-
Gemini High-resolution Optical SpecTrograph (GHOST) at Gemini-South: Instrument performance and integration, first science, and next steps
Authors:
V. M. Kalari,
R. J. Diaz,
G. Robertson,
A. McConnachie,
M. Ireland,
R. Salinas,
P. Young,
C. Simpson,
C. Hayes,
J. Nielsen,
G. Burley,
J. Pazder,
M. Gomez-Jimenez,
E. Martioli,
S. B. Howell,
M. Jeong,
S. Juneau,
R. Ruiz-Carmona,
S. Margheim,
A. Sheinis,
A. Anthony,
G. Baker,
T. A. M. Berg,
T. Cao,
E. Chapin
, et al. (35 additional authors not shown)
Abstract:
The Gemini South telescope is now equipped with a new high-resolution spectrograph called GHOST (the Gemini High-resolution Optical SpecTrograph). This instrument provides high-efficiency, high-resolution spectra covering 347-1060 nm in a single exposure of either one or two targets simultaneously, along with precision radial velocity spectroscopy utilizing an internal calibration source. It can o…
▽ More
The Gemini South telescope is now equipped with a new high-resolution spectrograph called GHOST (the Gemini High-resolution Optical SpecTrograph). This instrument provides high-efficiency, high-resolution spectra covering 347-1060 nm in a single exposure of either one or two targets simultaneously, along with precision radial velocity spectroscopy utilizing an internal calibration source. It can operate at a spectral element resolving power of either 76000 or 56000, and can reach a SNR$\sim$5 in a 1hr exposure on a V$\sim$20.8 mag target in median site seeing, and dark skies (per resolution element). GHOST was installed on-site in June 2022, and we report performance after full integration to queue operations in November 2023, in addition to scientific results enabled by the integration observing runs. These results demonstrate the ability to observe a wide variety of bright and faint targets with high efficiency and precision. With GHOST, new avenues to explore high-resolution spectroscopy have opened up to the astronomical community. These are described, along with the planned and potential upgrades to the instrument.
△ Less
Submitted 9 September, 2024;
originally announced September 2024.
-
GHOST Commissioning Science Results III: Characterizing an iron-poor damped Lyman $α$ system
Authors:
Trystyn A. M. Berg,
Christian R. Hayes,
Stefano Cristiani,
Alan McConnachie,
J. Gordon Robertson,
Federico Sestito,
Chris Simpson,
Fletcher Waller,
Timothy Chin,
Adam Densmore,
Ruben J. Diaz,
Michael L. Edgar,
Javier Fuentes Lettura,
Manuel Gómez-Jiménez,
Venu M. Kalari,
Jon Lawrence,
Steven Margheim,
John Pazder,
Roque Ruiz-Carmona,
Ricardo Salinas,
Karleyne M. G. Silva,
Katherine Silversides,
Kim A. Venn
Abstract:
The Gemini High-resolution Optical SpecTrograph (GHOST) is a new echelle spectrograph available on the Gemini-South telescope as of Semester 2024A. We present the first high resolution spectrum of the quasar J1449-1227 (redshift z_em=3.27) using data taken during the commissioning of GHOST. The observed quasar hosts an intervening iron-poor ([Fe/H] = -2.5) damped Lyman alpha (DLA) system at redshi…
▽ More
The Gemini High-resolution Optical SpecTrograph (GHOST) is a new echelle spectrograph available on the Gemini-South telescope as of Semester 2024A. We present the first high resolution spectrum of the quasar J1449-1227 (redshift z_em=3.27) using data taken during the commissioning of GHOST. The observed quasar hosts an intervening iron-poor ([Fe/H] = -2.5) damped Lyman alpha (DLA) system at redshift z=2.904. Taking advantage of the high spectral resolving power of GHOST (R~55000), we are able to accurately model the metal absorption lines of the metal-poor DLA and find a supersolar [Si/Fe], suggesting the DLA gas is in an early stage of chemical enrichment. Using simple ionization models, we find that the large range in the C IV/Si IV column density ratio of individual components within the DLA's high ionization absorption profile can be reproduced by several metal-poor Lyman limit systems surrounding the low-ionization gas of the DLA. It is possible that this metal-poor DLA resides within a complex system of metal-poor galaxies or filaments with inflowing gas. The high spectral resolution, wavelength coverage and sensitivity of GHOST makes it an ideal spectrograph for characterizing the chemistry and kinematics of quasar absorption lines.
△ Less
Submitted 18 April, 2024; v1 submitted 15 April, 2024;
originally announced April 2024.
-
The Science Performance of the Gemini High Resolution Optical Spectrograph
Authors:
Alan W. McConnachie,
Christian R. Hayes,
J. Gordon Robertson,
John Pazder,
Michael Ireland,
Greg Burley,
Vladimir Churilov,
Jordan Lothrop,
Ross Zhelem,
Venu Kalari,
André Anthony,
Gabriella Baker,
Trystyn Berg,
Edward L. Chapin,
Timothy Chin,
Adam Densmore,
Ruben Diaz,
Jennifer Dunn,
Michael L. Edgar,
Tony Farrell,
Veronica Firpo,
Javier Fuentes,
Manuel Gomez-Jimenez,
Tim Hardy,
David Henderson
, et al. (24 additional authors not shown)
Abstract:
The Gemini High Resolution Optical Spectrograph (GHOST) is a fiber-fed spectrograph system on the Gemini South telescope that provides simultaneous wavelength coverage from 348 - 1061nm, and designed for optimal performance between 363 - 950nm. It can observe up to two objects simultaneously in a 7.5 arcmin diameter field of regard at R = 56,000 or a single object at R = 75,000. The spectral resol…
▽ More
The Gemini High Resolution Optical Spectrograph (GHOST) is a fiber-fed spectrograph system on the Gemini South telescope that provides simultaneous wavelength coverage from 348 - 1061nm, and designed for optimal performance between 363 - 950nm. It can observe up to two objects simultaneously in a 7.5 arcmin diameter field of regard at R = 56,000 or a single object at R = 75,000. The spectral resolution modes are obtained by using integral field units to image slice a 1.2" aperture by a factor of five in width using 19 fibers in the high resolution mode and by a factor of three in width using 7 fibers in the standard resolution mode. GHOST is equipped with hardware to allow for precision radial velocity measurements, expected to approach meters per second precision. Here, we describe the basic design and operational capabilities of GHOST, and proceed to derive and quantify the key aspects of its on-sky performance that are of most relevance to its science users.
△ Less
Submitted 14 January, 2024;
originally announced January 2024.
-
GHOST Commissioning Science Results: Identifying a new chemically peculiar star in Reticulum II
Authors:
Christian R. Hayes,
Kim A. Venn,
Fletcher Waller,
Jaclyn Jensen,
Alan W. McConnachie,
John Pazder,
Federico Sestito,
Andre Anthony,
Gabriella Baker,
John Bassett,
Joao Bento,
Gregory Burley,
Jurek Brzeski,
Scott Case,
Edward Chapin,
Timothy Chin,
Eric Chisholm,
Vladimir Churilov,
Adam Densmore,
Ruben Diaz,
Jennifer Dunn,
Michael Edgar,
Tony Farrell,
Veronica Firpo,
Joeleff Fitzsimmons
, et al. (57 additional authors not shown)
Abstract:
The Gemini High-resolution Optical SpecTrograph (GHOST) is the newest high resolution spectrograph to be developed for a large aperture telescope, recently deployed and commissioned at the Gemini-South telescope. In this paper, we present the first science results from the GHOST spectrograph taking during its commissioning runs. We have observed the bright metal-poor benchmark star HD 122563, alon…
▽ More
The Gemini High-resolution Optical SpecTrograph (GHOST) is the newest high resolution spectrograph to be developed for a large aperture telescope, recently deployed and commissioned at the Gemini-South telescope. In this paper, we present the first science results from the GHOST spectrograph taking during its commissioning runs. We have observed the bright metal-poor benchmark star HD 122563, along with two stars in the ultra faint dwarf galaxy, Ret II, one of which was previously identified as a candidate member, but did not have a previous detailed chemical abundance analysis. This star (GDR3 0928) is found to be a bona fide member of Ret II, and from a spectral synthesis analysis, it is also revealed to be a CEMP-r star, with significant enhancements in the several light elements (C, N, O, Na, Mg, and Si), in addition to featuring an r-process enhancement like many other Ret II stars. The light-element enhancements in this star resemble the abundance patterns seen in the CEMP-no stars of other ultra faint dwarf galaxies, and are thought to have been produced by an independent source from the r-process. These unusual abundance patterns are thought to be produced by faint supernovae, which may be produced by some of the earliest generations of stars.
△ Less
Submitted 7 June, 2023;
originally announced June 2023.
-
Astrophotonic Solutions for Spectral Cross-Correlation Techniques
Authors:
Suresh Sivanandam,
Ross Cheriton,
Polina Zavyalova,
Peter R. Herman,
Emily Deibert,
Erin Tonita,
Volodymyr Artyshchuk,
Ernst de Mooij,
Siegfried Janz,
Adam Densmore
Abstract:
Using photonic devices, we developed a new approach to traditional spectroscopy where the spectral cross-correlation with a template spectrum can be done entirely on-device. By creating photonic devices with a carefully designed, modulated transmission spectrum, the cross-correlation can be carried out optically without requiring any dispersion, vastly simplifying the instrument and reducing its c…
▽ More
Using photonic devices, we developed a new approach to traditional spectroscopy where the spectral cross-correlation with a template spectrum can be done entirely on-device. By creating photonic devices with a carefully designed, modulated transmission spectrum, the cross-correlation can be carried out optically without requiring any dispersion, vastly simplifying the instrument and reducing its cost. The measured correlation lag can be used for detecting atomic/molecular species within and determining the radial velocity of a particular astrophysical object.
We present an overview of two design approaches that are currently being developed that use different photonic platforms: silicon and fibre-based photonics. The silicon photonic approach utilizes ring resonators that can be thermo-optically modulated to carry out the cross-correlation. The fibre approach uses customized fibre Bragg gratings (FBGs) with transmission spectra that can be strain-modulated. Both approaches have been able to detect molecular gas in a lab setting, and we are now in the process of on-sky testing.
Lastly, we discuss the future for these types of devices as their simplicity opens up the possibility of developing low-cost, purpose-built multi-object or integral field spectroscopic instruments that could make significant contributions to scientific programs requiring stellar RV measurements and exoplanet detections.
△ Less
Submitted 11 August, 2022;
originally announced August 2022.
-
Fast modulation and dithering for the NFIRAOS Pyramid Wavefront Sensor
Authors:
Edward L. Chapin,
David Andersen,
Owen Brown,
Jeffrey Crane,
Adam Densmore,
Jennifer Dunn,
Tim Hardy,
Glen Herriot,
Dan Kerley,
Olivier Lardiere,
Jean-Pierre Veran
Abstract:
The Narrow Field InfraRed Adaptive Optics System (NFIRAOS) for the Thirty Meter Telescope (TMT) will use a natural guide star (NGS) Pyramid Wavefront Sensor (PWFS). A 32-mm diameter Fast Steering Mirror (FSM) is used to modulate the position of the NGS image around the tip of the pyramid. The mirror traces out a circular tip/tilt pattern at up to 800 Hz (the maximum operating frequency of NFIRAOS)…
▽ More
The Narrow Field InfraRed Adaptive Optics System (NFIRAOS) for the Thirty Meter Telescope (TMT) will use a natural guide star (NGS) Pyramid Wavefront Sensor (PWFS). A 32-mm diameter Fast Steering Mirror (FSM) is used to modulate the position of the NGS image around the tip of the pyramid. The mirror traces out a circular tip/tilt pattern at up to 800 Hz (the maximum operating frequency of NFIRAOS), with a diameter chosen to balance sensitivity and dynamic range. A circular dither pattern at 1/4 the modulation frequency is superimposed to facilitate optical gain measurements. The timing of this motion is synchronized precisely with individual exposures on the PWFS detector, and must also be phased with other wavefront sensors, such as Laser Guide Star Wavefront Sensors (LGSWFS) and the On-Instrument Wavefront Sensors (OIWFS) of NFIRAOS client instruments (depending on the observing mode), to minimize latency. During trade studies it was decided to pursue a piezo actuator from Physik Instrumente (PI) using a monocrystalline piezo material, as more conventional polycrystalline devices would not meet the lifetime, stroke, and frequency requirements. Furthermore, PI claims excellent stability and hysteresis with similar piezo stages, rendering sensor feedback unnecessary. To characterize the performance of this mechanism, and to verify that it can function acceptably in open-loop, we have operated the stage on a test bench using a laser and high-speed position sensing devices (PSDs) both at room temperature and at the cold -30 C operating temperature of NFIRAOS. We have also prototyped the software and hardware triggering strategy that will be used to synchronize the FSM with the rest of NFIRAOS.
△ Less
Submitted 13 August, 2021;
originally announced August 2021.
-
arXiv:2107.04494
[pdf]
astro-ph.IM
physics.app-ph
physics.ins-det
physics.optics
physics.space-ph
Fibre Fabry-Pérot Astrophotonic Correlation Spectroscopy for Remote Gas Identification and Radial Velocity Measurements
Authors:
Ross Cheriton,
Adam Densmore,
Suresh Sivanandam,
Ernst De Mooij,
Pavel Cheben,
Dan-Xia Xu,
Jens H. Schmid,
Siegfried Janz
Abstract:
We present a novel remote gas detection and identification technique based on correlation spectroscopy with a piezoelectric tunable fibre-optic Fabry-Pérot filter. We show that the spectral correlation amplitude between the filter transmission window and gas absorption features is related to the gas absorption optical depth, and that different gases can be distinguished from one another using thei…
▽ More
We present a novel remote gas detection and identification technique based on correlation spectroscopy with a piezoelectric tunable fibre-optic Fabry-Pérot filter. We show that the spectral correlation amplitude between the filter transmission window and gas absorption features is related to the gas absorption optical depth, and that different gases can be distinguished from one another using their correlation signal phase. Using an observed telluric-corrected, high-resolution near-infrared spectrum of Venus, we show via simulation that the Doppler shift of gases lines can be extracted from the phase of the lock-in signal using low-cost, compact, and lightweight fibre-optic components with lock-in amplification to improve the signal-to-noise ratio. This correlation spectroscopy technique has applications in the detection and radial velocity determination of faint spectral features in astronomy and remote sensing. We experimentally demonstrate remote CO2 detection system using a lock-in amplifier, fibre-optic Fabry-Pérot filter, and single channel photodiode.
△ Less
Submitted 9 July, 2021;
originally announced July 2021.
-
Spectrum-free integrated photonic remote molecular identification and sensing
Authors:
Ross Cheriton,
Suresh Sivanandam,
Adam Densmore,
Ernst J. W. de Mooij,
Daniele Melati,
Mohsen Kamandar Dezfouli,
Pavel Cheben,
Danxia Xu,
Jens H. Schmid,
Jean Lapointe,
Rubin Ma,
Shurui Wang,
Luc Simard,
Siegfried Janz
Abstract:
Absorption spectroscopy is widely used in sensing and astronomy to understand molecular compositions on microscopic to cosmological scales. However, typical dispersive spectroscopic techniques require multichannel detection, fundamentally limiting the ability to detect extremely weak signals when compared to direct photometric methods. We report the realization of direct spectral molecular detecti…
▽ More
Absorption spectroscopy is widely used in sensing and astronomy to understand molecular compositions on microscopic to cosmological scales. However, typical dispersive spectroscopic techniques require multichannel detection, fundamentally limiting the ability to detect extremely weak signals when compared to direct photometric methods. We report the realization of direct spectral molecular detection using a silicon nanophotonic waveguide resonator, obviating dispersive spectral acquisition. We use a thermally tunable silicon ring resonator with a transmission spectrum matched and cross-correlated to the quasi-periodic vibronic absorption lines of hydrogen cyanide. We show that the correlation peak amplitude is proportional to the number of overlapping ring resonances and gas lines, and that molecular specificity is obtained from the phase of the correlation signal in a single detection channel. Our results demonstrate on-chip correlation spectroscopy that is less restricted by the signal-to-noise penalty of other spectroscopic approaches, enabling the detection of faint spectral signatures.
△ Less
Submitted 26 August, 2020; v1 submitted 18 May, 2020;
originally announced May 2020.
-
Photonic Temperature and Wavelength Metrology by Spectral Pattern Recognition
Authors:
Siegfried Janz,
Ross Cheriton,
Dan-Xia Xu,
Aadam Densmore,
Sergey Dedyulin,
Andrew Todd,
Jens Schmid,
Pavel Cheben,
Martin Vachon,
Mohsen Kamandar Dezfouli,
Daniele Melati
Abstract:
Spectral pattern recognition is used to measure temperature and generate calibrated wavelength/frequency combs using a single silicon waveguide ring resonator. The ring generates two incommensurate interleaving TE and TM spectral combs that shift independently with temperature to create a spectral pattern that is unique at every temperature. Following an initial calibration, the ring temperature c…
▽ More
Spectral pattern recognition is used to measure temperature and generate calibrated wavelength/frequency combs using a single silicon waveguide ring resonator. The ring generates two incommensurate interleaving TE and TM spectral combs that shift independently with temperature to create a spectral pattern that is unique at every temperature. Following an initial calibration, the ring temperature can be determined by recognizing the spectral resonance pattern, and as a consequence the wavelength of every resonance is also known. Two methods of pattern based temperature retrieval are presented. In the first method, the ring is locked to a previously determined temperature set-point defined by the coincidence of only two specific TE and TM cavity modes. Based on a prior calibration at the set-point, the ring temperature and hence all resonance wavelengths are then known and the resulting comb can be used as a wavelength calibration reference. In this configuration, all reference comb wavelengths have been reproduced within a 5 pm accuracy across an 80 nm range by using an on-chip micro-heater to tune the ring. For more general photonic thermometry, a spectral correlation algorithm is developed to recognize a resonance pattern across a 30 nm wide spectral window and thereby determine ring temperature continuously to 50 mK accuracy. The correlation method is extended to simultaneously determine temperature and to identify and correct for wavelength calibration errors in the interrogating light source. The temperature and comb wavelength accuracy is limited primarily by the linewidth of the ring resonances, with accuracy and resolution scaling with the ring quality factor.
△ Less
Submitted 18 April, 2020;
originally announced April 2020.
-
High speed optical processing via four-wave-mixing in a silicon waveguide
Authors:
F. Li,
M. Pelusi,
D-X. Xu,
A. Densmore,
R. Ma,
S. Janz,
D. J. Moss
Abstract:
We demonstrate all-optical demultiplexing at 160 Gigabits per second in the C-band, based on nonlinear optics using four-wave mixing (FWM) in a silicon nanowire. We achieve error-free operation with a penalty of ~ 3.9dB.
We demonstrate all-optical demultiplexing at 160 Gigabits per second in the C-band, based on nonlinear optics using four-wave mixing (FWM) in a silicon nanowire. We achieve error-free operation with a penalty of ~ 3.9dB.
△ Less
Submitted 1 May, 2017;
originally announced May 2017.
-
Silicon nanowire based exclusive-OR gate using nonlinear optics for 40Gb/s DPSK signals
Authors:
F. Li,
T. D. Vo,
C. Husko,
M. Pelusi,
D-X. Xu,
A. Densmore,
R. Ma,
S. Janz,
B. J. Eggleton,
David J. Moss
Abstract:
We demonstrate an all-optical XOR logic function for 40Gb/s differential phase-shift keyed (DPSK) data signals in the C-band, based on four-wave mixing (FWM) in a silicon nanowire. Error-free operation with a system penalty of ~ 3.0dB and ~ 4.3dB at 10-9 BER is achieved.
We demonstrate an all-optical XOR logic function for 40Gb/s differential phase-shift keyed (DPSK) data signals in the C-band, based on four-wave mixing (FWM) in a silicon nanowire. Error-free operation with a system penalty of ~ 3.0dB and ~ 4.3dB at 10-9 BER is achieved.
△ Less
Submitted 12 May, 2015;
originally announced May 2015.