-
Radiation Hardness and Defects Activity in PEA2PbBr4 Single Crystals
Authors:
Andrea Ciavatti,
Vito Foderà,
Giovanni Armaroli,
Lorenzo Maserati,
Beatrice Fraboni,
Daniela Cavalcoli
Abstract:
Metal halide perovskites (MHPs) are low-temperature processable hybrid semiconductor materials with exceptional performances that are revolutionizing the field of optoelectronic devices. Despite their great potential, commercial deployment is hindered by MHPs lack of stability and durability, mainly attributed to ions migration and chemical interactions with the device electrodes. To address these…
▽ More
Metal halide perovskites (MHPs) are low-temperature processable hybrid semiconductor materials with exceptional performances that are revolutionizing the field of optoelectronic devices. Despite their great potential, commercial deployment is hindered by MHPs lack of stability and durability, mainly attributed to ions migration and chemical interactions with the device electrodes. To address these issues, 2D layered MHPs have been investigated as possible device interlayers or active material substitutes to reduce ion migration and improve stability. Here we consider the 2D perovskite PEA2PbBr4 that was recently discussed as very promising candidate for X-ray direct detection. While the increased resilience of PEA2PbBr4 detectors have already been reported, the physical mechanisms responsible for such improvement compared to the standard "3D" perovskites are not still fully understood. To unravel the charge transport process in PEA2PbBr4 crystals thought to underly the device better performance, we adapted an investigation technique previously used on highly resistive inorganic semiconductors, called photo induced current transient spectroscopy (PICTS). We demonstrate that PICTS can detect three distinct trap states (T1, T2, and T3) with different activation energies, and that the trap states evolution upon X-ray exposure can explain PEA2PbBr4 superior radiation tolerance and reduced aging effects. Overall, our results provide essential insights into the stability and electrical characteristics of 2D perovskites and their potential application as reliable and direct X-ray detectors.
△ Less
Submitted 23 September, 2023;
originally announced September 2023.
-
Stable and Solution-Processable Cumulenic sp-Carbon Wires: A New Paradigm for Organic Electronics
Authors:
Stefano Pecorario,
Alberto D. Scaccabarozzi,
Daniele Fazzi,
Edgar Gutiérrez-Fernández,
Vito Vurro,
Lorenzo Maserati,
Mengting Jiang,
Tommaso Losi,
Bozheng Sun,
Rik R. Tykwinski,
Carlo S. Casari,
Mario Caironi
Abstract:
Solution-processed, large-area, and flexible electronics largely relies on the excellent electronic properties of sp$^2$-hybridized carbon molecules, either in the form of $π$-conjugated small molecules and polymers or graphene and carbon nanotubes. Carbon with sp-hybridization, the foundation of the elusive allotrope carbyne, offers vast opportunities for functionalized molecules in the form of l…
▽ More
Solution-processed, large-area, and flexible electronics largely relies on the excellent electronic properties of sp$^2$-hybridized carbon molecules, either in the form of $π$-conjugated small molecules and polymers or graphene and carbon nanotubes. Carbon with sp-hybridization, the foundation of the elusive allotrope carbyne, offers vast opportunities for functionalized molecules in the form of linear carbon atomic wires (CAWs), with intriguing and even superior predicted electronic properties. While CAWs represent a vibrant field of research, to date, they have only been applied sparingly to molecular devices. The recent observation of the field-effect in microcrystalline cumulenes suggests their potential applications in solution-processed thin-film transistors but concerns surrounding the stability and electronic performance have precluded developments in this direction. In the present study, ideal field-effect characteristics are demonstrated for solution-processed thin films of tetraphenyl[3]cumulene, the shortest semiconducting CAW. Films are deposited through a scalable, large-area, meniscus-coating technique, providing transistors with hole mobilities in excess of 0.1 cm$^2$ V$^{-1}$ s$^{-1}$, as well as promising operational stability under dark conditions. These results offer a solid foundation for the exploitation of a vast class of molecular semiconductors for organic electronics based on sp-hybridized carbon systems and create a previously unexplored paradigm.
△ Less
Submitted 7 March, 2022;
originally announced March 2022.
-
Exciton self-trapping causes picoseconds recombination in metal-organic chalcogenides hybrid quantum wells
Authors:
Christoph Kastl,
Adam M. Schwartzberg,
Lorenzo Maserati
Abstract:
Metal-organic species can be designed to self-assemble in large-scale, atomically defined, supramolecular architectures. Hybrid quantum wells, where inorganic two-dimensional (2D) planes are separated by organic ligands, are a particular example. The ligands effectively provide an intralayer confinement for charge carriers resulting in a 2D electronic structure, even in multilayered assemblies. Ai…
▽ More
Metal-organic species can be designed to self-assemble in large-scale, atomically defined, supramolecular architectures. Hybrid quantum wells, where inorganic two-dimensional (2D) planes are separated by organic ligands, are a particular example. The ligands effectively provide an intralayer confinement for charge carriers resulting in a 2D electronic structure, even in multilayered assemblies. Air-stable metal organic chalcogenides hybrid quantum wells have recently been found to host tightly bound 2D excitons with strong optical anisotropy in a bulk matrix. Here, we investigate the excited carrier dynamics in the prototypical metal organic chalcogenide [AgSePh], disentangling three excitonic resonances by low temperature transient absorption spectroscopy. Our analysis suggests a complex relaxation cascade comprising ultrafast screening and renormalization, inter-exciton relaxation, and self-trapping of excitons within few picoseconds. The ps-decay provided by the self-trapping mechanism may be leveraged to unlock the material's potential for ultrafast optoelectronic applications.
△ Less
Submitted 10 March, 2021;
originally announced March 2021.
-
Photo-electrical properties of 2D Quantum Confined Metal Organic Chalcogenides Nanocrystal Films
Authors:
Lorenzo Maserati,
Mirko Prato,
Stefano Pecorario,
Bianca Passarella,
Andrea Perinot,
Anupa Anna Thomas,
Filippo Melloni,
Dario Natali,
Mario Caironi
Abstract:
2D quantum confined hybrid materials are of great interest from a solid state physics standpoint because of the rich multibody phenomena hosted, their tunability and easy synthesis allowing to create material libraries. In addition, from a technological standpoint, 2D hybrids are promising candidates for efficient, tunable, low cost materials impacting a broad range of optoelectronic devices. Diff…
▽ More
2D quantum confined hybrid materials are of great interest from a solid state physics standpoint because of the rich multibody phenomena hosted, their tunability and easy synthesis allowing to create material libraries. In addition, from a technological standpoint, 2D hybrids are promising candidates for efficient, tunable, low cost materials impacting a broad range of optoelectronic devices. Different approaches and materials have therefore been investigated, with the notable example of 2D metal halide hybrid perovskites. Despite the remarkable properties of such materials, the presence of toxic elements like lead are not desirable in applications and their ionic lattices may represent a limiting factor for stability under operating conditions. Alternative, non-ionic 2D materials made of non-toxic elements are therefore desirable. In order to expand the library of possible hybrid quantum wells materials, here we consider an alternative platform based on non-toxic, self-assembled, metal-organic chalcogenides. While the optical properties have been recently explored and some unique excitonic characters highlighted, photo-generation of carriers and their transport in these lamellar inorganic/organic nanostructures, critical optoelectronic aspects, remain totally unexplored. We hereby report the first electrical investigation of the air-stable [AgSePh] 2D coordination polymer in form of nanocrystal (NC) films readily synthesized in situ and at low temperature, compatible with flexible plastic substrates. The wavelength-dependent photo-response of the NC films suggests possible use of this materials as near-UV photodetector. We therefore built a lateral photo-detector, achieving a sensitivity of 0.8 A/W at 370 nm thanks to a photoconduction mechanism, and a cutoff frequency of ~400 Hz, and validated its reliability as air-stable UV detector on flexible substrates.
△ Less
Submitted 30 July, 2020;
originally announced July 2020.
-
Understanding the Synthetic Pathway to Large Area, High Quality [AgSePh] Nanocrystal Films
Authors:
Lorenzo Maserati,
Stefano Pecorario,
Mirko Prato,
Mario Caironi
Abstract:
Silver benzeneselenolate [AgSePh] is a coordination polymer that hosts a hybrid quantum well structure. The recent advancements in the study of its tightly bound excitons (~300 meV) and photoconductive properties (recently employed in UV photodetection) makes it an interesting representative of a material platform that is an environmentally stable alternative to 2D metal halide perovskites in term…
▽ More
Silver benzeneselenolate [AgSePh] is a coordination polymer that hosts a hybrid quantum well structure. The recent advancements in the study of its tightly bound excitons (~300 meV) and photoconductive properties (recently employed in UV photodetection) makes it an interesting representative of a material platform that is an environmentally stable alternative to 2D metal halide perovskites in terms of optoelectronic properties. To this aim, several challenges are to be addressed, among which the lack of control over the metal-organic reaction process in the reported synthesis of the [AgSePh] nanocrystal film (NC). This issue contributed to cast doubts over the origin of its intra-bandgap electronic states. In this article we study all the steps to obtain phase pure [AgSePh] NC films, from thin silver films through its oxidation and reaction via a chemical vapor-solid with benzeneselenol, by means of UV-vis, XRD, SEM, and AFM. Raman and FTIR spectroscopy are also employed to provide vibrational peaks assignment, for the first time on this polymer. Our analysis supports an acid-base reaction scheme based on an acid attacking the metal oxide precursor, generating water as byproduct of the polymeric synthesis, speeding up the reaction by solvating the PhSeH. The reaction readily goes to completion within 30 min in a supersaturated PhSeH / N2 atmosphere at 90 °C. Our analysis suggests the absence of precursor's leftovers or oxidized species that could contribute to the intra-gap states. By tuning the reaction parameters, we gained control on film morphology to obtain substrate-parallel oriented micro-crystals showing different excitonic absorption intensities. Finally, centimeters size high quality [AgSePh] NC films could be obtained, enabling exploitation of their optoelectronic properties, such as UV photodetection, in large-area applications.
△ Less
Submitted 24 September, 2020; v1 submitted 30 July, 2020;
originally announced July 2020.
-
Gate-Controlled Ionization and Screening of Cobalt Adatoms on a Graphene Surface
Authors:
Victor W. Brar,
Regis Decker,
Hans-Michael Solowan,
Yang Wang,
Lorenzo Maserati,
Kevin T. Chan,
Hoonkyung Lee,
Caglar O. Girit,
Alex Zettl,
Steven G. Louie,
Marvin L. Cohen,
Michael F. Crommie
Abstract:
We describe scanning tunneling spectroscopy (STS) measurements performed on individual cobalt (Co) atoms deposited onto backgated graphene devices. We find that Co adatoms on graphene can be ionized by either the application of a global backgate voltage or by the application of a local electric field from a scanning tunneling microscope (STM) tip. Large screening clouds are observed to form around…
▽ More
We describe scanning tunneling spectroscopy (STS) measurements performed on individual cobalt (Co) atoms deposited onto backgated graphene devices. We find that Co adatoms on graphene can be ionized by either the application of a global backgate voltage or by the application of a local electric field from a scanning tunneling microscope (STM) tip. Large screening clouds are observed to form around Co adatoms ionized in this way, and we observe that some intrinsic graphene defects display a similar behavior. Our results provide new insight into charged impurity scattering in graphene, as well as the possibility of using graphene devices as chemical sensors.
△ Less
Submitted 4 June, 2010;
originally announced June 2010.
