-
Exotic Magnetic and Electronic Properties of Layered CrI3 Single Crystals Under High Pressure
Authors:
Anirudha Ghosh,
D. Singh,
Qingge Mu,
Y. Kvashnin,
G. Haider,
M. Jonak,
D. Chareev,
T. Aramaki,
S. A. Medvedev,
R. Klingeler,
M. Mito,
E. H. Abdul-Hafidh,
J. Vejpravova,
M. Kalbac,
R. Ahuja,
Olle Eriksson,
Mahmoud Abdel-Hafiez
Abstract:
Through advanced experimental techniques on CrI$_{3}$ single crystals, we derive a previously not discussed pressure-temperature phase diagram. We find that $T_{c}$ increases to $\sim$ 66\,K with pressure up to $\sim$ 3\,GPa followed by a decrease to $\sim$ 10\,K at 21.2\,GPa. The experimental results are reproduced by theoretical calculations based on density functional theory where electron-elec…
▽ More
Through advanced experimental techniques on CrI$_{3}$ single crystals, we derive a previously not discussed pressure-temperature phase diagram. We find that $T_{c}$ increases to $\sim$ 66\,K with pressure up to $\sim$ 3\,GPa followed by a decrease to $\sim$ 10\,K at 21.2\,GPa. The experimental results are reproduced by theoretical calculations based on density functional theory where electron-electron interactions are treated by a static on-site Hubbard U on Cr 3$d$ orbitals. The origin of the pressure induced reduction of the ordering temperature is associated with a decrease of the calculated bond angle, from 95$^{\circ}$ at ambient pressure to $\sim$ 85$^{\circ}$ at 25\,GPa. Above 22\,GPa, the magnetically ordered state is essentially quenched, possibly driving the system to a Kitaev spin-liquid state at low temperature, thereby opening up the possibility of further exploration of long-range quantum entanglement between spins. The pressure-induced semiconductor-to-metal phase transition was revealed by high-pressure resistivity that is accompanied by a transition from a robust ferromagnetic state to gradually more dominating anti-ferromagnetic interactions and was consistent with theoretical modeling.
△ Less
Submitted 31 July, 2021;
originally announced August 2021.
-
Enhanced Raman Scattering on Functionalized Graphene Substrates
Authors:
Václav Valeš,
Petr Kovaříček,
Michaela Fridrichová,
Xiang Ji,
Xi Ling,
Jing Kong,
Mildred S. Dresselhaus,
Martin Kalbáč
Abstract:
The graphene-enhanced Raman scattering of Rhodamine 6G molecules on pristine, fluorinated and 4-nitrophenyl functionalized graphene substrates was studied. The uniformity of the Raman signal enhancement was studied by making large Raman maps. The relative enhancement of the Raman signal is demonstrated to be dependent on the functional groups, which was rationalized by the different doping levels…
▽ More
The graphene-enhanced Raman scattering of Rhodamine 6G molecules on pristine, fluorinated and 4-nitrophenyl functionalized graphene substrates was studied. The uniformity of the Raman signal enhancement was studied by making large Raman maps. The relative enhancement of the Raman signal is demonstrated to be dependent on the functional groups, which was rationalized by the different doping levels of pristine, fluorinated and 4-nitrophenyl functionalized graphene substrates. The impact of the Fermi energy of graphene and the phonon energy of the molecules was considered together for the first time in order to explain the enhancement. Such approach enables to understand the enhancement without assuming anything about the uniformity of the molecules on the graphene surface. The agreement between the theory and our measured data was further demonstrated by varying excitation energy.
△ Less
Submitted 26 July, 2021;
originally announced July 2021.
-
Addressing Raman features of individual layers in isotopically labeled Bernal stacked bilayer graphene
Authors:
Sara D Costa,
Johan Ek Weis,
Otakar Frank,
Michaela Fridrichová,
Martin Kalbac
Abstract:
The most important bands for the evaluation of strain in graphene (the 2D and 2D prime modes) are investigated. It is shown that for Bernal-stacked bilayers, the two-phonon Raman features have three different components that can be assigned to processes originating solely from the top graphene layer, bottom graphene layer, and from a combination of processes originating both from the top and botto…
▽ More
The most important bands for the evaluation of strain in graphene (the 2D and 2D prime modes) are investigated. It is shown that for Bernal-stacked bilayers, the two-phonon Raman features have three different components that can be assigned to processes originating solely from the top graphene layer, bottom graphene layer, and from a combination of processes originating both from the top and bottom layers. The individual components of the 2D and 2D prime modes are disentangled. The reported results enable addressing the properties of individual graphene layers in isotopically labelled turbostratic and Bernalstacked graphene systems.
△ Less
Submitted 26 July, 2021;
originally announced July 2021.
-
Controlled Doping of Double Walled Carbon Nanotubes and Conducting Polymers in a Composite: An in situ Raman Spectroelectrochemical Study
Authors:
Martin Kalbáč,
Ladislav Kavan,
Lothar Dunsch
Abstract:
The interaction of double wall carbon nanotubes (DWCNTs) and the conducting polymer poly(3,4-ethylenedioxythiphene/polystyrenesulfonate (PEDOT/PSS) was studied by in-situ Raman spectroelectrochemistry. The mixing of DWCNTs with PEDOT/PSS caused a partial doping of the outer tube of DWCNTs, which was indicated by the relative change of the Raman intensity of the DWCNTs features. On the other hand,…
▽ More
The interaction of double wall carbon nanotubes (DWCNTs) and the conducting polymer poly(3,4-ethylenedioxythiphene/polystyrenesulfonate (PEDOT/PSS) was studied by in-situ Raman spectroelectrochemistry. The mixing of DWCNTs with PEDOT/PSS caused a partial doping of the outer tube of DWCNTs, which was indicated by the relative change of the Raman intensity of the DWCNTs features. On the other hand, the bands corresponding to inner tubes of DWCNTs and to the polymer were almost untouched by assembling both species into a composite. The in situ Raman spectroelectrochemical experiments have shown that the changes in electronic structure of inner tubes of DWCNTs embedded in PEDOT/PSS matrix are dependent on the doping level. While at the low doping level of the composite, the Raman features of inner tubes of DWCNTs do not change significantly, at high doping level they reflect the changes caused by the applied electrochemical potential similar to that observed in the polymer-free DWCNTs.
△ Less
Submitted 23 July, 2021;
originally announced July 2021.
-
Controlled oxygen plasma treatment of single-walled carbon nanotube films improves osteoblast cells attachment and enhances their proliferation
Authors:
Marie Kalbacova,
Antonin Broz,
Alexander Kromka,
Oleg Babchenko,
Martin Kalbac
Abstract:
The effects of oxidative treatment of single-walled carbon nanotubes (SWCNTs) on the adhesion and proliferation of human osteoblasts (SAOS-2) were investigated. The surface properties of SWCNTs after oxygen plasma treatment were characterised by contact angle measurement, scanning electron microscopy and Raman spectroscopy. The immunofluorescent staining of vinculin, actin filaments and nuclei was…
▽ More
The effects of oxidative treatment of single-walled carbon nanotubes (SWCNTs) on the adhesion and proliferation of human osteoblasts (SAOS-2) were investigated. The surface properties of SWCNTs after oxygen plasma treatment were characterised by contact angle measurement, scanning electron microscopy and Raman spectroscopy. The immunofluorescent staining of vinculin, actin filaments and nuclei was used to probe cell adhesion and growth on SWCNT films. Our results show that adhesion and proliferation of human osteoblasts cultivated on SWCNT films indeed depends on the degree of an oxidative treatment. As an optimal procedure was found the treatment with oxygen plasma for 5 min. In the latter case the osteoblasts form a confluent layer with pronounced focal adhesions throughout the entire cell body. The optimal conditions compromise the effect of hydrophilic character of SWCNT films and the level of damage of SWCNT surface.
△ Less
Submitted 23 July, 2021;
originally announced July 2021.
-
Towards quantification of the ratio of the single and double wall carbon nanotubes in their mixtures:An In situ Raman spectroelectrochemical study
Authors:
Zuzana Kominkovaa,
Vaclav Vales,
Mark C. Hersam,
Martin Kalbac
Abstract:
Mixtures containing different weight ratios of single wall carbon nanotubes (SWCNT) and double wall carbon nanotubes (DWCNT) were prepared and studied by in-situ Raman spectroelectrochemistry. Two components of the G-prime mode in the Raman spectra, which can be resolved at high electrode potentials, were assigned to the signals from inner tubes of DWCNT and outer tubes of DWCNT together with SWCN…
▽ More
Mixtures containing different weight ratios of single wall carbon nanotubes (SWCNT) and double wall carbon nanotubes (DWCNT) were prepared and studied by in-situ Raman spectroelectrochemistry. Two components of the G-prime mode in the Raman spectra, which can be resolved at high electrode potentials, were assigned to the signals from inner tubes of DWCNT and outer tubes of DWCNT together with SWCNT. The dependence of the ratios of these two components of the G-prime mode on the nominal amount of SWCNT and DWCNT in the samples was simulated so that the residual amount of SWCNT in the original DWCNT could be determined. Additionally, the individual contributions of all components of carbon nanotubes into the total area of the G-prime mode at high electrode potentials were estimated from the simulation.
△ Less
Submitted 22 July, 2021;
originally announced July 2021.
-
Temperature and Face Dependent Copper-Graphene Interactions
Authors:
Sara D. Costa,
Johan Ek Weis,
Otakar Frank,
Martin Kalbac
Abstract:
The interaction between graphene and metals represents an important issue for the large-area preparation of graphene, graphene transfer and the contact quality in graphene devices. We demonstrate a simple method for estimating and manipulating the level of interaction between graphene and copper single crystals through heat treatment, at temperatures from 298K to 1073K. We performed an in-situ Ram…
▽ More
The interaction between graphene and metals represents an important issue for the large-area preparation of graphene, graphene transfer and the contact quality in graphene devices. We demonstrate a simple method for estimating and manipulating the level of interaction between graphene and copper single crystals through heat treatment, at temperatures from 298K to 1073K. We performed an in-situ Raman spectroscopy showing Cu face-specific behavior of the overlying graphene during the heat treatment. On Cu(111) the interaction is consistent with theoretical predictions and remains stable, whereas on Cu(100) and Cu(110), the initially very weak interaction and charge transfer can be tuned by heating. Our results also suggest that graphene grown on Cu(100) and Cu(110) is detached from the copper substrate, thereby possibly enabling an easier graphene transfer process as compared to Cu (111).
△ Less
Submitted 22 July, 2021;
originally announced July 2021.
-
Effect of layer number and layer stacking registry on the formation and quantification of defects in graphene
Authors:
Sara D. Costa,
Johan Ek Weis,
Otakar Frank,
Martin Kalbac
Abstract:
Correct defect quantification in graphene samples is crucial both for fundamental and applied re-search. Raman spectroscopy represents the most widely used tool to identify defects in graphene. However, despite its extreme importance the relation between the Raman features and the amount of defects in multilayered graphene samples has not been experimentally verified. In this study we intentionall…
▽ More
Correct defect quantification in graphene samples is crucial both for fundamental and applied re-search. Raman spectroscopy represents the most widely used tool to identify defects in graphene. However, despite its extreme importance the relation between the Raman features and the amount of defects in multilayered graphene samples has not been experimentally verified. In this study we intentionally created defects in single layer graphene, turbostratic bilayer graphene and Bernal stacked bilayer graphene by oxygen plasma. By employing isotopic labelling, our study reveals substantial differences of the effects of plasma treatment on individual layers in bilayer graphene with different stacking orders. In addition Raman spectroscopy evidences scattering of phonons in the bottom layer by defects in the top layer for Bernal-stacked samples, which can in general lead to overestimation of the number of defects by as much as a factor of two.
△ Less
Submitted 21 July, 2021;
originally announced July 2021.
-
EDOT polymerization at photolithographically patterned functionalized graphene
Authors:
Petr Kovaříček,
Karolina Drogowska,
Zuzana Komínková Melníková,
Václav Blechta,
Zdeněk Bastl,
Daniel Gromadzki,
Michaela Fridrichová,
Martin Kalbáč
Abstract:
Graphene possesses unique features that make it attractive for nanotechnology. Functional devices often require combination of several materials with specific functions, and graphene-polymer composites are one of them. Herein, we report on the preparation of PEDOT:Graphene bilayers by in situ polymerization of EDOT on covalently functionalized graphene. The polymerization proceeds exclusively on t…
▽ More
Graphene possesses unique features that make it attractive for nanotechnology. Functional devices often require combination of several materials with specific functions, and graphene-polymer composites are one of them. Herein, we report on the preparation of PEDOT:Graphene bilayers by in situ polymerization of EDOT on covalently functionalized graphene. The polymerization proceeds exclusively on the grafted graphene, and patterned structures with high spatial resolution down to 3 μm could have been prepared. The composite exhibits enhanced efficiency of electrochemical doping compared to pristine graphene, unsymmetrical transport characteristic with very good hole-transporting properties and efficient electronic communication between the two materials.
△ Less
Submitted 21 July, 2021;
originally announced July 2021.
-
Extended characterization methods for covalent functionalization of graphene on copper
Authors:
Petr Kovaříček,
Vladimír Vrkoslav,
Jan Plšek,
Zdeněk Bastl,
Michaela Fridrichová,
Karolina Drogowska,
Martin Kalbáč
Abstract:
Graphene is a material of great potential in a broad range of applications, for each of which specific tuning of the materials properties is required. This can be achieved, for example, by covalent functionalization. We have exploited two protocols for surface grafting, either by diazonium salts or by nucleophilic exchange, to perform graphene covalent modification directly on a copper substrate,…
▽ More
Graphene is a material of great potential in a broad range of applications, for each of which specific tuning of the materials properties is required. This can be achieved, for example, by covalent functionalization. We have exploited two protocols for surface grafting, either by diazonium salts or by nucleophilic exchange, to perform graphene covalent modification directly on a copper substrate, which is routinely used for the synthesis of the material, and investigated the difference in reactivity compared with other substrates. The successful functionalization was confirmed by Raman and surface-enhanced Raman spectroscopy, mass spectrometry, X-ray photoelectron spectroscopy and scanning electron microscopy with energy-dispersive X-ray spectroscopy. In addition, we have found that the copper substrate can serve as a plasmonic surface enhancing the Raman spectra. Furthermore, the covalent grafting was shown to tolerate the transfer process, thus allowing ex post transfer from copper to other substrates. This protocol avoids wet processing and enables an all-gas-phase transformation of functionalized graphene, which eliminates the main sources of contamination.
△ Less
Submitted 20 July, 2021;
originally announced July 2021.
-
Large scale chemical functionalization of graphene with nanometer resolution
Authors:
Karolina Drogowska,
Václav Valeš,
Jan Plšek,
Magdalena Michlová,
Jana Vejpravová,
Martin Kalbáč
Abstract:
Anchoring various functional groups to graphene is the most versatile approach for tailoring its functional properties. To date, one must use a special tunneling microscope for attaching a molecule at a specific position on the graphene with resolution better than several hundred nanometers, however, achieving this resolution is impossible on a large scale. We demonstrate for the first time that c…
▽ More
Anchoring various functional groups to graphene is the most versatile approach for tailoring its functional properties. To date, one must use a special tunneling microscope for attaching a molecule at a specific position on the graphene with resolution better than several hundred nanometers, however, achieving this resolution is impossible on a large scale. We demonstrate for the first time that chemical functionalization can be achieved with nanometer resolution by introducing strain with nanometer scale modulation into a graphene layer. The spatial distribution of the strain has been achieved by transferring a single-layer graphene (SLG) onto a substrate decorated by a few nm large nanoparticles (NPs). By changing the number of NPs on the substrate, the amount of locally strained SLG increases, as confirmed by atomic force microscopy (AFM) and Raman spectroscopy investigations. We further carried out hydrogenation and fluorination on the SLG with increasing amount of nanoscale corrugations. Raman spectroscopy, AFM and X-ray photoelectron spectroscopy revealed unambiguously that the level of functionalization increases proportionally with the number of NPs, which means an increasing number of the locally strained SLG. Our approach thus enables control of the amount and the position of functional groups on graphene with nanometer resolution.
△ Less
Submitted 20 July, 2021;
originally announced July 2021.
-
Surface enhanced infrared absorption spectroscopy for graphene functionalization on copper
Authors:
Irena Matulková,
Petr Kovaříček,
Miroslav Šlouf,
Ivan Němec,
Martin Kalbáč
Abstract:
The monolayer form of CVD graphene is imposing crucial challenges in characterization of the targeted covalent functionalization due to the low amount of grafting moieties on the surface, which in turn hampers drawing conclusions about reactivity-properties relationships. Due to the growing interest in chemically modified graphene new, reliable and non-destructive methods for its characterization…
▽ More
The monolayer form of CVD graphene is imposing crucial challenges in characterization of the targeted covalent functionalization due to the low amount of grafting moieties on the surface, which in turn hampers drawing conclusions about reactivity-properties relationships. Due to the growing interest in chemically modified graphene new, reliable and non-destructive methods for its characterization are critically required. Herein we demonstrate the use of surface-enhanced infrared absorption spectroscopy for detection of characteristic vibration modes of species being grafted to the material either via radical (Meerwein arylation) or nucleophilic substitution pathway on copper foil. The phenomenon is allowed by the appropriate metal surface morphology and no signal could have been obtained neither on Si/SiO2 substrate, nor on bare copper. The surface of copper foil exhibit partial corrosion during the reaction which leads to the creation of active substrate for SEIRA. The measurements were performed using reflection-absorption and attenuated total reflection modes with almost identical results, thus making this analytical approach feasible, practical, non-destructive and easy to use for routine characterization of graphene functionalization.
△ Less
Submitted 19 July, 2021;
originally announced July 2021.
-
Laser-ablation-assisted SF6 decomposition for extensive and controlled fluorination of graphene
Authors:
Jan Plsek,
Karolina Anna Drogowska,
Michaela Fridrichov,
Jana Vejpravova,
Martin Kalbac
Abstract:
We present a safe, clean, convenient, and easy-to-control method for extensive fluorination of graphene using laser-ablation-assisted decomposition of gaseous SF6 molecules.
We present a safe, clean, convenient, and easy-to-control method for extensive fluorination of graphene using laser-ablation-assisted decomposition of gaseous SF6 molecules.
△ Less
Submitted 16 July, 2021;
originally announced July 2021.
-
Optical Near-Field Electron Microscopy
Authors:
Raphaël Marchand,
Radek Šachl,
Martin Kalbáč,
Martin Hof,
Rudolf Tromp,
Mariana Amaro,
Sense J. van der Molen,
Thomas Juffmann
Abstract:
Imaging dynamical processes at interfaces and on the nanoscale is of great importance throughout science and technology. While light-optical imaging techniques often cannot provide the necessary spatial resolution, electron-optical techniques damage the specimen and cause dose-induced artefacts. Here, Optical Near-field Electron Microscopy (ONEM) is proposed, an imaging technique that combines non…
▽ More
Imaging dynamical processes at interfaces and on the nanoscale is of great importance throughout science and technology. While light-optical imaging techniques often cannot provide the necessary spatial resolution, electron-optical techniques damage the specimen and cause dose-induced artefacts. Here, Optical Near-field Electron Microscopy (ONEM) is proposed, an imaging technique that combines non-invasive probing with light, with a high spatial resolution read-out via electron optics. Close to the specimen, the optical near-fields are converted into a spatially varying electron flux using a planar photocathode. The electron flux is imaged using low energy electron microscopy, enabling label-free nanometric resolution without the need to scan a probe across the sample. The specimen is never exposed to damaging electrons.
△ Less
Submitted 25 February, 2021;
originally announced February 2021.
-
Anomalous Freezing of Low Dimensional Water Confined in Graphene Nanowrinkles
Authors:
Tim Verhagen,
Jiri Klimes,
Barbara Pacakova,
Martin Kalbac,
Jana Vejpravova
Abstract:
Various properties of water are affected by confinement as the space-filling of the water molecules is very different from bulk water. In our study, we challenged the creation of a stable system in which water molecules are permanently locked in nanodimensional graphene traps. For that purpose, we developed a technique, nitrocellulose-assisted transfer of graphene grown by chemical vapor depositio…
▽ More
Various properties of water are affected by confinement as the space-filling of the water molecules is very different from bulk water. In our study, we challenged the creation of a stable system in which water molecules are permanently locked in nanodimensional graphene traps. For that purpose, we developed a technique, nitrocellulose-assisted transfer of graphene grown by chemical vapor deposition, which enables capturing of the water molecules below an atomically thin graphene membrane structured into a net of regular wrinkles with a lateral dimension of about 4 nm. After successfully confining water molecules below a graphene monolayer, we employed cryogenic Raman spectroscopy to monitor the phase changes of the confined water as a function of the temperature. In our experiment system, the graphene monolayer structured into a net of fine wrinkles plays a dual role: (i) it enables water confinement and (ii) serves as an extremely sensitive probe for phase transitions involving water via graphene-based spectroscopic monitoring of the underlying water structure. Experimental findings were supported with classical and path integral molecular dynamics simulations carried out on our experimental system.
△ Less
Submitted 5 February, 2021;
originally announced February 2021.
-
Strong Localization Effects in the Photoluminescence of Transition Metal Dichalcogenide Heterobilayers
Authors:
Alvaro Rodriguez,
Martin Kalbac,
Otakar Frank
Abstract:
The emergence of various exciton-related effects in transition metal dichalcogenides (TMDC) and their heterostructures has inspired a significant number of studies and brought forth several possible applications. Often, standard photoluminescence (PL) with microscale lateral resolution is utilized to identify and characterize these excitonic phenomena, including interlayer excitons (IEXs). We stud…
▽ More
The emergence of various exciton-related effects in transition metal dichalcogenides (TMDC) and their heterostructures has inspired a significant number of studies and brought forth several possible applications. Often, standard photoluminescence (PL) with microscale lateral resolution is utilized to identify and characterize these excitonic phenomena, including interlayer excitons (IEXs). We studied the local PL signatures of van der Waals heterobilayers composed of exfoliated monolayers of the (Mo,W)(S,Se)$_2$ TMDC family with high spatial resolution (down to 30 nm) using tip-enhanced photoluminescence (TEPL) with different orders (top/bottom) and on different substrates. We evidence that other PL signals may appear near the reported energy of the IEX transitions, possibly interfering in the interpretation of the results. While we can distinguish and confirm the presence of IEX-related PL in MoS$_2$-WS$_2$ and MoSe$_2$-WSe$_2$, we find no such feature in the MoS$_2$-WSe$_2$ heterobilayer in the spectral region of 1.7-1.4 eV, where the IEXs of this heterobilayer is often reported. We assign the extra signals to the PL of the individual monolayers, in which the exciton energy is altered by the local strains caused by the formation of blisters and nanobubbles, and the PL is extremely enhanced due to the decoupling of the layers. We prove that even a single nanobubble as small as 60 nm---hence not optically visible---can induce such a suspicious PL feature in the micro-PL spectrum of an otherwise flat heterobilayer.
△ Less
Submitted 13 October, 2020;
originally announced October 2020.
-
Coexistence of Van Hove Singularities and Pseudomagnetic Fields in Modulated Graphene Bilayer
Authors:
Jana Vejpravova,
Barbara Pacakova,
Mildred S. Dresselhaus,
Jing Kong,
Martin Kalbac
Abstract:
The stacking and bending of graphene are trivial but extremely powerful agents of control over graphene's manifold physics. By changing the twist angle, one can drive the system over a plethora of exotic states via strong electron correlation, thanks to the moiré superlattice potentials, while the periodic or triaxial strains induce discretization of the band structure into Landau levels without t…
▽ More
The stacking and bending of graphene are trivial but extremely powerful agents of control over graphene's manifold physics. By changing the twist angle, one can drive the system over a plethora of exotic states via strong electron correlation, thanks to the moiré superlattice potentials, while the periodic or triaxial strains induce discretization of the band structure into Landau levels without the need for an external magnetic field. We fabricated a hybrid system comprising both the stacking and bending tuning knobs. We have grown the graphene monolayers by chemical vapor deposition, using $^{12}$C and $^{13}$C precursors, which enabled us to individually address the layers through Raman spectroscopy mapping. We achieved the long-range spatial modulation by sculpturing the top layer ($^{13}$C) over uniform magnetic nanoparticles (NPs) deposited on the bottom layer ($^{12}$C). An atomic force microscopy study revealed that the top layer tends to relax into pyramidal corrugations with C$_3$ axial symmetry at the position of the NPs, which have been widely reported as a source of large pseudomagnetic fields (PMFs) in graphene monolayers. The modulated graphene bilayer (MGBL) also contains a few micrometer large domains, with the twist angle ~ 10$^{\circ}$, which were identified via extreme enhancement of the Raman intensity of the G-mode due to formation of Van Hove singularities (VHSs). We thereby conclude that the twist induced VHSs coexist with the PMFs generated in the strained pyramidal objects without mutual disturbance. The graphene bilayer modulated with magnetic NPs is a non-trivial hybrid system that accommodates features of twist induced VHSs and PMFs in environs of giant classical spins.
△ Less
Submitted 3 November, 2019;
originally announced November 2019.
-
Imaging Nanoscale Inhomogeneities and Edge Delamination in As-Grown MoS2 Using Tip-Enhanced Photoluminescence
Authors:
Alvaro Rodriguez,
Tim Verhagen,
Martin Kalbac,
Jana Vejpravova,
Otakar Frank
Abstract:
Methods for nanoscale material characterization are in ever-increasing demand, especially those that can provide a broader range of information at once. Near-field techniques based on combinations of scanning probe microscopy (SPM) and Raman or photoluminescence (PL) spectroscopy (tip-enhanced Raman spectroscopy [TERS] and/or tip-enhanced photoluminescence [TEPL]) are, thanks to their capabilities…
▽ More
Methods for nanoscale material characterization are in ever-increasing demand, especially those that can provide a broader range of information at once. Near-field techniques based on combinations of scanning probe microscopy (SPM) and Raman or photoluminescence (PL) spectroscopy (tip-enhanced Raman spectroscopy [TERS] and/or tip-enhanced photoluminescence [TEPL]) are, thanks to their capabilities and fast development, strong candidates for becoming widespread across the scientific community as SPM and Raman microscopy did only a decade or two ago. Herein, a gap-less TEPL study is performed directly on as-grown MoS2 monolayer samples without any pretreatment or transfer, i.e., without the utilization of plasmonic substrate. Thanks to a mapping resolution as low as a few tens of nanometers, homogeneous layer interiors from defective edge fronts in the grown monolayers can be distinguished. With the aid of additional high-resolution SPM modes, like local surface potential and capacitance measurements, together with nanomechanical mapping, a combination of defects and a lack of substrate doping is suggested as being responsible for the observed PL behavior in the partially delaminated MoS2 layers. In contrast, mechanically exfoliated flakes show topography- and contamination-related heterogeneities in the whole flake area.
△ Less
Submitted 9 November, 2020; v1 submitted 15 October, 2019;
originally announced October 2019.
-
Raman spectroscopy and In-situ Raman spectroelectrochemistry of isotopically engineered graphene systems
Authors:
Otakar Frank,
Mildred S. Dresselhaus,
Martin Kalbac
Abstract:
The unique properties of graphene offer immense opportunities for applications to many scientific fields, as well as societal needs, beyond our present imagination. One of the important features of graphene is the relatively simple tunability of its electronic structure, an asset which extends the usability of graphene even further beyond present experience. A direct injection of charge carriers i…
▽ More
The unique properties of graphene offer immense opportunities for applications to many scientific fields, as well as societal needs, beyond our present imagination. One of the important features of graphene is the relatively simple tunability of its electronic structure, an asset which extends the usability of graphene even further beyond present experience. A direct injection of charge carriers into the conduction or valence bands, i.e., doping, represents a viable way of shifting the Fermi level. In particular, the electrochemical doping should be the method of choice, when higher doping levels are desired and when a firm control of experimental conditions is needed. In this Account, we focus on the electrochemistry of graphene in combination with in-situ Raman spectroscopy, i.e., the in-situ Raman spectroelectrochemistry. Such a combination of methods is indeed very powerful, since Raman spectroscopy can readily monitor not only the changes in the doping level, but it can give information also on eventual stress or disorder in the material. However, when employing Raman spectroscopy, one of its main strengths lies in the utilization of isotope engineering during the chemical vapor deposition (CVD) growth of the graphene samples. The in-situ Raman spectroelectrochemical study of multi-layered systems with smartly designed isotope compositions in individual layers can provide a plethora of knowledge about the mutual interactions: (i) between the graphene layers themselves, (ii) between graphene layers and their directly adjacent environment (e.g., substrate or electrolyte), and (iii) between graphene layers and their extended environment, which is separated from the layer by a certain number of additional graphene layers.
△ Less
Submitted 25 April, 2018;
originally announced April 2018.
-
Strain Assessment in Graphene Through the Raman 2D' Mode
Authors:
Elena del Corro,
Ladislav Kavan,
Martin Kalbac,
Otakar Frank
Abstract:
Accurate and simple local strain assessment in graphene is one of the crucial tasks in device characterization. Raman spectroscopy is often used for that purpose through monitoring of the G and 2D modes. However, the shifts of those two bands might be biased, especially under uniaxial strain, by the effects of charge-transfer doping. Therefore, it is extremely desirable to use another Raman band,…
▽ More
Accurate and simple local strain assessment in graphene is one of the crucial tasks in device characterization. Raman spectroscopy is often used for that purpose through monitoring of the G and 2D modes. However, the shifts of those two bands might be biased, especially under uniaxial strain, by the effects of charge-transfer doping. Therefore, it is extremely desirable to use another Raman band, less affected by doping, but with a defined and measurable behavior under strain. The Raman 2D' mode is in this sense the ideal feature for the evaluation of strain levels in stretched graphene monolayers, suitable for this task even under different experimental conditions. The sensitivity and accuracy of the approach through 2D' mode is on the same level as through the G mode, however, the clear advantage of the 2D' arises when doping effects are present in the sample.
△ Less
Submitted 25 April, 2018;
originally announced April 2018.
-
Graphene under direct compression: stress effects and interlayer coupling
Authors:
Elena del Corro,
Miriam Pena-Alvarez,
Michal Mracko,
Radek Kolman,
Martin Kalbac,
Ladislav Kavan,
Otakar Frank
Abstract:
In this work we explore mechanical properties of graphene samples of variable thickness. For this purpose, we coupled a high pressure sapphire anvil cell to a micro-Raman spectrometer. From the evolution of the G band frequency with stress we document the importance the substrate has on the mechanical response of graphene. On the other hand, the appearance of disorder as a conse-quence of the stre…
▽ More
In this work we explore mechanical properties of graphene samples of variable thickness. For this purpose, we coupled a high pressure sapphire anvil cell to a micro-Raman spectrometer. From the evolution of the G band frequency with stress we document the importance the substrate has on the mechanical response of graphene. On the other hand, the appearance of disorder as a conse-quence of the stress treatment has a negligible effect on the high stress behaviour of graphene.
△ Less
Submitted 25 April, 2018;
originally announced April 2018.
-
Stress and charge transfer in uniaxially strained CVD graphene
Authors:
Milan Bousa,
George Anagnostopoulos,
Elena del Corro,
Karolina Drogowska,
Jan Pekarek,
Ladislav Kavan,
Martin Kalbac,
John Parthenios,
Konstantinos Papagelis,
Costas Galiotis,
Otakar Frank
Abstract:
Mechanical properties of graphene prepared by chemical vapor deposition (CVD) are not easily comparable to the properties of nearly perfect graphene prepared by mechanical cleavage. In this work, we attempt to investigate the mechanical performance of CVD graphene (simply supported or embedded in polymer matrix), transferred by two different techniques, under uniaxial loading with simultaneous in-…
▽ More
Mechanical properties of graphene prepared by chemical vapor deposition (CVD) are not easily comparable to the properties of nearly perfect graphene prepared by mechanical cleavage. In this work, we attempt to investigate the mechanical performance of CVD graphene (simply supported or embedded in polymer matrix), transferred by two different techniques, under uniaxial loading with simultaneous in-situ monitoring by Raman microspectroscopy. The level of charge transfer doping and strain is assessed using the vector analysis modified for uniaxial strain. The strain distribution across the samples varies significantly, owing to the growth and transfer process, which induces wrinkles and faults in the CVD graphene. In simply supported specimens, the stress transfer efficiency is generally very low and the changes in Raman spectra are dominated by variations in the charge transfer originating from the realignment of the domains on the substrate upon the application of strain. In contrast, samples covered with an additional polymer layer exhibit an improved stress transfer efficiency, and the alterations of charge doping levels are negligible. In fully embedded specimens, the variations in stress transfer efficiencies are caused by the size of the effective graphene domains defined by cracks, folds and or/wrinkles.
△ Less
Submitted 17 January, 2018;
originally announced January 2018.
-
Evaluating arbitrary strain configurations and doping in graphene with Raman spectroscopy
Authors:
Niclas S. Mueller,
Sebastian Heeg,
Miriam Peña Alvarez,
Patryk Kusch,
Sören Wasserroth,
Nick Clark,
Fred Schedin,
John Parthenios,
Konstantinos Papagelis,
Costas Galiotis,
Martin Kalbáč,
Aravind Vijayaraghavan,
Uwe Huebner,
Roman Gorbachev,
Otakar Frank,
Stephanie Reich
Abstract:
Raman spectroscopy is a powerful tool for characterizing the local properties of graphene. Here, we introduce a method for evaluating unknown strain configurations and simultaneous doping. It relies on separating the effects of hydrostatic strain (peak shift) and shear strain (peak splitting) on the Raman spectrum of graphene. The peak shifts from hydrostatic strain and doping are separated with a…
▽ More
Raman spectroscopy is a powerful tool for characterizing the local properties of graphene. Here, we introduce a method for evaluating unknown strain configurations and simultaneous doping. It relies on separating the effects of hydrostatic strain (peak shift) and shear strain (peak splitting) on the Raman spectrum of graphene. The peak shifts from hydrostatic strain and doping are separated with a correlation analysis of the 2D and G frequencies. This enables us to obtain the local hydrostatic strain, shear strain and doping without any assumption on the strain configuration prior to the analysis. We demonstrate our approach for two model cases: Graphene under uniaxial stress on a PMMA substrate and graphene suspended on nanostructures that induce an unknown strain configuration. We measured $ω_\mathrm{2D}/ω_\mathrm{G} = 2.21 \pm 0.05$ for pure hydrostatic strain. Raman scattering with circular corotating polarization is ideal for analyzing strain and doping, especially for weak strain when the peak splitting by shear strain cannot be resolved.
△ Less
Submitted 7 April, 2017; v1 submitted 28 March, 2017;
originally announced March 2017.
-
Fine Tuning of Optical Transition Energy of Twisted Bilayer Graphene via Interlayer Distance Modulation
Authors:
Elena del Corro,
Miriam Peña-Alvarez,
Kentaro Sato,
Angel Morales-Garcia,
Milan Bousa,
Michal Mračko,
Radek Kolman,
Barbara Pacakova,
Ladislav Kavan,
Martin Kalbac,
Otakar Frank
Abstract:
Twisted bilayer graphene (tBLG) represents a family of unique materials with optoelectronic properties tuned by the rotation angle between the two layers. The presented work shows an additional way of tweaking the electronic structure of tBLG: by modifying the interlayer distance, for example by a small uniaxial out-of-plane compression. We have focused on the optical transition energy, which show…
▽ More
Twisted bilayer graphene (tBLG) represents a family of unique materials with optoelectronic properties tuned by the rotation angle between the two layers. The presented work shows an additional way of tweaking the electronic structure of tBLG: by modifying the interlayer distance, for example by a small uniaxial out-of-plane compression. We have focused on the optical transition energy, which shows a clear dependence on the interlayer distance, both experimentally and theoretically.
△ Less
Submitted 1 February, 2017;
originally announced February 2017.
-
Graphene wrinkling induced by monodisperse nanoparticles: facile control and quantification
Authors:
Jana Vejpravova,
Barbara Pacakova,
Jan Endres,
Alice Mantlikova,
Tim Verhagen,
Vaclav Vales,
Otakar Frank,
Martin Kalbac
Abstract:
Controlled wrinkling of single-layer graphene (1-LG) at nanometer scale was achieved by introducing monodisperse nanoparticles (NPs), with size comparable to the strain coherence length, underneath the 1-LG. Typical fingerprint of the delaminated fraction of 1-LG is identified as substantial contribution to the principal Raman modes of the 1-LG. Correlation analysis of the Raman shift of the modes…
▽ More
Controlled wrinkling of single-layer graphene (1-LG) at nanometer scale was achieved by introducing monodisperse nanoparticles (NPs), with size comparable to the strain coherence length, underneath the 1-LG. Typical fingerprint of the delaminated fraction of 1-LG is identified as substantial contribution to the principal Raman modes of the 1-LG. Correlation analysis of the Raman shift of the modes clearly resolved the 1-LG in contact and delaminated from the substrate, respectively. Intensity of Raman features of the delaminated 1-LG increases linearly with the amount of the wrinkles, determined by advanced processing of atomic force microscopy data. Our study thus offers universal approach for both fine tuning and facile quantification of the graphene topography up to ~ 60% of wrinkling.
△ Less
Submitted 21 April, 2015;
originally announced April 2015.
-
Formation of wrinkles on graphene induced by nanoparticles: atomic force microscopy study
Authors:
Barbara Pacakova,
Jana Vejpravova,
Anton Repko,
Alice Mantlikova,
Martin Kalbac
Abstract:
Wrinkles in monolayer graphene (GN) affect the GN electronic and transport properties. Defined network of wrinkles can be reached by placing the GN on the substrate decorated with the nanoparticles (NPs). In order to explain mechanism behind the topographically induced changes of the GN electronic structure and to correlate it with the wrinkling, correct description of the GN morphology is of high…
▽ More
Wrinkles in monolayer graphene (GN) affect the GN electronic and transport properties. Defined network of wrinkles can be reached by placing the GN on the substrate decorated with the nanoparticles (NPs). In order to explain mechanism behind the topographically induced changes of the GN electronic structure and to correlate it with the wrinkling, correct description of the GN morphology is of high demand. We demonstrate here how to determine from the atomic force microscopy (AFM) images whether the GN is in the contact with the substrate or it is delaminated, how is the wrinkling of the layer connected with the density of the NPs and if there is the preferential orientation of wrinkles. Also the relevance of detection of the NPs hidden beneath the GN layer is discussed. The study was done on nine samples of the GN on the top of Si-SiO2 substrate, decorated with the metal-oxide NPs of nominal diameter 6 and 10 nm. NP density varied in a range of 20 up to 470 NPs per um2. The projected area of wrinkles was increasing linearly with the increasing NP density, independently on the NP size.
△ Less
Submitted 11 May, 2015; v1 submitted 27 March, 2015;
originally announced March 2015.
-
Heating Isotopically Labelled Bernal Stacked Graphene: a Raman Spectroscopy Study
Authors:
Johan Ek Weis,
Sara Costa,
Otakar Frank,
Martin Kalbac
Abstract:
One of the greatest issues of nanoelectronics today is how to control the heating of the components. Graphene is a promising material in this area and it is essential to study its thermal properties. Here, the effect of heating a bilayer structure was investigated using in situ Raman spectroscopy. In order to observe the effects on each individual layer, an isotopically labelled bilayer graphene w…
▽ More
One of the greatest issues of nanoelectronics today is how to control the heating of the components. Graphene is a promising material in this area and it is essential to study its thermal properties. Here, the effect of heating a bilayer structure was investigated using in situ Raman spectroscopy. In order to observe the effects on each individual layer, an isotopically labelled bilayer graphene was synthesized where the two layers are composed of different carbon isotopes. Therefore, the frequency of the phonons in the Raman spectra is shifted in relation to each other. This technique was used to investigate the influence of different stacking order. It was found that in bilayer graphene grown by chemical vapor deposition (CVD) the two layers behave very similarly, for both Bernal stacking and randomly oriented structures, while for transferred samples the layers act more independently. This highlights a significant dependence on sample preparation procedure.
△ Less
Submitted 12 February, 2014;
originally announced February 2014.
-
Interaction between graphene and copper substrate: The role of lattice orientation
Authors:
Otakar Frank,
Jana Vejpravova,
Vaclav Holy,
Ladislav Kavan,
Martin Kalbac
Abstract:
We present a comprehensive study of graphene grown by chemical vapor deposition on copper single crystals with exposed (100), (110) and (111) faces. Direct examination of the as-grown graphene by Raman spectroscopy using a range of visible excitation energies and microRaman mapping shows distinct strain and doping levels for individual Cu surfaces. Comparison of results from Raman mapping with X-r…
▽ More
We present a comprehensive study of graphene grown by chemical vapor deposition on copper single crystals with exposed (100), (110) and (111) faces. Direct examination of the as-grown graphene by Raman spectroscopy using a range of visible excitation energies and microRaman mapping shows distinct strain and doping levels for individual Cu surfaces. Comparison of results from Raman mapping with X-ray diffraction techniques and Atomic Force Microscopy shows it is neither the crystal quality nor the surface topography responsible for the specific strain and doping values, but it is the Cu lattice orientation itself. We also report an exceptionally narrow Raman 2D band width caused by the interaction between graphene and metallic substrate. The appearance of this extremely narrow 2D band with full-width-at-half maximum (FWHM) as low as 16 cm-1 is correlated with flat and undoped regions on the Cu(100) and (110) surfaces. The generally compressed (~ 0.3% of strain) and n-doped (Fermi level shift of ~250 meV) graphene on Cu(111) shows the 2D band FWHM minimum of ~20 cm-1. In contrast, graphene grown on Cu foil under the same conditions reflects the heterogeneity of the polycrystalline surface and its 2D band is accordingly broader with FWHM > 24 cm-1.
△ Less
Submitted 31 January, 2014;
originally announced January 2014.
-
Raman spectroscopy of graphene at high pressure: substrate and pressure transmitting media effects
Authors:
K. Filintoglou,
N. Papadopoulos,
J. Arvanitidis,
D. Christofilos,
O. Frank,
M. Kalbac,
J. Parthenios,
G. Kalosakas,
C. Galiotis,
K. Papagelis
Abstract:
The pressure evolution of the Raman spectrum of graphene grown by chemical vapour deposition on polycrystalline copper is investigated with the use of a polar and a non-polar pressure transmitting medium (PTM). The G and 2D Raman bands exhibit similar pressure slopes for both PTM irrespectively of any unintentional initial doping and/or strain of the samples. Our analysis suggests that any pressur…
▽ More
The pressure evolution of the Raman spectrum of graphene grown by chemical vapour deposition on polycrystalline copper is investigated with the use of a polar and a non-polar pressure transmitting medium (PTM). The G and 2D Raman bands exhibit similar pressure slopes for both PTM irrespectively of any unintentional initial doping and/or strain of the samples. Our analysis suggests that any pressure-induced charge transfer effects are negligibly small to influence the pressure response of graphene. This is determined by the mechanical stress due to the pressure-induced substrate contraction and the transfer efficiency of the latter to the graphene layer, as well as the PTM-graphene interaction. For the non-polar PTM, a peculiar pressure behavior of graphene is observed in the PTM solidification regime, resembling that of free standing graphene.
△ Less
Submitted 30 April, 2013;
originally announced April 2013.
-
The control of graphene double-layer formation in copper-catalyzed chemical vapor deposition
Authors:
Martin Kalbac,
Otakar Frank,
Ladislav Kavan
Abstract:
The growth of graphene during Cu-catalyzed chemical vapor deposition was studied using 12CH4 and 13CH4 precursor gasses. We suggest that the growth begins by the formation of a multilayer cluster. This seed increases its size but the growth speed of a particular layer depends on its proximity to the copper surface. The layer closest to the substrate grows fastest and thus further limits the growth…
▽ More
The growth of graphene during Cu-catalyzed chemical vapor deposition was studied using 12CH4 and 13CH4 precursor gasses. We suggest that the growth begins by the formation of a multilayer cluster. This seed increases its size but the growth speed of a particular layer depends on its proximity to the copper surface. The layer closest to the substrate grows fastest and thus further limits the growth rate of the upper layers. Nevertheless, the growth of the upper layers continues until the copper surface is completely blocked. It is shown that the upper layers can be removed by modification of the conditions of the growth by hydrogen etching.
△ Less
Submitted 28 August, 2012;
originally announced August 2012.
-
Observation of Electronic Raman Scattering in Metallic Carbon Nanotubes
Authors:
Hootan Farhat,
Stéphane berciaud,
Martin Kalbac,
Riichiro Saito,
Tony F. Heinz,
Mildred S. Dresselhaus,
Jing Kong
Abstract:
We present experimental measurements of the electronic contribution to the Raman spectra of individual metallic single-walled carbon nanotubes (MSWNTs). Photoexcited carriers are inelastically scattered by a continuum of low-energy electron-hole pairs created across the graphenelike linear electronic subbands of the MSWNTs. The optical resonances in MSWNTs give rise to well-defined electronic Rama…
▽ More
We present experimental measurements of the electronic contribution to the Raman spectra of individual metallic single-walled carbon nanotubes (MSWNTs). Photoexcited carriers are inelastically scattered by a continuum of low-energy electron-hole pairs created across the graphenelike linear electronic subbands of the MSWNTs. The optical resonances in MSWNTs give rise to well-defined electronic Raman peaks. This resonant electronic Raman scattering is a unique feature of the electronic structure of these one-dimensional quasimetals.
△ Less
Submitted 19 October, 2011;
originally announced October 2011.