-
X-ray diffraction reveals the consequences of strong deformation in thin smectic films: dilation and chevron formation
Authors:
Jean de Dieu Niyonzima,
Haifa Jeridi,
Lamya Essaoui,
Caterina Tosarelli,
Alina Vlad,
Alessandro Coati,
Sebastien Royer,
Isabelle Trimaille,
Michel Goldmann,
Bruno Gallas,
Doru Constantin,
David Babonneau,
Yves Garreau,
Bernard Croset,
Samo Kralj,
Randall D. Kamien,
Emmanuelle Lacaze
Abstract:
Smectic liquid crystals can be viewed as model systems for lamellar structures for which there has been extensive theoretical development. We demonstrate that a nonlinear energy description is required with respect to the usual Landau-de Gennes elasticity in order to explain the observed layer spacing of highly curved smectic layers. Using X-ray diffraction we have quantitatively determined the di…
▽ More
Smectic liquid crystals can be viewed as model systems for lamellar structures for which there has been extensive theoretical development. We demonstrate that a nonlinear energy description is required with respect to the usual Landau-de Gennes elasticity in order to explain the observed layer spacing of highly curved smectic layers. Using X-ray diffraction we have quantitatively determined the dilation of bent layers distorted by antagonistic anchoring (as high as 1.8% of dilation for the most bent smectic layers) and accurately described it by the minimal nonlinear expression for energy. We observe a 1° tilt of planar layers that are connected to the curved layers. This value is consistent with simple energetic calculations, demonstrating how the bending energy impacts the overall structure of a thin distorted smectic film. Finally, we show that combined X-ray measurements and theoretical modeling allow for the quantitative determination of the number of curved smectic layers and of the resulting thickness of the dilated region with unprecedented precision.
△ Less
Submitted 15 July, 2024;
originally announced July 2024.
-
A Bouquet for Apollonius: Focal Conics in Sessile Cholesteric Droplets
Authors:
Randall D. Kamien,
Yuriy Nastishin,
Brigitte Pansu
Abstract:
Focal conic domains, are defects characteristic of layered liquid crystal phases. Their association can built flowers where petals are the ellipses of the Dupin cyclides involved in these defect. We report here the observation of focal conic flowers in cholesteric droplets sessile on a glass surface and surrounded by glycerol. The observation of the droplets in different directions helps to solve…
▽ More
Focal conic domains, are defects characteristic of layered liquid crystal phases. Their association can built flowers where petals are the ellipses of the Dupin cyclides involved in these defect. We report here the observation of focal conic flowers in cholesteric droplets sessile on a glass surface and surrounded by glycerol. The observation of the droplets in different directions helps to solve the 3D architecture of the flower. The effects of the droplet size and of the pitch value are also reported.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
Escape from the Second Dimension: A Topological Distinction Between Edge and Screw Dislocations
Authors:
Paul G. Severino,
Randall D. Kamien
Abstract:
Volterra's definition of dislocations in crystals distinguishes edge and screw defects geometrically, according to whether the Burgers vector is perpendicular or parallel to the defect. Here, we demonstrate a distinction between screw and edge dislocations that enables a unified, purely topological means of classification. Our construction relies on the construction of real or virtual disclination…
▽ More
Volterra's definition of dislocations in crystals distinguishes edge and screw defects geometrically, according to whether the Burgers vector is perpendicular or parallel to the defect. Here, we demonstrate a distinction between screw and edge dislocations that enables a unified, purely topological means of classification. Our construction relies on the construction of real or virtual disclination-line pairs at the core of the dislocation in a smectic and can be generalized to crystals with triply-periodic order. The connection between topology and geometry is exploited.
△ Less
Submitted 14 April, 2023;
originally announced April 2023.
-
What Promotes Smectic Order: Applying Mean Field Theory to the Ends
Authors:
David A. King,
Randall D. Kamien
Abstract:
Not every particle that forms a nematic liquid crystal makes a smectic. The particle tip is critical for this behaviour. Ellipsoids do not make a smectic, but sphero-cylinders do. Similarly, only those N-CB alkylcyanobiphenyls with sufficiently long ($N\ge 8$ carbons) alkane tails form smectics. We understand the role of the particle tip in the smectic transition by means of a simple two-dimension…
▽ More
Not every particle that forms a nematic liquid crystal makes a smectic. The particle tip is critical for this behaviour. Ellipsoids do not make a smectic, but sphero-cylinders do. Similarly, only those N-CB alkylcyanobiphenyls with sufficiently long ($N\ge 8$ carbons) alkane tails form smectics. We understand the role of the particle tip in the smectic transition by means of a simple two-dimensional model. We model sphero-cylinders by "boubas" with rounded tips, and ellipsoids by "kikis" with pointed tips. The N-CB molecules are modelled by a small body with a polymer tail. We find that rounded tips and longer polymer tails lead to a smectic at lower densities by making the space between layers less accessible, destabilizing the nematic.
△ Less
Submitted 31 December, 2022;
originally announced January 2023.
-
Entanglements and Whitehead Products: Generalizing Kleman's Construction to Higher-Dimensional Defects
Authors:
Gareth P. Alexander,
Randall D. Kamien
Abstract:
We review the interpretation of Whitehead products in homotopy theory as an entanglement of topological defects in ordered media.
We review the interpretation of Whitehead products in homotopy theory as an entanglement of topological defects in ordered media.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Helfrich-Hurault elastic instabilities driven by geometrical frustration
Authors:
Christophe Blanc,
Guillaume Durey,
Randall D. Kamien,
Teresa Lopez-Leon,
Maxim O. Lavrentovich,
Lisa Tran
Abstract:
The Helfrich-Hurault (HH) elastic instability is a well-known mechanism behind patterns that form as a result of strain upon liquid crystal systems with periodic ground states. In the HH model, layered structures undulate and buckle in response to local, geometric incompatibilities, in order to maintain the preferred layer spacing. Classic HH systems include cholesteric liquid crystals under elect…
▽ More
The Helfrich-Hurault (HH) elastic instability is a well-known mechanism behind patterns that form as a result of strain upon liquid crystal systems with periodic ground states. In the HH model, layered structures undulate and buckle in response to local, geometric incompatibilities, in order to maintain the preferred layer spacing. Classic HH systems include cholesteric liquid crystals under electromagnetic field distortions and smectic liquid crystals under mechanical strains, where both materials are confined between rigid substrates. However, richer phenomena are observed when undulation instabilities occur in the presence of deformable interfaces and variable boundary conditions. Understanding how the HH instability is affected by deformable surfaces is imperative for applying the instability to a broader range of materials. In this review, we re-examine the HH instability and give special focus to how the boundary conditions influence the mechanical response of lamellar systems to geometrical frustration. We use lamellar liquid crystals confined within a spherical shell geometry as our model system. Made possible by the relatively recent advances in microfluidics within the past 15 years, liquid crystal shells are composed entirely of fluid interfaces and have boundary conditions that can be dynamically controlled at will. We examine past and recent work that exemplifies how topological constraints, molecular anchoring conditions, and boundary curvature can trigger the HH instability in liquid crystals with periodic ground states. We then end by identifying similar phenomena across a wide variety of materials, both biological and synthetic. With this review, we aim to highlight that the HH instability is a generic and often overlooked response of periodic materials to geometrical frustration.
△ Less
Submitted 29 September, 2021;
originally announced September 2021.
-
Twisted loxodromes in spindle-shaped polymer nematics
Authors:
Helen S. Ansell,
Randall D. Kamien
Abstract:
We develop an energetic model that captures the twisting behavior of spindle-shaped polymer microparticles with nematic ordering, which display remarkably different twisting behavior to ordinary nematics confined to spindles. We have previously developed a geometric model of the twisting, based on experimental observations, in which we showed that the twist pattern follows loxodrome spirals [Ansel…
▽ More
We develop an energetic model that captures the twisting behavior of spindle-shaped polymer microparticles with nematic ordering, which display remarkably different twisting behavior to ordinary nematics confined to spindles. We have previously developed a geometric model of the twisting, based on experimental observations, in which we showed that the twist pattern follows loxodrome spirals [Ansell et. al., Phys. Rev. Lett., 123, 157801 (2019)]. In this study, we first consider a spindle-shaped surface and show that the loxodrome twisting behavior of our system can be captured by the Frank free energy of the nematic with an additional term constraining the length of the integral curves of the system. We then extend the ideas of this model to the bulk and explore the parameter space for which the twisted loxodrome solution is energetically favorable.
△ Less
Submitted 24 May, 2021;
originally announced May 2021.
-
The Topological Origin of the Peierls-Nabarro Barrier
Authors:
Brook J. Hocking,
Helen S. Ansell,
Randall D. Kamien,
Thomas Machon
Abstract:
Crystals and other condensed matter systems described by density waves often exhibit dislocations. Here we show, by considering the topology of the ground state manifolds (GSMs) of such systems, that dislocations in the density phase field always split into disclinations, and that the disclinations themselves are constrained to sit at particular points in the GSM. Consequently, the topology of the…
▽ More
Crystals and other condensed matter systems described by density waves often exhibit dislocations. Here we show, by considering the topology of the ground state manifolds (GSMs) of such systems, that dislocations in the density phase field always split into disclinations, and that the disclinations themselves are constrained to sit at particular points in the GSM. Consequently, the topology of the GSM forbids zero-energy dislocation glide, giving rise to a Peirels-Nabarro barrier.
△ Less
Submitted 2 March, 2021;
originally announced March 2021.
-
Good Fibrations: Packing Rules for Diabolic Domains
Authors:
Randall D. Kamien,
Thomas Machon
Abstract:
We describe a theory of packing hyperboloid 'diabolic' domains in bend-free textures of liquid crystals. The domains sew together continuously, providing a menagerie of bend-free textures akin to the packing of focal conic domains in smectic liquid crystals. We show how distinct domains may be related to each other by Lorentz transformations, and that this process may lower the elastic energy of t…
▽ More
We describe a theory of packing hyperboloid 'diabolic' domains in bend-free textures of liquid crystals. The domains sew together continuously, providing a menagerie of bend-free textures akin to the packing of focal conic domains in smectic liquid crystals. We show how distinct domains may be related to each other by Lorentz transformations, and that this process may lower the elastic energy of the system. We discuss a number of phases that may be formed as a result, including splay-twist analogues of blue phases. We also discuss how these diabolic domains may be subject to "superluminal boosts", yielding defects analogous to shocks waves. We explore the geometry of these textures, demonstrating their relation to Milnor fibrations of the Hopf link. Finally, we show how the theory of these domains is unified in four-dimensional space.
△ Less
Submitted 11 July, 2020;
originally announced July 2020.
-
Gnomonious Projections for Bend-Free Textures: Thoughts on the Splay-Twist Phase
Authors:
N. Chaturvedi,
Randall D. Kamien
Abstract:
The Hopf fibration has inspired any number of geometric structures in physical systems, in particular in chiral liquid crystalline materials. Because the Hopf fibration lives on the three sphere, $\mathbb{S}^3$, some method of projection or distortion must be employed to realize textures in flat space. Here, we explore the geodesic-preserving gnomonic projection of the Hopf fibration, and show tha…
▽ More
The Hopf fibration has inspired any number of geometric structures in physical systems, in particular in chiral liquid crystalline materials. Because the Hopf fibration lives on the three sphere, $\mathbb{S}^3$, some method of projection or distortion must be employed to realize textures in flat space. Here, we explore the geodesic-preserving gnomonic projection of the Hopf fibration, and show that this could be the basis for a new liquid crystalline texture with only splay and twist. We outline the structure and show that it is defined by the tangent vectors along the straight line rulings on a series of hyperboloids. The phase is defined by a lack of bend deformations in the texture, and is reminiscent of the splay-bend and twist-bend nematic phases. We show that domains of this phase may be stabilized through anchoring and saddle-splay.
△ Less
Submitted 9 January, 2020; v1 submitted 26 November, 2019;
originally announced November 2019.
-
Threading the spindle: a geometric study of chiral liquid crystal polymer microparticles
Authors:
H. S. Ansell,
D. S. Kim,
R. D. Kamien,
E. Katifori,
T. Lopez-Leon
Abstract:
Polymeric particles are strong candidates for designing artificial materials capable of emulating the complex twisting-based functionality observed in biological systems. In this letter, we provide the first detailed investigation of the swelling behavior of bipolar polymer liquid crystalline microparticles. Deswelling from the spherical bipolar configuration causes the microparticle to contract a…
▽ More
Polymeric particles are strong candidates for designing artificial materials capable of emulating the complex twisting-based functionality observed in biological systems. In this letter, we provide the first detailed investigation of the swelling behavior of bipolar polymer liquid crystalline microparticles. Deswelling from the spherical bipolar configuration causes the microparticle to contract anisotropically and twist in the process, resulting in a twisted spindle shaped structure. We propose a model to describe the observed spiral patterns and twisting behavior.
△ Less
Submitted 3 May, 2019;
originally announced May 2019.
-
Mechanisms to Splay-Bend Nematic Phases
Authors:
N. Chaturvedi,
Randall D. Kamien
Abstract:
While twist-bend nematic phases have been extensively studied, the experimental observation of two dimensional, oscillating splay-bend phases is recent. We consider two theoretical models that have been used to explain the formation of twist-bend phases -- flexoelectricity and bond orientational order -- as mechanisms to induce splay-bend phases. Flexoelectricity is a viable mechanism, and splay a…
▽ More
While twist-bend nematic phases have been extensively studied, the experimental observation of two dimensional, oscillating splay-bend phases is recent. We consider two theoretical models that have been used to explain the formation of twist-bend phases -- flexoelectricity and bond orientational order -- as mechanisms to induce splay-bend phases. Flexoelectricity is a viable mechanism, and splay and bend flexoelectric couplings can lead to splay-bend phases with different modulations. We show that while bond orientational order circumvents the need for higher order terms in the free energy, the important role of nematic symmetry and phase chirality rules it out as a basic mechanism.
△ Less
Submitted 19 April, 2019;
originally announced April 2019.
-
Keeping it Together: Interleaved Kirigami Extension Assembly
Authors:
Xinyu Wang,
Simon D. Guest,
Randall D. Kamien
Abstract:
Traditional origami structures can be continuously deformed back to a flat sheet of paper, while traditional kirigami requires glue or seams in order to maintain its rigidity. In the former, non-trivial geometry can be created through overfolding paper while, in the latter, the paper topology is modified. Here we propose a hybrid approach that relies upon overlapped flaps that create in-plane comp…
▽ More
Traditional origami structures can be continuously deformed back to a flat sheet of paper, while traditional kirigami requires glue or seams in order to maintain its rigidity. In the former, non-trivial geometry can be created through overfolding paper while, in the latter, the paper topology is modified. Here we propose a hybrid approach that relies upon overlapped flaps that create in-plane compression resulting in the formation of "virtual" elastic shells. Not only are these structures self-supporting, but they have colossal load-to-weight ratios of order 10000.
△ Less
Submitted 5 December, 2019; v1 submitted 27 February, 2019;
originally announced February 2019.
-
Aspects of Defect Topology in Smectic Liquid Crystals
Authors:
Thomas Machon,
Hillel Aharoni,
Yichen Hu,
Randall D. Kamien
Abstract:
We study the topology of smectic defects in two and three dimensions. We give a topological classification of smectic point defects and disclination lines in three dimensions. In addition we describe the combination rules for smectic point defects in two and three dimensions, showing how the broken translational symmetry of the smectic confers a path dependence on the result of defect addition.
We study the topology of smectic defects in two and three dimensions. We give a topological classification of smectic point defects and disclination lines in three dimensions. In addition we describe the combination rules for smectic point defects in two and three dimensions, showing how the broken translational symmetry of the smectic confers a path dependence on the result of defect addition.
△ Less
Submitted 13 August, 2018;
originally announced August 2018.
-
Modelling textile structures using bicontinuous surfaces
Authors:
Chelsea E. Knittel,
Michael Tanis,
Amy L. Stoltzfus,
Toen Castle,
Randall D. Kamien,
Genevieve Dion
Abstract:
We present a method for modelling textile structures, such as weft knits, on families of bicontinuous surfaces. By developing a tangible interpretation of mathematical theory, we combine perspectives of art, design, engineering, and science to understand how the architecture of the knit relates to its physical and mathematical properties. While modelling and design tools have become ubiquitous in…
▽ More
We present a method for modelling textile structures, such as weft knits, on families of bicontinuous surfaces. By developing a tangible interpretation of mathematical theory, we combine perspectives of art, design, engineering, and science to understand how the architecture of the knit relates to its physical and mathematical properties. While modelling and design tools have become ubiquitous in many industries, there is still a significant lack of predictive advanced manufacturing techniques available for the design and manufacture of textiles. We describe a mathematical structure as a system for dynamic modelling of textiles in the form of a physical prototype which may be used to inform and predict relevant textile parameters prior to fabrication. This includes dimensional changes due to yarn relaxation, which would streamline production of knit textiles for industry, makers and textile artists.
△ Less
Submitted 5 July, 2018;
originally announced July 2018.
-
Shaping nanoparticle fingerprints at the interface of cholesteric droplets
Authors:
Lisa Tran,
Hye-Na Kim,
Ningwei Li,
Shu Yang,
Kathleen J. Stebe,
Randall D. Kamien,
Martin F. Haase
Abstract:
The ordering of nanoparticles into predetermined configurations is of importance to the design of advanced technologies. In this work, we moderate the surface anchoring against the bulk elasticity of liquid crystals to dynamically shape nanoparticle assemblies at a fluid interface. By tuning the degree of nanoparticle hydrophobicity with surfactants that alter the molecular anchoring of liquid cry…
▽ More
The ordering of nanoparticles into predetermined configurations is of importance to the design of advanced technologies. In this work, we moderate the surface anchoring against the bulk elasticity of liquid crystals to dynamically shape nanoparticle assemblies at a fluid interface. By tuning the degree of nanoparticle hydrophobicity with surfactants that alter the molecular anchoring of liquid crystals, we pattern nanoparticles at the interface of cholesteric liquid crystal emulsions. Adjusting the particle hydrophobicity more finely further modifies the rigidity of assemblies. We establish that patterns are tunable by varying both surfactant and chiral dopant concentrations. Since particle assembly occurs at the interface with the desired structures exposed to the surrounding phase, we demonstrate that particles can be readily crosslinked and manipulated, forming structures that retain their shape under external perturbations. This study establishes the templating of nanomaterials into reconfigurable arrangements. Interfacial assembly is tempered by elastic patterns that arise from the geometric frustration of confined cholesterics. This work serves as a basis for creating materials with chemical heterogeneity and with linear, periodic structures, essential for optical and energy applications.
△ Less
Submitted 11 April, 2018;
originally announced April 2018.
-
Aspects of nucleation on curved and flat surfaces
Authors:
Eric M. Horsley,
Maxim O. Lavrentovich,
Randall D. Kamien
Abstract:
We investigate the energetics of droplets sourced by the thermal fluctuations in a system undergoing a first-order transition. In particular, we confine our studies to two dimensions with explicit calulations in the plane and on the sphere. Using an isoperimetric inequality from the differential geometry literature and a theorem on the inequality's saturation, we show how geometry informs the crit…
▽ More
We investigate the energetics of droplets sourced by the thermal fluctuations in a system undergoing a first-order transition. In particular, we confine our studies to two dimensions with explicit calulations in the plane and on the sphere. Using an isoperimetric inequality from the differential geometry literature and a theorem on the inequality's saturation, we show how geometry informs the critical droplet size and shape. This inequality establishes a "mean field" result for nucleated droplets. We then study the effects of fluctuations on the interfaces of droplets in two dimensions, treating the droplet interface as a fluctuating line. We emphasize that care is needed in deriving the line curvature energy from the Landau-Ginzburg energy functional and in interpreting the scalings of the nucleation rate with the size of the droplet. We end with a comparison of nucleation in the plane and on a sphere.
△ Less
Submitted 25 June, 2018; v1 submitted 22 March, 2018;
originally announced March 2018.
-
Making Faces: Universal Inverse Design of Surfaces with Thin Nematic Elastomer Sheets
Authors:
Hillel Aharoni,
Yu Xia,
Xinyue Zhang,
Randall D. Kamien,
Shu Yang
Abstract:
Programmable shape-shifting materials can take different physical forms to achieve multifunctionality in a dynamic and controllable manner. Although morphing a shape from 2D to 3D via programmed inhomogeneous local deformations has been demonstrated in various ways, the inverse problem -- programming a sheet to take an arbitrary desired 3D shape -- is much harder yet critical to realize specific f…
▽ More
Programmable shape-shifting materials can take different physical forms to achieve multifunctionality in a dynamic and controllable manner. Although morphing a shape from 2D to 3D via programmed inhomogeneous local deformations has been demonstrated in various ways, the inverse problem -- programming a sheet to take an arbitrary desired 3D shape -- is much harder yet critical to realize specific functions. Here, we address this inverse problem in thin liquid crystal elastomer (LCE) sheets, where the shape is preprogrammed by precise and local control of the molecular orientation of the liquid crystal monomers. We show how blueprints for arbitrary surface geometries as well as local extrinsic curvatures can be generated using approximate numerical methods. Backed by faithfully alignable and rapidly lockable LCE chemistry, we precisely embed our designs in LCE sheets using advanced top-down microfabrication techniques. We thus successfully produce flat sheets that, upon thermal activation, take an arbitrary desired shape, such as a face. The general design principles presented here for creating an arbitrary 3D shape will allow for exploration of unmet needs in flexible electronics, metamaterials, aerospace and medical devices, and more.
△ Less
Submitted 22 November, 2017; v1 submitted 23 October, 2017;
originally announced October 2017.
-
Elastocapillary driven assembly of particles at free-standing smectic-A films
Authors:
Mohamed Amine Gharbi,
Daniel A. Beller,
Nima Sharifi-Mood,
Rohini Gupta,
Randall D. Kamien,
Shu Yang,
Kathleen J. Stebe
Abstract:
Colloidal particles at complex fluid interfaces and within films assemble to form ordered structures with high degrees of symmetry via interactions that include capillarity, elasticity, and other fields like electrostatic charge. Here we study microparticle interactions within free-standing smectic-A films, in which the elasticity arising from the director field distortion and capillary interactio…
▽ More
Colloidal particles at complex fluid interfaces and within films assemble to form ordered structures with high degrees of symmetry via interactions that include capillarity, elasticity, and other fields like electrostatic charge. Here we study microparticle interactions within free-standing smectic-A films, in which the elasticity arising from the director field distortion and capillary interactions arising from interface deformation compete to direct the assembly of motile particles. New colloidal assemblies and patterns, ranging from 1D chains to 2D aggregates, sensitive to the initial wetting conditions of particles at the smectic film, are reported. This work paves the way to exploiting LC interfaces as a means to direct spontaneously formed, reconfigurable, and optically active materials.
△ Less
Submitted 23 January, 2018; v1 submitted 24 September, 2017;
originally announced September 2017.
-
A change in stripes for cholesteric shells via anchoring in moderation
Authors:
Lisa Tran,
Maxim O. Lavrentovich,
Guillaume Durey,
Alexandre Darmon,
Martin F. Haase,
Ningwei Li,
Daeyeon Lee,
Kathleen J. Stebe,
Randall D. Kamien,
Teresa Lopez-Leon
Abstract:
Chirality, ubiquitous in complex biological systems, can be controlled and quantified in synthetic materials such as cholesteric liquid crystal (CLC) systems. In this work, we study spherical shells of CLC under weak anchoring conditions. We induce anchoring transitions at the inner and outer boundaries using two independent methods: by changing the surfactant concentration or by raising the tempe…
▽ More
Chirality, ubiquitous in complex biological systems, can be controlled and quantified in synthetic materials such as cholesteric liquid crystal (CLC) systems. In this work, we study spherical shells of CLC under weak anchoring conditions. We induce anchoring transitions at the inner and outer boundaries using two independent methods: by changing the surfactant concentration or by raising the temperature close to the clearing point. The shell confinement leads to new states and associated surface structures: a state where large stripes on the shell can be filled with smaller, perpendicular sub-stripes, and a focal conic domain (FCD) state, where thin stripes wrap into at least two, topologically required, double spirals. Focusing on the latter state, we use a Landau-de Gennes model of the CLC to simulate its detailed configurations as a function of anchoring strength. By abruptly changing the topological constraints on the shell, we are able to study the interconversion between director defects and pitch defects, a phenomenon usually restricted by the complexity of the cholesteric phase. This work extends the knowledge of cholesteric patterns, structures that not only have potential for use as intricate, self-assembly blueprints but are pervasive in biological systems.
△ Less
Submitted 14 June, 2017;
originally announced June 2017.
-
Composite Dislocations in Smectic Liquid Crystals
Authors:
Hillel Aharoni,
Thomas Machon,
Randall D. Kamien
Abstract:
Smectic liquid crystals are charcterized by layers that have a preferred uniform spacing and vanishing curvature in their ground state. Dislocations in the smectics play an important role in phase nucleation, layer reorientation, and dynamics. Typically modeled as possessing one line singularity, the layer structure of a dislocation leads to a diverging compression strain as one approaches the def…
▽ More
Smectic liquid crystals are charcterized by layers that have a preferred uniform spacing and vanishing curvature in their ground state. Dislocations in the smectics play an important role in phase nucleation, layer reorientation, and dynamics. Typically modeled as possessing one line singularity, the layer structure of a dislocation leads to a diverging compression strain as one approaches the defect center, suggesting a large, elastically determined melted core. However, it has been observed that for large charge dislocations, the defect breaks up into two disclinations [C. E. Williams, Philos. Mag. 32, 313 (1975)]. Here we investigate the topology of the composite core. Because the smectic cannot twist, transformations between different disclination geometries are highly constrained. We demonstrate the geometric route between them and show that despite enjoying precisely the topological rules of the three-dimensional nematic, the additional structure of line disclinations in three-dimensional smectics localizes transitions to higher-order point singularities.
△ Less
Submitted 26 April, 2017; v1 submitted 26 January, 2017;
originally announced January 2017.
-
Topological colloids
Authors:
Bohdan Senyuk,
Qingkun Liu,
Sailing He,
Randall D. Kamien,
Robert B. Kusner,
Tom C. Lubensky,
Ivan I. Smalyukh
Abstract:
Abundant in nature, colloids also find increasingly important applications in science and technology, ranging from direct probing of kinetics in crystals and glasses to fabrication of third-generation quantum-dot solar cells. Because naturally occurring colloids have a shape that is typically determined by minimization of interfacial tension (for example, during phase separation) or faceted crysta…
▽ More
Abundant in nature, colloids also find increasingly important applications in science and technology, ranging from direct probing of kinetics in crystals and glasses to fabrication of third-generation quantum-dot solar cells. Because naturally occurring colloids have a shape that is typically determined by minimization of interfacial tension (for example, during phase separation) or faceted crystal growth, their surfaces tend to have minimum-area spherical or topologically equivalent shapes such as prisms and irregular grains (all continuously deformable - homeomorphic - to spheres). Although toroidal DNA condensates and vesicles with different numbers of handles can exist and soft matter defects can be shaped as rings and knots, the role of particle topology in colloidal systems remains unexplored. Here we fabricate and study colloidal particles with different numbers of handles and genus g ranging from 1 to 5. When introduced into a nematic liquid crystal - a fluid made of rod-like molecules that spontaneously align along the so-called "director" - these particles induce three-dimensional director fields and topological defects dictated by colloidal topology. Whereas electric fields, photothermal melting and laser tweezing cause transformations between configurations of particle-induced structures, three-dimensional nonlinear optical imaging reveals that topological charge is conserved and that the total charge of particle-induced defects always obeys predictions of the Gauss-Bonnet and Poincare-Hopf index theorems. This allows us to establish and experimentally test the procedure for assignment and summation of topological charges in three-dimensional director fields. Our findings lay the groundwork for new applications of colloids and liquid crystals that range from topological memory devices, through new types of self-assembly, to the experimental study of low-dimensional topology.
△ Less
Submitted 27 December, 2016;
originally announced December 2016.
-
Straight Round the Twist: Frustration and Chirality in Smectics-A
Authors:
Elisabetta A. Matsumoto,
Randall D. Kamien,
Gareth P. Alexander
Abstract:
Frustration is a powerful mechanism in condensed matter systems, driving both order and co plexity. In smectics, the frustration between macroscopic chirality and equally spaced layers generates textures characterised by a proliferation of defects. In this article, we study several different ground states of the chiral Landau-de Gennes free energy for a smectic liquid crystal. The standard theory…
▽ More
Frustration is a powerful mechanism in condensed matter systems, driving both order and co plexity. In smectics, the frustration between macroscopic chirality and equally spaced layers generates textures characterised by a proliferation of defects. In this article, we study several different ground states of the chiral Landau-de Gennes free energy for a smectic liquid crystal. The standard theory finds the twist grain boundary (TGB) phase to be the ground state for chiral type II smectics. However, for very highly chiral systems, the hierarchical helical nanofilament (HN) phase can form and is stable over the TGB.
△ Less
Submitted 11 November, 2016;
originally announced November 2016.
-
Achiral symmetry breaking and positive Gaussian modulus lead to scalloped colloidal membranes
Authors:
Thomas Gibaud,
C. Nadir Kaplan,
Prerna Sharma,
Andrew Ward,
Mark J. Zakhary,
Rudolf Oldenbourg,
Robert B. Meyer,
Randall D. Kamien,
Thomas R. Powers,
Zvonimir Dogic
Abstract:
In the presence of a non-adsorbing polymer, monodisperse rod-like particles assemble into colloidal membranes, which are one rod-length thick liquid-like monolayers of aligned rods. Unlike 3D edgeless bilayer vesicles, colloidal monolayer membranes form open structures with an exposed edge, thus presenting an opportunity to study physics of thin elastic sheets. Membranes assembled from single-comp…
▽ More
In the presence of a non-adsorbing polymer, monodisperse rod-like particles assemble into colloidal membranes, which are one rod-length thick liquid-like monolayers of aligned rods. Unlike 3D edgeless bilayer vesicles, colloidal monolayer membranes form open structures with an exposed edge, thus presenting an opportunity to study physics of thin elastic sheets. Membranes assembled from single-component chiral rods form flat disks with uniform edge twist. In comparison, membranes comprised of mixture of rods with opposite chiralities can have the edge twist of either handedness. In this limit disk-shaped membranes become unstable, instead forming structures with scalloped edges, where two adjacent lobes with opposite handedness are separated by a cusp-shaped point defect. Such membranes adopt a 3D configuration, with cusp defects alternatively located above and below the membrane plane. In the achiral regime the cusp defects have repulsive interactions, but away from this limit we measure effective long-ranged attractive binding. A phenomenological model shows that the increase in the edge energy of scalloped membranes is compensated by concomitant decrease in the deformation energy due to Gaussian curvature associated with scalloped edges, demonstrating that colloidal membranes have positive Gaussian modulus. A simple excluded volume argument predicts the sign and magnitude of the Gaussian curvature modulus that is in agreement with experimental measurements. Our results provide insight into how the interplay between membrane elasticity, geometrical frustration and achiral symmetry breaking can be used to fold colloidal membranes into 3D shapes.
△ Less
Submitted 7 November, 2016; v1 submitted 20 October, 2016;
originally announced October 2016.
-
First-order patterning transitions on a sphere as a route to cell morphology
Authors:
Maxim O. Lavrentovich,
Eric M. Horsley,
Asja Radja,
Alison M. Sweeney,
Randall D. Kamien
Abstract:
We propose a general theory for surface patterning in many different biological systems, including mite and insect cuticles, pollen grains, fungal spores, and insect eggs. The patterns of interest are often intricate and diverse, yet an individual pattern is robustly reproducible by a single species and a similar set of developmental stages produces a variety of patterns. We argue that the pattern…
▽ More
We propose a general theory for surface patterning in many different biological systems, including mite and insect cuticles, pollen grains, fungal spores, and insect eggs. The patterns of interest are often intricate and diverse, yet an individual pattern is robustly reproducible by a single species and a similar set of developmental stages produces a variety of patterns. We argue that the pattern diversity and reproducibility may be explained by interpreting the pattern development as a first-order phase transition to a spatially modulated phase. Brazovskii showed that for such transitions on a flat, infinite sheet, the patterns are uniform striped or hexagonal. Biological objects, however, have finite extent and offer different topologies, such as the spherical surfaces of pollen grains. We consider Brazovskii transitions on spheres and show that the patterns have a richer phenomenology than simple stripes or hexagons. We calculate the free energy difference between the unpatterned state and the many possible patterned phases, taking into account fluctuations and the system's finite size. The proliferation of variety on a sphere may be understood as a consequence of topology, which forces defects into perfectly ordered phases. The defects are then accommodated in different ways. We also argue that the first-order character of the transition is responsible for the reproducibility and robustness of the pattern formation.
△ Less
Submitted 31 May, 2016; v1 submitted 1 March, 2016;
originally announced March 2016.
-
Lassoing saddle splay and the geometrical control of topological defects
Authors:
Lisa Tran,
Maxim O. Lavrentovich,
Daniel A. Beller,
Ningwei Li,
Kathleen J. Stebe,
Randall D. Kamien
Abstract:
Systems with holes, such as colloidal handlebodies and toroidal droplets, have been studied in the nematic liquid crystal (NLC) 4-cyano-4'-pentylbiphenyl (5CB): both point and ring topological defects can occur within each hole and around the system, while conserving the system's overall topological charge. However, what has not been fully appreciated is the ability to manipulate the hole geometry…
▽ More
Systems with holes, such as colloidal handlebodies and toroidal droplets, have been studied in the nematic liquid crystal (NLC) 4-cyano-4'-pentylbiphenyl (5CB): both point and ring topological defects can occur within each hole and around the system, while conserving the system's overall topological charge. However, what has not been fully appreciated is the ability to manipulate the hole geometry with homeotropic (perpendicular) anchoring conditions to induce complex, saddle-like deformations. We exploit this by creating an array of holes suspended in an NLC cell with oriented planar (parallel) anchoring at the cell boundaries. We study both 5CB and a binary mixture of bicyclohexane derivatives (CCN-47 and CCN-55). Through simulations and experiments, we study how the bulk saddle deformations of each hole interact to create novel defect structures, including an array of disclination lines, reminiscent of those found in liquid crystal blue phases. The line locations are tunable via the NLC elastic constants, the cell geometry, and the size and spacing of holes in the array. This research lays the groundwork for the control of complex elastic deformations of varying length scales via geometrical cues in materials that are renowned in the display industry for their stability and easy manipulability.
△ Less
Submitted 25 May, 2016; v1 submitted 22 February, 2016;
originally announced February 2016.
-
The weirdest martensite: Smectic liquid crystal microstructure and Weyl-Poincaré invariance
Authors:
Danilo B. Liarte,
Matthew Bierbaum,
Ricardo A. Mosna,
Randall D. Kamien,
James P. Sethna
Abstract:
Smectic liquid crystals are remarkable, beautiful examples of materials microstructure, with ordered patterns of geometrically perfect ellipses and hyperbolas. The solution of the complex problem of filling three-dimensional space with domains of focal conics under constraining boundary conditions yields a set of strict rules, which are similar to the compatibility conditions in a martensitic crys…
▽ More
Smectic liquid crystals are remarkable, beautiful examples of materials microstructure, with ordered patterns of geometrically perfect ellipses and hyperbolas. The solution of the complex problem of filling three-dimensional space with domains of focal conics under constraining boundary conditions yields a set of strict rules, which are similar to the compatibility conditions in a martensitic crystal. Here we present the rules giving compatible conditions for the concentric circle domains found at two-dimensional smectic interfaces with planar boundary conditions. Using configurations generated by numerical simulations, we develop a clustering algorithm to decompose the planar boundaries into domains. The interfaces between different domains agree well with the smectic compatibility conditions. We also discuss generalizations of our approach to describe the full three-dimensional smectic domains, where the variant symmetry group is the Weyl-Poincaré group of Lorentz boosts, translations, rotations, and dilatations.
△ Less
Submitted 18 February, 2016; v1 submitted 6 November, 2015;
originally announced November 2015.
-
The Topology of Dislocations in Smectic Liquid Crystals
Authors:
Randall D. Kamien,
Ricardo A. Mosna
Abstract:
The order parameter of the smectic liquid crystal phase is the same as that of a superfluid or superconductor, namely a complex scalar field. We show that the essential difference in boundary conditions between these systems leads to a markedly different topological structure of the defects. Screw and edge defects can be distinguished topologically. This implies an invariant on an edge dislocation…
▽ More
The order parameter of the smectic liquid crystal phase is the same as that of a superfluid or superconductor, namely a complex scalar field. We show that the essential difference in boundary conditions between these systems leads to a markedly different topological structure of the defects. Screw and edge defects can be distinguished topologically. This implies an invariant on an edge dislocation loop so that smectic defects can be topologically linked not unlike defects in ordered systems with non-Abelian fundamental groups.
△ Less
Submitted 6 February, 2017; v1 submitted 24 October, 2015;
originally announced October 2015.
-
Colloidal Inclusions in Liquid Crystals
Authors:
Randall D. Kamien
Abstract:
We outline the necessary background to understand the interaction of colloids in liquid crystals through boundary conditions and topology.
We outline the necessary background to understand the interaction of colloids in liquid crystals through boundary conditions and topology.
△ Less
Submitted 22 June, 2015;
originally announced June 2015.
-
Curvature-driven, One-step Assembly of Reconfigurable Smectic Liquid Crystal "Compound Eye" Lenses
Authors:
Francesca Serra,
Mohamed A. Gharbi,
Yimin Luo,
Iris B. Liu,
Nathan D. Bade,
Randall D. Kamien,
Shu Yang,
Kathleen J. Stebe
Abstract:
Confined smectic A liquid crystals (SmA LCs) form topological defects called focal conic domains (FCDs) that focus light as gradient-index lenses. Here, we exploit surface curvature to self-assemble FCDs in a single step into a hierarchical structure (coined "flower pattern") molded by the fluid interface that is pinned at the top of a micropillar. The structure resembles the compound eyes of some…
▽ More
Confined smectic A liquid crystals (SmA LCs) form topological defects called focal conic domains (FCDs) that focus light as gradient-index lenses. Here, we exploit surface curvature to self-assemble FCDs in a single step into a hierarchical structure (coined "flower pattern") molded by the fluid interface that is pinned at the top of a micropillar. The structure resembles the compound eyes of some invertebrates, which consist of hundreds of microlenses on a curved interface, able to focus and construct images in three dimensions. Here we demonstrate that these flowers are indeed "compound eyes" with important features which have not been demonstrated previously in the literature. The eccentric FCDs gradually change in size with radial distance from the edge of the micropillar, resulting in a variable microlens focal length that ranges from a few microns to a few tens of microns within a single "flower". We show that the microlenses can construct a composite 3D image from different depth of field. Moreover, the smectic "compound eye" can be reconfigured by heating and cooling at the LC phase transition temperature; its field of view can be manipulated by tuning the curvature of the LC interface, and the lenses are sensitive to light polarization.
△ Less
Submitted 6 May, 2015;
originally announced May 2015.
-
Algorithmic Lattice Kirigami: A Route to Pluripotent Materials
Authors:
Daniel M. Sussman,
Yigil Cho,
Toen Castle,
Xingting Gong,
Euiyeon Jung,
Shu Yang,
Randall D. Kamien
Abstract:
We use a regular arrangement of kirigami elements to demonstrate an inverse design paradigm for folding a flat surface into complex target configurations. We first present a scheme using arrays of disclination defect pairs on the dual to the honeycomb lattice; by arranging these defect pairs properly with respect to each other and choosing an appropriate fold pattern a target stepped surface can b…
▽ More
We use a regular arrangement of kirigami elements to demonstrate an inverse design paradigm for folding a flat surface into complex target configurations. We first present a scheme using arrays of disclination defect pairs on the dual to the honeycomb lattice; by arranging these defect pairs properly with respect to each other and choosing an appropriate fold pattern a target stepped surface can be designed. We then present a more general method that specifies a fixed lattice of kirigami cuts to be performed on a flat sheet. This single "pluripotent" lattice of cuts permits a wide variety of target surfaces to be programmed into the sheet by changing the folding directions.
△ Less
Submitted 26 March, 2015;
originally announced March 2015.
-
Making the Cut: Lattice Kirigami Rules
Authors:
Toen Castle,
Yigil Cho,
Xingting Gong,
Euiyeon Jung,
Daniel M. Sussman,
Shu Yang,
Randall D. Kamien
Abstract:
In this paper we explore and develop a simple set of rules that apply to cutting, pasting, and folding honeycomb lattices. We consider origami-like structures that are extinsically flat away from zero-dimensional sources of Gaussian curvature and one-dimensional sources of mean curvature, and our cutting and pasting rules maintain the intrinsic bond lengths on both the lattice and its dual lattice…
▽ More
In this paper we explore and develop a simple set of rules that apply to cutting, pasting, and folding honeycomb lattices. We consider origami-like structures that are extinsically flat away from zero-dimensional sources of Gaussian curvature and one-dimensional sources of mean curvature, and our cutting and pasting rules maintain the intrinsic bond lengths on both the lattice and its dual lattice. We find that a small set of rules is allowed providing a framework for exploring and building kirigami -- folding, cutting, and pasting the edges of paper.
△ Less
Submitted 27 August, 2014;
originally announced August 2014.
-
The Geometry of the Cholesteric Phase
Authors:
Daniel A. Beller,
Thomas Machon,
Simon Čopar,
Daniel M. Sussman,
Gareth P. Alexander,
Randall D. Kamien,
Ricardo A. Mosna
Abstract:
We propose a construction of a cholesteric pitch axis for an arbitrary nematic director field as an eigenvalue problem. Our definition leads to a Frenet-Serret description of an orthonormal triad determined by this axis, the director, and the mutually perpendicular direction. With this tool we are able to compare defect structures in cholesterics, biaxial nematics, and smectics. Though they all ha…
▽ More
We propose a construction of a cholesteric pitch axis for an arbitrary nematic director field as an eigenvalue problem. Our definition leads to a Frenet-Serret description of an orthonormal triad determined by this axis, the director, and the mutually perpendicular direction. With this tool we are able to compare defect structures in cholesterics, biaxial nematics, and smectics. Though they all have similar ground state manifolds, the defect structures are different and cannot be, in general, translated from one phase to the other.
△ Less
Submitted 12 June, 2014;
originally announced June 2014.
-
Elasticity-Dependent Self-assembly of Micro-Templated Chromonic Liquid Crystal Films
Authors:
Matthew A. Lohr,
Marcello Cavallaro Jr.,
Daniel A. Beller,
Kathleen J. Stebe,
Randall D. Kamien,
Peter J. Collings,
Arjun G. Yodh
Abstract:
We explore micropatterned director structures of aqueous lyotropic chromonic liquid crystal (LCLC) films created on square lattice cylindrical-micropost substrates. The structures are manipulated by modulating the LCLC mesophases and their elastic properties via concentration through drying. Nematic LCLC films exhibit preferred bistable alignment along the diagonals of the micropost lattice. Colum…
▽ More
We explore micropatterned director structures of aqueous lyotropic chromonic liquid crystal (LCLC) films created on square lattice cylindrical-micropost substrates. The structures are manipulated by modulating the LCLC mesophases and their elastic properties via concentration through drying. Nematic LCLC films exhibit preferred bistable alignment along the diagonals of the micropost lattice. Columnar LCLC films, dried from nematics, form two distinct director and defect configurations: a diagonally aligned director pattern with local squares of defects, and an off-diagonal configuration with zig-zag defects. The formation of these states appears to be tied to the relative splay and bend free energy costs of the initial nematic films. The observed nematic and columnar configurations are understood numerically using a Landau-de Gennes free energy model. Among other attributes, the work provide first examples of quasi-2D micropatterning of LC films in the columnar phase and lyotropic LC films in general, and it demonstrates alignment and configuration switching of typically difficult-to-align LCLC films via bulk elastic properties.
△ Less
Submitted 27 February, 2014;
originally announced February 2014.
-
Saddle-splay screening and chiral symmetry breaking in toroidal nematics
Authors:
Vinzenz Koning,
Benjamin C. van Zuiden,
Randall D. Kamien,
Vincenzo Vitelli
Abstract:
We present a theoretical study of director fields in toroidal geometries with degenerate planar boundary conditions. We find spontaneous chirality: despite the achiral nature of nematics the director configuration show a handedness if the toroid is thick enough. In the chiral state the director field displays a double twist, whereas in the achiral state there is only bend deformation. The critical…
▽ More
We present a theoretical study of director fields in toroidal geometries with degenerate planar boundary conditions. We find spontaneous chirality: despite the achiral nature of nematics the director configuration show a handedness if the toroid is thick enough. In the chiral state the director field displays a double twist, whereas in the achiral state there is only bend deformation. The critical thickness increases as the difference between the twist and saddle-splay moduli grows. A positive saddle-splay modulus prefers alignment along the short circle of the bounding torus, and hence stimulates promotes a chiral configuration. The chiral-achiral transition mimics the order-disorder transition of the mean-field Ising model. The role of the magnetisation in the Ising model is played by the degree of twist. The role of the temperature is played by the aspect ratio of the torus. Remarkably, an external field does not break the chiral symmetry explicitly, but shifts the transition. In the case of toroidal cholesterics, we do find a preference for one chirality over the other -- the molecular chirality acts as a field in the Ising analogy.
△ Less
Submitted 18 December, 2013;
originally announced December 2013.
-
Focal Conic Flower Textures at Curved Interfaces
Authors:
Daniel A. Beller,
Mohamed A. Gharbi,
Apiradee Honglawan,
Kathleen J. Stebe,
Shu Yang,
Randall D. Kamien
Abstract:
Focal conic domains (FCDs) in smectic-A liquid crystals have drawn much attention both for their exquisitely structured internal form and for their ability to direct the assembly of micro- and nanomaterials in a variety of patterns. A key to directing FCD assembly is control over the eccentricity of the domain. Here, we demonstrate a new paradigm for creating spatially varying FCD eccentricity by…
▽ More
Focal conic domains (FCDs) in smectic-A liquid crystals have drawn much attention both for their exquisitely structured internal form and for their ability to direct the assembly of micro- and nanomaterials in a variety of patterns. A key to directing FCD assembly is control over the eccentricity of the domain. Here, we demonstrate a new paradigm for creating spatially varying FCD eccentricity by confining a hybrid-aligned smectic with curved interfaces. In particular, we manipulate interface behavior with colloidal particles in order to experimentally produce two examples of what has recently been dubbed the flower texture, where the focal hyperbolae diverge radially outward from the center of the texture, rather than inward as in the canonical eventail or fan texture. We explain how this unconventional assembly can arise from appropriately curved interfaces. Finally, we present a model for this system that applies the law of corresponding cones, showing how FCDs may be embedded smoothly within a "background texture" of large FCDs and concentric spherical layers, in a manner consistent with the qualitative features of the smectic flower. Such understanding could potentially lead to disruptive liquid crystal technologies beyond displays, including patterning, smart surfaces, microlens arrays, sensors and nanomanufacturing.
△ Less
Submitted 24 October, 2013;
originally announced October 2013.
-
Exploiting imperfections: Directed assembly of surface colloids via bulk topological defects
Authors:
Marcello Cavallaro Jr.,
Mohamed A. Gharbi,
Daniel A. Beller,
Simon Čopar,
Zheng Shi,
Tobias Baumgart,
Shu Yang,
Randall D. Kamien,
Kathleen J. Stebe
Abstract:
We exploit the long-ranged elastic fields inherent to confined nematic liquid crystals to assemble colloidal particles trapped at the liquid crystal interface into reconfigurable structures with complex symmetries and packings. Spherical colloids with homeotropic anchoring trapped at the interface between air and the nematic liquid crystal 5CB create quadrupolar distortions in the director field c…
▽ More
We exploit the long-ranged elastic fields inherent to confined nematic liquid crystals to assemble colloidal particles trapped at the liquid crystal interface into reconfigurable structures with complex symmetries and packings. Spherical colloids with homeotropic anchoring trapped at the interface between air and the nematic liquid crystal 5CB create quadrupolar distortions in the director field causing particles to repel and consequently form close-packed assemblies with a triangular habit. Here we report on complex, open structures organized via interactions with defects in the bulk. Specifically, by confining the nematic liquid crystal in an array of microposts with homeotropic anchoring conditions, we cause defect rings to form at well-defined locations in the bulk of the sample. These defects source elastic deformations that direct the assembly of the interfacially-trapped colloids into ring-like assemblies, which recapitulate the defect geometry even when the microposts are completely immersed in the nematic. When the surface density of the colloids is high, they form a ring near the defect and a hexagonal lattice far from it. Since topographically complex substrates are easily fabricated and liquid crystal defects are readily reconfigured, this work lays the foundation for a new, robust mechanism to dynamically direct assembly over large areas by controlling surface anchoring and associated bulk defect structure.
△ Less
Submitted 24 September, 2013; v1 submitted 11 August, 2013;
originally announced August 2013.
-
Ring around the colloid
Authors:
Marcello Cavallaro Jr.,
Mohamed A. Gharbi,
Daniel A. Beller,
Simon Čopar,
Zheng Shi,
Randall D. Kamien,
Shu Yang,
Tobias Baumgart,
Kathleen J. Stebe
Abstract:
In this work, we show that Janus washers, genus-one colloids with hybrid anchoring conditions, form topologically required defects in nematic liquid crystals. Experiments under crossed polarizers reveal the defect structure to be a rigid disclination loop confined within the colloid, with an accompanying defect in the liquid crystal. When confined to a homeotropic cell, the resulting colloid-defec…
▽ More
In this work, we show that Janus washers, genus-one colloids with hybrid anchoring conditions, form topologically required defects in nematic liquid crystals. Experiments under crossed polarizers reveal the defect structure to be a rigid disclination loop confined within the colloid, with an accompanying defect in the liquid crystal. When confined to a homeotropic cell, the resulting colloid-defect ring pair tilts relative to the far field director, in contrast to the behavior of toroidal colloids with purely homeotropic anchoring. We show that this tilting behavior can be reversibly suppressed by the introduction of a spherical colloid into the center of the toroid, creating a new kind of multi-shape colloidal assemblage.
△ Less
Submitted 8 June, 2013; v1 submitted 28 April, 2013;
originally announced April 2013.
-
Singular Values, Nematic Disclinations, and Emergent Biaxiality
Authors:
Simon Čopar,
Mark R. Dennis,
Randall D. Kamien,
Slobodan Žumer
Abstract:
Both uniaxial and biaxial nematic liquid crystals are defined by orientational ordering of their building blocks. While uniaxial nematics only orient the long molecular axis, biaxial order implies local order along three axes. As the natural degree of biaxiality and the associated frame, that can be extracted from the tensorial description of the nematic order, vanishes in the uniaxial phase, we e…
▽ More
Both uniaxial and biaxial nematic liquid crystals are defined by orientational ordering of their building blocks. While uniaxial nematics only orient the long molecular axis, biaxial order implies local order along three axes. As the natural degree of biaxiality and the associated frame, that can be extracted from the tensorial description of the nematic order, vanishes in the uniaxial phase, we extend the nematic director to a full biaxial frame by making use of a singular value decomposition of the gradient of the director field instead. New defects and degrees of freedom are unveiled and the similarities and differences between the uniaxial and biaxial phase are analyzed by applying the algebraic rules of the quaternion group to the uniaxial phase.
△ Less
Submitted 14 February, 2013; v1 submitted 13 February, 2013;
originally announced February 2013.
-
Threading the Needle: Generating Textures in Nematics
Authors:
Bryan Gin-ge Chen,
Paul J. Ackerman,
Gareth P. Alexander,
Randall D. Kamien,
Ivan I. Smalyukh
Abstract:
The Hopf fibration is an example of a texture: a topologically stable, smooth, global configuration of a field. Here we demonstrate the controlled sculpting of the Hopf fibration in nematic liquid crystals through the control of point defects. We demonstrate how these are related to torons by use of a topological visualization technique derived from the Pontryagin-Thom construction.
The Hopf fibration is an example of a texture: a topologically stable, smooth, global configuration of a field. Here we demonstrate the controlled sculpting of the Hopf fibration in nematic liquid crystals through the control of point defects. We demonstrate how these are related to torons by use of a topological visualization technique derived from the Pontryagin-Thom construction.
△ Less
Submitted 30 December, 2012;
originally announced December 2012.
-
Micro-Bullet Assembly: Interactions of Oriented Dipoles in Confined Nematic Liquid Crystal
Authors:
Mohamed Amine Gharbi,
Marcello Cavallaro, Jr.,
Gaoxiang Wu,
Daniel A. Beller,
Randall D. Kamien,
Shu Yang,
Kathleen J. Stebe
Abstract:
Microbullet particles, cylinders with one blunt and one spherical end, offer a novel platform to study the effects of anisotropy and curvature on colloidal assembly in complex fluids. Here, we disperse microbullets in 4-cyano-4'-pentylbiphenyl (5CB) nematic liquid crystal (NLC) cells and form oriented elastic dipoles with a nematic point defect located near the curved end. This feature allows us t…
▽ More
Microbullet particles, cylinders with one blunt and one spherical end, offer a novel platform to study the effects of anisotropy and curvature on colloidal assembly in complex fluids. Here, we disperse microbullets in 4-cyano-4'-pentylbiphenyl (5CB) nematic liquid crystal (NLC) cells and form oriented elastic dipoles with a nematic point defect located near the curved end. This feature allows us to study particle interactions as a function of dipole alignment. By careful control of the surface anchoring at the particle surface and the confining boundaries, we study the interactions and assembly of microbullets under various conditions. When microbullets with homeotropic surface anchoring are dispersed in a planar cell, parallel dipoles form linear chains parallel to the director, similar to the observations of spherical particles in a planar cell, while antiparallel dipoles orient side-to-side. In a homeotropic cell, however, particles rotate to orient their long axis parallel to the director. When so aligned, parallel dipoles repel and form 2D ordered assemblies with hexagonal symmetry that ripen over time owing to attraction between antiparallel neighbors. Further, we show that the anchoring conditions inside the cell can be altered by application of an electrical field, allowing us to flip microbullets to orient parallel to the director, an effect driven by an elastic torque. Finally, we detail the mechanisms that control the formation of 1D chains and hexagonal lattices with respect to the elasticity of the NLC.
△ Less
Submitted 3 January, 2013; v1 submitted 5 October, 2012;
originally announced October 2012.
-
Patterns on a Roll: A Method for Continuous Feed Nanoprinting
Authors:
Elisabetta A. Matsumoto,
Randall D. Kamien
Abstract:
Exploiting elastic instability in thin films has proven a robust method for creating complex patterns and structures across a wide range of lengthscales. Even the simplest of systems, an elastic membrane with a lattice of pores, under mechanical strain, generates complex patterns featuring long-range orientational order. When we promote this system to a curved surface, in particular, a cylindrical…
▽ More
Exploiting elastic instability in thin films has proven a robust method for creating complex patterns and structures across a wide range of lengthscales. Even the simplest of systems, an elastic membrane with a lattice of pores, under mechanical strain, generates complex patterns featuring long-range orientational order. When we promote this system to a curved surface, in particular, a cylindrical membrane, a novel set of features, patterns and broken symmetries appears. The newfound periodicity of the cylinder allows for a novel continuous method for nanoprinting.
△ Less
Submitted 3 July, 2012;
originally announced July 2012.
-
Breaking the Rules for Topological Defects: Smectic Order on Conical Substrates
Authors:
Ricardo A. Mosna,
Daniel A. Beller,
Randall D. Kamien
Abstract:
Ordered phases on curved substrates experience a complex interplay of ordering and intrinsic curvature, commonly producing frustration and singularities. This is an especially important issue in crystals as ever-smaller scale materials are grown on real surfaces; eventually, surface imperfections are on the same scale as the lattice constant. Here, we gain insights into this general problem by stu…
▽ More
Ordered phases on curved substrates experience a complex interplay of ordering and intrinsic curvature, commonly producing frustration and singularities. This is an especially important issue in crystals as ever-smaller scale materials are grown on real surfaces; eventually, surface imperfections are on the same scale as the lattice constant. Here, we gain insights into this general problem by studying two-dimensional smectic order on substrates with highly localized intrinsic curvature, constructed from cones and their intersections with planes. In doing so we take advantage of fully tractable "paper and tape" constructions, allowing us to understand, in detail, the induced cusps and singularities.
△ Less
Submitted 18 July, 2012; v1 submitted 14 May, 2012;
originally announced May 2012.
-
Conformal Smectics and their Many Metrics
Authors:
Gareth P. Alexander,
Randall D. Kamien,
Ricardo A. Mosna
Abstract:
We establish that equally-spaced smectic configurations enjoy an infinite-dimensional conformal symmetry and show that there is a natural map between them and null hypersurfaces in maximally-symmetric spacetimes. By choosing the appropriate conformal factor it is possible to restore additional symmetries of focal structures only found before for smectics on flat substrates.
We establish that equally-spaced smectic configurations enjoy an infinite-dimensional conformal symmetry and show that there is a natural map between them and null hypersurfaces in maximally-symmetric spacetimes. By choosing the appropriate conformal factor it is possible to restore additional symmetries of focal structures only found before for smectics on flat substrates.
△ Less
Submitted 1 May, 2012; v1 submitted 30 November, 2011;
originally announced November 2011.
-
Developed Smectics: When Exact Solutions Agree
Authors:
Gareth P. Alexander,
Randall D. Kamien,
Christian D. Santangelo
Abstract:
In the limit where the bending modulus vanishes, we construct layer configurations with arbitrary dislocation textures by exploiting a connection between uniformly-spaced layers in two dimensions and developable surfaces in three dimensions. We then show how these focal textures can be used to construct layer configurations with finite bending modulus.
In the limit where the bending modulus vanishes, we construct layer configurations with arbitrary dislocation textures by exploiting a connection between uniformly-spaced layers in two dimensions and developable surfaces in three dimensions. We then show how these focal textures can be used to construct layer configurations with finite bending modulus.
△ Less
Submitted 19 October, 2011;
originally announced October 2011.
-
Smectic Pores and Defect Cores
Authors:
Elisabetta A. Matsumoto,
Christian D. Santangelo,
Randall D. Kamien
Abstract:
Riemann's minimal surfaces are a complete, embeddable, one-parameter family of minimal surfaces with translational symmetry along one direction. It's infinite number of planar ends are joined together by an array of necks, closely matching the morphology of a bicontinuous, lamellar system with pores connecting alternating layers. We demonstrate explicitly that Riemann's minimal surfaces are compos…
▽ More
Riemann's minimal surfaces are a complete, embeddable, one-parameter family of minimal surfaces with translational symmetry along one direction. It's infinite number of planar ends are joined together by an array of necks, closely matching the morphology of a bicontinuous, lamellar system with pores connecting alternating layers. We demonstrate explicitly that Riemann's minimal surfaces are composed of a nonlinear sum of two oppositely-handed helicoids. This description is particularly appropriate for describing smectic liquid crystals containing two screw dislocations.
△ Less
Submitted 4 October, 2011;
originally announced October 2011.
-
Disclination Loops, Hedgehogs, and All That
Authors:
Gareth P. Alexander,
Bryan Gin-ge Chen,
Elisabetta A. Matsumoto,
Randall D. Kamien
Abstract:
The homotopy theory of topological defects is a powerful tool for organizing and unifying many ideas across a broad range of physical systems. Recently, experimental progress has been made in controlling and measuring colloidal inclusions in liquid crystalline phases. The topological structure of these systems is quite rich but, at the same time, subtle. Motivated by experiment and the power of to…
▽ More
The homotopy theory of topological defects is a powerful tool for organizing and unifying many ideas across a broad range of physical systems. Recently, experimental progress has been made in controlling and measuring colloidal inclusions in liquid crystalline phases. The topological structure of these systems is quite rich but, at the same time, subtle. Motivated by experiment and the power of topological reasoning, we review and expound upon the classification of defects in uniaxial nematic liquid crystals. Particular attention is paid to the ambiguities that arise in these systems, which have no counterpart in the much-storied XY model or the Heisenberg ferromagnet.
△ Less
Submitted 6 July, 2011;
originally announced July 2011.
-
From Lumps to Lattices: Crystallized Clots Made Simple
Authors:
P. Ziherl,
Randall D. Kamien
Abstract:
Using a minimal model based on the continuum theory of a 2D hard-core/square-shoulder ensemble, we reinterpret the main features of cluster mesophases formed by colloids with soft concave repulsive interactions. We rederive the lattice spacing, the binding energy and the phase diagram. We also extend the clustering criterion [Likos, C. N., et al., Phys. Rev. E, 2001, 63, 031206; Glaser, M. A., et…
▽ More
Using a minimal model based on the continuum theory of a 2D hard-core/square-shoulder ensemble, we reinterpret the main features of cluster mesophases formed by colloids with soft concave repulsive interactions. We rederive the lattice spacing, the binding energy and the phase diagram. We also extend the clustering criterion [Likos, C. N., et al., Phys. Rev. E, 2001, 63, 031206; Glaser, M. A., et al. EPL 2007, 78, 46004] to include the effect of the hard cores, which precludes the formation of clusters at small densities.
△ Less
Submitted 10 January, 2011; v1 submitted 27 September, 2010;
originally announced September 2010.
-
The Power of Poincaré: Elucidating the Hidden Symmetries in Focal Conic Domains
Authors:
Gareth P. Alexander,
Bryan Gin-ge Chen,
Elisabetta A. Matsumoto,
Randall D. Kamien
Abstract:
Focal conic domains are typically the "smoking gun" by which smectic liquid crystalline phases are identified. The geometry of the equally-spaced smectic layers is highly generic but, at the same time, difficult to work with. In this Letter we develop an approach to the study of focal sets in smectics which exploits a hidden Poincaré symmetry revealed only by viewing the smectic layers as projec…
▽ More
Focal conic domains are typically the "smoking gun" by which smectic liquid crystalline phases are identified. The geometry of the equally-spaced smectic layers is highly generic but, at the same time, difficult to work with. In this Letter we develop an approach to the study of focal sets in smectics which exploits a hidden Poincaré symmetry revealed only by viewing the smectic layers as projections from one-higher dimension. We use this perspective to shed light upon several classic focal conic textures, including the concentric cyclides of Dupin, polygonal textures and tilt-grain boundaries.
△ Less
Submitted 3 April, 2010;
originally announced April 2010.
-
Helical Packings and Phase Transformations of Soft Spheres in Cylinders
Authors:
Matthew A. Lohr,
Ahmed M. Alsayed,
Bryan G. Chen,
Zexin Zhang,
Randall D. Kamien,
Arjun G. Yodh
Abstract:
The phase behavior of helical packings of thermoresponsive microspheres inside glass capillaries is studied as a function of volume fraction. Stable packings with long-range orientational order appear to evolve abruptly to disordered states as particle volume fraction is reduced, consistent with recent hard sphere simulations. We quantify this transition using correlations and susceptibilities of…
▽ More
The phase behavior of helical packings of thermoresponsive microspheres inside glass capillaries is studied as a function of volume fraction. Stable packings with long-range orientational order appear to evolve abruptly to disordered states as particle volume fraction is reduced, consistent with recent hard sphere simulations. We quantify this transition using correlations and susceptibilities of the orientational order parameter psi_6. The emergence of coexisting metastable packings, as well as coexisting ordered and disordered states, is also observed. These findings support the notion of phase transition-like behavior in quasi-1D systems.
△ Less
Submitted 2 April, 2010;
originally announced April 2010.