-
High-speed data processing onboard sunrise chromospheric infrared spectropolarimeter for the SUNRISE III balloon telescope
Authors:
Masahito Kubo,
Yukio Katsukawa,
David Hernández Expósito,
Antonio Sánchez Gómez,
María Balaguer Jimenéz,
David Orozco Suárez,
José M. Morales Fernández,
Beatriz Aparicio del Moral,
Antonio J. Moreno Mantas,
Eduardo Bailón Martínez,
Jose Carlos del Toro Iniesta,
Yusuke Kawabata,
Carlos Quintero Noda,
Takayoshi Oba,
Ryohtaroh T. Ishikawa,
Toshifumi Shimizu
Abstract:
The Sunrise Chromospheric Infrared spectroPolarimeter (SCIP) has been developed for the third flight of the SUNRISE balloon-borne stratospheric solar observatory. The aim of SCIP is to reveal the evolution of three-dimensional magnetic fields in the solar photosphere and chromosphere using spectropolarimetric measurements with a polarimetric precision of 0.03\% (1$σ$). Multiple lines in the 770 an…
▽ More
The Sunrise Chromospheric Infrared spectroPolarimeter (SCIP) has been developed for the third flight of the SUNRISE balloon-borne stratospheric solar observatory. The aim of SCIP is to reveal the evolution of three-dimensional magnetic fields in the solar photosphere and chromosphere using spectropolarimetric measurements with a polarimetric precision of 0.03\% (1$σ$). Multiple lines in the 770 and 850 nm wavelength bands are simultaneously observed with two 2k$\times$2k CMOS cameras at a frame rate of 31.25 Hz. Stokes profiles are calculated onboard by accumulating the images modulated by a polarization modulation unit, and then compression processes are applied to the two-dimensional maps of the Stokes profiles. This onboard data processing effectively reduces the data rate. SCIP electronics can handle large data formats at high speed. Before the implementation into the flight SCIP electronics, a performance verification of the onboard data processing was performed with synthetic SCIP data that were produced with a numerical simulation modeling the solar atmospheres. Finally, we verified that the high-speed onboard data processing was realized on ground with the flight hardware by using images illuminated by natural sunlight or an LED.
△ Less
Submitted 31 July, 2023;
originally announced July 2023.
-
Development of Fast and Precise Scan Mirror Mechanism for an Airborne Solar Telescope
Authors:
Takayoshi Oba,
Toshifumi Shimizu,
Yukio Katsukawa,
Masahito Kubo,
Yusuke Kawabata,
Hirohisa Hara,
Fumihiro Uraguchi,
Toshihiro Tsuzuki,
Tomonori Tamura,
Kazuya Shinoda,
Kazuhide Kodeki,
Kazuhiko Fukushima,
José Miguel Morales Fernández,
Antonio Sánchez Gómez,
María Balaguer Jimenéz,
David Hernández Expósito,
Achim Gandorfer
Abstract:
We developed a scan mirror mechanism (SMM) that enable a slit-based spectrometer or spectropolarimeter to precisely and quickly map an astronomical object. The SMM, designed to be installed in the optical path preceding the entrance slit, tilts a folding mirror and then moves the reflected image laterally on the slit plane, thereby feeding a different one-dimensional image to be dispersed by the s…
▽ More
We developed a scan mirror mechanism (SMM) that enable a slit-based spectrometer or spectropolarimeter to precisely and quickly map an astronomical object. The SMM, designed to be installed in the optical path preceding the entrance slit, tilts a folding mirror and then moves the reflected image laterally on the slit plane, thereby feeding a different one-dimensional image to be dispersed by the spectroscopic equipment. In general, the SMM is required to scan quickly and broadly while precisely placing the slit position across the field-of-view (FOV). These performances are highly in demand for near-future observations, such as studies on the magnetohydrodynamics of the photosphere and the chromosphere. Our SMM implements a closed-loop control system by installing electromagnetic actuators and gap-based capacitance sensors. Our optical test measurements confirmed that the SMM fulfils the following performance criteria: i) supreme scan-step uniformity (linearity of 0.08%) across the wide scan range (${\pm}$1005 arcsec), ii) high stability (3$σ$ = 0.1 arcsec), where the angles are expressed in mechanical angle, and iii) fast stepping speed (26 ms). The excellent capability of the SMM will be demonstrated soon in actual use by installing the mechanism for a near-infrared spectropolarimeter onboard the balloon-borne solar observatory for the third launch, Sunrise III.
△ Less
Submitted 27 July, 2022;
originally announced July 2022.
-
The Polarimetric and Helioseismic Imager on Solar Orbiter
Authors:
S. K. Solanki,
J. C. del Toro Iniesta,
J. Woch,
A. Gandorfer,
J. Hirzberger,
A. Alvarez-Herrero,
T. Appourchaux,
V. Martínez Pillet,
I. Pérez-Grande,
E. Sanchis Kilders,
W. Schmidt,
J. M. Gómez Cama,
H. Michalik,
W. Deutsch,
G. Fernandez-Rico,
B. Grauf,
L. Gizon,
K. Heerlein,
M. Kolleck,
A. Lagg,
R. Meller,
R. Müller,
U. Schühle,
J. Staub,
K. Albert
, et al. (99 additional authors not shown)
Abstract:
This paper describes the Polarimetric and Helioseismic Imager on the Solar Orbiter mission (SO/PHI), the first magnetograph and helioseismology instrument to observe the Sun from outside the Sun-Earth line. It is the key instrument meant to address the top-level science question: How does the solar dynamo work and drive connections between the Sun and the heliosphere? SO/PHI will also play an impo…
▽ More
This paper describes the Polarimetric and Helioseismic Imager on the Solar Orbiter mission (SO/PHI), the first magnetograph and helioseismology instrument to observe the Sun from outside the Sun-Earth line. It is the key instrument meant to address the top-level science question: How does the solar dynamo work and drive connections between the Sun and the heliosphere? SO/PHI will also play an important role in answering the other top-level science questions of Solar Orbiter, as well as hosting the potential of a rich return in further science.
SO/PHI measures the Zeeman effect and the Doppler shift in the FeI 617.3nm spectral line. To this end, the instrument carries out narrow-band imaging spectro-polarimetry using a tunable LiNbO_3 Fabry-Perot etalon, while the polarisation modulation is done with liquid crystal variable retarders (LCVRs). The line and the nearby continuum are sampled at six wavelength points and the data are recorded by a 2kx2k CMOS detector. To save valuable telemetry, the raw data are reduced on board, including being inverted under the assumption of a Milne-Eddington atmosphere, although simpler reduction methods are also available on board. SO/PHI is composed of two telescopes; one, the Full Disc Telescope (FDT), covers the full solar disc at all phases of the orbit, while the other, the High Resolution Telescope (HRT), can resolve structures as small as 200km on the Sun at closest perihelion. The high heat load generated through proximity to the Sun is greatly reduced by the multilayer-coated entrance windows to the two telescopes that allow less than 4% of the total sunlight to enter the instrument, most of it in a narrow wavelength band around the chosen spectral line.
△ Less
Submitted 26 March, 2019;
originally announced March 2019.
-
Autonomous on-board data processing and instrument calibration software for the SO/PHI
Authors:
K. Albert,
J. Hirzberger,
D. Busse,
T. Lange,
M. Kolleck,
B. Fiethe,
D. Orozco Suárez,
J. Woch,
J. Schou,
J. Blanco Rodríguez,
A. Gandorfer,
Y. Guan,
J. P. Cobos Carrascosa,
D. Hernández Expósito,
J. C. del Toro Iniesta,
S. K. Solanki,
H. Michalik
Abstract:
The extension of on-board data processing capabilities is an attractive option to reduce telemetry for scientific instruments on deep space missions. The challenges that this presents, however, require a comprehensive software system, which operates on the limited resources a data processing unit in space allows.
We implemented such a system for the Polarimetric and Helioseismic Imager (PHI) on-bo…
▽ More
The extension of on-board data processing capabilities is an attractive option to reduce telemetry for scientific instruments on deep space missions. The challenges that this presents, however, require a comprehensive software system, which operates on the limited resources a data processing unit in space allows.
We implemented such a system for the Polarimetric and Helioseismic Imager (PHI) on-board the Solar Orbiter (SO) spacecraft. It ensures autonomous operation to handle long command-response times, easy changing of the processes after new lessons have been learned and meticulous book-keeping of all operations to ensure scientific accuracy. This contribution presents the requirements and main aspects of the software implementation, followed by an example of a task implemented in the software frame, and results from running it on SO/PHI.
The presented example shows that the different parts of the software framework work well together, and that the system processes data as we expect. The flexibility of the framework makes it possible to use it as a baseline for future applications with similar needs and limitations as SO/PHI.
△ Less
Submitted 8 October, 2018;
originally announced October 2018.
