-
AfriMTE and AfriCOMET: Enhancing COMET to Embrace Under-resourced African Languages
Authors:
Jiayi Wang,
David Ifeoluwa Adelani,
Sweta Agrawal,
Marek Masiak,
Ricardo Rei,
Eleftheria Briakou,
Marine Carpuat,
Xuanli He,
Sofia Bourhim,
Andiswa Bukula,
Muhidin Mohamed,
Temitayo Olatoye,
Tosin Adewumi,
Hamam Mokayed,
Christine Mwase,
Wangui Kimotho,
Foutse Yuehgoh,
Anuoluwapo Aremu,
Jessica Ojo,
Shamsuddeen Hassan Muhammad,
Salomey Osei,
Abdul-Hakeem Omotayo,
Chiamaka Chukwuneke,
Perez Ogayo,
Oumaima Hourrane
, et al. (33 additional authors not shown)
Abstract:
Despite the recent progress on scaling multilingual machine translation (MT) to several under-resourced African languages, accurately measuring this progress remains challenging, since evaluation is often performed on n-gram matching metrics such as BLEU, which typically show a weaker correlation with human judgments. Learned metrics such as COMET have higher correlation; however, the lack of eval…
▽ More
Despite the recent progress on scaling multilingual machine translation (MT) to several under-resourced African languages, accurately measuring this progress remains challenging, since evaluation is often performed on n-gram matching metrics such as BLEU, which typically show a weaker correlation with human judgments. Learned metrics such as COMET have higher correlation; however, the lack of evaluation data with human ratings for under-resourced languages, complexity of annotation guidelines like Multidimensional Quality Metrics (MQM), and limited language coverage of multilingual encoders have hampered their applicability to African languages. In this paper, we address these challenges by creating high-quality human evaluation data with simplified MQM guidelines for error detection and direct assessment (DA) scoring for 13 typologically diverse African languages. Furthermore, we develop AfriCOMET: COMET evaluation metrics for African languages by leveraging DA data from well-resourced languages and an African-centric multilingual encoder (AfroXLM-R) to create the state-of-the-art MT evaluation metrics for African languages with respect to Spearman-rank correlation with human judgments (0.441).
△ Less
Submitted 23 April, 2024; v1 submitted 16 November, 2023;
originally announced November 2023.
-
Electromechanical Study of a Ring-Brush Sliding Contact
Authors:
Eddy Chevallier,
Tania Garcia,
Sabrina Ait Mohamed
Abstract:
We report a study about the electrical response from a sliding contact made of a silver-graphite brush and a brass ring. This study focuses specifically on the voltage variations due to the mechanical interactions across the contact according to the rotational speed. This study is part of the research and the development about the monitoring of dynamical interfaces.
We report a study about the electrical response from a sliding contact made of a silver-graphite brush and a brass ring. This study focuses specifically on the voltage variations due to the mechanical interactions across the contact according to the rotational speed. This study is part of the research and the development about the monitoring of dynamical interfaces.
△ Less
Submitted 19 September, 2023; v1 submitted 12 September, 2023;
originally announced September 2023.
-
Lexicon and Rule-based Word Lemmatization Approach for the Somali Language
Authors:
Shafie Abdi Mohamed,
Muhidin Abdullahi Mohamed
Abstract:
Lemmatization is a Natural Language Processing (NLP) technique used to normalize text by changing morphological derivations of words to their root forms. It is used as a core pre-processing step in many NLP tasks including text indexing, information retrieval, and machine learning for NLP, among others. This paper pioneers the development of text lemmatization for the Somali language, a low-resour…
▽ More
Lemmatization is a Natural Language Processing (NLP) technique used to normalize text by changing morphological derivations of words to their root forms. It is used as a core pre-processing step in many NLP tasks including text indexing, information retrieval, and machine learning for NLP, among others. This paper pioneers the development of text lemmatization for the Somali language, a low-resource language with very limited or no prior effective adoption of NLP methods and datasets. We especially develop a lexicon and rule-based lemmatizer for Somali text, which is a starting point for a full-fledged Somali lemmatization system for various NLP tasks. With consideration of the language morphological rules, we have developed an initial lexicon of 1247 root words and 7173 derivationally related terms enriched with rules for lemmatizing words not present in the lexicon. We have tested the algorithm on 120 documents of various lengths including news articles, social media posts, and text messages. Our initial results demonstrate that the algorithm achieves an accuracy of 57\% for relatively long documents (e.g. full news articles), 60.57\% for news article extracts, and high accuracy of 95.87\% for short texts such as social media messages.
△ Less
Submitted 3 August, 2023;
originally announced August 2023.
-
Group Activity Recognition in Computer Vision: A Comprehensive Review, Challenges, and Future Perspectives
Authors:
Chuanchuan Wang,
Ahmad Sufril Azlan Mohamed
Abstract:
Group activity recognition is a hot topic in computer vision. Recognizing activities through group relationships plays a vital role in group activity recognition. It holds practical implications in various scenarios, such as video analysis, surveillance, automatic driving, and understanding social activities. The model's key capabilities encompass efficiently modeling hierarchical relationships wi…
▽ More
Group activity recognition is a hot topic in computer vision. Recognizing activities through group relationships plays a vital role in group activity recognition. It holds practical implications in various scenarios, such as video analysis, surveillance, automatic driving, and understanding social activities. The model's key capabilities encompass efficiently modeling hierarchical relationships within a scene and accurately extracting distinctive spatiotemporal features from groups. Given this technology's extensive applicability, identifying group activities has garnered significant research attention. This work examines the current progress in technology for recognizing group activities, with a specific focus on global interactivity and activities. Firstly, we comprehensively review the pertinent literature and various group activity recognition approaches, from traditional methodologies to the latest methods based on spatial structure, descriptors, non-deep learning, hierarchical recurrent neural networks (HRNN), relationship models, and attention mechanisms. Subsequently, we present the relational network and relational architectures for each module. Thirdly, we investigate methods for recognizing group activity and compare their performance with state-of-the-art technologies. We summarize the existing challenges and provide comprehensive guidance for newcomers to understand group activity recognition. Furthermore, we review emerging perspectives in group activity recognition to explore new directions and possibilities.
△ Less
Submitted 25 July, 2023;
originally announced July 2023.
-
CloudScent: a model for code smell analysis in open-source cloud
Authors:
Raj Narendra Shah,
Sameer Ahmed Mohamed,
Asif Imran,
Tevfik Kosar
Abstract:
The low cost and rapid provisioning capabilities have made open-source cloud a desirable platform to launch industrial applications. However, as open-source cloud moves towards maturity, it still suffers from quality issues like code smells. Although, a great emphasis has been provided on the economic benefits of deploying open-source cloud, low importance has been provided to improve the quality…
▽ More
The low cost and rapid provisioning capabilities have made open-source cloud a desirable platform to launch industrial applications. However, as open-source cloud moves towards maturity, it still suffers from quality issues like code smells. Although, a great emphasis has been provided on the economic benefits of deploying open-source cloud, low importance has been provided to improve the quality of the source code of the cloud itself to ensure its maintainability in the industrial scenario. Code refactoring has been associated with improving the maintenance and understanding of software code by removing code smells. However, analyzing what smells are more prevalent in cloud environment and designing a tool to define and detect those smells require further attention. In this paper, we propose a model called CloudScent which is an open source mechanism to detect smells in open-source cloud. We test our experiments in a real-life cloud environment using OpenStack. Results show that CloudScent is capable of accurately detecting 8 code smells in cloud. This will permit cloud service providers with advanced knowledge about the smells prevalent in open-source cloud platform, thus allowing for timely code refactoring and improving code quality of the cloud platforms.
△ Less
Submitted 22 July, 2023;
originally announced July 2023.
-
Energy-Efficient Mobile Robot Control via Run-time Monitoring of Environmental Complexity and Computing Workload
Authors:
Sherif A. S. Mohamed,
Mohammad-Hashem Haghbayan,
Antonio Miele,
Onur Mutlu,
Juha Plosila
Abstract:
We propose an energy-efficient controller to minimize the energy consumption of a mobile robot by dynamically manipulating the mechanical and computational actuators of the robot. The mobile robot performs real-time vision-based applications based on an event-based camera. The actuators of the controller are CPU voltage/frequency for the computation part and motor voltage for the mechanical part.…
▽ More
We propose an energy-efficient controller to minimize the energy consumption of a mobile robot by dynamically manipulating the mechanical and computational actuators of the robot. The mobile robot performs real-time vision-based applications based on an event-based camera. The actuators of the controller are CPU voltage/frequency for the computation part and motor voltage for the mechanical part. We show that independently considering speed control of the robot and voltage/frequency control of the CPU does not necessarily result in an energy-efficient solution. In fact, to obtain the highest efficiency, the computation and mechanical parts should be controlled together in synergy. We propose a fast hill-climbing optimization algorithm to allow the controller to find the best CPU/motor configuration at run-time and whenever the mobile robot is facing a new environment during its travel. Experimental results on a robot with Brushless DC Motors, Jetson TX2 board as the computing unit, and a DAVIS-346 event-based camera show that the proposed control algorithm can save battery energy by an average of 50.5%, 41%, and 30%, in low-complexity, medium-complexity, and high-complexity environments, over baselines.
△ Less
Submitted 8 September, 2021;
originally announced September 2021.
-
Asynchronous Corner Tracking Algorithm based on Lifetime of Events for DAVIS Cameras
Authors:
Sherif A. S. Mohamed,
Jawad N. Yasin,
Mohammad-Hashem Haghbayan,
Antonio Miele,
Jukka Heikkonen,
Hannu Tenhunen,
Juha Plosila
Abstract:
Event cameras, i.e., the Dynamic and Active-pixel Vision Sensor (DAVIS) ones, capture the intensity changes in the scene and generates a stream of events in an asynchronous fashion. The output rate of such cameras can reach up to 10 million events per second in high dynamic environments. DAVIS cameras use novel vision sensors that mimic human eyes. Their attractive attributes, such as high output…
▽ More
Event cameras, i.e., the Dynamic and Active-pixel Vision Sensor (DAVIS) ones, capture the intensity changes in the scene and generates a stream of events in an asynchronous fashion. The output rate of such cameras can reach up to 10 million events per second in high dynamic environments. DAVIS cameras use novel vision sensors that mimic human eyes. Their attractive attributes, such as high output rate, High Dynamic Range (HDR), and high pixel bandwidth, make them an ideal solution for applications that require high-frequency tracking. Moreover, applications that operate in challenging lighting scenarios can exploit the high HDR of event cameras, i.e., 140 dB compared to 60 dB of traditional cameras. In this paper, a novel asynchronous corner tracking method is proposed that uses both events and intensity images captured by a DAVIS camera. The Harris algorithm is used to extract features, i.e., frame-corners from keyframes, i.e., intensity images. Afterward, a matching algorithm is used to extract event-corners from the stream of events. Events are solely used to perform asynchronous tracking until the next keyframe is captured. Neighboring events, within a window size of 5x5 pixels around the event-corner, are used to calculate the velocity and direction of extracted event-corners by fitting the 2D planar using a randomized Hough transform algorithm. Experimental evaluation showed that our approach is able to update the location of the extracted corners up to 100 times during the blind time of traditional cameras, i.e., between two consecutive intensity images.
△ Less
Submitted 29 October, 2020;
originally announced October 2020.
-
Night vision obstacle detection and avoidance based on Bio-Inspired Vision Sensors
Authors:
Jawad N. Yasin,
Sherif A. S. Mohamed,
Mohammad-hashem Haghbayan,
Jukka Heikkonen,
Hannu Tenhunen,
Muhammad Mehboob Yasin,
Juha Plosila
Abstract:
Moving towards autonomy, unmanned vehicles rely heavily on state-of-the-art collision avoidance systems (CAS). However, the detection of obstacles especially during night-time is still a challenging task since the lighting conditions are not sufficient for traditional cameras to function properly. Therefore, we exploit the powerful attributes of event-based cameras to perform obstacle detection in…
▽ More
Moving towards autonomy, unmanned vehicles rely heavily on state-of-the-art collision avoidance systems (CAS). However, the detection of obstacles especially during night-time is still a challenging task since the lighting conditions are not sufficient for traditional cameras to function properly. Therefore, we exploit the powerful attributes of event-based cameras to perform obstacle detection in low lighting conditions. Event cameras trigger events asynchronously at high output temporal rate with high dynamic range of up to 120 $dB$. The algorithm filters background activity noise and extracts objects using robust Hough transform technique. The depth of each detected object is computed by triangulating 2D features extracted utilising LC-Harris. Finally, asynchronous adaptive collision avoidance (AACA) algorithm is applied for effective avoidance. Qualitative evaluation is compared using event-camera and traditional camera.
△ Less
Submitted 29 October, 2020;
originally announced October 2020.
-
Dynamic Resource-aware Corner Detection for Bio-inspired Vision Sensors
Authors:
Sherif A. S. Mohamed,
Jawad N. Yasin,
Mohammad-hashem Haghbayan,
Antonio Miele,
Jukka Heikkonen,
Hannu Tenhunen,
Juha Plosila
Abstract:
Event-based cameras are vision devices that transmit only brightness changes with low latency and ultra-low power consumption. Such characteristics make event-based cameras attractive in the field of localization and object tracking in resource-constrained systems. Since the number of generated events in such cameras is huge, the selection and filtering of the incoming events are beneficial from b…
▽ More
Event-based cameras are vision devices that transmit only brightness changes with low latency and ultra-low power consumption. Such characteristics make event-based cameras attractive in the field of localization and object tracking in resource-constrained systems. Since the number of generated events in such cameras is huge, the selection and filtering of the incoming events are beneficial from both increasing the accuracy of the features and reducing the computational load. In this paper, we present an algorithm to detect asynchronous corners from a stream of events in real-time on embedded systems. The algorithm is called the Three Layer Filtering-Harris or TLF-Harris algorithm. The algorithm is based on an events' filtering strategy whose purpose is 1) to increase the accuracy by deliberately eliminating some incoming events, i.e., noise, and 2) to improve the real-time performance of the system, i.e., preserving a constant throughput in terms of input events per second, by discarding unnecessary events with a limited accuracy loss. An approximation of the Harris algorithm, in turn, is used to exploit its high-quality detection capability with a low-complexity implementation to enable seamless real-time performance on embedded computing platforms. The proposed algorithm is capable of selecting the best corner candidate among neighbors and achieves an average execution time savings of 59 % compared with the conventional Harris score. Moreover, our approach outperforms the competing methods, such as eFAST, eHarris, and FA-Harris, in terms of real-time performance, and surpasses Arc* in terms of accuracy.
△ Less
Submitted 29 October, 2020;
originally announced October 2020.
-
Dynamic Formation Reshaping Based on Point Set Registration in a Swarm of Drones
Authors:
Jawad N. Yasin,
Sherif A. S. Mohamed,
Mohammad-Hashem Haghbayan,
Jukka Heikkonen,
Hannu Tenhunen,
Muhammad Mehboob Yasin,
Juha Plosila
Abstract:
This work focuses on the formation reshaping in an optimized manner in autonomous swarm of drones. Here, the two main problems are: 1) how to break and reshape the initial formation in an optimal manner, and 2) how to do such reformation while minimizing the overall deviation of the drones and the overall time, i.e., without slowing down. To address the first problem, we introduce a set of routine…
▽ More
This work focuses on the formation reshaping in an optimized manner in autonomous swarm of drones. Here, the two main problems are: 1) how to break and reshape the initial formation in an optimal manner, and 2) how to do such reformation while minimizing the overall deviation of the drones and the overall time, i.e., without slowing down. To address the first problem, we introduce a set of routines for the drones/agents to follow while reshaping to a secondary formation shape. And the second problem is resolved by utilizing the temperature function reduction technique, originally used in the point set registration process. The goal is to be able to dynamically reform the shape of multi-agent based swarm in near-optimal manner while going through narrow openings between, for instance obstacles, and then bringing the agents back to their original shape after passing through the narrow passage using point set registration technique.
△ Less
Submitted 29 October, 2020;
originally announced October 2020.
-
Precise positioning systems for Vehicular Ad-Hoc Networks
Authors:
Samir A. Elsagheer Mohamed,
A. Nasr,
Gufran Ahmad Ansari
Abstract:
Vehicular Ad Hoc Networks (VANET) is a very promising research venue that can offers many useful and critical applications including the safety applications. Most of these applications require that each vehicle knows precisely its current position in real time. GPS is the most common positioning technique for VANET. However, it is not accurate. Moreover, the GPS signals cannot be received in the t…
▽ More
Vehicular Ad Hoc Networks (VANET) is a very promising research venue that can offers many useful and critical applications including the safety applications. Most of these applications require that each vehicle knows precisely its current position in real time. GPS is the most common positioning technique for VANET. However, it is not accurate. Moreover, the GPS signals cannot be received in the tunnels, undergrounds, or near tall buildings. Thus, no positioning service can be obtained in these locations. Even if the Deferential GPS (DGPS) can provide high accuracy, but still no GPS converge in these locations. In this paper, we provide positioning techniques for VANET that can provide accurate positioning service in the areas where GPS signals are hindered by the obstacles. Experimental results show significant improvement in the accuracy. This allows when combined with DGPS the continuity of a precise positioning service that can be used by most of the VANET applications.
△ Less
Submitted 8 May, 2012;
originally announced May 2012.