-
Bridging the gap between photovoltaics R&D and manufacturing with data-driven optimization
Authors:
Felipe Oviedo,
Zekun Ren,
Xue Hansong,
Siyu Isaac Parker Tian,
Kaicheng Zhang,
Mariya Layurova,
Thomas Heumueller,
Ning Li,
Erik Birgersson,
Shijing Sun,
Benji Mayurama,
Ian Marius Peters,
Christoph J. Brabec,
John Fisher III,
Tonio Buonassisi
Abstract:
Novel photovoltaics, such as perovskites and perovskite-inspired materials, have shown great promise due to high efficiency and potentially low manufacturing cost. So far, solar cell R&D has mostly focused on achieving record efficiencies, a process that often results in small batches, large variance, and limited understanding of the physical causes of underperformance. This approach is intensive…
▽ More
Novel photovoltaics, such as perovskites and perovskite-inspired materials, have shown great promise due to high efficiency and potentially low manufacturing cost. So far, solar cell R&D has mostly focused on achieving record efficiencies, a process that often results in small batches, large variance, and limited understanding of the physical causes of underperformance. This approach is intensive in time and resources, and ignores many relevant factors for industrial production, particularly the need for high reproducibility and high manufacturing yield, and the accompanying need of physical insights. The record-efficiency paradigm is effective in early-stage R&D, but becomes unsuitable for industrial translation, requiring a repetition of the optimization procedure in the industrial setting. This mismatch between optimization objectives, combined with the complexity of physical root-cause analysis, contributes to decade-long timelines to transfer new technologies into the market. Based on recent machine learning and technoeconomic advances, our perspective articulates a data-driven optimization framework to bridge R&D and manufacturing optimization approaches. We extend the maximum-efficiency optimization paradigm by considering two additional dimensions: a technoeconomic figure of merit and scalable physical inference. Our framework naturally aligns different stages of technology development with shared optimization objectives, and accelerates the optimization process by providing physical insights.
△ Less
Submitted 28 April, 2020;
originally announced April 2020.
-
Perovskite PV-powered RFID: enabling low-cost self-powered IoT sensors
Authors:
Sai Nithin R. Kantareddy,
Ian Mathews,
Shijing Sun,
Mariya Layurova,
Janak Thapa,
Juan-Pablo Correa-Baena,
Rahul Bhattacharyya Tonio Buonassisi,
Sanjay E. Sarma,
Ian Marius Peters
Abstract:
Photovoltaic (PV) cells have the potential to serve as on-board power sources for low-power IoT devices. Here, we explore the use of perovskite solar cells to power Radio Frequency (RF) backscatter-based IoT devices with a few μW power demand. Perovskites are suitable for low-cost, high-performance, low-temperature processing, and flexible light energy harvesting that hold the possibility to signi…
▽ More
Photovoltaic (PV) cells have the potential to serve as on-board power sources for low-power IoT devices. Here, we explore the use of perovskite solar cells to power Radio Frequency (RF) backscatter-based IoT devices with a few μW power demand. Perovskites are suitable for low-cost, high-performance, low-temperature processing, and flexible light energy harvesting that hold the possibility to significantly extend the range and lifetime of current backscatter techniques such as Radio Frequency Identification (RFID). For these reasons, perovskite solar cells are prominent candidates for future low-power wireless applications. We report on realizing a functional perovskite-powered wireless temperature sensor with 4 m communication range. We use a 10.1% efficient perovskite PV module generating an output voltage of 4.3 V with an active area of 1.06 cm2 under 1 sun illumination, with AM 1.5G spectrum, to power a commercial off-the-shelf RFID IC, requiring 10 - 45 μW of power. Having an on-board energy harvester provides extra-energy to boost the range of the sensor (5x) in addition to providing energy to carry out high-volume sensor measurements (hundreds of measurements per min). Our evaluation of the prototype suggests that perovskite photovoltaic cells are able to meet the energy needs to enable fully autonomous low-power RF backscatter applications of the future. We conclude with an outlook into a range of applications that we envision to leverage the synergies offered by combining perovskite photovoltaics and RFID.
△ Less
Submitted 19 September, 2019;
originally announced September 2019.
-
Self-powered sensors enabled by wide-bandgap perovskite indoor photovoltaic cells
Authors:
Ian Mathews,
Sai Nithin Reddy Kantareddy,
Shijing Sun,
Mariya Layurova,
Janak Thapa,
Juan-Pablo Correa-Baena,
Rahul Bhattacharyya,
Tonio Buonassisi,
Sanjay Sarma,
Ian Marius Peters
Abstract:
We present a new approach to ubiquitous sensing for indoor applications, using high-efficiency and low-cost indoor perovksite photovoltaic cells as external power sources for backscatter sensors. We demonstrate wide-bandgap perovskite photovoltaic cells for indoor light energy harvesting with the 1.63eV and 1.84 eV devices demonstrate efficiencies of 21% and 18.5% respectively under indoor compact…
▽ More
We present a new approach to ubiquitous sensing for indoor applications, using high-efficiency and low-cost indoor perovksite photovoltaic cells as external power sources for backscatter sensors. We demonstrate wide-bandgap perovskite photovoltaic cells for indoor light energy harvesting with the 1.63eV and 1.84 eV devices demonstrate efficiencies of 21% and 18.5% respectively under indoor compact fluorescent lighting, with a champion open-circuit voltage of 0.95 V in a 1.84 eV cell under a light intensity of 0.16 mW/cm2. Subsequently, we demonstrate a wireless temperature sensor self-powered by a perovskite indoor light-harvesting module. We connect three perovskite photovoltaic cells in series to create a module that produces 14.5 uW output power under 0.16 mW/cm2 of compact fluorescent illumination with an efficiency of 13.2%. We use this module as an external power source for a battery-assisted RFID temperature sensor and demonstrate a read range by of 5.1 meters while maintaining very high frequency measurements every 1.24 seconds. Our combined indoor perovskite photovoltaic modules and backscatter radio-frequency sensors are further discussed as a route to ubiquitous sensing in buildings given their potential to be manufactured in an integrated manner at very low-cost, their lack of a need for battery replacement and the high frequency data collection possible.
△ Less
Submitted 12 September, 2019;
originally announced September 2019.
-
Embedding Physics Domain Knowledge into a Bayesian Network Enables Layer-by-Layer Process Innovation for Photovoltaics
Authors:
Zekun Ren,
Felipe Oviedo,
Muang Thway,
Siyu I. P. Tian,
Yue Wang,
Hansong Xue,
Jose Dario Perea,
Mariya Layurova,
Thomas Heumueller,
Erik Birgersson,
Armin Aberle,
Christoph J. Brabec,
Rolf Stangl,
Shijing Sun,
Qianxiao Li,
Fen Lin,
Ian Marius Peters,
Tonio Buonassisi
Abstract:
Process optimization of photovoltaic devices is a time-intensive, trial and error endeavor, without full transparency of the underlying physics, and with user-imposed constraints that may or may not lead to a global optimum. Herein, we demonstrate that embedding physics domain knowledge into a Bayesian network enables an optimization approach that identifies the root cause(s) of underperformance w…
▽ More
Process optimization of photovoltaic devices is a time-intensive, trial and error endeavor, without full transparency of the underlying physics, and with user-imposed constraints that may or may not lead to a global optimum. Herein, we demonstrate that embedding physics domain knowledge into a Bayesian network enables an optimization approach that identifies the root cause(s) of underperformance with layer by-layer resolution and reveals alternative optimal process windows beyond global black-box optimization. Our Bayesian-network approach links process conditions to materials descriptors (bulk and interface properties, e.g., bulk lifetime, doping, and surface recombination) and device performance parameters (e.g., cell efficiency), using a Bayesian inference framework with an autoencoder-based surrogate device-physics model that is 100x faster than numerical solvers. With the trained surrogate model, our approach is robust and reduces significantly the time consuming experimentalist intervention, even with small numbers of fabricated samples. To demonstrate our method, we perform layer-by-layer optimization of GaAs solar cells. In a single cycle of learning, we find an improved growth temperature for the GaAs solar cells without any secondary measurements, and demonstrate a 6.5% relative AM1.5G efficiency improvement above baseline and traditional black-box optimization methods.
△ Less
Submitted 3 November, 2019; v1 submitted 25 July, 2019;
originally announced July 2019.
-
Accelerating Photovoltaic Materials Development via High-Throughput Experiments and Machine-Learning-Assisted Diagnosis
Authors:
Shijing Sun,
Noor T. P. Hartono,
Zekun D. Ren,
Felipe Oviedo,
Antonio M. Buscemi,
Mariya Layurova,
De Xin Chen,
Tofunmi Ogunfunmi,
Janak Thapa,
Savitha Ramasamy,
Charles Settens,
Brian L. DeCost,
Aaron Gilad Kusne,
Zhe Liu,
Siyu I. P. Tian,
I. Marius Peters,
Juan-Pablo Correa-Baena,
Tonio Buonassisi
Abstract:
Accelerating the experimental cycle for new materials development is vital for addressing the grand energy challenges of the 21st century. We fabricate and characterize 75 unique halide perovskite-inspired solution-based thin-film materials within a two-month period, with 87% exhibiting band gaps between 1.2 eV and 2.4 eV that are of interest for energy-harvesting applications. This increased thro…
▽ More
Accelerating the experimental cycle for new materials development is vital for addressing the grand energy challenges of the 21st century. We fabricate and characterize 75 unique halide perovskite-inspired solution-based thin-film materials within a two-month period, with 87% exhibiting band gaps between 1.2 eV and 2.4 eV that are of interest for energy-harvesting applications. This increased throughput is enabled by streamlining experimental workflows, developing a set of precursors amenable to high-throughput synthesis, and developing machine-learning assisted diagnosis. We utilize a deep neural network to classify compounds based on experimental X-ray diffraction data into 0D, 2D, and 3D structures more than 10 times faster than human analysis and with 90% accuracy. We validate our methods using lead-halide perovskites and extend the application to novel lead-free compositions. The wider synthesis window and faster cycle of learning enables three noteworthy scientific findings: (1) we realize four inorganic layered perovskites, A3B2Br9 (A = Cs, Rb; B = Bi, Sb) in thin-film form via one-step liquid deposition; (2) we report a multi-site lead-free alloy series that was not previously described in literature, Cs3(Bi1-xSbx)2(I1-xBrx)9; and (3) we reveal the effect on bandgap (reduction to <2 eV) and structure upon simultaneous alloying on the B-site and X-site of Cs3Bi2I9 with Sb and Br. This study demonstrates that combining an accelerated experimental cycle of learning and machine-learning based diagnosis represents an important step toward realizing fully-automated laboratories for materials discovery and development.
△ Less
Submitted 25 November, 2018;
originally announced December 2018.
