extended, solar blind, Avalanche Photodiode (APDs), which are under development from a JPL, Caltech, RMD consortium. In this paper, the calorimeter design, the R&D studies carried out so far and the status of engineering are described. A backup alternative setup consisting of a pure CsI crystal matrix read by UV extended Hamamatsu MPPC's is also presented. △ Less

Submitted 8 August, 2016; originally announced August 2016.

Comments: 5 pages, 6 figures

Journal ref: Nucl. Instrum. Meth. A 824 (2016) 695

Radiation hardness test of un-doped CsI crystals and Silicon Photomultipliers for the Mu2e calorimeter

Authors: Stefania Baccaro, Alessia Cemmi, Marco Cordelli, Eleonora Diociaiuti, Raffaella Donghia, Simona Giovannella, Stefano Loreti, Stefano Miscetti, Mario Pillon, Ivano Sarra

Abstract: The Mu2e calorimeter is composed by 1400 un-doped CsI crystals coupled to large area UV extended Silicon Photomultipliers arranged in two annular disks. This calorimeter has to provide precise information on energy, timing and position. It should also be fast enough to handle the high rate background and it must operate and survive in a high radiation environment. Simulation studies estimated that… ▽ More The Mu2e calorimeter is composed by 1400 un-doped CsI crystals coupled to large area UV extended Silicon Photomultipliers arranged in two annular disks. This calorimeter has to provide precise information on energy, timing and position. It should also be fast enough to handle the high rate background and it must operate and survive in a high radiation environment. Simulation studies estimated that, in the hottest regions, each crystal will absorb a dose of 300 Gy and will be exposed to a neutron fluency of 6 x 10^{11} n/cm^2 in 3 years of running. Test of un-doped CsI crystals irradiated up to 900 Gy and to a neutron fluency up to 9 x 10^{11} n/cm^2 have been performed at CALLIOPE and FNG ENEA facilities in Italy. We present our study on the variation of light yield (LY) and longitudinal response uniformity (LRU) of these crystals after irradiation. The ionization dose does not modify LRU while a 20% reduction in LY is observed at 900 Gy. Similarly, the neutron flux causes an acceptable LY deterioration (<15%). A neutron irradiation test on different types of SIPMs (two different array models from Hamamatsu and one from FBK) have also been carried out by measuring the variation of the leakage current and the charge response to an ultraviolet led. We concluded that, in the experiment, we will need to cool down the SIPMs to 0 C reduce the leakage current to an acceptable level. △ Less

Submitted 23 June, 2016; originally announced June 2016.

Comments: Presented at CALOR 2016, 15-20 May. Submitted to Journal of Physics: Conference Series (JPCS)

Longitudinal uniformity, time performance and irradiation test of pure CsI crystals

Authors: M. Angelucci, O. Atanova, S. Baccaro, A. Cemmi, M. Cordelli, R. Donghia, S. Giovannella, F. Happacher, S. Miscetti, I. Sarra, S. R. Soleti

Abstract: To study an alternative to BaF2, as the crystal choice for the Mu2e calorimeter, thirteen pure CsI crystals from Opto Materials and ISMA producers have been characterized by determining their light yield (LY) and longitudinal response uniformity (LRU), when read with a UV extended PMT. The crystals show a LY of ~ 100 p.e./MeV (~ 150 p.e./MeV) when wrapped with Tyvek and coupled to the PMT without… ▽ More To study an alternative to BaF2, as the crystal choice for the Mu2e calorimeter, thirteen pure CsI crystals from Opto Materials and ISMA producers have been characterized by determining their light yield (LY) and longitudinal response uniformity (LRU), when read with a UV extended PMT. The crystals show a LY of ~ 100 p.e./MeV (~ 150 p.e./MeV) when wrapped with Tyvek and coupled to the PMT without (with) optical grease. The LRU is well represented by a linear slope that is on average around -0.6 %/cm. The timing performances of the Opto Materials crystal, read with a UV extended MPPC, have been evaluated with minimum ionizing particles. A timing resolution of ~ 330 ps (~ 440 ps) is achieved when connecting the photosensor to the MPPC with (without) optical grease. The crystal radiation hardness to a ionization dose has also been studied for one pure CsI crystal from SICCAS. After exposing it to a dose of 900 Gy, a decrease of 33% in the LY is observed while the LRU remains unchanged. △ Less

Submitted 21 June, 2016; originally announced June 2016.

Comments: Presented at Frontier Detectors for Frontier Physics,13th Pisa Meeting on Advanced Detectors, 24-30 May 2015 (2 pages, 4 figures)

Journal ref: NIMA58284, Nuclear Inst. and Methods in Physics Research, A (2016), pp. 678-680

Measurement of the $WW$ and $WZ$ production cross section using final states with a charged lepton and heavy-flavor jets in the full CDF Run II data set

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: We present a measurement of the total {\it WW} and {\it WZ} production cross sections in $p\bar{p}$ collision at $\sqrt{s}=1.96$ TeV, in a final state consistent with leptonic $W$ boson decay and jets originating from heavy-flavor quarks from either a $W$ or a $Z$ boson decay. This analysis uses the full data set collected with the CDF II detector during Run II of the Tevatron collider, correspond… ▽ More We present a measurement of the total {\it WW} and {\it WZ} production cross sections in $p\bar{p}$ collision at $\sqrt{s}=1.96$ TeV, in a final state consistent with leptonic $W$ boson decay and jets originating from heavy-flavor quarks from either a $W$ or a $Z$ boson decay. This analysis uses the full data set collected with the CDF II detector during Run II of the Tevatron collider, corresponding to an integrated luminosity of 9.4 fb$^{-1}$. An analysis of the dijet mass spectrum provides $3.7σしぐま$ evidence of the summed production processes of either {\it WW} or {\it WZ} bosons with a measured total cross section of $σしぐま_{WW+WZ} = 13.7\pm 3.9$~pb. Independent measurements of the {\it WW} and {\it WZ} production cross sections are allowed by the different heavy-flavor decay-patterns of the $W$ and $Z$ bosons and by the analysis of secondary-decay vertices reconstructed within heavy-flavor jets. The productions of {\it WW} and of {\it WZ} dibosons are independently seen with significances of $2.9σしぐま$ and $2.1σしぐま$, respectively, with total cross sections of $σしぐま_{WW}= 9.4\pm 4.2$~pb and $σしぐま_{WZ}=3.7^{+2.5}_{-2.2}$~pb. The measurements are consistent with standard-model predictions. △ Less

Submitted 31 July, 2016; v1 submitted 22 June, 2016; originally announced June 2016.

Comments: 19 pages, 11 figures, accepted for publication on Physical Review D

Report number: FERMILAB-PUB-16-229-E

Journal ref: Phys. Rev. D 94, 032008 (2016)

Design, status and test of the Mu2e crystal calorimeter

Authors: N. Atanov, V. Baranov, J. Budagov, R. Carosi, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, E. Danè, Y. I. Davydov, S. Di Falco, S. Donati, R. Donghia, B. Echenard, K. Flood, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat , et al. (11 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab searches for the charged-lepton flavor violating neutrino-less conversion of a negative muon into an electron in the field of a aluminum nucleus. The dynamic of such a process is well modeled by a two-body decay, resulting in a monoenergetic electron with an energy slightly below the muon rest mass (104.967 MeV). The calorimeter of this experiment plays an important… ▽ More The Mu2e experiment at Fermilab searches for the charged-lepton flavor violating neutrino-less conversion of a negative muon into an electron in the field of a aluminum nucleus. The dynamic of such a process is well modeled by a two-body decay, resulting in a monoenergetic electron with an energy slightly below the muon rest mass (104.967 MeV). The calorimeter of this experiment plays an important role to provide excellent particle identification capabilities and an online trigger filter while aiding the track reconstruction capabilities. The baseline calorimeter configuration consists of two disks each made with about 700 undoped CsI crystals read out by two large area UV-extended Silicon Photomultipliers. These crystals match the requirements for stability of response, high resolution and radiation hardness. In this paper we present the final calorimeter design. △ Less

Submitted 1 July, 2016; v1 submitted 17 June, 2016; originally announced June 2016.

Energy and time resolution for a LYSO matrix prototype of the Mu2e experiment

Authors: N. Atanov, V. Baranov, F. Colao, M. Cordelli, G. Corradi, E. Dane`, Y. I. Davydov, K. Flood, S. Giovannella, V. Glagolev, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Ott, G. Pezzullo, A. Saputi, I. Sarra, S. R. Soleti, G. Tassielli, V. Tereshchenko, A. Thomas

Abstract: We have measured the performances of a LYSO crystal matrix prototype tested with electron and photon beams in the energy range 60$-$450 MeV. This study has been carried out to determine the achievable energy and time resolutions for the calorimeter of the Mu2e experiment. We have measured the performances of a LYSO crystal matrix prototype tested with electron and photon beams in the energy range 60$-$450 MeV. This study has been carried out to determine the achievable energy and time resolutions for the calorimeter of the Mu2e experiment. △ Less

Submitted 30 May, 2016; originally announced May 2016.

Comments: 2 pages, 3 figures, 13th Pisa Meeting on Advanced Detectors

Journal ref: Nucl. Instr. Meth. A 824 (2016) 684

Measurement of $\sin^2θしーた^{\rm lept}_{\rm eff}$ using $e^+e^-$ pairs from $γがんま^*/Z$ bosons produced in $p\bar{p}$ collisions at a center-of-momentum energy of 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (372 additional authors not shown)

Abstract: At the Fermilab Tevatron proton-antiproton ($p\bar{p}$) collider, Drell-Yan lepton pairs are produced in the process $p \bar{p} \rightarrow e^+e^- + X$ through an intermediate $γがんま^*/Z$ boson. The forward-backward asymmetry in the polar-angle distribution of the $e^-$ as a function of the $e^+e^-$-pair mass is used to obtain $\sin^2θしーた^{\rm lept}_{\rm eff}$, the effective leptonic determination of the… ▽ More At the Fermilab Tevatron proton-antiproton ($p\bar{p}$) collider, Drell-Yan lepton pairs are produced in the process $p \bar{p} \rightarrow e^+e^- + X$ through an intermediate $γがんま^*/Z$ boson. The forward-backward asymmetry in the polar-angle distribution of the $e^-$ as a function of the $e^+e^-$-pair mass is used to obtain $\sin^2θしーた^{\rm lept}_{\rm eff}$, the effective leptonic determination of the electroweak-mixing parameter $\sin^2θしーた_W$. The measurement sample, recorded by the Collider Detector at Fermilab (CDF), corresponds to 9.4~fb$^{-1}$ of integrated luminosity from $p\bar{p}$ collisions at a center-of-momentum energy of 1.96 TeV, and is the full CDF Run II data set. The value of $\sin^2θしーた^{\rm lept}_{\rm eff}$ is found to be $0.23248 \pm 0.00053$. The combination with the previous CDF measurement based on $μみゅー^+μみゅー^-$ pairs yields $\sin^2θしーた^{\rm lept}_{\rm eff} = 0.23221 \pm 0.00046$. This result, when interpreted within the specified context of the standard model assuming $\sin^2 θしーた_W = 1 - M_W^2/M_Z^2$ and that the $W$- and $Z$-boson masses are on-shell, yields $\sin^2θしーた_W = 0.22400 \pm 0.00045$, or equivalently a $W$-boson mass of $80.328 \pm 0.024 \;{\rm GeV}/c^2$. △ Less

Submitted 10 June, 2016; v1 submitted 9 May, 2016; originally announced May 2016.

Report number: FERMILAB-PUB-16-165-E

Journal ref: Phys. Rev. D 93, 112016 (2016)

Measurement of the forward-backward asymmetry of top-quark and antiquark pairs using the full CDF Run II data set

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (372 additional authors not shown)

Abstract: We measure the forward--backward asymmetry of the production of top quark and antiquark pairs in proton-antiproton collisions at center-of-mass energy $\sqrt{s} = 1.96~\mathrm{TeV}$ using the full data set collected by the Collider Detector at Fermilab (CDF) in Tevatron Run II corresponding to an integrated luminosity of $9.1~\rm{fb}^{-1}$. The asymmetry is characterized by the rapidity difference… ▽ More We measure the forward--backward asymmetry of the production of top quark and antiquark pairs in proton-antiproton collisions at center-of-mass energy $\sqrt{s} = 1.96~\mathrm{TeV}$ using the full data set collected by the Collider Detector at Fermilab (CDF) in Tevatron Run II corresponding to an integrated luminosity of $9.1~\rm{fb}^{-1}$. The asymmetry is characterized by the rapidity difference between top quarks and antiquarks ($Δでるたy$), and measured in the final state with two charged leptons (electrons and muons). The inclusive asymmetry, corrected to the entire phase space at parton level, is measured to be $A_{\text{FB}}^{t\bar{t}} = 0.12 \pm 0.13$, consistent with the expectations from the standard-model (SM) and previous CDF results in the final state with a single charged lepton. The combination of the CDF measurements of the inclusive $A_{\text{FB}}^{t\bar{t}}$ in both final states yields $A_{\text{FB}}^{t\bar{t}}=0.160\pm0.045$, which is consistent with the SM predictions. We also measure the differential asymmetry as a function of $Δでるたy$. A linear fit to $A_{\text{FB}}^{t\bar{t}}(|Δでるたy|)$, assuming zero asymmetry at $Δでるたy=0$, yields a slope of $αあるふぁ=0.14\pm0.15$, consistent with the SM prediction and the previous CDF determination in the final state with a single charged lepton. The combined slope of $A_{\text{FB}}^{t\bar{t}}(|Δでるたy|)$ in the two final states is $αあるふぁ=0.227\pm0.057$, which is $2.0σしぐま$ larger than the SM prediction. △ Less

Submitted 29 February, 2016; originally announced February 2016.

Comments: To be submitted to Phys. Rev. D

Report number: FERMILAB-PUB-16-045-E

Journal ref: Phys. Rev. D 93, 112005 (2016)

Letter of Intent for KM3NeT 2.0

Authors: S. Adrián-Martínez, M. Ageron, F. Aharonian, S. Aiello, A. Albert, F. Ameli, E. Anassontzis, M. Andre, G. Androulakis, M. Anghinolfi, G. Anton, M. Ardid, T. Avgitas, G. Barbarino, E. Barbarito, B. Baret, J. Barrios-Martí, B. Belhorma, A. Belias, E. Berbee, A. van den Berg, V. Bertin, S. Beurthey, V. van Beveren, N. Beverini , et al. (222 additional authors not shown)

Abstract: The main objectives of the KM3NeT Collaboration are i) the discovery and subsequent observation of high-energy neutrino sources in the Universe and ii) the determination of the mass hierarchy of neutrinos. These objectives are strongly motivated by two recent important discoveries, namely: 1) The high-energy astrophysical neutrino signal reported by IceCube and 2) the sizable contribution of elect… ▽ More The main objectives of the KM3NeT Collaboration are i) the discovery and subsequent observation of high-energy neutrino sources in the Universe and ii) the determination of the mass hierarchy of neutrinos. These objectives are strongly motivated by two recent important discoveries, namely: 1) The high-energy astrophysical neutrino signal reported by IceCube and 2) the sizable contribution of electron neutrinos to the third neutrino mass eigenstate as reported by Daya Bay, Reno and others. To meet these objectives, the KM3NeT Collaboration plans to build a new Research Infrastructure consisting of a network of deep-sea neutrino telescopes in the Mediterranean Sea. A phased and distributed implementation is pursued which maximises the access to regional funds, the availability of human resources and the synergetic opportunities for the earth and sea sciences community. Three suitable deep-sea sites are identified, namely off-shore Toulon (France), Capo Passero (Italy) and Pylos (Greece). The infrastructure will consist of three so-called building blocks. A building block comprises 115 strings, each string comprises 18 optical modules and each optical module comprises 31 photo-multiplier tubes. Each building block thus constitutes a 3-dimensional array of photo sensors that can be used to detect the Cherenkov light produced by relativistic particles emerging from neutrino interactions. Two building blocks will be configured to fully explore the IceCube signal with different methodology, improved resolution and complementary field of view, including the Galactic plane. One building block will be configured to precisely measure atmospheric neutrino oscillations. △ Less

Submitted 26 July, 2016; v1 submitted 27 January, 2016; originally announced January 2016.

Comments: 119 pages, published version, revised Eq. 6, 7

Journal ref: Journal of Physics G: Nuclear and Particle Physics, 43 (8), 084001, 2016

Measurement of the forward-backward asymmetry in low-mass bottom-quark pairs produced in proton-antiproton collisions

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (373 additional authors not shown)

Abstract: We report a measurement of the forward-backward asymmetry, $A_{FB}$, in $b\bar{b}$ pairs produced in proton-antiproton collisions and identified by muons from semileptonic $b$-hadron decays. The event sample was collected at a center-of-mass energy of $\sqrt{s}=1.96$ TeV with the CDF II detector and corresponds to 6.9 fb$^{-1}$ of integrated luminosity. We obtain an integrated asymmetry of… ▽ More We report a measurement of the forward-backward asymmetry, $A_{FB}$, in $b\bar{b}$ pairs produced in proton-antiproton collisions and identified by muons from semileptonic $b$-hadron decays. The event sample was collected at a center-of-mass energy of $\sqrt{s}=1.96$ TeV with the CDF II detector and corresponds to 6.9 fb$^{-1}$ of integrated luminosity. We obtain an integrated asymmetry of $A_{FB}(b\bar{b})=(1.2 \pm 0.7)$\% at the particle level for $b$-quark pairs with invariant mass, $m_{b\bar{b}}$, down to $40$ GeV/$c^2$ and measure the dependence of $A_{FB}(b\bar{b})$ on $m_{b\bar{b}}$. The results are compatible with expectations from the standard model. △ Less

Submitted 25 January, 2016; originally announced January 2016.

Comments: submitted to Phys. Rev. D

Report number: FERMILAB-PUB-16-017-E

Measurement of the $B_c^{\pm}$ production cross section in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: We describe a measurement of the ratio of the cross sections times branching fractions of the $B_c^+$ meson in the decay mode $B_c^+ \rightarrow J/ψぷさいμみゅーνにゅー$ to the $B^+$ meson in the decay mode $B^+ \rightarrow J/ψぷさいK^+$ in proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV. The measurement is based on the complete CDF Run II data set, which comes from an integrated luminosity of… ▽ More We describe a measurement of the ratio of the cross sections times branching fractions of the $B_c^+$ meson in the decay mode $B_c^+ \rightarrow J/ψぷさいμみゅーνにゅー$ to the $B^+$ meson in the decay mode $B^+ \rightarrow J/ψぷさいK^+$ in proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV. The measurement is based on the complete CDF Run II data set, which comes from an integrated luminosity of $8.7\,{\rm fb}^{-1}$. The ratio of the production cross sections times branching fractions for $B_c^+$ and $B_c^+$ mesons with momentum transverse to the beam greater than $6~\textrm{GeV}/c$ and rapidity magnitude smaller than 0.6 is $0.211\pm 0.012~\mbox{(stat)}^{+0.021}_{-0.020}~\mbox{(syst)}$. Using the known $B^+ \rightarrow J/ψぷさいK^+$ branching fraction, the known $B^+$ production cross section, and a selection of the predicted $B_c^+ \rightarrow J/ψぷさいμみゅーνにゅー$ branching fractions, the range for the total $B_c^+$ production cross section is estimated. △ Less

Submitted 26 March, 2016; v1 submitted 15 January, 2016; originally announced January 2016.

Comments: 28 pages, 25 figures, and 20 tables. This version is consistent with paper published in Phys. Rev. D on March 1, 2016

Report number: FERMILAB-PUB-16-008-E-PPD

Journal ref: Phys. Rev. D 93, 052001 (2016)

Search for a Low-Mass Neutral Higgs Boson with Suppressed Couplings to Fermions Using Events with Multiphoton Final States

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (373 additional authors not shown)

Abstract: A search for a Higgs boson with suppressed couplings to fermions, $h_f$, assumed to be the neutral, lower-mass partner of the Higgs boson discovered at the Large Hadron Collider, is reported. Such a Higgs boson could exist in extensions of the standard model with two Higgs doublets, and could be produced via $p\bar{p} \to H^\pm h_f \to W^* h_f h_f \to 4γがんま+ X$, where $H^\pm$ is a charged Higgs boson… ▽ More A search for a Higgs boson with suppressed couplings to fermions, $h_f$, assumed to be the neutral, lower-mass partner of the Higgs boson discovered at the Large Hadron Collider, is reported. Such a Higgs boson could exist in extensions of the standard model with two Higgs doublets, and could be produced via $p\bar{p} \to H^\pm h_f \to W^* h_f h_f \to 4γがんま+ X$, where $H^\pm$ is a charged Higgs boson. This analysis uses all events with at least three photons in the final state from proton-antiproton collisions at a center-of-mass energy of 1.96~TeV collected by the Collider Detector at Fermilab, corresponding to an integrated luminosity of 9.2~${\rm fb}^{-1}$. No evidence of a signal is observed in the data. Values of Higgs-boson masses between 10 and 100 GeV/$c^2$ are excluded at 95\% Bayesian credibility. △ Less

Submitted 4 January, 2016; originally announced January 2016.

Comments: Submitted to Phys. Rev. Lett

Report number: FERMILAB-PUB-15-578-E

Journal ref: Phys. Rev. D 93, 112010 (2016)

Measurement of time resolution of the Mu2e LYSO calorimeter prototype

Authors: N. Atanov, V. Baranov, F. Colao, M. Cordelli, G. Corradi, E. Dané, Yu. I. Davydov, K. Flood, S. Giovannella, V. Glagolev, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, G. Pezzullo, A. Saputi, I. Sarra, S. R. Soleti, G. Tassielli, V. Tereshchenko

Abstract: In this paper we present the time resolution measurements of the Lutetium-Yttrium Oxyorthosilicate (LYSO) calorimeter prototype for the Mu2e experiment. The measurements have been performed using the $e^-$ beam of the Beam Test Facility (BTF) in Frascati, Italy in the energy range from 100 to 400 MeV. The calorimeter prototype consisted of twenty five 30x30x130 mm$^3$, LYSO crystals read out by 10… ▽ More In this paper we present the time resolution measurements of the Lutetium-Yttrium Oxyorthosilicate (LYSO) calorimeter prototype for the Mu2e experiment. The measurements have been performed using the $e^-$ beam of the Beam Test Facility (BTF) in Frascati, Italy in the energy range from 100 to 400 MeV. The calorimeter prototype consisted of twenty five 30x30x130 mm$^3$, LYSO crystals read out by 10x10 mm$^2$ Hamamatsu Avalanche Photodiodes (APDs). The energy dependence of the measured time resolution can be parametrized as $σしぐま_{t}(E)=a/\sqrt{E/\mathrm{GeV}} \oplus b$, with the stochastic and constant terms $a=(51\pm1)$ ps and $b=(10\pm4)$ ps, respectively. This corresponds to the time resolution of ($162\pm4$) ps at 100 MeV. △ Less

Submitted 11 January, 2016; v1 submitted 15 September, 2015; originally announced September 2015.

Comments: 18 pages, 14 figures, accepted for the journal Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

Report number: FERMILAB-TM-2611-E

Journal ref: Nucl.Instrum.Meth. A812 (2016) 104-111

Measurement of vector boson plus $D^{*}(2010)^+$ meson production in $\bar{p}p$ collisions at $\sqrt{s}=1.96\, {\rm TeV}$

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (378 additional authors not shown)

Abstract: A measurement of vector boson ($V$) production in conjunction with a $D^{*}(2010)^+$ meson is presented. Using a data sample corresponding to $9.7\, {\rm fb}^{-1}$ of ^Mproton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96\rm~ TeV$ produced by the Fermilab Tevatron, we reconstruct $V+D^{*+}$ samples with the CDF~II detector. The $D^{*+}$ is fully reconstructed in the… ▽ More A measurement of vector boson ($V$) production in conjunction with a $D^{*}(2010)^+$ meson is presented. Using a data sample corresponding to $9.7\, {\rm fb}^{-1}$ of ^Mproton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96\rm~ TeV$ produced by the Fermilab Tevatron, we reconstruct $V+D^{*+}$ samples with the CDF~II detector. The $D^{*+}$ is fully reconstructed in the $D^{*}(2010)^+ \rightarrow D^{0}(\to K^-πぱい^+)πぱい^+$ decay mode. This technique is sensitive to the associated production of vector boson plus charm or bottom mesons. We measure the ratio of production cross sections $σしぐま(W+D^{*})/σしぐま(W)$ = $[1.75\pm 0.13 {\rm (stat)}\pm 0.09 {\rm (syst)}]\% $ and $σしぐま(Z+D^{*})/σしぐま(Z)$ = $[1.5\pm 0.4 {\rm (stat)} \pm 0.2 {\rm (syst)}]\% $ and perform a differential measurement of $dσしぐま(W+D^{*})/dp_T(D^{*})$. Event properties are utilized to determine the fraction of $V+D^{*}(2010)^+$ events originating from different production processes. The results are in agreement with the predictions obtained with the {\sc pythia} program, limiting possible contribution from non-standard-model physics processes. △ Less

Submitted 22 March, 2016; v1 submitted 27 August, 2015; originally announced August 2015.

Report number: FERMILAB-PUB-15-368

Journal ref: Phys. Rev. D 93, 052012 (2016)

A Study of the Energy Dependence of the Underlying Event in Proton-Antiproton Collisions

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, M. Albrow, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (379 additional authors not shown)

Abstract: We study charged particle production in proton-antiproton collisions at 300 GeV, 900 GeV, and 1.96 TeV. We use the direction of the charged particle with the largest transverse momentum in each event to define three regions of eta-phi space; toward, away, and transverse. The average number and the average scalar pT sum of charged particles in the transverse region are sensitive to the modeling of… ▽ More We study charged particle production in proton-antiproton collisions at 300 GeV, 900 GeV, and 1.96 TeV. We use the direction of the charged particle with the largest transverse momentum in each event to define three regions of eta-phi space; toward, away, and transverse. The average number and the average scalar pT sum of charged particles in the transverse region are sensitive to the modeling of the underlying event. The transverse region is divided into a MAX and MIN transverse region, which helps separate the hard component (initial and final-state radiation) from the beam-beam remnant and multiple parton interaction components of the scattering. The center-of-mass energy dependence of the various components of the event are studied in detail. The data presented here can be used to constrain and improve QCD Monte Carlo models, resulting in more precise predictions at the LHC energies of 13 and 14 TeV. △ Less

Submitted 27 August, 2015; v1 submitted 21 August, 2015; originally announced August 2015.

Comments: 24 pages, 19 figures, to be submitted to Phys. Rev. D

Report number: FERMILAB-PUB-15-361-E

Journal ref: Phys. Rev. D 92, 092009 (2015)

Measurement of the production and differential cross sections of $W^{+}W^{-}$ bosons in association with jets in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (378 additional authors not shown)

Abstract: We present a measurement of the $W$-boson-pair production cross section in $p\bar{p}$ collisions at 1.96 TeV center-of-mass energy and the first measurement of the differential cross section as a function of jet multiplicity and leading-jet energy. The $W^{+}W^{-}$ cross section is measured in the final state comprising two charged leptons and neutrinos, where either charged lepton can be an elect… ▽ More We present a measurement of the $W$-boson-pair production cross section in $p\bar{p}$ collisions at 1.96 TeV center-of-mass energy and the first measurement of the differential cross section as a function of jet multiplicity and leading-jet energy. The $W^{+}W^{-}$ cross section is measured in the final state comprising two charged leptons and neutrinos, where either charged lepton can be an electron or a muon. Using data collected by the CDF experiment corresponding to $9.7~\rm{fb}^{-1}$ of integrated luminosity, a total of $3027$ collision events consistent with $W^{+}W^{-}$ production are observed with an estimated background contribution of $1790\pm190$ events. The measured total cross section is $σしぐま(p\bar{p} \rightarrow W^{+}W^{-}) = 14.0 \pm 0.6~(\rm{stat})^{+1.2}_{-1.0}~(\rm{syst})\pm0.8~(\rm{lumi})$ pb, consistent with the standard model prediction. △ Less

Submitted 23 June, 2015; v1 submitted 4 May, 2015; originally announced May 2015.

Report number: FERMILAB-PUB-15-191-PPD

Journal ref: Phys. Rev. D 91, 111101 (2015)

Measurement of the top-quark mass in the ${t\bar{t}}$ dilepton channel using the full CDF Run II data set

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (378 additional authors not shown)

Abstract: We present a measurement of the top-quark mass in events containing two leptons (electrons or muons) with a large transverse momentum, two or more energetic jets, and a transverse-momentum imbalance. We use the full proton-antiproton collision data set collected by the CDF experiment during the Fermilab Tevatron Run~II at center-of-mass energy $\sqrt{s} = 1.96$ TeV, corresponding to an integrated… ▽ More We present a measurement of the top-quark mass in events containing two leptons (electrons or muons) with a large transverse momentum, two or more energetic jets, and a transverse-momentum imbalance. We use the full proton-antiproton collision data set collected by the CDF experiment during the Fermilab Tevatron Run~II at center-of-mass energy $\sqrt{s} = 1.96$ TeV, corresponding to an integrated luminosity of 9.1 fb$^{-1}$. A special observable is exploited for an optimal reduction of the dominant systematic uncertainty, associated with the knowledge of the absolute energy of the hadronic jets. The distribution of this observable in the selected events is compared to simulated distributions of ${t\bar{t}}$ dilepton signal and background.We measure a value for the top-quark mass of $171.5\pm 1.9~{\rm (stat)}\pm 2.5~{\rm (syst)}$ GeV/$c^2$. △ Less

Submitted 20 June, 2015; v1 submitted 3 May, 2015; originally announced May 2015.

Comments: Submitted to Phys. Rev. D, 11 pages, 5 figures and 2 tables

Report number: FERMILAB-PUB-15-190-E

Journal ref: Phys. Rev. D 92, 032003 (2015)

First measurement of the forward-backward asymmetry in bottom-quark pair production at high mass

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (378 additional authors not shown)

Abstract: We measure the particle-level forward-backward production asymmetry in $b\bar{b}$ pairs with masses $m(b\bar{b})$ larger than 150 GeV/$c^2$, using events with hadronic jets and employing jet charge to distinguish $b$ from $\bar{b}$. The measurement uses 9.5/fb of ppbar collisions at a center of mass energy of 1.96 TeV recorded by the CDF II detector. The asymmetry as a function of $m(b\bar{b})$ is… ▽ More We measure the particle-level forward-backward production asymmetry in $b\bar{b}$ pairs with masses $m(b\bar{b})$ larger than 150 GeV/$c^2$, using events with hadronic jets and employing jet charge to distinguish $b$ from $\bar{b}$. The measurement uses 9.5/fb of ppbar collisions at a center of mass energy of 1.96 TeV recorded by the CDF II detector. The asymmetry as a function of $m(b\bar{b})$ is consistent with zero, as well as with the predictions of the standard model. The measurement disfavors a simple model including an axigluon with a mass of 200 GeV/$c^2$ whereas a model containing a heavier 345 GeV/$c^2$ axigluon is not excluded. △ Less

Submitted 26 April, 2015; originally announced April 2015.

Comments: 11 pages, for submission to Physical Review D

Report number: FERMILAB-PUB-15-153-E

Journal ref: Phys. Rev. D 92, 032006 (2015)

Search for Resonances Decaying to Top and Bottom Quarks with the CDF Experiment

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, F. Anza', G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (380 additional authors not shown)

Abstract: We report on a search for charged massive resonances decaying to top ($t$) and bottom ($b$) quarks in the full data set of proton-antiproton collisions at center-of-mass energy of $\sqrt{s} = 1.96$ TeV collected by the CDF~II detector at the Tevatron, corresponding to an integrated luminosity of 9.5 $fb^{-1}$. No significant excess above the standard model (SM) background prediction is observed. W… ▽ More We report on a search for charged massive resonances decaying to top ($t$) and bottom ($b$) quarks in the full data set of proton-antiproton collisions at center-of-mass energy of $\sqrt{s} = 1.96$ TeV collected by the CDF~II detector at the Tevatron, corresponding to an integrated luminosity of 9.5 $fb^{-1}$. No significant excess above the standard model (SM) background prediction is observed. We set 95% Bayesian credibility mass-dependent upper limits on the heavy charged particle production cross section times branching ratio to $t b$. Using a SM extension with a $W^{\prime}$ and left-right-symmetric couplings as a benchmark model, we constrain the $W^{\prime}$ mass and couplings in the 300 to 900 GeV/$c^2$ range. The limits presented here are the most stringent for a charged resonance with mass in the range 300 -- 600 GeV/$c^2$ decaying to top and bottom quarks. △ Less

Submitted 7 April, 2015; originally announced April 2015.

Comments: submitted to Phys. Rev. Lett

Report number: FERMILAB-PUB-15-123-PPD

Journal ref: Phys. Rev. Lett. 115, 061801 (2015)

Measurement of central exclusive pi+pi- production in p-pbar collisions at sqrt(s) = 0.9 and 1.96 TeV at CDF

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (381 additional authors not shown)

Abstract: We measure exclusive $πぱい^+πぱい^-$ production in proton-antiproton collisions at center-of-mass energies $\sqrt{s}$ = 0.9 and 1.96 TeV in the Collider Detector at Fermilab. We select events with two oppositely charged particles, assumed to be pions, with pseudorapidity $|ηいーた| < 1.3$ and with no other particles detected in $|ηいーた| < 5.9$. We require the $πぱい^+πぱい^-$ system to have rapidity $|y|<$ 1.0. The produc… ▽ More We measure exclusive $πぱい^+πぱい^-$ production in proton-antiproton collisions at center-of-mass energies $\sqrt{s}$ = 0.9 and 1.96 TeV in the Collider Detector at Fermilab. We select events with two oppositely charged particles, assumed to be pions, with pseudorapidity $|ηいーた| < 1.3$ and with no other particles detected in $|ηいーた| < 5.9$. We require the $πぱい^+πぱい^-$ system to have rapidity $|y|<$ 1.0. The production mechanism of these events is expected to be dominated by double pomeron exchange, which constrains the quantum numbers of the central state. The data are potentially valuable for isoscalar meson spectroscopy and for understanding the pomeron in a region of transition between nonperturbative and perturbative quantum chromodynamics. The data extend up to dipion mass $M(πぱい^+πぱい^-)$ = 5000 MeV/$c^2$ and show resonance structures attributed to $f_0$ and $f_2(1270)$ mesons. From the $πぱい^+πぱい^-$ and $K^+K^-$ spectra, we place upper limits on exclusive $χかい_{c0}(3415)$ production. △ Less

Submitted 11 June, 2015; v1 submitted 4 February, 2015; originally announced February 2015.

Comments: 7 pages, 4 figures, Minor modifications to the text based on the feedback from the journal referee

Report number: FERMILAB-PUB-15-033-PPD

Journal ref: Phys. Rev. D 91, 091101 (2015)

Mu2e Technical Design Report

Authors: L. Bartoszek, E. Barnes, J. P. Miller, J. Mott, A. Palladino, J. Quirk, B. L. Roberts, J. Crnkovic, V. Polychronakos, V. Tishchenko, P. Yamin, C. -h. Cheng, B. Echenard, K. Flood, D. G. Hitlin, J. H. Kim, T. S. Miyashita, F. C. Porter, M. Röhrken, J. Trevor, R. -Y. Zhu, E. Heckmaier, T. I. Kang, G. Lim, W. Molzon , et al. (238 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the L… ▽ More The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the preliminary design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2 approval. △ Less

Submitted 16 March, 2015; v1 submitted 21 January, 2015; originally announced January 2015.

Comments: compressed file, 888 pages, 621 figures, 126 tables; full resolution available at http://mu2e.fnal.gov; corrected typo in background summary, Table 3.4

Report number: Fermilab-TM-2594 , Fermilab-DESIGN-2014-1

Measurement of indirect CP-violating asymmetries in $D^0\to K^+K^-$ and $D^0\to πぱい^+πぱい^-$ decays at CDF

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (377 additional authors not shown)

Abstract: We report a measurement of the indirect CP-violating asymmetries ($A_Γがんま$) between effective lifetimes of anticharm and charm mesons reconstructed in $D^0\to K^+ K^-$ and $D^0\to πぱい^+πぱい^-$ decays. We use the full data set of proton-antiproton collisions collected by the Collider Detector at Fermilab experiment and corresponding to $9.7$~fb$^{-1}$ of integrated luminosity. The strong-interaction decay… ▽ More We report a measurement of the indirect CP-violating asymmetries ($A_Γがんま$) between effective lifetimes of anticharm and charm mesons reconstructed in $D^0\to K^+ K^-$ and $D^0\to πぱい^+πぱい^-$ decays. We use the full data set of proton-antiproton collisions collected by the Collider Detector at Fermilab experiment and corresponding to $9.7$~fb$^{-1}$ of integrated luminosity. The strong-interaction decay $D^{*+}\to D^0πぱい^+$ is used to identify the meson at production as $D^0$ or $\overline{D}^0$. We statistically subtract $D^0$ and $\overline{D}^0$ mesons originating from $b$-hadron decays and measure the yield asymmetry between anticharm and charm decays as a function of decay time. We measure $A_Γがんま(K^+K^-) = (-0.19 \pm 0.15 (stat) \pm 0.04 (syst))\%$ and $A_Γがんま(πぱい^+πぱい^-)= (-0.01 \pm 0.18 (stat) \pm 0.03 (syst))\%$. The results are consistent with the hypothesis of CP symmetry and their combination yields $A_Γがんま= (-0.12 \pm 0.12)\%$. △ Less

Submitted 6 January, 2015; v1 submitted 20 October, 2014; originally announced October 2014.

Comments: 8 pages, 3 figures, version published by Phys. Rev. D

Report number: FERMILAB-PUB-14-429-PPD

Journal ref: Phys. Rev. D 90, 111103 (2014)