-
Report on the Advanced Linear Collider Study Group (ALEGRO) Workshop 2024
Authors:
J. Vieira,
B. Cros,
P. Muggli,
I. A. Andriyash,
O. Apsimon,
M. Backhouse,
C. Benedetti,
S. S. Bulanov,
A. Caldwell,
Min Chen,
V. Cilento,
S. Corde,
R. D'Arcy,
S. Diederichs,
E. Ericson,
E. Esarey,
J. Farmer,
L. Fedeli,
A. Formenti,
B. Foster,
M. Garten,
C. G. R. Geddes,
T. Grismayer,
M. J. Hogan,
S. Hooker
, et al. (19 additional authors not shown)
Abstract:
The workshop focused on the application of ANAs to particle physics keeping in mind the ultimate goal of a collider at the energy frontier (10\,TeV, e$^+$/e$^-$, e$^-$/e$^-$, or $γγ$). The development of ANAs is conducted at universities and national laboratories worldwide. The community is thematically broad and diverse, in particular since lasers suitable for ANA research (multi-hundred-terawatt…
▽ More
The workshop focused on the application of ANAs to particle physics keeping in mind the ultimate goal of a collider at the energy frontier (10\,TeV, e$^+$/e$^-$, e$^-$/e$^-$, or $γγ$). The development of ANAs is conducted at universities and national laboratories worldwide. The community is thematically broad and diverse, in particular since lasers suitable for ANA research (multi-hundred-terawatt peak power, a few tens of femtosecond-long pulses) and acceleration of electrons to hundreds of mega electron volts to multi giga electron volts became commercially available. The community spans several continents (Europe, America, Asia), including more than 62 laboratories in more than 20 countries. It is among the missions of the ICFA-ANA panel to feature the amazing progress made with ANAs, to provide international coordination and to foster international collaborations towards a future HEP collider. The scope of this edition of the workshop was to discuss the recent progress and necessary steps towards realizing a linear collider for particle physics based on novel-accelerator technologies (laser or beam driven in plasma or structures). Updates on the relevant aspects of the European Strategy for Particle Physics (ESPP) Roadmap Process as well as of the P5 (in the US) were presented, and ample time was dedicated to discussions. The major outcome of the workshop is the decision for ALEGRO to coordinate efforts in Europe, in the US, and in Asia towards a pre-CDR for an ANA-based, 10\,TeV CM collider. This goal of this coordination is to lead to a funding proposal to be submitted to both EU and EU/US funding agencies. This document presents a summary of the workshop, as seen by the co-chairs, as well as short 'one-pagers' written by the presenters at the workshop.
△ Less
Submitted 6 August, 2024;
originally announced August 2024.
-
Synthesizing Particle-in-Cell Simulations Through Learning and GPU Computing for Hybrid Particle Accelerator Beamlines
Authors:
Ryan T. Sandberg,
Remi Lehe,
Chad E. Mitchell,
Marco Garten,
Andrew Myers,
Ji Qiang,
Jean-Luc Vay,
Axel Huebl
Abstract:
Particle accelerator modeling is an important field of research and development, essential to investigating, designing and operating some of the most complex scientific devices ever built. Kinetic simulations of relativistic, charged particle beams and advanced plasma accelerator elements are often performed with high-fidelity particle-in-cell simulations, some of which fill the largest GPU superc…
▽ More
Particle accelerator modeling is an important field of research and development, essential to investigating, designing and operating some of the most complex scientific devices ever built. Kinetic simulations of relativistic, charged particle beams and advanced plasma accelerator elements are often performed with high-fidelity particle-in-cell simulations, some of which fill the largest GPU supercomputers. Start-to-end modeling of a particle accelerator includes many elements and it is desirable to integrate and model advanced accelerator elements fast, in effective models. Traditionally, analytical and reduced-physics models fill this role. The vast data from high-fidelity simulations and power of GPU-accelerated computation open a new opportunity to complement traditional modeling without approximations: surrogate modeling through machine learning. In this paper, we implement, present and benchmark such a data-driven workflow, synthesising a fully GPU-accelerated, conventional-surrogate simulation for hybrid particle accelerator beamlines.
△ Less
Submitted 30 April, 2024; v1 submitted 27 February, 2024;
originally announced February 2024.
-
Laser-Plasma Ion Beam Booster Based on Hollow-Channel Magnetic Vortex Acceleration
Authors:
Marco Garten,
Stepan S. Bulanov,
Sahel Hakimi,
Lieselotte Obst-Huebl,
Chad E. Mitchell,
Carl Schroeder,
Eric Esarey,
Cameron G. R. Geddes,
Jean-Luc Vay,
Axel Huebl
Abstract:
Laser-driven ion acceleration provides ultra-short, high-charge, low-emittance beams, which are desirable for a wide range of high-impact applications. Yet after decades of research, a significant increase in maximum ion energy is still needed. This work introduces a quality-preserving staging concept for ultra-intense ion bunches that is seamlessly applicable from the non-relativistic plasma sour…
▽ More
Laser-driven ion acceleration provides ultra-short, high-charge, low-emittance beams, which are desirable for a wide range of high-impact applications. Yet after decades of research, a significant increase in maximum ion energy is still needed. This work introduces a quality-preserving staging concept for ultra-intense ion bunches that is seamlessly applicable from the non-relativistic plasma source to the relativistic regime. Full 3D particle-in-cell simulations prove robustness and capture of a high-charge proton bunch, suitable for readily available and near-term laser facilities.
△ Less
Submitted 5 May, 2024; v1 submitted 9 August, 2023;
originally announced August 2023.
-
From Compact Plasma Particle Sources to Advanced Accelerators with Modeling at Exascale
Authors:
Axel Huebl,
Remi Lehe,
Edoardo Zoni,
Olga Shapoval,
Ryan T. Sandberg,
Marco Garten,
Arianna Formenti,
Revathi Jambunathan,
Prabhat Kumar,
Kevin Gott,
Andrew Myers,
Weiqun Zhang,
Ann Almgren,
Chad E. Mitchell,
Ji Qiang,
David Grote,
Alexander Sinn,
Severin Diederichs,
Maxence Thevenet,
Luca Fedeli,
Thomas Clark,
Neil Zaim,
Henri Vincenti,
Jean-Luc Vay
Abstract:
Developing complex, reliable advanced accelerators requires a coordinated, extensible, and comprehensive approach in modeling, from source to the end of beam lifetime. We present highlights in Exascale Computing to scale accelerator modeling software to the requirements set for contemporary science drivers. In particular, we present the first laser-plasma modeling on an exaflop supercomputer using…
▽ More
Developing complex, reliable advanced accelerators requires a coordinated, extensible, and comprehensive approach in modeling, from source to the end of beam lifetime. We present highlights in Exascale Computing to scale accelerator modeling software to the requirements set for contemporary science drivers. In particular, we present the first laser-plasma modeling on an exaflop supercomputer using the US DOE Exascale Computing Project WarpX. Leveraging developments for Exascale, the new DOE SCIDAC-5 Consortium for Advanced Modeling of Particle Accelerators (CAMPA) will advance numerical algorithms and accelerate community modeling codes in a cohesive manner: from beam source, over energy boost, transport, injection, storage, to application or interaction. Such start-to-end modeling will enable the exploration of hybrid accelerators, with conventional and advanced elements, as the next step for advanced accelerator modeling. Following open community standards, we seed an open ecosystem of codes that can be readily combined with each other and machine learning frameworks. These will cover ultrafast to ultraprecise modeling for future hybrid accelerator design, even enabling virtual test stands and twins of accelerators that can be used in operations.
△ Less
Submitted 18 April, 2023; v1 submitted 22 March, 2023;
originally announced March 2023.
-
Next Generation Computational Tools for the Modeling and Design of Particle Accelerators at Exascale
Authors:
Axel Huebl,
Remi Lehe,
Chad E. Mitchell,
Ji Qiang,
Robert D. Ryne,
Ryan T. Sandberg,
Jean-Luc Vay
Abstract:
Particle accelerators are among the largest, most complex devices. To meet the challenges of increasing energy, intensity, accuracy, compactness, complexity and efficiency, increasingly sophisticated computational tools are required for their design and optimization. It is key that contemporary software take advantage of the latest advances in computer hardware and scientific software engineering…
▽ More
Particle accelerators are among the largest, most complex devices. To meet the challenges of increasing energy, intensity, accuracy, compactness, complexity and efficiency, increasingly sophisticated computational tools are required for their design and optimization. It is key that contemporary software take advantage of the latest advances in computer hardware and scientific software engineering practices, delivering speed, reproducibility and feature composability for the aforementioned challenges. A new open source software stack is being developed at the heart of the Beam pLasma Accelerator Simulation Toolkit (BLAST) by LBNL and collaborators, providing new particle-in-cell modeling codes capable of exploiting the power of GPUs on Exascale supercomputers. Combined with advanced numerical techniques, such as mesh-refinement, and intrinsic support for machine learning, these codes are primed to provide ultrafast to ultraprecise modeling for future accelerator design and operations.
△ Less
Submitted 9 August, 2022; v1 submitted 3 August, 2022;
originally announced August 2022.
-
Using Kernel-Based Statistical Distance to Study the Dynamics of Charged Particle Beams in Particle-Based Simulation Codes
Authors:
Chad E. Mitchell,
Robert D. Ryne,
Kilean Hwang
Abstract:
Measures of discrepancy between probability distributions (statistical distance) are widely used in the fields of artificial intelligence and machine learning. We describe how certain measures of statistical distance can be implemented as numerical diagnostics for simulations involving charged-particle beams. Related measures of statistical dependence are also described. The resulting diagnostics…
▽ More
Measures of discrepancy between probability distributions (statistical distance) are widely used in the fields of artificial intelligence and machine learning. We describe how certain measures of statistical distance can be implemented as numerical diagnostics for simulations involving charged-particle beams. Related measures of statistical dependence are also described. The resulting diagnostics provide sensitive measures of dynamical processes important for beams in nonlinear or high-intensity systems, which are otherwise difficult to characterize. The focus is on kernel-based methods such as Maximum Mean Discrepancy, which have a well-developed mathematical foundation and reasonable computational complexity. Several benchmark problems and examples involving intense beams are discussed. While the focus is on charged-particle beams, these methods may also be applied to other many-body systems such as plasmas or gravitational systems.
△ Less
Submitted 8 April, 2022;
originally announced April 2022.
-
Simulations of Future Particle Accelerators: Issues and Mitigations
Authors:
D. Sagan,
M. Berz,
N. M. Cook,
Y. Hao,
G. Hoffstaetter,
A. Huebl,
C. -K. Huang,
M. H. Langston,
C. E. Mayes,
C. E. Mitchell,
C. -K. Ng,
J. Qiang,
R. D. Ryne,
A. Scheinker,
E. Stern,
J. -L. Vay,
D. Winklehner,
H. Zhang
Abstract:
The ever increasing demands placed upon machine performance have resulted in the need for more comprehensive particle accelerator modeling. Computer simulations are key to the success of particle accelerators. Many aspects of particle accelerators rely on computer modeling at some point, sometimes requiring complex simulation tools and massively parallel supercomputing. Examples include the modeli…
▽ More
The ever increasing demands placed upon machine performance have resulted in the need for more comprehensive particle accelerator modeling. Computer simulations are key to the success of particle accelerators. Many aspects of particle accelerators rely on computer modeling at some point, sometimes requiring complex simulation tools and massively parallel supercomputing. Examples include the modeling of beams at extreme intensities and densities (toward the quantum degeneracy limit), and with ultra-fine control (down to the level of individual particles). In the future, adaptively tuned models might also be relied upon to provide beam measurements beyond the resolution of existing diagnostics. Much time and effort has been put into creating accelerator software tools, some of which are highly successful. However, there are also shortcomings such as the general inability of existing software to be easily modified to meet changing simulation needs. In this paper possible mitigating strategies are discussed for issues faced by the accelerator community as it endeavors to produce better and more comprehensive modeling tools. This includes lack of coordination between code developers, lack of standards to make codes portable and/or reusable, lack of documentation, among others.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
Extracting Dynamical Frequencies from Invariants of Motion in Finite-Dimensional Nonlinear Integrable Systems
Authors:
Chad E. Mitchell,
Robert D. Ryne,
Kilean Hwang,
Sergei Nagaitsev,
Timofey Zolkin
Abstract:
Integrable dynamical systems play an important role in many areas of science, including accelerator and plasma physics. An integrable dynamical system with $n$ degrees of freedom (DOF) possesses $n$ nontrivial integrals of motion, and can be solved, in principle, by covering the phase space with one or more charts in which the dynamics can be described using action-angle coordinates. To obtain the…
▽ More
Integrable dynamical systems play an important role in many areas of science, including accelerator and plasma physics. An integrable dynamical system with $n$ degrees of freedom (DOF) possesses $n$ nontrivial integrals of motion, and can be solved, in principle, by covering the phase space with one or more charts in which the dynamics can be described using action-angle coordinates. To obtain the frequencies of motion, both the transformation to action-angle coordinates and its inverse must be known in explicit form. However, no general algorithm exists for constructing this transformation explicitly from a set of $n$ known (and generally coupled) integrals of motion. In this paper we describe how one can determine the dynamical frequencies of the motion as functions of these $n$ integrals in the absence of explicitly-known action-angle variables, and we provide several examples.
△ Less
Submitted 10 June, 2021; v1 submitted 4 June, 2021;
originally announced June 2021.
-
Accurate Transfer Maps for Realistic Beamline Elements: Part I, Straight Elements
Authors:
Chad E. Mitchell,
Alex J. Dragt
Abstract:
The behavior of orbits in charged-particle beam transport systems, including both linear and circular accelerators as well as final focus sections and spectrometers, can depend sensitively on nonlinear fringe-field and high-order-multipole effects in the various beam-line elements. The inclusion of these effects requires a detailed and realistic model of the interior and fringe fields, including…
▽ More
The behavior of orbits in charged-particle beam transport systems, including both linear and circular accelerators as well as final focus sections and spectrometers, can depend sensitively on nonlinear fringe-field and high-order-multipole effects in the various beam-line elements. The inclusion of these effects requires a detailed and realistic model of the interior and fringe fields, including their high spatial derivatives. A collection of surface fitting methods has been developed for extracting this information accurately from 3-dimensional field data on a grid, as provided by various 3-dimensional finite-element field codes. Based on these realistic field models, Lie or other methods may be used to compute accurate design orbits and accurate transfer maps about these orbits. Part I of this work presents a treatment of straight-axis magnetic elements, while Part II will treat bending dipoles with large sagitta. An exactly-soluble but numerically challenging model field is used to provide a rigorous collection of performance benchmarks.
△ Less
Submitted 5 May, 2010; v1 submitted 9 January, 2010;
originally announced January 2010.
