-
Decoupling elasticity and electrical conductivity of carbon black gels filled with insulating non-Brownian grains
Authors:
Thomas Larsen,
John R. Royer,
Fraser H. J. Laidlaw,
Wilson C. K. Poon,
Tom Larsen,
Søren J. Andreasen,
Jesper de C. Christiansen
Abstract:
A unique bistable transition has been identified in granular/colloidal gel-composites, resulting from shear-induced phase separation of the gel phase into dense blobs. In energy applications, it is critical to understand how this transition influences electrical performance. Mixing conductive colloids with conductive inclusions, we find the conductivity and elasticity move in concert, both decreas…
▽ More
A unique bistable transition has been identified in granular/colloidal gel-composites, resulting from shear-induced phase separation of the gel phase into dense blobs. In energy applications, it is critical to understand how this transition influences electrical performance. Mixing conductive colloids with conductive inclusions, we find the conductivity and elasticity move in concert, both decreasing in the collapsed phase-separated state. Surprisingly, with insulating inclusions these properties can become decoupled, with the conductivity instead increasing despite the collapse of the gel structure.
△ Less
Submitted 13 August, 2024; v1 submitted 11 May, 2024;
originally announced May 2024.
-
Fresh Cement as a Frictional Non-Brownian Suspension
Authors:
James A. Richards,
Hao Li,
Rory E. O'Neill,
Fraser H. J. Laidlaw,
John R. Royer
Abstract:
Cement is an essential construction material due to its ability to flow before later setting, however the rheological properties must be tightly controlled. Despite this, much understanding remains empirical. Using a combination of continuous and oscillatory shear flow, we compare fresh Portland cement suspensions to previous measurements on model non-Brownian suspensions to gain a micro-physical…
▽ More
Cement is an essential construction material due to its ability to flow before later setting, however the rheological properties must be tightly controlled. Despite this, much understanding remains empirical. Using a combination of continuous and oscillatory shear flow, we compare fresh Portland cement suspensions to previous measurements on model non-Brownian suspensions to gain a micro-physical understanding. Comparing steady and small-amplitude oscillatory shear, we reveal two distinct jamming concentrations, $φ_μ$ and $φ_{\rm rcp}$, where the respective yield stresses diverge. As in model suspensions, the steady-shear jamming point is notably below the oscillatory jamming point, $φ_μ < φ_{\rm rcp}$, suggesting that it is tied to frictional particle contacts. These results indicate that recently established models for the rheology of frictional, adhesive non-Brownian suspensions can be applied to fresh cement pastes, offering a new framework to understand the role of additives and fillers. Such micro-physical understanding can guide formulation changes to improve performance and reduce environmental impact.
△ Less
Submitted 17 January, 2024;
originally announced January 2024.
-
Controlling the rheo-electric properties of graphite/carbon black suspensions by 'flow-switching'
Authors:
Thomas Larsen,
John R. Royer,
Fraser H. J. Laidlaw,
Wilson C. K. Poon,
Tom Larsen,
Søren J. Andreasen,
Jesper de C. Christiansen
Abstract:
The ability to manipulate rheological and electrical properties of colloidal carbon black gels makes them attractive in composites for energy applications such as batteries and fuel cells, where they conduct electricity and prevent sedimentation of `granular' active components. While it is commonly assumed that granular fillers have a simple additive effect on the composite properties, new phenome…
▽ More
The ability to manipulate rheological and electrical properties of colloidal carbon black gels makes them attractive in composites for energy applications such as batteries and fuel cells, where they conduct electricity and prevent sedimentation of `granular' active components. While it is commonly assumed that granular fillers have a simple additive effect on the composite properties, new phenomena can emerge unexpectedly, with some composites exhibiting a unique rheological bi-stability between solid-like and liquid-like states. Here we report such bi-stability in suspensions of non-Brownian graphite and colloidal carbon black in oil, a model system to mimic composite suspensions for energy applications. Steady shear below a critical stress elicits a transition to a persistent mechanically weak and poorly conducting state, which must be `rejuvenated' using high-stress shear to recover a stronger, high-conductivity state. Our findings highlight the highly tunable nature of binary granular/gel composite suspensions, and present new possibilities for optimizing mixing and processing conditions for Li-ion battery slurries.
△ Less
Submitted 9 November, 2023;
originally announced November 2023.
-
SHIMM: A Versatile Seeing Monitor for Astronomy
Authors:
Saavidra Perera,
Richard W. Wilson,
Tim Butterley,
James Osborn,
Ollie J. D. Farley,
Douglas J. Laidlaw
Abstract:
Characterisation of atmospheric optical turbulence is crucial for the design and operation of modern ground-based optical telescopes. In particular, the effective application of adaptive optics correction on large and extremely large telescopes relies on a detailed knowledge of the prevailing atmospheric conditions, including the vertical profile of the optical turbulence strength and the atmosphe…
▽ More
Characterisation of atmospheric optical turbulence is crucial for the design and operation of modern ground-based optical telescopes. In particular, the effective application of adaptive optics correction on large and extremely large telescopes relies on a detailed knowledge of the prevailing atmospheric conditions, including the vertical profile of the optical turbulence strength and the atmospheric coherence timescale. The Differential Image Motion Monitor (DIMM) has been employed as a facility seeing monitor at many astronomical observing sites across the world for several decades, providing a reliable estimate of the seeing angle. Here we present the Shack-Hartmann Image Motion Monitor (SHIMM), which is a development of the DIMM instrument, in that it exploits differential image motion measurements of bright target stars. However, the SHIMM employs a Shack-Hartmann wavefront sensor in place of the two-hole aperture mask utilised by the DIMM. This allows the SHIMM to provide an estimate of the seeing, unbiased by shot noise or scintillation effects. The SHIMM also produces a low-resolution (three-layer) measure of the vertical turbulence profile, as well as an estimate of the coherence timescale. The SHIMM is designed as a low-cost, portable, instrument. It is comprised of off-the-shelf components so that it is easy to duplicate and well-suited for comparisons of atmospheric conditions within and between different observing sites. Here, the SHIMM design and methodology for estimating key atmospheric parameters will be presented, as well as initial field test results with comparisons to the Stereo-SCIDAR instrument.
△ Less
Submitted 28 February, 2023;
originally announced March 2023.
-
Design and CT imaging of Casper, an anthropomorphic breathing thorax phantom
Authors:
Josie Laidlaw,
Nicolas Earl,
Nihal Shavdia,
Rayna Davis,
Sarah Mayer,
Dmitri Karaman,
Devon Richtsmeier,
Pierre-Antoine Rodesch,
Magdalena Bazalova-Carter
Abstract:
The goal of this work was to build an anthropomorphic thorax phantom capable of breathing motion with materials mimicking human tissues in x-ray imaging applications. The thorax phantom, named Casper, was composed of resin (body), foam (lungs), glow polyactic acid (bones) and natural polyactic acid (tumours placed in the lungs). X-ray attenuation properties of all materials prior to manufacturing…
▽ More
The goal of this work was to build an anthropomorphic thorax phantom capable of breathing motion with materials mimicking human tissues in x-ray imaging applications. The thorax phantom, named Casper, was composed of resin (body), foam (lungs), glow polyactic acid (bones) and natural polyactic acid (tumours placed in the lungs). X-ray attenuation properties of all materials prior to manufacturing were evaluated by means of photon-counting computed tomography (CT) imaging on a table-top system. Breathing motion was achieved by a scotch-yoke mechanism with diaphragm motion frequencies of 10 - 20 rpm and displacements of 1 to 2 cm. Casper was manufactured by means of 3D printing of moulds and ribs and assembled in a complex process. The final phantom was then scanned using a clinical CT scanner to evaluate material CT numbers and the extent of tumour motion. Casper CT numbers were close to human CT numbers for soft tissue (46 HU), ribs (125 HU), lungs (-840 HU) and tumours (-45 HU). For a 2 cm diaphragm displacement the largest tumour displacement was 0.7 cm. The five tumour volumes were accurately assessed in the static CT images with a mean absolute error of 4.3%. Tumour sizes were either underestimated for smaller tumours or overestimated for larger tumours in dynamic CT images due to motion blurring with a mean absolute difference from true volumes of 10.3%.
△ Less
Submitted 28 September, 2022;
originally announced September 2022.
-
Optimizing the accuracy and efficiency of optical turbulence profiling using adaptive optics telemetry for extremely large telescopes
Authors:
Douglas J Laidlaw,
James Osborn,
Timothy J Morris,
Alastair G Basden,
Olivier Beltramo-Martin,
Timothy Butterley,
Eric Gendron,
Andrew P Reeves,
Gérard Rousset,
Matthew J Townson,
Richard W Wilson
Abstract:
Advanced adaptive optics (AO) instruments on ground-based telescopes require accurate knowledge of the atmospheric turbulence strength as a function of altitude. This information assists point spread function reconstruction, AO temporal control techniques and is required by wide-field AO systems to optimize the reconstruction of an observed wavefront. The variability of the atmosphere makes it imp…
▽ More
Advanced adaptive optics (AO) instruments on ground-based telescopes require accurate knowledge of the atmospheric turbulence strength as a function of altitude. This information assists point spread function reconstruction, AO temporal control techniques and is required by wide-field AO systems to optimize the reconstruction of an observed wavefront. The variability of the atmosphere makes it important to have a measure of the optical turbulence profile in real time. This measurement can be performed by fitting an analytically generated covariance matrix to the cross-covariance of Shack-Hartmann wavefront sensor (SHWFS) centroids. In this study we explore the benefits of reducing cross-covariance data points to a covariance map region of interest (ROI). A technique for using the covariance map ROI to measure and compensate for SHWFS misalignments is also introduced. We compare the accuracy of covariance matrix and map ROI optical turbulence profiling using both simulated and on-sky data from CANARY, an AO demonstrator on the 4.2 m William Herschel telescope, La Palma. On-sky CANARY results are compared to contemporaneous profiles from Stereo-SCIDAR - a dedicated high-resolution optical turbulence profiler. It is shown that the covariance map ROI optimizes the accuracy of AO telemetry optical turbulence profiling. In addition, we show that the covariance map ROI reduces the fitting time for an extremely large telescope-scale system by a factor of 72. The software package we developed to collect all of the presented results is now open source.
△ Less
Submitted 17 January, 2019;
originally announced January 2019.
