-
Stabilization of vapor-rich bubble in ethanol/water mixtures and enhanced flow around the bubble
Authors:
Mizuki Kato,
Kyoko Namura,
Shinya Kawai,
Samir Kumar,
Kaoru Nakajima,
Motofumi Suzuki
Abstract:
This study investigates the behavior of microbubbles generated by the local heating of an ethanol/water mixture and the surrounding flow. The mixture is photothermally heated by focusing a continuous-wave laser on a FeSi$_2$ thin film. Although the liquid is not degassed, vapor-rich bubbles are stably generated in an ethanol concentration range of 1.5-50 wt% The vapor-rich bubbles absorb the air d…
▽ More
This study investigates the behavior of microbubbles generated by the local heating of an ethanol/water mixture and the surrounding flow. The mixture is photothermally heated by focusing a continuous-wave laser on a FeSi$_2$ thin film. Although the liquid is not degassed, vapor-rich bubbles are stably generated in an ethanol concentration range of 1.5-50 wt% The vapor-rich bubbles absorb the air dissolved in the surrounding liquid and exhale it continuously as air-rich bubbles $\sim$ 1 μm in diameter. For the same ethanol concentration range, the solutal-Marangoni force becomes dominant relative to the thermal-Marangoni force, and the air-rich bubbles are pushed away from the high-temperature region in the fluid toward the low-temperature region. Further, it was experimentally demonstrated that Marangoni forces do not significantly affect the surface of vapor-rich bubbles generated in ethanol/water mixtures, and they produce a flow from the high-temperature to the low-temperature region on the vapor-rich bubbles, which moves the exhaled air-rich bubbles away from the vapor-rich bubbles near the heat source. These effects prevent the vapor-rich and exhaled air-rich bubbles from recombining, thereby resulting in the long-term stability of the former. Moreover, the flow produced by the vapor-rich bubbles in the non-degassed 0-20 wt% ethanol/water mixture was stronger than that in degassed water. The maximum flow speed is achieved for an ethanol concentration of 5 wt%, which is 6-11 times higher than that when degassed water is utilized. The ethanol/water mixture produces vapor-rich bubbles without a degassing liquid and enhances the flow speed generated by the vapor-rich bubbles. This flow is expected to apply to driving and mixing microfluids.
△ Less
Submitted 19 May, 2024;
originally announced May 2024.
-
Microbubble Oscillation on Localized Heat Source Affected by Dissolved Gases in Water
Authors:
Nao Hiroshige,
Shunsuke Okai,
Xuanwei Zhang,
Samir Kumar,
Kyoko Namura,
Motofumi Suzuki
Abstract:
Recently, we demonstrated that the local heating of degassed water can generate water vapor microbubbles and induce a rapid flow around the bubble. Although flow generation involves the self-excited oscillation of bubbles at a local heating point, the conditions under which the bubbles oscillate are not fully understood. In this study, the dependence of microbubble size and oscillation frequency o…
▽ More
Recently, we demonstrated that the local heating of degassed water can generate water vapor microbubbles and induce a rapid flow around the bubble. Although flow generation involves the self-excited oscillation of bubbles at a local heating point, the conditions under which the bubbles oscillate are not fully understood. In this study, the dependence of microbubble size and oscillation frequency on the concentration of non-condensable gas in water was investigated. A continuous-wave laser beam was focused on a $β$-FeSi$_2$ thin film, and water was locally heated using the photothermal conversion properties of the film. The results showed that the lower the concentration of non-condensable gas dissolved in water, the smaller the bubble size and the higher the oscillation frequency. Furthermore, it was found that the bubbles oscillate when the amount of non-condensable gas absorbed by the bubbles, i.e., the bubble size, falls below a specific level. This study can provide a new understanding of the bubble oscillation mechanism and lead to the development of fluid control technology using bubbles.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
Effects of Marangoni and drag forces on the transition from vapor-rich to air-rich bubbles
Authors:
Kyoko Namura,
Takuya Iwasaki,
Kaoru Nakajima,
Motofumi Suzuki
Abstract:
In this study, we investigated the formation of air-rich microbubbles through local photothermal heating of non-degassed water. When non-degassed water is locally heated, vapor-rich bubbles are initially formed. These bubbles have a maximum radius of approximately 9 μm and stabilize while oscillating and exhaling air-rich bubbles. However, when the exhaled bubbles fuse and grow, they revert to vap…
▽ More
In this study, we investigated the formation of air-rich microbubbles through local photothermal heating of non-degassed water. When non-degassed water is locally heated, vapor-rich bubbles are initially formed. These bubbles have a maximum radius of approximately 9 μm and stabilize while oscillating and exhaling air-rich bubbles. However, when the exhaled bubbles fuse and grow, they revert to vapor-rich bubbles on the heat source. The vapor-rich bubbles are then exposed to a large amount of air, causing them to transition to air-rich bubbles. In this paper, the motion of the exhaled air-rich bubble is explained by the drag force owing to the flow and the Marangoni force owing to the temperature gradient acting on the bubble. Because the drag force is proportional to the bubble radius, and the Marangoni force is proportional to the square of the bubble radius, the larger the bubble, the stronger the effect of the Marangoni force. Thus, as the bubbles grow, they are drawn toward the heat source against the flow created by the vapor-rich bubbles. These results are useful for a better understanding of bubble growth and determining the conditions for the stable formation of vapor-rich bubbles in non-degassed water.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
Highly Stable and Reproducible Au Nanorod Arrays for Near-Infrared Optofluidic SERS sensor
Authors:
Samir Kumar,
Takao Fukuoka,
Kyoko Namura,
Motofumi Suzuki
Abstract:
Surface-enhanced Raman spectroscopy (SERS) is a sensitive vibrational spectroscopy technique that can enable fast and non-destructive detection of trace molecules. SERS substrates are critical for the advancement of the SERS application. By incorporating SERS substrates into microfluidic devices, the function of microfluidic devices can be extended, and an efficient on-site trace analysis platform…
▽ More
Surface-enhanced Raman spectroscopy (SERS) is a sensitive vibrational spectroscopy technique that can enable fast and non-destructive detection of trace molecules. SERS substrates are critical for the advancement of the SERS application. By incorporating SERS substrates into microfluidic devices, the function of microfluidic devices can be extended, and an efficient on-site trace analysis platform with powerful sensing capabilities can be realized. In this paper, we report the fabrication of a rapid and sensitive optofluidic SERS device using a unique Au nanorod array (AuNRA) with a plasmon resonance frequency in the near IR region. The highly stable and reproducible AuNRA were fabricated by a facile dynamic oblique angle deposition technique. A typical spectrum of 4,4-bipyridine (BPY) with enhanced peaks was observed within a few seconds after the injection of an aqueous solution BPY. Time-course measurements revealed an outstandingly quick response of SERS in this system. Using the AuNR microfluidic device, approximately 2x10-12 mole molecules were enough to produce detectable SERS signals. This work demonstrates rapid and sensitive chemical sensing using an optofluidic device equipped with a unique noble metal nanorod array.
△ Less
Submitted 14 September, 2020;
originally announced September 2020.
-
Multilayer Thin-Film Flake Dispersion Gel for Surface-Enhanced Raman Spectroscopy
Authors:
Samir Kumar,
Misa Kanagawa,
Kyoko Namura,
Takao Fukuoka,
Motofumi Suzuki
Abstract:
Ag nanorod arrays/dielectrics/mirror-structured multilayer thin-film are well known, highly sensitive surface-enhanced Raman scattering (SERS) substrates that enhance the Raman scattering cross-section by the interference of light. However, extracting biomarkers directly from human skin using these solid substrates is difficult. To overcome this problem, we propose a multilayer thin-film flake dis…
▽ More
Ag nanorod arrays/dielectrics/mirror-structured multilayer thin-film are well known, highly sensitive surface-enhanced Raman scattering (SERS) substrates that enhance the Raman scattering cross-section by the interference of light. However, extracting biomarkers directly from human skin using these solid substrates is difficult. To overcome this problem, we propose a multilayer thin-film flake dispersion gel by centrifugal mixing of the multilayer thin-film and hydroxyethyl cellulose (HEC) gel. The multilayer thin-film was prepared by serial bideposition using the dynamic oblique angle deposition technique. The mixing process was optimized to obtain flakes of ~10 μm so that the optical properties of the multilayer film can be preserved, and there is no risk of adverse effects on humans. The SERS features of the flakes dispersion gel were tested using 4, 4'-bipyridine (BPY). The BPY molecules diffused through the highly porous gel within a few seconds, generating significant SERS signals. The multilayer film flakes dispersion gel showed a SERS signal about 20 times better than the gel-dispersed Ag nanorod arrays without a multilayer film structure. These SERS active flakes dispersion gel can be used directly on the skin surface to collect body fluids from sweat, for biomarker sensing.
△ Less
Submitted 5 June, 2020;
originally announced June 2020.
-
Highly reproducible, large scale inkjet-printed Ag nanoparticles-ink SERS substrate
Authors:
Samir Kumar,
Kyoko Namura,
Daisuke Kumaki,
Shizuo Tokito,
Motofumi Suzuki
Abstract:
We report the fabrication of a low cost, and highly reproducible large scale surface-enhanced Raman spectroscopy substrate using an inkjet-printed Ag nanoparticle ink (AgNI). The AgNI SERS substrates were evaluated for SERS using BPY as a molecular probe. The printed AgNI dot arrays exhibit an excellent SERS performance and reproducibility. The batch to batch and spot to spot standard deviation va…
▽ More
We report the fabrication of a low cost, and highly reproducible large scale surface-enhanced Raman spectroscopy substrate using an inkjet-printed Ag nanoparticle ink (AgNI). The AgNI SERS substrates were evaluated for SERS using BPY as a molecular probe. The printed AgNI dot arrays exhibit an excellent SERS performance and reproducibility. The batch to batch and spot to spot standard deviation value of less than 10 percent was obtained. The results reveal the reproducibility of the AgNI SERS dot arrays and its potential application for SERS substrates.
△ Less
Submitted 22 May, 2020;
originally announced May 2020.
-
Water Droplet Bouncing on a non-Superhydrophobic Si Nanosprings
Authors:
Samir Kumar,
Kyoko Namura,
Motofumi Suzuki,
Jitendra P. Singh
Abstract:
Self-cleaning surfaces often make use of superhydrophobic coatings that repel water. Here, we report a hydrophobic Si nanospring surface, that effectively suppresses wetting by repelling water droplets. We investigated the dynamic response of Si nanospring arrays fabricated by glancing angle deposition. The vertical standing nanospring arrays were approximately 250 nm tall and 60 nm apart, which a…
▽ More
Self-cleaning surfaces often make use of superhydrophobic coatings that repel water. Here, we report a hydrophobic Si nanospring surface, that effectively suppresses wetting by repelling water droplets. We investigated the dynamic response of Si nanospring arrays fabricated by glancing angle deposition. The vertical standing nanospring arrays were approximately 250 nm tall and 60 nm apart, which allowed the droplets to rebound within a few milliseconds after contact. Amazingly, the morphology of the nanostructures influences the impact dynamics. The rebound time and coefficient of restitution were also found to be higher for Si nanosprings than vertical SI columns. It has been proposed that the restoring force of the Si nanosprings may be responsible for the water droplet rebound and can be explained by considering the droplet/nanospring surface as a coupled spring system. These nanospring surfaces may find applications in self-cleaning windows, liquid-repellent exteriors, glass panels of solar cells, and antifouling agents for roof tiling.
△ Less
Submitted 19 May, 2020;
originally announced May 2020.
-
Plasmonic Nanoslit Arrays Fabricated by Serial Bideposition: Optical and Surface-Enhanced Raman Scattering Study
Authors:
Samir Kumar,
Yusuke Doi,
Kyoko Namura,
Motofumi Suzuki
Abstract:
Recently, studies have been carried out on attempts to combine surface-enhanced Surface-enhanced Raman spectroscopy (SERS) substrates that can be based on either localized surface plasmon (LSP) or surface plasmon polaritons (SPP) structures. By combining these two systems, the drawbacks of each other can be solved. However, the manufacturing methods involved so far are sophisticated, labor-intensi…
▽ More
Recently, studies have been carried out on attempts to combine surface-enhanced Surface-enhanced Raman spectroscopy (SERS) substrates that can be based on either localized surface plasmon (LSP) or surface plasmon polaritons (SPP) structures. By combining these two systems, the drawbacks of each other can be solved. However, the manufacturing methods involved so far are sophisticated, labor-intensive, expensive, and also technically demanding. We propose a facile method for the fabrication of a flexible plasmonic nanoslit SERS sensor. We utilized the pattern on periodic optical disks (DVD-R) as a cheap substitute for printing the periodic pattern on PDMS with soft imprint lithography. Ag nanoslit (AgNS) was fabricated by serial bideposition using a dynamic oblique angle deposition (DOD) technique. The nanoslit structures were physically and optically characterized, and the experimental results were compared to the numerical simulation studies; Monte Carlo and the finite-difference time-domain (FDTD) simulation. The Ag nanoslit structure showed an excellent SERS enhancement, and its biosensing capability was demonstrated by the sensing of bilirubin.
△ Less
Submitted 25 February, 2020; v1 submitted 11 February, 2020;
originally announced February 2020.
-
GRAPE-6: The massively-parallel special-purpose computer for astrophysical particle simulation
Authors:
Junichiro Makino,
Toshiyuki Fukushige,
Masaki Koga,
Ken Namura
Abstract:
In this paper, we describe the architecture and performance of the GRAPE-6 system, a massively-parallel special-purpose computer for astrophysical $N$-body simulations. GRAPE-6 is the successor of GRAPE-4, which was completed in 1995 and achieved the theoretical peak speed of 1.08 Tflops. As was the case with GRAPE-4, the primary application of GRAPE-6 is simulation of collisional systems, thoug…
▽ More
In this paper, we describe the architecture and performance of the GRAPE-6 system, a massively-parallel special-purpose computer for astrophysical $N$-body simulations. GRAPE-6 is the successor of GRAPE-4, which was completed in 1995 and achieved the theoretical peak speed of 1.08 Tflops. As was the case with GRAPE-4, the primary application of GRAPE-6 is simulation of collisional systems, though it can be used for collisionless systems. The main differences between GRAPE-4 and GRAPE-6 are (a) The processor chip of GRAPE-6 integrates 6 force-calculation pipelines, compared to one pipeline of GRAPE-4 (which needed 3 clock cycles to calculate one interaction), (b) the clock speed is increased from 32 to 90 MHz, and (c) the total number of processor chips is increased from 1728 to 2048. These improvements resulted in the peak speed of 64 Tflops. We also discuss the design of the successor of GRAPE-6.
△ Less
Submitted 24 October, 2003;
originally announced October 2003.