-
O -Acetylated sugars in the gas phase: stability, migration, positional isomers and conformation
Authors:
Oznur Yeni,
Amira Gharbi,
Stéphane Chambert,
Jean Rouillon,
Abdul-Rahman Allouche,
Baptiste Schindler,
Isabelle Compagnon
Abstract:
O-acetylations are functional modifications which can be found on different hydroxyl groups of glycans and which contribute to the fine tuning of their biological activity. Localizing the acetyl modifications is notoriously challenging in glycoanalysis, in particular because of their mobility: loss or migration of the acetyl group may occur through the analytical workflow. Whereas migration condit…
▽ More
O-acetylations are functional modifications which can be found on different hydroxyl groups of glycans and which contribute to the fine tuning of their biological activity. Localizing the acetyl modifications is notoriously challenging in glycoanalysis, in particular because of their mobility: loss or migration of the acetyl group may occur through the analytical workflow. Whereas migration conditions in the condensed phase have been rationalized, little is known about the suitability of Mass Spectrometry to retain and resolve the structure of O-acetylated glycan isomers. Here we use the resolving power of infrared ion spectroscopy in combination with ab initio calculation to assess the structure of O-acetylated monosaccharide ions in the gaseous environment of a mass analyzer. N-acetyl glucosamines were synthetized with an O-acetyl group in positions 3 or 6, respectively. The protonated ions produced by electrospray ionization were observed by mass spectrometry and their vibrational fingerprints were recorded in the 3 $μ$m range by IRMPD spectroscopy (InfraRed Multiple Photon Dissociation). Experimentally, the isomers show distinctive IR fingerprints. Additionally, ab initio calculations confirm the position of the O-acetylation and resolve their gas phase conformation. These findings demonstrate that the position of O-acetyl groups is retained through the transfer from solution to the gas phase, and can be identified by IRMPD spectroscopy.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Efficient Mediated Semi-Quantum Key Distribution Protocol Using Single Qubits
Authors:
Mustapha Anis Younes,
Sofia Zebboudj,
Abdelhakim Gharbi
Abstract:
In this paper, we propose a new efficient mediated semi-quantum key distribution (MSQKD) protocol, facilitating the establishment of a shared secret key between two classical participants with the assistance of an untrusted third party (TP). Unlike existing MSQKD protocols, our approach significantly reduces the quantum requirements for TP, who only needs to prepare and measure qubits in the $X$ b…
▽ More
In this paper, we propose a new efficient mediated semi-quantum key distribution (MSQKD) protocol, facilitating the establishment of a shared secret key between two classical participants with the assistance of an untrusted third party (TP). Unlike existing MSQKD protocols, our approach significantly reduces the quantum requirements for TP, who only needs to prepare and measure qubits in the $X$ basis. Meanwhile, the classical participants are limited to preparing and measuring qubits in the $Z$ basis, along with performing Hadamard operations. This reduction in quantum overhead enhances the practicality of our MSQKD protocol without compromising qubit efficiency. Additionally, we demonstrate the security of our protocol against various well-known attacks.
△ Less
Submitted 6 May, 2024; v1 submitted 26 April, 2024;
originally announced April 2024.
-
Advancing Person Re-Identification: Tensor-based Feature Fusion and Multilinear Subspace Learning
Authors:
Akram Abderraouf Gharbi,
Ammar Chouchane,
Abdelmalik Ouamane
Abstract:
Person re-identification (PRe-ID) is a computer vision issue, that has been a fertile research area in the last few years. It aims to identify persons across different non-overlapping camera views. In this paper, We propose a novel PRe-ID system that combines tensor feature representation and multilinear subspace learning. Our method exploits the power of pre-trained Convolutional Neural Networks…
▽ More
Person re-identification (PRe-ID) is a computer vision issue, that has been a fertile research area in the last few years. It aims to identify persons across different non-overlapping camera views. In this paper, We propose a novel PRe-ID system that combines tensor feature representation and multilinear subspace learning. Our method exploits the power of pre-trained Convolutional Neural Networks (CNNs) as a strong deep feature extractor, along with two complementary descriptors, Local Maximal Occurrence (LOMO) and Gaussian Of Gaussian (GOG). Then, Tensor-based Cross-View Quadratic Discriminant Analysis (TXQDA) is used to learn a discriminative subspace that enhances the separability between different individuals. Mahalanobis distance is used to match and similarity computation between query and gallery samples. Finally, we evaluate our approach by conducting experiments on three datasets VIPeR, GRID, and PRID450s.
△ Less
Submitted 24 December, 2023;
originally announced December 2023.
-
Enhancing Person Re-Identification through Tensor Feature Fusion
Authors:
Akram Abderraouf Gharbi,
Ammar Chouchane,
Mohcene Bessaoudi,
Abdelmalik Ouamane,
El ouanas Belabbaci
Abstract:
In this paper, we present a novel person reidentification (PRe-ID) system that based on tensor feature representation and multilinear subspace learning. Our approach utilizes pretrained CNNs for high-level feature extraction, along with Local Maximal Occurrence (LOMO) and Gaussian Of Gaussian (GOG ) descriptors. Additionally, Cross-View Quadratic Discriminant Analysis (TXQDA) algorithm is used for…
▽ More
In this paper, we present a novel person reidentification (PRe-ID) system that based on tensor feature representation and multilinear subspace learning. Our approach utilizes pretrained CNNs for high-level feature extraction, along with Local Maximal Occurrence (LOMO) and Gaussian Of Gaussian (GOG ) descriptors. Additionally, Cross-View Quadratic Discriminant Analysis (TXQDA) algorithm is used for multilinear subspace learning, which models the data in a tensor framework to enhance discriminative capabilities. Similarity measure based on Mahalanobis distance is used for matching between training and test pedestrian images. Experimental evaluations on VIPeR and PRID450s datasets demonstrate the effectiveness of our method.
△ Less
Submitted 16 December, 2023;
originally announced December 2023.
-
Fusion of Deep and Shallow Features for Face Kinship Verification
Authors:
Belabbaci El Ouanas,
Khammari Mohammed,
Chouchane Ammar,
Mohcene Bessaoudi,
Abdelmalik Ouamane,
Akram Abderraouf Gharbi
Abstract:
Kinship verification from face images is a novel and formidable challenge in the realms of pattern recognition and computer vision. This work makes notable contributions by incorporating a preprocessing technique known as Multiscale Retinex (MSR), which enhances image quality. Our approach harnesses the strength of complementary deep (VGG16) and shallow texture descriptors (BSIF) by combining them…
▽ More
Kinship verification from face images is a novel and formidable challenge in the realms of pattern recognition and computer vision. This work makes notable contributions by incorporating a preprocessing technique known as Multiscale Retinex (MSR), which enhances image quality. Our approach harnesses the strength of complementary deep (VGG16) and shallow texture descriptors (BSIF) by combining them at the score level using Logistic Regression (LR) technique. We assess the effectiveness of our approach by conducting comprehensive experiments on three challenging kinship datasets: Cornell Kin Face, UB Kin Face and TS Kin Face
△ Less
Submitted 16 December, 2023;
originally announced December 2023.
-
Metrology of weak quantum perturbations
Authors:
Sidali Mohammdi,
Matteo Bina,
Abdelhakim Gharbi,
Matteo G. A. Paris
Abstract:
We consider quantum systems with a Hamiltonian containing a weak perturbation i.e. $\boldsymbol{H=H_0} + \boldsymbolλ \cdot \boldsymbol{\tilde{H}}$, $\boldsymbolλ= \{λ_1, λ_2,...\}$, $\boldsymbol{\tilde{H}}$ $= \{H_1, H_2,...\}$, $\left|\boldsymbolλ\right| \ll 1$, and address situations where $\boldsymbol{\tilde{H}}$ is known but the values of the couplings $\boldsymbolλ$ are unknown, and should b…
▽ More
We consider quantum systems with a Hamiltonian containing a weak perturbation i.e. $\boldsymbol{H=H_0} + \boldsymbolλ \cdot \boldsymbol{\tilde{H}}$, $\boldsymbolλ= \{λ_1, λ_2,...\}$, $\boldsymbol{\tilde{H}}$ $= \{H_1, H_2,...\}$, $\left|\boldsymbolλ\right| \ll 1$, and address situations where $\boldsymbol{\tilde{H}}$ is known but the values of the couplings $\boldsymbolλ$ are unknown, and should be determined by performing measurements on the system. We consider two scenarios: in the first one we assume that measurements are performed on a given stationary state of the system, e.g., the ground state, whereas in the second one an initial state is prepared and then measured after evolution. In both cases, we look for the optimal measurements to estimate the couplings and evaluate the ultimate limits to precision. In particular, we derive general results for one and two couplings, and analyze in details some specific qubit models. Our results indicates that dynamical estimation schemes may provide enhanced precision upon a suitable choice of the initial preparation and the interaction time.
△ Less
Submitted 5 October, 2023;
originally announced October 2023.
-
Topological defects at smectic interfaces as a potential tool for the biosensing of living microorganisms
Authors:
Vajra S. Badha,
Tagbo H. R. Niepa,
Mohamed Amine Gharbi
Abstract:
Characterizing the anchoring properties of smectic liquid crystals (LCs) in contact with bacterial solutions is crucial for developing biosensing platforms. In this study, we investigate the anchoring properties of a smectic LC when exposed to Bacillus Subtilis and Escherichia coli bacterial solutions using interfaces with known anchoring properties. By monitoring the optical response of the smect…
▽ More
Characterizing the anchoring properties of smectic liquid crystals (LCs) in contact with bacterial solutions is crucial for developing biosensing platforms. In this study, we investigate the anchoring properties of a smectic LC when exposed to Bacillus Subtilis and Escherichia coli bacterial solutions using interfaces with known anchoring properties. By monitoring the optical response of the smectic film, we successfully distinguish different types of bacteria, leveraging the distinct changes in the LC's response. Through a comprehensive analysis of the interactions between bacterial proteins and the smectic interface, we elucidate the potential underlying mechanisms responsible for these optical changes. Additionally, we introduce the utilization of topological defects; the focal conic domains (FCDs), at the smectic interface as an indicative measure of the bacterial concentration. Our findings demonstrate the significant potential of smectic LCs and their defects for biosensing applications and contribute to our understanding of bacteria- LC interactions, paving the way for advancements in pathogen detection and protein-based sensing.
△ Less
Submitted 22 June, 2023;
originally announced June 2023.
-
Templated self-assembly of gold nanoparticles in smectic liquid crystals confined at 3D printed curved surfaces
Authors:
Mackenzie O'Keefe,
Jane Bernadette Denise M. Garcia,
Abeco J. Rwakabuba,
Timothy M. Otchy,
Daniel A. Beller,
Mohamed Amine Gharbi
Abstract:
The fabrication of assembled structures of topological defects in liquid crystals (LCs) has attracted much attention during the last decade, stemming from the potential application of these defects in modern technologies. A range of techniques can be employed to create large areas of engineered defects in LCs, including mechanical shearing, chemical surface treatment, external fields, or geometric…
▽ More
The fabrication of assembled structures of topological defects in liquid crystals (LCs) has attracted much attention during the last decade, stemming from the potential application of these defects in modern technologies. A range of techniques can be employed to create large areas of engineered defects in LCs, including mechanical shearing, chemical surface treatment, external fields, or geometric confinement. The technology of 3D printing has recently emerged as a powerful method to fabricate novel patterning topographies inaccessible by other microfabrication techniques, especially confining geometries with curved topographies. In this work, we show the advantages of using 3D-printed curved surfaces and controlled anchoring properties to confine LCs and engineer new structures of topological defects, whose structure we elucidate by comparison with a novel application of Landau-de Gennes free energy minimization to the smectic A-nematic phase transition. We also demonstrate the ability of these defects to act as a scaffold for assembling gold (Au) nanoparticles (NPs) into reconfigurable 3D structures. We discuss the characteristics of this templated self-assembly (TSA) approach and explain the relationship between NP concentrations and defect structures with insights gained from numerical modeling. This work paves the way for a versatile platform of LC defect-templated assembly of a range of functional nanomaterials useful in the field of energy technology.
△ Less
Submitted 1 June, 2023;
originally announced June 2023.
-
A new node-shift encoding representation for the travelling salesman problem
Authors:
Menouar Boulif,
Aghiles Gharbi
Abstract:
This paper presents a new genetic algorithm encoding representation to solve the travelling salesman problem. To assess the performance of the proposed chromosome structure, we compare it with state-of-the-art encoding representations. For that purpose, we use 14 benchmarks of different sizes taken from TSPLIB. Finally, after conducting the experimental study, we report the obtained results and dr…
▽ More
This paper presents a new genetic algorithm encoding representation to solve the travelling salesman problem. To assess the performance of the proposed chromosome structure, we compare it with state-of-the-art encoding representations. For that purpose, we use 14 benchmarks of different sizes taken from TSPLIB. Finally, after conducting the experimental study, we report the obtained results and draw our conclusion.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
-
Quantum Non-Gaussianity From An Indefinite Causal Order of Gaussian Operations
Authors:
Seid Koudia,
Abdelhakim Gharbi
Abstract:
Quantum Non-Gaussian states are considered as a useful resource for many tasks in quantum information processing, from quantum metrology and quantum sensing to quantum communication and quantum key distribution. Another useful tool that is growing attention is the newly constructed quantum switch. Its applications in many tasks in quantum information have been proved to be outperforming many exist…
▽ More
Quantum Non-Gaussian states are considered as a useful resource for many tasks in quantum information processing, from quantum metrology and quantum sensing to quantum communication and quantum key distribution. Another useful tool that is growing attention is the newly constructed quantum switch. Its applications in many tasks in quantum information have been proved to be outperforming many existing schemes in quantum communication and quantum thermometry. In this contribution, we are addressing this later to be very useful to engineer highly non-Gaussian states from Gaussian operations whose order is controlled by degrees of freedom of a control qubit. The non-convexity of the set of Gaussian states and the set of Gaussian operations guarantees the emergence of non-Gaussianity after postselection on the control qubit deterministically, in contrast to existing protocols in the literature. The non-classicality of the resulting states is discussed accordingly.
△ Less
Submitted 30 August, 2021;
originally announced August 2021.
-
Submersed Micropatterned Structures Control Active Nematic Flow, Topology and Concentration
Authors:
Kristian Thijssen,
Dimitrius Khaladj,
S. Ali Aghvami,
Mohamed Amine Gharbi,
Seth Fraden,
Julia M. Yeomans,
Linda S. Hirst,
Tyler N. Shendruk
Abstract:
Coupling between flows and material properties imbues rheological matter with its wide-ranging applicability, hence the excitement for harnessing the rheology of active fluids for which internal structure and continuous energy injection lead to spontaneous flows and complex, out-of-equilibrium dynamics. We propose and demonstrate a convenient, highly tuneable method for controlling flow, topology…
▽ More
Coupling between flows and material properties imbues rheological matter with its wide-ranging applicability, hence the excitement for harnessing the rheology of active fluids for which internal structure and continuous energy injection lead to spontaneous flows and complex, out-of-equilibrium dynamics. We propose and demonstrate a convenient, highly tuneable method for controlling flow, topology and composition within active films. Our approach establishes rheological coupling via the indirect presence of fully submersed micropatterned structures within a thin, underlying oil layer. Simulations reveal that micropatterned structures produce effective virtual boundaries within the superjacent active nematic film due to differences in viscous dissipation as a function of depth. This accessible method of applying position-dependent, effective dissipation to the active films presents a non-intrusive pathway for engineering active microfluidic systems.
△ Less
Submitted 8 September, 2021; v1 submitted 19 February, 2021;
originally announced February 2021.
-
Morphology modifcation of Si nanopillars under ion irradiation at elevated temperatures: plastic deformation and controlled thinning to 10 nm
Authors:
Xiaomo Xu,
Karl-Heinz Heinig,
Wolfhard Möller,
Hans-Jürgen Engelmann,
Nico Klingner,
Ahmed Gharbi,
Raluca Tiron,
Johannes von Borany,
Gregor Hlawacek
Abstract:
Si nanopillars of less than 50 nm diameter have been irradiated in a helium ion microscope with a focused Ne$^+$ beam. The morphological changes due to ion beam irradiation at room temperature and elevated temperatures have been studied with the transmission electron microscope. We found that the shape changes of the nanopillars depend on irradiation-induced amorphization and thermally driven dyna…
▽ More
Si nanopillars of less than 50 nm diameter have been irradiated in a helium ion microscope with a focused Ne$^+$ beam. The morphological changes due to ion beam irradiation at room temperature and elevated temperatures have been studied with the transmission electron microscope. We found that the shape changes of the nanopillars depend on irradiation-induced amorphization and thermally driven dynamic annealing. While at room temperature, the nanopillars evolve to a conical shape due to ion-induced plastic deformation and viscous flow of amorphized Si, simultaneous dynamic annealing during the irradiation at elevated temperatures prevents amorphization which is necessary for the viscous flow. Above the critical temperature of ion-induced amorphization, a steady decrease of the diameter was observed as a result of the dominating forward sputtering process through the nanopillar sidewalls. Under these conditions the nanopillars can be thinned down to a diameter of 10 nm in a well-controlled manner. A deeper understanding of the pillar thinning process has been achieved by a comparison of experimental results with 3D computer simulations based on the binary collision approximation.
△ Less
Submitted 1 October, 2019; v1 submitted 24 June, 2019;
originally announced June 2019.
-
Process estimation in qubit systems: a quantum decision theory approach
Authors:
Ivan Maffeis,
Seid Koudia,
Abdelhakim Gharbi,
Matteo G. A. Paris
Abstract:
We address quantum decision theory as a convenient framework to analyze process discrimination and estimation in qubit systems. In particular we discuss the following problems: i) how to discriminate whether or not a given unitary perturbation has been applied to a qubit system; ii) how to determine the amplitude of the minimum detectable perturbation. In order to solve the first problem, we explo…
▽ More
We address quantum decision theory as a convenient framework to analyze process discrimination and estimation in qubit systems. In particular we discuss the following problems: i) how to discriminate whether or not a given unitary perturbation has been applied to a qubit system; ii) how to determine the amplitude of the minimum detectable perturbation. In order to solve the first problem, we exploit the so-called Bayes strategy, and look for the optimal measurement to discriminate, with minimum error probability, whether or not the unitary transformation has been applied to a given signal. Concerning the second problem, the strategy of Neyman and Pearson is used to determine the ultimate bound posed by quantum mechanics to the minimum detectable amplitude of the qubit transformation. We consider both pure and mixed initial preparations of the qubit, and solve the corresponding binary decision problems. We also analyze the use of entangled qubits in the estimation protocol and found that entanglement, in general, improves stability rather than precision. Finally, we take into account the possible occurrence of different kinds of background noise and evaluate the corresponding effects on the discrimination strategies.
△ Less
Submitted 18 May, 2019; v1 submitted 5 March, 2019;
originally announced March 2019.
-
Quantum state engineering by non-deterministic noiseless linear amplification
Authors:
Hamza Adnane,
Matteo Bina,
Francesco Albarelli,
Abdelhakim Gharbi,
Matteo G. A. Paris
Abstract:
We address quantum state engineering of single- and two-mode states by means of non-deterministic noiseless linear amplifiers (NLAs) acting on Gaussian states. In particular, we show that NLAs provide an effective scheme to generate highly non-Gaussian and non-classical states. Additionally, we show that the amplification of a two-mode squeezed vacuum state (twin-beam) may highly increase entangle…
▽ More
We address quantum state engineering of single- and two-mode states by means of non-deterministic noiseless linear amplifiers (NLAs) acting on Gaussian states. In particular, we show that NLAs provide an effective scheme to generate highly non-Gaussian and non-classical states. Additionally, we show that the amplification of a two-mode squeezed vacuum state (twin-beam) may highly increase entanglement.
△ Less
Submitted 29 January, 2019;
originally announced January 2019.
-
Characterizing non-deterministic noiseless linear amplifiers at the quantum limit
Authors:
Hamza Adnane,
Francesco Albarelli,
Abdelhakim Gharbi,
Matteo G. A Paris
Abstract:
We address the characterization of the gain parameter of a non-deterministic noiseless linear amplifier (NLA) and compare the performances of different estimation strategies using tools from quantum estimation theory. At first, we show that, contrary to naive expectations, post-selecting only the amplified states does not offer the most accurate estimate. We then focus on minimal implementations o…
▽ More
We address the characterization of the gain parameter of a non-deterministic noiseless linear amplifier (NLA) and compare the performances of different estimation strategies using tools from quantum estimation theory. At first, we show that, contrary to naive expectations, post-selecting only the amplified states does not offer the most accurate estimate. We then focus on minimal implementations of a NLA, i.e. those obtained by coupling the input state to a two-level system, and show that the maximal amount of information about the gain of the NLA is obtained by measuring the whole composite system. The quantum Fisher information (QFI) of this best-case scenario is analysed in some details, and compared to the QFI of the post-selected states, both for successful and unsuccessful amplification. Eventually, we show that full extraction of the available information is achieved when the non-deterministic process is implemented by a Lüders instrument. We also analyse the precision attainable by probing NLAs by single-mode pure states and measuring the field or the number of quanta, and discuss in some details the specific cases of squeezed vacuum and coherent states.
△ Less
Submitted 22 January, 2019;
originally announced January 2019.
-
Elastocapillary driven assembly of particles at free-standing smectic-A films
Authors:
Mohamed Amine Gharbi,
Daniel A. Beller,
Nima Sharifi-Mood,
Rohini Gupta,
Randall D. Kamien,
Shu Yang,
Kathleen J. Stebe
Abstract:
Colloidal particles at complex fluid interfaces and within films assemble to form ordered structures with high degrees of symmetry via interactions that include capillarity, elasticity, and other fields like electrostatic charge. Here we study microparticle interactions within free-standing smectic-A films, in which the elasticity arising from the director field distortion and capillary interactio…
▽ More
Colloidal particles at complex fluid interfaces and within films assemble to form ordered structures with high degrees of symmetry via interactions that include capillarity, elasticity, and other fields like electrostatic charge. Here we study microparticle interactions within free-standing smectic-A films, in which the elasticity arising from the director field distortion and capillary interactions arising from interface deformation compete to direct the assembly of motile particles. New colloidal assemblies and patterns, ranging from 1D chains to 2D aggregates, sensitive to the initial wetting conditions of particles at the smectic film, are reported. This work paves the way to exploiting LC interfaces as a means to direct spontaneously formed, reconfigurable, and optically active materials.
△ Less
Submitted 23 January, 2018; v1 submitted 24 September, 2017;
originally announced September 2017.
-
Curvature-driven, One-step Assembly of Reconfigurable Smectic Liquid Crystal "Compound Eye" Lenses
Authors:
Francesca Serra,
Mohamed A. Gharbi,
Yimin Luo,
Iris B. Liu,
Nathan D. Bade,
Randall D. Kamien,
Shu Yang,
Kathleen J. Stebe
Abstract:
Confined smectic A liquid crystals (SmA LCs) form topological defects called focal conic domains (FCDs) that focus light as gradient-index lenses. Here, we exploit surface curvature to self-assemble FCDs in a single step into a hierarchical structure (coined "flower pattern") molded by the fluid interface that is pinned at the top of a micropillar. The structure resembles the compound eyes of some…
▽ More
Confined smectic A liquid crystals (SmA LCs) form topological defects called focal conic domains (FCDs) that focus light as gradient-index lenses. Here, we exploit surface curvature to self-assemble FCDs in a single step into a hierarchical structure (coined "flower pattern") molded by the fluid interface that is pinned at the top of a micropillar. The structure resembles the compound eyes of some invertebrates, which consist of hundreds of microlenses on a curved interface, able to focus and construct images in three dimensions. Here we demonstrate that these flowers are indeed "compound eyes" with important features which have not been demonstrated previously in the literature. The eccentric FCDs gradually change in size with radial distance from the edge of the micropillar, resulting in a variable microlens focal length that ranges from a few microns to a few tens of microns within a single "flower". We show that the microlenses can construct a composite 3D image from different depth of field. Moreover, the smectic "compound eye" can be reconfigured by heating and cooling at the LC phase transition temperature; its field of view can be manipulated by tuning the curvature of the LC interface, and the lenses are sensitive to light polarization.
△ Less
Submitted 6 May, 2015;
originally announced May 2015.
-
Shape-controlled orientation and assembly of colloids with sharp edges in nematic liquid crystals
Authors:
Daniel A. Beller,
Mohamed A. Gharbi,
Iris B. Liu
Abstract:
The assembly of colloids in nematic liquid crystals via topological defects has been extensively studied for spherical particles, and investigations of other colloid shapes have revealed a wide array of new assembly behaviors. We show, using Landau-de Gennes numerical modeling, that nematic defect configurations and colloidal assembly can be strongly influenced by fine details of colloid shape, in…
▽ More
The assembly of colloids in nematic liquid crystals via topological defects has been extensively studied for spherical particles, and investigations of other colloid shapes have revealed a wide array of new assembly behaviors. We show, using Landau-de Gennes numerical modeling, that nematic defect configurations and colloidal assembly can be strongly influenced by fine details of colloid shape, in particular the presence of sharp edges. For cylinder, microbullet, and cube colloid geometries, we obtain the particles' equilibrium alignment directions and effective pair interaction potentials as a function of simple shape parameters. We find that defects pin at sharp edges, and that the colloid consequently orients at an oblique angle relative to the far-field nematic director that depends on the colloid's shape. This shape-dependent alignment, which we confirm in experimental measurements, raises the possibility of selecting self-assembly outcomes for colloids in liquid crystals by tuning particle geometry.
△ Less
Submitted 12 December, 2014; v1 submitted 25 August, 2014;
originally announced August 2014.
-
Energy spectra of Hartmann and ring-shaped oscillator potentials using the quantum Hamilton-Jacobi formalism
Authors:
Abdelhakim Gharbi,
Ahmed Bouda
Abstract:
In the present work, we apply the exact quantization condition, introduced within the framework of Padgett and Leacock's quantum Hamilton-Jacobi formalism, to angular and radial quantum action variables in the context of the Hartmann and the ring-shaped oscillator potentials which are separable and non central. The energy spectra of the two systems are exactly obtained.
In the present work, we apply the exact quantization condition, introduced within the framework of Padgett and Leacock's quantum Hamilton-Jacobi formalism, to angular and radial quantum action variables in the context of the Hartmann and the ring-shaped oscillator potentials which are separable and non central. The energy spectra of the two systems are exactly obtained.
△ Less
Submitted 30 November, 2013;
originally announced December 2013.
-
Focal Conic Flower Textures at Curved Interfaces
Authors:
Daniel A. Beller,
Mohamed A. Gharbi,
Apiradee Honglawan,
Kathleen J. Stebe,
Shu Yang,
Randall D. Kamien
Abstract:
Focal conic domains (FCDs) in smectic-A liquid crystals have drawn much attention both for their exquisitely structured internal form and for their ability to direct the assembly of micro- and nanomaterials in a variety of patterns. A key to directing FCD assembly is control over the eccentricity of the domain. Here, we demonstrate a new paradigm for creating spatially varying FCD eccentricity by…
▽ More
Focal conic domains (FCDs) in smectic-A liquid crystals have drawn much attention both for their exquisitely structured internal form and for their ability to direct the assembly of micro- and nanomaterials in a variety of patterns. A key to directing FCD assembly is control over the eccentricity of the domain. Here, we demonstrate a new paradigm for creating spatially varying FCD eccentricity by confining a hybrid-aligned smectic with curved interfaces. In particular, we manipulate interface behavior with colloidal particles in order to experimentally produce two examples of what has recently been dubbed the flower texture, where the focal hyperbolae diverge radially outward from the center of the texture, rather than inward as in the canonical eventail or fan texture. We explain how this unconventional assembly can arise from appropriately curved interfaces. Finally, we present a model for this system that applies the law of corresponding cones, showing how FCDs may be embedded smoothly within a "background texture" of large FCDs and concentric spherical layers, in a manner consistent with the qualitative features of the smectic flower. Such understanding could potentially lead to disruptive liquid crystal technologies beyond displays, including patterning, smart surfaces, microlens arrays, sensors and nanomanufacturing.
△ Less
Submitted 24 October, 2013;
originally announced October 2013.
-
Exploiting imperfections: Directed assembly of surface colloids via bulk topological defects
Authors:
Marcello Cavallaro Jr.,
Mohamed A. Gharbi,
Daniel A. Beller,
Simon Čopar,
Zheng Shi,
Tobias Baumgart,
Shu Yang,
Randall D. Kamien,
Kathleen J. Stebe
Abstract:
We exploit the long-ranged elastic fields inherent to confined nematic liquid crystals to assemble colloidal particles trapped at the liquid crystal interface into reconfigurable structures with complex symmetries and packings. Spherical colloids with homeotropic anchoring trapped at the interface between air and the nematic liquid crystal 5CB create quadrupolar distortions in the director field c…
▽ More
We exploit the long-ranged elastic fields inherent to confined nematic liquid crystals to assemble colloidal particles trapped at the liquid crystal interface into reconfigurable structures with complex symmetries and packings. Spherical colloids with homeotropic anchoring trapped at the interface between air and the nematic liquid crystal 5CB create quadrupolar distortions in the director field causing particles to repel and consequently form close-packed assemblies with a triangular habit. Here we report on complex, open structures organized via interactions with defects in the bulk. Specifically, by confining the nematic liquid crystal in an array of microposts with homeotropic anchoring conditions, we cause defect rings to form at well-defined locations in the bulk of the sample. These defects source elastic deformations that direct the assembly of the interfacially-trapped colloids into ring-like assemblies, which recapitulate the defect geometry even when the microposts are completely immersed in the nematic. When the surface density of the colloids is high, they form a ring near the defect and a hexagonal lattice far from it. Since topographically complex substrates are easily fabricated and liquid crystal defects are readily reconfigured, this work lays the foundation for a new, robust mechanism to dynamically direct assembly over large areas by controlling surface anchoring and associated bulk defect structure.
△ Less
Submitted 24 September, 2013; v1 submitted 11 August, 2013;
originally announced August 2013.
-
Ring around the colloid
Authors:
Marcello Cavallaro Jr.,
Mohamed A. Gharbi,
Daniel A. Beller,
Simon Čopar,
Zheng Shi,
Randall D. Kamien,
Shu Yang,
Tobias Baumgart,
Kathleen J. Stebe
Abstract:
In this work, we show that Janus washers, genus-one colloids with hybrid anchoring conditions, form topologically required defects in nematic liquid crystals. Experiments under crossed polarizers reveal the defect structure to be a rigid disclination loop confined within the colloid, with an accompanying defect in the liquid crystal. When confined to a homeotropic cell, the resulting colloid-defec…
▽ More
In this work, we show that Janus washers, genus-one colloids with hybrid anchoring conditions, form topologically required defects in nematic liquid crystals. Experiments under crossed polarizers reveal the defect structure to be a rigid disclination loop confined within the colloid, with an accompanying defect in the liquid crystal. When confined to a homeotropic cell, the resulting colloid-defect ring pair tilts relative to the far field director, in contrast to the behavior of toroidal colloids with purely homeotropic anchoring. We show that this tilting behavior can be reversibly suppressed by the introduction of a spherical colloid into the center of the toroid, creating a new kind of multi-shape colloidal assemblage.
△ Less
Submitted 8 June, 2013; v1 submitted 28 April, 2013;
originally announced April 2013.
-
Micro-Bullet Assembly: Interactions of Oriented Dipoles in Confined Nematic Liquid Crystal
Authors:
Mohamed Amine Gharbi,
Marcello Cavallaro, Jr.,
Gaoxiang Wu,
Daniel A. Beller,
Randall D. Kamien,
Shu Yang,
Kathleen J. Stebe
Abstract:
Microbullet particles, cylinders with one blunt and one spherical end, offer a novel platform to study the effects of anisotropy and curvature on colloidal assembly in complex fluids. Here, we disperse microbullets in 4-cyano-4'-pentylbiphenyl (5CB) nematic liquid crystal (NLC) cells and form oriented elastic dipoles with a nematic point defect located near the curved end. This feature allows us t…
▽ More
Microbullet particles, cylinders with one blunt and one spherical end, offer a novel platform to study the effects of anisotropy and curvature on colloidal assembly in complex fluids. Here, we disperse microbullets in 4-cyano-4'-pentylbiphenyl (5CB) nematic liquid crystal (NLC) cells and form oriented elastic dipoles with a nematic point defect located near the curved end. This feature allows us to study particle interactions as a function of dipole alignment. By careful control of the surface anchoring at the particle surface and the confining boundaries, we study the interactions and assembly of microbullets under various conditions. When microbullets with homeotropic surface anchoring are dispersed in a planar cell, parallel dipoles form linear chains parallel to the director, similar to the observations of spherical particles in a planar cell, while antiparallel dipoles orient side-to-side. In a homeotropic cell, however, particles rotate to orient their long axis parallel to the director. When so aligned, parallel dipoles repel and form 2D ordered assemblies with hexagonal symmetry that ripen over time owing to attraction between antiparallel neighbors. Further, we show that the anchoring conditions inside the cell can be altered by application of an electrical field, allowing us to flip microbullets to orient parallel to the director, an effect driven by an elastic torque. Finally, we detail the mechanisms that control the formation of 1D chains and hexagonal lattices with respect to the elasticity of the NLC.
△ Less
Submitted 3 January, 2013; v1 submitted 5 October, 2012;
originally announced October 2012.
-
Behavior of colloidal particles at an air/nematic liquid crystal interface
Authors:
M. A. Gharbi,
M. Nobili,
M. In,
G. Prévot,
P. Galatola,
J. B. Fournier,
Ch. Blanc
Abstract:
We examine the behavior of spherical silica particles trapped at an air-nematic liquid crystal interface. When a strong normal anchoring is imposed, the beads spontaneously form various structures depending on their area density and the nematic thickness. Using optical tweezers, we determine the pair potential and explain the formation of these patterns. The energy profile is discussed in terms of…
▽ More
We examine the behavior of spherical silica particles trapped at an air-nematic liquid crystal interface. When a strong normal anchoring is imposed, the beads spontaneously form various structures depending on their area density and the nematic thickness. Using optical tweezers, we determine the pair potential and explain the formation of these patterns. The energy profile is discussed in terms of capillary and elastic interactions. Finally, we detail the mechanisms that control the formation of an hexagonal lattice and analyze the role of gravity for curved interfaces.
△ Less
Submitted 4 July, 2010;
originally announced July 2010.
-
Extension of the Hamaneh - Taylor model using the macroscopic polarization for the description of chiral smectic liquid crystals
Authors:
Hassen Dhaouadi,
Nabila Bitri,
Sahbi Essid,
Taoufik Soltani,
Abdelhafidh Gharbi,
Jean-Paul Marcerou
Abstract:
Chiral smectic liquid crystals exhibit a series of phases, including ferroelectric, antiferroelectric and ferrielectric commensurate structures as well as an incommensurate SmCalpha phase. We carried out an extension of the phenomenological model, recently presented by M. B. Hamaneh and P. L. Taylor, based upon the distorted clock model.
Chiral smectic liquid crystals exhibit a series of phases, including ferroelectric, antiferroelectric and ferrielectric commensurate structures as well as an incommensurate SmCalpha phase. We carried out an extension of the phenomenological model, recently presented by M. B. Hamaneh and P. L. Taylor, based upon the distorted clock model.
△ Less
Submitted 12 October, 2009; v1 submitted 5 June, 2009;
originally announced June 2009.
-
Quantum Law of Motion: Analysis and Extension to Higher Dimensions
Authors:
A. Bouda,
A. Gharbi
Abstract:
In this paper, we review the recently formulated quantum laws of motion and provide new observations. We also extend these laws to higher dimensions. By applying in two dimensions the obtained relations to charge submitted to an electric central potential, we decide between these laws. Furthermore, we extend the selected law to the relativistic case in higher dimensions.
In this paper, we review the recently formulated quantum laws of motion and provide new observations. We also extend these laws to higher dimensions. By applying in two dimensions the obtained relations to charge submitted to an electric central potential, we decide between these laws. Furthermore, we extend the selected law to the relativistic case in higher dimensions.
△ Less
Submitted 5 October, 2008;
originally announced October 2008.