-
Non-local optical response of a multi-phased quantum material
Authors:
Ding Zhang,
Gururaj V. Naik
Abstract:
Light-matter interaction in quantum materials presents a new paradigm as light can tip the balance between many competing quantum many-body phases to result in new phenomena. Describing the optical response of such materials requires complex models. Here, we develop a non-local model to describe the optical response of a quantum material, 1T-TaS$_2$. 1T-TaS$_2$ is a nearly commensurate charge-dens…
▽ More
Light-matter interaction in quantum materials presents a new paradigm as light can tip the balance between many competing quantum many-body phases to result in new phenomena. Describing the optical response of such materials requires complex models. Here, we develop a non-local model to describe the optical response of a quantum material, 1T-TaS$_2$. 1T-TaS$_2$ is a nearly commensurate charge-density-wave material at room temperature. The competing stacking configurations of the charge domains in this layered material result in significant optical inhomogeneity that necessitates a non-local dielectric function. We experimentally measure the non-local optical response of 1T-TaS$_2$ films under various illumination intensities and validate our model. The non-local parameter extracted from our measurements sheds light on the competition between the two stacking configurations of 1T-TaS$_2$. Our technique of measuring non-local optical response serves as a quick, simple, and non-invasive method to probe the energy landscape of strong correlations in many such quantum materials.
△ Less
Submitted 25 May, 2024;
originally announced May 2024.
-
Sensing beyond the exceptional point for high detectivity
Authors:
Zhichao Li,
Ciril S. Prasad,
Xielin Wang,
Ding Zhang,
Gururaj V. Naik
Abstract:
Exceptional point (EP)-based optical sensors exhibit exceptional sensitivity but poor detectivity due to their acute sensitivity to perturbations such as noise. When the optical budget is limited as in applications on mobile platforms, high detectivity might be equally important as high sensitivity. In such scenarios, off-EP sensing is advantageous where a slight loss in sensitivity can lead to a…
▽ More
Exceptional point (EP)-based optical sensors exhibit exceptional sensitivity but poor detectivity due to their acute sensitivity to perturbations such as noise. When the optical budget is limited as in applications on mobile platforms, high detectivity might be equally important as high sensitivity. In such scenarios, off-EP sensing is advantageous where a slight loss in sensitivity can lead to a significant gain in detectivity. Here, we show that a passive parity-time symmetric plasmonic-photonic hybrid shows a peak in its detectivity off EP where the sensitivity is still very high-surpassing the sensitivities of equivalent fully-plasmonic and fully-photonic systems. We demonstrate the high detectivity of off-EP sensing of anti-mouse IgG protein using this plasmonic-photonic hybrid system. We report a sensitivity of 1.2 nm/nM while requiring a minimum optical budget of 1.3 nJ. Thus, non-Hermitian plasmonic-photonic hybrids could be the best class of nanophotonic sensors for real-world applications.
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
Large optical tunability from charge density waves in 1T-TaS$_2$ under incoherent illumination
Authors:
Weijian Li,
Gururaj V. Naik
Abstract:
Strongly correlated materials possess a complex energy landscape and host many interesting physical phenomena, including charge density waves (CDWs). CDWs have been observed and extensively studied in many materials since their first discovery in 1972. Yet, they present ample opportunities for discovery. Here, we report a large tunability in the optical response of a quasi-2D CDW material, 1T-TaS…
▽ More
Strongly correlated materials possess a complex energy landscape and host many interesting physical phenomena, including charge density waves (CDWs). CDWs have been observed and extensively studied in many materials since their first discovery in 1972. Yet, they present ample opportunities for discovery. Here, we report a large tunability in the optical response of a quasi-2D CDW material, 1T-TaS$_2$, upon incoherent light illumination at room temperature. We show that the observed tunability is a consequence of light-induced rearrangement of CDW stacking across the layers of 1T-TaS$_2$. Our model, based on this hypothesis, agrees reasonably well with experiments suggesting that the interdomain CDW interaction is a vital knob to control the phase of strongly correlated materials.
△ Less
Submitted 3 June, 2020;
originally announced June 2020.
-
Macroscopically Aligned Carbon Nanotubes as a Refractory Platform for Hyperbolic Thermal Emitters
Authors:
Weilu Gao,
Chloe F. Doiron,
Xinwei Li,
Junichiro Kono,
Gururaj V. Naik
Abstract:
Refractory nanophotonics, or nanophotonics at high temperatures, can revolutionize many applications, including data storage and waste heat recovery. In particular, nanophotonic devices made from hyperbolic materials are promising due to their nearly infinite photonic density of states (PDOS). However, it is challenging to achieve a prominent PDOS in existing refractory hyperbolic materials, espec…
▽ More
Refractory nanophotonics, or nanophotonics at high temperatures, can revolutionize many applications, including data storage and waste heat recovery. In particular, nanophotonic devices made from hyperbolic materials are promising due to their nearly infinite photonic density of states (PDOS). However, it is challenging to achieve a prominent PDOS in existing refractory hyperbolic materials, especially in a broad spectral range. Here, we demonstrate that macroscopic films and architectures of aligned carbon nanotubes work as excellent refractory hyperbolic materials. We found that aligned carbon nanotubes are thermally stable up to $1600^{\circ}$C and exhibit extreme anisotropy - metallic in one direction and insulating in the other two directions. Such extreme anisotropy makes this system a hyperbolic material with an exceptionally large PDOS over a broadband spectrum range (longer than $4.3μ$m) in the midinfrared, exhibiting strong resonances in deeply sub-wavelength-sized cavities. We observed polarized, spectrally selective thermal emission from aligned carbon nanotube films as well as indefinite cavities of aligned carbon nanotubes with volume as small as $\simλ^3/700$ operating at $700^{\circ}$C . These experiments suggest that aligned carbon nanotubes possess naturally large PDOS that leads to thermal photon densities enhanced by over two orders of magnitude, making them a promising refractory nanophotonics platform.
△ Less
Submitted 14 March, 2019;
originally announced March 2019.
-
Photon Upconversion with Hot Carriers in Plasmonic Systems
Authors:
Gururaj V. Naik,
Jennifer A. Dionne
Abstract:
We propose a novel scheme of photon upconversion based on harnessing the energy of plasmonic hot carriers. Low-energy photons excite hot electrons and hot holes in a plasmonic nanoparticle, which are then injected into an adjacent semiconductor quantum well where they radiatively recombine to emit a photon of higher energy. We theoretically study the proposed upconversion scheme using Fermi-liquid…
▽ More
We propose a novel scheme of photon upconversion based on harnessing the energy of plasmonic hot carriers. Low-energy photons excite hot electrons and hot holes in a plasmonic nanoparticle, which are then injected into an adjacent semiconductor quantum well where they radiatively recombine to emit a photon of higher energy. We theoretically study the proposed upconversion scheme using Fermi-liquid theory and determine the upconversion quantum efficiency to be as high as 25% in 5 nm silver nanocubes. This upconversion scheme is linear in its operation, does not require coherent illumination, offers spectral tunability, and is more efficient than conventional upconverters.
△ Less
Submitted 17 January, 2015;
originally announced January 2015.
-
Ultra-compact modulators based on novel CMOS-compatible plasmonic materials
Authors:
Viktoriia E. Babicheva,
Nathaniel Kinsey,
Gururaj V. Naik,
Andrei V. Lavrinenko,
Vladimir M. Shalaev,
Alexandra Boltasseva
Abstract:
We propose several planar layouts of ultra-compact plasmonic waveguide modulators that utilize alternative CMOS-compatible materials. The modulation is efficiently achieved by tuning the carrier concentration in a transparent conducting oxide layer, thereby tuning the waveguide either in plasmonic resonance or off-resonance. Resonance significantly increases the absorption coefficient of the plasm…
▽ More
We propose several planar layouts of ultra-compact plasmonic waveguide modulators that utilize alternative CMOS-compatible materials. The modulation is efficiently achieved by tuning the carrier concentration in a transparent conducting oxide layer, thereby tuning the waveguide either in plasmonic resonance or off-resonance. Resonance significantly increases the absorption coefficient of the plasmonic waveguide, which enables larger modulation depth. We show that an extinction ratio of 86 dB/um can be achieved, allowing for a 3-dB modulation depth in less than one micron at the telecommunication wavelength. Our multilayer structures can potentially be integrated with existing plasmonic and photonic waveguides as well as novel semiconductor-based hybrid photonic/electronic circuits.
△ Less
Submitted 13 August, 2013;
originally announced August 2013.
-
Plasmonic resonances in nanostructured transparent conducting oxide films
Authors:
Jongbum Kim,
Gururaj V. Naik,
Naresh K. Emani,
Alexandra Boltasseva
Abstract:
Transparent conducting oxides (TCO) are emerging as possible alternative constituent materials to replace noble metals such as silver and gold for low-loss plasmonic and metamaterial (MMs) applications in the near infrared (NIR) regime. The optical characteristics of TCOs have been studied to evaluate the functionalities and potential of these materials as metal substitutes in plasmonic and MM dev…
▽ More
Transparent conducting oxides (TCO) are emerging as possible alternative constituent materials to replace noble metals such as silver and gold for low-loss plasmonic and metamaterial (MMs) applications in the near infrared (NIR) regime. The optical characteristics of TCOs have been studied to evaluate the functionalities and potential of these materials as metal substitutes in plasmonic and MM devices, even apart from their usual use as electrode materials. However, patterning TCOs at the nanoscale, which is necessary for plasmonic and MM devices, is not well-studied. This paper investigates nanopatterning processes for TCOs, especially the lift-off technique with electron-beam lithography, and the realization of plasmonic nanostructures with TCOs. By employing the developed nanopatterning process, we fabricate 2D-periodic arrays of TCO nanodisks and characterize the material's plasmonic properties to evaluate the performance of TCOs as metal substitutes. Light-induced collective oscillations of the free electrons in the TCOs (bulk plasmons) and localized surface plasmon resonances are observed in the wavelength range from 1.6 to 2.1 micron. Well-defined resonance peaks are observed, which can be dramatically tuned by varying the amount of dopant and by thermally annealing the TCO nanodisks in nitrogen gas ambient while maintaining the low-loss properties.
△ Less
Submitted 26 November, 2012;
originally announced November 2012.
-
Negative refraction in Al:ZnO/ZnO metamaterial in the near-infrared
Authors:
Gururaj V. Naik,
Jingjing Liu,
Alexander V. Kildishev,
Vladimir M. Shalaev,
Alexandra Boltasseva
Abstract:
Noble metals such as gold and silver are the primary metallic building blocks of metamaterial devices. Making subwavelength-sized structural elements from these metals seriously limits the optical performance of a device, however, and complicates the manufacturing process of nearly all metamaterial devices in the optical wavelength range. As an alternative to noble metals, we propose to use heavil…
▽ More
Noble metals such as gold and silver are the primary metallic building blocks of metamaterial devices. Making subwavelength-sized structural elements from these metals seriously limits the optical performance of a device, however, and complicates the manufacturing process of nearly all metamaterial devices in the optical wavelength range. As an alternative to noble metals, we propose to use heavily-doped oxide semiconductors that offer both functional and fabrication advantages in the near-infrared. In this letter, we report an experimental demonstration of negative refraction in a near-infrared metamaterial device that is designed and fabricated using aluminum-doped zinc oxide.
△ Less
Submitted 14 October, 2011;
originally announced October 2011.
-
A comparative study of semiconductor-based plasmonic metamaterials
Authors:
Gururaj V. Naik,
Alexandra Boltasseva
Abstract:
Recent metamaterial (MM) research faces several problems when using metal-based plasmonic components as building blocks for MMs. The use of conventional metals for MMs is limited by several factors: metals such as gold and silver have high losses in the visible and near-infrared (NIR) ranges and very large negative real permittivity values, and in addition, their optical properties cannot be tuned…
▽ More
Recent metamaterial (MM) research faces several problems when using metal-based plasmonic components as building blocks for MMs. The use of conventional metals for MMs is limited by several factors: metals such as gold and silver have high losses in the visible and near-infrared (NIR) ranges and very large negative real permittivity values, and in addition, their optical properties cannot be tuned. These issues that put severe constraints on the device applications of MMs could be overcome if semiconductors are used as plasmonic materials instead of metals. Heavily doped, wide bandgap oxide semiconductors could exhibit both a small negative real permittivity and relatively small losses in the NIR. Heavily doped oxides of zinc and indium were already reported to be good, low loss alternatives to metals in the NIR range. Here, we consider these transparent conducting oxides (TCOs) as alternative plasmonic materials for many specific applications ranging from surface-plasmon-polariton waveguides to MMs with hyperbolic dispersion and epsilon-near-zero (ENZ) materials. We show that TCOs outperform conventional metals for ENZ and other MM-applications in the NIR.
△ Less
Submitted 7 August, 2011;
originally announced August 2011.
-
Semiconductors for Plasmonics and Metamaterials
Authors:
Gururaj V. Naik,
Alexandra Boltasseva
Abstract:
Plasmonics has conventionally been in the realm of metal-optics. However, conventional metals as plasmonic elements in the near-infrared (NIR) and visible spectral ranges suffer from problems such as large losses and incompatibility with semiconductor technology. Replacing metals with semiconductors can alleviate these problems if only semiconductors could exhibit negative real permittivity. Alumi…
▽ More
Plasmonics has conventionally been in the realm of metal-optics. However, conventional metals as plasmonic elements in the near-infrared (NIR) and visible spectral ranges suffer from problems such as large losses and incompatibility with semiconductor technology. Replacing metals with semiconductors can alleviate these problems if only semiconductors could exhibit negative real permittivity. Aluminum doped zinc oxide (AZO) is a low loss semiconductor that can show negative real permittivity in the NIR. A comparative assessment of AZO-based plasmonic devices such as superlens and hyperlens with their metal-based counterparts shows that AZO-based devices significantly outperform at a wavelength of 1.55 um. This provides a strong stimulus in turning to semiconductor plasmonics at the telecommunication wavelengths.
△ Less
Submitted 7 August, 2011;
originally announced August 2011.
-
Oxides and nitrides as alternative plasmonic materials in the optical range
Authors:
Gururaj V. Naik,
Jongbum Kim,
Alexandra Boltasseva
Abstract:
As alternatives to conventional metals, new plasmonic materials offer many advantages in the rapidly growing fields of plasmonics and metamaterials. These advantages include low intrinsic loss, semiconductor-based design, compatibility with standard nanofabrication processes, tunability, and others. Transparent conducting oxides such as Al:ZnO, Ga:ZnO and indium-tin-oxide (ITO) enable many high-pe…
▽ More
As alternatives to conventional metals, new plasmonic materials offer many advantages in the rapidly growing fields of plasmonics and metamaterials. These advantages include low intrinsic loss, semiconductor-based design, compatibility with standard nanofabrication processes, tunability, and others. Transparent conducting oxides such as Al:ZnO, Ga:ZnO and indium-tin-oxide (ITO) enable many high-performance metamaterial devices operating in the near-IR. Transition-metal nitrides such as TiN or ZrN can be substitutes for conventional metals in the visible frequencies. In this paper we provide the details of fabrication and characterization of these new materials and discuss their suitability for a number of metamaterial and plasmonic applications.
△ Less
Submitted 4 August, 2011;
originally announced August 2011.
-
Titanium nitride as a plasmonic material for visible wavelengths
Authors:
Gururaj V. Naik,
Jeremy L. Schroeder,
Timothy D. Sands,
Alexandra Boltasseva
Abstract:
The search for alternative plasmonic materials with improved optical properties over the traditional materials like silver and gold could ultimately lead to the long-awaited, real-life applications of plasmonic devices and metamaterials. In this work, we show that titanium nitride could perform as an alternative plasmonic material in the visible wavelength range. We evaluate the performances of va…
▽ More
The search for alternative plasmonic materials with improved optical properties over the traditional materials like silver and gold could ultimately lead to the long-awaited, real-life applications of plasmonic devices and metamaterials. In this work, we show that titanium nitride could perform as an alternative plasmonic material in the visible wavelength range. We evaluate the performances of various plasmonic and metamaterial structures with titanium nitride as a plasmonic component and show that transformation-optics devices and an important class of metamaterials with hyperbolic dispersion based on TiN could significantly outperform similar devices based on conventional metals in the visible wavelengths range.
△ Less
Submitted 26 November, 2010; v1 submitted 22 November, 2010;
originally announced November 2010.
-
Engineering the Photonic Density of States with metamaterials
Authors:
Z. Jacob*,
J. Y. Kim*,
G. V. Naik,
A. Boltasseva,
E. Narimanov. V. M. Shalaev
Abstract:
The photonic density of states (PDOS), like its' electronic coun- terpart, is one of the key physical quantities governing a variety of phenom- ena and hence PDOS manipulation is the route to new photonic devices. The PDOS is conventionally altered by exploiting the resonance within a device such as a microcavity or a bandgap structure like a photonic crystal. Here we show that nanostructured meta…
▽ More
The photonic density of states (PDOS), like its' electronic coun- terpart, is one of the key physical quantities governing a variety of phenom- ena and hence PDOS manipulation is the route to new photonic devices. The PDOS is conventionally altered by exploiting the resonance within a device such as a microcavity or a bandgap structure like a photonic crystal. Here we show that nanostructured metamaterials with hyperbolic dispersion can dramatically enhance the photonic density of states paving the way for metamaterial based PDOS engineering.
△ Less
Submitted 27 May, 2010;
originally announced May 2010.