-
The photochemical ring-opening reaction of 1,3-cyclohexadiene: complex dynamical evolution of the reactive state
Authors:
O. Travnikova,
T. Piteša,
A. Ponzi,
M. Sapunar,
R. J. Squibb,
R. Richter,
P. Finetti,
M. Di Fraia,
A. De Fanis,
N. Mahne,
M. Manfredda,
V. Zhaunerchyk,
T. Marchenko,
R. Guillemin,
L. Journel,
K. C. Prince,
C. Callegari,
M. Simon,
R. Feifel,
P. Decleva,
N. Došlić,
M. N. Piancastelli
Abstract:
The photochemically induced ring-opening isomerization reaction of 1,3-cyclohexadiene (CHD) to 1,3,5-hexatriene (HT) is a textbook example of a pericyclic reaction, and has been amply investigated with advanced spectroscopic techniques. The generally accepted description of the isomerization pathway starts with a valence excitation to the lowest-lying bright state, followed by a passage through a…
▽ More
The photochemically induced ring-opening isomerization reaction of 1,3-cyclohexadiene (CHD) to 1,3,5-hexatriene (HT) is a textbook example of a pericyclic reaction, and has been amply investigated with advanced spectroscopic techniques. The generally accepted description of the isomerization pathway starts with a valence excitation to the lowest-lying bright state, followed by a passage through a conical intersection to a dark doubly excited state, and finally a branching between either the return to the ground state of the cyclic molecule or the actual ring-opening reaction leading to the open-chain isomer. It was traditionally assumed that the dark reactive state corresponds to the second excited state of CHD at the Franck-Condon geometry. Here in a joint experimental and computational effort we demonstrate that the evolution of the excitation-deexcitation process is much more complex than usually described. In particular, we show that an initially high-lying electronic state smoothly decreasing in energy along the reaction path plays a key role in the ring-opening reaction. The conceptual basis of our work is that the dynamics to consider here is determined by diabatic states, whose populations are the ones closely related to the observed photoelectron signal.
△ Less
Submitted 21 February, 2022;
originally announced February 2022.
-
Simultaneous two-color snapshot view on ultrafast charge and spin dynamics in a Fe-Cu-Ni tri-layer
Authors:
Benedikt Rösner,
Boris Vodungbo,
Valentin Chardonnet,
Florian Döring,
Vitaliy A. Guzenko,
Marcel Hennes,
Armin Kleibert,
Maxime Lebugle,
Jan Lüning,
Nicola Mahne,
Aladine Merhe,
Denys Naumenko,
Ivaylo P. Nikolov,
Ignacio Lopez-Quintas,
Emanuele Pedersoli,
Primož R. Ribič,
Tatiana Savchenko,
Benjamin Watts,
Marco Zangrando,
Flavio Capotondi,
Christian David,
Emmanuelle Jal
Abstract:
Ultrafast phenomena on a femtosecond timescale are commonly examined by pump-probe experiments. This implies multiple measurements where the sample under investigation is pumped with a short light pulse and then probed with a second pulse at various time delays to follow its dynamics. Recently, the principle of streaking extreme ultraviolet (XUV) pulses in the temporal domain has enabled recording…
▽ More
Ultrafast phenomena on a femtosecond timescale are commonly examined by pump-probe experiments. This implies multiple measurements where the sample under investigation is pumped with a short light pulse and then probed with a second pulse at various time delays to follow its dynamics. Recently, the principle of streaking extreme ultraviolet (XUV) pulses in the temporal domain has enabled recording the dynamics of a system within a single pulse. However, separate pump-probe experiments at different absorption edges still lack a unified timing, when comparing the dynamics in complex systems. Here we report on an experiment using a dedicated optical element and the two-color emission of the FERMI XUV free-electron laser to follow the charge and spin dynamics in composite materials at two distinct absorption edges, simultaneously. The sample, consisting of ferromagnetic Fe and Ni layers, separated by a Cu layer, is pumped by an infrared laser and probed by a two-color XUV pulse with photon energies tuned to the M edges of these two transition metals. The experimental geometry intrinsically avoids any timing uncertainty between the two elements and unambiguously reveals an approximately 100 fs delay of the magnetic response with respect to the electronic excitation for both Fe and Ni. This delay shows that the electronic and spin degrees of freedom are decoupled during the demagnetization process. These observations underline the importance of simultaneous investigation of the temporal response of both charge and spin in multi-component materials. In a more general scenario, the experimental approach can be extended to continuous energy ranges, promising the development of jitter-free transient absorption spectroscopy in the XUV and soft X-ray regimes.
△ Less
Submitted 31 August, 2020; v1 submitted 21 May, 2020;
originally announced May 2020.
-
Singlet Oxygen Generation as a Major Cause for Parasitic Reactions during Cycling of Aprotic Lithium-Oxygen Batteries
Authors:
Nika Mahne,
Bettina Schafzahl,
Christian Leypold,
Mario Leypold,
Sandra Grumm,
Anita Leitgeb,
Gernot A. Strohmeier,
Martin Wilkening,
Olivier Fontaine,
Denis Kramer,
Christian Slugovc,
Sergey M. Borisov,
Stefan A. Freunberger
Abstract:
Non-aqueous metal-oxygen batteries depend critically on the reversible formation/decomposition of metal oxides on cycling. Irreversible parasitic reactions cause poor rechargeability, efficiency, and cycle life and have predominantly been ascribed to the reactivity of reduced oxygen species with cell components. These species, however, cannot fully explain the side reactions. Here we show that sin…
▽ More
Non-aqueous metal-oxygen batteries depend critically on the reversible formation/decomposition of metal oxides on cycling. Irreversible parasitic reactions cause poor rechargeability, efficiency, and cycle life and have predominantly been ascribed to the reactivity of reduced oxygen species with cell components. These species, however, cannot fully explain the side reactions. Here we show that singlet oxygen forms at the cathode of a lithium-oxygen cell during discharge and from the onset of charge, and accounts for the majority of parasitic reaction products. The amount increases during discharge, early stages of charge, and charging at higher voltages, and is enhanced by the presence of trace water. Superoxide and peroxide appear to be involved in singlet oxygen generation. Singlet oxygen traps and quenchers can reduce parasitic reactions effectively. Awareness of the highly reactive singlet oxygen in non-aqueous metal-oxygen batteries gives a rationale for future research towards achieving highly reversible cell operation.
△ Less
Submitted 28 November, 2017;
originally announced November 2017.
-
In-situ single-shot diffractive fluence mapping for X-ray free-electron laser pulses
Authors:
Michael Schneider,
Christian M. Günther,
Bastian Pfau,
Flavio Capotondi,
Michele Manfredda,
Marco Zangrando,
Nicola Mahne,
Lorenzo Raimondi,
Emanuele Pedersoli,
Stefan Eisebitt
Abstract:
Free-electron lasers (FEL) in the extreme ultraviolet (XUV) and X-ray regime opened up the possibility for experiments at high power densities, in particular allowing for fluence-dependent absorption and scattering experiments to reveal non-linear light-matter interactions at ever shorter wavelengths. Findings of such non-linear effects in the XUV and X-ray regime are met with tremendous interest,…
▽ More
Free-electron lasers (FEL) in the extreme ultraviolet (XUV) and X-ray regime opened up the possibility for experiments at high power densities, in particular allowing for fluence-dependent absorption and scattering experiments to reveal non-linear light-matter interactions at ever shorter wavelengths. Findings of such non-linear effects in the XUV and X-ray regime are met with tremendous interest, but prove difficult to understand and model due to the inherent shot-to-shot fluctuations in photon intensity and the often structured, non-Gaussian spatial intensity profile of a focused FEL beam. Presently, the focused beam spot is characterized and optimized separately from the actual experiment. Here, we present the first simultaneous measurement of diffraction signals from solid samples in tandem with the corresponding single-shot spatial fluence distribution on the actual sample. This new in-situ characterization scheme enables fast and direct monitoring and thus control of the sample illumination which ultimately is necessary for a quantitative understanding of non-linear light-matter interaction in X-ray and XUV FEL experiments.
△ Less
Submitted 10 May, 2017;
originally announced May 2017.
-
Coherent control with a short-wavelength Free Electron Laser
Authors:
K. C. Prince,
E. Allaria,
C. Callegari,
R. Cucini,
G. De Ninno,
S. Di Mitri,
B. Diviacco,
E. Ferrari,
P. Finetti,
D. Gauthier,
L. Giannessi,
N. Mahne,
G. Penco,
O. Plekan,
L. Raimondi,
P. Rebernik,
E. Roussel,
C. Svetina,
M. Trovò,
M. Zangrando,
M. Negro,
P. Carpeggiani,
M. Reduzzi,
G. Sansone,
A. N. Grum-Grzhimailo
, et al. (15 additional authors not shown)
Abstract:
XUV and X-ray Free Electron Lasers (FELs) produce short wavelength pulses with high intensity, ultrashort duration, well-defined polarization and transverse coherence, and have been utilised for many experiments previously possible at long wavelengths only: multiphoton ionization, pumping an atomic laser, and four-wave mixing spectroscopy. However one important optical technique, coherent control,…
▽ More
XUV and X-ray Free Electron Lasers (FELs) produce short wavelength pulses with high intensity, ultrashort duration, well-defined polarization and transverse coherence, and have been utilised for many experiments previously possible at long wavelengths only: multiphoton ionization, pumping an atomic laser, and four-wave mixing spectroscopy. However one important optical technique, coherent control, has not yet been demonstrated, because Self- Amplified Spontaneous Emission FELs have limited longitudinal coherence. Single-colour pulses from the FERMI seeded FEL are longitudinally coherent, and two-colour emission is predicted to be coherent. Here we demonstrate the phase correlation of two colours, and manipulate it to control an experiment. Light of wavelengths 63.0 and 31.5 nm ionized neon, and the asymmetry of the photoelectron angular distribution was controlled by adjusting the phase, with temporal resolution 3 attoseconds. This opens the door to new shortwavelength coherent control experiments with ultrahigh time resolution and chemical sensitivity.
△ Less
Submitted 12 January, 2017;
originally announced January 2017.
-
Two-colour generation in a chirped seeded Free-Electron Laser
Authors:
B. Mahieu,
E. Allaria,
D. Castronovo,
M. B. Danailov,
A. Demidovich,
G. De Ninno,
S. Di Mitri,
W. M. Fawley,
E. Ferrari,
L. Fröhlich,
D. Gauthier,
L. Giannessi,
N. Mahne,
G. Penco,
L. Raimondi,
S. Spampinati,
C. Spezzani,
C. Svetina,
M . Trovò,
M . Zangrando
Abstract:
We present the experimental demonstration of a method for generating two spectrally and temporally separated pulses by an externally seeded, single-pass free-electron laser operating in the extreme-ultraviolet spectral range. Our results, collected on the FERMI@Elettra facility and confirmed by numerical simulations, demonstrate the possibility of controlling both the spectral and temporal feature…
▽ More
We present the experimental demonstration of a method for generating two spectrally and temporally separated pulses by an externally seeded, single-pass free-electron laser operating in the extreme-ultraviolet spectral range. Our results, collected on the FERMI@Elettra facility and confirmed by numerical simulations, demonstrate the possibility of controlling both the spectral and temporal features of the generated pulses. A free-electron laser operated in this mode becomes a suitable light source for jitter-free, two-colour pump-probe experiments.
△ Less
Submitted 6 June, 2013;
originally announced June 2013.
-
Determination of the magnetization profile of Co/Mg periodic multilayers by magneto-optic Kerr effect and X-ray magnetic resonant reflectivity
Authors:
Philippe Jonnard,
K. Le Guen,
Jean-Michel André,
Renaud Delaunay,
N. Mahne,
Angelo Giglia,
S. Nannarone,
A. Verna,
Z. -S. Wang,
J. -T. Zhu,
S. -K. Zhou
Abstract:
The resonant magnetic reflectivity of Co/Mg multilayers around the Co L2,3 absorption edge is simulated then measured on a specifically designed sample. The dichroic signal is obtained when making the difference between the two reflectivities measured with the magnetic field applied in two opposite directions parallel to the sample surface. The simulations show that the existence of magnetic dead…
▽ More
The resonant magnetic reflectivity of Co/Mg multilayers around the Co L2,3 absorption edge is simulated then measured on a specifically designed sample. The dichroic signal is obtained when making the difference between the two reflectivities measured with the magnetic field applied in two opposite directions parallel to the sample surface. The simulations show that the existence of magnetic dead layers at the interfaces between the Co and Mg layers leads to an important increase of the dichroic signal measured in the vicinity of the third Bragg peak that otherwise should be negligible. The measurements are in agreement with the model introducing 0.25 nm thick dead layers. This is attributed to the Co atoms in contact with the Mg layers and thus we conclude that the Co-Mg interfaces are abrupt from the magnetic point of view.
△ Less
Submitted 18 March, 2013;
originally announced March 2013.
-
Analysis of periodic Mo/Si multilayers: influence of the Mo thickness
Authors:
H. Maury,
Jean-Michel André,
Karine Le Guen,
N. Mahne,
Angela Giglia,
S. Nannarone,
Françoise Bridou,
Franck Delmotte,
Philippe Jonnard
Abstract:
A set of Mo/Si periodic multilayers is studied by non destructive analysis methods. The thickness of the Si layers is 5 nm while the thickness of the Mo layers changes from one multilayer to another, from 2 to 4 nm. This enables us to probe the effect of the transition between the amorphous to crystalline state of the Mo layers near the interfaces with Si on the optical performances of the multila…
▽ More
A set of Mo/Si periodic multilayers is studied by non destructive analysis methods. The thickness of the Si layers is 5 nm while the thickness of the Mo layers changes from one multilayer to another, from 2 to 4 nm. This enables us to probe the effect of the transition between the amorphous to crystalline state of the Mo layers near the interfaces with Si on the optical performances of the multilayers. This transition results in the variation of the refractive index (density variation) of the Mo layers, as observed by x-ray reflectivity (XRR) at a wavelength of 0.154 nm. Combining x-ray emission spectroscopy and XRR, the parameters (composition, thickness and roughness) of the interfacial layers formed by the interaction between the Mo and Si layers are determined. However, these parameters do not evolve significantly as a function of the Mo thickness. It is observed by diffuse scattering at 1.33 nm that the lateral correlation length of the roughness strongly decreases when the Mo thickness goes from 2 to 3 nm. This is due to the development of Mo crystallites parallel to the multilayer surface.
△ Less
Submitted 6 December, 2012;
originally announced December 2012.
-
Investigation of the thermal stability of Mg/Co periodic multilayers for EUV applications
Authors:
M. -H. Hu,
K. Le Guen,
Jean-Michel André,
S. -K. Zhou,
H. -C. Li,
J. -T. Zhu,
Z. -S. Wang,
C. Meny,
N. Mahne,
Angela Giglia,
S. Nannarone,
I. Esteve,
M. Walls,
Philippe Jonnard
Abstract:
We present the results of the characterization of Mg/Co periodic multilayers and their thermal stability for the EUV range. The annealing study is performed up to a temperature of 400\degree C. Images obtained by scanning transmission electron microscopy and electron energy loss spectroscopy clearly show the good quality of the multilayer structure. The measurements of the EUV reflectivity around…
▽ More
We present the results of the characterization of Mg/Co periodic multilayers and their thermal stability for the EUV range. The annealing study is performed up to a temperature of 400\degree C. Images obtained by scanning transmission electron microscopy and electron energy loss spectroscopy clearly show the good quality of the multilayer structure. The measurements of the EUV reflectivity around 25 nm (~49 eV) indicate that the reflectivity decreases when the annealing temperature increases above 300\degreeC. X-ray emission spectroscopy is performed to determine the chemical state of the Mg atoms within the Mg/Co multilayer. Nuclear magnetic resonance used to determine the chemical state of the Co atoms and scanning electron microscopy images of cross sections of the Mg/Co multilayers reveal changes in the morphology of the stack from an annealing temperature of 305\degreee;C. This explains the observed reflectivity loss.
△ Less
Submitted 9 February, 2012; v1 submitted 6 December, 2011;
originally announced December 2011.
-
On the Kramers-Kronig transform with logarithmic kernel for the reflection phase in the Drude model
Authors:
J. -M. André,
K. Le Guen,
Philippe Jonnard,
N. Mahne,
Angela Giglia,
S. Nannarone
Abstract:
We use the Kramers-Kronig transform (KKT) with logarithmic kernel to obtain the reflection phase and, subsequently, the complex refractive index of a bulk mirror from reflectance. However, there remains some confusion regarding the formulation for this analysis. Assuming the damped Drude model for the dielectric constant and the oblique incidence case, we calculate the additional terms: phase at z…
▽ More
We use the Kramers-Kronig transform (KKT) with logarithmic kernel to obtain the reflection phase and, subsequently, the complex refractive index of a bulk mirror from reflectance. However, there remains some confusion regarding the formulation for this analysis. Assuming the damped Drude model for the dielectric constant and the oblique incidence case, we calculate the additional terms: phase at zero frequency and Blashke factor and we propose a reformulated KKT within this model. Absolute reflectance in the s-polarization case of a gold film is measured between 40 and 350 eV for various glancing angles using synchrotron radiation and its complex refractive index is deduced using the reformulated KKT that we propose. The results are discussed with respect to the data available in the literature.
△ Less
Submitted 22 November, 2011;
originally announced November 2011.
-
Introduction of Zr in nanometric periodic Mg/Co multilayers
Authors:
K. Le Guen,
M. -H. Hu,
J. -M. André,
Philippe Jonnard,
S. -K. Zhou,
H. -C. Li,
J. -T. Zhu,
Z. -S. Wang,
N. Mahne,
Angela Giglia,
S. Nannarone
Abstract:
We study the introduction of a third material, namely Zr, within a nanometric periodic Mg/Co structure designed to work as optical component in the extreme UV (EUV) spectral range. Mg/Co, Mg/Zr/Co, Mg/Co/Zr and Mg/Zr/Co/Zr multilayers are designed, then characterized in terms of structural quality and optical performances through X-ray and EUV reflectometry measurements respectively. For the Mg/Co…
▽ More
We study the introduction of a third material, namely Zr, within a nanometric periodic Mg/Co structure designed to work as optical component in the extreme UV (EUV) spectral range. Mg/Co, Mg/Zr/Co, Mg/Co/Zr and Mg/Zr/Co/Zr multilayers are designed, then characterized in terms of structural quality and optical performances through X-ray and EUV reflectometry measurements respectively. For the Mg/Co/Zr structure, the reflectance value is equal to 50% at 25.1 nm and 45deg of grazing incidence and reaches 51.3% upon annealing at 200deg C. Measured EUV reflectivity values of tri-layered systems are discussed in terms of material order within a period and compared to the predictions of the theoretical model of Larruquert. Possible applications are pointed out.
△ Less
Submitted 19 November, 2011;
originally announced November 2011.
-
Measuring magnetic profiles at manganite surfaces with monolayer resolution
Authors:
A. Verna,
B. A. Davidson,
Y. Szeto,
A. Yu. Petrov,
A. Mirone,
A. Giglia,
N. Mahne,
S. Nannarone
Abstract:
The performance of manganite-based magnetic tunnel junctions (MTJs) has suffered from reduced magnetization present at the junction interfaces that is ultimately responsible for the spin polarization of injected currents; this behavior has been attributed to a magnetic "dead layer" that typically extends a few unit cells into the manganite. X-ray magnetic scattering in resonant conditions (XRMS)…
▽ More
The performance of manganite-based magnetic tunnel junctions (MTJs) has suffered from reduced magnetization present at the junction interfaces that is ultimately responsible for the spin polarization of injected currents; this behavior has been attributed to a magnetic "dead layer" that typically extends a few unit cells into the manganite. X-ray magnetic scattering in resonant conditions (XRMS) is one of the most innovative and effective techniques to extract surface or interfacial magnetization profiles with subnanometer resolution, and has only recently been applied to oxide heterostructures. Here we present our approach to characterizing the surface and interfacial magnetization of such heterostructures using the XRMS technique, conducted at the BEAR beamline (Elettra synchrotron, Trieste). Measurements were carried out in specular reflectivity geometry, switching the left/right elliptical polarization of light as well the magnetization direction in the scattering plane. Spectra were collected across the Mn L2,3 edge for at least four different grazing angles in order to better analyse the interference phenomena. The resulting reflectivity spectra have been carefully fit to obtain the magnetization profiles, minimizing the number of free parameters as much as possible. Optical constants of the samples (real and imaginary part of the refractive index) in the interested frequency range are obtained through absorption measurements in two magnetization states and subsequent Kramers-Kronig transformation, allowing quantitative fits of the magnetization profile at different temperatures. We apply this method to the study of air-exposed surfaces of epitaxial La2/3Sr1/3MnO3 (001) films grown on SrTiO3 (001) substrates.
△ Less
Submitted 19 May, 2009;
originally announced May 2009.
-
A Nexafs Study of Nitric Oxide Layers Adsorbed from a nitrite Solution onto a Pt(111) Surface
Authors:
M. Pedio,
E. Casero,
S. Nannarone,
A. Giglia,
N. Mahne,
K. Hayakawa,
M. Benfatto,
K. Hatada,
R. Felici,
J. I. Cerda',
C. Alonso,
J. A. Martin-Gago
Abstract:
NO molecules adsorbed on a Pt(111) surface from dipping in an acidic nitrite solution are studied by near edge X-ray absorption fine structure spectroscopy (NEXAFS), X-ray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED) and scanning tunnelling microscopy (STM) techniques. LEED patterns and STM images show that no long range ordered structures are formed after NO adsorpti…
▽ More
NO molecules adsorbed on a Pt(111) surface from dipping in an acidic nitrite solution are studied by near edge X-ray absorption fine structure spectroscopy (NEXAFS), X-ray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED) and scanning tunnelling microscopy (STM) techniques. LEED patterns and STM images show that no long range ordered structures are formed after NO adsorption on a Pt(111) surface. Although the total NO coverage is very low, spectroscopic features in N K-edge and O K-edge absorption spectra have been singled out and related to the different species induced by this preparation method. From these measurements it is concluded that the NO molecule is adsorbed trough the N atom in an upright conformation. The maximum saturation coverage is about 0.3 monolayers, and although nitric oxide is the major component, nitrite and nitrogen species are slightly co-adsorbed on the surface. The results obtained from this study are compared with those previously reported in the literature for NO adsorbed on Pt(111) under UHV conditions.
△ Less
Submitted 12 March, 2008;
originally announced March 2008.
-
Confinement Induced Polarization effects in Valence and Inner-shell Spectra of Atactic Polystyrene
Authors:
Sudeshna Chattopadhyay,
A. Datta,
A. Giglia,
N. Mahne,
S. Nannarone
Abstract:
Vacuum ultraviolet (VUV) transmission spectra show a clear polarization effect in pi electronic transition in spin coated atactic polystyrene (aPS) films of thickness below 4Rg, where Rg (~20.4nm) is the radius of gyration of the polymer. This transition associated with pendant benzene rings in polystyrene. The polarization effect clearly indicates pendant benzene ring alignment on a macroscopic…
▽ More
Vacuum ultraviolet (VUV) transmission spectra show a clear polarization effect in pi electronic transition in spin coated atactic polystyrene (aPS) films of thickness below 4Rg, where Rg (~20.4nm) is the radius of gyration of the polymer. This transition associated with pendant benzene rings in polystyrene. The polarization effect clearly indicates pendant benzene ring alignment on a macroscopic scale. Study of core electron (1s) transition through near edge x-ray absorption fine structure (NEXAFS) spectroscopy confirms the ordering and shows that the rings are oriented towards out-of-plane direction with a tilt angle ~63 degree with the sample plane, which is consistent with the observed in-plane (sample surface) VUV polarization. These results indicate the transition of a common polymer, like polystyrene, inherently disordered in the bulk, to an orientationally ordered phase under a certain degree of confinement.
△ Less
Submitted 18 September, 2007; v1 submitted 17 September, 2007;
originally announced September 2007.
-
Nanoconfined Polystyrene: A New Phase
Authors:
Sudeshna Chattopadhyay,
Alokmay Datta,
Avijit Das,
Angelo Giglia,
Stefano Nannarone,
Nicola Mahne
Abstract:
Transverse layering of molecular gyration spheres in spin-coated atactic polystyrene ($aPS$) films, for film thickness $R \leq$ 4$R_g$ ($R_g$ = unperturbed gyration radius), causes an increase in free energy that does not follow the $(R_g/R)^{-2}$ dependence of planar confinement and is explained by invoking a fixed-range, repulsive, modified Pöschl-Teller intermolecular potential, its strength…
▽ More
Transverse layering of molecular gyration spheres in spin-coated atactic polystyrene ($aPS$) films, for film thickness $R \leq$ 4$R_g$ ($R_g$ = unperturbed gyration radius), causes an increase in free energy that does not follow the $(R_g/R)^{-2}$ dependence of planar confinement and is explained by invoking a fixed-range, repulsive, modified Pöschl-Teller intermolecular potential, its strength decreasing with increase in $R$. Vacuum ultraviolet spectroscopy reveals a change in 'physical dimers' of adjacent pendant benzene rings of $aPS$ from 'oblique' to 'head-to-tail' configuration as film thickness goes from 9$R_{g}$ to 2$R_{g}$. This reduces cohesion by reducing dimer dipole moment. Thus a new phase of $aPS$, the nanoconfined phase, ordered but with lower cohesion than bulk, is formed.
△ Less
Submitted 5 October, 2006;
originally announced October 2006.
