-
Measurement of the effects of rough surfaces on Lamb waves propagation
Authors:
Damien Leduc,
Bruno Morvan,
Pascal Pareige,
Jean-Louis Izbicki
Abstract:
This work deals with the sensitivity to the plate roughness of Lamb waves. An experimental study is performed involving an air-coupling transducer system. Signal processing allows us to extract the Lamb waves characteristics: phase velocity and attenuation. Plate surface topographies are obtained by means of an optical surface profiler. The acoustic characteristics and the surface topographies are…
▽ More
This work deals with the sensitivity to the plate roughness of Lamb waves. An experimental study is performed involving an air-coupling transducer system. Signal processing allows us to extract the Lamb waves characteristics: phase velocity and attenuation. Plate surface topographies are obtained by means of an optical surface profiler. The acoustic characteristics and the surface topographies are finally linked.
△ Less
Submitted 19 April, 2023;
originally announced April 2023.
-
Underwater metamaterial absorber with impedance-matched composite
Authors:
Sichao Qu,
Nan Gao,
Alain Tinel,
Bruno Morvan,
Vicente Romero-García,
Jean-Philippe Groby,
Ping Sheng
Abstract:
By using a structured tungsten-polyurethane composite that is impedance-matched to water while simultaneously having a much slower longitudinal sound speed, we have theoretically designed, and experimentally realized, an underwater acoustic absorber exhibiting high absorption from 4 to 20 kHz, measured in a 5.6m times 3.6m water pool with the time-domain approach. The broadband functionality is ac…
▽ More
By using a structured tungsten-polyurethane composite that is impedance-matched to water while simultaneously having a much slower longitudinal sound speed, we have theoretically designed, and experimentally realized, an underwater acoustic absorber exhibiting high absorption from 4 to 20 kHz, measured in a 5.6m times 3.6m water pool with the time-domain approach. The broadband functionality is achieved by optimally engineering the distribution of the Fabry-Perot resonances, based on an integration scheme, to attain impedance matching over a broad frequency range. The average thickness of the integrated absorber, 8.9 mm, is in the deep subwavelength regime (~λ/42 at 4 kHz) and close to the causal minimum thickness of 8.2 mm that is evaluated from the simulated absorption spectrum. The structured composite represents a new type of acoustic metamaterials that has high acoustic energy density and promises broad underwater applications.
△ Less
Submitted 3 November, 2021;
originally announced November 2021.
-
Piezoelectric Phononic Plates: Retrieving the Frequency Band Structure via All-electric Experiments
Authors:
F. H. Chikh-Bled,
N. Kherraz,
R. Sainidou,
P. Rembert,
B. Morvan
Abstract:
We propose an experimental technique based on all-electric measurements to retrieve the frequency response of a one-dimensional piezoelectric phononic crystal plate, structured periodically with millimeter-scaled metallic strips on its two surfaces. The metallic electrodes, used for the excitation of Lamb-like guided modes in the plate, ensure at the same time control of their dispersion by means…
▽ More
We propose an experimental technique based on all-electric measurements to retrieve the frequency response of a one-dimensional piezoelectric phononic crystal plate, structured periodically with millimeter-scaled metallic strips on its two surfaces. The metallic electrodes, used for the excitation of Lamb-like guided modes in the plate, ensure at the same time control of their dispersion by means of externally loaded electric circuits that offer non-destructive tunability in the frequency response of these structures. Our results, in very good agreement with finite-element numerical predictions, reveal interesting symmetry aspects that are employed to analyze the frequency band structure of such crystals. More importantly, Lamb-like guided modes interact with electric-resonant bands induced by inductance loads on the plate, whose form and symmetry are discussed and analyzed in depth, showing unprecedented dispersion characteristics.
△ Less
Submitted 8 October, 2019; v1 submitted 27 May, 2019;
originally announced May 2019.
-
A frequency-preserving and time-invariant metamaterial-based nonlinear acoustic diode
Authors:
Antonio S. Gliozzi,
Marco Miniaci,
Anastasiia O. Krushynska,
Bruno Morvan,
Marco Scalerandi,
Nicola M. Pugno,
Federico Bosia
Abstract:
We present the realization of an acoustic diode or rectifier, exploiting symmetry-breaking nonlinear effects like harmonic generation and wave mixing and the filtering capabilities of metamaterials. The essential difference and advantage compared with previous acoustic diode realizations is that the present is simultaneously a time invariant, frequency preserving and switchable device. This allows…
▽ More
We present the realization of an acoustic diode or rectifier, exploiting symmetry-breaking nonlinear effects like harmonic generation and wave mixing and the filtering capabilities of metamaterials. The essential difference and advantage compared with previous acoustic diode realizations is that the present is simultaneously a time invariant, frequency preserving and switchable device. This allows its application also as an on-off or amplitude-tuning switch. We evaluate its properties by means of a numerical study and demonstrate its feasibility in a preliminary experimental realization. This work may provide new opportunities for the practical realization of structural components with one-way wave propagation properties.
△ Less
Submitted 24 October, 2018;
originally announced October 2018.
-
Observation of topologically protected helical edge modes in Kagome elastic plates
Authors:
M. Miniaci,
R. K. Pal,
B. Morvan,
M. Ruzzene
Abstract:
The investigation of topologically protected waves in classical media has opened unique opportunities to achieve exotic properties like one-way phonon transport, protection from backscattering and immunity to imperfections. Contrary to acoustic and electromagnetic domains, their observation in elastic solids has so far been elusive due to the presence of both shear and longitudinal modes and their…
▽ More
The investigation of topologically protected waves in classical media has opened unique opportunities to achieve exotic properties like one-way phonon transport, protection from backscattering and immunity to imperfections. Contrary to acoustic and electromagnetic domains, their observation in elastic solids has so far been elusive due to the presence of both shear and longitudinal modes and their modal conversion at interfaces and free surfaces.
Here we report the experimental observation of topologically protected helical edge waves in elastic media. The considered structure consists of an elastic plate patterned according to a Kagome architecture with an accidental degeneracy of two Dirac cones induced by drilling through holes. The careful breaking of symmetries couples the corresponding elastic modes which effectively emulates spin orbital coupling in the quantum spin Hall effect.
The results shed light on the topological properties of the proposed plate waveguide and opens avenues for the practical realization of compact, passive and cost-effective elastic topological waveguides.
△ Less
Submitted 8 November, 2017; v1 submitted 31 October, 2017;
originally announced October 2017.
-
Observation of a Lamb band gap in a polymer waveguide with periodic cross-like cavities
Authors:
M. Miniaci,
M. Mazzotti,
M. Radzieński,
N. Kherraz,
P. Kudela,
W. Ostachowicz,
B. Morvan,
F. Bosia,
N. M. Pugno
Abstract:
The quest for large and low frequency band gaps is one of the principal objectives pursued in a number of engineering applications, ranging from noise absorption to vibration control, to seismic wave abatement. For this purpose, a plethora of complex architectures (including multi-phase materials) and multi-physics approaches have been proposed in the past, often involving difficulties in their pr…
▽ More
The quest for large and low frequency band gaps is one of the principal objectives pursued in a number of engineering applications, ranging from noise absorption to vibration control, to seismic wave abatement. For this purpose, a plethora of complex architectures (including multi-phase materials) and multi-physics approaches have been proposed in the past, often involving difficulties in their practical realization.
To address this issue, in this work we propose an easy-to-manufacture design able to open large, low frequency complete Lamb band gaps exploiting a suitable arrangement of masses and stiffnesses produced by cavities in a monolithic material. The performance of the designed structure is evaluated by numerical simulations and confirmed by Scanning Laser Doppler Vibrometer (SLDV) measurements on an isotropic polyvinyl chloride plate in which a square ring region of cross-like cavities is fabricated. The full wave field reconstruction clearly confirms the ability of even a limited number of unit cell rows of the proposed design to efficiently attenuate Lamb waves. In addition, numerical simulations show that the structure allows to shift of the central frequency of the BG through geometrical modifications. The design may be of interest for applications in which large BGs at low frequencies are required.
△ Less
Submitted 31 October, 2017;
originally announced October 2017.
-
Proof of concept for an ultrasensitive meta-device to detect and localize nonlinear elastic sources
Authors:
Marco Miniaci,
Antonio S. Gliozzi,
Bruno Morvan,
Anastasiia Krushynska,
Federico Bosia,
Marco Scalerandi,
Nicola M. Pugno
Abstract:
The appearance of nonlinear effects in elastic wave propagation is one of the most reliable and sensitive indicators of the onset of material damage. However, these effects are usually very small and can be detected only using cumbersome digital signal processing techniques. Here, we propose and experimentally validate an alternative approach, using the filtering and focusing properties of elastic…
▽ More
The appearance of nonlinear effects in elastic wave propagation is one of the most reliable and sensitive indicators of the onset of material damage. However, these effects are usually very small and can be detected only using cumbersome digital signal processing techniques. Here, we propose and experimentally validate an alternative approach, using the filtering and focusing properties of elastic metamaterials to naturally select the higher harmonics generated by nonlinear effects and to increase their signal-to noise ratios, enabling the realization of time-reversal procedures for nonlinear elastic source detection. The proposed device demonstrates its potential as an efficient, compact, portable, passive apparatus for nonlinear elastic wave sensing and damage detection.
△ Less
Submitted 25 December, 2016;
originally announced January 2017.
-
The global surface composition of 67P/CG nucleus by Rosetta/VIRTIS. I) Prelanding mission phase
Authors:
Gianrico Filacchione,
Fabrizio Capaccioni,
Mauro Ciarniello,
Andrea Raponi,
Federico Tosi,
Maria Cristina De Sanctis,
Stephane Erard,
Dominique Bockelee Morvan,
Cedric Leyrat,
Gabriele Arnold,
Bernard Schmitt,
Eric Quirico,
Giuseppe Piccioni,
Alessandra Migliorini,
Maria Teresa Capria,
Ernesto Palomba,
Priscilla Cerroni,
Andrea Longobardo,
Antonella Barucci,
Sonia Fornasier,
Robert W. Carlson,
Ralf Jaumann,
Katrin Stephan,
Lyuba V. Moroz,
David Kappel
, et al. (5 additional authors not shown)
Abstract:
From August to November 2014 the Rosetta orbiter has performed an extensive observation campaign aimed at the characterization of 67P/CG nucleus properties and to the selection of the Philae landing site. The campaign led to the production of a global map of the illuminated portion of 67P/CG nucleus. During this prelanding phase the comet's heliocentric distance decreased from 3.62 to 2.93 AU whil…
▽ More
From August to November 2014 the Rosetta orbiter has performed an extensive observation campaign aimed at the characterization of 67P/CG nucleus properties and to the selection of the Philae landing site. The campaign led to the production of a global map of the illuminated portion of 67P/CG nucleus. During this prelanding phase the comet's heliocentric distance decreased from 3.62 to 2.93 AU while Rosetta was orbiting around the nucleus at distances between 100 to 10 km. VIRTIS-M, the Visible and InfraRed Thermal Imaging Spectrometer - Mapping channel (Coradini et al. 2007) onboard the orbiter, has acquired 0.25-5.1 micron hyperspectral data of the entire illuminated surface, e.g. the north hemisphere and the equatorial regions, with spatial resolution between 2.5 and 25 m/pixel. I/F spectra have been corrected for thermal emission removal in the 3.5-5.1 micron range and for surface's photometric response. The resulting reflectance spectra have been used to compute several Cometary Spectral Indicators (CSI): single scattering albedo at 0.55 micron, 0.5-0.8 micron and 1.0-2.5 micron spectral slopes, 3.2 micron organic material and 2.0 micron water ice band parameters (center, depth) with the aim to map their spatial distribution on the surface and to study their temporal variability as the nucleus moved towards the Sun. Indeed, throughout the investigated period, the nucleus surface shows a significant increase of the single scattering albedo along with a decrease of the 0.5-0.8 and 1.0-2.5 micron spectral slopes, indicating a flattening of the reflectance. We attribute the origin of this effect to the partial removal of the dust layer caused by the increased contribution of water sublimation to the gaseous activity as comet crossed the frost-line.
△ Less
Submitted 29 February, 2016;
originally announced February 2016.
