-
Modes, Bounds, and Synthesis of Optimal Electromagnetic Scatterers
Authors:
Mats Gustafsson
Abstract:
This paper presents an optimal synthesis of material distributions in obstacles for maximal extinction, scattering, or absorption. The material synthesis is based on an explicit construction utilizing the current distribution derived from physical bounds excited from the far-field. The bounds are expressed in radiation modes for materials restricted by their resistivity and characteristic modes fo…
▽ More
This paper presents an optimal synthesis of material distributions in obstacles for maximal extinction, scattering, or absorption. The material synthesis is based on an explicit construction utilizing the current distribution derived from physical bounds excited from the far-field. The bounds are expressed in radiation modes for materials restricted by their resistivity and characteristic modes for materials restricted by the contrast. The results are valid for arbitrary shapes, and analytical expressions are provided for spherical shapes.
△ Less
Submitted 19 May, 2024;
originally announced May 2024.
-
Degrees of Freedom for Radiating Systems
Authors:
Mats Gustafsson
Abstract:
Electromagnetic degrees of freedom are instrumental in antenna design, wireless communications, imaging, and scattering. Larger number of degrees of freedom enhances control in antenna design, influencing radiation patterns and directivity, while in communication systems, it links to spatial channels for increased data rates and reliability, and resolution in imaging. The correlation between compu…
▽ More
Electromagnetic degrees of freedom are instrumental in antenna design, wireless communications, imaging, and scattering. Larger number of degrees of freedom enhances control in antenna design, influencing radiation patterns and directivity, while in communication systems, it links to spatial channels for increased data rates and reliability, and resolution in imaging. The correlation between computed degrees of freedom and physical quantities is not fully understood, prompting a comparison between classical estimates, Weyl's law, modal expansions, and optimization techniques. In this paper, it is shown that NDoF for arbitrary shaped radiating structures approaches the shadow area measured in squared wavelengths.
△ Less
Submitted 13 April, 2024;
originally announced April 2024.
-
Radiation Efficiency and Gain Bounds for Microstrip Patch Antennas
Authors:
Ben A. P. Nel,
Anja K. Skrivervik,
Mats Gustafsson
Abstract:
This paper presents radiation efficiency and gain bounds for microstrip patch antennas. The presented bounds are shown to be good predictors of antenna performance. Using the bounds, patch miniaturization techniques based on high permittivity substrates and geometrical shaping are compared. Further, a semi-analytic model is developed to approximate the bounds. Measurements are used to validate the…
▽ More
This paper presents radiation efficiency and gain bounds for microstrip patch antennas. The presented bounds are shown to be good predictors of antenna performance. Using the bounds, patch miniaturization techniques based on high permittivity substrates and geometrical shaping are compared. Further, a semi-analytic model is developed to approximate the bounds. Measurements are used to validate the bounds. Finally, maximum bandwidth of a microstrip patch antenna is linked to its maximum radiation efficiency.
△ Less
Submitted 4 March, 2024;
originally announced March 2024.
-
Theory and Computation of Substructure Characteristic Modes
Authors:
Mats Gustafsson,
Lukas Jelinek,
Miloslav Capek,
Johan Lundgren,
Kurt Schab
Abstract:
The problem of substructure characteristic modes is reformulated using a scattering matrix-based formulation, generalizing subregion characteristic mode decomposition to arbitrary computational tools. It is shown that the scattering formulation is identical to the classical formulation based on the background Green's function for lossless systems. The scattering formulation, however, opens a varie…
▽ More
The problem of substructure characteristic modes is reformulated using a scattering matrix-based formulation, generalizing subregion characteristic mode decomposition to arbitrary computational tools. It is shown that the scattering formulation is identical to the classical formulation based on the background Green's function for lossless systems. The scattering formulation, however, opens a variety of new subregion scenarios unavailable within previous formulations, including cases with lumped or wave ports or subregions in circuits. Thanks to its scattering nature, the formulation is solver-agnostic with the possibility to utilize an arbitrary full-wave method.
△ Less
Submitted 22 February, 2024;
originally announced March 2024.
-
Characteristic Modes of Nonreciprocal Structures
Authors:
Niklas Wingren,
Daniel Sjöberg,
Mats Gustafsson,
Johan Lundgren,
Miloslav Capek,
Lukas Jelinek,
Kurt Schab
Abstract:
The scattering formulation of characteristic mode decomposition is utilized to extend modal analysis to lossless scatterers breaking time-reversal symmetry. This enables characteristic modes analysis on devices containing gyrotropic or moving media. The resulting nonreciprocity introduces features not observed in reciprocal scenarios, such as asymmetric phase progression in characteristic far fiel…
▽ More
The scattering formulation of characteristic mode decomposition is utilized to extend modal analysis to lossless scatterers breaking time-reversal symmetry. This enables characteristic modes analysis on devices containing gyrotropic or moving media. The resulting nonreciprocity introduces features not observed in reciprocal scenarios, such as asymmetric phase progression in characteristic far fields. These new phenomena are carefully discussed using examples of varying complexity. Indicators of nonreciprocity based on modal data are also introduced.
△ Less
Submitted 22 December, 2023;
originally announced December 2023.
-
Characteristic Modes of Frequency-Selective Surfaces and Metasurfaces from S-parameter Data
Authors:
Kurt Schab,
Frederick Chen,
Lukas Jelinek,
Miloslav Capek,
Johan Lundgren,
Mats Gustafsson
Abstract:
Characteristic modes of arbitrary two-dimensional periodic systems are analyzed using scattering parameter data. This approach bypasses the need for periodic integral equations and allows for characteristic modes to be computed from generic simulation or measurement data. Example calculations demonstrate the efficacy of the method through comparison against a periodic method of moments formulation…
▽ More
Characteristic modes of arbitrary two-dimensional periodic systems are analyzed using scattering parameter data. This approach bypasses the need for periodic integral equations and allows for characteristic modes to be computed from generic simulation or measurement data. Example calculations demonstrate the efficacy of the method through comparison against a periodic method of moments formulation for a simple, single-layer conducting unit cell. The effect of vertical structure and electrical size on the number of modes is studied and its discrete nature is verified with example calculations. % Additional examples verify the binary impact of vertical structure on the number of radiating characteristic modes. A multiband polarization-selective surface and a beamsteering metasurface are presented as additional examples.
△ Less
Submitted 9 October, 2023;
originally announced October 2023.
-
The Third Fermi Large Area Telescope Catalog of Gamma-ray Pulsars
Authors:
David A. Smith,
Philippe Bruel,
Colin J. Clark,
Lucas Guillemot,
Matthew T. Kerr,
Paul Ray,
Soheila Abdollahi,
Marco Ajello,
Luca Baldini,
Jean Ballet,
Matthew Baring,
Cees Bassa,
Josefa Becerra Gonzalez,
Ronaldo Bellazzini,
Alessandra Berretta,
Bhaswati Bhattacharyya,
Elisabetta Bissaldi,
Raffaella Bonino,
Eugenio Bottacini,
Johan Bregeon,
Marta Burgay,
Toby Burnett,
Rob Cameron,
Fernando Camilo,
Regina Caputo
, et al. (134 additional authors not shown)
Abstract:
We present 294 pulsars found in GeV data from the Large Area Telescope (LAT) on the Fermi Gamma-ray Space Telescope. Another 33 millisecond pulsars (MSPs) discovered in deep radio searches of LAT sources will likely reveal pulsations once phase-connected rotation ephemerides are achieved. A further dozen optical and/or X-ray binary systems co-located with LAT sources also likely harbor gamma-ray M…
▽ More
We present 294 pulsars found in GeV data from the Large Area Telescope (LAT) on the Fermi Gamma-ray Space Telescope. Another 33 millisecond pulsars (MSPs) discovered in deep radio searches of LAT sources will likely reveal pulsations once phase-connected rotation ephemerides are achieved. A further dozen optical and/or X-ray binary systems co-located with LAT sources also likely harbor gamma-ray MSPs. This catalog thus reports roughly 340 gamma-ray pulsars and candidates, 10% of all known pulsars, compared to $\leq 11$ known before Fermi. Half of the gamma-ray pulsars are young. Of these, the half that are undetected in radio have a broader Galactic latitude distribution than the young radio-loud pulsars. The others are MSPs, with 6 undetected in radio. Overall, >235 are bright enough above 50 MeV to fit the pulse profile, the energy spectrum, or both. For the common two-peaked profiles, the gamma-ray peak closest to the magnetic pole crossing generally has a softer spectrum. The spectral energy distributions tend to narrow as the spindown power $\dot E$ decreases to its observed minimum near $10^{33}$ erg s$^{-1}$, approaching the shape for synchrotron radiation from monoenergetic electrons. We calculate gamma-ray luminosities when distances are available. Our all-sky gamma-ray sensitivity map is useful for population syntheses. The electronic catalog version provides gamma-ray pulsar ephemerides, properties and fit results to guide and be compared with modeling results.
△ Less
Submitted 20 July, 2023;
originally announced July 2023.
-
Fermi-GBM Discovery of GRB 221009A: An Extraordinarily Bright GRB from Onset to Afterglow
Authors:
S. Lesage,
P. Veres,
M. S. Briggs,
A. Goldstein,
D. Kocevski,
E. Burns,
C. A. Wilson-Hodge,
P. N. Bhat,
D. Huppenkothen,
C. L. Fryer,
R. Hamburg,
J. Racusin,
E. Bissaldi,
W. H. Cleveland,
S. Dalessi,
C. Fletcher,
M. M. Giles,
B. A. Hristov,
C. M. Hui,
B. Mailyan,
C. Malacaria,
S. Poolakkil,
O. J. Roberts,
A. von Kienlin,
J. Wood
, et al. (115 additional authors not shown)
Abstract:
We report the discovery of GRB 221009A, the highest flux gamma-ray burst ever observed by the Fermi Gamma-ray Burst Monitor (GBM). This GRB has continuous prompt emission lasting more than 600 seconds which smoothly transitions to afterglow visible in the GBM energy range (8 keV--40 MeV), and total energetics higher than any other burst in the GBM sample. By using a variety of new and existing ana…
▽ More
We report the discovery of GRB 221009A, the highest flux gamma-ray burst ever observed by the Fermi Gamma-ray Burst Monitor (GBM). This GRB has continuous prompt emission lasting more than 600 seconds which smoothly transitions to afterglow visible in the GBM energy range (8 keV--40 MeV), and total energetics higher than any other burst in the GBM sample. By using a variety of new and existing analysis techniques we probe the spectral and temporal evolution of GRB 221009A. We find no emission prior to the GBM trigger time (t0; 2022 October 9 at 13:16:59.99 UTC), indicating that this is the time of prompt emission onset. The triggering pulse exhibits distinct spectral and temporal properties suggestive of the thermal, photospheric emission of shock-breakout, with significant emission up to $\sim$15 MeV. We characterize the onset of external shock at t0+600 s and find evidence of a plateau region in the early-afterglow phase which transitions to a slope consistent with Swift-XRT afterglow measurements. We place the total energetics of GRB 221009A in context with the rest of the GBM sample and find that this GRB has the highest total isotropic-equivalent energy ($\textrm{E}_{γ,\textrm{iso}}=1.0\times10^{55}$ erg) and second highest isotropic-equivalent luminosity ($\textrm{L}_{γ,\textrm{iso}}=9.9\times10^{53}$ erg/s) based on redshift of z = 0.151. These extreme energetics are what allowed us to observe the continuously emitting central engine of GBM from the beginning of the prompt emission phase through the onset of early afterglow.
△ Less
Submitted 12 July, 2023; v1 submitted 24 March, 2023;
originally announced March 2023.
-
Search for neutrino lines from dark matter annihilation and decay with IceCube
Authors:
The IceCube Collaboration,
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
V. Basu,
R. Bay,
J. J. Beatty,
K. -H. Becker,
J. Becker Tjus,
J. Beise
, et al. (373 additional authors not shown)
Abstract:
Dark Matter particles in the Galactic Center and halo can annihilate or decay into a pair of neutrinos producing a monochromatic flux of neutrinos. The spectral feature of this signal is unique and it is not expected from any astrophysical production mechanism. Its observation would constitute a dark matter smoking gun signal. We performed the first dedicated search with a neutrino telescope for s…
▽ More
Dark Matter particles in the Galactic Center and halo can annihilate or decay into a pair of neutrinos producing a monochromatic flux of neutrinos. The spectral feature of this signal is unique and it is not expected from any astrophysical production mechanism. Its observation would constitute a dark matter smoking gun signal. We performed the first dedicated search with a neutrino telescope for such signal, by looking at both the angular and energy information of the neutrino events. To this end, a total of five years of IceCube's DeepCore data has been used to test dark matter masses ranging from 10~GeV to 40~TeV. No significant neutrino excess was found and upper limits on the annihilation cross section, as well as lower limits on the dark matter lifetime, were set. The limits reached are of the order of $10^{-24}$~cm$^3/s$ for an annihilation and up to $10^{27}$ seconds for decaying Dark Matter. Using the same data sample we also derive limits for dark matter annihilation or decay into a pair of Standard Model charged particles.
△ Less
Submitted 23 March, 2023;
originally announced March 2023.
-
The Fermi-LAT Light Curve Repository
Authors:
S. Abdollahi,
M. Ajello,
L. Baldini,
J. Ballet,
D. Bastieri,
J. Becerra Gonzalez,
R. Bellazzini,
A. Berretta,
E. Bissaldi,
R. Bonino,
A. Brill,
P. Bruel,
E. Burns,
S. Buson,
A. Cameron,
R. Caputo,
P. A. Caraveo,
N. Cibrario,
S. Ciprini,
P. Cristarella Orestano,
M. Crnogorcevic,
S. Cutini,
F. D'Ammando,
S. De Gaetano,
S. W. Digel
, et al. (88 additional authors not shown)
Abstract:
The Fermi Large Area Telescope (LAT) light curve repository (LCR) is a publicly available, continually updated library of gamma-ray light curves of variable Fermi-LAT sources generated over multiple timescales. The Fermi-LAT LCR aims to provide publication-quality light curves binned on timescales of 3 days, 7 days, and 30 days for 1525 sources deemed variable in the source catalog of the first 10…
▽ More
The Fermi Large Area Telescope (LAT) light curve repository (LCR) is a publicly available, continually updated library of gamma-ray light curves of variable Fermi-LAT sources generated over multiple timescales. The Fermi-LAT LCR aims to provide publication-quality light curves binned on timescales of 3 days, 7 days, and 30 days for 1525 sources deemed variable in the source catalog of the first 10 years of Fermi-LAT observations. The repository consists of light curves generated through full likelihood analyses that model the sources and the surrounding region, providing fluxes and photon indices for each time bin. The LCR is intended as a resource for the time-domain and multi-messenger communities by allowing users to quickly search LAT data to identify correlated variability and flaring emission episodes from gamma-ray sources. We describe the sample selection and analysis employed by the LCR and provide an overview of the associated data access portal.
△ Less
Submitted 14 February, 2023; v1 submitted 4 January, 2023;
originally announced January 2023.
-
Iterative Calculation of Characteristic Modes Using Arbitrary Full-wave Solvers
Authors:
Johan Lundgren,
Kurt Schab,
Miloslav Capek,
Mats Gustafsson,
Lukas Jelinek
Abstract:
An iterative algorithm is adopted to construct approximate representations of matrices describing the scattering properties of arbitrary objects. The method is based on the implicit evaluation of scattering responses from iteratively generated excitations. The method does not require explicit knowledge of any system matrices (e.g., stiffness or impedance matrices) and is well-suited for use with m…
▽ More
An iterative algorithm is adopted to construct approximate representations of matrices describing the scattering properties of arbitrary objects. The method is based on the implicit evaluation of scattering responses from iteratively generated excitations. The method does not require explicit knowledge of any system matrices (e.g., stiffness or impedance matrices) and is well-suited for use with matrix-free and iterative full-wave solvers, such as FDTD, FEM, and MLFMA. The proposed method allows for significant speed-up compared to the direct construction of a full transition matrix or scattering dyadic. The method is applied to the characteristic mode decomposition of arbitrarily shaped obstacles of arbitrary material distribution. Examples demonstrating the speed-up and complexity of the algorithm are studied with several commercial software packages.
△ Less
Submitted 31 August, 2022;
originally announced September 2022.
-
Ultralow voltage, High-speed, and Energy-efficient Cryogenic Electro-Optic Modulator
Authors:
Paolo Pintus,
Anshuman Singh,
Weiqiang Xie,
Leonardo Ranzani,
Martin V. Gustafsson,
Minh A. Tran,
Chao Xiang,
Jonathan Peters,
John E. Bowers,
Moe Soltani
Abstract:
Photonic integrated circuits (PICs) at cryogenic temperatures enable a wide range of applications in scalable classical and quantum systems for computing and sensing. A promising application of cryogenic PICs is to provide optical interconnects by up-converting signals from electrical to optical domain, allowing massive data-transfer from 4 K superconducting (SC) electronics to room temperature en…
▽ More
Photonic integrated circuits (PICs) at cryogenic temperatures enable a wide range of applications in scalable classical and quantum systems for computing and sensing. A promising application of cryogenic PICs is to provide optical interconnects by up-converting signals from electrical to optical domain, allowing massive data-transfer from 4 K superconducting (SC) electronics to room temperature environment. Such a solution is central to overcome the major bottleneck in the scalability of cryogenic systems, which currently rely on bulky copper cables that suffer from limited bandwidth, large heat load, and do not show any scalability path. A key element for realizing a cryogenic-to-room temperature optical interconnect is a high-speed electro-optic (EO) modulator operating at 4 K with operation voltage at mV scale, compatible with SC electronics. Although several cryogenic EO modulators have been demonstrated, their driving voltages are significantly large compared to the mV scale voltage required for SC circuits. Here, we demonstrate a cryogenic modulator with ~10 mV peak-to-peak driving voltage and gigabits/sec data rate, with ultra-low electric and optical energy consumptions of ~10.4 atto-joules/bit and ~213 femto-joules/bit, respectively. We achieve this record performance by designing a compact optical ring resonator modulator in a heterogeneous InP-on-Silicon platform, where we optimize a multi-quantum well layer of InAIGaAs to achieve a strong EO effect at 4 K. Unlike other semiconductors such as silicon, our platform benefits from the high-carrier mobility and minimal free carrier freezing of III-V compounds at low temperatures, with moderate doping level and low loss (intrinsic resonator Q~272,000). These modulators can pave the path for complex cryogenic photonic functionalities and massive data transmission between cryogenic and room-temperature electronics.
△ Less
Submitted 7 July, 2022;
originally announced July 2022.
-
Characteristic Mode Decomposition Using the Scattering Dyadic in Arbitrary Full-Wave Solvers
Authors:
Miloslav Capek,
Johan Lundgren,
Mats Gustafsson,
Kurt Schab,
Lukas Jelinek
Abstract:
Characteristic modes are formulated using the scattering dyadic, which maps incident plane waves to scattered far fields generated by an object of arbitrary material composition. Numerical construction of the scattering dyadic using arbitrary full-wave electromagnetic solvers is demonstrated in examples involving a variety of dielectric and magnetic materials. Wrapper functions for computing chara…
▽ More
Characteristic modes are formulated using the scattering dyadic, which maps incident plane waves to scattered far fields generated by an object of arbitrary material composition. Numerical construction of the scattering dyadic using arbitrary full-wave electromagnetic solvers is demonstrated in examples involving a variety of dielectric and magnetic materials. Wrapper functions for computing characteristic modes in method-of-moments, finite-difference time domain, and finite element solvers are provided as supplementary material.
△ Less
Submitted 29 September, 2022; v1 submitted 10 June, 2022;
originally announced June 2022.
-
Search for new cosmic-ray acceleration sites within the 4FGL catalog Galactic plane sources
Authors:
Fermi-LAT Collaboration,
S. Abdollahi,
F. Acero,
M. Ackermann,
L. Baldini,
J. Ballet,
G. Barbiellini,
D. Bastieri,
R. Bellazzini,
B. Berenji,
A. Berretta,
E. Bissaldi,
R. D. Blandford,
R. Bonino,
P. Bruel,
S. Buson,
R. A. Cameron,
R. Caputo,
P. A. Caraveo,
D. Castro,
G. Chiaro,
N. Cibrario,
S. Ciprini,
J. Coronado-Blázquez,
M. Crnogorcevic
, et al. (95 additional authors not shown)
Abstract:
Cosmic rays are mostly composed of protons accelerated to relativistic speeds. When those protons encounter interstellar material, they produce neutral pions which in turn decay into gamma rays. This offers a compelling way to identify the acceleration sites of protons. A characteristic hadronic spectrum, with a low-energy break around 200 MeV, was detected in the gamma-ray spectra of four Superno…
▽ More
Cosmic rays are mostly composed of protons accelerated to relativistic speeds. When those protons encounter interstellar material, they produce neutral pions which in turn decay into gamma rays. This offers a compelling way to identify the acceleration sites of protons. A characteristic hadronic spectrum, with a low-energy break around 200 MeV, was detected in the gamma-ray spectra of four Supernova Remnants (SNRs), IC 443, W44, W49B and W51C, with the Fermi Large Area Telescope. This detection provided direct evidence that cosmic-ray protons are (re-)accelerated in SNRs. Here, we present a comprehensive search for low-energy spectral breaks among 311 4FGL catalog sources located within 5 degrees from the Galactic plane. Using 8 years of data from the Fermi Large Area Telescope between 50 MeV and 1 GeV, we find and present the spectral characteristics of 56 sources with a spectral break confirmed by a thorough study of systematic uncertainty. Our population of sources includes 13 SNRs for which the proton-proton interaction is enhanced by the dense target material; the high-mass gamma-ray binary LS~I +61 303; the colliding wind binary eta Carinae; and the Cygnus star-forming region. This analysis better constrains the origin of the gamma-ray emission and enlarges our view to potential new cosmic-ray acceleration sites.
△ Less
Submitted 6 May, 2022;
originally announced May 2022.
-
A Gamma-ray Pulsar Timing Array Constrains the Nanohertz Gravitational Wave Background
Authors:
M. Ajello,
W. B. Atwood,
L. Baldini,
J. Ballet,
G. Barbiellini,
D. Bastieri,
R. Bellazzini,
A. Berretta,
B. Bhattacharyya,
E. Bissaldi,
R. D. Blandford,
E. Bloom,
R. Bonino,
P. Bruel,
R. Buehler,
E. Burns,
S. Buson,
R. A. Cameron,
P. A. Caraveo,
E. Cavazzuti,
N. Cibrario,
S. Ciprini,
C. J. Clark,
I. Cognard,
J. Coronado-Blázquez
, et al. (107 additional authors not shown)
Abstract:
After large galaxies merge, their central supermassive black holes are expected to form binary systems whose orbital motion generates a gravitational wave background (GWB) at nanohertz frequencies. Searches for this background utilize pulsar timing arrays, which perform long-term monitoring of millisecond pulsars (MSPs) at radio wavelengths. We use 12.5 years of Fermi Large Area Telescope data to…
▽ More
After large galaxies merge, their central supermassive black holes are expected to form binary systems whose orbital motion generates a gravitational wave background (GWB) at nanohertz frequencies. Searches for this background utilize pulsar timing arrays, which perform long-term monitoring of millisecond pulsars (MSPs) at radio wavelengths. We use 12.5 years of Fermi Large Area Telescope data to form a gamma-ray pulsar timing array. Results from 35 bright gamma-ray pulsars place a 95\% credible limit on the GWB characteristic strain of $1.0\times10^{-14}$ at 1 yr$^{-1}$, which scales as the observing time span $t_{\mathrm{obs}}^{-13/6}$. This direct measurement provides an independent probe of the GWB while offering a check on radio noise models.
△ Less
Submitted 11 April, 2022;
originally announced April 2022.
-
Incremental Fermi Large Area Telescope Fourth Source Catalog
Authors:
Fermi-LAT collaboration,
:,
Soheila Abdollahi,
Fabio Acero,
Luca Baldini,
Jean Ballet,
Denis Bastieri,
Ronaldo Bellazzini,
Bijan Berenji,
Alessandra Berretta,
Elisabetta Bissaldi,
Roger D. Blandford,
Elliott Bloom,
Raffaella Bonino,
Ari Brill,
Richard J. Britto,
Philippe Bruel,
Toby H. Burnett,
Sara Buson,
Rob A. Cameron,
Regina Caputo,
Patrizia A. Caraveo,
Daniel Castro,
Sylvain Chaty,
Teddy C. Cheung
, et al. (116 additional authors not shown)
Abstract:
We present an incremental version (4FGL-DR3, for Data Release 3) of the fourth Fermi-LAT catalog of gamma-ray sources. Based on the first twelve years of science data in the energy range from 50 MeV to 1 TeV, it contains 6658 sources. The analysis improves on that used for the 4FGL catalog over eight years of data: more sources are fit with curved spectra, we introduce a more robust spectral param…
▽ More
We present an incremental version (4FGL-DR3, for Data Release 3) of the fourth Fermi-LAT catalog of gamma-ray sources. Based on the first twelve years of science data in the energy range from 50 MeV to 1 TeV, it contains 6658 sources. The analysis improves on that used for the 4FGL catalog over eight years of data: more sources are fit with curved spectra, we introduce a more robust spectral parameterization for pulsars, and we extend the spectral points to 1 TeV. The spectral parameters, spectral energy distributions, and associations are updated for all sources. Light curves are rebuilt for all sources with 1 yr intervals (not 2 month intervals). Among the 5064 original 4FGL sources, 16 were deleted, 112 are formally below the detection threshold over 12 yr (but are kept in the list), while 74 are newly associated, 10 have an improved association, and seven associations were withdrawn. Pulsars are split explicitly between young and millisecond pulsars. Pulsars and binaries newly detected in LAT sources, as well as more than 100 newly classified blazars, are reported. We add three extended sources and 1607 new point sources, mostly just above the detection threshold, among which eight are considered identified, and 699 have a plausible counterpart at other wavelengths. We discuss degree-scale residuals to the global sky model and clusters of soft unassociated point sources close to the Galactic plane, which are possibly related to limitations of the interstellar emission model and missing extended sources.
△ Less
Submitted 10 May, 2022; v1 submitted 26 January, 2022;
originally announced January 2022.
-
Optimal Inverse Design Based on Memetic Algorithms -- Part 2: Examples and Properties
Authors:
Miloslav Capek,
Lukas Jelinek,
Petr Kadlec,
Mats Gustafsson
Abstract:
Optimal inverse design, including topology optimization and evaluation of fundamental bounds on performance, which was introduced in Part~1, is applied to various antenna design problems. A memetic scheme for topology optimization combines local and global techniques to accelerate convergence and maintain robustness. Method-of-moments matrices are used to evaluate objective functions and allow to…
▽ More
Optimal inverse design, including topology optimization and evaluation of fundamental bounds on performance, which was introduced in Part~1, is applied to various antenna design problems. A memetic scheme for topology optimization combines local and global techniques to accelerate convergence and maintain robustness. Method-of-moments matrices are used to evaluate objective functions and allow to determine fundamental bounds on performance. By applying the Shermann-Morrison-Woodbury identity, the repetitively performed structural update is inversion-free yet full-wave. The technique can easily be combined with additional features often required in practice, \eg{}, only a part of the structure is controllable, or evaluation of an objective function is required in a subdomain only. The memetic framework supports multi-frequency and multi-port optimization and offers many other advantages, such as an actual shape being known at every moment of the optimization. The performance of the method is assessed, including its convergence and computational cost.
△ Less
Submitted 21 August, 2023; v1 submitted 26 October, 2021;
originally announced October 2021.
-
Polyatomic radiative association by quasiclassical trajectory calculations: Cross section for the formation of HCN molecules in H + CN collisions
Authors:
Péter Szabó,
Magnus Gustafsson
Abstract:
We have developed the polyatomic extension of a recently established (M. Gustafsson, J. Chem. Phys, 138, 074308 (2013)) classical theory of radiative association in the absence of electronic transitions. The cross section of the process is calculated by a quasiclassical trajectory method combined with the classical Larmor formula which can provide the radiated power in collisions. We have also pro…
▽ More
We have developed the polyatomic extension of a recently established (M. Gustafsson, J. Chem. Phys, 138, 074308 (2013)) classical theory of radiative association in the absence of electronic transitions. The cross section of the process is calculated by a quasiclassical trajectory method combined with the classical Larmor formula which can provide the radiated power in collisions. We have also proposed a double-layered Monte Carlo scheme for efficient computation of ro-vibrationally quantum state resolved cross sections for radiative association. Besides the method development, we also calculated and fitted the global potential energy and dipole surface for the H + CN collisions to test our polyatomic semiclassical method.
△ Less
Submitted 21 October, 2021;
originally announced October 2021.
-
Optimal Inverse Design Based on Memetic Algorithms -- Part 1: Theory and Implementation
Authors:
Miloslav Capek,
Lukas Jelinek,
Petr Kadlec,
Mats Gustafsson
Abstract:
A memetic framework for optimal inverse design is proposed by combining a local gradient-based procedure and a robust global scheme. The procedure is based on method-of-moments matrices and does not demand full inversion of a system matrix. Fundamental bounds are evaluated for all optimized metrics in the same manner, providing natural stopping criteria and quality measures for realized devices. C…
▽ More
A memetic framework for optimal inverse design is proposed by combining a local gradient-based procedure and a robust global scheme. The procedure is based on method-of-moments matrices and does not demand full inversion of a system matrix. Fundamental bounds are evaluated for all optimized metrics in the same manner, providing natural stopping criteria and quality measures for realized devices. Compared to density-based topology optimization, the proposed routine does not require filtering or thresholding. Compared to commonly used heuristics, the technique is significantly faster, still preserving a high level of versatility and robustness. This is a two-part paper in which the first part is devoted to the theoretical background and properties, and the second part applies the method to examples of varying complexity.
△ Less
Submitted 21 August, 2023; v1 submitted 11 October, 2021;
originally announced October 2021.
-
Unified Theory of Characteristic Modes: Part II -- Tracking, Losses, and FEM Evaluation
Authors:
Mats Gustafsson,
Lukas Jelinek,
Kurt Schab,
Miloslav Capek
Abstract:
This is the second component of a two-part paper dealing with a unification of characteristic mode decomposition. This second part addresses modal tracking and losses and presents several numerical examples for both surface- and volume-based method-of-moment formulations. A new tracking algorithm based on algebraic properties of the transition matrix is developed, achieving excellent precision and…
▽ More
This is the second component of a two-part paper dealing with a unification of characteristic mode decomposition. This second part addresses modal tracking and losses and presents several numerical examples for both surface- and volume-based method-of-moment formulations. A new tracking algorithm based on algebraic properties of the transition matrix is developed, achieving excellent precision and requiring a very low number of frequency samples as compared to procedures previously reported in the literature. The transition matrix is further utilized to show that characteristic mode decomposition of lossy objects fails to deliver orthogonal far fields and to demonstrate how characteristic modes can be evaluated using the finite element method.
△ Less
Submitted 5 October, 2021;
originally announced October 2021.
-
Searching for Axion-Like Particles from Core-Collapse Supernovae with Fermi LAT's Low Energy Technique
Authors:
Milena Crnogorčević,
Regina Caputo,
Manuel Meyer,
Nicola Omodei,
Michael Gustafsson
Abstract:
Light axion-like particles (ALPs) are expected to be abundantly produced in core-collapse supernovae (CCSNe), resulting in a $\sim$10-second long burst of ALPs. These particles subsequently undergo conversion into gamma-rays in external magnetic fields to produce a long gamma-ray burst (GRB) with a characteristic spectrum peaking in the 30--100-MeV energy range. At the same time, CCSNe are invoked…
▽ More
Light axion-like particles (ALPs) are expected to be abundantly produced in core-collapse supernovae (CCSNe), resulting in a $\sim$10-second long burst of ALPs. These particles subsequently undergo conversion into gamma-rays in external magnetic fields to produce a long gamma-ray burst (GRB) with a characteristic spectrum peaking in the 30--100-MeV energy range. At the same time, CCSNe are invoked as progenitors of {\it ordinary} long GRBs, rendering it relevant to conduct a comprehensive search for ALP spectral signatures using the observations of long GRB with the \textit{Fermi} Large Area Telescope (LAT). We perform a data-driven sensitivity analysis to determine CCSN distances for which a detection of an ALP signal is possible with the LAT's low-energy (LLE) technique which, in contrast to the standard LAT analysis, allows for a a larger effective area for energies down to 30~MeV. Assuming an ALP mass $m_a \lesssim 10^{-10}$~eV and ALP-photon coupling $g_{aγ} = 5.3\times 10^{-12}$ GeV$^{-1}$, values considered and deduced in ALP searches from SN1987A, we find that the distance limit ranges from $\sim\!0.5$ to $\sim\!10$~Mpc, depending on the sky location and the CCSN progenitor mass. Furthermore, we select a candidate sample of twenty-four GRBs and carry out a model comparison analysis in which we consider different GRB spectral models with and without an ALP signal component. We find that the inclusion of an ALP contribution does not result in any statistically significant improvement of the fits to the data. We discuss the statistical method used in our analysis and the underlying physical assumptions, the feasibility of setting upper limits on the ALP-photon coupling, and give an outlook on future telescopes in the context of ALP searches.
△ Less
Submitted 13 September, 2021;
originally announced September 2021.
-
A low-power integrated magneto-optic modulator on silicon for cryogenic applications
Authors:
Paolo Pintus,
Leonardo Ranzani,
Sergio Pinna,
Duanni Huang,
Martin V. Gustafsson,
Fotini Karinou,
Giovanni Andrea Casula,
Yuya Shoji,
Yota Takamura,
Tetsuya Mizumoto,
Mohammad Soltani,
John E. Bowers
Abstract:
A fundamental challenge of the quantum revolution is to efficiently interface the quantum computing systems operating at cryogenic temperatures with room temperature electronics and media for high data-rate communication. Current approaches to control and readout of such cryogenic computing systems use electrical cables, which prevent scalability due to their large size, heat conduction, and limit…
▽ More
A fundamental challenge of the quantum revolution is to efficiently interface the quantum computing systems operating at cryogenic temperatures with room temperature electronics and media for high data-rate communication. Current approaches to control and readout of such cryogenic computing systems use electrical cables, which prevent scalability due to their large size, heat conduction, and limited bandwidth1. A more viable approach is to use optical fibers which allow high-capacity transmission and thermal isolation. A key component in implementing photonic datalinks is a cryogenic optical modulator for converting data from the electrical to the optical domain at high speed and with low power consumption, while operating at temperatures of 4 K or lower. Cryogenic modulators based on the electro-optic effect have been demonstrated in a variety of material platforms, however they are voltage driven components while superconducting circuits are current based, resulting in a large impedance mismatch. Here, we present the first demonstration of an integrated current-driven modulator based on the magneto-optic effect operating over a wide temperature range that extends down to less than 4 K. The modulator works at data rates up to 2 Gbps with energy consumption below 4 pJ/bit, and we show that this figure can be reduced to less than 40 fJ/bit with optimized design and fabrication. This modulator is a hybrid device, where a current-driven magneto-optically active crystal (cerium substituted yttrium iron garnet, or Ce:YIG) is bonded to a high-quality silicon microring resonator. Because of its potential for extremely low power consumption under cryogenic conditions, the class of magneto-optical modulators demonstrated here has the potential to enable efficient data links in large-scale systems for quantum information processing.
△ Less
Submitted 9 September, 2021;
originally announced September 2021.
-
Miniaturizing transmon qubits using van der Waals materials
Authors:
Abhinandan Antony,
Martin V. Gustafsson,
Guilhem J. Ribeill,
Matthew Ware,
Anjaly Rajendran,
Luke C. G. Govia,
Thomas A. Ohki,
Takashi Taniguchi,
Kenji Watanabe,
James Hone,
Kin Chung Fong
Abstract:
Quantum computers can potentially achieve an exponential speedup versus classical computers on certain computational tasks, as recently demonstrated in systems of superconducting qubits. However, these qubits have large footprints due to their large capacitor electrodes needed to suppress losses by avoiding dielectric materials. This tactic hinders scaling by increasing parasitic coupling among ci…
▽ More
Quantum computers can potentially achieve an exponential speedup versus classical computers on certain computational tasks, as recently demonstrated in systems of superconducting qubits. However, these qubits have large footprints due to their large capacitor electrodes needed to suppress losses by avoiding dielectric materials. This tactic hinders scaling by increasing parasitic coupling among circuit components, degrading individual qubit addressability, and limiting the spatial density of qubits. Here, we take advantage of the unique properties of the van der Waals (vdW) materials to reduce the qubit area by a factor of $>1000$ while preserving the required capacitance without increasing substantial loss. Our qubits combine conventional aluminum-based Josephson junctions with parallel-plate capacitors composed of crystalline layers of superconducting niobium diselenide (NbSe$_2$) and insulating hexagonal-boron nitride (hBN). We measure a vdW transmon $T_1$ relaxation time of 1.06 $μ$s, which demonstrates a path to achieve high-qubit-density quantum processors with long coherence times, and illustrates the broad utility of layered heterostructures in low-loss, high-coherence quantum devices.
△ Less
Submitted 13 May, 2022; v1 submitted 6 September, 2021;
originally announced September 2021.
-
Unified Theory of Characteristic Modes: Part I -- Fundamentals
Authors:
Mats Gustafsson,
Lukas Jelinek,
Kurt Schab,
Miloslav Capek
Abstract:
A unification of characteristic mode decomposition for all method-of-moment formulations of field integral equations describing free-space scattering is derived. The work is based on an algebraic link between impedance and transition matrices, the latter of which was used in early definitions of characteristic modes and is uniquely defined for all scattering scenarios. This also makes it possible…
▽ More
A unification of characteristic mode decomposition for all method-of-moment formulations of field integral equations describing free-space scattering is derived. The work is based on an algebraic link between impedance and transition matrices, the latter of which was used in early definitions of characteristic modes and is uniquely defined for all scattering scenarios. This also makes it possible to extend the known application domain of characteristic mode decomposition to any other frequency-domain solver capable of generating transition matrices, such as finite difference or finite element methods. The formulation of characteristic modes using a transition matrix allows for the decomposition of induced currents and scattered fields from arbitrarily shaped objects, providing high numerical dynamics and increased stability, removing the issue of spurious modes, and offering good control of convergence. This first part of a two-part paper introduces the entire theory, extensively discusses its properties and offers its basic numerical validation.
△ Less
Submitted 30 September, 2021; v1 submitted 31 August, 2021;
originally announced September 2021.
-
Making high-quality quantum microwave devices with van der Waals superconductors
Authors:
Abhinandan Antony,
Martin V. Gustafsson,
Anjaly Rajendran,
Avishai Benyamini,
Guilhem Ribeill,
Thomas A. Ohki,
James Hone,
Kin Chung Fong
Abstract:
Ultra low-loss microwave materials are crucial for enhancing quantum coherence and scalability of superconducting qubits. Van der Waals (vdW) heterostructure is an attractive platform for quantum devices due to the single-crystal structure of the constituent two-dimensional (2D) layered materials and the lack of dangling bonds at their atomically sharp interfaces. However, new fabrication and char…
▽ More
Ultra low-loss microwave materials are crucial for enhancing quantum coherence and scalability of superconducting qubits. Van der Waals (vdW) heterostructure is an attractive platform for quantum devices due to the single-crystal structure of the constituent two-dimensional (2D) layered materials and the lack of dangling bonds at their atomically sharp interfaces. However, new fabrication and characterization techniques are required to determine whether these structures can achieve low loss in the microwave regime. Here we report the fabrication of superconducting microwave resonators using NbSe$_2$ that achieve a quality factor $Q > 10^5$. This value sets an upper bound that corresponds to a resistance of $\leq 192 μΩ$ when considering the additional loss introduced by integrating NbSe$_2$ into a standard transmon circuit. This work demonstrates the compatibility of 2D layered materials with high-quality microwave quantum devices.
△ Less
Submitted 27 November, 2021; v1 submitted 19 July, 2021;
originally announced July 2021.
-
Fermi Large Area Telescope Performance After 10 Years Of Operation
Authors:
The Fermi LAT Collaboration,
M. Ajello,
W. B. Atwood,
M. Axelsson,
R. Bagagli,
M. Bagni,
L. Baldini,
D. Bastieri,
F. Bellardi,
R. Bellazzini,
E. Bissaldi,
E. D. Bloom,
R. Bonino,
J. Bregeon,
A. Brez,
P. Bruel,
R. Buehler,
S. Buson,
R. A. Cameron,
P. A. Caraveo,
E. Cavazzuti,
M. Ceccanti,
S. Chen,
C. C. Cheung,
S. Ciprini
, et al. (104 additional authors not shown)
Abstract:
The Large Area Telescope (LAT), the primary instrument for the Fermi Gamma-ray Space Telescope (Fermi) mission, is an imaging, wide field-of-view, high-energy gamma-ray telescope, covering the energy range from 30 MeV to more than 300 GeV. We describe the performance of the instrument at the 10-year milestone. LAT performance remains well within the specifications defined during the planning phase…
▽ More
The Large Area Telescope (LAT), the primary instrument for the Fermi Gamma-ray Space Telescope (Fermi) mission, is an imaging, wide field-of-view, high-energy gamma-ray telescope, covering the energy range from 30 MeV to more than 300 GeV. We describe the performance of the instrument at the 10-year milestone. LAT performance remains well within the specifications defined during the planning phase, validating the design choices and supporting the compelling case to extend the duration of the Fermi mission. The details provided here will be useful when designing the next generation of high-energy gamma-ray observatories.
△ Less
Submitted 6 September, 2021; v1 submitted 23 June, 2021;
originally announced June 2021.
-
Catalog of Long-Term Transient Sources in the First 10 Years of Fermi-LAT Data
Authors:
L. Baldini,
J. Ballet,
D. Bastieri,
J. Becerra Gonzalez,
R. Bellazzini,
A. Berretta,
E. Bissaldi,
R. D. Blandford,
E. D. Bloom,
R. Bonino,
E. Bottacini,
P. Bruel,
S. Buson,
R. A. Cameron,
P. A. Caraveo,
E. Cavazzuti,
S. Chen,
G. Chiaro,
D. Ciangottini,
S. Ciprini,
P. Cristarella Orestano,
M. Crnogorcevic,
S. Cutini,
F. D'Ammando,
P. de la Torre Luque
, et al. (90 additional authors not shown)
Abstract:
We present the first Fermi Large Area Telescope (LAT) catalog of long-term $γ$-ray transient sources (1FLT). This comprises sources that were detected on monthly time intervals during the first decade of Fermi-LAT operations. The monthly time scale allows us to identify transient and variable sources that were not yet reported in other Fermi-LAT catalogs. The monthly datasets were analyzed using a…
▽ More
We present the first Fermi Large Area Telescope (LAT) catalog of long-term $γ$-ray transient sources (1FLT). This comprises sources that were detected on monthly time intervals during the first decade of Fermi-LAT operations. The monthly time scale allows us to identify transient and variable sources that were not yet reported in other Fermi-LAT catalogs. The monthly datasets were analyzed using a wavelet-based source detection algorithm that provided the candidate new transient sources. The search was limited to the extragalactic regions of the sky to avoid the dominance of the Galactic diffuse emission at low Galactic latitudes. The transient candidates were then analyzed using the standard Fermi-LAT Maximum Likelihood analysis method. All sources detected with a statistical significance above 4$σ$ in at least one monthly bin were listed in the final catalog. The 1FLT catalog contains 142 transient $γ$-ray sources that are not included in the 4FGL-DR2 catalog. Many of these sources (102) have been confidently associated with Active Galactic Nuclei (AGN): 24 are associated with Flat Spectrum Radio Quasars; 1 with a BL Lac object; 70 with Blazars of Uncertain Type; 3 with Radio Galaxies; 1 with a Compact Steep Spectrum radio source; 1 with a Steep Spectrum Radio Quasar; 2 with AGN of other types. The remaining 40 sources have no candidate counterparts at other wavelengths. The median $γ$-ray spectral index of the 1FLT-AGN sources is softer than that reported in the latest Fermi-LAT AGN general catalog. This result is consistent with the hypothesis that detection of the softest $γ$-ray emitters is less efficient when the data are integrated over year-long intervals.
△ Less
Submitted 31 May, 2021;
originally announced June 2021.
-
Fundamental Bounds on the Performance of Monochromatic Passive Cloaks
Authors:
Lukas Jelinek,
Mats Gustafsson,
Miloslav Capek,
Kurt Schab
Abstract:
Fundamental bounds on the performance of monochromatic scattering-cancellation and field-zeroing cloaks made of prescribed linear passive materials occupying a predefined design region are formulated by projecting field quantities onto a sub-sectional basis and applying quadratically constrained quadratic programming. Formulations are numerically tested revealing key physical trends as well as adv…
▽ More
Fundamental bounds on the performance of monochromatic scattering-cancellation and field-zeroing cloaks made of prescribed linear passive materials occupying a predefined design region are formulated by projecting field quantities onto a sub-sectional basis and applying quadratically constrained quadratic programming. Formulations are numerically tested revealing key physical trends as well as advantages and disadvantages between the two classes of cloaks. Results show that the use of low-loss materials with high dielectric contrast affords the highest potential for effective cloaking.
△ Less
Submitted 23 June, 2021; v1 submitted 31 March, 2021;
originally announced March 2021.
-
DRAKE: Dark matter Relic Abundance beyond Kinetic Equilibrium
Authors:
Tobias Binder,
Torsten Bringmann,
Michael Gustafsson,
Andrzej Hryczuk
Abstract:
We introduce DRAKE, a numerical precision tool for predicting the dark matter relic abundance also in situations where the standard assumption of kinetic equilibrium during the freeze-out process may not be satisfied. DRAKE comes with a set of three dedicated Boltzmann equation solvers that implement, respectively, the traditionally adopted equation for the dark matter number density, fluid-like e…
▽ More
We introduce DRAKE, a numerical precision tool for predicting the dark matter relic abundance also in situations where the standard assumption of kinetic equilibrium during the freeze-out process may not be satisfied. DRAKE comes with a set of three dedicated Boltzmann equation solvers that implement, respectively, the traditionally adopted equation for the dark matter number density, fluid-like equations that couple the evolution of number density and velocity dispersion, and a full numerical evolution of the phase-space distribution. We review the general motivation for these approaches and, for illustration, highlight three concrete classes of models where kinetic and chemical decoupling are intertwined in a way that quantitatively impacts the relic density: i) dark matter annihilation via a narrow resonance, ii) Sommerfeld-enhanced annihilation and iii) `forbidden' annihilation to final states that are kinematically inaccessible at threshold. We discuss all these cases in some detail, demonstrating that the commonly adopted, traditional treatment can result in an estimate of the relic density that is wrong by up to an order of magnitude. The public release of DRAKE, along with several examples of how to calculate the relic density in concrete models, is provided at drake.hepforge.org
△ Less
Submitted 4 August, 2021; v1 submitted 2 March, 2021;
originally announced March 2021.
-
Method of Moments and T-matrix Hybrid
Authors:
Vit Losenicky,
Lukas Jelinek,
Miloslav Capek,
Mats Gustafsson
Abstract:
Hybrid computational schemes combining the advantages of a method of moments formulation of a field integral equation and T-matrix method are developed in this paper. The hybrid methods are particularly efficient when describing the interaction of electrically small complex objects and electrically large objects of canonical shapes such as spherical multi-layered bodies where the T-matrix method i…
▽ More
Hybrid computational schemes combining the advantages of a method of moments formulation of a field integral equation and T-matrix method are developed in this paper. The hybrid methods are particularly efficient when describing the interaction of electrically small complex objects and electrically large objects of canonical shapes such as spherical multi-layered bodies where the T-matrix method is reduced to the Mie series making the method an interesting alternative in the design of implantable antennas or exposure evaluations. Method performance is tested on a spherical multi-layer model of the human head. Along with the hybrid method, an evaluation of the transition matrix of an arbitrarily shaped object is presented and the characteristic mode decomposition is performed, exhibiting fourfold numerical precision as compared to conventional approaches.
△ Less
Submitted 1 December, 2021; v1 submitted 8 December, 2020;
originally announced December 2020.
-
Trade-offs in absorption and scattering by nanophotonic structures
Authors:
Kurt Schab,
Austin Rothschild,
Kristi Nguyen,
Miloslav Capek,
Lukas Jelinek,
Mats Gustafsson
Abstract:
Trade-offs between feasible absorption and scattering cross sections of obstacles confined to an arbitrarily shaped volume are formulated as a multi-objective optimization problem solvable by Lagrangian-dual methods. Solutions to this optimization problem yield a Pareto-optimal set, the shape of which reveals the feasibility of achieving simultaneously extremal absorption and scattering. Two forms…
▽ More
Trade-offs between feasible absorption and scattering cross sections of obstacles confined to an arbitrarily shaped volume are formulated as a multi-objective optimization problem solvable by Lagrangian-dual methods. Solutions to this optimization problem yield a Pareto-optimal set, the shape of which reveals the feasibility of achieving simultaneously extremal absorption and scattering. Two forms of the trade-off problems are considered involving both loss and reactive material parameters. Numerical comparisons between the derived multi-objective bounds and several classes of realized structures are made. Additionally, low-frequency (electrically small, long wavelength) limits are examined for certain special cases.
△ Less
Submitted 17 September, 2020;
originally announced September 2020.
-
Lepton number violating operators with standard model gauge fields: A survey of neutrino masses from 3-loops and their link to dark matter
Authors:
Michael Gustafsson,
Jose Miguel No,
Maximiliano A. Rivera
Abstract:
We investigate neutrino mass generation scenarios where the lepton number breaking new physics couples only to the Standard Model (SM) right-handed charged lepton chirality. The lowest-order lepton number violating effective operator which describes this framework is a unique dimension nine operator involving SM gauge fields, $\mathcal{O}_9$. We find that there are two possible classes of new phys…
▽ More
We investigate neutrino mass generation scenarios where the lepton number breaking new physics couples only to the Standard Model (SM) right-handed charged lepton chirality. The lowest-order lepton number violating effective operator which describes this framework is a unique dimension nine operator involving SM gauge fields, $\mathcal{O}_9$. We find that there are two possible classes of new physics scenarios giving rise to this $\mathcal{O}_9$ operator. In these scenarios neutrino masses are induced radiatively via dark matter interactions, linking the dark matter to a natural explanation for the smallness of neutrino masses compared to the electroweak scale. We discuss the phenomenology and existing constraints in the different neutrino mass models within each class. In particular, we analyze the important interplay between neutrino mixing and neutrinoless double $β$-decay in order to predict characteristic signatures and disfavour certain scenarios.
△ Less
Submitted 24 June, 2020;
originally announced June 2020.
-
Search for dark matter signatures in the gamma-ray emission towards the Sun with the Fermi Large Area Telescope
Authors:
M. N. Mazziotta,
F. Loparco,
D. Serini,
A. Cuoco,
P. De La Torre Luque,
F. Gargano,
M. Gustafsson
Abstract:
Dark matter particles from the Galactic halo can be gravitationally trapped in the solar core or in external orbits. The enhanced density of dark matter particles either in the solar core or in external orbits can result in the annihilation of these particles producing gamma rays via long-lived intermediate states or directly outside the Sun, respectively. These processes would yield characteristi…
▽ More
Dark matter particles from the Galactic halo can be gravitationally trapped in the solar core or in external orbits. The enhanced density of dark matter particles either in the solar core or in external orbits can result in the annihilation of these particles producing gamma rays via long-lived intermediate states or directly outside the Sun, respectively. These processes would yield characteristic features in the energy spectrum of the subsequent gamma rays, i.e., a box-like or line-like shaped feature, respectively. We have performed a dedicated analysis using a 10-years sample of gamma-ray events from the Sun collected by the Fermi Large Area Telescope searching for spectral features in the energy spectrum as a signature of dark matter annihilation. In the scenario of gamma-ray production via long-lived mediators we have also evaluated the dark matter-nucleon spin-dependent and spin-independent scattering cross section constraints from the flux limits in a dark matter mass range from 3 GeV/c$^2$ up to about 1.8 TeV/c$^2$. In the mass range up to about 150 GeV/c$^2$ the limits are in the range $10^{-46} - 10^{-45}$ cm$^{2}$ for the spin-dependent scattering and in the range $10^{-48} - 10^{-47}$ cm$^{2}$ for the spin-independent case. The range of variation depends on the decay length of the mediator.
△ Less
Submitted 7 June, 2020;
originally announced June 2020.
-
On the optical theorem and optimal extinction, scattering and absorption in lossy media
Authors:
Sven Nordebo,
Mats Gustafsson,
Yevhen Ivanenko
Abstract:
This paper reformulates and extends some recent analytical results concerning a new optical theorem and the associated physical bounds on absorption in lossy media. The analysis is valid for any linear scatterer (such as an antenna), consisting of arbitrary materials (bianisotropic, etc.) and arbitrary geometries, as long as the scatterer is circumscribed by a spherical volume embedded in a lossy…
▽ More
This paper reformulates and extends some recent analytical results concerning a new optical theorem and the associated physical bounds on absorption in lossy media. The analysis is valid for any linear scatterer (such as an antenna), consisting of arbitrary materials (bianisotropic, etc.) and arbitrary geometries, as long as the scatterer is circumscribed by a spherical volume embedded in a lossy background medium. The corresponding formulas are here reformulated and extended to encompass magnetic as well as dielectric background media. Explicit derivations, formulas and discussions are also given for the corresponding bounds on scattering and extinction. A numerical example concerning the optimal microwave absorption and scattering in atmospheric oxygen in the 60 GHz communication band is included to illustrate the theory.
△ Less
Submitted 13 March, 2020;
originally announced March 2020.
-
A search for dark matter cosmic-ray electrons and positrons from the Sun with the Fermi Large Area Telescope
Authors:
A. Cuoco,
P. De La Torre Luque,
F. Gargano,
M. Gustafsson,
F. Loparco,
M. N. Mazziotta,
D. Serini
Abstract:
We use 7 years of electron and positron Fermi-LAT data to search for a possible excess in the direction of the Sun in the energy range from 42 GeV to 2 TeV. In the absence of a positive signal we derive flux upper limits which we use to constrain two different dark matter (DM) models producing $e^+ e^-$ fluxes from the Sun. In the first case we consider DM model being captured by the Sun due to el…
▽ More
We use 7 years of electron and positron Fermi-LAT data to search for a possible excess in the direction of the Sun in the energy range from 42 GeV to 2 TeV. In the absence of a positive signal we derive flux upper limits which we use to constrain two different dark matter (DM) models producing $e^+ e^-$ fluxes from the Sun. In the first case we consider DM model being captured by the Sun due to elastic scattering and annihilation into $e^+ e^-$ pairs via a long-lived light mediator that can escape the Sun. In the second case we consider instead a model where DM density is enhanced around the Sun through inelastic scattering and the DM annihilates directly into $e^+ e^-$ pairs. In both cases we perform an optimal analysis, searching specifically for the energy spectrum expected in each case, i.e., a box-like shaped and line-like shaped spectrum respectively. No significant signal is found and we can place limits on the spin-independent cross-section in the range from $10^{-46}~cm^2$ to $10^{-44}~cm^2$ and on the spin-dependent cross-section in the range from $10^{-43}~cm^2$ to $10^{-41}~cm^2$. In the case of inelastic scattering the limits on the cross-section are in the range from $10^{-43}~cm^2$ to $10^{-41}~cm^2$. The limits depend on the life time of the mediator (elastic case) and on the mass splitting value (inelastic case), as well as on the assumptions made for the size of the deflections of electrons and positrons in the interplanetary magnetic field.
△ Less
Submitted 19 December, 2019;
originally announced December 2019.
-
Upper bounds on absorption and scattering
Authors:
M. Gustafsson,
K. Schab,
L. Jelinek,
M. Capek
Abstract:
A general framework for determining fundamental bounds in nanophotonics is introduced in this paper. The theory is based on convex optimization of dual problems constructed from operators generated by electromagnetic integral equations. The optimized variable is a contrast current defined within a prescribed region of a given material constitutive relations. Two power conservation constraints anal…
▽ More
A general framework for determining fundamental bounds in nanophotonics is introduced in this paper. The theory is based on convex optimization of dual problems constructed from operators generated by electromagnetic integral equations. The optimized variable is a contrast current defined within a prescribed region of a given material constitutive relations. Two power conservation constraints analogous to optical theorem are utilized to tighten the bounds and to prescribe either losses or material properties. Thanks to the utilization of matrix rank-1 updates, modal decompositions, and model order reduction techniques, the optimization procedure is computationally efficient even for complicated scenarios. No dual gaps are observed. The method is well-suited to accommodate material anisotropy and inhomogeneity. To demonstrate the validity of the method, bounds on scattering, absorption, and extinction cross sections are derived first and evaluated for several canonical regions. The tightness of the bounds is verified by comparison to optimized spherical nanoparticles and shells. The next metric investigated is bi-directional scattering studied closely on a particular example of an electrically thin slab. Finally, the bounds are established for Purcell's factor and local field enhancement where a dimer is used as a practical example.
△ Less
Submitted 23 December, 2019; v1 submitted 13 December, 2019;
originally announced December 2019.
-
Development of Quantum InterConnects for Next-Generation Information Technologies
Authors:
David Awschalom,
Karl K. Berggren,
Hannes Bernien,
Sunil Bhave,
Lincoln D. Carr,
Paul Davids,
Sophia E. Economou,
Dirk Englund,
Andrei Faraon,
Marty Fejer,
Saikat Guha,
Martin V. Gustafsson,
Evelyn Hu,
Liang Jiang,
Jungsang Kim,
Boris Korzh,
Prem Kumar,
Paul G. Kwiat,
Marko Lončar,
Mikhail D. Lukin,
David A. B. Miller,
Christopher Monroe,
Sae Woo Nam,
Prineha Narang,
Jason S. Orcutt
, et al. (10 additional authors not shown)
Abstract:
Just as classical information technology rests on a foundation built of interconnected information-processing systems, quantum information technology (QIT) must do the same. A critical component of such systems is the interconnect, a device or process that allows transfer of information between disparate physical media, for example, semiconductor electronics, individual atoms, light pulses in opti…
▽ More
Just as classical information technology rests on a foundation built of interconnected information-processing systems, quantum information technology (QIT) must do the same. A critical component of such systems is the interconnect, a device or process that allows transfer of information between disparate physical media, for example, semiconductor electronics, individual atoms, light pulses in optical fiber, or microwave fields. While interconnects have been well engineered for decades in the realm of classical information technology, quantum interconnects (QuICs) present special challenges, as they must allow the transfer of fragile quantum states between different physical parts or degrees of freedom of the system. The diversity of QIT platforms (superconducting, atomic, solid-state color center, optical, etc.) that will form a quantum internet poses additional challenges. As quantum systems scale to larger size, the quantum interconnect bottleneck is imminent, and is emerging as a grand challenge for QIT. For these reasons, it is the position of the community represented by participants of the NSF workshop on Quantum Interconnects that accelerating QuIC research is crucial for sustained development of a national quantum science and technology program. Given the diversity of QIT platforms, materials used, applications, and infrastructure required, a convergent research program including partnership between academia, industry and national laboratories is required.
This document is a summary from a U.S. National Science Foundation supported workshop held on 31 October - 1 November 2019 in Alexandria, VA. Attendees were charged to identify the scientific and community needs, opportunities, and significant challenges for quantum interconnects over the next 2-5 years.
△ Less
Submitted 2 January, 2020; v1 submitted 13 December, 2019;
originally announced December 2019.
-
Odd- and even-denominator fractional quantum Hall states in monolayer WSe$_2$
Authors:
Qianhui Shi,
En-Min Shih,
Martin V. Gustafsson,
Daniel A. Rhodes,
Bumho Kim,
Kenji Watanabe,
Takashi Taniguchi,
Zlatko Papić,
James Hone,
Cory R. Dean
Abstract:
Monolayer (ML) semiconducting transition-metal dichalcogenides (TMDs) represent a unique class of two-dimensional (2D) electron systems. Their atomically thin structure -- just like graphene -- facilitates gate-tunability, while the sizable band gap and strong spin-orbit coupling hold promise for properties beyond graphene. Measurements under large magnetic fields have revealed an unusual LL struc…
▽ More
Monolayer (ML) semiconducting transition-metal dichalcogenides (TMDs) represent a unique class of two-dimensional (2D) electron systems. Their atomically thin structure -- just like graphene -- facilitates gate-tunability, while the sizable band gap and strong spin-orbit coupling hold promise for properties beyond graphene. Measurements under large magnetic fields have revealed an unusual LL structure, distinct from other 2D electron systems. However, owing to limited sample quality and poor electrical contact, probing the lowest Landau levels (LLs) has been challenging, and observation of electron correlations within the fractionally filled LLs regime has not been possible. Here, through bulk electronic compressibility measurements, we investigate the LL structure of ML WSe$_2$ in the extreme quantum limit, and observe fractional quantum Hall (FQH) states in the lowest three LLs. The odd-denominator FQH sequences demonstrate a systematic evolution with the LL orbital index, which has not been observed in any other system but is consistent with generic theoretical expectations. In addition, we observe an even-denominator state in the second LL that is expected to host non-Abelian statistics. Our results suggest that the 2D semiconductors can provide an experimental platform that closely resembles idealized theoretical models in the quantum Hall regime.
△ Less
Submitted 15 July, 2020; v1 submitted 11 November, 2019;
originally announced November 2019.
-
Optical theorems and physical bounds on absorption in lossy media
Authors:
Yevhen Ivanenko,
Mats Gustafsson,
Sven Nordebo
Abstract:
Two different versions of an optical theorem for a scattering body embedded inside a lossy background medium are derived in this paper. The corresponding fundamental upper bounds on absorption are then obtained in closed form by elementary optimization techniques. The first version is formulated in terms of polarization currents (or equivalent currents) inside the scatterer and generalizes previou…
▽ More
Two different versions of an optical theorem for a scattering body embedded inside a lossy background medium are derived in this paper. The corresponding fundamental upper bounds on absorption are then obtained in closed form by elementary optimization techniques. The first version is formulated in terms of polarization currents (or equivalent currents) inside the scatterer and generalizes previous results given for a lossless medium. The corresponding bound is referred to here as a variational bound and is valid for an arbitrary geometry with a given material property. The second version is formulated in terms of the T-matrix parameters of an arbitrary linear scatterer circumscribed by a spherical volume and gives a new fundamental upper bound on the total absorption of an inclusion with an arbitrary material property (including general bianisotropic materials). The two bounds are fundamentally different as they are based on different assumptions regarding the structure and the material property. Numerical examples including homogeneous and layered (core-shell) spheres are given to demonstrate that the two bounds provide complimentary information in a given scattering problem.
△ Less
Submitted 26 August, 2019;
originally announced August 2019.
-
Cryogenic Memory Architecture Integrating Spin Hall Effect based Magnetic Memory and Superconductive Cryotron Devices
Authors:
Minh-Hai Nguyen,
Guilhem J. Ribeill,
Martin Gustafsson,
Shengjie Shi,
Sriharsha V. Aradhya,
Andrew P. Wagner,
Leonardo M. Ranzani,
Lijun Zhu,
Reza Baghdadi3 Brenden Butters,
Emily Toomey,
Marco Colangelo,
Patrick A. Truitt,
Amir Jafari-Salim,
David McAllister,
Daniel Yohannes,
Sean R. Cheng,
Rich Lazarus,
Oleg Mukhanov,
Karl K. Berggren,
Robert A. Buhrman,
Graham E. Rowlands,
Thomas A. Ohki
Abstract:
One of the most challenging obstacles to realizing exascale computing is minimizing the energy consumption of L2 cache, main memory, and interconnects to that memory. For promising cryogenic computing schemes utilizing Josephson junction superconducting logic, this obstacle is exacerbated by the cryogenic system requirements that expose the technology's lack of high-density, high-speed and power-e…
▽ More
One of the most challenging obstacles to realizing exascale computing is minimizing the energy consumption of L2 cache, main memory, and interconnects to that memory. For promising cryogenic computing schemes utilizing Josephson junction superconducting logic, this obstacle is exacerbated by the cryogenic system requirements that expose the technology's lack of high-density, high-speed and power-efficient memory. Here we demonstrate an array of cryogenic memory cells consisting of a non-volatile three-terminal magnetic tunnel junction element driven by the spin Hall effect, combined with a superconducting heater-cryotron bit-select element. The write energy of these memory elements is roughly 8 pJ with a bit-select element, designed to achieve a minimum overhead power consumption of about 30%. Individual magnetic memory cells measured at 4 K show reliable switching with write error rates below $10^{-6}$, and a 4x4 array can be fully addressed with bit select error rates of $10^{-6}$. This demonstration is a first step towards a full cryogenic memory architecture targeting energy and performance specifications appropriate for applications in superconducting high performance and quantum computing control systems, which require significant memory resources operating at 4 K.
△ Less
Submitted 1 July, 2019;
originally announced July 2019.
-
Capacity Bounds and Degrees of Freedom for MIMO Antennas Constrained by Q-Factor
Authors:
Casimir Ehrenborg,
Mats Gustafsson,
Miloslav Capek
Abstract:
The optimal spectral efficiency and number of independent channels for MIMO antennas in isotropic multipath channels are investigated when bandwidth requirements are placed on the antenna. By posing the problem as a convex optimization problem restricted by the port Q-factor a semi-analytical expression is formed for its solution. The antennas are simulated by method of moments and the solution is…
▽ More
The optimal spectral efficiency and number of independent channels for MIMO antennas in isotropic multipath channels are investigated when bandwidth requirements are placed on the antenna. By posing the problem as a convex optimization problem restricted by the port Q-factor a semi-analytical expression is formed for its solution. The antennas are simulated by method of moments and the solution is formulated both for structures fed by discrete ports, as well as for design regions characterized by an equivalent current. It is shown that the solution is solely dependent on the eigenvalues of the so-called energy modes of the antenna. The magnitude of these eigenvalues is analyzed for a linear dipole array as well as a plate with embedded antenna regions. The energy modes are also compared to the characteristic modes to validate characteristic modes as a design strategy for MIMO antennas. The antenna performance is illustrated through spectral efficiency over the Q-factor, a quantity that is connected to the capacity. It is proposed that the number of energy modes below a given Q-factor can be used to estimate the degrees of freedom for that Q-factor.
△ Less
Submitted 6 September, 2021; v1 submitted 6 May, 2019;
originally announced May 2019.
-
Physical bounds and radiation modes for MIMO antennas
Authors:
Casimir Ehrenborg,
Mats Gustafsson
Abstract:
Modern antenna design for communication systems revolves around two extremes: devices, where only a small region is dedicated to antenna design, and base stations, where design space is not shared with other components. Both imply different restrictions on what performance is realizable. In this paper properties of both ends of the spectrum in terms of MIMO performance is investigated. For electri…
▽ More
Modern antenna design for communication systems revolves around two extremes: devices, where only a small region is dedicated to antenna design, and base stations, where design space is not shared with other components. Both imply different restrictions on what performance is realizable. In this paper properties of both ends of the spectrum in terms of MIMO performance is investigated. For electrically small antennas the size restriction dominates the performance parameters. The regions dedicated to antenna design induce currents on the rest of the device. Here a method for studying fundamental bound on spectral efficiency of such configurations is presented. This bound is also studied for $N$-degree MIMO systems. For electrically large structures the number of degrees of freedom available per unit area is investigated for different shapes. Both of these are achieved by formulating a convex optimization problem for maximum spectral efficiency in the current density on the antenna. A computationally efficient solution for this problem is formulated and investigated in relation to constraining parameters, such as size and efficiency.
△ Less
Submitted 17 October, 2019; v1 submitted 29 December, 2018;
originally announced March 2019.
-
Inversion-Free Evaluation of Nearest Neighbors in Method of Moments
Authors:
Miloslav Capek,
Lukas Jelinek,
Mats Gustafsson
Abstract:
A recently introduced technique of topology sensitivity in method of moments is extended by the possibility of adding degrees-of-freedom (reconstruct) into underlying structure. The algebraic formulation is inversion-free, suitable for parallelization and scales favorably with the number of unknowns. The reconstruction completes the nearest neighbors procedure for an evaluation of the smallest sha…
▽ More
A recently introduced technique of topology sensitivity in method of moments is extended by the possibility of adding degrees-of-freedom (reconstruct) into underlying structure. The algebraic formulation is inversion-free, suitable for parallelization and scales favorably with the number of unknowns. The reconstruction completes the nearest neighbors procedure for an evaluation of the smallest shape perturbation. The performance of the method is studied with a greedy search over a Hamming graph representing the structure in which initial positions are chosen from a random set. The method is shown to be effective data mining tool for machine learning-related applications.
△ Less
Submitted 18 April, 2019; v1 submitted 15 February, 2019;
originally announced February 2019.
-
Quasi-Herglotz functions and convex optimization
Authors:
Yevhen Ivanenko,
Mitja Nedic,
Mats Gustafsson,
B. L. G. Jonsson,
Annemarie Luger,
Sven Nordebo
Abstract:
We introduce the set of quasi-Herglotz functions and demonstrate that it has properties useful in the modeling of non-passive systems. The linear space of quasi-Herglotz functions constitutes a natural extension of the convex cone of Herglotz functions. It consists of differences of Herglotz functions, and we show that several of the important properties and modeling perspectives are inherited by…
▽ More
We introduce the set of quasi-Herglotz functions and demonstrate that it has properties useful in the modeling of non-passive systems. The linear space of quasi-Herglotz functions constitutes a natural extension of the convex cone of Herglotz functions. It consists of differences of Herglotz functions, and we show that several of the important properties and modeling perspectives are inherited by the new set of quasi-Herglotz functions. In particular, this applies to their integral representations, the associated integral identities or sum rules (with adequate additional assumptions), their boundary values on the real axis and the associated approximation theory. Numerical examples are included to demonstrate the modeling of a non-passive gain media formulated as a convex optimization problem, where the generating measure is modeled by using a finite expansion of B-splines and point masses.
△ Less
Submitted 27 August, 2019; v1 submitted 10 December, 2018;
originally announced December 2018.
-
Maximum Gain, Effective Area, and Directivity
Authors:
Mats Gustafsson,
Miloslav Capek
Abstract:
Fundamental bounds on antenna gain are found via convex optimization of the current density in a prescribed region. Various constraints are considered, including self-resonance and only partial control of the current distribution. Derived formulas are valid for arbitrarily shaped radiators of a given conductivity. All the optimization tasks are reduced to eigenvalue problems, which are solved effi…
▽ More
Fundamental bounds on antenna gain are found via convex optimization of the current density in a prescribed region. Various constraints are considered, including self-resonance and only partial control of the current distribution. Derived formulas are valid for arbitrarily shaped radiators of a given conductivity. All the optimization tasks are reduced to eigenvalue problems, which are solved efficiently. The second part of the paper deals with superdirectivity and its associated minimal costs in efficiency and Q-factor. The paper is accompanied with a series of examples practically demonstrating the relevance of the theoretical framework and entirely spanning wide range of material parameters and electrical sizes used in antenna technology. Presented results are analyzed from a perspective of effectively radiating modes. In contrast to a common approach utilizing spherical modes, the radiating modes of a given body are directly evaluated and analyzed here. All crucial mathematical steps are reviewed in the appendices, including a series of important subroutines to be considered making it possible to reduce the computational burden associated with the evaluation of electrically large structures and structures of high conductivity.
△ Less
Submitted 11 December, 2018;
originally announced December 2018.
-
Fundamental bounds on transmission through periodically perforated metal screens with experimental validation
Authors:
Andrei Ludvig-Osipov,
Johan Lundgren,
Casimir Ehrenborg,
Yevhen Ivanenko,
Andreas Ericsson,
Mats Gustafsson,
B. L. G. Jonsson,
Daniel Sjöberg
Abstract:
This paper presents a study of transmission through arrays of periodic sub-wavelength apertures. Fundamental limitations for this phenomenon are formulated as a sum rule, relating the transmission coefficient over a bandwidth to the static polarizability. The sum rule is rigorously derived for arbitrary periodic apertures in thin screens. By this sum rule we establish a physical bound on the trans…
▽ More
This paper presents a study of transmission through arrays of periodic sub-wavelength apertures. Fundamental limitations for this phenomenon are formulated as a sum rule, relating the transmission coefficient over a bandwidth to the static polarizability. The sum rule is rigorously derived for arbitrary periodic apertures in thin screens. By this sum rule we establish a physical bound on the transmission bandwidth which is verified numerically for a number of aperture array designs. We utilize the sum rule to design and optimize sub-wavelength frequency selective surfaces with a bandwidth close to the physically attainable. Finally, we verify the sum rule and simulations by measurements of an array of horseshoe-shaped slots milled in aluminum foil.
△ Less
Submitted 5 August, 2019; v1 submitted 17 October, 2018;
originally announced October 2018.
-
Optimal Planar Electric Dipole Antenna
Authors:
Miloslav Capek,
Lukas Jelinek,
Kurt Schab,
Mats Gustafsson,
B. L. G. Jonsson,
Fabien Ferrero,
Casimir Ehrenborg
Abstract:
Considerable time is often spent optimizing antennas to meet specific design metrics. Rarely, however, are the resulting antenna designs compared to rigorous physical bounds on those metrics. Here we study the performance of optimized planar meander line antennas with respect to such bounds. Results show that these simple structures meet the lower bound on radiation Q-factor (maximizing single res…
▽ More
Considerable time is often spent optimizing antennas to meet specific design metrics. Rarely, however, are the resulting antenna designs compared to rigorous physical bounds on those metrics. Here we study the performance of optimized planar meander line antennas with respect to such bounds. Results show that these simple structures meet the lower bound on radiation Q-factor (maximizing single resonance fractional bandwidth), but are far from reaching the associated physical bounds on efficiency. The relative performance of other canonical antenna designs is compared in similar ways, and the quantitative results are connected to intuitions from small antenna design, physical bounds, and matching network design.
△ Less
Submitted 21 April, 2019; v1 submitted 31 August, 2018;
originally announced August 2018.
-
Shape Synthesis Based on Topology Sensitivity
Authors:
Miloslav Capek,
Lukas Jelinek,
Mats Gustafsson
Abstract:
A method evaluating the sensitivity of a given parameter to topological changes is proposed within the method of moments paradigm. The basis functions are used as degrees of freedom which, when compared to the classical pixeling technique, provide important advantages, one of them being impedance matrix inversion free evaluation of the sensitivity. The devised procedure utilizes port modes and the…
▽ More
A method evaluating the sensitivity of a given parameter to topological changes is proposed within the method of moments paradigm. The basis functions are used as degrees of freedom which, when compared to the classical pixeling technique, provide important advantages, one of them being impedance matrix inversion free evaluation of the sensitivity. The devised procedure utilizes port modes and their superposition which, together with only a single evaluation of all matrix operators, leads to a computationally effective procedure. The proposed method is approximately one hundred times faster than contemporary approaches, which allows the investigation of the sensitivity and the modification of shapes in real-time. The method is compared with known approaches and its validity and effectiveness is verified using a series of examples. The procedure can be implemented in up-to-date EM simulators in a straightforward manner. It is shown that the iterative repetition of the topology sensitivity evaluation can be used for gradient-based topology synthesis. This technique can also be employed as a local step in global optimizers.
△ Less
Submitted 11 January, 2019; v1 submitted 7 August, 2018;
originally announced August 2018.
-
Dark Matter Relic Density Revisited: The Case For Early Kinetic Decoupling
Authors:
Tobias Binder,
Torsten Bringmann,
Michael Gustafsson,
Andrzej Hryczuk
Abstract:
Kinetic decoupling of dark matter typically happens much later than chemical freeze-out. In fact, local thermal equilibrium is an important assumption for the usual relic density calculations based on solving the Boltzmann equation (for its 0-th moment) describing the dark matter number density. But is this assumption always justified? Here we address this question and discuss the consequences of…
▽ More
Kinetic decoupling of dark matter typically happens much later than chemical freeze-out. In fact, local thermal equilibrium is an important assumption for the usual relic density calculations based on solving the Boltzmann equation (for its 0-th moment) describing the dark matter number density. But is this assumption always justified? Here we address this question and discuss the consequences of more accurate treatments. The first treatment is relying on the inclusion of higher moments of the Boltzmann equation and the second on solving the evolution of the phase-space distribution function fully numerically. For illustration, these methods are applied to the Scalar Singlet model, often referred to as the simplest WIMP DM possibility from a model-building perspective. It is explicitly shown that even in this simple model the prediction for the dark matter abundance can be affected by as much as one order of magnitude.
△ Less
Submitted 1 May, 2018;
originally announced May 2018.
-
Trade-off Between Antenna Efficiency and Q-Factor
Authors:
Mats Gustafsson,
Miloslav Capek,
Kurt Schab
Abstract:
The trade-off between radiation efficiency and antenna bandwidth, expressed in terms of Q-factor, for small antennas is formulated as a multi-objective optimization problem in current distributions of predefined support. Variants on the problem are constructed to demonstrate the consequences of requiring a self-resonant current as opposed to one tuned by an external reactance. The resulting Pareto…
▽ More
The trade-off between radiation efficiency and antenna bandwidth, expressed in terms of Q-factor, for small antennas is formulated as a multi-objective optimization problem in current distributions of predefined support. Variants on the problem are constructed to demonstrate the consequences of requiring a self-resonant current as opposed to one tuned by an external reactance. The resulting Pareto-optimal sets reveal the relative cost of valuing low radiation Q-factor over high efficiency, the cost in efficiency to require a self-resonant current, the effects of lossy parasitic loading, and other insights.
△ Less
Submitted 7 August, 2018; v1 submitted 10 November, 2017;
originally announced February 2018.