-
Progenitor Constraint Incorporating Shell Merger: The Case of Supernova Remnant G359.0-0.9
Authors:
Kai Matsunaga,
Hiroyuki Uchida,
Rei Enokiya,
Toshiki Sato,
Ryo Sawada,
Hideyuki Umeda,
Takuto Narita,
Takeshi Go Tsuru
Abstract:
It is generally hard to put robust constraints on progenitor masses of supernovae (SNe) and remnants (SNRs) observationally, while they offer tantalizing clues to understanding explosion mechanisms and mass distribution. Our recent study suggests that ``shell merger'', which is theoretically expected for stellar evolution, can appreciably affect final yields of inter-mediate mass elements (IMEs; s…
▽ More
It is generally hard to put robust constraints on progenitor masses of supernovae (SNe) and remnants (SNRs) observationally, while they offer tantalizing clues to understanding explosion mechanisms and mass distribution. Our recent study suggests that ``shell merger'', which is theoretically expected for stellar evolution, can appreciably affect final yields of inter-mediate mass elements (IMEs; such as Ne, Mg, and Si). In light of this, here we report results of X-ray spectral analysis of a Galactic SNR G359.0-0.9, whose abundance pattern may possibly be anomalous according to a previous study. Our spectroscopy using all the available data taken with XMM-Newton reveals that this remnant is classified as Mg-rich SNRs because of its high Mg-to-Ne ratio (Z_Mg/Z_Ne=1.90+0.27-0.19; mass ratio 0.66+0.09-0.07) and conclude that the result cannot be explained without the shell merger. By comparing the observation with theoretical calculations, we prefer the so-called Ne-burning shell intrusion and in this case the progenitor mass M_ZAMS is likely <15M_sun. We confirm the result also by our new molecular line observations with the NRO-45 m telescope: G359.0-0.9 is located in the Scutum-Centaurus arm (2.66--2.94 kpc) and in this case the resultant total ejecta mass ~6.8M_sun is indeed consistent with the above estimate. Our method using mass ratios of IMEs presented in this paper will become useful to distinguish the type of the shell merger, the Ne-burning shell intrusion and the O-burning shell merger, for future SNR studies.
△ Less
Submitted 31 May, 2024;
originally announced May 2024.
-
Evaluation of the X-ray SOI pixel detector with the on-chip ADC
Authors:
Hiroumi Matsuhashi,
Kouichi Hagino,
Aya Bamba,
Ayaki Takeda,
Masataka Yukumoto,
Koji Mori,
Yusuke Nishioka,
Takeshi Go Tsuru,
Mizuki Uenomachi,
Tomonori Ikeda,
Masamune Matsuda,
Takuto Narita,
Hiromasa Suzuki,
Takaaki Tanaka,
Ikuo Kurachi,
Takayoshi Kohmura,
Yusuke Uchida,
Yasuo Arai,
Shoji Kawahito
Abstract:
XRPIX is the monolithic X-ray SOI (silicon-on-insulator) pixel detector, which has a time resolution better than 10 $\rmμ$s as well as a high detection efficiency for X-rays above 10 keV. XRPIX is planned to be installed on future X-ray satellites. To mount on satellites, it is essential that the ADC (analog-to-digital converter) be implemented on the detector because such peripheral circuits must…
▽ More
XRPIX is the monolithic X-ray SOI (silicon-on-insulator) pixel detector, which has a time resolution better than 10 $\rmμ$s as well as a high detection efficiency for X-rays above 10 keV. XRPIX is planned to be installed on future X-ray satellites. To mount on satellites, it is essential that the ADC (analog-to-digital converter) be implemented on the detector because such peripheral circuits must be as compact as possible to achieve a large imaging area in the limited space in satellites. Thus, we developed a new XRPIX device with the on-chip ADC, and evaluated its performances. As the results, the integral non-linearity was evaluated to be 6 LSB (least significant bit), equivalent to 36 eV. The differential non-linearity was less than 0.7 LSB, and input noise from the on-chip ADC was 5~$\rm{e^{-}}$. Also, we evaluated end-to-end performance including the sensor part as well as the on-chip ADC. As the results, energy resolution at 5.9 keV was 294 $\rm{\pm}$ 4 eV in full-width at half maximum for the best pixel.
△ Less
Submitted 10 May, 2024; v1 submitted 9 May, 2024;
originally announced May 2024.
-
Destratification in the Progenitor Interior of the Mg-rich Supernova Remnant N49B
Authors:
Toshiki Sato,
Kai Matsunaga,
Ryo Sawada,
Koh Takahashi,
Yudai Suwa,
John P. Hughes,
Hiroyuki Uchida,
Takuto Narita,
Hideyuki Umeda
Abstract:
Simulations of pre-supernova evolution suggest that some intense shell burning can be so active that, in extreme cases, it can merge with the outer shell, changing the initial conditions for the supernova explosion. However, such violent activity in the interior of stars has been difficult to confirm from observations of stars. Here we propose that the elemental composition of O-rich ejecta in sup…
▽ More
Simulations of pre-supernova evolution suggest that some intense shell burning can be so active that, in extreme cases, it can merge with the outer shell, changing the initial conditions for the supernova explosion. However, such violent activity in the interior of stars has been difficult to confirm from observations of stars. Here we propose that the elemental composition of O-rich ejecta in supernova remnants can be a tool to test for this kind of intense shell burning activity in the final stages of progenitor evolution. As an example, we discuss the origin of "Mg-rich" ejecta in the supernova remnant N49B. A high Mg/Ne mass ratio $\gtrsim 1$ suggests that the Ne- or O-burning shell has broken into or merged with the outer shell before the collapse. Such Mg-rich (or Ne-poor) ejecta has been identified in some other supernova remnants, supporting the idea that some destratification process, such as a shell merger, does indeed occur in the interiors of some massive stars, although they may not be the majority. Our results suggest that X-ray observations of O-rich ejecta in core-collapse supernova remnants will be a unique tool to probe the shell burning activity during the final stage of a massive star's interior.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Rapid spin changes around a magnetar fast radio burst
Authors:
Chin-Ping Hu,
Takuto Narita,
Teruaki Enoto,
George Younes,
Zorawar Wadiasingh,
Matthew G. Baring,
Wynn C. G. Ho,
Sebastien Guillot,
Paul S. Ray,
Tolga Guver,
Kaustubh Rajwade,
Zaven Arzoumanian,
Chryssa Kouveliotou,
Alice K. Harding,
Keith C. Gendreau
Abstract:
Magnetars are neutron stars with extremely high magnetic fields that exhibit various X-ray phenomena such as sporadic sub-second bursts, long-term persistent flux enhancements, and variable rates of rotation period change. In 2020, a fast radio burst (FRB), akin to cosmological millisecond-duration radio bursts, was detected from the Galactic magnetar SGR 1935+2154, confirming the long-suspected a…
▽ More
Magnetars are neutron stars with extremely high magnetic fields that exhibit various X-ray phenomena such as sporadic sub-second bursts, long-term persistent flux enhancements, and variable rates of rotation period change. In 2020, a fast radio burst (FRB), akin to cosmological millisecond-duration radio bursts, was detected from the Galactic magnetar SGR 1935+2154, confirming the long-suspected association between some FRBs and magnetars. However, the mechanism for FRB generation in magnetars remains unclear. Here we report the X-ray discovery of an unprecedented double glitch in SGR 1935+2154 within a time interval of approximately nine hours, bracketing an FRB that occurred on October 14, 2022. Each glitch involved a significant increase in the magnetar's spin frequency, being among the largest abrupt changes in neutron star rotation ever observed. Between the glitches, the magnetar exhibited a rapid spin-down phase, accompanied by a profound increase and subsequent decline in its persistent X-ray emission and burst rate. We postulate that a strong, ephemeral, magnetospheric wind provides the torque that rapidly slows the star's rotation. The trigger for the first glitch couples the star's crust to its magnetosphere, enhances the various X-ray signals, and spawns the wind that alters magnetospheric conditions that might produce the FRB.
△ Less
Submitted 14 February, 2024;
originally announced February 2024.
-
First-Principles Study of Recombination-Enhanced Migration of an Interstitial Magnesium in Gallium Nitride
Authors:
Yuansheng Zhao,
Kenji Shiraishi,
Tetsuo Narita,
Atsushi Oshiyama
Abstract:
The stable and metastable configurations of interstitial Mg in GaN and its migration energy barriers are studied from first-principles calculations. In addition to the conventional octahedral (O, global energy minimum) and tetrahedral (T, metastable) interstitial sites, we discover two new metastable interstitial complexes with formation energy lower than or close to that of T configuration but hi…
▽ More
The stable and metastable configurations of interstitial Mg in GaN and its migration energy barriers are studied from first-principles calculations. In addition to the conventional octahedral (O, global energy minimum) and tetrahedral (T, metastable) interstitial sites, we discover two new metastable interstitial complexes with formation energy lower than or close to that of T configuration but higher than O. Except for Mg at O site which only has +2 charge state, all other configurations also permit charge states +1 or 0. The minimum migration energy barrier for Mg$^{++}$ between O sites is found to be 1.95 eV. We further find that, when Fermi energy is close to the conduction band, the migration between O sites via metastable configurations occur through a recombination-enhanced mechanism in which the charge state changes from +2 at O site to 0 at metastable sites by consecutive capture of two electrons during the migration. This process greatly reduces the migration energy barrier to as low as 1.47 eV. This value is consistent with experiments, and we also discuss the role of intrinsic defects in the migration of Mg.
△ Less
Submitted 2 May, 2024; v1 submitted 9 February, 2024;
originally announced February 2024.
-
Progenitor constraint using line ratios of the CNO elements in supernova remnants
Authors:
Hiroyuki Uchida,
Takuto Narita
Abstract:
Unveiling the nature of progenitors is crucial for understanding the origin and the mechanism of core-collapse and thermonuclear supernovae (SNe). While several methods have been developed to derive stellar properties so far, many questions remain poorly understood. In this paper we demonstrate an observational approach to constrain progenitors of supernova remnants (SNRs) using abundances of carb…
▽ More
Unveiling the nature of progenitors is crucial for understanding the origin and the mechanism of core-collapse and thermonuclear supernovae (SNe). While several methods have been developed to derive stellar properties so far, many questions remain poorly understood. In this paper we demonstrate an observational approach to constrain progenitors of supernova remnants (SNRs) using abundances of carbon (C), nitrogen (N), and oxygen (O) in shock-heated circumstellar material (CSM). Our calculations with stellar evolution codes indicate that a total amount of these CNO elements will provide a more sensitive determination of the progenitor masses than the conventional method based on ejecta abundances. If the CNO lines (particularly those of C and N) are detected and measured their abundance ratios accurately, they can provide relatively robust constraint on the progenitor mass (and in some cases the rotation velocity) of SNRs. Since our method requires a better energy resolution and larger effective area in the soft X-ray band ($<1$~keV), XRISM launched on September 7, 2023 and next-generation microcalorimeter missions such as Athena, Lynx, LEM, and HUBS will bring a new insight into link between the progenitors and their remnants.
△ Less
Submitted 12 November, 2023;
originally announced November 2023.
-
Global deceleration and inward movements of X-ray knots and rims of RCW 103
Authors:
Hiromasa Suzuki,
Takaaki Tanaka,
Tsuyoshi Inoue,
Hiroyuki Uchida,
Takuto Narita
Abstract:
Kinematics of shocks, ejecta knots, and the compact remnant of a supernova remnant gives an insight into the nature of the progenitor and surrounding environment. We report on a proper motion measurement of X-ray knots and rims of the magnetar-hosting supernova remnant RCW 103. Chandra data obtained in three epochs, 1999, 2010, and 2016 are used. We find a global deceleration of 12 knots and rims…
▽ More
Kinematics of shocks, ejecta knots, and the compact remnant of a supernova remnant gives an insight into the nature of the progenitor and surrounding environment. We report on a proper motion measurement of X-ray knots and rims of the magnetar-hosting supernova remnant RCW 103. Chandra data obtained in three epochs, 1999, 2010, and 2016 are used. We find a global deceleration of 12 knots and rims both in northern and southern regions within the last $\sim 24$ yrs, even though its age is thought to be larger than 2 kyr. Some of them even changed their moving directions from outward ($\sim 1,000$ km s$^{-1}$) to inward ($\sim -2,000$ km s$^{-1}$). Our findings can be explained with a collision with a high-density medium both in the northern and southern edges of the remnant, although the remnant may still be expanding in the wind-blown cavity. The proper motion of the associated magnetar 1E161348$-$5055 is possibly detected with a velocity of $\approx 500$ km s$^{-1}$.
△ Less
Submitted 6 October, 2023;
originally announced October 2023.
-
Progenitor constraint with circumstellar material for the magnetar-hosting supernova remnant RCW 103
Authors:
Takuto Narita,
Hiroyuki Uchida,
Takashi Yoshida,
Takaaki Tanaka,
Takeshi Go Tsuru
Abstract:
Stellar winds blown out from massive stars ($\gtrsim 10M_{\odot}$) contain precious information on the progenitor itself, and in this context, the most important elements are carbon (C), nitrogen (N), and oxygen (O), which are produced by the CNO cycle in the H-burning layer. Although their X-ray fluorescence lines are expected to be detected in swept-up shock-heated circumstellar materials (CSMs)…
▽ More
Stellar winds blown out from massive stars ($\gtrsim 10M_{\odot}$) contain precious information on the progenitor itself, and in this context, the most important elements are carbon (C), nitrogen (N), and oxygen (O), which are produced by the CNO cycle in the H-burning layer. Although their X-ray fluorescence lines are expected to be detected in swept-up shock-heated circumstellar materials (CSMs) in supernova remnants (SNRs), particularly those of C and N have been difficult to detect so far. Here, we present a high-resolution spectroscopy of a young magnetar-hosting SNR RCW~103 with the Reflection Grating Spectrometer (RGS) onboard XMM-Newton and report on the detection of \ion{N}{7} Ly$α$ (0.50~keV) line for the first time. By comparing the obtained abundance ratio of N to O (N/O$=3.8 \pm{0.1}$) with various stellar evolution models, we show that the progenitor of RCW~103 is likely to have a low-mass (10--12~$M_{\odot}$) and medium-rotation velocities ($\lesssim 100~\rm{km~s^{-1}}$). The results also rule out the possibility of dynamo effects in massive ($\geq35~M_{\odot}$) stars as a formation mechanism of the associated magnetar 1E~161348$-$5055. Our method is useful for estimating various progenitor parameters for future missions with microcalorimeters such as XRISM and Athena.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
Multispeckle diffusing wave spectroscopy as a tool to study heterogeneous mechanical behavior in soft solids
Authors:
Jianzhu Ju,
Luca Cipelletti,
Stephan Zoellner,
Tetsuharu Narita,
Costantino Creton
Abstract:
Multiple speckle diffusing wave spectroscopy (MSDWS) can be applied to measure spatially heterogeneous mechanical behavior in soft solids, with high sensitivity to deformation and both spatial and temporal resolution. In this paper, we discuss the mathematical approach behind the quantification of the deformation rate from MSDWS data and provide guidelines for optimizing the selection of experimen…
▽ More
Multiple speckle diffusing wave spectroscopy (MSDWS) can be applied to measure spatially heterogeneous mechanical behavior in soft solids, with high sensitivity to deformation and both spatial and temporal resolution. In this paper, we discuss the mathematical approach behind the quantification of the deformation rate from MSDWS data and provide guidelines for optimizing the selection of experimental parameters in measurements. After validating the method in extensional tests on an elastomer, we provide an example of the potentiality of MSDWS by measuring the spatial distribution of the deformation rate during shear debonding of adhesive tapes. We quantitatively characterize the deformation rate distribution related to shearing and peeling under loading. A highly heterogeneous deformation rate distribution is observed, and time-dependent measurements reveal an increase in deformation localization hundreds of seconds before full debonding. This behavior, previously predicted by theory and simulation, is here demonstrated experimentally for the first time.
△ Less
Submitted 27 March, 2022;
originally announced March 2022.
-
Effects of lightning strokes on underground gravitational waves observatories
Authors:
T. Washimi,
T. Yokozawa,
M. Nakano,
T. Tanaka,
K. Kaihotsu,
Y. Mori,
T. Narita
Abstract:
For ground-based gravitational wave (GW) detectors, lightning strokes in the atmosphere are sources of environmental noise. Some GW detectors are built or planned in underground facilities, and knowledge of how lightning strokes affect them is of interest. In this paper, the lightning detection system in KAGRA is introduced, and the properties of the magnetic field measured inside and outside the…
▽ More
For ground-based gravitational wave (GW) detectors, lightning strokes in the atmosphere are sources of environmental noise. Some GW detectors are built or planned in underground facilities, and knowledge of how lightning strokes affect them is of interest. In this paper, the lightning detection system in KAGRA is introduced, and the properties of the magnetic field measured inside and outside the KAGRA tunnel are shown. One lightning-induced event in the GW channel of the KAGRA main interferometer is also shown. Finally, possible applications of lightning events for the GW experiments are discussed.
△ Less
Submitted 6 June, 2021; v1 submitted 11 March, 2021;
originally announced March 2021.
-
Construction of KAGRA: an Underground Gravitational Wave Observatory
Authors:
T. Akutsu,
M. Ando,
S. Araki,
A. Araya,
T. Arima,
N. Aritomi,
H. Asada,
Y. Aso,
S. Atsuta,
K. Awai,
L. Baiotti,
M. A. Barton,
D. Chen,
K. Cho,
K. Craig,
R. DeSalvo,
K. Doi,
K. Eda,
Y. Enomoto,
R. Flaminio,
S. Fujibayashi,
Y. Fujii,
M. -K. Fujimoto,
M. Fukushima,
T. Furuhata
, et al. (202 additional authors not shown)
Abstract:
Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferomet…
▽ More
Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferometer operation has been installed and the first test run was accomplished in March and April of 2016 with a rather simple configuration. The initial configuration of KAGRA is named {\it iKAGRA}. In this paper, we summarize the construction of KAGRA, including the study of the advantages and challenges of building an underground detector and the operation of the iKAGRA interferometer together with the geophysics interferometer that has been constructed in the same tunnel.
△ Less
Submitted 11 December, 2017; v1 submitted 30 November, 2017;
originally announced December 2017.
-
Fracture of dual crosslink gels with permanent and transient crosslinks
Authors:
Koichi Mayumi,
Jingyi Guo,
Tetsuharu Narita,
Chung Yuen,
Costantino Creton
Abstract:
We have carried out systematic fracture experiments in a single edge notch geometry over a range of stretch rates on dual crosslink hydrogels made from polyvinyl alcohol chains chemically crosslinked with glutaraldehyde and physically crosslinked with borate ions. If the energy release rate necessary for crack propagation was calculated conventionally, by using the work done to deform the sample t…
▽ More
We have carried out systematic fracture experiments in a single edge notch geometry over a range of stretch rates on dual crosslink hydrogels made from polyvinyl alcohol chains chemically crosslinked with glutaraldehyde and physically crosslinked with borate ions. If the energy release rate necessary for crack propagation was calculated conventionally, by using the work done to deform the sample to the critical value of stretch $λ_c$ where the crack propagates, we found that the fracture energy $Γ$ peaks around $λ\sim 0.001 s^{-1}$ before decreasing sharply with increasing stretch rate, in contradiction with the measurements of crack velocity. Combining simulations and experimental observations, we propose therefore here a general method to separate the energy dissipated during loading before crack propagation, from that which is dissipated during crack propagation. For fast loading rates (with a characteristic strain rate only slightly lower than the inverse of the typical breaking time of physical bonds), this improved method to estimate a local energy release rate $g_{local}$ at the onset of crack propagation, gives a value of the local fracture energy $Γ_{local}$ which is constant, consistent with the constant value of the crack propagation velocity measured experimentally. Using this improved method we also obtain the very interesting result that the dual crosslink gels have a much higher value of fracture energy at low loading rates than at high loading rates, contrary to the situation in classical chemically crosslinked elastic networks.
△ Less
Submitted 29 June, 2016;
originally announced June 2016.
-
GRAPE - A Balloon-Borne Gamma-Ray Polarimeter Experiment
Authors:
P. F. Bloser,
J. S. Legere,
J. R. Macri,
M. L. McConnell,
T. Narita,
J. M. Ryan
Abstract:
This paper reviews the development status of GRAPE (the Gamma-Ray Polarimeter Experiment), a hard X-ray Compton Polarimeter. The purpose of GRAPE is to measure the polarization of hard X-rays in the 50-300 keV energy range. We are particularly interested in X-rays that are emitted from solar flares and gamma-ray bursts (GRBs), although GRAPE could also be employed in the study of other astrophys…
▽ More
This paper reviews the development status of GRAPE (the Gamma-Ray Polarimeter Experiment), a hard X-ray Compton Polarimeter. The purpose of GRAPE is to measure the polarization of hard X-rays in the 50-300 keV energy range. We are particularly interested in X-rays that are emitted from solar flares and gamma-ray bursts (GRBs), although GRAPE could also be employed in the study of other astrophysical sources. Accurately measuring the polarization of the emitted radiation will lead to a better understating of both emission mechanisms and source geometries. The GRAPE design consists of an array of plastic scintillators surrounding a central high-Z crystal scintillator. The azimuthal distribution of photon scatters from the plastic array into the central calorimeter provides a measure of the polarization fraction and polarization angle of the incident radiation. The design of the detector provides sensitivity over a large field-of-view (>pi steradian). The design facilitates the fabrication of large area arrays with minimal deadspace. This paper presents the latest design concept and the most recent results from laboratory tests of a GRAPE science model.
△ Less
Submitted 14 August, 2005;
originally announced August 2005.
-
Developing a Compton Polarimeter to Measure Polarization of Hard X-Rays in the 50-300 keV Energy Range
Authors:
J. S. Legere,
P. Bloser,
J. R. Macri,
M. L. McConnell,
T. Narita,
J. M. Ryan
Abstract:
This paper discusses the latest progress in the development of GRAPE (Gamma-Ray Polarimeter Experiment), a hard X-ray Compton Polarimeter. The purpose of GRAPE is to measure the polarization of hard X-rays in the 50-300 keV energy range. We are particularly interested in X-rays that are emitted from solar flares and gamma-ray bursts (GRBs). Accurately measuring the polarization of the emitted ra…
▽ More
This paper discusses the latest progress in the development of GRAPE (Gamma-Ray Polarimeter Experiment), a hard X-ray Compton Polarimeter. The purpose of GRAPE is to measure the polarization of hard X-rays in the 50-300 keV energy range. We are particularly interested in X-rays that are emitted from solar flares and gamma-ray bursts (GRBs). Accurately measuring the polarization of the emitted radiation from these sources will lead, to a better understating of both the emission mechanisms and source geometries. The GRAPE design consists of an array of plastic scintillators surrounding a central high-Z crystal scintillator. We can monitor individual Compton scatters that occur in the plastics and determine whether the photon is photo absorbed by the high-Z crystal or not. A Compton scattered photon that is immediately photo absorbed by the high-Z crystal constitutes a valid event. These valid events provide us with the interaction locations of each incident photon and ultimately produces a modulation pattern for the Compton scattering of the polarized radiation. Comparing with Monte Carlo simulations of a 100% polarized beam, the level of polarization of the measured beam can then be determined. The complete array is mounted on a flat-panel multi-anode photomultiplier tube (MAPMT) that can measure the deposited energies resulting from the photon interactions. The design of the detector allows for a large field-of-view (>pi steradian), at the same time offering the ability to be close-packed with multiple modules in order to reduce deadspace. We plan to present in this paper the latest laboratory results obtained from GRAPE using partially polarized radiation sources.
△ Less
Submitted 14 August, 2005;
originally announced August 2005.
-
Multipixel characterization of imaging CZT detectors for hard X-ray imaging and spectroscopy
Authors:
S. V. Vadawale,
J. Hong,
J. Grindlay,
P. Williams,
M. Zhang,
E. Bellm,
T. Narita,
W. Craig,
B. Parker,
C. Stahle,
Feng Yan
Abstract:
We report our in-depth study of Cd-Zn-Te (CZT) crystals to determine an optimum pixel and guard band configuration for Hard X-ray imaging and spectroscopy. We tested 20x20x5mm crystals with 8x8 pixels on a 2.46mm pitch. We have studied different types of cathode / anode contacts and different pixel pad sizes. We present the measurements of leakage current as well as spectral response for each pi…
▽ More
We report our in-depth study of Cd-Zn-Te (CZT) crystals to determine an optimum pixel and guard band configuration for Hard X-ray imaging and spectroscopy. We tested 20x20x5mm crystals with 8x8 pixels on a 2.46mm pitch. We have studied different types of cathode / anode contacts and different pixel pad sizes. We present the measurements of leakage current as well as spectral response for each pixel. Our I-V measurement setup is custom designed to allow automated measurements of the I-V curves sequentially for all 64 pixels, whereas the radiation properties measurement setup allows for interchangeable crystals with the same XAIM3.2 ASIC readout from IDEAS. We have tested multiple crystals of each type, and each crystal in different positions to measure the variation between individual crystals and variation among the ASIC channels. We also compare the same crystals with and without a grounded guard band deposited on the crystal side walls vs. a floating guard band and compare results to simulations. This study was carried out to find the optimum CZT crystal configuration for prototype detectors for the proposed Black-Hole Finder mission, EXIST.
△ Less
Submitted 3 September, 2004;
originally announced September 2004.
-
Laboratory coded aperture imaging experiments: radial hole coded masks and depth-sensitive CZT detectors
Authors:
J. Hong,
S. V. Vadawale,
M. Zhang,
E. C. Bellm,
A. Yousef,
J. Noss,
J. E. Grindlay,
T. Narita
Abstract:
The proposed black-hole finder mission EXIST will consist of multiple wide-field hard X-ray coded-aperture telescopes. The high science goals set for the mission require innovations in telescope design. In particular, wide energy band coverage and fine angular resolution require relatively thick coded masks and thick detectors compared to their pixel size, which may introduce mask self-collimati…
▽ More
The proposed black-hole finder mission EXIST will consist of multiple wide-field hard X-ray coded-aperture telescopes. The high science goals set for the mission require innovations in telescope design. In particular, wide energy band coverage and fine angular resolution require relatively thick coded masks and thick detectors compared to their pixel size, which may introduce mask self-collimation and depth-induced image blurring with conventional design approaches. Previously we proposed relatively simple solutions to these potential problems: radial hole for mask selfcollimation and cathode depth sensing detector for image blurring. We have now performed laboratory experiments to explore the potential of these two techniques. The experimental results show that the radial hole mask greatly alleviates mask self-collimation and a ~1 mm resolution depth-sensitive detector scheme can be relatively easily achieved for the large scale required for EXIST.
△ Less
Submitted 31 August, 2004;
originally announced September 2004.
-
EXITE2 Observation of the SIGMA Source GRS 1227+025
Authors:
J. E. Grindlay,
P. F. Bloser,
Y. Chou,
T. Narita
Abstract:
We report the EXITE2 hard X-ray imaging of the sky around 3C273. A 2h observation on May 8, 1997, shows a $\sim$260 mCrab source detected at $\sim4σ$ in each of two bands (50-70 and 70-93 keV) and located $\sim$30' from 3C273 and consistent in position with the SIGMA source GRS1227+025. The EXITE2 spectrum is consistent with a power law with photon index 3 and large low energy absorption, as ind…
▽ More
We report the EXITE2 hard X-ray imaging of the sky around 3C273. A 2h observation on May 8, 1997, shows a $\sim$260 mCrab source detected at $\sim4σ$ in each of two bands (50-70 and 70-93 keV) and located $\sim$30' from 3C273 and consistent in position with the SIGMA source GRS1227+025. The EXITE2 spectrum is consistent with a power law with photon index 3 and large low energy absorption, as indicated by the GRANAT/SIGMA results. No source was detected in more sensitive followup EXITE2 observations in 2000 and 2001 with 3$σ$ upper limits of 190 and 65 mCrab, respectively. Comparison with the flux detected by SIGMA shows the source to be highly variable, suggesting it may be non-thermal and beamed and thus the first example of a ``type 2'' (absorbed) Blazar. Alternatively it might be (an unprecedented) very highly absorbed binary system undergoing accretion disk instability outbursts, possibly either a magnetic CV, or a black hole X-ray nova.
△ Less
Submitted 5 February, 2004;
originally announced February 2004.
-
Cathode depth sensing in CZT detectors
Authors:
J. Hong,
E. C. Bellm,
J. E. Grindlay,
T. Narita
Abstract:
Measuring the depth of interaction in thick Cadmium-Zinc-Telluride (CZT) detectors allows improved imaging and spectroscopy for hard X-ray imaging above 100 keV. The Energetic X-ray Imaging Survey Telescope (EXIST) will employ relatively thick (5 - 10 mm) CZT detectors, which are required to perform the broad energy-band sky survey. Interaction depth information is needed to correct events to th…
▽ More
Measuring the depth of interaction in thick Cadmium-Zinc-Telluride (CZT) detectors allows improved imaging and spectroscopy for hard X-ray imaging above 100 keV. The Energetic X-ray Imaging Survey Telescope (EXIST) will employ relatively thick (5 - 10 mm) CZT detectors, which are required to perform the broad energy-band sky survey. Interaction depth information is needed to correct events to the detector "focal plane" for correct imaging and can be used to improve the energy resolution of the detector at high energies by allowing event-based corrections for incomplete charge collection. Background rejection is also improved by allowing low energy events from the rear and sides of the detector to be rejected. We present experimental results of interaction depth sensing in a 5 mm thick pixellated Au-contact IMARAD CZT detector. The depth sensing was done by making simultaneous measurements of cathode and anode signals, where the interaction depth at a given energy is proportional to the ratio of cathode/anode signals. We demonstrate how a simple empirical formula describing the event distributions in the cathode/anode signal space can dramatically improve the energy resolution. We also estimate the energy and depth resolution of the detector as a function of the energy and the interaction depth. We also show a depth-sensing prototype system currently under development for EXIST in which cathode signals from 8, 16 or 32 crystals can be read-out by a small multi-channel ASIC board that is vertically edge-mounted on the cathode electrode along every second CZT crystal boundary. This allows CZT crystals to be tiled contiguously with minimum impact on throughput of incoming photons. The robust packaging is crucial in EXIST, which will employ very large area imaging CZT detector arrays.
△ Less
Submitted 16 October, 2003;
originally announced October 2003.
-
X-ray Dip Monitoring of XB 1916-053
Authors:
T. Narita,
J. E. Grindlay,
P. F. Bloser,
Y. Chou
Abstract:
We report on the long term monitoring of X-ray dips from the ultracompact low-mass X-ray binary (LMXB) XB 1916-053. Roughly one-month interval observations were carried out with the Rossi X-ray Timing Explorer (RXTE) during 1996, during which the source varied between dim, hard states and more luminous, soft states. The dip spectra and dip lightcurves were compared against both the broadband lum…
▽ More
We report on the long term monitoring of X-ray dips from the ultracompact low-mass X-ray binary (LMXB) XB 1916-053. Roughly one-month interval observations were carried out with the Rossi X-ray Timing Explorer (RXTE) during 1996, during which the source varied between dim, hard states and more luminous, soft states. The dip spectra and dip lightcurves were compared against both the broadband luminosity and the derived mass accretion rate Mdot. The dips spectra could be fitted by an absorbed blackbody plus cut-off power law non-dip spectral model, with additional absorption ranging from 0 to >100 x 10^22 cm^-2. The amount of additional blackbody absorption was found to vary with the source luminosity. Our results are consistent with an obscuration of the inner disk region by a partially ionized outer disk. The size of the corona, derived from the dip ingress times, was found to be ~10^9 cm. The corona size did not correlate with the coronal temperature, but seemed to increase when \Mdot also increased. We discuss our findings in the context of an evaporated accretion disk corona model and an ADAF-type model.
△ Less
Submitted 6 May, 2003;
originally announced May 2003.
-
Background Measurements from Balloon-Borne CZT Detectors
Authors:
Johnathan A Jenkins,
Tomohiko Narita,
Jonathan E. Grindlay,
Peter F. Bloser,
Carl Stahle,
Brad Parker,
Scott Barthelmy
Abstract:
We report detector characteristics and background measurements from two prototype imaging CZT detectors flown on a scientific balloon payload in May 2001. The detectors are both platinum-contact 10mm x 10mm x 5mm CZT crystals, each with a 4 $\times$ 4 array of pixels tiling the anode. One is made from IMARAD horizontal Bridgman CZT, the other from eV Products high-pressure Bridgman material. Bot…
▽ More
We report detector characteristics and background measurements from two prototype imaging CZT detectors flown on a scientific balloon payload in May 2001. The detectors are both platinum-contact 10mm x 10mm x 5mm CZT crystals, each with a 4 $\times$ 4 array of pixels tiling the anode. One is made from IMARAD horizontal Bridgman CZT, the other from eV Products high-pressure Bridgman material. Both detectors were mounted side-by-side in a flip-chip configuration and read out by a 32-channel IDE VA/TA ASIC preamp/shaper. We enclosed the detectors in the same 40deg field-of-view collimator (comprisinga graded passive shield and plastic scintillator) used in our previously-reported September 2000 flight. I-V curves for the detectors are diode-like, and we find that the platinum contacts adhere significantly better to the CZT surfaces than gold to previous detectors. The detectors and instrumentation performed well in a 20-hour balloon flight on 23/24 May 2001. Although we discovered a significant instrumental background component in flight, it was possible to measure and subtract this component from the spectra. The resulting IMARAD detector background spectrum (from 30 keV to ~450 keV) reaches ~5 x 10^{-3}$ counts/cm^2 -sec-keV at 100 keV and has a power-law index of ~2 at high energies. The eV Products detector has a similar spectrum, although there is more uncertainty in the energy scale because of calibration complications.
△ Less
Submitted 3 December, 2002; v1 submitted 24 November, 2002;
originally announced November 2002.
-
Partial rejuvenation of a colloidal glass
Authors:
F. Ozon,
T. Narita,
A. Knaebel,
G. Debrégeas,
P. Hébraud,
J. -P. Munch
Abstract:
We study the effect of shear on the aging dynamics of a colloidal suspension of synthetic clay particles. We find that a shear of amplitude $γ$ reduces the relaxation time measured just after the cessation of shear by a factor $\exp(-γ/γ_c)$, with $γ_c \sim 5%$, and is independent of the duration and the frequency of the shear. This simple law for the rejuvenation effect shows that the energy in…
▽ More
We study the effect of shear on the aging dynamics of a colloidal suspension of synthetic clay particles. We find that a shear of amplitude $γ$ reduces the relaxation time measured just after the cessation of shear by a factor $\exp(-γ/γ_c)$, with $γ_c \sim 5%$, and is independent of the duration and the frequency of the shear. This simple law for the rejuvenation effect shows that the energy involved in colloidal rearrangements is proportional to the shear amplitude, $γ$, rather than $γ^2$, leading to an Eyring-like description of the dynamics of our system.
△ Less
Submitted 7 July, 2003; v1 submitted 24 October, 2002;
originally announced October 2002.
-
Balloon Flight Background Measurement with Actively-Shielded Planar and Imaging CZT Detectors
Authors:
P. F. Bloser,
T. Narita,
J. A. Jenkins,
M. Perrin,
R. Murray,
J. E. Grindlay
Abstract:
We present results from the flight of two prototype CZT detectors on a scientific balloon payload in September 2000. The first detector, referred to as ``CZT1,'' consisted of a 10 mm x 10 mm x 2 mm CZT crystal with a single gold planar electrode readout. This detector was shielded by a combination of a passive collimator surrounded by plastic scintillator and a thick BGO crystal in the rear. The…
▽ More
We present results from the flight of two prototype CZT detectors on a scientific balloon payload in September 2000. The first detector, referred to as ``CZT1,'' consisted of a 10 mm x 10 mm x 2 mm CZT crystal with a single gold planar electrode readout. This detector was shielded by a combination of a passive collimator surrounded by plastic scintillator and a thick BGO crystal in the rear. The second detector, ``CZT2,'' comprised two 10 mm x 10 mm x 5 mm CZT crystals, one made of eV Products high pressure Bridgman material and the other of IMARAD horizontal Bridgman material, each fashioned with a 4 x 4 array of gold pixels on a 2.5 mm pitch. The pixellated detectors were flip-chip-mounted side by side and read out by a 32-channel ASIC. This detector was also shielded by a passive/plastic collimator in the front, but used only additional passive/plastic shielding in the rear. Both experiments were flown from Ft. Sumner, NM on September 19, 2000 on a 24 hour balloon flight. CZT1 recorded a non-vetoed background level at 100 keV of ~1e-3 cts/cm2/s/keV. Raising the BGO threshold from 50 keV to ~1 MeV produced only an 18% increase in this level. CZT2 recorded a background at 100 keV of ~4e-3 cts/cm2/s/keV in the eV Products detector and ~6e-3 cts/cm2/s/keV in the IMARAD detector. Both CZT1 and CZT2 spectra were in basic agreement with Monte Carlo simulations, though both recorded systematically higher count rates at high energy than predicted. No lines were observed, indicating that neutron capture reactions, at least those producing decay lines at a few 100 keV, are not significant components of the CZT background. Comparison of the CZT1 and CZT2 spectra indicates that passive/plastic shielding may provide adequately low background levels for many applications.
△ Less
Submitted 3 October, 2001;
originally announced October 2001.
-
Development of an XSPEC-Based Spectral Analysis System for the Coded-Aperture Hard X-ray Balloon Payload EXITE2
Authors:
P. F. Bloser,
Y. Chou,
J. E. Grindlay,
T. Narita,
G. Monnelly
Abstract:
We present the spectral analysis system for the second-generation Energetic X-ray Imaging Telescope Experiment (EXITE2) balloon payload. EXITE2 is an imaging hard X-ray telescope using a coded-aperture mask and a NaI/CsI phoswich detector operating in the energy range 20--600 keV. The instrument was flown on a high-altitude scientific balloon from Ft. Sumner, NM on 1997 May 7-8. We describe the…
▽ More
We present the spectral analysis system for the second-generation Energetic X-ray Imaging Telescope Experiment (EXITE2) balloon payload. EXITE2 is an imaging hard X-ray telescope using a coded-aperture mask and a NaI/CsI phoswich detector operating in the energy range 20--600 keV. The instrument was flown on a high-altitude scientific balloon from Ft. Sumner, NM on 1997 May 7-8. We describe the details of the EXITE2 spectral analysis system, with emphasis on those aspects peculiar to coded-aperture instruments. In particular, we have made our analysis compatible with the standard X-ray spectral fitting package XSPEC by generating a response matrix in the appropriate format including all the effects of a coded-aperture system. The use of XSPEC, which may be a first for coded-aperture data, permits great flexibility in the fitting of spectral models. The additional effects of our phoswich system, or any other detector-specific considerations, may be easily included as well. We test our spectral analysis using observations of the Crab Nebula, and find that the EXITE2 Crab spectrum is consistent with those recorded by previous instruments operating in this energy range.
△ Less
Submitted 7 September, 2001;
originally announced September 2001.
-
Construction and Testing of a Pixellated CZT Detector and Shield for a Hard X-ray Astronomy Balloon Flight
Authors:
P. F. Bloser,
T. Narita,
J. A. Jenkins,
J. E. Grindlay
Abstract:
We report on the construction and laboratory testing of pixellated CZT detectors mounted in a flip-chip, tiled fashion and read out by an ASIC, as required for proposed hard X-ray astronomy missions. Two 10 mm x 10 mm x 5 mm detectors were fabricated, one out of standard eV Products high-pressure Bridgman CZT and one out of IMARAD horizontal Bridgman CZT. Each was fashioned with a 4 x 4 array of…
▽ More
We report on the construction and laboratory testing of pixellated CZT detectors mounted in a flip-chip, tiled fashion and read out by an ASIC, as required for proposed hard X-ray astronomy missions. Two 10 mm x 10 mm x 5 mm detectors were fabricated, one out of standard eV Products high-pressure Bridgman CZT and one out of IMARAD horizontal Bridgman CZT. Each was fashioned with a 4 x 4 array of gold pixels on a 2.5 mm pitch with a surrounding guard ring. The detectors were mounted side by side on a carrier card, such that the pixel pitch was preserved, and read out by a 32-channel VA-TA ASIC from IDE AS Corp. controlled by a PC/104 single-board computer. A passive shield/collimator surrounded by plastic scintillator encloses the detectors on five sides and provides a ~40deg field of view. Thus this experiment tests key techniques required for future hard X-ray survey instruments. The experiment was taken to Ft Sumner, NM in May 2000 in preparation for a scientific balloon flight aboard the joint Harvard-MSFC EXITE2/HERO payload. Although we did not receive a flight opportunity, and are currently scheduled to fly in September 2000, we present our calibration data in the flight configuration together with data analysis techniques and simulations of the expected flight background spectrum.
△ Less
Submitted 17 August, 2000;
originally announced August 2000.
-
Development of Gold Contacted Flip-chip Detectors with IMARAD CZT
Authors:
T. Narita,
P. F. Bloser,
J. E. Grindlay,
J. A. Jenkins
Abstract:
We present initial results from our evaluation of a gold-contacted pixellated detector using cadmium zinc telluride substrate produced by IMARAD Imaging Systems. The Horizontal Bridgman (HB) grown crystals from IMARAD have been shown to produce high resolution photopeaks, but they are also seen to have large leakage current. Our previous tests with IMARAD CZT showed that the use of indium anodes…
▽ More
We present initial results from our evaluation of a gold-contacted pixellated detector using cadmium zinc telluride substrate produced by IMARAD Imaging Systems. The Horizontal Bridgman (HB) grown crystals from IMARAD have been shown to produce high resolution photopeaks, but they are also seen to have large leakage current. Our previous tests with IMARAD CZT showed that the use of indium anodes and gold cathode improved the resistivity compared to the standard indium-contacted detectors. We seek to test whether simple evaporated gold contacts alone could also reduce the leakage current and thus improve the spectral resolution, especially in the 10-100 keV energy range. We have fabricated several metal-semiconductor-metal (MSM) detectors with a 4x4 array of pixels on 10x10 mm substrates. Measurements of the detectors' leakage current, spectral response, and temperature sensitivity are presented and compared to IMARAD's ohmic contact detector and gold contact MSM detectors made of High Pressure Bridgman (HPB) material. Finally, we show preliminary results from a tiled flip-chip pixellated detector made using the IMARAD detectors.
△ Less
Submitted 17 August, 2000;
originally announced August 2000.
-
ASCA Observations of GX 354-0 and KS 1731-260
Authors:
T. Narita,
J. E. Grindlay,
D. Barret
Abstract:
We report on ASCA observations of the low mass X-ray binaries GX 354-0 and KS 1731-260. The spectrum of GX 354-0 is best described as a power-law or a Comptonized spectrum with tau ~ 5 and kT ~ 8 keV and a residual at ~6.5 keV. The residual may be a disk reflection or a Compton broadened Gaussian line from the hot inner ADAF-like coronal region. The absorption column density to the source is 2.9…
▽ More
We report on ASCA observations of the low mass X-ray binaries GX 354-0 and KS 1731-260. The spectrum of GX 354-0 is best described as a power-law or a Comptonized spectrum with tau ~ 5 and kT ~ 8 keV and a residual at ~6.5 keV. The residual may be a disk reflection or a Compton broadened Gaussian line from the hot inner ADAF-like coronal region. The absorption column density to the source is 2.9e22 cm^-2. No soft thermal component was detected. The spectrum from KS 1731-260 is softer and it is best fit with a two component model with a column density of 1.1e22 cm^-2. The likely interpretation is emission from a Comptonizing cloud with an optical depth tau>12 and either a neutron star or a disk blackbody emission. We discuss the likely location of the Comptonizing cloud for both sources within the context of several proposed emission models.
△ Less
Submitted 17 August, 2000;
originally announced August 2000.
-
Design and Testing of a Prototype Pixellated CZT Detector and Shield for Hard X-Ray Astronomy
Authors:
P. F. Bloser,
J. E. Grindlay,
T. Narita,
J. A. Jenkins
Abstract:
We report on the design and laboratory testing of a prototype imaging CZT detector intended for balloon flight testing in April 2000. The detector tests several key techniques needed for the construction of large-area CZT arrays, as required for proposed hard X-ray astronomy missions. Two 10 mm x 10 mm x 5 mm CZT detectors, each with a 4 x 4 array of 1.9 mm pixels on a 2.5 mm pitch, will be moun…
▽ More
We report on the design and laboratory testing of a prototype imaging CZT detector intended for balloon flight testing in April 2000. The detector tests several key techniques needed for the construction of large-area CZT arrays, as required for proposed hard X-ray astronomy missions. Two 10 mm x 10 mm x 5 mm CZT detectors, each with a 4 x 4 array of 1.9 mm pixels on a 2.5 mm pitch, will be mounted in a ``flip-chip'' fashion on a printed circuit board carrier card; the detectors will be placed 0.3 mm apart in a tiled configuration such that the pixel pitch is preserved across both crystals. One detector is eV Products high-pressure Bridgman CZT, and the other is IMARAD horizontal Bridgman material. Both detectors are read out by a 32-channel VA-TA ASIC controlled by a PC/104 single-board computer. A passive shield/collimator surrounded by plastic scintillator surrounds the detectors on five sides and provides a ~45 deg field of view. The background spectrum recorded by this instrument will be compared to that measured by a single-element CZT detector (10 mm x 10 mm x 2 mm high-pressure Bridgman material from eV Products) fitted with the same passive/plastic collimator but including an active BGO shield to the rear. This detector has been previously flown by us completely shielded by a passive cover. We describe preliminary laboratory results for the various systems, discuss initial background simulations, and describe our plans for balloon flight tests.
△ Less
Submitted 13 October, 1999;
originally announced October 1999.
-
CdZnTe Background Measurement at Balloon Altitudes
Authors:
P. Bloser,
J. Grindlay,
T. Narita,
F. Harrison
Abstract:
We report results of an experiment conducted in May 1997 to measure CdZnTe background and background reduction schemes in space flight conditions similar to those of proposed hard X-ray astrophysics missions. A 1 cm^2 CdZnTe detector was placed adjacent to a thick BGO anticoincidence shield and flown piggybacked onto the EXITE2 scientific balloon payload. The planar shield was designed to veto b…
▽ More
We report results of an experiment conducted in May 1997 to measure CdZnTe background and background reduction schemes in space flight conditions similar to those of proposed hard X-ray astrophysics missions. A 1 cm^2 CdZnTe detector was placed adjacent to a thick BGO anticoincidence shield and flown piggybacked onto the EXITE2 scientific balloon payload. The planar shield was designed to veto background countsproduced by local gamma-ray production in passive material and neutron interactions in the detector. The CdZnTe and BGO were partially surrounded by a Pb-Sn-Cu shield to approximate the grammage of an X-ray collimator, although the field of view was still ~2 pi sr. At an altitude of 127000 feet we find a reduction in background by a factor of 6 at 100 keV. The non-vetoed background is 9 X 10^{-4} cts /cm^2-sec-keV at 100 keV, about a factor of 2 higher than that of the collimated (4.5 deg FWHM) EXITE2 phoswich detector. We compare our recorded spectrum with that expected from simulations using GEANT and find agreement within a factor of 2 between 30 and 300 keV. We also compare our results with those of previous experiments using passive lead and active NaI shields, and discuss possible active shielding schemes in future astronomy missions employing large arrays of CdZnTe detectors.
△ Less
Submitted 21 August, 1998;
originally announced August 1998.
-
Development of Prototype Pixellated PIN CdZnTe Detectors
Authors:
T. Narita,
P. Bloser,
J. Grindlay,
R. Sudharsanan,
C. Reiche,
C. Stenstrom
Abstract:
We report initial results from the design and evaluation of two pixellated PIN Cadmium Zinc Telluride detectors and an ASIC-based readout system. The prototype imaging PIN detectors consist of 4X4 1.5 mm square indium anode contacts with 0.2 mm spacing and a solid cathode plane on 10X10 mm CdZnTe substrates of thickness 2 mm and 5 mm. The detector readout system, based on low noise preamplifier…
▽ More
We report initial results from the design and evaluation of two pixellated PIN Cadmium Zinc Telluride detectors and an ASIC-based readout system. The prototype imaging PIN detectors consist of 4X4 1.5 mm square indium anode contacts with 0.2 mm spacing and a solid cathode plane on 10X10 mm CdZnTe substrates of thickness 2 mm and 5 mm. The detector readout system, based on low noise preamplifier ASICs, allows for parallel readout of all channels upon cathode trigger. This prototype is under development for use in future astrophysical hard X-ray imagers with 10-600 keV energy response. Measurements of the detector uniformity, spatial resolution, and spectral resolution will be discussed and compared with a similar pixellated MSM detector. Finally, a prototype design for a large imaging array is outlined.
△ Less
Submitted 12 June, 1998;
originally announced June 1998.
-
Prototype Imaging Cd-Zn-Te Array Detector
Authors:
P. F. Bloser,
T. Narita,
J. E. Grindlay,
K. Shah
Abstract:
We describe initial results of our program to develop and test Cd-Zn-Te (CZT) detectors with a pixellated array readout. Our primary interest is in the development of relatively thick CZT detectors for use in astrophysical coded aperture telescopes with response extending over the energy range $\sim 10-600$ keV. The coded aperture imaging configuration requires only relatively large area pixels…
▽ More
We describe initial results of our program to develop and test Cd-Zn-Te (CZT) detectors with a pixellated array readout. Our primary interest is in the development of relatively thick CZT detectors for use in astrophysical coded aperture telescopes with response extending over the energy range $\sim 10-600$ keV. The coded aperture imaging configuration requires only relatively large area pixels (1-3 mm), whereas the desired high energy response requires detector thicknesses of at least 3-5 mm. We have developed a prototype detector employing a 10 x 10 x 5 mm CZT substrate and 4 x 4 pixel (1.5 mm each) readout with gold metal contacts for the pixels and continuous gold contact for the bias on the opposite detector face. This MSM contact configuration was fabricated by RMD and tested at Harvard for uniformity, efficiency and spatial as well as spectral resolution. We have developed an ASIC readout (IDE-VA-1) and analysis system and report results, including $\sim 4$% (FWHM) energy resolution at 60 keV. A prototype design for a full imaging detector array is discussed.
△ Less
Submitted 15 January, 1998;
originally announced January 1998.
-
A Search for Very High Energy Neutrinos from Active Galactic Nuclei
Authors:
J. W. Bolesta,
H. Bradner,
U. Camerini,
J. Clem,
S. T. Dye,
J. George,
P. W. Gorham,
P. K. F. Grieder,
J. Hauptman,
T. Hayashino,
M. Jaworski,
T. Kitamura,
S. Kondo,
J. G. Learned,
R. March,
T. Matsumoto,
S. Matsuno,
K. Mauritz,
P. Minkowski,
T. Narita,
D. J. O'Connor,
Y. Ohashi,
A. Okada,
V. Peterson,
V. J. Stenger
, et al. (5 additional authors not shown)
Abstract:
We report the results of a search for neutrino-induced particle cascades using a deep ocean water Cherenkov detector. The effective mass of the detector, a string of seven 40 cm diameter photomultipliers at 5.2 m spacing, is found through simulation analysis to be surprisingly large: greater than 1 megaton of water at incident neutrino energies of 1 PeV. We find no evidence for neutrino-induced…
▽ More
We report the results of a search for neutrino-induced particle cascades using a deep ocean water Cherenkov detector. The effective mass of the detector, a string of seven 40 cm diameter photomultipliers at 5.2 m spacing, is found through simulation analysis to be surprisingly large: greater than 1 megaton of water at incident neutrino energies of 1 PeV. We find no evidence for neutrino-induced cascades in 18.6 hours of observation. Although the limit implied by this observation is the strongest yet for predictions of active galatic nuclei (AGN) neutrinos at energies above 100 TeV, perhaps the more intriguing result is that the power of these techniques can be exploited to test these AGN models in a relatively short time.
△ Less
Submitted 27 May, 1997; v1 submitted 24 May, 1997;
originally announced May 1997.