Showing 1–12 of 12 results for author: Den, C

Rapid and Accurate Diagnosis of Acute Aortic Syndrome using Non-contrast CT: A Large-scale, Retrospective, Multi-center and AI-based Study

Authors: Yujian Hu, Yilang Xiang, Yan-Jie Zhou, Yangyan He, Shifeng Yang, Xiaolong Du, Chunlan Den, Youyao Xu, Gaofeng Wang, Zhengyao Ding, Jingyong Huang, Wenjun Zhao, Xuejun Wu, Donglin Li, Qianqian Zhu, Zhenjiang Li, Chenyang Qiu, Ziheng Wu, Yunjun He, Chen Tian, Yihui Qiu, Zuodong Lin, Xiaolong Zhang, Yuan He, Zhenpeng Yuan , et al. (15 additional authors not shown)

Abstract: Chest pain symptoms are highly prevalent in emergency departments (EDs), where acute aortic syndrome (AAS) is a catastrophic cardiovascular emergency with a high fatality rate, especially when timely and accurate treatment is not administered. However, current triage practices in the ED can cause up to approximately half of patients with AAS to have an initially missed diagnosis or be misdiagnosed… ▽ More Chest pain symptoms are highly prevalent in emergency departments (EDs), where acute aortic syndrome (AAS) is a catastrophic cardiovascular emergency with a high fatality rate, especially when timely and accurate treatment is not administered. However, current triage practices in the ED can cause up to approximately half of patients with AAS to have an initially missed diagnosis or be misdiagnosed as having other acute chest pain conditions. Subsequently, these AAS patients will undergo clinically inaccurate or suboptimal differential diagnosis. Fortunately, even under these suboptimal protocols, nearly all these patients underwent non-contrast CT covering the aorta anatomy at the early stage of differential diagnosis. In this study, we developed an artificial intelligence model (DeepAAS) using non-contrast CT, which is highly accurate for identifying AAS and provides interpretable results to assist in clinical decision-making. Performance was assessed in two major phases: a multi-center retrospective study (n = 20,750) and an exploration in real-world emergency scenarios (n = 137,525). In the multi-center cohort, DeepAAS achieved a mean area under the receiver operating characteristic curve of 0.958 (95% CI 0.950-0.967). In the real-world cohort, DeepAAS detected 109 AAS patients with misguided initial suspicion, achieving 92.6% (95% CI 76.2%-97.5%) in mean sensitivity and 99.2% (95% CI 99.1%-99.3%) in mean specificity. Our AI model performed well on non-contrast CT at all applicable early stages of differential diagnosis workflows, effectively reduced the overall missed diagnosis and misdiagnosis rate from 48.8% to 4.8% and shortened the diagnosis time for patients with misguided initial suspicion from an average of 681.8 (74-11,820) mins to 68.5 (23-195) mins. DeepAAS could effectively fill the gap in the current clinical workflow without requiring additional tests. △ Less

Submitted 16 July, 2024; v1 submitted 13 June, 2024; originally announced June 2024.

IMF shape constraints from stellar populations and dynamics from CALIFA

Authors: M. Lyubenova, I. Martín-Navarro, G. van de Ven, J. Falcón-Barroso, L. Galbany, A. Gallazzi, R. García-Benito, R. González Delgado, B. Husemann, F. La Barbera, R. A. Marino, D. Mast, J. Mendez-Abreu, R. F. P. Peletier, P. Sánchez-Blázquez, S. F. Sánchez, S. C. Trager, R. C. E. van den Bosch, A. Vazdekis, C. J. Walcher, L. Zhu, S. Zibetti, B. Ziegler, J. Bland-Hawthorn, the CALIFA collaboration

Abstract: In this letter we describe how we use stellar dynamics information to constrain the shape of the stellar IMF in a sample of 27 early-type galaxies from the CALIFA survey. We obtain dynamical and stellar mass-to-light ratios, $Υうぷしろん_\mathrm{dyn}$ and $Υうぷしろん_{\ast}$, over a homogenous aperture of 0.5~$R_{e}$. We use the constraint $Υうぷしろん_\mathrm{dyn} \ge Υうぷしろん_{\ast}$ to test two IMF shapes within the framework of… ▽ More In this letter we describe how we use stellar dynamics information to constrain the shape of the stellar IMF in a sample of 27 early-type galaxies from the CALIFA survey. We obtain dynamical and stellar mass-to-light ratios, $Υうぷしろん_\mathrm{dyn}$ and $Υうぷしろん_{\ast}$, over a homogenous aperture of 0.5~$R_{e}$. We use the constraint $Υうぷしろん_\mathrm{dyn} \ge Υうぷしろん_{\ast}$ to test two IMF shapes within the framework of the extended MILES stellar population models. We rule out a single power law IMF shape for 75% of the galaxies in our sample. Conversely, we find that a double power law IMF shape with a varying high-mass end slope is compatible (within 1$σしぐま$) with 95% of the galaxies. We also show that dynamical and stellar IMF mismatch factors give consistent results for the systematic variation of the IMF in these galaxies. △ Less

Submitted 23 June, 2016; originally announced June 2016.

Comments: 6 pages, 3 figures, accepted for publication in MNRAS Letters

Unification of the Fundamental Plane and Super-Massive Black Holes Masses

Authors: Remco van den Bosch

Abstract: According to the Virial Theorem, all gravitational systems in equilibrium sit on a plane in the 3D parameter space defined by their mass, size and second moment of the velocity tensor. While these quantities cannot be directly observed, there are suitable proxies: the luminosity Lk, half-light radius Re and dispersion sigma_e. These proxies indeed lie on a very tight Fundamental Plane (FP). How do… ▽ More According to the Virial Theorem, all gravitational systems in equilibrium sit on a plane in the 3D parameter space defined by their mass, size and second moment of the velocity tensor. While these quantities cannot be directly observed, there are suitable proxies: the luminosity Lk, half-light radius Re and dispersion sigma_e. These proxies indeed lie on a very tight Fundamental Plane (FP). How do the black holes in the centers of galaxies relate to the FP? Their masses are known to exhibit no strong correlation with total galaxy mass, but they do correlate weakly with bulge mass (when present), and extremely well with the velocity dispersion through the Mbh = sigma_e^5.4 relation. These facts together imply that a tight plane must also exist defined by black hole mass, total galaxy mass and size. Here I show that this is indeed the case using a heterogeneous set of 230 black holes. The sample includes BHs from zero to 10 billion solar masses and host galaxies ranging from low surface brightness dwarfs, through bulge-less disks, to brightest cluster galaxies. The resulting BH-size-luminosity Mbh=(Lk/Re)^3.8 has the same amount of scatter as the M-sigma relation and is aligned with the galaxy FP, such that it is just a re-projection of sigma. The inferred BH-size-mass relation is Mbh=(M_star/Re)^2.9. These relationships are universal and extend to galaxies without bulges. This implies that the black hole is primarily correlated with its global velocity dispersion and not with the properties of the bulge. I show that the classical bulge--mass relation is a projection of the M-sigma relation. When the velocity dispersion cannot be measured (at high-z or low dispersions), the BH-size-mass relation should be used as a proxy for black hole mass in favor of just galaxy or bulge mass. △ Less

Submitted 22 June, 2016; v1 submitted 3 June, 2016; originally announced June 2016.

Comments: 13 pages, 8 figures, and a large table. Accepted to ApJ. Datatable and code at https://github.com/remcovandenbosch/Black-Hole-Mass-compilation

Towards Precision Supermassive Black Hole Masses using Megamaser Disks

Authors: Remco C. E. van den Bosch, Jenny E. Greene, James A. Braatz, Anca Constantin, Cheng-Yu Kuo

Abstract: Megamaser disks provide the most precise and accurate extragalactic supermassive black hole masses. Here we describe a search for megamasers in nearby galaxies using the Green Bank Telescope (GBT). We focus on galaxies where we believe that we can resolve the gravitational sphere of influence of the black hole and derive a stellar or gas dynamical measurement with optical or NIR observations. Sinc… ▽ More Megamaser disks provide the most precise and accurate extragalactic supermassive black hole masses. Here we describe a search for megamasers in nearby galaxies using the Green Bank Telescope (GBT). We focus on galaxies where we believe that we can resolve the gravitational sphere of influence of the black hole and derive a stellar or gas dynamical measurement with optical or NIR observations. Since there are only a handful of super massive black holes (SMBH) that have direct black hole mass measurements from more than one method, even a single galaxy with a megamaser disk and a stellar dynamical black hole mass would provide necessary checks on the stellar dynamical methods. We targeted 87 objects from the Hobby-Eberly Telescope Massive Galaxy Survey, and detected no new maser disks. Most of the targeted objects are elliptical galaxies with typical stellar velocity dispersions of 250 km/s and distances within 130 Mpc. We discuss the implications of our non-detections, whether they imply a threshold X-ray luminosity required for masing, or possibly reflect the difficulty of maintaining a masing disk around much more massive (>10^8 Msun) black holes at low Eddington ratio. Given the power of maser disks at probing black hole accretion and demographics, we suggest that future maser searches should endeavour to remove remaining sample biases, in order to sort out the importance of these covariant effects. △ Less

Submitted 4 June, 2016; v1 submitted 4 January, 2016; originally announced January 2016.

Comments: 9 pages, 5 figures, Apj, updated to match the accepted version

Hunting for Supermassive Black Holes in Nearby Galaxies with the Hobby-Eberly Telescope

Authors: Remco van den Bosch, Karl Gebhardt, Kayhan Gültekin, Akin Yıldırım, Jonelle Walsh

Abstract: We have conducted an optical long-slit spectroscopic survey of 1022 galaxies using the 10m Hobby-Eberly Telescope (HET) at McDonald Observatory. The main goal of the HET Massive Galaxy Survey (HETMGS) is to find nearby galaxies that are suitable for black hole mass measurements. In order to measure accurately the black hole mass, one should kinematically resolve the region where the black hole dom… ▽ More We have conducted an optical long-slit spectroscopic survey of 1022 galaxies using the 10m Hobby-Eberly Telescope (HET) at McDonald Observatory. The main goal of the HET Massive Galaxy Survey (HETMGS) is to find nearby galaxies that are suitable for black hole mass measurements. In order to measure accurately the black hole mass, one should kinematically resolve the region where the black hole dominates the gravitational potential. For most galaxies, this region is much less than an arcsecond. Thus, black hole masses are best measured in nearby galaxies with telescopes that obtain high-spatial resolution. The HETMGS focuses on those galaxies predicted to have the largest sphere-of-influence, based on published stellar velocity dispersions or the galaxy fundamental plane. To ensure coverage over galaxy types, the survey targets those galaxies across a face-on projection of the fundamental plane. We present the sample selection and resulting data products from the long-slit observations, including central stellar kinematics and emission line ratios. The full dataset, including spectra and resolved kinematics, is available online. Additionally, we show that the current crop of black hole masses are highly biased towards dense galaxies and that especially large disks and low dispersion galaxies are under-represented. This survey provides the necessary groundwork for future systematic black hole mass measurement campaigns. △ Less

Submitted 2 February, 2015; originally announced February 2015.

Comments: 12 pages, 10 figures and a 17 page data table, ApJs accepted. Survey data files at http://mpia.de/~bosch/hetmgs

Discrete dynamical modelling of omega Centauri

Authors: Laura L. Watkins, Glenn van de Ven, Mark den Brok, Remco C. E. van den Bosch

Abstract: We present a new framework for modelling discrete kinematic data. Current techniques typically involve binning. Our approach works directly with the discrete data and uses maximum-likelihood methods to assess the probability of the dataset given model predictions. We avoid making hard cuts on the datasets by allowing for a contaminating population in our models. We apply our models to discrete pro… ▽ More We present a new framework for modelling discrete kinematic data. Current techniques typically involve binning. Our approach works directly with the discrete data and uses maximum-likelihood methods to assess the probability of the dataset given model predictions. We avoid making hard cuts on the datasets by allowing for a contaminating population in our models. We apply our models to discrete proper-motion and line-of-sight-velocity data of Galactic globular cluster omega Centauri and find a mildly radial velocity anisotropy beta = 0.10 +/- 0.02, an inclination angle i = 50 +/- 1 deg, a V-band mass-to-light ratio Upsilon = 2.71 +/- 0.05 Msun/Lsun and a distance d = 4.59 +/- 0.08 kpc. All parameters are in agreement with previous studies, demonstrating the feasibility of our methods. We find that the models return lower distances and higher mass-to-light ratios than expected when we include proper motion stars with high errors or for which there is some blending. We believe this not a fault of our models but is instead due to underestimates or missing systematic uncertainties in the provided errors. △ Less

Submitted 22 August, 2013; originally announced August 2013.

Comments: 14 pages + 4 page appendix, 7 figures, 3 tables; accepted by MNRAS

An Over-Massive Black Hole in the Compact Lenticular Galaxy NGC1277

Authors: Remco C. E. van den Bosch, Karl Gebhardt, Kayhan Gültekin, Glenn van de Ven, Arjen van der Wel, Jonelle L. Walsh

Abstract: All massive galaxies likely have supermassive black holes at their centers, and the masses of the black holes are known to correlate with properties of the host galaxy bulge component. Several explanations have been proposed for the existence of these locally-established empirical relationships; they include the non-causal, statistical process of galaxy-galaxy merging, direct feedback between the… ▽ More All massive galaxies likely have supermassive black holes at their centers, and the masses of the black holes are known to correlate with properties of the host galaxy bulge component. Several explanations have been proposed for the existence of these locally-established empirical relationships; they include the non-causal, statistical process of galaxy-galaxy merging, direct feedback between the black hole and its host galaxy, or galaxy-galaxy merging and the subsequent violent relaxation and dissipation. The empirical scaling relations are thus important for distinguishing between various theoretical models of galaxy evolution, and they further form the basis for all black hole mass measurements at large distances. In particular, observations have shown that the mass of the black hole is typically 0.1% of the stellar bulge mass of the galaxy. The small galaxy NGC4486B currently has the largest published fraction of its mass in a black hole at 11%. Here we report observations of the stellar kinematics of NGC 1277, which is a compact, disky galaxy with a mass of 1.2 x 10^11 Msun. From the data, we determine that the mass of the central black hole is 1.7 x 10^10 Msun, or 59% its bulge mass. Five other compact galaxies have properties similar to NGC 1277 and therefore may also contain over-sized black holes. It is not yet known if these galaxies represent a tail of a distribution, or if disk-dominated galaxies fail to follow the normal black hole mass scaling relations. △ Less

Submitted 27 November, 2012; originally announced November 2012.

Comments: 7 pages. 6 figures. Nature. Animation at http://www.mpia.de/~bosch/blackholes.html

Journal ref: Nature, 2012, vol 491, issue 7426, pp 729-731

Estimating Black Hole Masses in Triaxial Galaxies

Authors: Remco C. E. van den Bosch, P. Tim de Zeeuw

Abstract: Most of the super massive black hole mass estimates based on stellar kinematics use the assumption that galaxies are axisymmetric oblate spheroids or spherical. Here we use fully general triaxial orbit-based models to explore the effect of relaxing the axisymmetric assumption on the previously studied galaxies M32 and NGC 3379. We find that M32 can only be modeled accurately using an axisymmetri… ▽ More Most of the super massive black hole mass estimates based on stellar kinematics use the assumption that galaxies are axisymmetric oblate spheroids or spherical. Here we use fully general triaxial orbit-based models to explore the effect of relaxing the axisymmetric assumption on the previously studied galaxies M32 and NGC 3379. We find that M32 can only be modeled accurately using an axisymmetric shape viewed nearly edge-on and our black hole mass estimate is identical to previous studies. When the observed 5 degrees kinematical twist is included in our model of NGC 3379, the best shape is mildly triaxial and we find that our best-fitting black hole mass estimate doubles with respect to the axisymmetric model. This particular black hole mass estimate is still within the errors of that of the axisymmetric model and consistent with the M-sigma relationship. However, this effect may have a pronounced impact on black hole demography, since roughly a third of the most massive galaxies are strongly triaxial. △ Less

Submitted 5 October, 2009; originally announced October 2009.

Comments: Accepted for publication in MNRAS. 11 pages, 9 figures. PDFlatex

Recovering the intrinsic shape of early-type galaxies

Authors: Remco C. E. van den Bosch, Glenn van de Ven

Abstract: We investigate how well the intrinsic shape of early-type galaxies can be recovered when both photometric and two-dimensional stellar kinematic observations are available. We simulate these observations with galaxy models that are representative of observed oblate fast-rotator to triaxial slow-rotator early-type galaxies. By fitting realistic triaxial dynamical models to these simulated observat… ▽ More We investigate how well the intrinsic shape of early-type galaxies can be recovered when both photometric and two-dimensional stellar kinematic observations are available. We simulate these observations with galaxy models that are representative of observed oblate fast-rotator to triaxial slow-rotator early-type galaxies. By fitting realistic triaxial dynamical models to these simulated observations, we recover the intrinsic shape (and mass-to-light ratio), without making additional (ad-hoc) assumptions on the orientation. For (near) axisymmetric galaxies the dynamical modelling can strongly exclude triaxiality, but the regular kinematics do not further tighten the constraint on the intrinsic flattening significantly, so that the inclination is nearly unconstrained above the photometric lower limit even with two-dimensional stellar kinematics. Triaxial galaxies can have additional complexity in both the observed photometry and kinematics, such as twists and (central) kinematically decoupled components, which allows the intrinsic shape to be accurately recovered. For galaxies that are very round or show no significant rotation, recovery of the shape is degenerate, unless additional constraints such as from a thin disk are available. △ Less

Submitted 9 July, 2009; v1 submitted 21 November, 2008; originally announced November 2008.

Comments: 12 pages, 7 figures, PDFLaTeX, accepted to MNRAS, minor revisions

Triaxial orbit based galaxy models with an application to the (apparent) decoupled core galaxy NGC 4365

Authors: R. C. E. van den Bosch, G. van de Ven, E. K. Verolme, M. Cappellari, P. T. de Zeeuw

Abstract: We present a flexible and efficient method to construct triaxial dynamical models of galaxies with a central black hole, using Schwarzschild's orbital superposition approach. Our method is general and can deal with realistic luminosity distributions, which project to surface brightness distributions that may show position angle twists and ellipticity variations. The models are fit to measurement… ▽ More We present a flexible and efficient method to construct triaxial dynamical models of galaxies with a central black hole, using Schwarzschild's orbital superposition approach. Our method is general and can deal with realistic luminosity distributions, which project to surface brightness distributions that may show position angle twists and ellipticity variations. The models are fit to measurements of the full line-of-sight velocity distribution (wherever available). We verify that our method is able to reproduce theoretical predictions of a three-integral triaxial Abel model. In a companion paper (van de Ven, de Zeeuw & van den Bosch), we demonstrate that the method recovers the phase-space distribution function. We apply our method to two-dimensional observations of the E3 galaxy NGC 4365, obtained with the integral-field spectrograph SAURON, and study its internal structure, showing that the observed kinematically decoupled core is not physically distinct from the main body and the inner region is close to oblate axisymmetric. △ Less

Submitted 3 December, 2007; originally announced December 2007.

Comments: 21 Pages, 14 (Colour) Figures, Companion paper is arXiv:0712.0309 Accepted to MNRAS. Full resolution version at http://www.strw.leidenuniv.nl/~bosch/papers/RvdBosch_triaxmethod.pdf

Journal ref: 2008, MNRAS, 385..647

The dynamical M/L-profile and distance of the globular cluster M15

Authors: Remco van den Bosch, Tim de Zeeuw, Karl Gebhardt, Eva Noyola, Glenn van de Ven

Abstract: We construct orbit-based axisymmetric dynamical models for the globular cluster M15 which fit groundbased line-of-sight velocities and Hubble Space Telescope line-of-sight velocities and proper motions. This allows us to constrain the variation of the mass-to-light ratio M/L as a function of radius in the cluster, and to measure the distance and inclination of the cluster. We obtain a best-fitti… ▽ More We construct orbit-based axisymmetric dynamical models for the globular cluster M15 which fit groundbased line-of-sight velocities and Hubble Space Telescope line-of-sight velocities and proper motions. This allows us to constrain the variation of the mass-to-light ratio M/L as a function of radius in the cluster, and to measure the distance and inclination of the cluster. We obtain a best-fitting inclination of 60+/-15 degrees, a dynamical distance of 10.3+/-0.4 kpc and an M/L profile with a central peak. The inferred mass in the central 0.05 parsec is 3400 Msun, implying a central density of at least 7.4x10^6 Msun pc^-3. We cannot distinguish the nature of the central mass concentration. It could be an IMBH or it could be large number of compact objects, or it could be a combination. The central 4 arcsec of M15 appears to contain a rapidly spinning core, and we speculate on its origin. △ Less

Submitted 21 December, 2005; v1 submitted 20 December, 2005; originally announced December 2005.

Comments: 10 pages, 10 figures, 4 tables, emulateapj, Accepted for publication in ApJ, v2: fixed layout

Journal ref: Astrophys.J.641:852-861,2006

Triaxial Orbit-based Models Of Elliptical Galaxies

Authors: Remco van den Bosch, Glenn van de Ven, Ellen Verolme, Michele Cappellari, Tim de Zeeuw

Abstract: We have developed an orbit-based method for constructing triaxial models of elliptical galaxies, which fit their observed surface brightness and kinematics. We have tested the method against analytical models with general distribution functions. Here, we present models that fit integral-field SAURON observations of NGC3379 and NGC4365. We have developed an orbit-based method for constructing triaxial models of elliptical galaxies, which fit their observed surface brightness and kinematics. We have tested the method against analytical models with general distribution functions. Here, we present models that fit integral-field SAURON observations of NGC3379 and NGC4365. △ Less

Submitted 2 December, 2005; originally announced December 2005.

Comments: 2 pages (2 figures), Proceedings for the fifth Marseille International Cosmology Conference: "The Fabulous Destiny of Galaxies: Bridging Past and Present", 2005 June 20-24, Marseille