Breaking 1.7V open circuit voltage in large area transparent perovskite solar cells using bulk and interfaces passivation
Authors:
Fabio Matteocci,
Diego Di Girolamo,
Guillame Vidon,
Jessica Barichello,
Francesco Di Giacomo,
Farshad Jafarzadeh,
Barbara Paci,
Amanda Generosi,
Minjin Kim,
Luigi Angelo Castriotta,
Mathieu Frégnaux,
Jean-François Guillemoles,
Philip Schulz,
Daniel Ory,
Stefania Cacovich,
Aldo Di Carlo
Abstract:
Efficient semi-transparent solar cells can trigger the adoption of building integrated photovoltaics. Halide perovskites are particularly suitable in this respect owing to their tunable bandgap. Main drawbacks in the development of transparent perovskite solar cells are the high Voc deficit and the difficulties in depositing thin films over large area substrates, given the low solubility of bromid…
▽ More
Efficient semi-transparent solar cells can trigger the adoption of building integrated photovoltaics. Halide perovskites are particularly suitable in this respect owing to their tunable bandgap. Main drawbacks in the development of transparent perovskite solar cells are the high Voc deficit and the difficulties in depositing thin films over large area substrates, given the low solubility of bromide and chloride precursors. In this work, we develop a 2D and passivation strategies for the high band-gap Br perovskite able to reduce charge recombination and consequently improving the open-circuit voltage. We demonstrate 1cm 2 perovskite solar cells with Voc up to 1.73 V (1.83 eV QFLS) and a PCE of 8.2%. The AVT exceeds 70% by means of a bifacial light management and a record light utilization efficiency of 5.72 is achieved, setting a new standard for transparent photovoltaics. Moreover, we show the high ceiling of our technology towards IoT application due to a bifaciality factor of 87% along with 17% PCE under indoor lighting. Finally, the up-scaling has been demonstrated fabricating 20cm 2 -active area modules with PCE of 7.3% and Voc per cell up to 1.65V.
△ Less
Submitted 31 January, 2024;
originally announced January 2024.
Matching the photocurrent of perovskite/organic tandem solar modules by varying the cell width
Authors:
Jose Garcia Cerrillo,
Andreas Distler,
Fabio Matteocci,
Karen Forberich,
Michael Wagner,
Robin Basu,
Luigi Angelo Castriotta,
Farshad Jafarzadeh,
Francesca Brunetti,
Fu Yang,
Ning Li,
Asiel Neftali Corpus Mendoza,
Aldo Di Carlo,
Christoph J. Brabec,
Hans-Joachim Egelhaaf
Abstract:
Photocurrent matching in conventional monolithic tandem solar cells is achieved by choosing semiconductors with complementary absorption spectra and by carefully adjusting the optical properties of the complete top and bottom stacks. However, for thin film photovoltaic technologies at the module level, another design variable significantly alleviates the task of photocurrent matching, namely the c…
▽ More
Photocurrent matching in conventional monolithic tandem solar cells is achieved by choosing semiconductors with complementary absorption spectra and by carefully adjusting the optical properties of the complete top and bottom stacks. However, for thin film photovoltaic technologies at the module level, another design variable significantly alleviates the task of photocurrent matching, namely the cell width, whose modification can be readily realized by the adjustment of the module layout. Herein we demonstrate this concept at the experimental level for the first time for a 2T-mechanically stacked perovskite (FAPbBr3)/organic (PM6:Y6:PCBM) tandem mini-module, an unprecedented approach for these emergent photovoltaic technologies fabricated in an independent manner. An excellent Isc matching is achieved by tuning the cell widths of the perovskite and organic modules to 7.22 mm (PCEPVKT-mod= 6.69%) and 3.19 mm (PCEOPV-mod= 12.46%), respectively, leading to a champion efficiency of 14.94% for the tandem module interconnected in series with an aperture area of 20.25 cm2. Rather than demonstrating high efficiencies at the level of small lab cells, our successful experimental proof-of-concept at the module level proves to be particularly useful to couple devices with non-complementary semiconductors, either in series or in parallel electrical connection, hence overcoming the limitations imposed by the monolithic structure.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
