-
MoEDAL search in the CMS beam pipe for magnetic monopoles produced via the Schwinger effect
Authors:
B. Acharya,
J. Alexandre,
S. C. Behera,
P. Benes,
B. Bergmann,
S. Bertolucci,
A. Bevan,
R. Brancaccio,
H. Branzas,
P. Burian,
M. Campbell,
S. Cecchini,
Y. M. Cho,
M. de Montigny,
A. De Roeck,
J. R. Ellis,
M. Fairbairn,
D. Felea,
M. Frank,
O. Gould,
J. Hays,
A. M. Hirt,
D. L. -J. Ho,
P. Q. Hung,
J. Janecek
, et al. (42 additional authors not shown)
Abstract:
We report on a search for magnetic monopoles (MMs) produced in ultraperipheral Pb--Pb collisions during Run-1 of the LHC. The beam pipe surrounding the interaction region of the CMS experiment was exposed to 184.07 \textmu b$^{-1}$ of Pb--Pb collisions at 2.76 TeV center-of-mass energy per collision in December 2011, before being removed in 2013. It was scanned by the MoEDAL experiment using a SQU…
▽ More
We report on a search for magnetic monopoles (MMs) produced in ultraperipheral Pb--Pb collisions during Run-1 of the LHC. The beam pipe surrounding the interaction region of the CMS experiment was exposed to 184.07 \textmu b$^{-1}$ of Pb--Pb collisions at 2.76 TeV center-of-mass energy per collision in December 2011, before being removed in 2013. It was scanned by the MoEDAL experiment using a SQUID magnetometer to search for trapped MMs. No MM signal was observed. The two distinctive features of this search are the use of a trapping volume very close to the collision point and ultra-high magnetic fields generated during the heavy-ion run that could produce MMs via the Schwinger effect. These two advantages allowed setting the first reliable, world-leading mass limits on MMs with high magnetic charge. In particular, the established limits are the strongest available in the range between 2 and 45 Dirac units, excluding MMs with masses of up to 80 GeV at 95\% confidence level.
△ Less
Submitted 25 July, 2024; v1 submitted 23 February, 2024;
originally announced February 2024.
-
Terrestrial Very-Long-Baseline Atom Interferometry: Workshop Summary
Authors:
Sven Abend,
Baptiste Allard,
Iván Alonso,
John Antoniadis,
Henrique Araujo,
Gianluigi Arduini,
Aidan Arnold,
Tobias Aßmann,
Nadja Augst,
Leonardo Badurina,
Antun Balaz,
Hannah Banks,
Michele Barone,
Michele Barsanti,
Angelo Bassi,
Baptiste Battelier,
Charles Baynham,
Beaufils Quentin,
Aleksandar Belic,
Ankit Beniwal,
Jose Bernabeu,
Francesco Bertinelli,
Andrea Bertoldi,
Ikbal Ahamed Biswas,
Diego Blas
, et al. (228 additional authors not shown)
Abstract:
This document presents a summary of the 2023 Terrestrial Very-Long-Baseline Atom Interferometry Workshop hosted by CERN. The workshop brought together experts from around the world to discuss the exciting developments in large-scale atom interferometer (AI) prototypes and their potential for detecting ultralight dark matter and gravitational waves. The primary objective of the workshop was to lay…
▽ More
This document presents a summary of the 2023 Terrestrial Very-Long-Baseline Atom Interferometry Workshop hosted by CERN. The workshop brought together experts from around the world to discuss the exciting developments in large-scale atom interferometer (AI) prototypes and their potential for detecting ultralight dark matter and gravitational waves. The primary objective of the workshop was to lay the groundwork for an international TVLBAI proto-collaboration. This collaboration aims to unite researchers from different institutions to strategize and secure funding for terrestrial large-scale AI projects. The ultimate goal is to create a roadmap detailing the design and technology choices for one or more km-scale detectors, which will be operational in the mid-2030s. The key sections of this report present the physics case and technical challenges, together with a comprehensive overview of the discussions at the workshop together with the main conclusions.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Linear, Quasi-Linear and Nonlinear Radial Transport in the Earth's Radiation Belts
Authors:
Adnane Osmane,
Emilia Kilpua,
Harriet George,
Oliver Allanson,
Milla Kalliokoski
Abstract:
Observational studies of the Earth's radiation belts indicate that Alfvénic fluctuations in the frequency range of 2-25 mHz accelerate magnetically trapped electrons to relativistic energies. For decades, statistical models of the Earth's radiation belts have quantified the impact of Alfvénic waves in terms of quasi-linear diffusive models. However, quasi-linear models are inadequate to quantify A…
▽ More
Observational studies of the Earth's radiation belts indicate that Alfvénic fluctuations in the frequency range of 2-25 mHz accelerate magnetically trapped electrons to relativistic energies. For decades, statistical models of the Earth's radiation belts have quantified the impact of Alfvénic waves in terms of quasi-linear diffusive models. However, quasi-linear models are inadequate to quantify Alfvénic radial transport occurring on timescales comparable to the azimuthal drift period of $0.1- 10$ MeV electrons. With recent advances in observational methodologies offering spatial and temporal coverage of the Earth's radiation belts on fast timescales, a theoretical framework that distinguishes between fast and diffusive radial transport can also be tested for the first time with in situ measurements. In this report, we present a drift kinetic description of radial transport for planetary radiation belts. We characterize linear processes that are too fast to be modelled by quasi-linear models and determine the conditions under which nonlinearities become dynamically significant. In the linear regime, wave-particle interactions are categorized in terms of resonant and non-resonant responses. We demonstrate that the phenomenon of zebra stripes is non-resonant and can originate from the injection of particles in the inner radiation belts. We derive a radial diffusion coefficient for a field model that satisfies Faraday's law and that contains two terms: one scaling as $L^{10}$ independent of the azimuthal number $m$, and a second one scaling as $m^2 L^6$. In the nonlinear regime, we show that azimuthally symmetric waves with properties consistent with in situ measurements can energize 10-100 keV electrons in less than a drift period. This coherent process provides new evidence that acceleration by Alfvénic waves in radiation belts cannot be fully contained within diffusive models.
△ Less
Submitted 7 April, 2023; v1 submitted 6 April, 2023;
originally announced April 2023.
-
Quality assessment of Cadmium Telluride as a detector material for multispectral medical imaging
Authors:
S. Kirschenmann,
M. Bezak,
S. Bharthuar,
E. Brücken,
M. Golovleva,
A. Gädda,
M. Kalliokoski,
A. Karadzhinova-Ferrer,
P. Koponen,
N. Kramarenko,
P. Luukka,
J. Ott,
J. Tikkanen,
R. Turpeinen,
A. Winkler
Abstract:
Cadmium Telluride (CdTe) is a high-Z material with excellent photon radiation absorption properties, making it a promising material to include in radiation detection technologies. However, the brittleness of CdTe crystals as well as their varying concentration of defects necessitate a thorough quality assessment before the complex detector processing procedure. We present our quality assessment of…
▽ More
Cadmium Telluride (CdTe) is a high-Z material with excellent photon radiation absorption properties, making it a promising material to include in radiation detection technologies. However, the brittleness of CdTe crystals as well as their varying concentration of defects necessitate a thorough quality assessment before the complex detector processing procedure. We present our quality assessment of CdTe as a detector material for multispectral medical imaging, a research which is conducted as part of the Consortium Project Multispectral Photon-counting for Medical Imaging and Beam characterization (MPMIB). The aim of the project is to develop novel CdTe detectors and obtain spectrum-per-pixel information that make the distinction between different radiation types and tissues possible. To evaluate the defect density inside the crystals -- which can deteriorate the detector performance -- we employ infrared microscopy (IRM). Posterior data analysis allows us to visualise the defect distributions as 3D defect maps. Additionally, we investigate front and backside differences of the material with current-voltage (IV) measurements to determine the preferred surface for the pixelisation of the crystal, and perform test measurements with the prototypes to provide feedback for further processing. We present the different parts of our quality assessment chain and will close with first experimental results obtained with one of our prototype PC detectors in a small tomographic setup.
△ Less
Submitted 26 January, 2022;
originally announced January 2022.
-
Search for Highly-Ionizing Particles in pp Collisions at the LHC's Run-1 Using the Prototype MoEDAL Detector
Authors:
B. Acharya,
J. Alexandre,
P. Benes,
B. Bergmann,
S. Bertolucci,
A. Bevan,
R. Bhattacharya,
H. Branzas,
P. Burian,
M. Campbell,
S. Cecchini,
Y. M. Cho,
M. de Montigny,
A. De Roeck,
J. R. Ellis,
M. El Sawy,
M. Fairbairn,
D. Felea,
M. Frank,
J. Hays,
A. M. Hirt,
P. Q. Hung,
J. Janecek,
M. Kalliokoski,
A. Korzenev
, et al. (46 additional authors not shown)
Abstract:
A search for highly electrically charged objects (HECOs) and magnetic monopoles is presented using 2.2 fb-1 of p - p collision data taken at a centre of mass energy (ECM) of 8 TeV by the MoEDAL detector during LHC's Run-1. The data were collected using MoEDAL's prototype Nuclear Track Detector array and the Trapping Detector array. The results are interpreted in terms of Drell-Yan pair production…
▽ More
A search for highly electrically charged objects (HECOs) and magnetic monopoles is presented using 2.2 fb-1 of p - p collision data taken at a centre of mass energy (ECM) of 8 TeV by the MoEDAL detector during LHC's Run-1. The data were collected using MoEDAL's prototype Nuclear Track Detector array and the Trapping Detector array. The results are interpreted in terms of Drell-Yan pair production of stable HECO and monopole pairs with three spin hypotheses (0, 1/2 and 1). The search provides constraints on the direct production of magnetic monopoles carrying one to four Dirac magnetic charges (4gD) and with mass limits ranging from 590 GeV/c^2 to 1 TeV/c^2. Additionally, mass limits are placed on HECOs with charge in the range 10e to 180e, where e is the charge of an electron, for masses between 30 GeV/c^2 and 1 TeV/c^2.
△ Less
Submitted 23 June, 2022; v1 submitted 10 December, 2021;
originally announced December 2021.
-
Employing infrared microscopy (IRM) in combination with a pre-trained neural network to visualise and analyse the defect distribution in Cadmium Telluride crystals
Authors:
S. Kirschenmann,
S. Bharthuar,
E. Brücken,
M. Golovleva,
A. Gädda,
M. Kalliokoski,
P. Luukka,
J. Ott,
A. Winkler
Abstract:
While Cadmium Telluride (CdTe) excels in terms of photon radiation absorption properties and outperforms silicon (Si) in this respect, the crystal growth, characterization and processing into a radiation detector is much more complicated. Additionally, large concentrations of extended crystallographic defects, such as grain boundaries, twins, and tellurium (Te) inclusions, vary from crystal to cry…
▽ More
While Cadmium Telluride (CdTe) excels in terms of photon radiation absorption properties and outperforms silicon (Si) in this respect, the crystal growth, characterization and processing into a radiation detector is much more complicated. Additionally, large concentrations of extended crystallographic defects, such as grain boundaries, twins, and tellurium (Te) inclusions, vary from crystal to crystal and can reduce the spectroscopic performance of the processed detector. A quality assessment of the material prior to the complex fabrication process is therefore crucial. To locate the Te-defects, we scan the crystals with infrared microscopy (IRM) in different layers, obtaining a 3D view of the defect distribution. This provides us with important information on the defect density and locations of Te inclusions, and thus a handle to assess the quality of the material. For the classification of defects in the large amount of IRM image data, a convolutional neural network is employed. From the post-processed and analysed IRM data, 3D defect maps of the CdTe crystals are created, which make different patterns of defect agglomerations inside the crystals visible. In total, more than 100 crystals were scanned with the current IRM setup. In this paper, we compare two crystal batches, each consisting of 12 samples. We find significant differences in the defect distributions of the crystals.
△ Less
Submitted 18 August, 2021;
originally announced August 2021.
-
First experimental search for production of magnetic monopoles via the Schwinger mechanism
Authors:
B. Acharya,
J. Alexandre,
P. Benes,
B. Bergmann,
S. Bertolucci,
A. Bevan,
H. Branzas,
P. Burian,
M. Campbell,
Y. M. Cho,
M. de Montigny,
A. De Roeck,
J. R. Ellis,
M. El Sawy,
M. Fairbairn,
D. Felea,
M. Frank,
O. Gould,
J. Hays,
A. M. Hirt,
D. L. J. Ho,
P. Q. Hung,
J. Janecek,
M. Kalliokoski,
A. Korzenev
, et al. (42 additional authors not shown)
Abstract:
Schwinger showed that electrically-charged particles can be produced in a strong electric field by quantum tunnelling through the Coulomb barrier. By electromagnetic duality, if magnetic monopoles (MMs) exist, they would be produced by the same mechanism in a sufficiently strong magnetic field. Unique advantages of the Schwinger mechanism are that its rate can be calculated using semiclassical tec…
▽ More
Schwinger showed that electrically-charged particles can be produced in a strong electric field by quantum tunnelling through the Coulomb barrier. By electromagnetic duality, if magnetic monopoles (MMs) exist, they would be produced by the same mechanism in a sufficiently strong magnetic field. Unique advantages of the Schwinger mechanism are that its rate can be calculated using semiclassical techniques without relying on perturbation theory, and the finite MM size and strong MM-photon coupling are expected to enhance their production. Pb-Pb heavy-ion collisions at the LHC produce the strongest known magnetic fields in the current Universe, and this article presents the first search for MM production by the Schwinger mechanism. It was conducted by the MoEDAL experiment during the 5.02 TeV/nucleon heavy-ion run at the LHC in November 2018, during which the MoEDAL trapping detectors (MMTs) were exposed to 0.235 nb$^{-1}$ of Pb-Pb collisions. The MMTs were scanned for the presence of magnetic charge using a SQUID magnetometer. MMs with Dirac charges 1$g_D$ $\leq$ $g$ $\leq$ 3$g_D$ and masses up to 75 GeV/c$^2$ were excluded by the analysis. This provides the first lower mass limit for finite-size MMs from a collider search and significantly extends previous mass bounds.
△ Less
Submitted 23 January, 2022; v1 submitted 22 June, 2021;
originally announced June 2021.
-
Hole Misalignment and Gain Performance of Gaseous Electron Multipliers
Authors:
Erik Brücken,
Jouni Heino,
Timo Hildén,
Matti Kalliokoski,
Vladyslav Litichevskyi,
Raimo Turpeinen,
Dezső Varga
Abstract:
It is well known and has been shown that the gain performance of Gaseous Electron Multipliers (GEM) depends on the size of the holes. With an optical scanner it is possible to measure the dimensions of the holes, and to predict the performance of GEMs. However, the gain prediction of GEMs that are manufactured with a double mask etching technique is not straightforward. With the hole size informat…
▽ More
It is well known and has been shown that the gain performance of Gaseous Electron Multipliers (GEM) depends on the size of the holes. With an optical scanner it is possible to measure the dimensions of the holes, and to predict the performance of GEMs. However, the gain prediction of GEMs that are manufactured with a double mask etching technique is not straightforward. With the hole size information alone, it is not possible to make precise prediction of the gain. We show that the alignment of the photo-masks between the two sides of the GEM foils plays a crucial role. A misalignment of a few microns can lower the gain substantially. The study is performed by using the Helsinki high definition optical scanner for quality control of GEM foils, and this will show its true potential.
△ Less
Submitted 14 March, 2021;
originally announced March 2021.
-
First search for dyons with the full MoEDAL trapping detector in 13 TeV pp collisions
Authors:
B. Acharya,
J. Alexandre,
P. Benes,
B. Bergmann,
J. Bernabeu,
A. Bevan,
H. Branzas,
P. Burian,
M. Campbell,
S. Cecchini,
Y. M. Cho,
M. de Montigny,
A. De Roeck,
J. R. Ellis,
M. El Sawy,
M. Fairbairn,
D. Felea,
M. Frank,
J. Hays,
A. M. Hirt,
J. Janecek,
M. Kalliokoski,
A. Korzenev,
D. H. Lacarrere,
C. Leroy
, et al. (44 additional authors not shown)
Abstract:
The MoEDAL trapping detector, consists of approximately 800 kg of aluminium volumes. It was exposed during Run-2 of the LHC program to 6.46 fb^-1 of 13 TeV proton-proton collisions at the LHCb interaction point. Evidence for dyons (particles with electric and magnetic charge) captured in the trapping detector was sought by passing the aluminium volumes comprising the detector through a SQUID magne…
▽ More
The MoEDAL trapping detector, consists of approximately 800 kg of aluminium volumes. It was exposed during Run-2 of the LHC program to 6.46 fb^-1 of 13 TeV proton-proton collisions at the LHCb interaction point. Evidence for dyons (particles with electric and magnetic charge) captured in the trapping detector was sought by passing the aluminium volumes comprising the detector through a SQUID magnetometer. The presence of a trapped dyon would be signalled by a persistent current induced in the SQUID magnetometer. On the basis of a Drell-Yan production model, we exclude dyons with a magnetic charge ranging up to 5 Dirac charges, and an electric charge up to 200 times the fundamental electric charge for mass limits in the range 790 - 3130 GeV.
△ Less
Submitted 2 August, 2021; v1 submitted 30 January, 2020;
originally announced February 2020.
-
FORESAIL-1 cubesat mission to measure radiation belt losses and demonstrate de-orbiting
Authors:
FORESAIL collaboration,
M. Palmroth,
J. Praks,
R. Vainio,
P. Janhunen,
E. K. J. Kilpua,
N. Yu. Ganushkina,
A. Afanasiev,
M. Ala-Lahti,
A. Alho,
T. Asikainen,
E. Asvestari,
M. Battarbee,
A. Binios,
A. Bosser,
T. Brito,
J. Envall,
U. Ganse,
H. George,
J. Gieseler,
S. Good,
M. Grandin,
S. Haslam,
H. -P. Hedman,
H. Hietala
, et al. (35 additional authors not shown)
Abstract:
Today, the near-Earth space is facing a paradigm change as the number of new spacecraft is literally sky-rocketing. Increasing numbers of small satellites threaten the sustainable use of space, as without removal, space debris will eventually make certain critical orbits unusable. A central factor affecting small spacecraft health and leading to debris is the radiation environment, which is unpred…
▽ More
Today, the near-Earth space is facing a paradigm change as the number of new spacecraft is literally sky-rocketing. Increasing numbers of small satellites threaten the sustainable use of space, as without removal, space debris will eventually make certain critical orbits unusable. A central factor affecting small spacecraft health and leading to debris is the radiation environment, which is unpredictable due to an incomplete understanding of the near-Earth radiation environment itself and its variability driven by the solar wind and outer magnetosphere. This paper presents the FORESAIL-1 nanosatellite mission, having two scientific and one technological objectives. The first scientific objective is to measure the energy and flux of energetic particle loss to the atmosphere with a representative energy and pitch angle resolution over a wide range of magnetic local times. To pave the way to novel model - in situ data comparisons, we also show preliminary results on precipitating electron fluxes obtained with the new global hybrid-Vlasov simulation Vlasiator. The second scientific objective of the FORESAIL-1 mission is to measure energetic neutral atoms (ENAs) of solar origin. The solar ENA flux has the potential to contribute importantly to the knowledge of solar eruption energy budget estimations. The technological objective is to demonstrate a satellite de-orbiting technology, and for the first time, make an orbit manoeuvre with a propellantless nanosatellite. FORESAIL-1 will demonstrate the potential for nanosatellites to make important scientific contributions as well as promote the sustainable utilisation of space by using a cost-efficient de-orbiting technology.
△ Less
Submitted 23 May, 2019;
originally announced May 2019.
-
Optical quality assurance of GEM foils
Authors:
T. Hildén,
E. Brücken,
J. Heino,
M. Kalliokoski,
A. Karadzhinova,
R. Lauhakangas,
E. Tuominen,
R. Turpeinen
Abstract:
An analysis software was developed for the high aspect ratio optical scanning system in the Detec- tor Laboratory of the University of Helsinki and the Helsinki Institute of Physics. The system is used e.g. in the quality assurance of the GEM-TPC detectors being developed for the beam diagnostics system of the SuperFRS at future FAIR facility. The software was tested by analyzing five CERN standar…
▽ More
An analysis software was developed for the high aspect ratio optical scanning system in the Detec- tor Laboratory of the University of Helsinki and the Helsinki Institute of Physics. The system is used e.g. in the quality assurance of the GEM-TPC detectors being developed for the beam diagnostics system of the SuperFRS at future FAIR facility. The software was tested by analyzing five CERN standard GEM foils scanned with the optical scanning system. The measurement uncertainty of the diameter of the GEM holes and the pitch of the hole pattern was found to be 0.5 μm and 0.3 μm, respectively. The software design and the performance are discussed. The correlation between the GEM hole size distribution and the corresponding gain variation was studied by comparing them against a detailed gain mapping of a foil and a set of six lower precision control measurements. It can be seen that a qualitative estimation of the behavior of the local variation in gain across the GEM foil can be made based on the measured sizes of the outer and inner holes.
△ Less
Submitted 21 April, 2017;
originally announced April 2017.
-
Search for magnetic monopoles with the MoEDAL forward trapping detector in 13 TeV proton-proton collisions at the LHC
Authors:
MoEDAL Collaboration,
B. Acharya,
J. Alexandre,
S. Baines,
P. Benes,
B. Bergmann,
J. Bernabéu,
H. Branzas,
M. Campbell,
L. Caramete,
S. Cecchini,
M. de Montigny,
A. De Roeck,
J. R. Ellis,
M. Fairbairn,
D. Felea,
J. Flores,
M. Frank,
D. Frekers,
C. Garcia,
A. M. Hirt,
J. Janecek,
M. Kalliokoski,
A. Katre,
D. -W. Kim
, et al. (46 additional authors not shown)
Abstract:
MoEDAL is designed to identify new physics in the form of long-lived highly-ionising particles produced in high-energy LHC collisions. Its arrays of plastic nuclear-track detectors and aluminium trapping volumes provide two independent passive detection techniques. We present here the results of a first search for magnetic monopole production in 13 TeV proton-proton collisions using the trapping t…
▽ More
MoEDAL is designed to identify new physics in the form of long-lived highly-ionising particles produced in high-energy LHC collisions. Its arrays of plastic nuclear-track detectors and aluminium trapping volumes provide two independent passive detection techniques. We present here the results of a first search for magnetic monopole production in 13 TeV proton-proton collisions using the trapping technique, extending a previous publication with 8 TeV data during LHC run-1. A total of 222 kg of MoEDAL trapping detector samples was exposed in the forward region and analysed by searching for induced persistent currents after passage through a superconducting magnetometer. Magnetic charges exceeding half the Dirac charge are excluded in all samples and limits are placed for the first time on the production of magnetic monopoles in 13 TeV $pp$ collisions. The search probes mass ranges previously inaccessible to collider experiments for up to five times the Dirac charge.
△ Less
Submitted 12 January, 2017; v1 submitted 21 November, 2016;
originally announced November 2016.
-
Search for magnetic monopoles with the MoEDAL prototype trapping detector in 8 TeV proton-proton collisions at the LHC
Authors:
MoEDAL Collaboration,
B. Acharya,
J. Alexandre,
K. Bendtz,
P. Benes,
J. Bernabéu,
M. Campbell,
S. Cecchini,
J. Chwastowski,
A. Chatterjee,
M. de Montigny,
D. Derendarz,
A. De Roeck,
J. R. Ellis,
M. Fairbairn,
D. Felea,
M. Frank,
D. Frekers,
C. Garcia,
G. Giacomelli,
D. Haşegan,
M. Kalliokoski,
A. Katre,
D. -W. Kim,
M. G. L. King
, et al. (44 additional authors not shown)
Abstract:
The MoEDAL experiment is designed to search for magnetic monopoles and other highly-ionising particles produced in high-energy collisions at the LHC. The largely passive MoEDAL detector, deployed at Interaction Point 8 on the LHC ring, relies on two dedicated direct detection techniques. The first technique is based on stacks of nuclear-track detectors with surface area $\sim$18 m$^2$, sensitive t…
▽ More
The MoEDAL experiment is designed to search for magnetic monopoles and other highly-ionising particles produced in high-energy collisions at the LHC. The largely passive MoEDAL detector, deployed at Interaction Point 8 on the LHC ring, relies on two dedicated direct detection techniques. The first technique is based on stacks of nuclear-track detectors with surface area $\sim$18 m$^2$, sensitive to particle ionisation exceeding a high threshold. These detectors are analysed offline by optical scanning microscopes. The second technique is based on the trapping of charged particles in an array of roughly 800 kg of aluminium samples. These samples are monitored offline for the presence of trapped magnetic charge at a remote superconducting magnetometer facility. We present here the results of a search for magnetic monopoles using a 160 kg prototype MoEDAL trapping detector exposed to 8 TeV proton-proton collisions at the LHC, for an integrated luminosity of 0.75 fb$^{-1}$. No magnetic charge exceeding $0.5g_{\rm D}$ (where $g_{\rm D}$ is the Dirac magnetic charge) is measured in any of the exposed samples, allowing limits to be placed on monopole production in the mass range 100 GeV$\leq m \leq$ 3500 GeV. Model-independent cross-section limits are presented in fiducial regions of monopole energy and direction for $1g_{\rm D}\leq|g|\leq 6g_{\rm D}$, and model-dependent cross-section limits are obtained for Drell-Yan pair production of spin-1/2 and spin-0 monopoles for $1g_{\rm D}\leq|g|\leq 4g_{\rm D}$. Under the assumption of Drell-Yan cross sections, mass limits are derived for $|g|=2g_{\rm D}$ and $|g|=3g_{\rm D}$ for the first time at the LHC, surpassing the results from previous collider experiments.
△ Less
Submitted 11 July, 2016; v1 submitted 22 April, 2016;
originally announced April 2016.
-
Turning the LHC Ring into a New Physics Search Machine
Authors:
Matti Kalliokoski,
Jerry W. Lämsä,
Mikael Mieskolainen,
Risto Orava
Abstract:
By combining the LHC Beam Loss Monitoring (BLM) system with the LHC experiments, a powerful search machine for new physics beyond the standard model can be realised. The pair of final state protons in the central production process, exit the LHC beam vacuum chamber at locations determined by their fractional momentum losses and will be detected by the BLM detectors. By mapping out the coincident p…
▽ More
By combining the LHC Beam Loss Monitoring (BLM) system with the LHC experiments, a powerful search machine for new physics beyond the standard model can be realised. The pair of final state protons in the central production process, exit the LHC beam vacuum chamber at locations determined by their fractional momentum losses and will be detected by the BLM detectors. By mapping out the coincident pairs of the BLM identified proton candidates around the four LHC interaction regions, a scan for centrally produced particle states can be made independently of their decay modes.
△ Less
Submitted 22 April, 2016; v1 submitted 19 April, 2016;
originally announced April 2016.
-
Preliminary Results of the CASCADE Hidden Sector Photon Search
Authors:
Nathan Woollett,
Ian Bailey,
Graeme Burt,
Swapan Chattopadhyay,
John Dainton,
Amos Dexter,
Phillipe Goudket,
Michael Jenkins,
Matti Kalliokoski,
Andrew Moss,
Shrikant Pattalwar,
Trina Thakker,
Peter Williams
Abstract:
Light shining through a wall experiments can be used to make measurements of photon-WISP couplings. The first stage of the CASCADE experiment at the Cockcroft Institute of Accelerator Science and Technology is intended to be a proof-of-principle experiment utilising standard microwave technologies to make a modular, cryogenic HSP detector to take advantage of future high-power superconducting cavi…
▽ More
Light shining through a wall experiments can be used to make measurements of photon-WISP couplings. The first stage of the CASCADE experiment at the Cockcroft Institute of Accelerator Science and Technology is intended to be a proof-of-principle experiment utilising standard microwave technologies to make a modular, cryogenic HSP detector to take advantage of future high-power superconducting cavity tests. In these proceedings we will be presenting the preliminary results of the CASCADE LSW experiment showing a peak expected exclusion of $1.10 \times 10^{-8}$ in the mass range from 1.96$μ$eV to 5.38$μ$eV, exceeding current limits.
△ Less
Submitted 25 September, 2015;
originally announced September 2015.