-
The Focal-plane Actualized Shifted Technique Realized for a Shack Hartmann Wavefront Sensor (fastrSHWFS)
Authors:
Benjamin L. Gerard,
Aaron Lemmer,
Bautista R. Fernandez,
Xiaoxing Xia,
Cesar Laguna,
Mike Kim,
Stephen Mark Ammons,
Brian Bauman,
Lisa Poyneer
Abstract:
Astronomical adaptive optics (AO) is a critical approach to enable ground-based diffraction-limited imaging and high contrast science, with the potential to enable habitable exoplanet imaging on future extremely large telescopes. However, AO systems must improve significantly to enable habitable exoplanet imaging. Time lag between the end of an exposure and end of deformable mirror commands being…
▽ More
Astronomical adaptive optics (AO) is a critical approach to enable ground-based diffraction-limited imaging and high contrast science, with the potential to enable habitable exoplanet imaging on future extremely large telescopes. However, AO systems must improve significantly to enable habitable exoplanet imaging. Time lag between the end of an exposure and end of deformable mirror commands being applied in an AO loop is now the dominant error term in many extreme AO systems (e.g., Poyneer et al. 2016), and within that lag component detector read time is becoming non-negligible (e.g., Cetre et al. 2018). This term will decrease as faster detector readout capabilities are developed by vendors. In complement, we have developed a modified Shack Hartmann Wavefront Sensor (SHWFS) to address this problem called the Focal-plane Actualized Shifted Technique Realized for a SHWFS (fastrSHWFS). The novelty of this design is to replace the usual lenslet array with a bespoke pupil-plane phase mask that redistributes the spot pattern on the detector into a rectangular array with a custom aspect ratio (in an extreme case, if the detector size can accommodate it, the array can be a single line). We present the fastrSHWFS concept and preliminary laboratory tests. For some detectors and AO systems, the fastrSHWFS technique can decrease the read time per frame compared to a regular SHWFS by up to 30x, supporting the goal of reduced AO lag needed to eventually enable habitable exoplanet imaging.
△ Less
Submitted 14 June, 2024;
originally announced June 2024.
-
Analyzing Variation in Phase Delays Across Phase Plates With a Quadrature Polarization Interferometer
Authors:
Cesar Laguna
Abstract:
In order for telescopes to obtain good and precise images they need to see through atmospheric turbulence. To accomplish this and compensate for atmospheric turbulence we use Adaptive Optics technologies. In this thesis we analyze the variations in phase delays across phase plates which simulate atmospheric turbulence in order to characterize them and determine how well these phase plates reproduc…
▽ More
In order for telescopes to obtain good and precise images they need to see through atmospheric turbulence. To accomplish this and compensate for atmospheric turbulence we use Adaptive Optics technologies. In this thesis we analyze the variations in phase delays across phase plates which simulate atmospheric turbulence in order to characterize them and determine how well these phase plates reproduce the phase delay variation of the atmosphere. This experiment was conducted using the Quadrature Polarization Interferometer (QPI) testbed in the Lab of Adaptive Optics (LAO) at the University of California Santa Cruz (UCSC). Using the QPI lab setup allowed us to be able to develop and refine a final algorithm for determining the phase delay of the phase plates. The characterization of the phase plates was accomplished by using the interference patterns between a test and reference path and measuring their pathlength variations. This was achieved by calculating the intensity of the two paths of the Helium-Neon (HeNe) laser, modifying those values in order to obtain phase values between the beam, and from the phase values we are able to determine the path length variations, or phase delays, of the phase plates. This allows us to determine Fried's parameter, $r_o$, by analyzing any given separation on the phase plate and determining the path length variations between those separations.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
Deformable mirror-based pupil chopping for exoplanet imaging and adaptive optics
Authors:
Javier Perez Soto,
Cesar Laguna,
Benjamin L. Gerard,
Anne Dattilo,
Vincent Chambouleyron,
Rebecca Jensen-Clem
Abstract:
Due to turbulence in the atmosphere images taken from ground-based telescopes become distorted. With adaptive optics (AO) images can be given greater clarity allowing for better observations with existing telescopes and are essential for ground-based coronagraphic exoplanet imaging instruments. A disadvantage to many AO systems is that they use sensors that can not correct for non-common path aber…
▽ More
Due to turbulence in the atmosphere images taken from ground-based telescopes become distorted. With adaptive optics (AO) images can be given greater clarity allowing for better observations with existing telescopes and are essential for ground-based coronagraphic exoplanet imaging instruments. A disadvantage to many AO systems is that they use sensors that can not correct for non-common path aberrations. We have developed a new focal plane wavefront sensing technique to address this problem called deformable mirror (DM)-based pupil chopping. The process involves a coronagraphic or non-coronagraphic science image and a deformable mirror, which modulates the phase by applying a local tip/tilt every other frame which enables correcting for leftover aberrations in the wavefront after a conventional AO correction. We validate this technique with both simulations (for coronagraphic and non-coronagraphic images) and testing (for non-coronagraphic images) on UCSC's Santa Cruz Extreme AO Laboratory (SEAL) testbed. We demonstrate that with as low as 250 nm of DM stroke to apply the local tip/tilt this wavefront sensor is linear for low-order Zernike modes and enables real-time control, in principle up to kHz speeds to correct for residual atmospheric turbulence.
△ Less
Submitted 28 August, 2023;
originally announced August 2023.
-
Daytime calibration and testing of the Keck All sky Precision Adaptive Optics Tomography System
Authors:
Avinash Surendran,
Jacques R. Delorme,
Carlos M. Correia,
Steve Doyle,
Sam Ragland,
Paul Richards,
Peter Wizinowich,
Philip M. Hinz,
Daren Dillon,
Cesar Laguna,
Sylvain Cetre,
Scott Lilley,
Ed Wetherell,
Jason C. Y. Chin,
Eduardo Marin
Abstract:
The development of the Keck All sky Precision Adaptive optics (KAPA) project was initiated in September 2018 to upgrade the Keck I adaptive optics (AO) system to enable laser tomography adaptive optics (LTAO) with a four laser guide star (LGS) asterism. The project includes the replacement of the existing LMCT laser with a Toptica laser, the implementation of a new real-time controller (RTC) and w…
▽ More
The development of the Keck All sky Precision Adaptive optics (KAPA) project was initiated in September 2018 to upgrade the Keck I adaptive optics (AO) system to enable laser tomography adaptive optics (LTAO) with a four laser guide star (LGS) asterism. The project includes the replacement of the existing LMCT laser with a Toptica laser, the implementation of a new real-time controller (RTC) and wavefront sensor optics and camera, and a new daytime calibration and test platform to provide the required infrastructure for laser tomography. The work presented here describes the new daytime calibration infrastructure to test the performance for the KAPA tomographic algorithms. This paper outlines the hardware infrastructure for daytime calibration and performance assessment of tomographic algorithms. This includes the implementation of an asterism simulator having fiber-coupled light sources simulating four Laser Guide Stars (LGS) and two Natural Guide Stars (NGS) at the AO bench focus, as well as the upgrade of the existing TelSim on the AO bench to simulate focal anisoplanatism and wind driven atmospheric turbulence. A phase screen, that can be adjusted in effective altitude, is used to simulate wind speeds up to 10 m/s for a duration of upto 3 s.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
The Santa Cruz Extreme AO Lab (SEAL): Design and First Light
Authors:
Rebecca Jensen-Clem,
Daren Dillon,
Benjamin Gerard,
M. A. M. van Kooten,
J. Fowler,
Renate Kupke,
Sylvain Cetre,
Dominic Sanchez,
Phil Hinz,
Cesar Laguna,
David Doelman,
Frans Snik
Abstract:
The Santa Cruz Extreme AO Lab (SEAL) is a new visible-wavelength testbed designed to advance the state of the art in wavefront control for high contrast imaging on large, segmented, ground-based telescopes. SEAL provides multiple options for simulating atmospheric turbulence, including rotating phase plates and a custom Meadowlark spatial light modulator that delivers phase offsets of up to 6pi at…
▽ More
The Santa Cruz Extreme AO Lab (SEAL) is a new visible-wavelength testbed designed to advance the state of the art in wavefront control for high contrast imaging on large, segmented, ground-based telescopes. SEAL provides multiple options for simulating atmospheric turbulence, including rotating phase plates and a custom Meadowlark spatial light modulator that delivers phase offsets of up to 6pi at 635nm. A 37-segment IrisAO deformable mirror (DM) simulates the W. M. Keck Observatory segmented primary mirror. The adaptive optics system consists of a woofer/tweeter deformable mirror system (a 97-actuator ALPAO DM and 1024-actuator Boston Micromachines MEMs DM, respectively), and four wavefront sensor arms: 1) a high-speed Shack-Hartmann WFS, 2) a reflective pyramid WFS, designed as a prototype for the ShaneAO system at Lick Observatory, 3) a vector-Zernike WFS, and 4) a Fast Atmospheric Self Coherent Camera Technique (FAST) demonstration arm, consisting of a custom focal plane mask and high-speed sCMOS detector. Finally, science arms preliminarily include a classical Lyot-style coronagraph as well as FAST (which doubles as a WFS and science camera). SEAL's real time control system is based on the Compute and Control for Adaptive optics (CACAO) package, and is designed to support the efficient transfer of software between SEAL and the Keck II AO system. In this paper, we present an overview of the design and first light performance of SEAL.
△ Less
Submitted 7 September, 2021;
originally announced September 2021.
-
Performance of Large-Format Deformable Mirrors Constructed with TNO Variable Reluctance Actuators
Authors:
Rachel Bowens-Rubin,
Philip Hinz,
Wouter Jonker,
Stefan Kuiper,
Cesar Laguna,
Matthew Maniscalco
Abstract:
Advancements in making high-efficiency actuators are an enabling technology for building the next generation of large-format deformable mirrors. The Netherlands Organization for Applied Scientific Research (TNO) has developed a new style of variable-reluctance actuator that requires approximately eighty times less power to operate as compared to the traditional style of voice-coil actuators. We pr…
▽ More
Advancements in making high-efficiency actuators are an enabling technology for building the next generation of large-format deformable mirrors. The Netherlands Organization for Applied Scientific Research (TNO) has developed a new style of variable-reluctance actuator that requires approximately eighty times less power to operate as compared to the traditional style of voice-coil actuators. We present the performance results from laboratory testing of TNO's 57-actuator large-format deformable mirror from measuring the influence functions, linearity, hysteresis, natural shape flattening, actuator cross-coupling, creep, repeatability, and actuator lifetime. We measure a linearity of 99.4 +- 0.33% and hysteresis of 2.10 +- 0.23% over a stroke of 10 microns, indicating that this technology has strong potential for use in on-sky adaptive secondary mirrors (ASMs). We summarize plans for future lab prototypes and ASMs that will further demonstrate this technology.
△ Less
Submitted 13 December, 2020;
originally announced December 2020.
-
Physical Parameters of the Multi-Planet Systems HD 106315 and GJ 9827
Authors:
Molly R. Kosiarek,
David A. Berardo,
Ian J. M. Crossfield,
Cesar Laguna,
Caroline Piaulet,
Joseph M. Akana Murphy,
Steve B. Howell,
Gregory W. Henry,
Howard Isaacson,
Benjamin Fulton,
Lauren M. Weiss,
Erik A. Petigura,
Aida Behmard,
Lea A. Hirsch,
Johanna Teske,
Jennifer A. Burt,
Sean M. Mills,
Ashley Chontos,
Teo Mocnik,
Andrew W. Howard,
Michael Werner,
John H. Livingston,
Jessica Krick,
Charles Beichman,
Varoujan Gorjian
, et al. (20 additional authors not shown)
Abstract:
HD 106315 and GJ 9827 are two bright, nearby stars that host multiple super-Earths and sub-Neptunes discovered by K2 that are well suited for atmospheric characterization. We refined the planets' ephemerides through Spitzer transits, enabling accurate transit prediction required for future atmospheric characterization through transmission spectroscopy. Through a multi-year high-cadence observing c…
▽ More
HD 106315 and GJ 9827 are two bright, nearby stars that host multiple super-Earths and sub-Neptunes discovered by K2 that are well suited for atmospheric characterization. We refined the planets' ephemerides through Spitzer transits, enabling accurate transit prediction required for future atmospheric characterization through transmission spectroscopy. Through a multi-year high-cadence observing campaign with Keck/HIRES and Magellan/PFS, we improved the planets' mass measurements in anticipation of HST transmission spectroscopy. For GJ 9827, we modeled activity-induced radial velocity signals with a Gaussian process informed from the Calcium II H&K lines in order to more accurately model the effect of stellar noise on our data. We found planet masses of M$_b$=$4.87\pm 0.37$ M$_\oplus$, M$_c$=$1.92\pm 0.49$ M$_\oplus$, and M$_d$=$3.42\pm 0.62$ M$_\oplus$. For HD 106315, we found that such activity-radial velocity decorrelation was not effective due to the reduced presence of spots and speculate that this may extend to other hot stars as well (T$_{\rm {eff}}>6200$ K). We found planet masses of M$_b$=$10.5\pm 3.1$ M$_\oplus$ and M$_c$=$12.0\pm 3.8$ M$_\oplus$. We investigated all of the planets' compositions through comparing their masses and radii to a range of interior models. GJ 9827 b and GJ 9827 c are both consistent with an Earth-like rocky composition, GJ 9827 d and HD 106315 b both require additional volatiles and are consistent with moderate amounts of water or hydrogen/helium, and HD 106315 c is consistent with 10% hydrogen/helium surrounding an Earth-like rock and iron core.
△ Less
Submitted 4 January, 2021; v1 submitted 7 September, 2020;
originally announced September 2020.
