-
Characterization of hydrogenated amorphous silicon sensors on polyimide flexible substrate
Authors:
M. Menichelli,
L. Antognini,
S. Aziz,
A. Bashiri,
M. Bizzarri,
L. Calcagnile,
M. Caprai,
D. Caputo,
A. P. Caricato,
R. Catalano,
D. Chilà,
G. A. P. Cirrone,
T. Croci,
G. Cuttone,
G. De Cesare,
S. Dunand,
M. Fabi,
L. Frontini,
C. Grimani,
M. Ionica,
K. Kanxheri,
M. Large,
V. Liberali,
N. Lovecchio,
M. Martino
, et al. (28 additional authors not shown)
Abstract:
Hydrogenated amorphous silicon (a-Si:H) is a material having an intrinsically high radiation hardness that can be deposited on flexible substrates like Polyimide. For these properties a-Si:H can be used for the production of flexible sensors. a-Si:H sensors can be successfully utilized in dosimetry, beam monitoring for particle physics (x-ray, electron, gamma-ray and proton detection) and radiothe…
▽ More
Hydrogenated amorphous silicon (a-Si:H) is a material having an intrinsically high radiation hardness that can be deposited on flexible substrates like Polyimide. For these properties a-Si:H can be used for the production of flexible sensors. a-Si:H sensors can be successfully utilized in dosimetry, beam monitoring for particle physics (x-ray, electron, gamma-ray and proton detection) and radiotherapy, radiation flux measurement for space applications (study of solar energetic particles and stellar events) and neutron flux measurements. In this paper we have studied the dosimetric x-ray response of n-i-p diodes deposited on Polyimide. We measured the linearity of the photocurrent response to x-rays versus dose-rate from which we have extracted the dosimetric x-ray sensitivity at various bias voltages. In particular low bias voltage operation has been studied to assess the high energy efficiency of these kind of sensor. A measurement of stability of x-ray response versus time has been shown. The effect of detectors annealing has been studied. Operation under bending at various bending radii is also shown.
△ Less
Submitted 30 September, 2023;
originally announced October 2023.
-
A Hydrogenated amorphous silicon detector for Space Weather Applications
Authors:
Catia Grimani,
Michele Fabi,
Federico Sabbatini,
Mattia Villani,
Lucio Calcagnile,
Anna Paola Caricato,
Roberto Catalano,
Giuseppe Antonio Pablo Cirrone,
Tommaso Croci,
Giacomo Cuttone,
Sylvain Dunand,
Luca Frontini,
Maria Ionica,
Keida Kanxheri,
Matthew Large,
Valentino Liberali,
Maurizio Martino,
Giuseppe Maruccio,
Giovanni Mazza,
Mauro Menichelli,
Anna Grazia Monteduro,
Arianna Morozzi,
Francesco Moscatelli,
Stefania Pallotta,
Daniele Passeri
, et al. (13 additional authors not shown)
Abstract:
The characteristics of a hydrogenated amorphous silicon (a-Si:H) detector are presented here for monitoring in space solar flares and the evolution of large energetic proton events up to hundreds of MeV. The a-Si:H presents an excellent radiation hardness and finds application in harsh radiation environments for medical purposes, for particle beam characterization and in space weather science and…
▽ More
The characteristics of a hydrogenated amorphous silicon (a-Si:H) detector are presented here for monitoring in space solar flares and the evolution of large energetic proton events up to hundreds of MeV. The a-Si:H presents an excellent radiation hardness and finds application in harsh radiation environments for medical purposes, for particle beam characterization and in space weather science and applications. The critical flux detection threshold for solar X rays, soft gamma rays, electrons and protons is discussed in detail.
△ Less
Submitted 1 September, 2023; v1 submitted 1 February, 2023;
originally announced February 2023.
-
Development of thin hydrogenated amorphous silicon detectors on a flexible substrate
Authors:
M. Menichelli,
M. Bizzarri,
L. Calcagnile,
M. Caprai,
A. P. Caricato,
R. Catalano,
G. A. P. Cirrone,
T. Croci,
G. Cuttone,
S. Dunand,
M. Fabi,
L. Frontini,
B. Gianfelici,
C. Grimani,
M. Ionica,
K. Kanxheri,
M. Large,
V. Liberali,
M. Martino,
G. Maruccio,
G. Mazza,
A. G. Monteduro,
A. Morozzi,
F. Moscatelli,
S. Pallotta
, et al. (18 additional authors not shown)
Abstract:
The HASPIDE (Hydrogenated Amorphous Silicon PIxels DEtectors) project aims at the development of thin hydrogenated amorphous silicon (a-Si:H) detectors on flexible substrates (mostly Polyimide) for beam monitoring, neutron detection and space applications. Since a-Si:H is a material with superior radiation hardness, the benefit for the above-mentioned applications can be appreciated mostly in radi…
▽ More
The HASPIDE (Hydrogenated Amorphous Silicon PIxels DEtectors) project aims at the development of thin hydrogenated amorphous silicon (a-Si:H) detectors on flexible substrates (mostly Polyimide) for beam monitoring, neutron detection and space applications. Since a-Si:H is a material with superior radiation hardness, the benefit for the above-mentioned applications can be appreciated mostly in radiation harsh environments. Furthermore, the possibility to deposit this material on flexible substrates like Polyimide (PI), polyethylene naphthalate (PEN) or polyethylene terephthalate (PET) facilitates the usage of these detectors in medical dosimetry, beam flux and beam profile measurements. Particularly interesting is its use when positioned directly on the flange of the vacuum-to-air separation interface in a beam line, as well as other applications where a thin self-standing radiation flux detector is envisaged. In this paper, the HASPIDE project will be described and some preliminary results on PI and glass substrates will be reported.
△ Less
Submitted 30 November, 2022;
originally announced November 2022.
-
The ASTAROTH project
Authors:
Davide D'Angelo,
Andrea Zani,
Franco Alessandria,
Alessandro Andreani,
Andrea Castoldi,
Simone Coelli,
Daniele Cortis,
Giuseppe Di Carlo,
Luca Frontini,
Niccolò Gallice,
Chiara Guazzoni,
Valentino Liberali,
Mauro Monti,
Donato Orlandi,
Massimo Sorbi,
Alberto Stabile,
Marco Statera
Abstract:
The most discussed topic in direct search for dark matter is arguably the verification of the DAMA claim. In fact, the observed annual modulation of the signal rate in an array of NaI(Tl) detectors can be interpreted as the awaited signature of dark matter interaction. Several experimental groups are currently engaged in the attempt to verify such a game-changing claim with the same target materia…
▽ More
The most discussed topic in direct search for dark matter is arguably the verification of the DAMA claim. In fact, the observed annual modulation of the signal rate in an array of NaI(Tl) detectors can be interpreted as the awaited signature of dark matter interaction. Several experimental groups are currently engaged in the attempt to verify such a game-changing claim with the same target material. However, all present-day designs are based on a light readout via Photomultiplier Tubes, whose high noise makes it challenging to achieve a low background in the 1-6 keV energy region of the signal. Even harder it would be to break below 1 keV energy threshold, where a large fraction of the signal potentially awaits to be uncovered. ASTAROTH is an R\&D project to overcome these limitations by using Silicon Photomultipliers (SiPM) matrices to collect scintillation light from NaI(Tl). The all-active design based on cubic crystals is operating in the 87-150 K temperature range where SiPM noise can be even a hundred times lower with respect to PMTs. The cryostat was developed following an innovative design and is based on a copper chamber immersed in a liquid argon bath that can be instrumented as a veto detector. We have characterized separately the crystal and the SiPM response at low temperature and we have proceeded to the first operation of a NaI(Tl) crystal read by SiPM in cryogeny.
△ Less
Submitted 4 November, 2022;
originally announced November 2022.
-
Timespot1: A 28nm CMOS Pixel Read-Out ASIC for 4D Tracking at High Rates
Authors:
Sandro Cadeddu,
Luca Frontini,
Adriano Lai,
Valentino Liberali,
Lorenzo Piccolo,
Angelo Rivetti,
Jafar Shojaii,
Alberto Stabile
Abstract:
We present the first characterization results of Timespot1, an ASIC designed in CMOS 28 nm technology, featuring a $32 \times 32$ pixel matrix with a pitch of $55 ~ μm$. Timespot1 is the first small-size prototype, conceived to readout fine-pitch pixels with single-hit time resolution below $50 ~ ps_\text{rms}$ and input rates of several hundreds of kilohertz per pixel. Such experimental condition…
▽ More
We present the first characterization results of Timespot1, an ASIC designed in CMOS 28 nm technology, featuring a $32 \times 32$ pixel matrix with a pitch of $55 ~ μm$. Timespot1 is the first small-size prototype, conceived to readout fine-pitch pixels with single-hit time resolution below $50 ~ ps_\text{rms}$ and input rates of several hundreds of kilohertz per pixel. Such experimental conditions will be typical of the next generation of high-luminosity collider experiments, from the LHC run5 and beyond. Each pixel of the ASIC includes a charge amplifier, a discriminator, and a Time-to-Digital Converter with time resolution indicatively of $22.6 ~ ps_\text{rms}$ and maximum readout rates (per pixel) of $3 ~ MHz$. To respect system-level constraints, the timing performance has been obtained keeping the power budget per pixel below $40 ~ μW$. The ASIC has been tested and characterised in the laboratory concerning its performance in terms of time resolution, power budget and sustainable rates. The ASIC will be hybridized on a matched $32 \times 32$ pixel sensor matrix and will be tested under laser beam and Minimum Ionizing Particles in the laboratory and at test beams. In this paper we present a description of the ASIC operation and the first results obtained from characterization tests concerning its performance.
△ Less
Submitted 22 December, 2022; v1 submitted 27 September, 2022;
originally announced September 2022.
-
First Measurements on the Timespot1 ASIC: a Fast-Timing, High-Rate Pixel-Matrix Front-End
Authors:
Lorenzo Piccolo,
Sandro Cadeddu,
Luca Frontini,
Adriano Lai,
Valentino Liberali,
Angelo Rivetti,
Alberto Stabile
Abstract:
This work presents the first measurements performed on the Timespot1 ASIC. As the second prototype developed for the TimeSPOT project, the ASIC features a 32x32 channels hybrid-pixel matrix. Targeted to space-time tracking applications in High Energy Physics experiments, the system aims to achieve a time resolution of 30 ps or better at a maximum event rate of 3 MHz per channel with a Data Driven…
▽ More
This work presents the first measurements performed on the Timespot1 ASIC. As the second prototype developed for the TimeSPOT project, the ASIC features a 32x32 channels hybrid-pixel matrix. Targeted to space-time tracking applications in High Energy Physics experiments, the system aims to achieve a time resolution of 30 ps or better at a maximum event rate of 3 MHz per channel with a Data Driven interface. Power consumption can be programmed to range between $1.2W/cm^{2}$ and $2.6W/cm^{2}$. The presented results include a description of the ASIC operation and a first characterization of its performance in terms of time resolution.
△ Less
Submitted 31 January, 2022;
originally announced January 2022.
-
SuperB Technical Design Report
Authors:
SuperB Collaboration,
M. Baszczyk,
P. Dorosz,
J. Kolodziej,
W. Kucewicz,
M. Sapor,
A. Jeremie,
E. Grauges Pous,
G. E. Bruno,
G. De Robertis,
D. Diacono,
G. Donvito,
P. Fusco,
F. Gargano,
F. Giordano,
F. Loddo,
F. Loparco,
G. P. Maggi,
V. Manzari,
M. N. Mazziotta,
E. Nappi,
A. Palano,
B. Santeramo,
I. Sgura,
L. Silvestris
, et al. (384 additional authors not shown)
Abstract:
In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/ch…
▽ More
In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/charm production threshold with a luminosity of 10^{35} cm^{-2}s^{-1}. This high luminosity, producing a data sample about a factor 100 larger than present B Factories, would allow investigation of new physics effects in rare decays, CP Violation and Lepton Flavour Violation. This document details the detector design presented in the Conceptual Design Report (CDR) in 2007. The R&D and engineering studies performed to arrive at the full detector design are described, and an updated cost estimate is presented.
A combination of a more realistic cost estimates and the unavailability of funds due of the global economic climate led to a formal cancelation of the project on Nov 27, 2012.
△ Less
Submitted 24 June, 2013;
originally announced June 2013.