-
Acceleration of Power System Dynamic Simulations using a Deep Equilibrium Layer and Neural ODE Surrogate
Authors:
Matthew Bossart,
Jose Daniel Lara,
Ciaran Roberts,
Rodrigo Henriquez-Auba,
Duncan Callaway,
Bri-Mathias Hodge
Abstract:
The dominant paradigm for power system dynamic simulation is to build system-level simulations by combining physics-based models of individual components. The sheer size of the system along with the rapid integration of inverter-based resources exacerbates the computational burden of running time domain simulations. In this paper, we propose a data-driven surrogate model based on implicit machine…
▽ More
The dominant paradigm for power system dynamic simulation is to build system-level simulations by combining physics-based models of individual components. The sheer size of the system along with the rapid integration of inverter-based resources exacerbates the computational burden of running time domain simulations. In this paper, we propose a data-driven surrogate model based on implicit machine learning -- specifically deep equilibrium layers and neural ordinary differential equations -- to learn a reduced order model of a portion of the full underlying system. The data-driven surrogate achieves similar accuracy and reduction in simulation time compared to a physics-based surrogate, without the constraint of requiring detailed knowledge of the underlying dynamic models. This work also establishes key requirements needed to integrate the surrogate into existing simulation workflows; the proposed surrogate is initialized to a steady state operating point that matches the power flow solution by design.
△ Less
Submitted 10 May, 2024;
originally announced May 2024.
-
Sibson's formula for higher order Voronoi diagrams
Authors:
Mercè Claverol,
Andrea de las Heras-Parrilla,
Clemens Huemer,
Dolores Lara
Abstract:
Let $S$ be a set of $n$ points in general position in $\mathbb{R}^d$. The order-$k$ Voronoi diagram of $S$, $V_k(S)$, is a subdivision of $\mathbb{R}^d$ into cells whose points have the same $k$ nearest points of $S$.
Sibson, in his seminal paper from 1980 (A vector identity for the Dirichlet tessellation), gives a formula to express a point $Q$ of $S$ as a convex combination of other points of…
▽ More
Let $S$ be a set of $n$ points in general position in $\mathbb{R}^d$. The order-$k$ Voronoi diagram of $S$, $V_k(S)$, is a subdivision of $\mathbb{R}^d$ into cells whose points have the same $k$ nearest points of $S$.
Sibson, in his seminal paper from 1980 (A vector identity for the Dirichlet tessellation), gives a formula to express a point $Q$ of $S$ as a convex combination of other points of $S$ by using ratios of volumes of the intersection of cells of $V_2(S)$ and the cell of $Q$ in $V_1(S)$. The natural neighbour interpolation method is based on Sibson's formula. We generalize his result to express $Q$ as a convex combination of other points of $S$ by using ratios of volumes from Voronoi diagrams of any given order.
△ Less
Submitted 26 April, 2024;
originally announced April 2024.
-
PowerSimulations.jl -- A Power Systems operations simulation Library
Authors:
Jose Daniel Lara,
Clayton Barrows,
Daniel Thom,
Sourabh Dalvi,
Duncan S. Callaway,
Dheepak Krishnamurthy
Abstract:
PowerSimulations.jl is a Julia-based BSD-licensed power system operations simulation tool developed as a flexible and open source software for quasi-static power systems simulations including Production Cost Models. PowerSimulations.jl tackles the issues of developing a simulation model in a modular way providing tools for the formulation of decision models and emulation models that can be solved…
▽ More
PowerSimulations.jl is a Julia-based BSD-licensed power system operations simulation tool developed as a flexible and open source software for quasi-static power systems simulations including Production Cost Models. PowerSimulations.jl tackles the issues of developing a simulation model in a modular way providing tools for the formulation of decision models and emulation models that can be solved independently or in an interconnected fashion. This paper discusses the software implementation of PowerSimulations.jl as a template for the development and implementation of operation simulators, providing solutions to commonly encountered issues like time series read/write and results sharing between models. The paper includes a publicly-available validation of classical operations simulations as well as examples of the advanced features of the software.
△ Less
Submitted 3 April, 2024;
originally announced April 2024.
-
Variations on Keeler's Theorem
Authors:
Alexandra Bartas,
Danny Lara,
Bruce Leavitt,
Ben Vessely
Abstract:
The 2010 Futurama episode The Prisoner of Benda features a mind swapping machine that swaps the minds of two people at a time with the restriction that the same pair of people cannot use the machine more than once. We show that if a machine swaps $n$ people cyclically with the condition that the same group of people cannot use the machine again, we can find a way to get everyone back. We prove our…
▽ More
The 2010 Futurama episode The Prisoner of Benda features a mind swapping machine that swaps the minds of two people at a time with the restriction that the same pair of people cannot use the machine more than once. We show that if a machine swaps $n$ people cyclically with the condition that the same group of people cannot use the machine again, we can find a way to get everyone back. We prove our solution is optimal for when $n =3$. We also introduce an infinite variant of the mind swapping machine.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
PowerSimulationsDynamics.jl -- An Open Source Modeling Package for Modern Power Systems with Inverter-Based Resources
Authors:
Jose Daniel Lara,
Rodrigo Henriquez-Auba,
Matthew Bossart,
Duncan S. Callaway,
Clayton Barrows
Abstract:
In this paper we present the development of an open-source simulation toolbox, PowerSimulationsDynamics.jl, to study the dynamic response of power systems, focusing on the requirements to model systems with high penetrations of Inverter-Based Resources (IBRs). PowerSimulationsDynamics.jl is implemented in Julia and features a rich library of synchronous generator, inverter, and load models. In add…
▽ More
In this paper we present the development of an open-source simulation toolbox, PowerSimulationsDynamics.jl, to study the dynamic response of power systems, focusing on the requirements to model systems with high penetrations of Inverter-Based Resources (IBRs). PowerSimulationsDynamics.jl is implemented in Julia and features a rich library of synchronous generator, inverter, and load models. In addition, it allows the study of quasi-static phasors and electromagnetic dq models that use a dynamic network representation. Case studies and validation exercises show that PowerSimulationsDynamics.jl results closely match other commercial and open-source simulation tools.
△ Less
Submitted 25 March, 2024; v1 submitted 5 August, 2023;
originally announced August 2023.
-
Room-temperature polariton repulsion and ultra-strong coupling for a non-trivial topological one-dimensional tunable Fibonacci-conjugated porous-Silicon photonic quasi-crystal showing quasi bound-states-in-the-continuum
Authors:
Atzin David Ruiz Pérez,
Salvador Escobar Guerrero,
Ma. Del Rocío Nava Lara,
Jorge-Alejandro Reyes-Esqueda
Abstract:
Room temperature strong coupling from CdSeS/Zn quantum-dots embedded into a tunable porous-silicon Fibonacci-conjugated array could be observed when exciton's energy was tuned either to the photonic-edge or the defect in the middle of the pseudo-bandgap region of the 1D cavity. Both, the photonic-edge and the defect could be identified as topological edge modes and quasi-bound-states-in-the-contin…
▽ More
Room temperature strong coupling from CdSeS/Zn quantum-dots embedded into a tunable porous-silicon Fibonacci-conjugated array could be observed when exciton's energy was tuned either to the photonic-edge or the defect in the middle of the pseudo-bandgap region of the 1D cavity. Both, the photonic-edge and the defect could be identified as topological edge modes and quasi-bound-states-in-the-continuum, where large density of states and field localization over a wider bandwidth produce a broadband Purcell enhancement, helping to optimize the coupling among the exciton and the 1D photonic quasi-crystal despite the natural difficulty to make the quantum dots to penetrate the cavity pores. A clear repulsion among polaritons, amounting to almost 8 meV for in-plane k values when the cavity energy is larger than the exciton one (blue k-detuning), was measured when increasing the incident light fluence, marking the potential of this non-trivial topological array for achieving polariton quantum blockade. Evidence for ultra-strong coupling, where a shift as large as 20 meV, could be found when the defect of the pseudo-bandgap region of the cavity was tuned to the exciton.
△ Less
Submitted 29 May, 2023; v1 submitted 17 May, 2023;
originally announced May 2023.
-
Revisiting Power Systems Time-domain Simulation Methods and Models
Authors:
Jose Daniel Lara,
Rodrigo Henriquez-Auba,
Deepak Ramasubramanian,
Sairaj Dhople,
Duncan S. Callaway,
Seth Sanders
Abstract:
The changing nature of power systems dynamics is challenging present practices related to modeling and study of system-level dynamic behavior. While developing new techniques and models to handle the new modeling requirements, it is also critical to review some of the terminology used to describe existing simulation approaches and the embedded assumptions. This paper provides a first-principles re…
▽ More
The changing nature of power systems dynamics is challenging present practices related to modeling and study of system-level dynamic behavior. While developing new techniques and models to handle the new modeling requirements, it is also critical to review some of the terminology used to describe existing simulation approaches and the embedded assumptions. This paper provides a first-principles review of the simplifications and transformation commonly used in the formulation of time-domain simulation models. It introduces a taxonomy and classification of time-domain simulation models depending on their frequency bandwidth, network representation, and software availability. Furthermore, it focuses on the fundamental aspects of averaging techniques, and model reduction approaches that result in modeling choices, and discusses the associated challenges and opportunities of applying these methods in systems with large shares of Inverter Based Resources (IBRs). The paper concludes with an illustrative simulation that compares the trajectories of an IBR-dominated system.
△ Less
Submitted 14 June, 2023; v1 submitted 24 January, 2023;
originally announced January 2023.
-
Small-Signal Stability Impacts of Load and Network Dynamics on Grid-Forming Inverters
Authors:
Rodrigo Henriquez-Auba,
Jose Daniel Lara,
Duncan S. Callaway
Abstract:
This paper presents several stability analyses for grid-forming inverters and synchronous generators considering the dynamics of transmission lines and different load models. Load models are usually of secondary importance compared to generation source models, but as the results show, they play a crucial role in stability studies with the introduction of inverter-based resources. Given inverter co…
▽ More
This paper presents several stability analyses for grid-forming inverters and synchronous generators considering the dynamics of transmission lines and different load models. Load models are usually of secondary importance compared to generation source models, but as the results show, they play a crucial role in stability studies with the introduction of inverter-based resources. Given inverter control time scales, the implications of considering or neglecting electromagnetic transients of the network are very relevant in the stability assessments. In this paper, we perform eigenvalue analyses for inverter-based resources and synchronous machines connected to a load and explore the effects of multiples models under different network representations. We explore maximum loadability of inverter-based resources and synchronous machines, while analyzing the effects of load and network dynamic models on small-signal stability. The results show that the network representation plays a fundamental role in the stability of the system of different load models. The resulting stability regions are significantly different depending on the source and load model considered.
△ Less
Submitted 26 February, 2024; v1 submitted 15 December, 2022;
originally announced December 2022.
-
On algebras of finite general representation type
Authors:
Ryan Kinser,
Danny Lara
Abstract:
We introduce the notion of ``finite general representation type'' for a finite-dimensional algebra, a property related to the ``dense orbit property'' introduced by Chindris-Kinser-Weyman. We use an interplay of geometric, combinatorial, and algebraic methods to produce a family of algebras of wild representation type but finite general representation type. For completeness, we also give a short p…
▽ More
We introduce the notion of ``finite general representation type'' for a finite-dimensional algebra, a property related to the ``dense orbit property'' introduced by Chindris-Kinser-Weyman. We use an interplay of geometric, combinatorial, and algebraic methods to produce a family of algebras of wild representation type but finite general representation type. For completeness, we also give a short proof that the only local algebras of discrete general representation type are already of finite representation type. We end with a Brauer-Thrall style conjecture for general representations of algebras.
△ Less
Submitted 20 March, 2024; v1 submitted 6 April, 2022;
originally announced April 2022.
-
Selective game version of q-points
Authors:
Dione Andrade Lara,
Renan Maneli Mezabarba
Abstract:
This work presents the selection principle $S_1^*(τ_x,CD)$ that characterizes $q$-points. We also discuss the induced topological game $G_1^*(τ_x,CD)$ and its relations with $W$-points and $\widetilde{W}$-points, as well as with the game $G_1(Ω_x,Ω_x)$.
This work presents the selection principle $S_1^*(τ_x,CD)$ that characterizes $q$-points. We also discuss the induced topological game $G_1^*(τ_x,CD)$ and its relations with $W$-points and $\widetilde{W}$-points, as well as with the game $G_1(Ω_x,Ω_x)$.
△ Less
Submitted 2 June, 2022; v1 submitted 6 April, 2021;
originally announced April 2021.
-
Inlet temperature driven supercritical bifurcation of combustion instabilities in a lean premixed prevaporized combustor
Authors:
X. Han,
D. Laera,
A. S. Morgans,
Y. Z. Lin,
Z. Zhang,
X. Hui,
C. J. Sung
Abstract:
The present article reports experimental observation and analyses of a supercritical bifurcation of combustion instabilities triggered by the air inlet temperature (Ta). The studies are performed with a pressurised kerosene fuelled Lean Premixed Prevaporized (LPP) combustor operated under elevated temperature. Unlike some previous studies, starting from an unstable condition of the system, the amp…
▽ More
The present article reports experimental observation and analyses of a supercritical bifurcation of combustion instabilities triggered by the air inlet temperature (Ta). The studies are performed with a pressurised kerosene fuelled Lean Premixed Prevaporized (LPP) combustor operated under elevated temperature. Unlike some previous studies, starting from an unstable condition of the system, the amplitude of combustion instabilities suddenly decrease when Ta exceeds a critical value of Ta =570 K. When the temperature is lowered back the system returns to being unstable without featuring any hysteresis behaviour, as expected in case of a supercritical bifurcation. The unstable flames feature a periodic axial motion of lift-off and re-ignition, characterized as Helmholtz mode. The phase difference between chemiluminescence and pressure signals is found to increase with Ta, exceeding 90 degrees (out of phase) for temperatures higher than 570 K. A low order network framework is conducted, illustrating that when Ta is increased a stability shift of this mode is predicted at Ta near 570 K, in good agreement with the experimental observations. The impact of Ta on the spray characteristics is also examined, finding that higher Ta promotes fuel evaporation and reduces equivalence ratio fluctuation at the exit of the swirler.
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
Flame interactions in a stratified swirl burner: flame stabilization, combustion instabilities and beating oscillations
Authors:
X. Han,
D. Laera,
D. Yang,
C. Zhang,
J. Wang,
X. Hui,
Y. Lin,
A. S. Morgans,
C. J. Sung
Abstract:
The present article investigates the interactions between the pilot and main flames in a novel stratified swirl burner using both experimental and numerical methods. Experiments are conducted in a test rig operating at atmospheric conditions. The system is equipped with the BASIS (Beihang Axial Swirler Independently-Stratified) burner fuelled with premixed methane-air mixtures. To illustrate the i…
▽ More
The present article investigates the interactions between the pilot and main flames in a novel stratified swirl burner using both experimental and numerical methods. Experiments are conducted in a test rig operating at atmospheric conditions. The system is equipped with the BASIS (Beihang Axial Swirler Independently-Stratified) burner fuelled with premixed methane-air mixtures. To illustrate the interactions between the pilot and main flames, three operating modes are studied, where the burner works with: (i) only the pilot flame, (ii) only the main flame, and (iii) the stratified flame (with both the pilot and main flames). We found that: (1) In the pilot flame mode, the flame changes from V-shape to M-shape when the main stage is switched from closed to supplying a pure air stream. Strong oscillations in the M-shape flame are found due to the dilution of the main air to the pilot methane flame. (2) In the main flame mode, the main flame is lifted off from the burner if the pilot stage is supplied with air. The temperature of the primary recirculation zone drops substantially and the unsteady heat release is intensified. (3) In the stratified flame mode, unique beating oscillations exhibiting dual closely-spaced frequencies in the pressure spectrum. is found. This is observed within over narrow window of equivalence ratio combinations between the pilot and main stages. Detailed analysis of the experimental data shows that flame dynamics and thermoacoustic couplings at these two frequencies are similar to those of the unstable pilot flame and the attached main flame cases, respectively. Large Eddy Simulations (LESs) are carried out with OpenFOAM to understand the mechanisms of the time averaged flame shapes in different operating modes. Finally, a simple acoustic analysis is proposed to understand the acoustic mode nature of the beating oscillations.
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
Grid-Coupled Dynamic Response of Battery-Driven Voltage Source Converters
Authors:
Ciaran Roberts,
Jose Daniel Lara,
Rodrigo Henriquez-Auba,
Bala Kameshwar Poolla,
Duncan S. Callaway
Abstract:
With the increasing interest in converter-fed islanded microgrids, particularly for resilience, it is becoming more critical to understand the dynamical behavior of these systems. This paper takes a holistic view of grid-forming converters and considers control approaches for both modeling and regulating the DC-link voltage when the DC-source is a battery energy storage system. We are specifically…
▽ More
With the increasing interest in converter-fed islanded microgrids, particularly for resilience, it is becoming more critical to understand the dynamical behavior of these systems. This paper takes a holistic view of grid-forming converters and considers control approaches for both modeling and regulating the DC-link voltage when the DC-source is a battery energy storage system. We are specifically interested in understanding the performance of these controllers, subject to large load changes, for decreasing values of the DC-side capacitance. We consider a fourth, second, and zero-order model of the battery; and establish that the zero-order model captures the dynamics of interest for the timescales considered for disturbances examined. Additionally, we adapt a grid search for optimizing the controller parameters of the DC/DC controller and show how the inclusion of AC side measurements into the DC/DC controller can improve its dynamic performance. This improvement in performance offers the opportunity to reduce the DC-side capacitance given an admissible DC voltage transient deviation, thereby, potentially allowing for more reliable capacitor technology to be deployed.
△ Less
Submitted 28 July, 2020; v1 submitted 22 July, 2020;
originally announced July 2020.
-
Tunable Photodetectors via in situ Thermal Conversion of TiS$_3$ to TiO$_2$
Authors:
Foad Ghasemi,
Riccardo Frisenda,
Eduardo Flores,
Nikos Papadopoulos,
Robert Biele,
David Perez de Lara,
Herre S. J. van der Zant,
Kenji Watanabe,
Takashi Taniguchi,
Roberto D'Agosta,
Jose R. Ares,
Carlos Sánchez,
Isabel J. Ferrer,
Andres Castellanos-Gomez
Abstract:
In two-dimensional materials research, oxidation is usually considered as a common source for the degradation of electronic and optoelectronic devices or even device failure. However, in some cases a controlled oxidation can open the possibility to widely tune the band structure of 2D materials. In particular, we demonstrate the controlled oxidation of titanium trisulfide (TiS$_3$), a layered semi…
▽ More
In two-dimensional materials research, oxidation is usually considered as a common source for the degradation of electronic and optoelectronic devices or even device failure. However, in some cases a controlled oxidation can open the possibility to widely tune the band structure of 2D materials. In particular, we demonstrate the controlled oxidation of titanium trisulfide (TiS$_3$), a layered semiconductor that has attracted much attention recently thanks to its quasi-1D electronic and optoelectronic properties and its direct bandgap of 1.1 eV. Heating TiS$_3$ in air above 300 °C gradually converts it into TiO$_2$, a semiconductor with a wide bandgap of 3.2 eV with ap-plications in photo-electrochemistry and catalysis. In this work, we investigate the controlled thermal oxidation of individual TiS$_3$ nanoribbons and its influence on the optoelectronic properties of TiS$_3$-based photodetectors. We observe a step-wise change in the cut-off wavelength from its pristine value ~1000 nm to 450 nm after subjecting the TiS$_3$ devices to subsequent thermal treatment cycles. Ab-initio and many-body calculations confirm an increase in the bandgap of titanium oxysulfide (TiO$_{2-x}$S$_x$) when increasing the amount of oxygen and reducing the amount of sulfur.
△ Less
Submitted 11 June, 2020;
originally announced June 2020.
-
Computational Experiment Design for Operations Model Simulation
Authors:
Jose Daniel Lara,
Jonathan T. Lee,
Duncan Callaway,
Bri-Mathias Hodge
Abstract:
Computer simulations that demonstrate the valueof novel approaches are crucial to developing more flexibleand robust power systems operations with high penetrations ofrenewable energy at multiple geographic and temporal scales.However, optimization-based simulations that depend on forecastdata often face challenges in evaluating performance, reproducingresults, and testing under realistic simulati…
▽ More
Computer simulations that demonstrate the valueof novel approaches are crucial to developing more flexibleand robust power systems operations with high penetrations ofrenewable energy at multiple geographic and temporal scales.However, optimization-based simulations that depend on forecastdata often face challenges in evaluating performance, reproducingresults, and testing under realistic simulation scenarios. In thispaper, we develop scientific computing best-practices for thevalidation and reproduction of power systems operational models.We then employ two case studies to demonstrate the proposedvalidation and reproduction framework.
△ Less
Submitted 23 April, 2020;
originally announced April 2020.
-
LITS.jl -- An Open-Source Julia based Simulation Toolbox for Low-Inertia Power Systems
Authors:
Rodrigo Henriquez-Auba,
Jose D. Lara,
Ciaran Roberts,
Nathan Pallo,
Duncan S. Callaway
Abstract:
The integration of converter-interfaced generation (CIG) from renewable energy sources poses challenges to the stability and transient behavior of electric power systems. Understanding the dynamic behavior of low-inertia power systems is critical to addressing these stability questions. However, there is a limited availability of open source tools explicitly geared towards low-inertia systems mode…
▽ More
The integration of converter-interfaced generation (CIG) from renewable energy sources poses challenges to the stability and transient behavior of electric power systems. Understanding the dynamic behavior of low-inertia power systems is critical to addressing these stability questions. However, there is a limited availability of open source tools explicitly geared towards low-inertia systems modeling. In this paper, we develop an open source simulation toolbox to study transient responses under high penetration scenarios. LITS.jl is implemented in the Julia computing language and features multi-machine modeling capability, a rich library of synchronous generators components (AVR, PSS, Governor, etc.) and inverter configurations. Several case studies are conducted and benchmarked and validated against existing toolboxes. Case studies are selected to showcase the integration of different device models' behavior in power systems.
△ Less
Submitted 5 March, 2020;
originally announced March 2020.
-
Polarization-sensitive and broadband photodetection based on a mixed-dimensionality TiS3/Si p-n junction
Authors:
Yue Niu,
Riccardo Frisenda,
Eduardo Flores,
Jose R. Ares,
Weicheng Jiao,
David Perez de Lara,
Carlos Sanchez,
Rongguo Wang,
Isabel J. Ferrer,
Andres Castellanos-Gomez
Abstract:
The capability to detect the polarization state of light is crucial in many day-life applications and scientific disciplines. Novel anisotropic two-dimensional materials such as TiS3 combine polarization sensitivity, given by the in-plane optical anisotropy, with excellent electrical properties. Here we demonstrate the fabrication of a monolithic polarization sensitive broadband photodetector base…
▽ More
The capability to detect the polarization state of light is crucial in many day-life applications and scientific disciplines. Novel anisotropic two-dimensional materials such as TiS3 combine polarization sensitivity, given by the in-plane optical anisotropy, with excellent electrical properties. Here we demonstrate the fabrication of a monolithic polarization sensitive broadband photodetector based on a mixed-dimensionality TiS3/Si p-n junction. The fabricated devices show broadband responsivity up to 1050 nm, a strong sensitivity to linearly polarized illumination with difference between the two orthogonal polarization states up to 350 % and a good detectivity and fast response time. The discussed devices can be used as building blocks to fabricate more complex polarization sensitive systems such as polarimeters.
△ Less
Submitted 22 September, 2020; v1 submitted 27 March, 2019;
originally announced March 2019.
-
Trends on Computer Security: Cryptography, User Authentication, Denial of Service and Intrusion Detection
Authors:
Pablo Daniel Marcillo Lara,
Daniel Alejandro Maldonado-Ruiz,
Santiago Daniel Arrais Díaz,
Lorena Isabel Barona López,
Ángel Leonardo Valdivieso Caraguay
Abstract:
The new generation of security threats has been promoted by digital currencies and real-time applications, where all users develop new ways to communicate on the Internet. Security has evolved in the need of privacy and anonymity for all users and his portable devices. New technologies in every field prove that users need security features integrated into their communication applications, parallel…
▽ More
The new generation of security threats has been promoted by digital currencies and real-time applications, where all users develop new ways to communicate on the Internet. Security has evolved in the need of privacy and anonymity for all users and his portable devices. New technologies in every field prove that users need security features integrated into their communication applications, parallel systems for mobile devices, internet, and identity management. This review presents the key concepts of the main areas in computer security and how it has evolved in the last years. This work focuses on cryptography, user authentication, denial of service attacks, intrusion detection and firewalls.
△ Less
Submitted 19 March, 2019;
originally announced March 2019.
-
A strain tunable single-layer MoS2 photodetector
Authors:
Patricia Gant,
Peng Huang,
David Pérez de Lara,
Dan Guo,
Riccardo Frisenda,
Andres Castellanos-Gomez
Abstract:
Strain engineering, which aims to tune the bandgap of a semiconductor by the application of strain, has emerged as an interesting way to control the electrical and optical properties of two-dimensional (2D) materials. Apart from the changes in the intrinsic properties of 2D materials, the application of strain can be also used to modify the characteristics of devices based on them. In this work, w…
▽ More
Strain engineering, which aims to tune the bandgap of a semiconductor by the application of strain, has emerged as an interesting way to control the electrical and optical properties of two-dimensional (2D) materials. Apart from the changes in the intrinsic properties of 2D materials, the application of strain can be also used to modify the characteristics of devices based on them. In this work, we study flexible and transparent photodetectors based on single-layer MoS2 under the application of biaxial strain. We find that by controlling the level of strain, we can tune the photoresponsivity (by 2-3 orders of magnitude), the response time (from <80 ms to 1.5 s) and the spectral bandwidth (with a gauge factor of 135 meV/% or 58 nm/%) of the device.
△ Less
Submitted 17 July, 2019; v1 submitted 7 February, 2019;
originally announced February 2019.
-
Towards Air Stability of Ultra-Thin GaSe Devices: Avoiding Environmental and Laser-Induced Degradation by Encapsulation
Authors:
Qinghua Zhao,
Riccardo Frisenda,
Patricia Gant,
David Perez de Lara,
Carmen Munuera,
Mar Garcia-Hernandez,
Yue Niu,
Tao Wang,
Wanqi Jie,
Andres Castellanos-Gomez
Abstract:
Gallium selenide (GaSe) is a novel two-dimensional material, which belongs to the layered III-VIA semiconductors family and attracted interest recently as it displays single-photon emitters at room temperature and strong optical non-linearity. Nonetheless, few-layer GaSe is not stable under ambient conditions and it tends to degrade over time. Here we combine atomic force microscopy, Raman spectro…
▽ More
Gallium selenide (GaSe) is a novel two-dimensional material, which belongs to the layered III-VIA semiconductors family and attracted interest recently as it displays single-photon emitters at room temperature and strong optical non-linearity. Nonetheless, few-layer GaSe is not stable under ambient conditions and it tends to degrade over time. Here we combine atomic force microscopy, Raman spectroscopy and optoelectronic measurements in photodetectors based on thin GaSe to study its long-term stability. We found that the GaSe flakes exposed to air tend to decompose forming firstly amorphous selenium and Ga2Se3 and subsequently Ga2O3. While the first stage is accompanied by an increase in photocurrent, in the second stage we observe a decrease in photocurrent which leads to the final failure of GaSe photodetectors. Additionally, we found that the encapsulation of the GaSe photodetectors with hexagonal boron nitride (h-BN) can protect the GaSe from degradation and can help to achieve long-term stability of the devices.
△ Less
Submitted 15 October, 2018;
originally announced October 2018.
-
Optical contrast and refractive index of natural van der Waals heterostructure nanosheets of franckeite
Authors:
Patricia Gant,
Foad Ghasemi,
David Maeso,
Carmen Munuera,
Elena López-Elvira,
Riccardo Frisenda,
David Pérez De Lara,
Gabino Rubio-Bollinger,
Mar Garcia-Hernandez,
Andres Castellanos-Gomez
Abstract:
We study mechanically exfoliated nanosheets of franckeite by quantitative optical microscopy. The analysis of transmission mode and epi-illumination mode optical microscopy images provides a rapid method to estimate the thickness of the exfoliated flakes at first glance. A quantitative analysis of the optical contrast spectra by means of micro-reflectance allows one to determine the refractive ind…
▽ More
We study mechanically exfoliated nanosheets of franckeite by quantitative optical microscopy. The analysis of transmission mode and epi-illumination mode optical microscopy images provides a rapid method to estimate the thickness of the exfoliated flakes at first glance. A quantitative analysis of the optical contrast spectra by means of micro-reflectance allows one to determine the refractive index of franckeite in a broad range of the visible spectrum through a fit of the acquired spectra to a Fresnel law based model.
△ Less
Submitted 11 October, 2018;
originally announced October 2018.
-
Thickness-Dependent Differential Reflectance Spectra of Monolayer and Few-Layer MoS2, MoSe2, WS2 and WSe2
Authors:
Yue Niu,
Sergio Gonzalez-Abad,
Riccardo Frisenda,
Philipp Marauhn,
Matthias Drüppel,
Patricia Gant,
Robert Schmidt,
Najme S. Taghavi,
David Barcons,
Aday J. Molina-Mendoza,
Steffen Michaelis de Vasconcellos,
Rudolf Bratschitsch,
David Perez De Lara,
Michael Rohlfing,
Andres Castellanos-Gomez
Abstract:
The research field of two dimensional (2D) materials strongly relies on optical microscopy characterization tools to identify atomically thin materials and to determine their number of layers. Moreover, optical microscopy-based techniques opened the door to study the optical properties of these nanomaterials. We presented a comprehensive study of the differential reflectance spectra of 2D semicond…
▽ More
The research field of two dimensional (2D) materials strongly relies on optical microscopy characterization tools to identify atomically thin materials and to determine their number of layers. Moreover, optical microscopy-based techniques opened the door to study the optical properties of these nanomaterials. We presented a comprehensive study of the differential reflectance spectra of 2D semiconducting transition metal dichalcogenides (TMDCs), MoS2, MoSe2, WS2, and WSe2, with thickness ranging from one layer up to six layers. We analyzed the thickness-dependent energy of the different excitonic features, indicating the change in the band structure of the different TMDC materials with the number of layers. Our work provided a route to employ differential reflectance spectroscopy for determining the number of layers of MoS2, MoSe2, WS2, and WSe2.
△ Less
Submitted 10 October, 2018;
originally announced October 2018.
-
Optimal Grid Drawings of Complete Multipartite Graphs and an Integer Variant of the Algebraic Connectivity
Authors:
Ruy Fabila-Monroy,
Carlos Hidalgo-Toscano,
Clemens Huemer,
Dolores Lara,
Dieter Mitsche
Abstract:
How to draw the vertices of a complete multipartite graph $G$ on different points of a bounded $d$-dimensional integer grid, such that the sum of squared distances between vertices of $G$ is (i) minimized or (ii) maximized? For both problems we provide a characterization of the solutions. For the particular case $d=1$, our solution for (i) also settles the minimum-2-sum problem for complete bipart…
▽ More
How to draw the vertices of a complete multipartite graph $G$ on different points of a bounded $d$-dimensional integer grid, such that the sum of squared distances between vertices of $G$ is (i) minimized or (ii) maximized? For both problems we provide a characterization of the solutions. For the particular case $d=1$, our solution for (i) also settles the minimum-2-sum problem for complete bipartite graphs; the minimum-2-sum problem was defined by Juvan and Mohar in 1992. Weighted centroidal Voronoi tessellations are the solution for (ii). Such drawings are related with Laplacian eigenvalues of graphs. This motivates us to study which properties of the algebraic connectivity of graphs carry over to the restricted setting of drawings of graphs with integer coordinates.
△ Less
Submitted 27 August, 2018;
originally announced August 2018.
-
On crossing families of complete geometric graphs
Authors:
Dolores Lara,
Christian Rubio-Montiel
Abstract:
A crossing family is a collection of pairwise crossing segments, this concept was introduced by Aronov et. al. (1994). They prove that any set of $n$ points (in general position) in the plain contains a crossing family of size $\sqrt{n/12}$. In this paper we present a generalization of the concept and give several results regarding this generalization.
A crossing family is a collection of pairwise crossing segments, this concept was introduced by Aronov et. al. (1994). They prove that any set of $n$ points (in general position) in the plain contains a crossing family of size $\sqrt{n/12}$. In this paper we present a generalization of the concept and give several results regarding this generalization.
△ Less
Submitted 14 August, 2018; v1 submitted 24 May, 2018;
originally announced May 2018.
-
Biaxial strain in atomically thin transition metal dichalcogenides
Authors:
Riccardo Frisenda,
Robert Schmidt,
Steffen Michaelis de Vasconcellos,
Rudolf Bratschitsch,
David Perez de Lara,
Andres Castellanos-Gomez
Abstract:
Strain engineering in single-layer semiconducting transition metal dichalcogenides aims to tune their bandgap energy and to modify their optoelectronic properties by the application of external strain. In this paper we study transition metal dichalcogenides monolayers deposited on polymeric substrates under the application of biaxial strain, both tensile and compressive. We can control the amount…
▽ More
Strain engineering in single-layer semiconducting transition metal dichalcogenides aims to tune their bandgap energy and to modify their optoelectronic properties by the application of external strain. In this paper we study transition metal dichalcogenides monolayers deposited on polymeric substrates under the application of biaxial strain, both tensile and compressive. We can control the amount of biaxial strain applied by letting the substrate thermally expand or compress by changing the substrate temperature. After modelling the substrate-dependent strain transfer process with a finite elements simulation, we performed micro-differential spectroscopy of four transition metal dichalcogenides monolayers (MoS2, MoSe2, WS2, WSe2) under the application of biaxial strain and measured their optical properties. For tensile strain we observe a redshift of the bandgap that reaches a value as large as 94 meV/% in the case of single-layer WS2 deposited on polypropylene. The observed bandgap shifts as a function of substrate extension/compression follow the order WS2 > WSe2 > MoS2 > MoSe2.
△ Less
Submitted 30 April, 2018;
originally announced April 2018.
-
On Gonality, Scrolls, and Canonical Models of Non-Gorenstein Curves
Authors:
Danielle Nicolau Lara,
Jairo Menezes Souza,
Renato Vidal Martins
Abstract:
Let $C$ be an integral and projective curve; and let $C'$ be its canonical model. We study the relation between the gonality of $C$ and the dimension of a rational normal scroll $S$ where $C'$ can lie on. We are mainly interested in the case where $C$ is singular, or even non-Gorenstein, in which case $C'\not\cong C$. We first analyze some properties of an inclusion $C'\subset S$ when it is induce…
▽ More
Let $C$ be an integral and projective curve; and let $C'$ be its canonical model. We study the relation between the gonality of $C$ and the dimension of a rational normal scroll $S$ where $C'$ can lie on. We are mainly interested in the case where $C$ is singular, or even non-Gorenstein, in which case $C'\not\cong C$. We first analyze some properties of an inclusion $C'\subset S$ when it is induced by a pencil on $C$. Afterwards, in an opposite direction, we assume $C'$ lies on a certain scroll, and check some properties $C$ may satisfy, such as gonality and the kind of its singularities. At the end, we prove that a rational monomial curve $C$ has gonality $d$ if and only if $C'$ lies on a $(d-1)$-fold scroll.
△ Less
Submitted 28 March, 2018;
originally announced March 2018.
-
Recent progress in the assembly of nanodevices and van der Waals heterostructures by deterministic placement of 2D materials
Authors:
Riccardo Frisenda,
Efrén Navarro-Moratalla,
Patricia Gant,
David Pérez De Lara,
Pablo Jarillo-Herrero,
Roman V. Gorbachev,
Andres Castellanos-Gomez
Abstract:
Designer heterostructures can now be assembled layer-by-layer with unmatched precision thanks to the recently developed deterministic placement methods to transfer two-dimensional (2D) materials. This possibility constitutes the birth of a very active research field on the so-called van der Waals heterostructures. Moreover, these deterministic placement methods also open the door to fabricate comp…
▽ More
Designer heterostructures can now be assembled layer-by-layer with unmatched precision thanks to the recently developed deterministic placement methods to transfer two-dimensional (2D) materials. This possibility constitutes the birth of a very active research field on the so-called van der Waals heterostructures. Moreover, these deterministic placement methods also open the door to fabricate complex devices, which would be otherwise very difficult to achieve by conventional bottom-up nanofabrication approaches, and to fabricate fully-encapsulated devices with exquisite electronic properties. The integration of 2D materials with existing technologies such as photonic and superconducting waveguides and fiber optics is another exciting possibility. Here, we review the state-of-the-art of the deterministic placement methods, describing and comparing the different alternative methods available in the literature and we illustrate their potential to fabricate van der Waals heterostructures, to integrate 2D materials into complex devices and to fabricate artificial bilayer structures where the layers present a user-defined rotational twisting angle.
△ Less
Submitted 15 November, 2017;
originally announced December 2017.
-
Characterization of highly crystalline lead iodide nanosheets prepared by room-temperature solution processing
Authors:
Riccardo Frisenda,
Joshua O. Island,
Jose L. Lado,
Emerson Giovanelli,
Patricia Gant,
Philipp Nagler,
Sebastian Bange,
John M. Lupton,
Christian Schüller,
Aday Molina-Mendoza,
Lucia Aballe,
Michael Foerster,
Tobias Korn,
Miguel Angel Niño,
David Perez de Lara,
Emilio M. Pérez,
Joaquín Fernandéz-Rossier,
Andres Castellanos-Gomez
Abstract:
Two-dimensional semiconducting materials are particularly appealing for many applications. Although theory predicts a large number of two-dimensional materials, experimentally only a few of these materials have been identified and characterized comprehensively in the ultrathin limit. Lead iodide, which belongs to the transition metal halides family and has a direct bandgap in the visible spectrum,…
▽ More
Two-dimensional semiconducting materials are particularly appealing for many applications. Although theory predicts a large number of two-dimensional materials, experimentally only a few of these materials have been identified and characterized comprehensively in the ultrathin limit. Lead iodide, which belongs to the transition metal halides family and has a direct bandgap in the visible spectrum, has been known for a long time and has been well characterized in its bulk form. Nevertheless, studies of this material in the nanometer thickness regime are rather scarce. In this article we demonstrate an easy way to synthesize ultrathin, highly crystalline flakes of PbI2 by precipitation from a solution in water. We thoroughly characterize the produced thin flakes with different techniques ranging from optical and Raman spectros-copy to temperature-dependent photoluminescence and electron microscopy. We compare the results to ab initio calculations of the band structure of the material. Finally, we fabricate photodetectors based on PbI2 and study their optoelectronic properties.
△ Less
Submitted 10 October, 2017;
originally announced October 2017.
-
Balanced partitions of 3-colored geometric sets in the plane
Authors:
Sergey Bereg,
Matias Korman,
Rodrigo I. Silveira,
Ferran Hurtado,
Dolores Lara,
Jorge Urrutia,
Mikio Kano,
Carlos Seara,
Kevin Verbeek
Abstract:
Let $S$ be a finite set of geometric objects partitioned into classes or \emph{colors}. A subset $S'\subseteq S$ is said to be \emph{balanced} if $S'$ contains the same amount of elements of $S$ from each of the colors. We study several problems on partitioning $3$-colored sets of points and lines in the plane into two balanced subsets: (a) We prove that for every 3-colored arrangement of lines th…
▽ More
Let $S$ be a finite set of geometric objects partitioned into classes or \emph{colors}. A subset $S'\subseteq S$ is said to be \emph{balanced} if $S'$ contains the same amount of elements of $S$ from each of the colors. We study several problems on partitioning $3$-colored sets of points and lines in the plane into two balanced subsets: (a) We prove that for every 3-colored arrangement of lines there exists a segment that intersects exactly one line of each color, and that when there are $2m$ lines of each color, there is a segment intercepting $m$ lines of each color. (b) Given $n$ red points, $n$ blue points and $n$ green points on any closed Jordan curve $γ$, we show that for every integer $k$ with $0 \leq k \leq n$ there is a pair of disjoint intervals on $γ$ whose union contains exactly $k$ points of each color. (c) Given a set $S$ of $n$ red points, $n$ blue points and $n$ green points in the integer lattice satisfying certain constraints, there exist two rays with common apex, one vertical and one horizontal, whose union splits the plane into two regions, each one containing a balanced subset of $S$.
△ Less
Submitted 20 August, 2017;
originally announced August 2017.
-
Photodiodes based in La0.7Sr0.3MnO3/single layer MoS2 hybrid vertical heterostructures
Authors:
Yue Niu,
Riccardo Frisenda,
Simon A. Svatek,
Gloria Orfila,
Fernando Gallego,
Patricia Gant,
Nicolás Agraït,
Carlos León,
Alberto Rivera-Calzada,
David Perez De Lara,
Jacobo Santamaría,
Andres Castellanos-Gomez
Abstract:
The fabrication of artificial materials by stacking of individual two-dimensional (2D) materials is amongst one of the most promising research avenues in the field of 2D materials. Moreover, this strategy to fabricate new man-made materials can be further extended by fabricating hybrid stacks between 2D materials and other functional materials with different dimensionality making the potential num…
▽ More
The fabrication of artificial materials by stacking of individual two-dimensional (2D) materials is amongst one of the most promising research avenues in the field of 2D materials. Moreover, this strategy to fabricate new man-made materials can be further extended by fabricating hybrid stacks between 2D materials and other functional materials with different dimensionality making the potential number of combinations almost infinite. Among all these possible combinations, mixing 2D materials with transition metal oxides can result especially useful because of the large amount of interesting physical phenomena displayed separately by these two material families. We present a hybrid device based on the stacking of a single layer MoS2 onto a lanthanum strontium manganite (La0.7Sr0.3MnO3) thin film, creating an atomically thin device. It shows a rectifying electrical transport with a ratio of 103, and a photovoltaic effect with Voc up to 0.4 V. The photodiode behaviour arises as a consequence of the different doping character of these two materials. This result paves the way towards combining the efforts of these two large materials science communities.
△ Less
Submitted 19 June, 2017;
originally announced June 2017.
-
Dielectrophoretic assembly of liquid-phase-exfoliated TiS3 nanoribbons for photodetecting applications
Authors:
R. Frisenda,
E. Giovanelli,
P. Mishra,
P. Gant,
E. Flores,
C. Sánchez,
J. R. Ares,
D. Perez de Lara,
I. J. Ferrer,
E. M. Pérez,
A. Castellanos-Gomez
Abstract:
Liquid-phase-exfoliation is a technique capable of producing large quantities of two-dimensional material in suspension. Despite many efforts in the optimization of the exfoliation process itself not much has been done towards the integration of liquid-phase-exfoliated materials in working solid-state devices. In this article, we use dielectrophoresis to direct the assembly of liquid-phase-exfolia…
▽ More
Liquid-phase-exfoliation is a technique capable of producing large quantities of two-dimensional material in suspension. Despite many efforts in the optimization of the exfoliation process itself not much has been done towards the integration of liquid-phase-exfoliated materials in working solid-state devices. In this article, we use dielectrophoresis to direct the assembly of liquid-phase-exfoliated TiS3 nanoribbons between two gold electrodes to produce photodetectors working in the visible. Through electrical and optical measurements we characterize the responsivity of the device and we find values as large as 3.8 mA/W, which improve of more than one order of magnitude on the state-of-the-art for devices based on liquid-phase-exfoliated two-dimensional materials assembled by drop-casting or ink-jet methods.
△ Less
Submitted 12 June, 2017;
originally announced June 2017.
-
Lithography-free electrical transport measurements on 2D materials by direct microprobing
Authors:
Patricia Gant,
Yue Niu,
Simon A. Svatek,
Nicolás Agraït,
Carmen Munuera,
Mar García- Hernández,
Riccardo Frisenda,
David Perez de Lara,
Andres Castellanos-Gomez
Abstract:
We present a method to carry out electrical and opto-electronic measurements on 2D materials using carbon fiber microprobes to directly make electrical contacts to the 2D materials without damaging them. The working principle of this microprobing method is illustrated by measuring transport in MoS2 flakes in vertical (transport in the out-of-plane direction) and lateral (transport within the cryst…
▽ More
We present a method to carry out electrical and opto-electronic measurements on 2D materials using carbon fiber microprobes to directly make electrical contacts to the 2D materials without damaging them. The working principle of this microprobing method is illustrated by measuring transport in MoS2 flakes in vertical (transport in the out-of-plane direction) and lateral (transport within the crystal plane) configurations, finding performances comparable to those reported for MoS2 devices fabricated by conventional lithographic process. We also show that this method can be used with other 2D materials.
△ Less
Submitted 20 May, 2017;
originally announced May 2017.
-
A versatile scanning photocurrent mapping system to characterize optoelectronic devices based on 2D materials
Authors:
Christoph Reuter,
Riccardo Frisenda,
Der-Yuh Lin,
Tsung-Shine Ko,
David Perez de Lara,
Andres Castellanos-Gomez
Abstract:
The investigation of optoelectronic devices based on two-dimensional materials and their heterostructures is a very active area of investigation with both fundamental and applied aspects involved. We present a description of a home-built scanning photocurrent microscope that we have designed and developed to perform electronic transport and optical measurements of two-dimensional materials based d…
▽ More
The investigation of optoelectronic devices based on two-dimensional materials and their heterostructures is a very active area of investigation with both fundamental and applied aspects involved. We present a description of a home-built scanning photocurrent microscope that we have designed and developed to perform electronic transport and optical measurements of two-dimensional materials based devices. The complete system is rather inexpensive (<10000 EUR) and it can be easily replicated in any laboratory. To illustrate the setup we measure current-voltage characteristics, in dark and under global illumination, of an ultra-thin PN junction formed by the stacking of an n-doped few-layer MoS2 flake onto a p-type MoS2 flake. We then acquire scanning photocurrent maps and by mapping the short circuit current generated in the device under local illumination we find that at zero bias the photocurrent is generated mostly in the region of overlap between the n-type and p-type flakes.
△ Less
Submitted 4 May, 2017;
originally announced May 2017.
-
High Throughput Characterization of Epitaxially Grown Single-Layer MoS2
Authors:
Foad Ghasemi,
Riccardo Frisenda,
Dumitru Dumcenco,
Andras Kis,
David Perez de Lara,
Andres Castellanos-Gomez
Abstract:
The growth of single-layer MoS2 with chemical vapor deposition is an established method that can produce large-area and high quality samples. In this article, we investigate the geometrical and optical properties of hundreds of individual single-layer MoS2 crystallites grown on a highly-polished sapphire substrate. Most of the crystallites are oriented along the terraces of the sapphire substrate…
▽ More
The growth of single-layer MoS2 with chemical vapor deposition is an established method that can produce large-area and high quality samples. In this article, we investigate the geometrical and optical properties of hundreds of individual single-layer MoS2 crystallites grown on a highly-polished sapphire substrate. Most of the crystallites are oriented along the terraces of the sapphire substrate and have an area comprised between 10 μm2 and 60 μm2. Differential reflectance measurements performed on these crystallites show that the area of the MoS2 crystallites has an influence on the position and broadening of the B exciton while the orientation does not influence the A and B excitons of MoS2. These measurements demonstrate that differential reflectance measurements have the potential to be used to characterize the homogeneity of large area CVD grown samples.
△ Less
Submitted 6 April, 2017;
originally announced April 2017.
-
Biaxial strain tuning of the optical properties of single-layer transition metal dichalcogenides
Authors:
Riccardo Frisenda,
Matthias Drüppel,
Robert Schmidt,
Steffen Michaelis de Vasconcellos,
David Perez de Lara,
Rudolf Bratschitsch,
Michael Rohlfing,
Andres Castellanos-Gomez
Abstract:
Since their discovery single-layer semiconducting transition metal dichalcogenides have attracted much attention thanks to their outstanding optical and mechanical properties. Strain engineering in these two-dimensional materials aims to tune their bandgap energy and to modify their optoelectronic properties by the application of external strain. In this paper we demonstrate that biaxial strain, b…
▽ More
Since their discovery single-layer semiconducting transition metal dichalcogenides have attracted much attention thanks to their outstanding optical and mechanical properties. Strain engineering in these two-dimensional materials aims to tune their bandgap energy and to modify their optoelectronic properties by the application of external strain. In this paper we demonstrate that biaxial strain, both tensile and compressive, can be applied and released in a timescale of a few seconds in a reproducible way on transition metal dichalcogenides monolayers deposited on polymeric substrates. We can control the amount of biaxial strain applied by letting the substrate expand or compress. To do this we change the substrate temperature and choose materials with a large thermal expansion coefficient. After the investigation of the substrate-dependent strain transfer, we performed micro-differential spectroscopy of four transition metal dichalcogenides monolayers (MoS2, MoSe2, WS2, WSe2) under the application of biaxial strain and measured their optical properties. For tensile strain we observe a redshift of the bandgap that reaches a value as large as 95 meV/% in the case of single-layer WS2 deposited on polypropylene. The observed bandgap shifts as a function of substrate extension/compression follow the order MoSe2 < MoS2 < WSe2 < WS2. Theoretical calculations of these four materials under biaxial strain predict the same trend for the material-dependent rates of the shift and reproduce well the features observed in the measured reflectance spectra.
△ Less
Submitted 8 March, 2017;
originally announced March 2017.
-
Gate Tunable Photovoltaic Effect in MoS2 vertical P-N Homostructures
Authors:
Simon A. Svatek,
Elisa Antolin,
Der-Yuh Lin,
Riccardo Frisenda,
Christoph Reuter,
Aday J. Molina-Mendoza,
Manuel Muñoz,
Nicolás Agraït,
Tsung-Shine Ko,
David Perez de Lara,
Andres Castellanos-Gomez
Abstract:
P-n junctions based on vertically stacked single or few layer transition metal dichalcogenides (TMDCs) have attracted substantial scientific interest. Due to the propensity of TMDCs to show exclusively one type of conductivity, n- or p-type, heterojunctions of different materials are typically fabricated to produce diode-like current rectification and photovoltaic response. Recently, artificial, s…
▽ More
P-n junctions based on vertically stacked single or few layer transition metal dichalcogenides (TMDCs) have attracted substantial scientific interest. Due to the propensity of TMDCs to show exclusively one type of conductivity, n- or p-type, heterojunctions of different materials are typically fabricated to produce diode-like current rectification and photovoltaic response. Recently, artificial, stable and substitutional doping of MoS2 into n- and p-type has been demonstrated. MoS2 is an interesting material to use for optoelectronic applications due to the potential of low-cost production in large quantities, strong light-matter interactions and chemical stability. Here we report the characterization of the optoelectronic properties of vertical homojunctions made by stacking few-layer flakes of MoS2:Fe (n-type) and MoS2:Nb (p-type). The junctions exhibit a peak external quantum efficiency of 4.7 %, a maximum open circuit voltage of 0.51 V, they are stable in air and their rectification characteristics and photovoltaic response are in excellent agreement to the Shockley diode model. The gate-tunability of the maximum output power, the ideality factor and the shunt resistance indicate that the dark current is dominated by trap-assisted recombination and that the photocurrent collection depends strongly on the spatial extent of the space charge region. We demonstrate a response time faster than 80 ms and highlight the potential to integrate such devices into quasi-transparent and flexible optoelectronics.
△ Less
Submitted 10 January, 2017;
originally announced February 2017.
-
Micro-reflectance and transmittance spectroscopy: a versatile and powerful tool to characterize 2D materials
Authors:
Riccardo Frisenda,
Yue Niu,
Patricia Gant,
Aday J. Molina-Mendoza,
Robert Schmidt,
Rudolf Bratschitsch,
Jinxin Liu,
Lei Fu,
Dumitru Dumcenco,
Andras Kis,
David Perez De Lara,
Andres Castellanos-Gomez
Abstract:
Optical spectroscopy techniques such as differential reflectance and transmittance have proven to be very powerful techniques to study 2D materials. However, a thorough description of the experimental setups needed to carry out these measurements is lacking in the literature. We describe a versatile optical microscope setup to carry out differential reflectance and transmittance spectroscopy in 2D…
▽ More
Optical spectroscopy techniques such as differential reflectance and transmittance have proven to be very powerful techniques to study 2D materials. However, a thorough description of the experimental setups needed to carry out these measurements is lacking in the literature. We describe a versatile optical microscope setup to carry out differential reflectance and transmittance spectroscopy in 2D materials with a lateral resolution of ~1 micron in the visible and near-infrared part of the spectrum. We demonstrate the potential of the presented setup to determine the number of layers of 2D materials and to characterize their fundamental optical properties such as excitonic resonances. We illustrate its performance by studying mechanically exfoliated and chemical vapor-deposited transition metal dichalcogenide samples.
△ Less
Submitted 13 December, 2016;
originally announced December 2016.
-
Highly responsive UV-photodetectors based on single electrospun TiO2 nanofibres
Authors:
Aday J. Molina-Mendoza,
Alicia Moya,
Riccardo Frisenda,
Simon A. Svatek,
Patricia Gant,
Sergio Gonzalez-Abad,
Elisa Antolin,
Nicolás Agraït,
Gabino Rubio-Bollinger,
David Perez de Lara,
Juan J. Vilatela,
Andres Castellanos-Gomez
Abstract:
In this work we study the optoelectronic properties of individual TiO2 fibres produced through coupled sol-gel and electrospinning, by depositing them onto pre-patterned Ti/Au electrodes on SiO2/Si substrates. Transport measurements in the dark give a conductivity above 2*10^-5 S, which increases up to 8*10^-5 S in vacuum. Photocurrent measurements under UV-irradiation show high sensitivity (respo…
▽ More
In this work we study the optoelectronic properties of individual TiO2 fibres produced through coupled sol-gel and electrospinning, by depositing them onto pre-patterned Ti/Au electrodes on SiO2/Si substrates. Transport measurements in the dark give a conductivity above 2*10^-5 S, which increases up to 8*10^-5 S in vacuum. Photocurrent measurements under UV-irradiation show high sensitivity (responsivity of 90 A/W for 375 nm wavelength) and a response time to illumination of ~ 5 s, which is superior to state-of-the-art TiO2-based UV photodetectors. Both responsivity and response speed are higher in air than in vacuum, due to oxygen adsorbed on the TiO2 surface which traps photoexcited free electrons in the conduction band, thus reducing the recombination processes. The photodetectors are sensitive to light polarization, with an anisotropy ratio of 12%. These results highlight the interesting combination of large surface area and low 1D transport resistance in electrospun TiO2 fibres. The simplicity of the sol-gel/electrospinning synthesis method, combined with a fast response and high responsivity makes them attractive candidates for UV-photodetection in ambient conditions. We anticipate their high (photo) conductance is also relevant for photocatalysis and dye-sensitized solar cells.
△ Less
Submitted 3 November, 2016;
originally announced November 2016.
-
Coloring decompositions of complete geometric graphs
Authors:
Clemens Huemer,
Dolores Lara,
Christian Rubio-Montiel
Abstract:
A decomposition of a non-empty simple graph $G$ is a pair $[G,P]$, such that $P$ is a set of non-empty induced subgraphs of $G$, and every edge of $G$ belongs to exactly one subgraph in $P$. The chromatic index $χ'([G,P])$ of a decomposition $[G,P]$ is the smallest number $k$ for which there exists a $k$-coloring of the elements of $P$ in such a way that: for every element of $P$ all of its edges…
▽ More
A decomposition of a non-empty simple graph $G$ is a pair $[G,P]$, such that $P$ is a set of non-empty induced subgraphs of $G$, and every edge of $G$ belongs to exactly one subgraph in $P$. The chromatic index $χ'([G,P])$ of a decomposition $[G,P]$ is the smallest number $k$ for which there exists a $k$-coloring of the elements of $P$ in such a way that: for every element of $P$ all of its edges have the same color, and if two members of $P$ share at least one vertex, then they have different colors. A long standing conjecture of Erdős-Faber-Lovász states that every decomposition $[K_n,P]$ of the complete graph $K_n$ satisfies $χ'([K_n,P])\leq n$. In this paper we work with geometric graphs, and inspired by this formulation of the conjecture, we introduce the concept of chromatic index of a decomposition of the complete geometric graph. We present bounds for the chromatic index of several types of decompositions when the vertices of the graph are in general position. We also consider the particular case in which the vertices are in convex position and present bounds for the chromatic index of a few types of decompositions.
△ Less
Submitted 21 March, 2019; v1 submitted 5 October, 2016;
originally announced October 2016.
-
Relations Between a Topological Game and the $G_δ$-diagonal property
Authors:
Leandro F. Aurichi,
Dione A. Lara
Abstract:
We present a selection principle $S_1(\mathcal{O},\mathcal{H})$ that characterizes the $G_δ$-diagonal property. We also present a topological game induced by this selection principle and we study the relations between this game and the $G_δ$-property. Finally, we give some applications and examples.
We present a selection principle $S_1(\mathcal{O},\mathcal{H})$ that characterizes the $G_δ$-diagonal property. We also present a topological game induced by this selection principle and we study the relations between this game and the $G_δ$-property. Finally, we give some applications and examples.
△ Less
Submitted 22 November, 2016; v1 submitted 22 February, 2016;
originally announced February 2016.
-
Enhanced Visibility of MoS2, MoSe2, WSe2 and Black Phosphorus: Making Optical Identification of 2D Semiconductors Easier
Authors:
Gabino Rubio-Bollinger,
Ruben Guerrero,
David Perez de Lara,
Jorge Quereda,
Luis Vaquero-Garzon,
Nicolas Agraït,
Rudolf Bratschitsch,
Andres Castellanos-Gomez
Abstract:
We explore the use of Si3N4/Si substrates as a substitute of the standard SiO2/Si substrates employed nowadays to fabricate nanodevices based on 2D materials. We systematically study the visibility of several 2D semiconducting materials that are attracting a great deal of interest in nanoelectronics and optoelectronics: MoS2, MoSe2, WSe2 and black phosphorus. We find that the use of Si3N4/Si subst…
▽ More
We explore the use of Si3N4/Si substrates as a substitute of the standard SiO2/Si substrates employed nowadays to fabricate nanodevices based on 2D materials. We systematically study the visibility of several 2D semiconducting materials that are attracting a great deal of interest in nanoelectronics and optoelectronics: MoS2, MoSe2, WSe2 and black phosphorus. We find that the use of Si3N4/Si substrates provides an increase of the optical contrast up to a 50%-100% and also the maximum contrast shifts towards wavelength values optimal for human eye detection, making optical identification of 2D semiconductors easier.
△ Less
Submitted 17 November, 2015;
originally announced November 2015.
-
An investigation of the Eigenvalue Calibration Method (ECM) using GASP for non-imaging and imaging detectors
Authors:
Gillian Kyne,
David Lara,
Gregg Hallinan,
Michael Redfern,
Andrew Shearer
Abstract:
Polarised light from astronomical targets can yield a wealth of information about their source radiation mechanisms, and about the geometry of the scattered light regions. Optical observations, of both the linear and circular polarisation components, have been impeded due to non-optimised instrumentation. The need for suitable observing conditions and the availability of luminous targets are also…
▽ More
Polarised light from astronomical targets can yield a wealth of information about their source radiation mechanisms, and about the geometry of the scattered light regions. Optical observations, of both the linear and circular polarisation components, have been impeded due to non-optimised instrumentation. The need for suitable observing conditions and the availability of luminous targets are also limiting factors. GASP uses division of amplitude polarimeter (DOAP) (Compain and Drevillon) to measure the four components of the Stokes vector simultaneously, which eliminates the constraints placed upon the need for moving parts during observation, and offers a real-time complete measurement of polarisation. Results from the GASP calibration are presented in this work for both a 1D detector system, and a pixel-by-pixel analysis on a 2D detector system. Following Compain et al. we use the Eigenvalue Calibration Method (ECM) to measure the polarimetric limitations of the instrument for each of the two systems. Consequently, the ECM is able to compensate for systematic errors introduced by the calibration optics, and it also accounts for all optical elements of the polarimeter in the output. Initial laboratory results of the ECM are presented, using APD detectors, where errors of 0.2% and 0.1° were measured for the degree of linear polarisation and polarisation angle respectively. Channel-to-channel image registration is an important aspect of 2-D polarimetry. We present our calibration results of the measured Mueller matrix of each sample, used by the ECM. A set of Zenith flat-field images were recorded during an observing campaign at the Palomar 200 inch telescope in November 2012. From these we show the polarimetric errors from the spatial polarimetry indicating both the stability and absolute accuracy of GASP.
△ Less
Submitted 17 September, 2015;
originally announced September 2015.
-
Curves with Canonical Models on Scrolls
Authors:
Danielle Lara,
Simone Marchesi,
Renato Vidal Martins
Abstract:
Let $C$ be an integral and projective curve whose canonical model $C'$ lies on a rational normal scroll $S$ of dimension $n$. We mainly study some properties on $C$, such as gonality and the kind of singularities, in the case where $n=2$ and $C$ is non-Gorenstein, and in the case where $n=3$, the scroll $S$ is smooth, and $C'$ is a local complete intersection inside $S$. We also prove that a ratio…
▽ More
Let $C$ be an integral and projective curve whose canonical model $C'$ lies on a rational normal scroll $S$ of dimension $n$. We mainly study some properties on $C$, such as gonality and the kind of singularities, in the case where $n=2$ and $C$ is non-Gorenstein, and in the case where $n=3$, the scroll $S$ is smooth, and $C'$ is a local complete intersection inside $S$. We also prove that a rational monomial curve with just one singular point lies on a surface scroll if and only if its gonality is at most $3$, and that it lies on a threefold scroll if and only if its gonality is at most $4$.
△ Less
Submitted 26 February, 2015;
originally announced February 2015.
-
Transverse ratchet effect and superconducting vortices: Simulation and experiment
Authors:
L. Dinis,
D. Perez de Lara,
E. M. Gonzalez,
J. V. Anguita,
J. M. R. Parrondo,
J. L. Vicent
Abstract:
A transverse ratchet effect has been measured in magnetic/superconducting hybrid films fabricated by electron beam lithography and magnetron sputtering techniques. The samples are Nb films grown on top of an array of Ni nanotriangles. Injecting an ac current parallel to the triangle reflection symmetry axis yields an output dc voltage perpendicular to the current, due to a net motion of flux vorti…
▽ More
A transverse ratchet effect has been measured in magnetic/superconducting hybrid films fabricated by electron beam lithography and magnetron sputtering techniques. The samples are Nb films grown on top of an array of Ni nanotriangles. Injecting an ac current parallel to the triangle reflection symmetry axis yields an output dc voltage perpendicular to the current, due to a net motion of flux vortices in the superconductor. The effect is reproduced by numerical simulations of vortices as Langevin particles with realistic parameters. Simulations provide an intuitive picture of the ratchet mechanism, revealing the fundamental role played by the random intrinsic pinning of the superconductor.
△ Less
Submitted 23 September, 2014;
originally announced September 2014.
-
Balanced modular parameterizations
Authors:
Tim Huber,
Danny Lara,
Esteban Melendez
Abstract:
For prime levels $5 \le p \le 19$, sets of $Γ_{0}(p)$-permuted theta quotients are constructed that generate the graded rings of modular forms of positive integer weight for $Γ_{1}(p)$. An explicit formulation of the permutation representation and several applications are given, including a new representation for the number of $t$-core partitions. The $Γ_{0}(p)$-action induces coefficient symmetri…
▽ More
For prime levels $5 \le p \le 19$, sets of $Γ_{0}(p)$-permuted theta quotients are constructed that generate the graded rings of modular forms of positive integer weight for $Γ_{1}(p)$. An explicit formulation of the permutation representation and several applications are given, including a new representation for the number of $t$-core partitions. The $Γ_{0}(p)$-action induces coefficient symmetries within representations for modular forms and invariance subgroups for coupled systems of differential equations. The symmetry for levels $p = 5,7,11$ is linked to the Kleinian automorphism groups.
△ Less
Submitted 26 May, 2014;
originally announced May 2014.
-
Demonstration of the Inverse Square Law with the aid of a Tablet/smartphone
Authors:
Leonardo Pereira Vieira,
Vitor de Oliveira Moraes Lara,
Dayanne Fernandes Amaral
Abstract:
In this paper we show how to obtain the Inverse-square law of the distance to the light intensity emitted from a small source in a simple, fast and with good precision way. With the aid of two smartphones, free apps and a ruler, one is able to measure the distances between the devices listed (one as a source and the other as a measuring light intensity) and the respective light intensities measure…
▽ More
In this paper we show how to obtain the Inverse-square law of the distance to the light intensity emitted from a small source in a simple, fast and with good precision way. With the aid of two smartphones, free apps and a ruler, one is able to measure the distances between the devices listed (one as a source and the other as a measuring light intensity) and the respective light intensities measured by the probeware in the device. The ease of reproduction of the proposed experiment and the penetration of the use of tablets and smartphones among students and teachers, could make the proposed activity a good alternative to the introduction of physical phenomena which exhibit the same functional dependence, such as the Law of Newton's Universal Gravitation and Coulomb's Law.
△ Less
Submitted 18 March, 2014;
originally announced March 2014.
-
Macro photography with a tablet: applications on Science Teaching
Authors:
Leonardo Pereira Vieira,
Vitor de Oliveira Moraes Lara
Abstract:
In this work we present a simple way to get Macro photography (enlarged photographs) using a tablet or phone. We initially discuss the technique, which is essentially the accommodation of a drop of water on the camera lens. Next, we explore some applications to science teaching in primary and secondary levels. As discussed in the text, the simplicity and power of the technique may make it a good t…
▽ More
In this work we present a simple way to get Macro photography (enlarged photographs) using a tablet or phone. We initially discuss the technique, which is essentially the accommodation of a drop of water on the camera lens. Next, we explore some applications to science teaching in primary and secondary levels. As discussed in the text, the simplicity and power of the technique may make it a good teaching tool for use in various disciplines such as Science, Biology and Physics.
△ Less
Submitted 23 May, 2013;
originally announced July 2013.
-
The Galway Astronomical Stokes Polarimeter: An All-Stokes Optical Polarimeter with Ultra-High Time Resolution
Authors:
Patrick Collins,
Gillian Kyne,
David Lara,
Michael Redfern,
Andy Shearer,
Brendan Sheehan
Abstract:
Many astronomical objects emit polarised light, which can give information both about their source mechanisms, and about (scattering) geometry in their source regions. To date (mostly) only the linearly polarised components of the emission have been observed in stellar sources. Observations have been constrained because of instrumental considerations to periods of excellent observing conditions, a…
▽ More
Many astronomical objects emit polarised light, which can give information both about their source mechanisms, and about (scattering) geometry in their source regions. To date (mostly) only the linearly polarised components of the emission have been observed in stellar sources. Observations have been constrained because of instrumental considerations to periods of excellent observing conditions, and to steady, slowly or periodically-varying sources. This leaves a whole range of interesting objects beyond the range of observation at present. The Galway Astronomical Stokes Polarimeter (GASP) has been developed to enable us to make observations on these very sources. GASP measures the four components of the Stokes Vector simultaneously over a broad wavelength range 400-800nm., with a time resolution of order microseconds given suitable detectors and a bright source - this is possible because the optical design contains no moving or modulating components. The initial design of GASP is presented and we include some preliminary observational results demonstrating that components of the Stokes vector can be measured to <1% in conditions of poor atmospheric stability. Issues of efficiency and stability are addressed. An analysis of suitable astronomical targets, demanding the unique properties of GASP, is also presented.
△ Less
Submitted 29 May, 2013;
originally announced May 2013.
-
Differential equations for septic theta functions
Authors:
Tim Huber,
Danny Lara
Abstract:
We demonstrate that quotients of septic theta functions appearing in S. Ramanujan's Notebooks and in F. Klein's work satisfy a new coupled system of nonlinear differential equations with interesting symmetric form. This differential system bears a close resemblance to an analogous system for quintic theta functions. The proof extends a technique used by Ramanujan to prove the classical differentia…
▽ More
We demonstrate that quotients of septic theta functions appearing in S. Ramanujan's Notebooks and in F. Klein's work satisfy a new coupled system of nonlinear differential equations with interesting symmetric form. This differential system bears a close resemblance to an analogous system for quintic theta functions. The proof extends a technique used by Ramanujan to prove the classical differential system for normalized Eisenstein series on the full modular group. In the course of our work, we show that Klein's quartic relation induces new symmetric representations for low weight Eisenstein series in terms of weight one modular forms of level seven.
△ Less
Submitted 2 April, 2013;
originally announced April 2013.
-
Geometric achromatic and pseudoachromatic indices
Authors:
O. Aichholzer,
G. Araujo-Pardo,
N. García-Colín,
T. Hackl,
D. Lara,
C. Rubio-Montiel,
J. Urrutia
Abstract:
The pseudoachromatic index of a graph is the maximum number of colors that can be assigned to its edges, such that each pair of different colors is incident to a common vertex. If for each vertex its incident edges have different color, then this maximum is known as achromatic index. Both indices have been widely studied. A geometric graph is a graph drawn in the plane such that its vertices are p…
▽ More
The pseudoachromatic index of a graph is the maximum number of colors that can be assigned to its edges, such that each pair of different colors is incident to a common vertex. If for each vertex its incident edges have different color, then this maximum is known as achromatic index. Both indices have been widely studied. A geometric graph is a graph drawn in the plane such that its vertices are points in general position, and its edges are straight-line segments. In this paper we extend the notion of pseudoachromatic and achromatic indices for geometric graphs, and present results for complete geometric graphs. In particular, we show that for $n$ points in convex position the achromatic index and the pseudoachromatic index of the complete geometric graph are $\lfloor \tfrac{n^2+n}{4} \rfloor$.
△ Less
Submitted 19 March, 2013;
originally announced March 2013.