-
Expert exploranation for communicating scientific methods -- A case study in conflict research
Authors:
Benedikt Mayer,
Karsten Donnay,
Kai Lawonn,
Bernhard Preim,
Monique Meuschke
Abstract:
Science communication aims at making key research insights accessible to the broad public. If explanatory and exploratory visualization techniques are combined to do so, the approach is also referred to as exploranation. In this context, the audience is usually not required to have domain expertise. However, we show that exploranation can not only support the communication between researchers and…
▽ More
Science communication aims at making key research insights accessible to the broad public. If explanatory and exploratory visualization techniques are combined to do so, the approach is also referred to as exploranation. In this context, the audience is usually not required to have domain expertise. However, we show that exploranation can not only support the communication between researchers and a broad audience, but also between researchers directly. With the goal of communicating an existing method for conducting causal inference on spatio-temporal conflict event data, we investigated how to perform exploranation for experts, i.e., expert exploranation. Based on application scenarios of the inference method, we developed three versions of an interactive visual story to explain the method to conflict researchers. We abstracted the corresponding design process and evaluated the stories both with experts who were unfamiliar with the explained method and experts who were already familiar with it. The positive and extensive feedback from the evaluation shows that expert exploranation is a promising direction for visual storytelling, as it can help to improve scientific outreach, methodological understanding, and accessibility for researchers new to a field.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Defect-engineering hexagonal boron nitride using low-energy Ar+ irradiation
Authors:
Manuel Längle,
Barbara Maria Mayer,
Jacob Madsen,
Diana Propst,
Arixin Bo,
Clara Kofler,
Vinzent Hana,
Clemens Mangler,
Toma Susi,
Jani Kotakoski
Abstract:
Monolayer hexagonal boron nitride (hBN) has recently become the focus of intense research as a material to host quantum emitters. Although it is well known that such emission is associated with point defects, so far no conclusive correlation between the spectra and specific defects has been demonstrated. Here, we prepare atomically clean suspended hBN samples and subject them to low-energy ion irr…
▽ More
Monolayer hexagonal boron nitride (hBN) has recently become the focus of intense research as a material to host quantum emitters. Although it is well known that such emission is associated with point defects, so far no conclusive correlation between the spectra and specific defects has been demonstrated. Here, we prepare atomically clean suspended hBN samples and subject them to low-energy ion irradiation. The samples are characterized before and after irradiation via automated scanning transmission electron microscopy imaging to assess the defect concentrations and distributions. We find an intrinsic defect concentration of ca. 0.03/nm2 (with ca. 55% boron and 8% nitrogen single vacancies, 20% double vacancies and 16% more complex vacancy structures). To be able to differentiate between these and irradiation-induced defects, we create a significantly higher (but still moderate) concentration of defects with the ions (0.30/nm2), and now find ca. 55% boron and 12% nitrogen single vacancies, 14% double vacancies, and 18% more complex vacancy structures. The results demonstrate that already the simplest irradiation provides selectivity for the defect types, and open the way for future experiments to explore changing the selectivity by modifying the irradiation parameters.
△ Less
Submitted 10 April, 2024;
originally announced April 2024.
-
HUGE: Huge Unsupervised Graph Embeddings with TPUs
Authors:
Brandon Mayer,
Anton Tsitsulin,
Hendrik Fichtenberger,
Jonathan Halcrow,
Bryan Perozzi
Abstract:
Graphs are a representation of structured data that captures the relationships between sets of objects. With the ubiquity of available network data, there is increasing industrial and academic need to quickly analyze graphs with billions of nodes and trillions of edges. A common first step for network understanding is Graph Embedding, the process of creating a continuous representation of nodes in…
▽ More
Graphs are a representation of structured data that captures the relationships between sets of objects. With the ubiquity of available network data, there is increasing industrial and academic need to quickly analyze graphs with billions of nodes and trillions of edges. A common first step for network understanding is Graph Embedding, the process of creating a continuous representation of nodes in a graph. A continuous representation is often more amenable, especially at scale, for solving downstream machine learning tasks such as classification, link prediction, and clustering. A high-performance graph embedding architecture leveraging Tensor Processing Units (TPUs) with configurable amounts of high-bandwidth memory is presented that simplifies the graph embedding problem and can scale to graphs with billions of nodes and trillions of edges. We verify the embedding space quality on real and synthetic large-scale datasets.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
-
Surgical Phase and Instrument Recognition: How to identify appropriate Dataset Splits
Authors:
Georgii Kostiuchik,
Lalith Sharan,
Benedikt Mayer,
Ivo Wolf,
Bernhard Preim,
Sandy Engelhardt
Abstract:
Purpose: Machine learning models can only be reliably evaluated if training, validation, and test data splits are representative and not affected by the absence of classes of interest. Surgical workflow and instrument recognition tasks are complicated in this manner, because of heavy data imbalances resulting from different lengths of phases and their erratic occurrences. Furthermore, the issue be…
▽ More
Purpose: Machine learning models can only be reliably evaluated if training, validation, and test data splits are representative and not affected by the absence of classes of interest. Surgical workflow and instrument recognition tasks are complicated in this manner, because of heavy data imbalances resulting from different lengths of phases and their erratic occurrences. Furthermore, the issue becomes difficult as sub-properties that help define phases, like instrument (co-)occurrence, are usually not considered when defining the split. We argue that such sub-properties must be equally considered.
Methods: This work presents a publicly available data visualization tool that enables interactive exploration of dataset splits for surgical phase and instrument recognition. It focuses on the visualization of the occurrence of phases, phase transitions, instruments, and instrument combinations across sets. Particularly, it facilitates the assessment and identification of sub-optimal dataset splits.
Results: We performed an analysis of common Cholec80 dataset splits using the proposed application and were able to uncover phase transitions and combinations of instruments that were not represented in one of the sets. Additionally, we outlined possible improvements to the splits. A user study with ten participants demonstrated the ability of participants to solve a selection of data exploration tasks using the proposed application.
Conclusion: In highly unbalanced class distributions, special care should be taken with respect to the selection of an appropriate dataset split. Our interactive data visualization tool presents a promising approach for the assessment of dataset splits for surgical phase and instrument recognition. Evaluation results show that it can enhance the development of machine learning models. The application is available at https://cardio-ai.github.io/endovis-ml/ .
△ Less
Submitted 31 October, 2023; v1 submitted 29 June, 2023;
originally announced June 2023.
-
Thermophoretic motion of a charged single colloidal particle
Authors:
Daniel B. Mayer,
Dieter Braun,
Thomas Franosch
Abstract:
We calculate the thermophoretic drift of a charged single colloidal particle with hydrodynamically slipping surface immersed in an electrolyte solution in response to a small temperature gradient. Here, we rely on a linearized hydrodynamic approach for the fluid flow and the motion of the electrolyte ions while keeping the full nonlinearity of the Poisson-Boltzmann equation of the unperturbed syst…
▽ More
We calculate the thermophoretic drift of a charged single colloidal particle with hydrodynamically slipping surface immersed in an electrolyte solution in response to a small temperature gradient. Here, we rely on a linearized hydrodynamic approach for the fluid flow and the motion of the electrolyte ions while keeping the full nonlinearity of the Poisson-Boltzmann equation of the unperturbed system to account for possible large surface charging. The partial differential equations are transformed into a coupled set of ordinary differential equations in linear response. Numerical solutions are elaborated for parameter regimes of small and large Debye shielding and different hydrodynamic boundary conditions encoded in a varying slip length. Our results are in good agreement with predictions from recent theoretical work and successfully describe experimental observations on thermophoresis of DNA. We also compare our numerical results with experimental data on polystyrene beads.
△ Less
Submitted 25 April, 2023;
originally announced April 2023.
-
TF-GNN: Graph Neural Networks in TensorFlow
Authors:
Oleksandr Ferludin,
Arno Eigenwillig,
Martin Blais,
Dustin Zelle,
Jan Pfeifer,
Alvaro Sanchez-Gonzalez,
Wai Lok Sibon Li,
Sami Abu-El-Haija,
Peter Battaglia,
Neslihan Bulut,
Jonathan Halcrow,
Filipe Miguel Gonçalves de Almeida,
Pedro Gonnet,
Liangze Jiang,
Parth Kothari,
Silvio Lattanzi,
André Linhares,
Brandon Mayer,
Vahab Mirrokni,
John Palowitch,
Mihir Paradkar,
Jennifer She,
Anton Tsitsulin,
Kevin Villela,
Lisa Wang
, et al. (2 additional authors not shown)
Abstract:
TensorFlow-GNN (TF-GNN) is a scalable library for Graph Neural Networks in TensorFlow. It is designed from the bottom up to support the kinds of rich heterogeneous graph data that occurs in today's information ecosystems. In addition to enabling machine learning researchers and advanced developers, TF-GNN offers low-code solutions to empower the broader developer community in graph learning. Many…
▽ More
TensorFlow-GNN (TF-GNN) is a scalable library for Graph Neural Networks in TensorFlow. It is designed from the bottom up to support the kinds of rich heterogeneous graph data that occurs in today's information ecosystems. In addition to enabling machine learning researchers and advanced developers, TF-GNN offers low-code solutions to empower the broader developer community in graph learning. Many production models at Google use TF-GNN, and it has been recently released as an open source project. In this paper we describe the TF-GNN data model, its Keras message passing API, and relevant capabilities such as graph sampling and distributed training.
△ Less
Submitted 23 July, 2023; v1 submitted 7 July, 2022;
originally announced July 2022.
-
Intrinsic emergence of Majorana modes in Luttinger j=3/2 systems
Authors:
Julian Benedikt Mayer,
Miguel A. Sierra,
Ewelina M. Hankiewicz
Abstract:
We analyze theoretically two different setups for s-wave superconductivity (SC) proximitized $j=3/2$ particles in Luttinger materials that are able to host Majorana bound states (MBSs). First, we consider a one-dimensional SC wire with intrinsic bulk inversion asymmetry (BIA). In contrast to wires, modeled by a quadratic dispersion with Rashba spin-orbit coupling, there are two topological phase t…
▽ More
We analyze theoretically two different setups for s-wave superconductivity (SC) proximitized $j=3/2$ particles in Luttinger materials that are able to host Majorana bound states (MBSs). First, we consider a one-dimensional SC wire with intrinsic bulk inversion asymmetry (BIA). In contrast to wires, modeled by a quadratic dispersion with Rashba spin-orbit coupling, there are two topological phase transitions in our systems at finite magnetic fields. Second, we analyze a two-dimensional Josephson junction on the Luttinger model finding a topological region even in the absence of BIA and Rashba spin-orbit couplings. This originates from the hybridization of the light and heavy hole bands of the $j=3/2$ states in combination with the SC pairing. As a consequence, both systems can be driven into a topological phase hosting MBSs. Hence, we predict that MBSs form in any SC proximitized Josephson junction on 2D Luttinger materials by the application of magnetic field alone. This opens a new avenue for the search of topological SC.
△ Less
Submitted 29 March, 2022; v1 submitted 25 March, 2022;
originally announced March 2022.
-
GraphWorld: Fake Graphs Bring Real Insights for GNNs
Authors:
John Palowitch,
Anton Tsitsulin,
Brandon Mayer,
Bryan Perozzi
Abstract:
Despite advances in the field of Graph Neural Networks (GNNs), only a small number (~5) of datasets are currently used to evaluate new models. This continued reliance on a handful of datasets provides minimal insight into the performance differences between models, and is especially challenging for industrial practitioners who are likely to have datasets which look very different from those used a…
▽ More
Despite advances in the field of Graph Neural Networks (GNNs), only a small number (~5) of datasets are currently used to evaluate new models. This continued reliance on a handful of datasets provides minimal insight into the performance differences between models, and is especially challenging for industrial practitioners who are likely to have datasets which look very different from those used as academic benchmarks. In the course of our work on GNN infrastructure and open-source software at Google, we have sought to develop improved benchmarks that are robust, tunable, scalable,and generalizable. In this work we introduce GraphWorld, a novel methodology and system for benchmarking GNN models on an arbitrarily-large population of synthetic graphs for any conceivable GNN task. GraphWorld allows a user to efficiently generate a world with millions of statistically diverse datasets. It is accessible, scalable, and easy to use. GraphWorld can be run on a single machine without specialized hardware, or it can be easily scaled up to run on arbitrary clusters or cloud frameworks. Using GraphWorld, a user has fine-grained control over graph generator parameters, and can benchmark arbitrary GNN models with built-in hyperparameter tuning. We present insights from GraphWorld experiments regarding the performance characteristics of tens of thousands of GNN models over millions of benchmark datasets. We further show that GraphWorld efficiently explores regions of benchmark dataset space uncovered by standard benchmarks, revealing comparisons between models that have not been historically obtainable. Using GraphWorld, we also are able to study in-detail the relationship between graph properties and task performance metrics, which is nearly impossible with the classic collection of real-world benchmarks.
△ Less
Submitted 7 July, 2022; v1 submitted 28 February, 2022;
originally announced March 2022.
-
Two-dimensional Brownian motion of anisotropic dimers
Authors:
Daniel B. Mayer,
Erick Sarmiento-Gómez,
Manuel A. Escobedo-Sánchez,
Juan Pablo Segovia-Gutiérrez,
Christina Kurzthaler,
Stefan U. Egelhaaf,
Thomas Franosch
Abstract:
We study the 2D motion of colloidal dimers by single-particle tracking and compare the experimental observations obtained by bright-field microscopy to theoretical predictions for anisotropic diffusion. The comparison is based on the mean-square displacements in the laboratory and particle frame as well as generalizations of the self-intermediate scattering functions, which provide insights into t…
▽ More
We study the 2D motion of colloidal dimers by single-particle tracking and compare the experimental observations obtained by bright-field microscopy to theoretical predictions for anisotropic diffusion. The comparison is based on the mean-square displacements in the laboratory and particle frame as well as generalizations of the self-intermediate scattering functions, which provide insights into the rotational dynamics of the dimer. The diffusional anisotropy leads to a measurable translational-rotational coupling that becomes most prominent by aligning the coordinate system with the initial orientation of the particles. In particular, we find a splitting of the time-dependent diffusion coefficients parallel and perpendicular to the long axis of the dimer which decays over the orientational relaxation time. Deviations of the self-intermediate scattering functions from pure exponential relaxation are small but can be resolved experimentally. The theoretical predictions and experimental results agree quantitatively.
△ Less
Submitted 2 August, 2021;
originally announced August 2021.
-
Toward Cloud Tomography from Space using MISR and MODIS: The Physics of Image Formation for Opaque Convective Clouds
Authors:
Anthony B. Davis,
Linda Forster,
David J. Diner,
Bernhard Mayer
Abstract:
3D convective cloud images form via two intertwined radiative diffusion processes. Sunlight starts in the anti-solar direction and ends in toward-sensor ones, but repeated forward-peaked scattering smears the well-collimated beams across_direction_ space. This loss of directional memory in the cloud's "outer shell" (OS) is modeled as a random walk (RW) on the sphere. We show that, for typical clou…
▽ More
3D convective cloud images form via two intertwined radiative diffusion processes. Sunlight starts in the anti-solar direction and ends in toward-sensor ones, but repeated forward-peaked scattering smears the well-collimated beams across_direction_ space. This loss of directional memory in the cloud's "outer shell" (OS) is modeled as a random walk (RW) on the sphere. We show that, for typical cloud phase functions, 5 or 6 scatterings suffice for severe degrading of directionality. Simultaneously, a RW unfolds in_standard_ 3D space where steps are angularly-correlated, hence a drift in the original direction and an associated lateral dispersion. Any distinctive cloud image "feature" originates in the OS, and the shallower the better. That is also why we previously found that the optical depth of the "veiled core" (VC) is ~5. Significant amounts of sunlight thus arrive at the VC as a diffuse irradiance, and leave it even more isotropic. The diffusion limit of 3D radiative transfer (RT) is therefore valid inside the VC. Consequently, the underlying RW in the VC unfolds in 3D space, now with isotropic steps since extinction is scaled back to account for forward scattering. We show that the VC optical thickness controls cloud-scale brightness contrast between the illuminated and self-shaded sides of the cloud. Full cloud image formation thus involves diffusions (i.e., RWs) in both Euclidian and spherical/direction spaces. 3D cloud tomography based on MISR and MODIS multi-angle/-spectral data is an emerging technique in passive VNIR-SWIR sensing that will make judicious use this spatial separation of RT regimes to accelerate forward modeling without significant loss in accuracy.
△ Less
Submitted 26 July, 2021; v1 submitted 29 November, 2020;
originally announced November 2020.
-
Kartta Labs: Collaborative Time Travel
Authors:
Sasan Tavakkol,
Feng Han,
Brandon Mayer,
Mark Phillips,
Cyrus Shahabi,
Yao-Yi Chiang,
Raimondas Kiveris
Abstract:
We introduce the modular and scalable design of Kartta Labs, an open source, open data, and scalable system for virtually reconstructing cities from historical maps and photos. Kartta Labs relies on crowdsourcing and artificial intelligence consisting of two major modules: Maps and 3D models. Each module, in turn, consists of sub-modules that enable the system to reconstruct a city from historical…
▽ More
We introduce the modular and scalable design of Kartta Labs, an open source, open data, and scalable system for virtually reconstructing cities from historical maps and photos. Kartta Labs relies on crowdsourcing and artificial intelligence consisting of two major modules: Maps and 3D models. Each module, in turn, consists of sub-modules that enable the system to reconstruct a city from historical maps and photos. The result is a spatiotemporal reference that can be used to integrate various collected data (curated, sensed, or crowdsourced) for research, education, and entertainment purposes. The system empowers the users to experience collaborative time travel such that they work together to reconstruct the past and experience it on an open source and open data platform.
△ Less
Submitted 6 October, 2020;
originally announced October 2020.
-
Cloud Tomography from Space using MISR and MODIS: Locating the "Veiled Core" in Opaque Convective Clouds
Authors:
Linda Forster,
Anthony B. Davis,
David J. Diner,
Bernhard Mayer
Abstract:
For passive satellite imagers, current retrievals of cloud optical thickness and effective particle size fail for convective clouds with 3D morphology. Indeed, being based on 1D radiative transfer (RT) theory, they work well only for horizontally homogeneous clouds. A promising approach for treating clouds as fully 3D objects is cloud tomography, and this has been demonstrated for airborne observa…
▽ More
For passive satellite imagers, current retrievals of cloud optical thickness and effective particle size fail for convective clouds with 3D morphology. Indeed, being based on 1D radiative transfer (RT) theory, they work well only for horizontally homogeneous clouds. A promising approach for treating clouds as fully 3D objects is cloud tomography, and this has been demonstrated for airborne observations. For cloud tomography from space, however, more efficient forward 3D RT solvers are required. Here, we present a path forward, acknowledging that optically thick clouds have "veiled cores." Photons scattered into and out of this deep region do not contribute significant information to the observed imagery about the inner structure of the cloud. We investigate the location of the veiled core for the MISR and MODIS imagers. While MISR provides multi-angle imagery in the visible and near-IR, MODIS includes channels in the short-wave IR, albeit at a single view angle. This combination will enable future 3D retrievals to disentangle the cloud's effective particle size and optical thickness. We find that, in practice, the veiled core is located at an optical distance of $\approx$5 starting from the cloud boundary along the line-of-sight. For MODIS' absorbing wavelengths the veiled core covers a larger volume, starting at smaller optical distances. This result makes it possible to reduce the number of unknowns for the cloud tomographic reconstruction, and opens up new ways to increase the efficiency of the 3D RT solver at the heart of the reconstruction algorithm.
△ Less
Submitted 30 September, 2019;
originally announced October 2019.
-
Quantum dot optomechanics in suspended nanophononic strings
Authors:
Anja Vogele,
Maximilian M. Sonner,
Benjamin Mayer,
Xueyong Yuan,
Matthias Weiß,
Emeline D. S. Nysten,
Saimon F. Covre da Silva,
Armando Rastelli,
Hubert J. Krenner
Abstract:
The optomechanical coupling of quantum dots and flexural mechanical modes is studied in suspended nanophononic strings. The investigated devices are designed and monolithically fabricated on an (Al)GaAs heterostructure. Radio frequency elastic waves with frequencies ranging between $f$=250 MHz to 400 MHz are generated as Rayleigh surface acoustic waves on the unpatterned substrate and injected as…
▽ More
The optomechanical coupling of quantum dots and flexural mechanical modes is studied in suspended nanophononic strings. The investigated devices are designed and monolithically fabricated on an (Al)GaAs heterostructure. Radio frequency elastic waves with frequencies ranging between $f$=250 MHz to 400 MHz are generated as Rayleigh surface acoustic waves on the unpatterned substrate and injected as Lamb waves in the nanophononic string. Quantum dots inside the nanophononic string exhibit a 15-fold enhanced optomechanical modulation compared to those dynamically strained by the Rayleigh surface acoustic wave. Detailed finite element simulations of the phononic mode spectrum of the nanophononic string confirm, that the observed modulation arises from valence band deformation potential coupling via shear strain. The corresponding optomechanical coupling parameter is quantified to $0.15 \mathrm{meV nm^{-1}}$. This value exceeds that reported for vibrating nanorods by approximately one order of magnitude at 100 times higher frequencies. Using this value, a derive vertical displacements in the range of 10 nm is deduced from the experimentally observed modulation. The results represent an important step towards the creation of large scale optomechanical circuits interfacing single optically active quantum dots with optical and mechanical waves.
△ Less
Submitted 23 August, 2019;
originally announced August 2019.
-
Sub-cycle time resolution of multi-photon momentum transfer in strong-field ionization
Authors:
Benjamin Willenberg,
Jochen Maurer,
Benedikt W. Mayer,
Ursula Keller
Abstract:
During multi-photon ionization of an atom it is well understood how the involved photons transfer their energy to the ion and the photoelectron. However, the transfer of the photon linear momentum is still not fully understood. Here, we present a time-resolved measurement of linear momentum transfer along the laser pulse propagation direction. Beyond the limit of the electric dipole approximation…
▽ More
During multi-photon ionization of an atom it is well understood how the involved photons transfer their energy to the ion and the photoelectron. However, the transfer of the photon linear momentum is still not fully understood. Here, we present a time-resolved measurement of linear momentum transfer along the laser pulse propagation direction. Beyond the limit of the electric dipole approximation we observe a time-dependent momentum transfer. We can show that the time-averaged photon radiation pressure picture is not generally applicable and the linear momentum transfer to the photoelectron depends on the ionization time within the electromagnetic wave cycle using the attoclock technique. We can mostly explain the measured linear momentum transfer within a classical model for a free electron in a laser field. However, corrections are required due to the interaction of the outgoing photoelectron with the parent ion and due to the initial momentum when the electron appears in the continuum. The parent ion interaction induces a measurable negative attosecond time delay between the appearance in the continuum of the electron with minimal linear momentum transfer and the point in time with maximum ionization rate.
△ Less
Submitted 23 May, 2019;
originally announced May 2019.
-
ALIS: An efficient method to compute high spectral resolution polarized solar radiances using the Monte Carlo approach
Authors:
C. Emde,
R. Buras,
B. Mayer
Abstract:
An efficient method to compute accurate polarized solar radiance spectra using the (three-dimensional) Monte Carlo model MYSTIC has been developed. Such high resolution spectra are measured by various satellite instruments for remote sensing of atmospheric trace gases. ALIS (Absorption Lines Importance Sampling) allows the calculation of spectra by tracing photons at only one wavelength: In order…
▽ More
An efficient method to compute accurate polarized solar radiance spectra using the (three-dimensional) Monte Carlo model MYSTIC has been developed. Such high resolution spectra are measured by various satellite instruments for remote sensing of atmospheric trace gases. ALIS (Absorption Lines Importance Sampling) allows the calculation of spectra by tracing photons at only one wavelength: In order to take into account the spectral dependence of the absorption coefficient a spectral absorption weight is calculated for each photon path. At each scattering event the local estimate method is combined with an importance sampling method to take into account the spectral dependence of the scattering coefficient. Since each wavelength grid point is computed based on the same set of random photon paths, the statistical error is the almost same for all wavelengths and hence the simulated spectrum is not noisy. The statistical error mainly results in a small relative deviation which is independent of wavelength and can be neglected for those remote sensing applications where differential absorption features are of interest.
Two example applications are presented: The simulation of shortwave-infrared polarized spectra as measured by GOSAT from which CO$_2$ is retrieved, and the simulation of the differential optical thickness in the visible spectral range which is derived from SCIAMACHY measurements to retrieve NO$_2$. The computational speed of ALIS (for one- or three-dimensional atmospheres) is of the order of or even faster than that of one-dimensional discrete ordinate methods, in particular when polarization is considered.
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
Errors induced by the neglect of polarization in radiance calculations for three-dimensional cloudy atmospheres
Authors:
C. Emde,
B. Mayer
Abstract:
Remote sensing instruments observe radiation being scattered and absorbed by molecules, aerosol particles, cloud droplets and ice crystals. In order to interpret and accurately model such observations, the vector radiative transfer equation needs to be solved, because scattering polarizes the initially unpolarized incoming solar radiation. A widely used approximation in radiative transfer theory i…
▽ More
Remote sensing instruments observe radiation being scattered and absorbed by molecules, aerosol particles, cloud droplets and ice crystals. In order to interpret and accurately model such observations, the vector radiative transfer equation needs to be solved, because scattering polarizes the initially unpolarized incoming solar radiation. A widely used approximation in radiative transfer theory is the neglect of polarization which allows to greatly simplify the radiative transfer equation. It is well known that the error caused by multiple Rayleigh scattering can be larger than 10\%, depending on wavelength and sun-observer geometry (Mishchenko et al., 1994). For homogeneous plane-parallel layers of liquid cloud droplets the error is comparatively small (below 1\%) (Hansen 1971). However, in reality clouds are not plane-parallel layers of water droplets but complex three-dimensional (3D) structures and observations of clouds usually include pixels consisting of clear and cloudy parts. In this study we revisit the question of the magnitude of error due to the neglect of polarization in radiative transfer theory for a realistic 3D cloudy atmosphere. We apply the Monte Carlo radiative transfer model MYSTIC with and without neglecting polarization and compare the results. At a phase angle of 90° and 400nm wavelength we find the maximum overestimation error of about 8% for complete clear-sky conditions. The error is reduced to about 6% in clear-sky regions surrounded by clouds due to scattering from clouds into the clear regions. Within the clouds the error is up to 4% with the highest values in cloud shadows. In backscattering direction the radiance is underestimated by about 5% in clear regions between clouds. For other sun-observer geometries, the error ranges between the two extremes. The error decreases with wavelength and in the absorption bands.
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
IPRT polarized radiative transfer model intercomparison project - Three-dimensional test cases (phase B)
Authors:
C. Emde,
V. Barlakas,
C. Cornet,
F. Evans,
Z. Wang,
L. C. -Labonotte,
A. Macke,
B. Mayer,
M. Wendisch
Abstract:
Initially unpolarized solar radiation becomes polarized by scattering in the Earth's atmosphere. In particular molecular scattering polarizes electromagnetic radiation, but also scattering of radiation at aerosols, cloud droplets and ice crystals polarizes. Each atmospheric constituent produces a characteristic polarization signal, thus spectro-polarimetric measurements are frequently employed for…
▽ More
Initially unpolarized solar radiation becomes polarized by scattering in the Earth's atmosphere. In particular molecular scattering polarizes electromagnetic radiation, but also scattering of radiation at aerosols, cloud droplets and ice crystals polarizes. Each atmospheric constituent produces a characteristic polarization signal, thus spectro-polarimetric measurements are frequently employed for remote sensing of aerosol and cloud properties. Retrieval algorithms require efficient radiative transfer models. Usually, these apply the plane-parallel approximation, assuming that the atmosphere consists of horizontally homogeneous layers. For remote sensing applications, the radiance is considered constant over the instantaneous field-of-view of the instrument and each sensor element is treated independently in plane-parallel approximation, neglecting horizontal radiation transport between adjacent pixels. In order to estimate the errors due to the IPA approximation, three-dimensional (3D) vector radiative transfer models are required. So far, only a few such models exist. Therefore, the International Polarized Radiative Transfer (IPRT) working group of the International Radiation Commission (IRC) has initiated a model intercomparison project in order to provide benchmark results for polarized radiative transfer. The group has already performed an intercomparison for one-dimensional (1D) multi-layer test cases (Emde et al., 2015). This paper presents the continuation of the intercomparison project for 2D and 3D test cases: a step cloud, a cubic cloud, and a more realistic scenario including a 3D cloud field generated by a Large Eddy Simulation model and typical background aerosols. The commonly established benchmark results for 3D polarized radiative transfer are available at the IPRT website (http://www.meteo.physik.uni-muenchen.de/~iprt).
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
IPRT polarized radiative transfer model intercomparison project - Phase A
Authors:
C. Emde,
V. Barlakas,
C. Cornet,
F. Evans,
S. Korkin,
Y. Ota,
L. C. -Labonnote,
A. Lyapustin,
A. Macke,
B. Mayer,
M. Wendisch
Abstract:
The polarization state of electromagnetic radiation scattered by atmospheric particles such as aerosols, cloud droplets, or ice crystals contains much more information about the optical and microphysical properties than the total intensity alone. For this reason an increasing number of polarimetric observations are performed from space, from the ground and from aircraft. Polarized radiative transf…
▽ More
The polarization state of electromagnetic radiation scattered by atmospheric particles such as aerosols, cloud droplets, or ice crystals contains much more information about the optical and microphysical properties than the total intensity alone. For this reason an increasing number of polarimetric observations are performed from space, from the ground and from aircraft. Polarized radiative transfer models are required to interpret and analyze these measurements and to develop retrieval algorithms exploiting polarimetric observations. In the last years a large number of new codes have been developed, mostly for specific applications. Benchmark results are available for specific cases, but not for more sophisticated scenarios including polarized surface reflection and multi-layer atmospheres. The International Polarized Radiative Transfer (IPRT) working group of the International Radiation Commission (IRC) has initiated a model intercomparison project in order to fill this gap. This paper presents the results of the first phase A of the IPRT project which includes ten test cases, from simple setups with only one layer and Rayleigh scattering to rather sophisticated setups with a cloud embedded in a standard atmosphere above an ocean surface. All scenarios in the first phase A of the intercomparison project are for a one-dimensional plane-parallel model geometry. The commonly established benchmark results are available at the IPRT website (http://www.meteo.physik.uni-muenchen.de/~iprt).
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
Uncertainty-Aware Organ Classification for Surgical Data Science Applications in Laparoscopy
Authors:
S. Moccia,
S. J. Wirkert,
H. Kenngott,
A. S. Vemuri,
M. Apitz,
B. Mayer,
E. De Momi,
L. S. Mattos,
L. Maier-Hein
Abstract:
Objective: Surgical data science is evolving into a research field that aims to observe everything occurring within and around the treatment process to provide situation-aware data-driven assistance. In the context of endoscopic video analysis, the accurate classification of organs in the field of view of the camera proffers a technical challenge. Herein, we propose a new approach to anatomical st…
▽ More
Objective: Surgical data science is evolving into a research field that aims to observe everything occurring within and around the treatment process to provide situation-aware data-driven assistance. In the context of endoscopic video analysis, the accurate classification of organs in the field of view of the camera proffers a technical challenge. Herein, we propose a new approach to anatomical structure classification and image tagging that features an intrinsic measure of confidence to estimate its own performance with high reliability and which can be applied to both RGB and multispectral imaging (MI) data. Methods: Organ recognition is performed using a superpixel classification strategy based on textural and reflectance information. Classification confidence is estimated by analyzing the dispersion of class probabilities. Assessment of the proposed technology is performed through a comprehensive in vivo study with seven pigs. Results: When applied to image tagging, mean accuracy in our experiments increased from 65% (RGB) and 80% (MI) to 90% (RGB) and 96% (MI) with the confidence measure. Conclusion: Results showed that the confidence measure had a significant influence on the classification accuracy, and MI data are better suited for anatomical structure labeling than RGB data. Significance: This work significantly enhances the state of art in automatic labeling of endoscopic videos by introducing the use of the confidence metric, and by being the first study to use MI data for in vivo laparoscopic tissue classification. The data of our experiments will be released as the first in vivo MI dataset upon publication of this paper.
△ Less
Submitted 19 October, 2018; v1 submitted 21 June, 2017;
originally announced June 2017.
-
Interplay between Coulomb-focusing and non-dipole effects in strong-field ionization with elliptical polarization
Authors:
J. Maurer,
B. Willenberg,
B. W. Mayer,
C. R. Phillips,
L. Gallmann,
J. Danek,
M. Klaiber,
K. Z. Hatsagortsyan,
C. H. Keitel,
U. Keller
Abstract:
Strong-field ionization and rescattering beyond the long-wavelength limit of the dipole approximation is studied with elliptically polarized mid-IR pulses. We have measured the full three-dimensional photoelectron momentum distributions (3D PMDs) with velocity map imaging and tomographic reconstruction. The ellipticity-dependent 3D-PMD measurements revealed an unexpected sharp, thin line-shaped ri…
▽ More
Strong-field ionization and rescattering beyond the long-wavelength limit of the dipole approximation is studied with elliptically polarized mid-IR pulses. We have measured the full three-dimensional photoelectron momentum distributions (3D PMDs) with velocity map imaging and tomographic reconstruction. The ellipticity-dependent 3D-PMD measurements revealed an unexpected sharp, thin line-shaped ridge structure in the polarization plane for low momentum photoelectrons. With classical trajectory Monte Carlo (CTMC) simulations and analytical methods we identified the associated ionization dynamics for this sharp ridge to be due to Coulomb focusing of slow recollisions of electrons with a momentum approaching zero. This ridge is another example of the many different ways how the Coulomb field of the parent ion influences the different parts of the momentum space of the ionized electron wave packet. Building on this new understanding of the PMD, we extend our studies on the role played by the magnetic field component of the laser beam when operating beyond the long-wavelength limit of the dipole approximation. In this regime, we find that the PMD exhibits an ellipticity-dependent asymmetry along the beam propagation direction: the peak of the projection of the PMD onto the beam propagation axis is shifted from negative to positive values with increasing ellipticity. This turnover occurs rapidly once the ellipticity exceeds $\sim$0.1. We identify the sharp, thin line-shaped ridge structure in the polarization plane as the origin of the ellipticity-dependent PMD asymmetry in the beam propagation direction. These results yield fundamental insights into strong-field ionization processes, and should increase the precision of the emerging applications relying on this technique, including time-resolved holography and molecular imaging.
△ Less
Submitted 9 March, 2017;
originally announced March 2017.
-
Unsupervised temporal context learning using convolutional neural networks for laparoscopic workflow analysis
Authors:
Sebastian Bodenstedt,
Martin Wagner,
Darko Katić,
Patrick Mietkowski,
Benjamin Mayer,
Hannes Kenngott,
Beat Müller-Stich,
Rüdiger Dillmann,
Stefanie Speidel
Abstract:
Computer-assisted surgery (CAS) aims to provide the surgeon with the right type of assistance at the right moment. Such assistance systems are especially relevant in laparoscopic surgery, where CAS can alleviate some of the drawbacks that surgeons incur. For many assistance functions, e.g. displaying the location of a tumor at the appropriate time or suggesting what instruments to prepare next, an…
▽ More
Computer-assisted surgery (CAS) aims to provide the surgeon with the right type of assistance at the right moment. Such assistance systems are especially relevant in laparoscopic surgery, where CAS can alleviate some of the drawbacks that surgeons incur. For many assistance functions, e.g. displaying the location of a tumor at the appropriate time or suggesting what instruments to prepare next, analyzing the surgical workflow is a prerequisite. Since laparoscopic interventions are performed via endoscope, the video signal is an obvious sensor modality to rely on for workflow analysis.
Image-based workflow analysis tasks in laparoscopy, such as phase recognition, skill assessment, video indexing or automatic annotation, require a temporal distinction between video frames. Generally computer vision based methods that generalize from previously seen data are used. For training such methods, large amounts of annotated data are necessary. Annotating surgical data requires expert knowledge, therefore collecting a sufficient amount of data is difficult, time-consuming and not always feasible.
In this paper, we address this problem by presenting an unsupervised method for training a convolutional neural network (CNN) to differentiate between laparoscopic video frames on a temporal basis. We extract video frames at regular intervals from 324 unlabeled laparoscopic interventions, resulting in a dataset of approximately 2.2 million images. From this dataset, we extract image pairs from the same video and train a CNN to determine their temporal order. To solve this problem, the CNN has to extract features that are relevant for comprehending laparoscopic workflow.
Furthermore, we demonstrate that such a CNN can be adapted for surgical workflow segmentation. We performed image-based workflow segmentation on a publicly available dataset of 7 cholecystectomies and 9 colorectal interventions.
△ Less
Submitted 13 February, 2017;
originally announced February 2017.
-
Long-term mutual phase locking of picosecond pulse pairs generated by a semiconductor nanowire laser
Authors:
B. Mayer,
A. Regler,
S. Sterzl,
T. Stettner,
G. Koblmüller,
M. Kaniber,
B. Lingnau,
K. Lüdge,
J. J. Finley
Abstract:
The ability to generate phase-stabilised trains of ultrafast laser pulses by mode-locking underpins photonics research in fields such as precision metrology and spectroscopy. However, the complexity of conventional mode-locked laser systems, combined with the need for a mechanism to induce active or passive phase locking between resonator modes, has hindered their realisation at the nanoscale. Her…
▽ More
The ability to generate phase-stabilised trains of ultrafast laser pulses by mode-locking underpins photonics research in fields such as precision metrology and spectroscopy. However, the complexity of conventional mode-locked laser systems, combined with the need for a mechanism to induce active or passive phase locking between resonator modes, has hindered their realisation at the nanoscale. Here, we demonstrate that GaAs-AlGaAs nanowire lasers are capable of emitting pairs of phase-locked picosecond laser pulses when subject to non-resonant pulsed optical excitation with a repetition frequency up to ~200GHz. By probing the two-pulse interference that emerges within the homogeneously broadened laser emission, we show that the optical phase is preserved over timescales extending beyond ~30ps, much longer than the emitted laser pulse duration (~2ps). Simulations performed by solving the optical Bloch equations produce good quantitative agreement with experiments, revealing how the phase information is stored in the gain medium close to transparency. Our results open the way to applications such as on-chip, ultra-sensitive Ramsey comb spectroscopy.
△ Less
Submitted 7 March, 2016;
originally announced March 2016.
-
Controlled Polar Asymmetry of Few-Cycle and Intense Mid-Infrared Pulses
Authors:
Christian Schmidt,
Johannes Bühler,
Bernhard Mayer,
Alexej Pashkin,
Alfred Leitenstorfer,
Denis V. Seletskiy
Abstract:
We demonstrate synthesis of super-octave-spanning and phase-locked transients in the multi-terahertz frequency range with amplitudes exceeding 13 MV/cm. Sub-cycle polar asymmetry of the electric field is adjusted by changing the relative phase between superposed fundamental and second harmonic components. The resultant broken symmetry of the field profile is directly resolved via ultrabroadband el…
▽ More
We demonstrate synthesis of super-octave-spanning and phase-locked transients in the multi-terahertz frequency range with amplitudes exceeding 13 MV/cm. Sub-cycle polar asymmetry of the electric field is adjusted by changing the relative phase between superposed fundamental and second harmonic components. The resultant broken symmetry of the field profile is directly resolved via ultrabroadband electro-optic sampling. Access to such waveforms provides a direct route for control of low-energy degrees of freedom in condensed matter as well as non-perturbative light-matter interactions.
△ Less
Submitted 16 November, 2015;
originally announced November 2015.
-
Frequency-domain nonlinear optics in two-dimensionally patterned quasi-phase-matching media
Authors:
C. R. Phillips,
B. W. Mayer,
L. Gallmann,
U. Keller
Abstract:
Advances in the amplification and manipulation of ultrashort laser pulses has led to revolutions in several areas. Examples include chirped pulse amplification for generating high peak-power lasers, power-scalable amplification techniques, pulse shaping via modulation of spatially-dispersed laser pulses, and efficient frequency-mixing in quasi-phase-matched nonlinear crystals to access new spectra…
▽ More
Advances in the amplification and manipulation of ultrashort laser pulses has led to revolutions in several areas. Examples include chirped pulse amplification for generating high peak-power lasers, power-scalable amplification techniques, pulse shaping via modulation of spatially-dispersed laser pulses, and efficient frequency-mixing in quasi-phase-matched nonlinear crystals to access new spectral regions. In this work, we introduce and demonstrate a new platform for nonlinear optics which has the potential to combine all of these separate functionalities (pulse amplification, frequency transfer, and pulse shaping) into a single monolithic device. Moreover, our approach simultaneously offers solutions to the performance-limiting issues in the conventionally-used techniques, and supports scaling in power and bandwidth of the laser source. The approach is based on two-dimensional patterning of quasi-phase-matching gratings combined with optical parametric interactions involving spatially dispersed laser pulses. Our proof of principle experiment demonstrates this new paradigm via mid-infrared optical parametric chirped pulse amplification of few-cycle pulses.
△ Less
Submitted 21 September, 2015;
originally announced September 2015.
-
Tunneling Breakdown of a Strongly Correlated Insulating State in VO$_2$ Induced by Intense Multi-Terahertz Excitation
Authors:
B. Mayer,
C. Schmidt,
A. Grupp,
J. Bühler,
J. Oelmann,
R. E. Marvel,
R. F. Haglund Jr.,
T. Oka,
D. Brida,
A. Leitenstorfer,
A. Pashkin
Abstract:
We directly trace the near- and mid-infrared transmission change of a VO$_2$ thin film during an ultrafast insulator-to-metal transition triggered by high-field multi-terahertz transients. Non-thermal switching into a metastable metallic state is governed solely by the amplitude of the applied terahertz field. In contrast to resonant excitation below the threshold fluence, no signatures of exciton…
▽ More
We directly trace the near- and mid-infrared transmission change of a VO$_2$ thin film during an ultrafast insulator-to-metal transition triggered by high-field multi-terahertz transients. Non-thermal switching into a metastable metallic state is governed solely by the amplitude of the applied terahertz field. In contrast to resonant excitation below the threshold fluence, no signatures of excitonic self-trapping are observed. Our findings are consistent with the generation of spatially separated charge pairs and a cooperative transition into a delocalized metallic state by THz field-induced tunneling. The tunneling process is a condensed-matter analogue of the Schwinger effect in nonlinear quantum electrodynamics. We find good agreement with the pair production formula by replacing the Compton wavelength with an electronic correlation length of 2.1 $Å$.
△ Less
Submitted 8 May, 2015; v1 submitted 6 May, 2015;
originally announced May 2015.
-
Breakdown of the Dipole Approximation in Strong-Field Ionization
Authors:
A. Ludwig,
J. Maurer,
B. W. Mayer,
C. R. Phillips,
L. Gallmann,
U. Keller
Abstract:
We report the breakdown of the electric dipole approximation in the long-wavelength limit in strong-field ionization with linearly polarized few-cycle mid-infrared laser pulses at intensities on the order of 10$^{13}$ W/cm$^2$. Photoelectron momentum distributions were recorded by velocity map imaging and projected onto the beam propagation axis. We observe an increasing shift of the peak of this…
▽ More
We report the breakdown of the electric dipole approximation in the long-wavelength limit in strong-field ionization with linearly polarized few-cycle mid-infrared laser pulses at intensities on the order of 10$^{13}$ W/cm$^2$. Photoelectron momentum distributions were recorded by velocity map imaging and projected onto the beam propagation axis. We observe an increasing shift of the peak of this projection opposite to the beam propagation direction with increasing laser intensities. From a comparison with semi-classical simulations, we identify the combined action of the magnetic field of the laser pulse and the Coulomb potential as origin of our observations.
△ Less
Submitted 2 October, 2014; v1 submitted 11 August, 2014;
originally announced August 2014.
-
The Physics of the B Factories
Authors:
A. J. Bevan,
B. Golob,
Th. Mannel,
S. Prell,
B. D. Yabsley,
K. Abe,
H. Aihara,
F. Anulli,
N. Arnaud,
T. Aushev,
M. Beneke,
J. Beringer,
F. Bianchi,
I. I. Bigi,
M. Bona,
N. Brambilla,
J. B rodzicka,
P. Chang,
M. J. Charles,
C. H. Cheng,
H. -Y. Cheng,
R. Chistov,
P. Colangelo,
J. P. Coleman,
A. Drutskoy
, et al. (2009 additional authors not shown)
Abstract:
This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.
Please note that version 3 on the archive is the auxiliary…
▽ More
This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.
Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026.
△ Less
Submitted 31 October, 2015; v1 submitted 24 June, 2014;
originally announced June 2014.
-
Mid-infrared pulse generation via achromatic quasi-phase-matched OPCPA
Authors:
Benedikt W. Mayer,
Christopher R. Phillips,
Lukas Gallmann,
Ursula Keller
Abstract:
We demonstrate a new regime for mid-infrared optical parametric chirped pulse amplification (OPCPA) based on achromatic quasi-phase-matching. Our mid-infrared OPCPA system is based on collinear aperiodically poled lithium niobate (APPLN) pre-amplifiers and a non-collinear PPLN power amplifier. The idler output has a bandwidth of 800 nm centered at 3.4 $μ$m. After compression, we obtain a pulse dur…
▽ More
We demonstrate a new regime for mid-infrared optical parametric chirped pulse amplification (OPCPA) based on achromatic quasi-phase-matching. Our mid-infrared OPCPA system is based on collinear aperiodically poled lithium niobate (APPLN) pre-amplifiers and a non-collinear PPLN power amplifier. The idler output has a bandwidth of 800 nm centered at 3.4 $μ$m. After compression, we obtain a pulse duration of 44.2 fs and a pulse energy of 21.8 $μ$J at a repetition rate of 50 kHz. We explain the wide applicability of the non-collinear QPM amplification scheme we used, including how it can enable octave-spanning OPCPA in a single device when combined with an aperiodic QPM grating.
△ Less
Submitted 13 June, 2014; v1 submitted 7 April, 2014;
originally announced April 2014.
-
Non-perturbative Interband Response of InSb Driven Off-resonantly by Few-cycle Electromagnetic Transients
Authors:
F. Junginger,
B. Mayer,
C. Schmidt,
O. Schubert,
S. Mährlein,
A. Leitenstorfer,
R. Huber,
A. Pashkin
Abstract:
Intense multi-THz pulses are used to study the coherent nonlinear response of bulk InSb by means of field-resolved four-wave mixing spectroscopy. At amplitudes above 5 MV/cm the signals show a clear temporal substructure which is unexpected in perturbative nonlinear optics. Simulations based on a two-level quantum system demonstrate that in spite of the strongly off-resonant character of the excit…
▽ More
Intense multi-THz pulses are used to study the coherent nonlinear response of bulk InSb by means of field-resolved four-wave mixing spectroscopy. At amplitudes above 5 MV/cm the signals show a clear temporal substructure which is unexpected in perturbative nonlinear optics. Simulations based on a two-level quantum system demonstrate that in spite of the strongly off-resonant character of the excitation the high-field pulses drive the interband resonances into a non-perturbative regime of Rabi flopping.
△ Less
Submitted 29 August, 2012;
originally announced August 2012.