-
Integrated photoelasticity in a soft material: phase retardation, azimuthal angle and stress-optic coefficient
Authors:
Yuto Yokoyama,
Benjamin R. Mitchell,
Ali Nassiri,
Brad L. Kinsey,
Yannis P. Korkolis,
Yoshiyuki Tagawa
Abstract:
Integrated photoelasticity is investigated for a soft material subjected to a three-dimensional stress state. In the experiment, a solid sphere is pressed against a gelatin gel (Young's modulus is about 4.2 kPa) that deforms up to 4.5 mm depending on the loading forces. The resulting photoelastic parameters (phase retardation, azimuthal angle, and stress-optic coefficient) in the gel are measured…
▽ More
Integrated photoelasticity is investigated for a soft material subjected to a three-dimensional stress state. In the experiment, a solid sphere is pressed against a gelatin gel (Young's modulus is about 4.2 kPa) that deforms up to 4.5 mm depending on the loading forces. The resulting photoelastic parameters (phase retardation, azimuthal angle, and stress-optic coefficient) in the gel are measured using a polarization camera. The measured retardation and azimuth are compared with the analytical prediction based on Hertzian contact theory. Remarkably, experimental and analytical results of the photoelastic parameters show a reasonable agreement not only in the retardation but also in the azimuth that is related to the direction of principal stresses and but rarely validated in previous studies, is essential for reconstructing three-dimensional stress fields in soft materials. The stress-optic coefficient of the gelatin gel used is 3.12$\times10^{-8}$ 1/Pa. Such findings proved that integrated photoelasticity is useful for measuring the three-dimensional stress field in soft materials, which is of importance in biomedical engineering and cell printing applications.
△ Less
Submitted 8 July, 2022;
originally announced August 2022.
-
Optimal efficiency of high frequency chest wall oscillations and links with resistance and compliance in a model of the lung
Authors:
Michaël Brunengo,
Barrett R. Mitchell,
Antonello Nicolini,
Bernard Rousselet,
Benjamin Mauroy
Abstract:
Chest physiotherapy is a set of techniques used to help the draining of the mucus from the lung in pathological situations. The choice of the techniques, and their adjustment to the patients or to the pathologies, remains as of today largely empirical. High Frequency Chest Wall Oscillation (HFCWO) is one of these techniques, performed with a device that applies oscillating pressures on the chest.…
▽ More
Chest physiotherapy is a set of techniques used to help the draining of the mucus from the lung in pathological situations. The choice of the techniques, and their adjustment to the patients or to the pathologies, remains as of today largely empirical. High Frequency Chest Wall Oscillation (HFCWO) is one of these techniques, performed with a device that applies oscillating pressures on the chest. However, there is no clear understanding of how HFCWO devices interact with the lung biomechanics. Hence, we study idealised HFCWO manipulations applied to a mathematical and numerical model of the biomechanics of the lung. The lung is represented by a fluid--structure interaction model based on an airway tree that is coupled to an homogeneous elastic medium. We show that our model is driven by two dimensionless numbers that drive the effect of the idealised HFCWO manipulation on the model of the lung. Our model allow to analyze the stress applied to an idealised mucus by the air--mucus interaction and by the airway walls deformation. This stress behaves as a buffer and has the effect of reducing the stress needed to overcome the idealised mucus yield stress. Moreover, our model predicts the existence of an optimal range of the working frequencies of HFCWO. This range is in agreement with the frequencies actually used by practitioners during HFCWO maneuvers. Finally, our model suggests that analyzing the mouth airflow during HFCWO maneuvers could allow to estimate the compliance and the hydrodynamic resistance of the lung of a patient.
△ Less
Submitted 26 November, 2021; v1 submitted 5 August, 2021;
originally announced August 2021.
-
Towards the modeling of mucus draining from human lung: role of airways deformation on air-mucus interaction
Authors:
Benjamin Mauroy,
Patrice Flaud,
Dominique Pelca,
Christian Fausser,
Jacques Merckx,
Barrett R. Mitchell
Abstract:
Chest physiotherapy is an empirical technique used to help secretions to get out of the lung whenever stagnation occurs. Although commonly used, little is known about the inner mechanisms of chest physiotherapy and controversies about its use are coming out regularly. Thus, a scientific validation of chest physiotherapy is needed to evaluate its effects on secretions.
We setup a quasi-static num…
▽ More
Chest physiotherapy is an empirical technique used to help secretions to get out of the lung whenever stagnation occurs. Although commonly used, little is known about the inner mechanisms of chest physiotherapy and controversies about its use are coming out regularly. Thus, a scientific validation of chest physiotherapy is needed to evaluate its effects on secretions.
We setup a quasi-static numerical model of chest physiotherapy based on thorax and lung physiology and on their respective biophysics. We modeled the lung with an idealized deformable symmetric bifurcating tree. Bronchi and their inner fluids mechanics are assumed axisymmetric. Static data from the literature is used to build a model for the lung's mechanics. Secretions motion is the consequence of the shear constraints apply by the air flow. The input of the model is the pressure on the chest wall at each time, and the output is the bronchi geometry and air and secretions properties.
In the limit of our model, we mimicked manual and mechanical chest physiotherapy techniques. We show that for secretions to move, air flow has to be high enough to overcome secretion resistance to motion. Moreover, the higher the pressure or the quicker it is applied, the higher is the air flow and thus the mobilization of secretions. However, pressures too high are efficient up to a point where airways compressions prevents air flow to increases any further. Generally, the first effects of manipulations is a decrease of the airway tree hydrodynamic resistance, thus improving ventilation even if secretions do not get out of the lungs. Also, some secretions might be pushed deeper into the lungs; this effect is stronger for high pressures and for mechanical chest physiotherapy. Finally, we propose and tested two adimensional numbers that depend on lung properties and that allow to measure the efficiency and comfort of a manipulation.
△ Less
Submitted 15 February, 2015;
originally announced February 2015.
