-
Theoretical studies of enhanced anomalous Nernst effect in Fe$_3$Ga
Authors:
Ondřej Stejskal,
Martin Veis,
Jaroslav Hamrle
Abstract:
The anomalous Nernst effect (ANE) is a member of the extensive family of topological effects in solid state physics. It converts a heat current into electric voltage and originates from the Berry curvature of electronic bands near the Fermi level. Recent results established the Fe$_3$Ga alloy as one of the most promising candidates for applications, due to its flat band structure consisting of ric…
▽ More
The anomalous Nernst effect (ANE) is a member of the extensive family of topological effects in solid state physics. It converts a heat current into electric voltage and originates from the Berry curvature of electronic bands near the Fermi level. Recent results established the Fe$_3$Ga alloy as one of the most promising candidates for applications, due to its flat band structure consisting of rich web of nodal lines. In this theoretical work, we study the effect of deformation of Fe$_3$Ga on the anomalous Nernst effect, which naturally occurs in thin films. Furthermore, we demonstrate that doping, which effectively shifts the position of the Fermi level, can also significantly modify the strength of the effect. Lastly, we provide detailed analysis of the origin of ANE in the electronic structure of Fe$_3$Ga which yields a deeper insight into the generating mechanisms, understanding of which can lead to substantial enhancement of the effect in the future.
△ Less
Submitted 22 March, 2023;
originally announced March 2023.
-
Cubic magneto-optic Kerr effect in Ni(111) thin films with and without twinning
Authors:
Maik Gaerner,
Robin Silber,
Tobias Peters,
Jaroslav Hamrle,
Timo Kuschel
Abstract:
In most studies utilizing the magneto-optic Kerr effect (MOKE), the detected change of polarized light upon reflection from a magnetized sample is supposed to be proportional to the magnetization $\boldsymbol{M}$. However, MOKE signatures quadratic in $\boldsymbol{M}$ have also been identified and utilized, e.g., to sense the structural order in Heusler compounds, to detect spin-orbit torques or t…
▽ More
In most studies utilizing the magneto-optic Kerr effect (MOKE), the detected change of polarized light upon reflection from a magnetized sample is supposed to be proportional to the magnetization $\boldsymbol{M}$. However, MOKE signatures quadratic in $\boldsymbol{M}$ have also been identified and utilized, e.g., to sense the structural order in Heusler compounds, to detect spin-orbit torques or to image antiferromagnetic domains. In our study, we observe a strong anisotropic MOKE contribution of third order in $\boldsymbol{M}$ in Ni(111) thin films, attributed to a cubic magneto-optic tensor $\propto $ $\boldsymbol{M}^3$. We further show that the angular dependence of cubic MOKE (CMOKE) is affected by the amount of structural domain twinning in the sample. Our detailed study on CMOKE for two selected photon energies will open up new opportunities for CMOKE applications with sensitivity to twinning properties of thin films, e.g. CMOKE spectroscopy and microscopy or time-resolved CMOKE.
△ Less
Submitted 19 March, 2024; v1 submitted 17 May, 2022;
originally announced May 2022.
-
Current distribution in metallic multilayers from resistance measurements
Authors:
Ondřej Stejskal,
André Thiaville,
Jaroslav Hamrle,
Shunsuke Fukami,
Hideo Ohno
Abstract:
The in-plane current profile within multilayers of generic structure Ta/Pt/(CoNi)/Pt/Ta is investigated. A large set of samples where the thickness of each layer is systematically varied was grown, followed by the measurement of the sheet resistance of each sample. The data are analyzed by a series of increasingly elaborate models, from a macroscopic engineering approach to mesoscopic transport th…
▽ More
The in-plane current profile within multilayers of generic structure Ta/Pt/(CoNi)/Pt/Ta is investigated. A large set of samples where the thickness of each layer is systematically varied was grown, followed by the measurement of the sheet resistance of each sample. The data are analyzed by a series of increasingly elaborate models, from a macroscopic engineering approach to mesoscopic transport theory. Non-negligible variations of the estimated repartition of current between the layers are found. The importance of having additional structural data is highlighted.
△ Less
Submitted 2 July, 2020;
originally announced July 2020.
-
Scaling of quadratic and linear magnetooptic Kerr effect spectra with L2$_1$ ordering of Co$_2$MnSi Heusler compound
Authors:
Robin Silber,
Daniel Král,
Ondřej Stejskal,
Takahide Kubota,
Yasuo Ando,
Jaromír Pištora,
Martin Veis,
Jaroslav Hamrle,
Timo Kuschel
Abstract:
The Heusler compound Co$_2$MnSi provides a crystallographic transition from B2 to L2$_1$ structure with increasing annealing temperature $T_a$, being a model system for investigating the influence of crystallographic ordering on structural, magnetic, optic, and magnetooptic (MO) properties. Here, we present quadratic magnetooptic Kerr effect (QMOKE) spectra depending on $M^2$ in addition to the li…
▽ More
The Heusler compound Co$_2$MnSi provides a crystallographic transition from B2 to L2$_1$ structure with increasing annealing temperature $T_a$, being a model system for investigating the influence of crystallographic ordering on structural, magnetic, optic, and magnetooptic (MO) properties. Here, we present quadratic magnetooptic Kerr effect (QMOKE) spectra depending on $M^2$ in addition to the linear magnetooptic Kerr effect (LinMOKE) spectra being proportional to $M$, both in the extended visible spectral range of light from 0.8\,eV to 5.5\,eV. We investigated a set of Co$_2$MnSi thin films deposited on MgO(001) substrates and annealed from 300$^\circ$C to 500$^\circ$C. The amplitude of LinMOKE and QMOKE spectra scales linearly with $T_a$, and this effect is well pronounced at the resonant peaks below 2.0\,eV of the QMOKE spectra. Furthermore, the spectra of the MO parameters, which fully describe the MO response of Co$_2$MnSi up to the second order in $M$, are obtained dependend on $T_a$. Finally, the spectra are compared to ab-initio calculations of a purely L2$_1$ ordered Co$_2$MnSi Heusler compound.
△ Less
Submitted 24 March, 2020; v1 submitted 21 March, 2020;
originally announced March 2020.
-
Quadratic magnetooptic Kerr effect spectroscopy of Fe epitaxial films on MgO(001) substrates
Authors:
Robin Silber,
Ondřej Stejskal,
Lukáš Beran,
Petr Cejpek,
Roman Antoš,
Tristan Matalla-Wagner,
Jannis Thien,
Olga Kuschel,
Joachim Wollschläger,
Martin Veis,
Timo Kuschel,
Jaroslav Hamrle
Abstract:
The magnetooptic Kerr effect (MOKE) is a well known and handy tool to characterize ferro-, ferri- and antiferromagnetic materials. Many of the MOKE techniques employ effects solely linear in magnetization $\bm{M}$. Nevertheless, a higher-order term being proportional to $\bm{M}^2$ and called quadratic MOKE (QMOKE) can additionally contribute to the experimental data. Here, we present detailed QMOK…
▽ More
The magnetooptic Kerr effect (MOKE) is a well known and handy tool to characterize ferro-, ferri- and antiferromagnetic materials. Many of the MOKE techniques employ effects solely linear in magnetization $\bm{M}$. Nevertheless, a higher-order term being proportional to $\bm{M}^2$ and called quadratic MOKE (QMOKE) can additionally contribute to the experimental data. Here, we present detailed QMOKE spectroscopy measurements in the range of 0.8 -- 5.5\,eV based on a modified 8-directional method applied on ferromagnetic bcc Fe thin films grown on MgO substrates. From the measured QMOKE spectra, two further complex spectra of the QMOKE parameters $G_s$ and $2G_{44}$ are yielded. The difference between those two parameters, known as $ΔG$, denotes the strength of the QMOKE anisotropy. Those QMOKE parameters give rise to the QMOKE tensor $\bm{G}$, fully describing the perturbation of the permittivity tensor in the second order in $\bm{M}$ for cubic crystal structures. We further present experimental measurements of ellipsometry and linear MOKE spectra, wherefrom permittivity in the zeroth and the first order in $\bm{M}$ are obtained, respectively. Finally, all those spectra are described by ab-initio calculations.
△ Less
Submitted 5 July, 2019; v1 submitted 30 April, 2019;
originally announced April 2019.
-
Investigation of the quality of an As35S65 grating by spectroscopic ellipsometry
Authors:
Roman Antos,
Jan Mistrik,
Karel Palka,
Stanislav Slang,
Josef Navratil,
Jaroslav Hamrle,
Martin Veis,
Miroslav Vlcek
Abstract:
The quality of an As35S65 chalcogenide glass (ChG) grating fabricated by electron beam lithography (EBL) was characterized by optical scatterometry based on spectroscopic ellipsometry (SE) in the visible and near infrared spectral range and complementary techniques providing direct images, especially atomic force microscopy (AFM). The geometric dimensions and the shape of patterned grating lines w…
▽ More
The quality of an As35S65 chalcogenide glass (ChG) grating fabricated by electron beam lithography (EBL) was characterized by optical scatterometry based on spectroscopic ellipsometry (SE) in the visible and near infrared spectral range and complementary techniques providing direct images, especially atomic force microscopy (AFM). The geometric dimensions and the shape of patterned grating lines were determined by fitting modeled values (calculated by the Fourier modal method) to SE experimental data. A simple power-dependent function with only one variable parameter was successfully used to describe the shape of the patterned lines. The result yielded by SE is shown to correspond to AFM measurement with high accuracy, provided that optical constants of ChG modified by EBL were used in the fitting procedure. The line edge roughness (LER) of the grating was also investigated by further fitting the SE data to find out that no LER is optically detectable in the spectral range used, which is essential for the functionality of optical tools fabricated by EBL.
△ Less
Submitted 20 December, 2018;
originally announced December 2018.
-
Quadratic magnetooptic spectroscopy setup based on photoelastic light modulation
Authors:
Robin Silber,
Michaela Tomíčková,
Jari Rodewald,
Joachim Wollschläger,
Martin Veis,
Timo Kuschel,
Jaroslav Hamrle
Abstract:
In most of the cases the magnetooptic Kerr effect (MOKE) techniques rely solely on the effects linear in magnetization ($\bm{M}$). Nevertheless, a higher-order term being proportional to $\bm{M}$$^2$ and called quadratic MOKE (QMOKE) can additionally contribute to experimental data. Handling and understanding the underlying origin of QMOKE could be the key to utilize this effect for investigation…
▽ More
In most of the cases the magnetooptic Kerr effect (MOKE) techniques rely solely on the effects linear in magnetization ($\bm{M}$). Nevertheless, a higher-order term being proportional to $\bm{M}$$^2$ and called quadratic MOKE (QMOKE) can additionally contribute to experimental data. Handling and understanding the underlying origin of QMOKE could be the key to utilize this effect for investigation of antiferromagnetic materials in the future due to their vanishing first order MOKE contribution. Also, better understanding of QMOKE and hence better understanding of magnetooptic (MO) effects in general is very valuable, as the MO effect is very much employed in research of ferro- and ferrimagnetic materials. Therefore, we present our QMOKE and longitudinal MOKE spectroscopy setup with a spectral range of 0.8--5.5\,eV. The setup is based on light modulation through a photoelastic modulator and detection of second-harmonic intensity by a lock-in amplifier. To measure the Kerr ellipticity an achromatic compensator is used within the setup, whereas without it Kerr rotation is measured. The separation of QMOKE spectra directly from the measured data is based on measurements with multiple magnetization directions. So far the QMOKE separation algorithm is developed and tested for but not limited to cubic (001) oriented samples. The QMOKE spectra yielded by our setup arise from two quadratic MO parameters $G_s$ and $2G_{44}$, being elements of quadratic MO tensor $\bm{G}$, which describe perturbation of the permittivity tensor in the second order in $\bm{M}$.
△ Less
Submitted 13 February, 2018;
originally announced February 2018.
-
Band structure of CuMnAs probed by optical and photoemission spectroscopy
Authors:
M. Veis,
J. Minar,
G. Steciuk,
L. Palatinus,
C. Rinaldi,
M. Cantoni,
D. Kriegner,
K. K. Tikuisis,
J. Hamrle,
M. Zahradnik,
R. Antos,
J. Zelezny,
L. Smejkal,
P. Wadley,
R. P. Campion,
C. Frontera,
K. Uhlirova,
T. Duchon,
P. Kuzel,
V. Novak,
T. Jungwirth,
K. Vyborny
Abstract:
Tetragonal phase of CuMnAs progressively appears as one of the key materials for antiferromagnetic spintronics due to efficient current-induced spin-orbit torques whose existence can be directly inferred from crystal symmetry. Theoretical understanding of spintronic phenomena in this material, however, relies on the detailed knowledge of electronic structure (band structure and corresponding wave…
▽ More
Tetragonal phase of CuMnAs progressively appears as one of the key materials for antiferromagnetic spintronics due to efficient current-induced spin-orbit torques whose existence can be directly inferred from crystal symmetry. Theoretical understanding of spintronic phenomena in this material, however, relies on the detailed knowledge of electronic structure (band structure and corresponding wave functions) which has so far been tested only to a limited extent. We show that AC permittivity (obtained from ellipsometry) and UV photoelectron spectra agree with density functional calculations. Together with the x-ray diffraction and precession electron diffraction tomography, our analysis confirms recent theoretical claim [Phys.Rev.B 96, 094406 (2017)] that copper atoms occupy lattice positions in the basal plane of the tetragonal unit cell.
△ Less
Submitted 21 December, 2017; v1 submitted 4 December, 2017;
originally announced December 2017.
-
Principal spectra describing magnetooptic permittivity tensor in cubic crystals
Authors:
Jana Hamrlová,
Dominik Legut,
Martin Veis,
Jaromír Pištora,
Jaroslav Hamrle
Abstract:
We provide unified phenomenological description of magnetooptic effects being linear and quadratic in magnetization. The description is based on few principal spectra, describing elements of permittivity tensor up to the second order in magnetization. Each permittivity tensor element for any magnetization direction and any sample surface orientation is simply determined by weighted summation of th…
▽ More
We provide unified phenomenological description of magnetooptic effects being linear and quadratic in magnetization. The description is based on few principal spectra, describing elements of permittivity tensor up to the second order in magnetization. Each permittivity tensor element for any magnetization direction and any sample surface orientation is simply determined by weighted summation of the principal spectra, where weights are given by crystallographic and magnetization orientations. The number of principal spectra depends on the symmetry of the crystal. In cubic crystals owning point symmetry we need only four principal spectra. Here, the principal spectra are expressed by ab-initio calculations for bcc Fe, fcc Co and fcc Ni in optical range as well as in hard and soft x-ray energy range, i.e. at the 2p- and 3p-edges. We also express principal spectra analytically using modified Kubo formula.
△ Less
Submitted 8 July, 2016; v1 submitted 19 March, 2016;
originally announced March 2016.
-
Systematic study of magnetic linear dichroism and birefringence in (Ga,Mn)As
Authors:
N. Tesarova,
T. Ostatnicky,
V. Novak,
K. Olejnik,
J. Subrt,
C. T. Ellis,
A. Mukherjee,
J. Lee,
G. M. Sipahi,
J. Sinova,
J. Hamrle,
T. Jungwirth,
P. Nemec,
J. Cerne,
K. Vyborny
Abstract:
Magnetic linear dichroism and birefringence in (Ga,Mn)As epitaxial layers is investigated by measuring the polarization plane rotation of reflected linearly polarized light when magnetization lies in the plane of the sample. We report on the spectral dependence of the rotation and ellipticity angles in a broad energy range of 0.12-2.7 eV for a series of optimized samples covering a wide range on M…
▽ More
Magnetic linear dichroism and birefringence in (Ga,Mn)As epitaxial layers is investigated by measuring the polarization plane rotation of reflected linearly polarized light when magnetization lies in the plane of the sample. We report on the spectral dependence of the rotation and ellipticity angles in a broad energy range of 0.12-2.7 eV for a series of optimized samples covering a wide range on Mn-dopings and Curie temperatures and find a clear blue shift of the dominant peak at energy exceeding the host material band gap. These results are discussed in the general context of the GaAs host band structure and also within the framework of the k.p and mean-field kinetic-exchange model of the (Ga,Mn)As band structure. We find a semi-quantitative agreement between experiment and theory and discuss the role of disorder-induced non-direct transitions on magneto-optical properties of (Ga,Mn)As.
△ Less
Submitted 27 August, 2013;
originally announced August 2013.
-
Quadratic-in-magnetization permittivity and conductivity tensor in cubic crystals
Authors:
Jana Hamrlová,
Jaroslav Hamrle,
Kamil Postava,
Jaromír Pištora
Abstract:
We present diagonal and off-diagonal elements of the permittivity and conductivity tensor up to the second order in magnetization for cubic crystals. We express all tensor elements as a function of a general sample orientation, for arbitrary magnetization direction and for (001), (011) and (111) surface orientations. Finally, we discuss, how to extract values of quadratic elements G of the second…
▽ More
We present diagonal and off-diagonal elements of the permittivity and conductivity tensor up to the second order in magnetization for cubic crystals. We express all tensor elements as a function of a general sample orientation, for arbitrary magnetization direction and for (001), (011) and (111) surface orientations. Finally, we discuss, how to extract values of quadratic elements G of the second order permittivity tensors for different sample surface orientations from both experiment and ab-initio calculations.
△ Less
Submitted 22 July, 2013; v1 submitted 21 October, 2012;
originally announced October 2012.
-
Optical detection of spin transport in non-magnetic metals
Authors:
F. Fohr,
Y. Fukuma,
S. Kaltenborn,
L. Wang,
J. Hamrle,
H. Schultheiß,
A. A. Serga,
H. C. Schneider,
Y. Otani,
B. Hillebrands
Abstract:
We determine the dynamic magnetization induced in non-magnetic metal wedges composed of silver, copper and platinum by means of Brillouin light scattering (BLS) microscopy. The magnetization is transferred from a ferromagnetic Ni80Fe20 layer to the metal wedge via the spin pumping effect. The spin pumping efficiency can be controlled by adding an insulating but transparent interlayer between the m…
▽ More
We determine the dynamic magnetization induced in non-magnetic metal wedges composed of silver, copper and platinum by means of Brillouin light scattering (BLS) microscopy. The magnetization is transferred from a ferromagnetic Ni80Fe20 layer to the metal wedge via the spin pumping effect. The spin pumping efficiency can be controlled by adding an insulating but transparent interlayer between the magnetic and non-magnetic layer. By comparing the experimental results to a dynamical macroscopic spin-transport model we determine the transverse relaxation time of the pumped spin current which is much smaller than the longitudinal relaxation time.
△ Less
Submitted 27 April, 2011; v1 submitted 21 November, 2010;
originally announced November 2010.
-
Analytical expression of the magneto-optical Kerr effect and Brillouin light scattering intensity arising from dynamic magnetization
Authors:
Jaroslav Hamrle,
Jaromír Pištora,
Burkard Hillebrands,
Benjamin Lenk,
Markus Muenzenberg
Abstract:
Time-resolved magneto-optical Kerr effect (MOKE) and Brillouin light scattering (BLS) spectroscopy are important techniques for the investigation of magnetization dynamics. Within this article, we calculate analytically the MOKE and BLS signals from prototypical spin-wave modes in the ferromagnetic layer. The reliability of the analytical expressions is confirmed by optically exact numerical calcu…
▽ More
Time-resolved magneto-optical Kerr effect (MOKE) and Brillouin light scattering (BLS) spectroscopy are important techniques for the investigation of magnetization dynamics. Within this article, we calculate analytically the MOKE and BLS signals from prototypical spin-wave modes in the ferromagnetic layer. The reliability of the analytical expressions is confirmed by optically exact numerical calculations. Finally, we discuss the dependence of the MOKE and BLS signals on the ferromagnetic layer thickness.
△ Less
Submitted 9 June, 2010;
originally announced June 2010.
-
Exchange stiffness in Co$_{2}$-based Heusler compounds
Authors:
Jaroslav Hamrle,
Oksana Gaier,
Simon Trudel,
Burkard Hillebrands,
Horst Schneider,
Gerhard Jakob
Abstract:
We determine the spin wave exchange stiffness $D$ and the exchange constant $A$ for the full Heusler compound \CFS using Brillouin light scattering spectroscopy. We find an extraordinarily large value of $D=715\pm20$ meV Å$^2$ ($A=31.5\pm1.0$ pJ/m) which is, to the best of our knowledge, only surpassed by the intermetallic compound Fe$_{53}$Co$_{47}$ (J. Appl. Phys. \textbf{75}, 7021 (1994)). Fu…
▽ More
We determine the spin wave exchange stiffness $D$ and the exchange constant $A$ for the full Heusler compound \CFS using Brillouin light scattering spectroscopy. We find an extraordinarily large value of $D=715\pm20$ meV Å$^2$ ($A=31.5\pm1.0$ pJ/m) which is, to the best of our knowledge, only surpassed by the intermetallic compound Fe$_{53}$Co$_{47}$ (J. Appl. Phys. \textbf{75}, 7021 (1994)). Furthermore, we provide a systematization of the exchange stiffnesses determined for a variety of Co$_2$-based Heusler compounds. We find that for the investigated compounds, the exchange stiffness is a function of the valence electron concentration and the crystallographic ordering. The exchange stiffness increases when the valence electron concentration and/or the amount of the L2$_1$ ordering increase. A qualitative explanation for the dependence on the valence electron concentration is provided.
△ Less
Submitted 27 April, 2009;
originally announced April 2009.
-
Phase sensitive Brillouin scattering measurements with a novel magneto-optic modulator
Authors:
F. Fohr,
A. A. Serga,
T. Schneider,
J. Hamrle,
B. Hillebrands
Abstract:
A recently reported phase sensitive Brillouin light scattering technique is improved by use of a magnetic modulator. This modulator is based on Brillouin light scattering in a thin ferrite film. Using this magnetic modulator in time- and space Brillouin light scattering measurements we have increased phase contrast and excluded influence of optical inhomogeneities in the sample. We also demonstr…
▽ More
A recently reported phase sensitive Brillouin light scattering technique is improved by use of a magnetic modulator. This modulator is based on Brillouin light scattering in a thin ferrite film. Using this magnetic modulator in time- and space Brillouin light scattering measurements we have increased phase contrast and excluded influence of optical inhomogeneities in the sample. We also demonstrate that the quality of the resulting interference patterns can be improved by data postprocessing using the simultaneously recorded information about the reference light.
△ Less
Submitted 20 January, 2009;
originally announced January 2009.
-
Brillouin light scattering study of Co$_{2}$Cr$_{0.6}$Fe$_{0.4}$Al and Co$_{2}$FeAl Heusler compounds
Authors:
O. Gaier,
J. Hamrle,
S. Trudel,
A. Conca Parra,
B. Hillebrands,
E. Arbelo,
C. Herbort,
M. Jourdan
Abstract:
The thermal magnonic spectra of Co$_{2}$Cr$_{0.6}$Fe$_{0.4}$Al (CCFA) and Co$_2$FeAl were investigated using Brillouin light scattering spectroscopy (BLS). For CCFA, the exchange constant A (exchange stiffness D) is found to be 0.48 $μ$erg/cm (203 meV A$^2$), while for Co$_2$FeAl the corresponding values of 1.55 $μ$erg/cm (370 meV A$^2$) were found. The observed asymmetry in the BLS spectra betw…
▽ More
The thermal magnonic spectra of Co$_{2}$Cr$_{0.6}$Fe$_{0.4}$Al (CCFA) and Co$_2$FeAl were investigated using Brillouin light scattering spectroscopy (BLS). For CCFA, the exchange constant A (exchange stiffness D) is found to be 0.48 $μ$erg/cm (203 meV A$^2$), while for Co$_2$FeAl the corresponding values of 1.55 $μ$erg/cm (370 meV A$^2$) were found. The observed asymmetry in the BLS spectra between the Stokes and anti-Stokes frequencies was assigned to an interplay between the asymmetrical profiles of hybridized Damon-Esbach and perpendicular standing spin-wave modes, combined with the optical sensitivity of the BLS signal to the upper side of the CCFA or Co$_2$FeAl film.
△ Less
Submitted 29 January, 2009; v1 submitted 5 October, 2008;
originally announced October 2008.
-
Determination of exchange constants of Heusler compounds by Brillouin light scattering spectroscopy: application to Co$_2$MnSi
Authors:
J. Hamrle,
O. Gaier,
Seong-Gi Min,
B. Hillebrands,
Y. Sakuraba,
Y. Ando
Abstract:
Brillouin light scattering spectroscopy from so-called standing spin waves in thin magnetic films is often used to determine the magnetic exchange constant. The data analysis of the experimentally determined spin-wave modes requires an unambiguous assignment to the correct spin wave mode orders. Often additional investigations are needed to guarantee correct assignment. This is particularly impo…
▽ More
Brillouin light scattering spectroscopy from so-called standing spin waves in thin magnetic films is often used to determine the magnetic exchange constant. The data analysis of the experimentally determined spin-wave modes requires an unambiguous assignment to the correct spin wave mode orders. Often additional investigations are needed to guarantee correct assignment. This is particularly important in the case of Heusler compounds where values of the exchange constant vary substantially between different compounds. As a showcase, we report on the determination of the exchange constant (exchange stiffness constant) in Co$_2$MnSi, which is found to be $A=2.35\pm0.1$ $μ$erg/cm ($D=575\pm20$ meV Å$^2$), a value comparable to the value of the exchange constant of Co.
△ Less
Submitted 10 February, 2009; v1 submitted 5 October, 2008;
originally announced October 2008.
-
Improvement of structural, electronic, and magnetic properties of Co$_2$MnSi thin films by He$^+$-irradiation
Authors:
O. Gaier,
J. Hamrle,
B. Hillebrands,
M. Kallmayer,
P. Pörsch,
G. Schönhense,
H. J. Elmers,
J. Fassbender,
A. Gloskovskii,
C. A. Jenkins,
G. H. Fecher,
C. Felser,
E. Ikenaga,
Y. Sakuraba,
S. Tsunegi,
M. Oogane,
Y. Ando
Abstract:
The influence of 30 keV He$^+$ ion irradiation on structural, electronic and magnetic properties of Co$_2$MnSi thin films with B2 order was investigated. It was found, that irradiation with light ions can improve the local chemical order. This provokes changes of the electronic structure and element-specific magnetization towards the bulk properties of the well-ordered Co$_2$MnSi Heusler compoun…
▽ More
The influence of 30 keV He$^+$ ion irradiation on structural, electronic and magnetic properties of Co$_2$MnSi thin films with B2 order was investigated. It was found, that irradiation with light ions can improve the local chemical order. This provokes changes of the electronic structure and element-specific magnetization towards the bulk properties of the well-ordered Co$_2$MnSi Heusler compound with L2$_1$ structure.
△ Less
Submitted 18 September, 2008;
originally announced September 2008.
-
Unusual spin-wave population in nickel after femtosecond laser pulse excitation
Authors:
Benjamin Lenk,
Gerrit Eilers,
Jaroslav Hamrle,
Markus Münzenberg
Abstract:
The spin-wave relaxation mechanisms after intense laser excitation in ferromagnetic nickel films are investigated with all-optical pump-probe experiments. Uniform precession (Kittel mode), Damon-Eshbach surface modes and perpendicular standing spin waves can be identified by their dispersion f(H). However, different to other ferromagnets f(H) deviates from the expected behavior. Namely, a mode dis…
▽ More
The spin-wave relaxation mechanisms after intense laser excitation in ferromagnetic nickel films are investigated with all-optical pump-probe experiments. Uniform precession (Kittel mode), Damon-Eshbach surface modes and perpendicular standing spin waves can be identified by their dispersion f(H). However, different to other ferromagnets f(H) deviates from the expected behavior. Namely, a mode discontinuity is observed, that can be attributed to a non-linear process. Above a critical field the power spectrum reveals a redistribution of the energy within the spin-wave spectrum populated.
△ Less
Submitted 22 June, 2010; v1 submitted 26 March, 2008;
originally announced March 2008.
-
Influence of the L21 ordering degree on the magnetic properties in Co2MnSi Heusler films
Authors:
O. Gaier,
J. Hamrle,
S. J. Hermsdoerfer,
B. Hillebrands,
Y. Sakuraba,
M. Oogane,
Y. Ando
Abstract:
We report on the influence of the improved L21 ordering degree on the magnetic properties of Co2MnSi Heusler films. Different fractions of the L21 phase are obtained by different post-growth annealing temperatures ranging from 350 degC to 500 degC. Room temperature magneto-optical Kerr effect measurements reveal an increase of the coercivity at an intermediate annealing temperature of 425 degC,…
▽ More
We report on the influence of the improved L21 ordering degree on the magnetic properties of Co2MnSi Heusler films. Different fractions of the L21 phase are obtained by different post-growth annealing temperatures ranging from 350 degC to 500 degC. Room temperature magneto-optical Kerr effect measurements reveal an increase of the coercivity at an intermediate annealing temperature of 425 degC, which is a fingerprint of an increased number of pinning centers at this temperature. Furthermore, Brillouin light scattering studies show that the improvement of the L21 order in the Co2MnSi films is correlated with a decrease of the saturation magnetization by about 9%. The exchange stiffness constant of Co2MnSi, however, increases by about 8% when the L21 order is improved. Moreover, we observe a drop of the cubic anisotropy constant K1 by a factor of 10 for an increasing amount of the L21 phase.
△ Less
Submitted 24 August, 2007;
originally announced August 2007.
-
Huge quadratic magneto-optical Kerr effect and magnetization reversal in the Co$_2$FeSi Heusler compound
Authors:
J. Hamrle,
S. Blomeier,
O. Gaier,
B. Hillebrands,
H. Schneider,
G. Jakob,
K. Postava,
C. Felser
Abstract:
Co$_2$FeSi(100) films with L2$_1$ structure deposited onto MgO(100) were studied exploiting both longitudinal (LMOKE) and quadratic (QMOKE) magneto-optical Kerr effect. The films exhibit a huge QMOKE signal with a maximum contribution of up to 30 mdeg, which is the largest QMOKE signal in reflection that has been measured thus far. This large value is a fingerprint of an exceptionally large spin…
▽ More
Co$_2$FeSi(100) films with L2$_1$ structure deposited onto MgO(100) were studied exploiting both longitudinal (LMOKE) and quadratic (QMOKE) magneto-optical Kerr effect. The films exhibit a huge QMOKE signal with a maximum contribution of up to 30 mdeg, which is the largest QMOKE signal in reflection that has been measured thus far. This large value is a fingerprint of an exceptionally large spin-orbit coupling of second or higher order. The Co$_2$FeSi(100) films exhibit a rather large coercivity of 350 and 70 Oe for film thicknesses of 22 and 98 nm, respectively. Despite the fact that the films are epitaxial, they do not provide an angular dependence of the anisotropy and the remanence in excess of 1% and 2%, respectively.
△ Less
Submitted 16 January, 2007; v1 submitted 27 September, 2006;
originally announced September 2006.
-
Ion beam induced modification of exchange interaction and spin-orbit coupling in the Co$_2$FeSi Heusler compound
Authors:
J. Hamrle,
S. Blomeier,
O. Gaier,
B. Hillebrands,
H. Schneider,
G. Jakob,
B. Reuscher,
A. Brodyanski,
M. Kopnarski,
K. Postava,
C. Felser
Abstract:
A Co$_2$FeSi (CFS) film with L2$_1$ structure was irradiated with different fluences of 30 keV Ga$^+$ ions. Structural modifications were subsequently studied using the longitudinal (LMOKE) and quadratic (QMOKE) magneto-optical Kerr effect. Both the coercivity and the LMOKE amplitude were found to show a similar behavior upon irradiation: they are nearly constant up to ion fluences of…
▽ More
A Co$_2$FeSi (CFS) film with L2$_1$ structure was irradiated with different fluences of 30 keV Ga$^+$ ions. Structural modifications were subsequently studied using the longitudinal (LMOKE) and quadratic (QMOKE) magneto-optical Kerr effect. Both the coercivity and the LMOKE amplitude were found to show a similar behavior upon irradiation: they are nearly constant up to ion fluences of $\approx6\times10^{15}$ ion/cm$^2$, while they decrease with further increasing fluences and finally vanish at a fluence of $\approx9\times10^{16}$ ion/cm$^2$, when the sample becomes paramagnetic. However, contrary to this behavior, the QMOKE signal nearly vanishes even for the smallest applied fluence of $3\times10^{14}$ ion/cm$^2$. We attribute this reduction of the QMOKE signal to an irradiation-induced degeneration of second or higher order spin-orbit coupling, which already happens at small fluences of 30 keV Ga$^+$ ions. On the other hand, the reduction of coercivity and LMOKE signal with high ion fluences is probably caused by a reduction of the exchange interaction within the film material.
△ Less
Submitted 16 January, 2007; v1 submitted 25 September, 2006;
originally announced September 2006.
-
Magnetic anisotropies and magnetization reversal of the Co$_2$Cr$_{0.6}$Fe$_{0.4}$Al Heusler compound
Authors:
J. Hamrle,
S. Blomeier,
O. Gaier,
B. Hillebrands,
R. Schafer,
M. Jourdan
Abstract:
Magnetic anisotropies and magnetization reversal properties of the epitaxial Heusler compound Co$_2$Cr$_{0.6}$Fe$_{0.4}$Al (CCFA) deposited on Fe and Cr buffer layers are studied. Both samples exhibit a growth-induced fourfold anisotropy, and magnetization reversal occurs through the formation of stripy domains or 90 degree domains. During rotational magnetometric scans the sample deposited on C…
▽ More
Magnetic anisotropies and magnetization reversal properties of the epitaxial Heusler compound Co$_2$Cr$_{0.6}$Fe$_{0.4}$Al (CCFA) deposited on Fe and Cr buffer layers are studied. Both samples exhibit a growth-induced fourfold anisotropy, and magnetization reversal occurs through the formation of stripy domains or 90 degree domains. During rotational magnetometric scans the sample deposited on Cr exhibits about 2 degree sharp peaks in the angular dependence of the coercive field, which are oriented along the hard axis directions. These peaks are a consequence of the specific domain structure appearing in this particular measurement geometry. A corresponding feature in the sample deposited on Fe is not observed.
△ Less
Submitted 21 June, 2006;
originally announced June 2006.
-
Switching magnetization of nano-scale ferromagnetic particle using non-local spin injection
Authors:
T. Kimura,
Y. Otani,
J. Hamrle
Abstract:
We have performed non-local spin injection into a nano-scale ferromagnetic particle configured in a lateral spin valve structure to switch its magnetization only by spin current. The non-local spin injection aligns the magnetization of the particle parallel to the magnetization of the spin injector. The responsible spin current for switching is estimated from the experiment to be about 200 $μ$A,…
▽ More
We have performed non-local spin injection into a nano-scale ferromagnetic particle configured in a lateral spin valve structure to switch its magnetization only by spin current. The non-local spin injection aligns the magnetization of the particle parallel to the magnetization of the spin injector. The responsible spin current for switching is estimated from the experiment to be about 200 $μ$A, which is reasonable compared with the values obtained for conventional pillar structures. Interestingly the switching always occurs from anti-parallel to parallel in the particle/injector magnetic configurations, whereas no opposite switching is observed. Possible reasons for this discrepancy are discussed.
△ Less
Submitted 23 August, 2005;
originally announced August 2005.
-
Estimation of spin-diffusion length from the magnitude of spin current absorption
Authors:
T. Kimura,
J. Hamrle,
Y. Otani
Abstract:
We demonstrate the method to calculate the spatial distributions of the spin current and accumulation in the multi-terminal ferromagnetic/nonmagnetic hybrid structure using an approximate electro-transmission line. The analyses based on the obtained equation yield the results in good agreement with the experimental ones. This implies that the method allows us to determine the spin diffusion leng…
▽ More
We demonstrate the method to calculate the spatial distributions of the spin current and accumulation in the multi-terminal ferromagnetic/nonmagnetic hybrid structure using an approximate electro-transmission line. The analyses based on the obtained equation yield the results in good agreement with the experimental ones. This implies that the method allows us to determine the spin diffusion length of additionally connected electrically floating wire from the reduction of the spin signal.
△ Less
Submitted 31 May, 2005;
originally announced May 2005.
-
Current distribution inside Py/Cu lateral spin-valve device
Authors:
J. Hamrle,
T. Kimura,
Y. Otani,
K. Tsukagoshi,
Y. Aoyagi
Abstract:
We have investigated experimentally the non-local voltage signal (NLVS) in the lateral permalloy (Py)/Cu/Py spin valve devices with different width of Cu stripes. We found that NLVS strongly depends on the distribution of the spin-polarized current inside Cu strip in the vicinity of the Py-detector. To explain these data we have developed a diffusion model describing spatial (3D) distribution of…
▽ More
We have investigated experimentally the non-local voltage signal (NLVS) in the lateral permalloy (Py)/Cu/Py spin valve devices with different width of Cu stripes. We found that NLVS strongly depends on the distribution of the spin-polarized current inside Cu strip in the vicinity of the Py-detector. To explain these data we have developed a diffusion model describing spatial (3D) distribution of the spin-polarized current in the device. The results of our calculations show that NLVS is decreased by factor of 10 due to spin flip-scattering occurring at Py/Cu interface. The interface resistivity on Py/Cu interface is also present, but its contribution to reduction of NLVS is minor. We also found that most of the spin-polarized current is injected within the region 30 nm from Py-injector/Cu interface. In the area at Py-detector/Cu interface, the spin-polarized current is found to flow mainly close on the injector side, with 1/e exponential decay in the magnitude within the distance 80 nm.
△ Less
Submitted 9 October, 2004;
originally announced October 2004.
-
3-dimensional distribution of spin-polarized current: application to (Cu/Co) pillar structures
Authors:
J. Hamrle,
T. Kimura,
T. Yang,
Y. Otani
Abstract:
We present a formalism determining spin-polarized current and electrochemical potential inside arbitrary electric circuit within diffusive regime for parallel/antiparallel magnetic states. When arbitrary nano-structure is expressed by 3-dimensional (3D) electric circuit, we can determine 3D spin-polarized current and electrochemical potential distributions inside it. We apply this technique to (…
▽ More
We present a formalism determining spin-polarized current and electrochemical potential inside arbitrary electric circuit within diffusive regime for parallel/antiparallel magnetic states. When arbitrary nano-structure is expressed by 3-dimensional (3D) electric circuit, we can determine 3D spin-polarized current and electrochemical potential distributions inside it. We apply this technique to (Cu/Co) pillar structures, where pillar is terminated either by infinitely large Cu layer, or by Cu wire with identical cross-sectional area as pillar itself. We found that infinitely large Cu layers work as a strong spin-scatterers, increasing magnitude of spin-polarized current inside the pillar twice and reducing spin accumulation nearly to zero. As most experimentally studied pillar structures are terminated by such a infinitely large layers, we propose modification of standard Valet-Fert formalism to simply include influence of such infinitely large layers.
△ Less
Submitted 12 September, 2004;
originally announced September 2004.
