Showing 1–49 of 49 results for author: Oriunno, M

Searching for Prompt and Long-Lived Dark Photons in Electro-Produced $e^+e^-$ Pairs with the Heavy Photon Search Experiment at JLab

Authors: P. H. Adrian, N. A. Baltzell, M. Battaglieri, M. Bondi, S. Boyarinov, C. Bravo, S. Bueltmann, P. Butti, V. D. Burkert, D. Calvo, T. Cao, M. Carpinelli, A. Celentano, G. Charles, L. Colaneri, W. Cooper, C. Cuevas, A. D'Angelo, N. Dashyan, M. De Napoli, R. De Vita, A. Deur, M. Diamond, R. Dupre, H. Egiyan , et al. (59 additional authors not shown)

Abstract: The Heavy Photon Search experiment (HPS) at the Thomas Jefferson National Accelerator Facility searches for electro-produced dark photons. We report results from the 2016 Engineering Run consisting of 10608/nb of data for both the prompt and displaced vertex searches. A search for a prompt resonance in the $e^+e^-$ invariant mass distribution between 39 and 179 MeV showed no evidence of dark photo… ▽ More The Heavy Photon Search experiment (HPS) at the Thomas Jefferson National Accelerator Facility searches for electro-produced dark photons. We report results from the 2016 Engineering Run consisting of 10608/nb of data for both the prompt and displaced vertex searches. A search for a prompt resonance in the $e^+e^-$ invariant mass distribution between 39 and 179 MeV showed no evidence of dark photons above the large QED background, limiting the coupling of εいぷしろん^2 {\geq} 10^-5, in agreement with previous searches. The search for displaced vertices showed no evidence of excess signal over background in the masses between 60 and 150 MeV, but had insufficient luminosity to limit canonical heavy photon production. This is the first displaced vertex search result published by HPS. HPS has taken high-luminosity data runs in 2019 and 2021 that will explore new dark photon phase space. △ Less

Submitted 12 July, 2023; v1 submitted 20 December, 2022; originally announced December 2022.

Comments: 28 pages, 46 figures

Report number: JLAB-PHY-23-3738

C$^3$ Demonstration Research and Development Plan

Authors: Emilio A. Nanni, Martin Breidenbach, Caterina Vernieri, Sergey Belomestnykh, Pushpalatha Bhat, Sergei Nagaitsev, Mei Bai, William Berg, Tim Barklow, John Byrd, Ankur Dhar, Ram C. Dhuley, Chris Doss, Joseph Duris, Auralee Edelen, Claudio Emma, Josef Frisch, Annika Gabriel, Spencer Gessner, Carsten Hast, Chunguang Jing, Arkadiy Klebaner, Anatoly K. Krasnykh, John Lewellen, Matthias Liepe , et al. (25 additional authors not shown)

Abstract: C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced stat… ▽ More C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C$^3$ is the main linac. This white paper presents the staged approach towards a facility to demonstrate C$^3$ technology with both Direct (source and main linac) and Parallel (beam delivery, damping ring, ancillary component) R&D. The white paper also includes discussion on the approach for technology industrialization, related HEP R&D activities that are enabled by C$^3$ R&D, infrastructure requirements and siting options. △ Less

Submitted 6 July, 2022; v1 submitted 17 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Report number: SLAC-PUB-17660

Characterisation of the dip-bump structure observed in proton-proton elastic scattering at $\sqrt s$ = 8 TeV

Authors: The TOTEM Collaboration, G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, C. Baldenegro Barrera, V. Berardi, M. Berretti, V. Borchsh, E. Bossini, U. Bottigli, M. Bozzo, H. Burkhardt, F. S. Cafagna, M. G. Catanesi, M. Csanád, T. Csörgő, M. Deile, F. De Leonardis, M. Doubek, D. Druzhkin, K. Eggert, V. Eremin, F. Ferro , et al. (63 additional authors not shown)

Abstract: The TOTEM collaboration at the CERN LHC has measured the differential cross-section of elastic proton-proton scattering at $\sqrt{s} = 8\ {\rm TeV}$ in the squared four-momentum transfer range $0.2\ {\rm GeV^{2}} < |t| < 1.9\ {\rm GeV^{2}}$. This interval includes the structure with a diffractive minimum ("dip") and a secondary maximum ("bump") that has also been observed at all other LHC energies… ▽ More The TOTEM collaboration at the CERN LHC has measured the differential cross-section of elastic proton-proton scattering at $\sqrt{s} = 8\ {\rm TeV}$ in the squared four-momentum transfer range $0.2\ {\rm GeV^{2}} < |t| < 1.9\ {\rm GeV^{2}}$. This interval includes the structure with a diffractive minimum ("dip") and a secondary maximum ("bump") that has also been observed at all other LHC energies, where measurements were made. A detailed characterisation of this structure for $\sqrt{s} = 8\ {\rm TeV}$ yields the positions, $|t|_{\rm dip} = (0.521 \pm 0.007)\ {\rm GeV^2}$ and $|t|_{\rm bump} = (0.695 \pm 0.026)\ {\rm GeV^2}$, as well as the cross-section values, ${{\rm d}σしぐま/{\rm d} t}_{\rm dip} = (15.1 \pm 2.5)\ {\rm{μみゅーb/GeV^2}}$ and ${{\rm d}σしぐま/{\rm d} t}_{\rm bump} = (29.7 \pm 1.8)\ {\rm{μみゅーb/GeV^2}}$, for the dip and the bump, respectively. △ Less

Submitted 23 November, 2021; originally announced November 2021.

Report number: CERN-EP-2021-242

C$^3$: A "Cool" Route to the Higgs Boson and Beyond

Authors: Mei Bai, Tim Barklow, Rainer Bartoldus, Martin Breidenbach, Philippe Grenier, Zhirong Huang, Michael Kagan, John Lewellen, Zenghai Li, Thomas W. Markiewicz, Emilio A. Nanni, Mamdouh Nasr, Cho-Kuen Ng, Marco Oriunno, Michael E. Peskin, Thomas G. Rizzo, James Rosenzweig, Ariel G. Schwartzman, Vladimir Shiltsev, Evgenya Simakov, Bruno Spataro, Dong Su, Sami Tantawi, Caterina Vernieri, Glen White , et al. (1 additional authors not shown)

Abstract: We present a proposal for a cold copper distributed coupling accelerator that can provide a rapid route to precision Higgs physics with a compact 8 km footprint. This proposal is based on recent advances that increase the efficiency and operating gradient of a normal conducting accelerator. This technology also provides an $e^{+}e^{-}$ collider path to physics at multi-TeV energies. In this articl… ▽ More We present a proposal for a cold copper distributed coupling accelerator that can provide a rapid route to precision Higgs physics with a compact 8 km footprint. This proposal is based on recent advances that increase the efficiency and operating gradient of a normal conducting accelerator. This technology also provides an $e^{+}e^{-}$ collider path to physics at multi-TeV energies. In this article, we describe our vision for this technology and the near-term R&D program needed to pursue it. △ Less

Submitted 27 October, 2021; originally announced October 2021.

Comments: 34 pages, 8 figures, Contribution to Snowmass 2021. The editors can be contacted at the following addresses: mib@slac.stanford.edu, nanni@slac.stanford.edu, mpeskin@slac.stanford.edu, caterina@slac.stanford.edu

Report number: SLAC-PUB-17629

Comparison of $pp$ and $p \bar{p}$ differential elastic cross sections and observation of the exchange of a colorless $C$-odd gluonic compound

Authors: V. M. Abazov, B. Abbott, B. S. Acharya, M. Adams, T. Adams, J. P. Agnew, G. D. Alexeev, G. Alkhazov, A. Alton, G. A. Alves, G. Antchev, A. Askew, P. Aspell, A. C. S. Assis Jesus, I. Atanassov, S. Atkins, K. Augsten, V. Aushev, Y. Aushev, V. Avati, C. Avila, F. Badaud, J. Baechler, L. Bagby, C. Baldenegro Barrera , et al. (451 additional authors not shown)

Abstract: We describe an analysis comparing the $p\bar{p}$ elastic cross section as measured by the D0 Collaboration at a center-of-mass energy of 1.96 TeV to that in $pp$ collisions as measured by the TOTEM Collaboration at 2.76, 7, 8, and 13 TeV using a model-independent approach. The TOTEM cross sections extrapolated to a center-of-mass energy of $\sqrt{s} =$ 1.96 TeV are compared with the D0 measurement… ▽ More We describe an analysis comparing the $p\bar{p}$ elastic cross section as measured by the D0 Collaboration at a center-of-mass energy of 1.96 TeV to that in $pp$ collisions as measured by the TOTEM Collaboration at 2.76, 7, 8, and 13 TeV using a model-independent approach. The TOTEM cross sections extrapolated to a center-of-mass energy of $\sqrt{s} =$ 1.96 TeV are compared with the D0 measurement in the region of the diffractive minimum and the second maximum of the $pp$ cross section. The two data sets disagree at the 3.4$σしぐま$ level and thus provide evidence for the $t$-channel exchange of a colorless, $C$-odd gluonic compound, also known as the odderon. We combine these results with a TOTEM analysis of the same $C$-odd exchange based on the total cross section and the ratio of the real to imaginary parts of the forward elastic scattering amplitude in $pp$ scattering. The combined significance of these results is larger than 5$σしぐま$ and is interpreted as the first observation of the exchange of a colorless, $C$-odd gluonic compound. △ Less

Submitted 25 June, 2021; v1 submitted 7 December, 2020; originally announced December 2020.

Comments: D0 and TOTEM Collaborations

Journal ref: Phys. Rev. Lett. 127, 062003 (2021)

Experimental demonstration of particle acceleration with normal conducting accelerating structure at cryogenic temperature

Authors: Mamdouh Nasr, Emilio Nanni, Martin Breidenbach, Stephen Weathersby, Marco Oriunno, Sami Tantawi

Abstract: Reducing the operating temperature of normal conducting particle accelerators substantially increases their efficiency. Low-temperature operation increases the yield strength of the accelerator material and reduces surface resistance, hence a great reduction in cyclic fatigue could be achieved resulting in a large reduction in breakdown rates compared to room-temperature operation. Furthermore, te… ▽ More Reducing the operating temperature of normal conducting particle accelerators substantially increases their efficiency. Low-temperature operation increases the yield strength of the accelerator material and reduces surface resistance, hence a great reduction in cyclic fatigue could be achieved resulting in a large reduction in breakdown rates compared to room-temperature operation. Furthermore, temperature reduction increases the intrinsic quality factor of the accelerating cavities, and consequently, the shunt impedance leading to increased system efficiency and beam loading capabilities. In this paper, we present an experimental demonstration of the high-gradient operation of an X-band, 11.424 GHz, 20-cells linear accelerator (linac) operating at a liquid nitrogen temperature of 77 K. The tested linac was previously processed and tested at room temperature. We verified the enhanced accelerating parameters of the tested accelerator at cryogenic temperature using different measurements including electron beam acceleration up to a gradient of 150 MV/m, corresponding to a peak surface electric field of 375 MV/m. We also measured the breakdown rates in the tested structure showing a reduction of two orders of magnitude, x100, compared to their values at room temperature for the same accelerating gradient. △ Less

Submitted 31 October, 2020; originally announced November 2020.

Journal ref: Phys. Rev. Accel. Beams 24, 093201 (2021)

Event Reconstruction in a Liquid Xenon Time Projection Chamber with an Optically-Open Field Cage

Authors: T. Stiegler, S. Sangiorgio, J. P. Brodsky, M. Heffner, S. Al Kharusi, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, A. Bolotnikov, P. A. Breur, E. Brown, T. Brunner, E. Caden, G. F. Cao, L. Cao, C. Chambers, B. Chana, S. A. Charlebois, M. Chiu, B. Cleveland, M. Coon , et al. (126 additional authors not shown)

Abstract: nEXO is a proposed tonne-scale neutrinoless double beta decay ($0νββ$) experiment using liquid ${}^{136}Xe$ (LXe) in a Time Projection Chamber (TPC) to read out ionization and scintillation signals. Between the field cage and the LXe vessel, a layer of LXe ("skin" LXe) is present, where no ionization signal is collected. Only scintillation photons are detected, owing to the lack of optical barrier… ▽ More nEXO is a proposed tonne-scale neutrinoless double beta decay ($0νββ$) experiment using liquid ${}^{136}Xe$ (LXe) in a Time Projection Chamber (TPC) to read out ionization and scintillation signals. Between the field cage and the LXe vessel, a layer of LXe ("skin" LXe) is present, where no ionization signal is collected. Only scintillation photons are detected, owing to the lack of optical barrier around the field cage. In this work, we show that the light originating in the skin LXe region can be used to improve background discrimination by 5% over previous published estimates. This improvement comes from two elements. First, a fraction of the $γがんま$-ray background is removed by identifying light from interactions with an energy deposition in the skin LXe. Second, background from ${}^{222}Rn$ dissolved in the skin LXe can be efficiently rejected by tagging the $αあるふぁ$ decay in the ${}^{214}Bi-{}^{214}Po$ chain in the skin LXe. △ Less

Submitted 24 March, 2021; v1 submitted 21 September, 2020; originally announced September 2020.

Comments: 11 pages, 12 figures

Report number: LLNL-JRNL-814563

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1000 (2021) 165239

Measurement of the onset of nucleate boiling in liquid xenon

Authors: P. A. Breur, G. S. Ortega, P. C. Rowson, R. Saldanha, B. Mong, M. Oriunno, C. Mo

Abstract: We report the first precision measurement of the superheat temperature required for bubble nucleation in liquid xenon of $ΔでるたT_{wall,ONB}$ = (16.9$\pm$0.5) K and $ΔでるたT_{wall,ONB}$ = (19.2$^{+0.4}_{-1.1}$) K at pressures of P = $(0.98\pm0.02)$ bar and P = $(1.32^{+0.05}_{-0.01})$ bar, respectively. Both are measured at a subcooled bulk fluid temperature of $\sim$ 162 K. A dedicated liquid xenon setup i… ▽ More We report the first precision measurement of the superheat temperature required for bubble nucleation in liquid xenon of $ΔでるたT_{wall,ONB}$ = (16.9$\pm$0.5) K and $ΔでるたT_{wall,ONB}$ = (19.2$^{+0.4}_{-1.1}$) K at pressures of P = $(0.98\pm0.02)$ bar and P = $(1.32^{+0.05}_{-0.01})$ bar, respectively. Both are measured at a subcooled bulk fluid temperature of $\sim$ 162 K. A dedicated liquid xenon setup is used to measure the temperature at which bubble nucleation first appears on the flat surface of a resistor. The associated average heat flux at the surface of the resistor is determined using fluid dynamics simulations. Future experiments can use these experimental results to determine the likelihood of boiling in liquid xenon and to design effective thermal sinks that prevent bubble nucleation. △ Less

Submitted 21 July, 2020; originally announced July 2020.

Comments: 11 pages, 6 figures

Reflectance of Silicon Photomultipliers at Vacuum Ultraviolet Wavelengths

Authors: P. Lv, G. F. Cao, L. J. Wen, S. Al Kharusi, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, P. A. Breur, J. P. Brodsky, E. Brown, T. Brunner, S. Byrne Mamahit, E. Caden, L. Cao, C. Chambers, B. Chana, S. A. Charlebois, M. Chiu, B. Cleveland, M. Coon, A. Craycraft , et al. (126 additional authors not shown)

Abstract: Characterization of the vacuum ultraviolet (VUV) reflectance of silicon photomultipliers (SiPMs) is important for large-scale SiPM-based photodetector systems. We report the angular dependence of the specular reflectance in a vacuum of SiPMs manufactured by Fondazionc Bruno Kessler (FBK) and Hamamatsu Photonics K.K. (HPK) over wavelengths ranging from 120 nm to 280 nm. Refractive index and extinct… ▽ More Characterization of the vacuum ultraviolet (VUV) reflectance of silicon photomultipliers (SiPMs) is important for large-scale SiPM-based photodetector systems. We report the angular dependence of the specular reflectance in a vacuum of SiPMs manufactured by Fondazionc Bruno Kessler (FBK) and Hamamatsu Photonics K.K. (HPK) over wavelengths ranging from 120 nm to 280 nm. Refractive index and extinction coefficient of the thin silicon-dioxide film deposited on the surface of the FBK SiPMs are derived from reflectance data of a FBK silicon wafer with the same deposited oxide film as SiPMs. The diffuse reflectance of SiPMs is also measured at 193 nm. We use the VUV spectral dependence of the optical constants to predict the reflectance of the FBK silicon wafer and FBK SiPMs in liquid xenon. △ Less

Submitted 4 December, 2019; originally announced December 2019.

Measurements of electron transport in liquid and gas Xenon using a laser-driven photocathode

Authors: O. Njoya, T. Tsang, M. Tarka, W. Fairbank, K. S. Kumar, T. Rao, T. Wager, S. Al Kharusi, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, J. P. Brodsky, E. Brown, T. Brunner, E. Caden, G. F. Cao, L. Cao, W. R. Cen, C. Chambers, B. Chana, S. A. Charlebois , et al. (131 additional authors not shown)

Abstract: Measurements of electron drift properties in liquid and gaseous xenon are reported. The electrons are generated by the photoelectric effect in a semi-transparent gold photocathode driven in transmission mode with a pulsed ultraviolet laser. The charges drift and diffuse in a small chamber at various electric fields and a fixed drift distance of 2.0 cm. At an electric field of 0.5 kV/cm, the measur… ▽ More Measurements of electron drift properties in liquid and gaseous xenon are reported. The electrons are generated by the photoelectric effect in a semi-transparent gold photocathode driven in transmission mode with a pulsed ultraviolet laser. The charges drift and diffuse in a small chamber at various electric fields and a fixed drift distance of 2.0 cm. At an electric field of 0.5 kV/cm, the measured drift velocities and corresponding temperature coefficients respectively are $1.97 \pm 0.04$ mm/$μみゅー$s and $(-0.69\pm0.05)$\%/K for liquid xenon, and $1.42 \pm 0.03$ mm/$μみゅー$s and $(+0.11\pm0.01)$\%/K for gaseous xenon at 1.5 bar. In addition, we measure longitudinal diffusion coefficients of $25.7 \pm 4.6$ cm$^2$/s and $149 \pm 23$ cm$^2$/s, for liquid and gas, respectively. The quantum efficiency of the gold photocathode is studied at the photon energy of 4.73 eV in liquid and gaseous xenon, and vacuum. These charge transport properties and the behavior of photocathodes in a xenon environment are important in designing and calibrating future large scale noble liquid detectors. △ Less

Submitted 24 November, 2019; originally announced November 2019.

Reflectivity and PDE of VUV4 Hamamatsu SiPMs in Liquid Xenon

Authors: P. Nakarmi, I. Ostrovskiy, A. K. Soma, F. Retiere, S. Al Kharusi, M. Alfaris, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, J. Blatchford, P. A. Breur, J. P. Brodsky, E. Brown, T. Brunner, S. Byrne Mamahit, E. Caden, G. F. Cao, L. Cao, C. Chambers, B. Chana, S. A. Charlebois , et al. (130 additional authors not shown)

Abstract: Understanding reflective properties of materials and photodetection efficiency (PDE) of photodetectors is important for optimizing energy resolution and sensitivity of the next generation neutrinoless double beta decay, direct detection dark matter, and neutrino oscillation experiments that will use noble liquid gases, such as nEXO, DARWIN, DarkSide-20k, and DUNE. Little information is currently a… ▽ More Understanding reflective properties of materials and photodetection efficiency (PDE) of photodetectors is important for optimizing energy resolution and sensitivity of the next generation neutrinoless double beta decay, direct detection dark matter, and neutrino oscillation experiments that will use noble liquid gases, such as nEXO, DARWIN, DarkSide-20k, and DUNE. Little information is currently available about reflectivity and PDE in liquid noble gases, because such measurements are difficult to conduct in a cryogenic environment and at short enough wavelengths. Here we report a measurement of specular reflectivity and relative PDE of Hamamatsu VUV4 silicon photomultipliers (SiPMs) with 50 micrometer micro-cells conducted with xenon scintillation light (~175 nm) in liquid xenon. The specular reflectivity at 15 deg. incidence of three samples of VUV4 SiPMs is found to be 30.4+/-1.4%, 28.6+/-1.3%, and 28.0+/-1.3%, respectively. The PDE at normal incidence differs by +/-8% (standard deviation) among the three devices. The angular dependence of the reflectivity and PDE was also measured for one of the SiPMs. Both the reflectivity and PDE decrease as the angle of incidence increases. This is the first measurement of an angular dependence of PDE and reflectivity of a SiPM in liquid xenon. △ Less

Submitted 24 December, 2019; v1 submitted 14 October, 2019; originally announced October 2019.

Comments: 21 pages, 15 figures, 6 tables. As accepted by JINST

Simulation of charge readout with segmented tiles in nEXO

Authors: Z. Li, W. R. Cen, A. Robinson, D. C. Moore, L. J. Wen, A. Odian, S. Al Kharusi, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, J. P. Brodsky, E. Brown, T. Brunner, E. Caden, G. F. Cao, L. Cao, C. Chambers, B. Chana, S. A. Charlebois, M. Chiu, B. Cleveland , et al. (128 additional authors not shown)

Abstract: nEXO is a proposed experiment to search for the neutrino-less double beta decay ($0νββ$) of $^{136}$Xe in a tonne-scale liquid xenon time projection chamber (TPC). The nEXO TPC will be equipped with charge collection tiles to form the anode. In this work, the charge reconstruction performance of this anode design is studied with a dedicated simulation package. A multi-variate method and a deep neu… ▽ More nEXO is a proposed experiment to search for the neutrino-less double beta decay ($0νββ$) of $^{136}$Xe in a tonne-scale liquid xenon time projection chamber (TPC). The nEXO TPC will be equipped with charge collection tiles to form the anode. In this work, the charge reconstruction performance of this anode design is studied with a dedicated simulation package. A multi-variate method and a deep neural network are developed to distinguish simulated $0νββ$ signals from backgrounds arising from trace levels of natural radioactivity in the detector materials. These simulations indicate that the nEXO TPC with charge-collection tiles shows promising capability to discriminate the $0νββ$ signal from backgrounds. The estimated half-life sensitivity for $0νββ$ decay is improved by $\sim$20$~(32)\%$ with the multi-variate~(deep neural network) methods considered here, relative to the sensitivity estimated in the nEXO pre-conceptual design report. △ Less

Submitted 11 October, 2019; v1 submitted 17 July, 2019; originally announced July 2019.

Journal ref: JINST 14 (2019) no.09, P09020

Characterization of the Hamamatsu VUV4 MPPCs for nEXO

Authors: G. Gallina, P. Giampa, F. Retiere, J. Kroeger, G. Zhang, M. Ward, P. Margetak, G. Lic, T. Tsang, L. Doria, S. Al Kharusi, M. Alfaris, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, J. Blatchford, J. P. Brodsky, E. Brown, T. Brunner, G. F. Cao, L. Cao , et al. (126 additional authors not shown)

Abstract: In this paper we report on the characterization of the Hamamatsu VUV4 (S/N: S13370-6152) Vacuum Ultra-Violet (VUV) sensitive Silicon Photo-Multipliers (SiPMs) as part of the development of a solution for the detection of liquid xenon scintillation light for the nEXO experiment. Various SiPM features, such as: dark noise, gain, correlated avalanches, direct crosstalk and Photon Detection Efficiency… ▽ More In this paper we report on the characterization of the Hamamatsu VUV4 (S/N: S13370-6152) Vacuum Ultra-Violet (VUV) sensitive Silicon Photo-Multipliers (SiPMs) as part of the development of a solution for the detection of liquid xenon scintillation light for the nEXO experiment. Various SiPM features, such as: dark noise, gain, correlated avalanches, direct crosstalk and Photon Detection Efficiency (PDE) were measured in a dedicated setup at TRIUMF. SiPMs were characterized in the range $163 \text{ } \text{K} \leq \text{T}\leq 233 \text{ } \text{K}$. At an over voltage of $3.1\pm0.2$ V and at $\text{T}=163 \text{ }\text{K}$ we report a number of Correlated Avalanches (CAs) per pulse in the $1 \upmu\text{s}$ interval following the trigger pulse of $0.161\pm0.005$. At the same settings the Dark-Noise (DN) rate is $0.137\pm0.002 \text{ Hz/mm}^{2}$. Both the number of CAs and the DN rate are within nEXO specifications. The PDE of the Hamamatsu VUV4 was measured for two different devices at $\text{T}=233 \text{ }\text{K}$ for a mean wavelength of $189\pm7\text{ nm}$. At $3.6\pm0.2$ V and $3.5\pm0.2$ V of over voltage we report a PDE of $13.4\pm2.6\text{ }\%$ and $11\pm2\%$, corresponding to a saturation PDE of $14.8\pm2.8\text{ }\%$ and $12.2\pm2.3\%$, respectively. Both values are well below the $24\text{ }\%$ saturation PDE advertised by Hamamatsu. More generally, the second device tested at $3.5\pm0.2$ V of over voltage is below the nEXO PDE requirement. The first one instead yields a PDE that is marginally close to meeting the nEXO specifications. This suggests that with modest improvements the Hamamatsu VUV4 MPPCs could be considered as an alternative to the FBK-LF SiPMs for the final design of the nEXO detector. △ Less

Submitted 7 June, 2019; v1 submitted 8 March, 2019; originally announced March 2019.

Elastic differential cross-section ${\rm d}σしぐま/{\rm d}t$ at $\sqrt{s}=$2.76 TeV and implications on the existence of a colourless 3-gluon bound state

Authors: TOTEM Collaboration, G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, C. Baldenegro Barrera, V. Berardi, M. Berretti, E. Bossini, U. Bottigli, M. Bozzo, H. Burkhardt, F. S. Cafagna, M. G. Catanesi, M. Csanád, T. Csörgő, M. Deile, F. De Leonardis, M. Doubek, D. Druzhkin, K. Eggert, V. Eremin, F. Ferro, A. Fiergolski , et al. (51 additional authors not shown)

Abstract: The proton-proton elastic differential cross section ${\rm d}σしぐま/{\rm d}t$ has been measured by the TOTEM experiment at $\sqrt{s}=2.76$ TeV energy with $βべーた^{*}=11$ m beam optics. The Roman Pots were inserted to 13 times the transverse beam size from the beam, which allowed to measure the differential cross-section of elastic scattering in a range of the squared four-momentum transfer ($|t|$) from… ▽ More The proton-proton elastic differential cross section ${\rm d}σしぐま/{\rm d}t$ has been measured by the TOTEM experiment at $\sqrt{s}=2.76$ TeV energy with $βべーた^{*}=11$ m beam optics. The Roman Pots were inserted to 13 times the transverse beam size from the beam, which allowed to measure the differential cross-section of elastic scattering in a range of the squared four-momentum transfer ($|t|$) from $0.36$ GeV$^{2}$ to $0.74$ GeV$^{2}$. The differential cross-section can be described with an exponential in the $|t|$-range between $0.36$ GeV$^{2}$ and $0.54$ GeV$^{2}$, followed by a diffractive minimum (dip) at $|t_{\rm dip}| = 0.61 \pm 0.03$ GeV$^{2}$ and a subsequent maximum (bump). The ratio of the ${\rm d}σしぐま/{\rm d}t$ at the bump and at the dip is $1.7\pm 0.2$. When compared to the $\rm p\bar{p}$ measurement of the D0 experiment at $\sqrt s = 1.96$ TeV, a significant difference can be observed. Under the condition that the effects due to the energy difference between TOTEM and D0 can be neglected, the result provides evidence for a colourless 3-gluon bound state exchange in the $t$-channel of the proton-proton elastic scattering. △ Less

Submitted 20 December, 2018; originally announced December 2018.

Comments: 75 authors, 17 pages, 10 figures, 3 tables

Report number: CERN-EP-2018-341

Journal ref: Eur.Phys.J.C 80 (2020) 2, 91

Elastic differential cross-section measurement at $\sqrt{s}=13$ TeV by TOTEM

Authors: TOTEM Collaboration, G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, C. Baldenegro Barrera, V. Berardi, M. Berretti, E. Bossini, U. Bottigli, M. Bozzo, H. Burkhardt, F. S. Cafagna, M. G. Catanesi, M. Csanád, T. Csörgő, M. Deile, F. De Leonardis, M. Doubek, D. Druzhkin, K. Eggert, V. Eremin, F. Ferro, A. Fiergolski , et al. (52 additional authors not shown)

Abstract: The TOTEM collaboration has measured the elastic proton-proton differential cross section ${\rm d}σしぐま/{\rm d}t$ at $\sqrt{s}=13$ TeV LHC energy using dedicated $βべーた^{*}=90$ m beam optics. The Roman Pot detectors were inserted to 10$σしぐま$ distance from the LHC beam, which allowed the measurement of the range $[0.04$ GeV$^{2}$$; 4 $GeV$^{2}$$]$ in four-momentum transfer squared $|t|$. The efficient data ac… ▽ More The TOTEM collaboration has measured the elastic proton-proton differential cross section ${\rm d}σしぐま/{\rm d}t$ at $\sqrt{s}=13$ TeV LHC energy using dedicated $βべーた^{*}=90$ m beam optics. The Roman Pot detectors were inserted to 10$σしぐま$ distance from the LHC beam, which allowed the measurement of the range $[0.04$ GeV$^{2}$$; 4 $GeV$^{2}$$]$ in four-momentum transfer squared $|t|$. The efficient data acquisition allowed to collect about 10$^{9}$ elastic events to precisely measure the differential cross-section including the diffractive minimum (dip), the subsequent maximum (bump) and the large-$|t|$ tail. The average nuclear slope has been found to be $B=(20.40 \pm 0.002^{\rm stat} \pm 0.01^{\rm syst})~$GeV$^{-2}$ in the $|t|$-range $0.04~$GeV$^{2}$ to $0.2~$GeV$^{2}$. The dip position is $|t_{\rm dip}|=(0.47 \pm 0.004^{\rm stat} \pm 0.01^{\rm syst})~$GeV$^{2}$. The differential cross section ratio at the bump vs. at the dip $R=1.77\pm0.01^{\rm stat}$ has been measured with high precision. The series of TOTEM elastic pp measurements show that the dip is a permanent feature of the pp differential cross-section at the TeV scale. △ Less

Submitted 19 December, 2018; originally announced December 2018.

Comments: 76 authors, 20 pages, 11 figures, 5 tables

Report number: CERN-EP-2018-338

Journal ref: Eur.Phys.J.C 79 (2019) 10, 861

The Compact Linear Collider (CLIC) - 2018 Summary Report

Authors: The CLIC, CLICdp collaborations, :, T. K. Charles, P. J. Giansiracusa, T. G. Lucas, R. P. Rassool, M. Volpi, C. Balazs, K. Afanaciev, V. Makarenko, A. Patapenka, I. Zhuk, C. Collette, M. J. Boland, A. C. Abusleme Hoffman, M. A. Diaz, F. Garay, Y. Chi, X. He, G. Pei, S. Pei, G. Shu, X. Wang, J. Zhang , et al. (671 additional authors not shown)

Abstract: The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the… ▽ More The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years. △ Less

Submitted 6 May, 2019; v1 submitted 14 December, 2018; originally announced December 2018.

Comments: 112 pages, 59 figures; published as CERN Yellow Report Monograph Vol. 2/2018; corresponding editors: Philip N. Burrows, Nuria Catalan Lasheras, Lucie Linssen, Marko Petrič, Aidan Robson, Daniel Schulte, Eva Sicking, Steinar Stapnes

Report number: CERN-2018-005-M

First determination of the $ρろー$ parameter at $\sqrt{s} = 13$ TeV -- probing the existence of a colourless three-gluon bound state

Authors: TOTEM Collaboration, G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, C. Baldenegro Barrera, V. Berardi, M. Berretti, E. Bossini, U. Bottigli, M. Bozzo, R. Bruce, H. Burkhardt, F. S. Cafagna, M. G. Catanesi, M. Csanád, T. Csörgő, M. Deile, F. De Leonardis, A. D'Orazio, M. Doubek, D. Druzhkin, K. Eggert, V. Eremin , et al. (71 additional authors not shown)

Abstract: The TOTEM experiment at the LHC has performed the first measurement at $\sqrt{s} = 13$ TeV of the $ρろー$ parameter, the real to imaginary ratio of the nuclear elastic scattering amplitude at $t=0$, obtaining the following results: $ρろー= 0.09 \pm 0.01$ and $ρろー= 0.10 \pm 0.01$, depending on different physics assumptions and mathematical modelling. The unprecedented precision of the $ρろー$ measurement, combin… ▽ More The TOTEM experiment at the LHC has performed the first measurement at $\sqrt{s} = 13$ TeV of the $ρろー$ parameter, the real to imaginary ratio of the nuclear elastic scattering amplitude at $t=0$, obtaining the following results: $ρろー= 0.09 \pm 0.01$ and $ρろー= 0.10 \pm 0.01$, depending on different physics assumptions and mathematical modelling. The unprecedented precision of the $ρろー$ measurement, combined with the TOTEM total cross-section measurements in an energy range larger than 10 TeV (from 2.76 to 13 TeV), has implied the exclusion of all the models classified and published by COMPETE. The $ρろー$ results obtained by TOTEM are compatible with the predictions, from alternative theoretical models both in the Regge-like framework and in the QCD framework, of a colourless 3-gluon bound state exchange in the $t$-channel of the proton-proton elastic scattering. On the contrary, if shown that the 3-gluon bound state $t$-channel exchange is not of importance for the description of elastic scattering, the $ρろー$ value determined by TOTEM would represent a first evidence of a slowing down of the total cross-section growth at higher energies. The very low-$|t|$ reach allowed also to determine the absolute normalisation using the Coulomb amplitude for the first time at the LHC and obtain a new total proton-proton cross-section measurement $σしぐま_{tot} = 110.3 \pm 3.5$ mb, completely independent from the previous TOTEM determination. Combining the two TOTEM results yields $σしぐま_{tot} = 110.5 \pm 2.4$ mb. △ Less

Submitted 11 December, 2018; originally announced December 2018.

Comments: 95 authors, 30 pages, 20 figures, 6 tables, submitted for publication. arXiv admin note: text overlap with arXiv:1610.00603

Report number: CERN-EP-2017-335-v3

Search for a Dark Photon in Electro-Produced $e^{+}e^{-}$ Pairs with the Heavy Photon Search Experiment at JLab

Authors: P. H. Adrian, N. A. Baltzell, M. Battaglieri, M. Bondí, S. Boyarinov, S. Bueltmann, V. D. Burkert, D. Calvo, M. Carpinelli, A. Celentano, G. Charles, L. Colaneri, W. Cooper, C. Cuevas, A. D'Angelo, N. Dashyan, M. De Napoli, R. De Vita, A. Deur, R. Dupre, H. Egiyan, L. Elouadrhiri, R. Essig, V. Fadeyev, C. Field , et al. (52 additional authors not shown)

Abstract: The Heavy Photon Search experiment took its first data in a 2015 engineering run using a 1.056 GeV, 50 nA electron beam provided by CEBAF at the Thomas Jefferson National Accelerator Facility, searching for an electro-produced dark photon. Using 1.7 days (1170 nb$^{-1}$) of data, a search for a resonance in the $e^{+}e^{-}$ invariant mass distribution between 19 and 81 MeV/c$^2$ showed no evidence… ▽ More The Heavy Photon Search experiment took its first data in a 2015 engineering run using a 1.056 GeV, 50 nA electron beam provided by CEBAF at the Thomas Jefferson National Accelerator Facility, searching for an electro-produced dark photon. Using 1.7 days (1170 nb$^{-1}$) of data, a search for a resonance in the $e^{+}e^{-}$ invariant mass distribution between 19 and 81 MeV/c$^2$ showed no evidence of dark photon decays above the large QED background, confirming earlier searches and demonstrating the full functionality of the experiment. Upper limits on the square of the coupling of the dark photon to the Standard Model photon are set at the level of 6$\times$10$^{-6}$. In addition, a search for displaced dark photon decays did not rule out any territory but resulted in a reliable analysis procedure that will probe hitherto unexplored parameter space with future, higher luminosity runs. △ Less

Submitted 5 December, 2018; originally announced December 2018.

Comments: 8 pages, Proceedings of the 39th International Conference on High Energy Physics (ICHEP 2018), 4-11 July, 2018, Seoul, Korea

Search for a Dark Photon in Electro-Produced $e^{+}e^{-}$ Pairs with the Heavy Photon Search Experiment at JLab

Authors: P. H. Adrian, N. A. Baltzell, M. Battaglieri, M. Bondí, S. Boyarinov, S. Bueltmann, V. D. Burkert, D. Calvo, M. Carpinelli, A. Celentano, G. Charles, L. Colaneri, W. Cooper, C. Cuevas, A. D'Angelo, N. Dashyan, M. De Napoli, R. De Vita, A. Deur, R. Dupre, H. Egiyan, L. Elouadrhiri, R. Essig, V. Fadeyev, C. Field , et al. (52 additional authors not shown)

Abstract: The Heavy Photon Search experiment took its first data in a 2015 engineering run at the Thomas Jefferson National Accelerator Facility, searching for a prompt, electro-produced dark photon with a mass between 19 and 81 MeV/$c^2$. A search for a resonance in the $e^{+}e^{-}$ invariant mass distribution, using 1.7 days (1170 nb$^{-1}$) of data, showed no evidence of dark photon decays above the larg… ▽ More The Heavy Photon Search experiment took its first data in a 2015 engineering run at the Thomas Jefferson National Accelerator Facility, searching for a prompt, electro-produced dark photon with a mass between 19 and 81 MeV/$c^2$. A search for a resonance in the $e^{+}e^{-}$ invariant mass distribution, using 1.7 days (1170 nb$^{-1}$) of data, showed no evidence of dark photon decays above the large QED background, confirming earlier searches and demonstrating the full functionality of the experiment. Upper limits on the square of the coupling of the dark photon to the Standard Model photon are set at the level of 6$\times$10$^{-6}$. Future runs with higher luminosity will explore new territory. △ Less

Submitted 3 August, 2018; v1 submitted 30 July, 2018; originally announced July 2018.

Journal ref: Phys. Rev. D 98, 091101 (2018)

An Advanced NCRF Linac Concept for a High Energy e$^+$e$^-$ Linear Collider

Authors: Karl L. Bane, Timothy L. Barklow, Martin Breidenbach, Craig P. Burkhart, Eric A. Fauve, Alysson R. Gold, Vincent Heloin, Zenghai Li, Emilio A. Nanni, Mamdouh Nasr, Marco Oriunno, James McEwan Paterson, Michael E. Peskin, Tor O. Raubenheimer, Sami G. Tantawi

Abstract: We have explored a concept for an advanced Normal-Conducting Radio-Frequency (NCRF) C-band linear accelerator (linac) structure to achieve a high gradient, high power e$^+$e$^-$ linear collider in the TeV class. This design study represents the first comprehensive investigation for an emerging class of distributed coupling accelerator topology exploring nominal cavity geometries, frequency and tem… ▽ More We have explored a concept for an advanced Normal-Conducting Radio-Frequency (NCRF) C-band linear accelerator (linac) structure to achieve a high gradient, high power e$^+$e$^-$ linear collider in the TeV class. This design study represents the first comprehensive investigation for an emerging class of distributed coupling accelerator topology exploring nominal cavity geometries, frequency and temperature of operation. The structure features internal manifolds for distributing RF power separately to each cell, permitting the full structure geometry to be designed for high shunt impedance and low breakdown. Optimized within operational constraints, we find that it is advantageous for the structure to be cooled directly by liquid nitrogen (LN), further increasing the shunt impedance. A crucial part of this design process has been cost optimization, which is largely driven by the cost of peak RF power. The first operation of a distributed coupling structure at cryogenic temperatures and the nominal operating gradient 120 MeV/m is also presented, demonstrating the feasibility of achieving high-gradient performance with a cryogenically-cooled normal-conducting accelerating structure. △ Less

Submitted 7 April, 2019; v1 submitted 26 July, 2018; originally announced July 2018.

Study of Silicon Photomultiplier Performance in External Electric Fields

Authors: X. L. Sun, T. Tolba, G. F. Cao, P. Lv, L. J. Wen, A. Odian, F. Vachon, A. Alamre, J. B. Albert, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, F. Bourque, J. P. Brodsky, E. Brown, T. Brunner, A. Burenkov, L. Cao, W. R. Cen, C. Chambers, S. A. Charlebois , et al. (127 additional authors not shown)

Abstract: We report on the performance of silicon photomultiplier (SiPM) light sensors operating in electric field strength up to 30 kV/cm and at a temperature of 149K, relative to their performance in the absence of an external electric field. The SiPM devices used in this study show stable gain, photon detection efficiency, and rates of correlated pulses, when exposed to external fields, within the estima… ▽ More We report on the performance of silicon photomultiplier (SiPM) light sensors operating in electric field strength up to 30 kV/cm and at a temperature of 149K, relative to their performance in the absence of an external electric field. The SiPM devices used in this study show stable gain, photon detection efficiency, and rates of correlated pulses, when exposed to external fields, within the estimated uncertainties. No observable physical damage to the bulk or surface of the devices was caused by the exposure. △ Less

Submitted 9 July, 2018; originally announced July 2018.

Comments: 16 pages, 12 figures, 2 tables and two conferences (INPC2016 and TIPP2017)

Imaging individual barium atoms in solid xenon for barium tagging in nEXO

Authors: C. Chambers, T. Walton, D. Fairbank, A. Craycraft, D. R. Yahne, J. Todd, A. Iverson, W. Fairbank, A. Alamare, J. B. Albert, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, F. Bourque, J. P. Brodsky, E. Brown, T. Brunner, A. Burenkov, G. F. Cao, L. Cao, W. R. Cen , et al. (126 additional authors not shown)

Abstract: The search for neutrinoless double beta decay probes the fundamental properties of neutrinos, including whether or not the neutrino and antineutrino are distinct. Double beta detectors are large and expensive, so background reduction is essential for extracting the highest sensitivity. The identification, or 'tagging', of the $^{136}$Ba daughter atom from double beta decay of $^{136}$Xe provides a… ▽ More The search for neutrinoless double beta decay probes the fundamental properties of neutrinos, including whether or not the neutrino and antineutrino are distinct. Double beta detectors are large and expensive, so background reduction is essential for extracting the highest sensitivity. The identification, or 'tagging', of the $^{136}$Ba daughter atom from double beta decay of $^{136}$Xe provides a technique for eliminating backgrounds in the nEXO neutrinoless double beta decay experiment. The tagging scheme studied in this work utilizes a cryogenic probe to trap the barium atom in solid xenon, where the barium atom is tagged via fluorescence imaging in the solid xenon matrix. Here we demonstrate imaging and counting of individual atoms of barium in solid xenon by scanning a focused laser across a solid xenon matrix deposited on a sapphire window. When the laser sits on an individual atom, the fluorescence persists for $\sim$30~s before dropping abruptly to the background level, a clear confirmation of one-atom imaging. No barium fluorescence persists following evaporation of a barium deposit to a limit of $\leq$0.16\%. This is the first time that single atoms have been imaged in solid noble element. It establishes the basic principle of a barium tagging technique for nEXO. △ Less

Submitted 12 December, 2018; v1 submitted 27 June, 2018; originally announced June 2018.

VUV-sensitive Silicon Photomultipliers for Xenon Scintillation Light Detection in nEXO

Authors: A. Jamil, T. Ziegler, P. Hufschmidt, G. Li, L. Lupin-Jimenez, T. Michel, I. Ostrovskiy, F. Retière, J. Schneider, M. Wagenpfeil, J. B. Albert, G. Anton, I. J. Arnquist, I. Badhrees, P. Barbeau, D. Beck, V. Belov, J. P. Brodsky, E. Brown, T. Brunner, A. Burenkov, G. F. Cao, L. Cao, W. R. Cen, C. Chambers , et al. (118 additional authors not shown)

Abstract: Future tonne-scale liquefied noble gas detectors depend on efficient light detection in the VUV range. In the past years Silicon Photomultipliers (SiPMs) have emerged as a valid alternative to standard photomultiplier tubes or large area avalanche photodiodes. The next generation double beta decay experiment, nEXO, with a 5 tonne liquid xenon time projection chamber, will use SiPMs for detecting t… ▽ More Future tonne-scale liquefied noble gas detectors depend on efficient light detection in the VUV range. In the past years Silicon Photomultipliers (SiPMs) have emerged as a valid alternative to standard photomultiplier tubes or large area avalanche photodiodes. The next generation double beta decay experiment, nEXO, with a 5 tonne liquid xenon time projection chamber, will use SiPMs for detecting the $178\,\text{nm}$ xenon scintillation light, in order to achieve an energy resolution of $σしぐま/ Q_{βべーたβべーた} = 1\, \%$. This paper presents recent measurements of the VUV-HD generation SiPMs from Fondazione Bruno Kessler in two complementary setups. It includes measurements of the photon detection efficiency with gaseous xenon scintillation light in a vacuum setup and dark measurements in a dry nitrogen gas setup. We report improved photon detection efficiency at $175\,\text{nm}$ compared to previous generation devices, that would meet the criteria of nEXO. Furthermore, we present the projected nEXO detector light collection and energy resolution that could be achieved by using these SiPMs. △ Less

Submitted 13 March, 2019; v1 submitted 6 June, 2018; originally announced June 2018.

Comments: 11 pages, 13 figures, 2 tables

Journal ref: IEEE Trans.Nucl.Sci. 65 (2018) no.11

nEXO Pre-Conceptual Design Report

Authors: nEXO Collaboration, S. Al Kharusi, A. Alamre, J. B. Albert, M. Alfaris, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, F. Bourque, J. P. Brodsky, E. Brown, T. Brunner, A. Burenkov, G. F. Cao, L. Cao, W. R. Cen, C. Chambers, S. A. Charlebois, M. Chiu, B. Cleveland, R. Conley , et al. (149 additional authors not shown)

Abstract: The projected performance and detector configuration of nEXO are described in this pre-Conceptual Design Report (pCDR). nEXO is a tonne-scale neutrinoless double beta ($0νββ$) decay search in $^{136}$Xe, based on the ultra-low background liquid xenon technology validated by EXO-200. With $\simeq$ 5000 kg of xenon enriched to 90% in the isotope 136, nEXO has a projected half-life sensitivity of app… ▽ More The projected performance and detector configuration of nEXO are described in this pre-Conceptual Design Report (pCDR). nEXO is a tonne-scale neutrinoless double beta ($0νββ$) decay search in $^{136}$Xe, based on the ultra-low background liquid xenon technology validated by EXO-200. With $\simeq$ 5000 kg of xenon enriched to 90% in the isotope 136, nEXO has a projected half-life sensitivity of approximately $10^{28}$ years. This represents an improvement in sensitivity of about two orders of magnitude with respect to current results. Based on the experience gained from EXO-200 and the effectiveness of xenon purification techniques, we expect the background to be dominated by external sources of radiation. The sensitivity increase is, therefore, entirely derived from the increase of active mass in a monolithic and homogeneous detector, along with some technical advances perfected in the course of a dedicated R&D program. Hence the risk which is inherent to the construction of a large, ultra-low background detector is reduced, as the intrinsic radioactive contamination requirements are generally not beyond those demonstrated with the present generation $0νββ$ decay experiments. Indeed, most of the required materials have been already assayed or reasonable estimates of their properties are at hand. The details described herein represent the base design of the detector configuration as of early 2018. Where potential design improvements are possible, alternatives are discussed. This design for nEXO presents a compelling path towards a next generation search for $0νββ$, with a substantial possibility to discover physics beyond the Standard Model. △ Less

Submitted 13 August, 2018; v1 submitted 28 May, 2018; originally announced May 2018.

Comments: 182 pages, minor revisions

Production and Integration of the ATLAS Insertable B-Layer

Authors: B. Abbott, J. Albert, F. Alberti, M. Alex, G. Alimonti, S. Alkire, P. Allport, S. Altenheiner, L. Ancu, E. Anderssen, A. Andreani, A. Andreazza, B. Axen, J. Arguin, M. Backhaus, G. Balbi, J. Ballansat, M. Barbero, G. Barbier, A. Bassalat, R. Bates, P. Baudin, M. Battaglia, T. Beau, R. Beccherle , et al. (352 additional authors not shown)

Abstract: During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and i… ▽ More During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector. △ Less

Submitted 6 June, 2018; v1 submitted 2 March, 2018; originally announced March 2018.

Comments: 90 pages in total. Author list: ATLAS IBL Collaboration, starting page 2. 69 figures, 20 tables. Published in Journal of Instrumentation. All figures available at: https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PLOTS/PIX-2018-001

Journal ref: Journal of Instrumentation JINST 13 T05008 (2018)

First measurement of elastic, inelastic and total cross-section at $\sqrt{s}=13$ TeV by TOTEM and overview of cross-section data at LHC energies

Authors: The TOTEM Collaboration, . Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, C. Baldenegro Barrera, V. Berardi, M. Berretti, E. Bossini, U. Bottigli, M. Bozzo, H. Burkhardt, F. S. Cafagna, M. G. Catanesi, M. Csanád, T. Csörgő, M. Deile, F. De Leonardis, A. D'Orazio, M. Doubek, D. Druzhkin, K. Eggert, V. Eremin, F. Ferro , et al. (64 additional authors not shown)

Abstract: The TOTEM collaboration has measured the proton-proton total cross section at $\sqrt{s}=13$ TeV with a luminosity-independent method. Using dedicated $βべーた^{*}=90$ m beam optics, the Roman Pots were inserted very close to the beam. The inelastic scattering rate has been measured by the T1 and T2 telescopes during the same LHC fill. After applying the optical theorem the total proton-proton cross sect… ▽ More The TOTEM collaboration has measured the proton-proton total cross section at $\sqrt{s}=13$ TeV with a luminosity-independent method. Using dedicated $βべーた^{*}=90$ m beam optics, the Roman Pots were inserted very close to the beam. The inelastic scattering rate has been measured by the T1 and T2 telescopes during the same LHC fill. After applying the optical theorem the total proton-proton cross section is $σしぐま_{\rm tot}=(110.6 \pm 3.4$) mb, well in agreement with the extrapolation from lower energies. This method also allows one to derive the luminosity-independent elastic and inelastic cross sections: $σしぐま_{\rm el} = (31.0 \pm 1.7)$ mb and $σしぐま_{\rm inel} = (79.5 \pm 1.8)$ mb. △ Less

Submitted 31 January, 2018; v1 submitted 17 December, 2017; originally announced December 2017.

Comments: 16 pages, 7 figures, 5 tables. Three figures, the references and the author list was updated, presentation is improved. Submitted for a publication to Phys. Rev. D

Report number: CERN-EP-2017-321-v2

Characterization of an Ionization Readout Tile for nEXO

Authors: nEXO Collaboration, M. Jewell, A. Schubert, W. R. Cen, J. Dalmasson, R. DeVoe, L. Fabris, G. Gratta, A. Jamil, G. Li, A. Odian, M. Patel, A. Pocar, D. Qiu, Q. Wang, L. J. Wen, J. B. Albert, G. Anton, I. J. Arnquist, I. Badhrees, P. Barbeau, D. Beck, V. Belov, F. Bourque, J. P. Brodsky , et al. (120 additional authors not shown)

Abstract: A new design for the anode of a time projection chamber, consisting of a charge-detecting "tile", is investigated for use in large scale liquid xenon detectors. The tile is produced by depositing 60 orthogonal metal charge-collecting strips, 3~mm wide, on a 10~\si{\cm} $\times$ 10~\si{\cm} fused-silica wafer. These charge tiles may be employed by large detectors, such as the proposed tonne-scale n… ▽ More A new design for the anode of a time projection chamber, consisting of a charge-detecting "tile", is investigated for use in large scale liquid xenon detectors. The tile is produced by depositing 60 orthogonal metal charge-collecting strips, 3~mm wide, on a 10~\si{\cm} $\times$ 10~\si{\cm} fused-silica wafer. These charge tiles may be employed by large detectors, such as the proposed tonne-scale nEXO experiment to search for neutrinoless double-beta decay. Modular by design, an array of tiles can cover a sizable area. The width of each strip is small compared to the size of the tile, so a Frisch grid is not required. A grid-less, tiled anode design is beneficial for an experiment such as nEXO, where a wire tensioning support structure and Frisch grid might contribute radioactive backgrounds and would have to be designed to accommodate cycling to cryogenic temperatures. The segmented anode also reduces some degeneracies in signal reconstruction that arise in large-area crossed-wire time projection chambers. A prototype tile was tested in a cell containing liquid xenon. Very good agreement is achieved between the measured ionization spectrum of a $^{207}$Bi source and simulations that include the microphysics of recombination in xenon and a detailed modeling of the electrostatic field of the detector. An energy resolution $σしぐま/E$=5.5\% is observed at 570~\si{keV}, comparable to the best intrinsic ionization-only resolution reported in literature for liquid xenon at 936~V/\si{cm}. △ Less

Submitted 19 January, 2018; v1 submitted 13 October, 2017; originally announced October 2017.

Comments: 18 pages, 13 figures, as published

Journal ref: 2018 JINST 13 P01006

Sensitivity and discovery potential of the proposed nEXO experiment to neutrinoless double beta decay

Authors: nEXO Collaboration, J. B. Albert, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, F. Bourque, J. P. Brodsky, E. Brown, T. Brunner, A. Burenkov, G. F. Cao, L. Cao, W. R. Cen, C. Chambers, S. A. Charlebois, M. Chiu, B. Cleveland, M. Coon, M. Côté, A. Craycraft, W. Cree, J. Dalmasson , et al. (121 additional authors not shown)

Abstract: The next-generation Enriched Xenon Observatory (nEXO) is a proposed experiment to search for neutrinoless double beta ($0νββ$) decay in $^{136}$Xe with a target half-life sensitivity of approximately $10^{28}$ years using $5\times10^3$ kg of isotopically enriched liquid-xenon in a time projection chamber. This improvement of two orders of magnitude in sensitivity over current limits is obtained by… ▽ More The next-generation Enriched Xenon Observatory (nEXO) is a proposed experiment to search for neutrinoless double beta ($0νββ$) decay in $^{136}$Xe with a target half-life sensitivity of approximately $10^{28}$ years using $5\times10^3$ kg of isotopically enriched liquid-xenon in a time projection chamber. This improvement of two orders of magnitude in sensitivity over current limits is obtained by a significant increase of the $^{136}$Xe mass, the monolithic and homogeneous configuration of the active medium, and the multi-parameter measurements of the interactions enabled by the time projection chamber. The detector concept and anticipated performance are presented based upon demonstrated realizable background rates. △ Less

Submitted 19 October, 2018; v1 submitted 13 October, 2017; originally announced October 2017.

Comments: v2 as published

Report number: LLNL-JRNL-737682

Journal ref: Phys. Rev. C 97, 065503 (2018)

Diamond Detectors for the TOTEM Timing Upgrade

Authors: TOTEM Collaboration, G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, V. Berardi, M. Berretti, E. Bossini, U. Bottigli, M. Bozzo, P. Broulím, A. Buzzo, F. S. Cafagna, M. G. Catanesi, M. Csanád, T. Csörgő, M. Deile, F. De Leonardis, A. D'Orazio, M. Doubek, K. Eggert, V. Eremin, F. Ferro, A. Fiergolski , et al. (58 additional authors not shown)

Abstract: This paper describes the design and the performance of the timing detector developed by the TOTEM Collaboration for the Roman Pots (RPs) to measure the Time-Of-Flight (TOF) of the protons produced in central diffractive interactions at the LHC. The measurement of the TOF of the protons allows the determination of the longitudinal position of the proton interaction vertex and its association with o… ▽ More This paper describes the design and the performance of the timing detector developed by the TOTEM Collaboration for the Roman Pots (RPs) to measure the Time-Of-Flight (TOF) of the protons produced in central diffractive interactions at the LHC. The measurement of the TOF of the protons allows the determination of the longitudinal position of the proton interaction vertex and its association with one of the vertices reconstructed by the CMS detectors. The TOF detector is based on single crystal Chemical Vapor Deposition (scCVD) diamond plates and is designed to measure the protons TOF with about 50 ps time precision. This upgrade to the TOTEM apparatus will be used in the LHC run 2 and will tag the central diffractive events up to an interaction pileup of about 1. A dedicated fast and low noise electronics for the signal amplification has been developed. The digitization of the diamond signal is performed by sampling the waveform. After introducing the physics studies that will most profit from the addition of these new detectors, we discuss in detail the optimization and the performance of the first TOF detector installed in the LHC in November 2015. △ Less

Submitted 18 January, 2017; originally announced January 2017.

Comments: 26 pages, 18 figures, 2 tables, submitted for publication to JINST

Report number: CERN-PH-EP-2016-317

Journal ref: JINST 12 (2017) no.03, P03007

The Heavy Photon Search beamline and its performance

Authors: N. Baltzell, H. Egiyan, M. Ehrhart, C. Field, A. Freyberger, F. -X. Girod, M. Holtrop, J. Jaros, G. Kalicy, T. Maruyama, B. McKinnon, K. Moffeit, T. Nelson, A. Odian, M. Oriunno, R. Paremuzyan, S. Stepanyan, M. Tiefenback, S. Uemura, M. Ungaro, H. Vance

Abstract: The Heavy Photon Search (HPS) is an experiment to search for a hidden sector photon, aka a heavy photon or dark photon, in fixed target electroproduction at the Thomas Jefferson National Accelerator Facility (JLab). The HPS experiment searches for the e$^+$e$^-$ decay of the heavy photon with bump hunt and detached vertex strategies using a compact, large acceptance forward spectrometer, consistin… ▽ More The Heavy Photon Search (HPS) is an experiment to search for a hidden sector photon, aka a heavy photon or dark photon, in fixed target electroproduction at the Thomas Jefferson National Accelerator Facility (JLab). The HPS experiment searches for the e$^+$e$^-$ decay of the heavy photon with bump hunt and detached vertex strategies using a compact, large acceptance forward spectrometer, consisting of a silicon microstrip detector (SVT) for tracking and vertexing, and a PbWO$_4$ electromagnetic calorimeter for energy measurement and fast triggering. To achieve large acceptance and good vertexing resolution, the first layer of silicon detectors is placed just 10 cm downstream of the target with the sensor edges only 500 $μみゅー$m above and below the beam. Placing the SVT in such close proximity to the beam puts stringent requirements on the beam profile and beam position stability. As part of an approved engineering run, HPS took data in 2015 and 2016 at 1.05 GeV and 2.3 GeV beam energies, respectively. This paper describes the beam line and its performance during that data taking. △ Less

Submitted 22 December, 2016; originally announced December 2016.

Measurement of Elastic pp Scattering at $\sqrt{s}$ = 8 TeV in the Coulomb-Nuclear Interference Region - Determination of the $ρろー$-Parameter and the Total Cross-Section

Authors: TOTEM Collaboration, G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, V. Berardi, M. Berretti, E. Bossini, U. Bottigli, M. Bozzo, P. Broulím, H. Burkhardt, A. Buzzo, F. S. Cafagna, C. E. Campanella, M. G. Catanesi, M. Csanád, T. Csörgő, M. Deile, F. De Leonardis, A. D'Orazio, M. Doubek, K. Eggert, V. Eremin , et al. (65 additional authors not shown)

Abstract: The TOTEM experiment at the CERN LHC has measured elastic proton-proton scattering at the centre-of-mass energy $\sqrt{s}$ = 8 TeV and four-momentum transfers squared, |t|, from 6 x $10^{-4}$ GeV$^2$ to 0.2 GeV$^2$. Near the lower end of the |t|-interval the differential cross-section is sensitive to the interference between the hadronic and the electromagnetic scattering amplitudes. This article… ▽ More The TOTEM experiment at the CERN LHC has measured elastic proton-proton scattering at the centre-of-mass energy $\sqrt{s}$ = 8 TeV and four-momentum transfers squared, |t|, from 6 x $10^{-4}$ GeV$^2$ to 0.2 GeV$^2$. Near the lower end of the |t|-interval the differential cross-section is sensitive to the interference between the hadronic and the electromagnetic scattering amplitudes. This article presents the elastic cross-section measurement and the constraints it imposes on the functional forms of the modulus and phase of the hadronic elastic amplitude. The data exclude the traditional Simplified West and Yennie interference formula that requires a constant phase and a purely exponential modulus of the hadronic amplitude. For parametrisations of the hadronic modulus with second- or third-order polynomials in the exponent, the data are compatible with hadronic phase functions giving either central or peripheral behaviour in the impact parameter picture of elastic scattering. In both cases, the $ρろー$-parameter is found to be 0.12 $\pm$ 0.03. The results for the total hadronic cross-section are $σしぐま_{tot}$ = (102.9 $\pm$ 2.3) mb and (103.0 $\pm$ 2.3) mb for central and peripheral phase formulations, respectively. Both are consistent with previous TOTEM measurements. △ Less

Submitted 3 October, 2016; originally announced October 2016.

Comments: 22 pages, 19 figures, 5 tables, accepted for publication in EPJ C

Report number: CERN-PH-EP-2015-325

Journal ref: Eur. Phys. J. C (2016) 76: 661

Updated baseline for a staged Compact Linear Collider

Authors: The CLIC, CLICdp collaborations, :, M. J. Boland, U. Felzmann, P. J. Giansiracusa, T. G. Lucas, R. P. Rassool, C. Balazs, T. K. Charles, K. Afanaciev, I. Emeliantchik, A. Ignatenko, V. Makarenko, N. Shumeiko, A. Patapenka, I. Zhuk, A. C. Abusleme Hoffman, M. A. Diaz Gutierrez, M. Vogel Gonzalez, Y. Chi, X. He, G. Pei, S. Pei, G. Shu , et al. (493 additional authors not shown)

Abstract: The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-q… ▽ More The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-quark measurements. Subsequent stages will focus on measurements of rare Higgs processes, as well as searches for new physics processes and precision measurements of new states, e.g. states previously discovered at LHC or at CLIC itself. In the 2012 CLIC Conceptual Design Report, a fully optimised 3 TeV collider was presented, while the proposed lower energy stages were not studied to the same level of detail. This report presents an updated baseline staging scenario for CLIC. The scenario is the result of a comprehensive study addressing the performance, cost and power of the CLIC accelerator complex as a function of centre-of-mass energy and it targets optimal physics output based on the current physics landscape. The optimised staging scenario foresees three main centre-of-mass energy stages at 380 GeV, 1.5 TeV and 3 TeV for a full CLIC programme spanning 22 years. For the first stage, an alternative to the CLIC drive beam scheme is presented in which the main linac power is produced using X-band klystrons. △ Less

Submitted 27 March, 2017; v1 submitted 26 August, 2016; originally announced August 2016.

Comments: 57 pages, 27 figures, 12 tables, published as CERN Yellow Report. Updated version: Minor layout changes for print version

Report number: CERN-2016-004

Evidence for non-exponential elastic proton-proton differential cross-section at low |t| and sqrt(s) = 8 TeV by TOTEM

Authors: TOTEM Collaboration, G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, V. Berardi, M. Berretti, E. Bossini, U. Bottigli, M. Bozzo, A. Buzzo, F. S. Cafagna, C. E. Campanella, M. G. Catanesi, M. Csanád, T. Csörgő, M. Deile, F. De Leonardis, A. D'Orazio, M. Doubek, K. Eggert, V. Eremin, F. Ferro, A. Fiergolski , et al. (58 additional authors not shown)

Abstract: The TOTEM experiment has made a precise measurement of the elastic proton-proton differential cross-section at the centre-of-mass energy sqrt(s) = 8 TeV based on a high-statistics data sample obtained with the beta* = 90 optics. Both the statistical and systematic uncertainties remain below 1%, except for the t-independent contribution from the overall normalisation. This unprecedented precision a… ▽ More The TOTEM experiment has made a precise measurement of the elastic proton-proton differential cross-section at the centre-of-mass energy sqrt(s) = 8 TeV based on a high-statistics data sample obtained with the beta* = 90 optics. Both the statistical and systematic uncertainties remain below 1%, except for the t-independent contribution from the overall normalisation. This unprecedented precision allows to exclude a purely exponential differential cross-section in the range of four-momentum transfer squared 0.027 < |t| < 0.2 GeV^2 with a significance greater than 7 sigma. Two extended parametrisations, with quadratic and cubic polynomials in the exponent, are shown to be well compatible with the data. Using them for the differential cross-section extrapolation to t = 0, and further applying the optical theorem, yields total cross-section estimates of (101.5 +- 2.1) mb and (101.9 +- 2.1) mb, respectively, in agreement with previous TOTEM measurements. △ Less

Submitted 12 September, 2015; v1 submitted 27 March, 2015; originally announced March 2015.

Comments: Final version published in Nuclear Physics B

Report number: CERN-PH-EP-2015-083

Journal ref: Nuclear Physics B 899 (2015) 527-546

Measurement of the forward charged particle pseudorapidity density in pp collisions at sqrt(s) = 8 TeV using a displaced interaction point

Authors: The TOTEM Collaboration, G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, V. Berardi, M. Berretti, E. Bossini, U. Bottigli, M. Bozzo, E. Brücken, A. Buzzo, F. S. Cafagna, M. G. Catanesi, C. Covault, M. Csanád, T. Csörgő, M. Deile, M. Doubek, K. Eggert, V. Eremin, F. Ferro, A. Fiergolski, F. Garcia , et al. (54 additional authors not shown)

Abstract: The pseudorapidity density of charged particles dN(ch)/deta is measured by the TOTEM experiment in pp collisions at sqrt(s) = 8 TeV within the range 3.9 < eta < 4.7 and -6.95 < eta < -6.9. Data were collected in a low intensity LHC run with collisions occurring at a distance of 11.25 m from the nominal interaction point. The data sample is expected to include 96-97\% of the inelastic proton-proton… ▽ More The pseudorapidity density of charged particles dN(ch)/deta is measured by the TOTEM experiment in pp collisions at sqrt(s) = 8 TeV within the range 3.9 < eta < 4.7 and -6.95 < eta < -6.9. Data were collected in a low intensity LHC run with collisions occurring at a distance of 11.25 m from the nominal interaction point. The data sample is expected to include 96-97\% of the inelastic proton-proton interactions. The measurement reported here considers charged particles with p_T > 0 MeV/c, produced in inelastic interactions with at least one charged particle in -7 < eta < -6 or 3.7 < eta <4.8 . The dN(ch)/deta has been found to decrease with |eta|, from 5.11 +- 0.73 at eta = 3.95 to 1.81 +- 0.56 at eta= - 6.925. Several MC generators are compared to the data and are found to be within the systematic uncertainty of the measurement. △ Less

Submitted 18 November, 2014; originally announced November 2014.

Comments: 9 pages, 5 figures, submitted to EPJ C

Report number: CERN-PH-EP-2014-260

The Heavy Photon Search Test Detector

Authors: Marco Battaglieri, Sergey Boyarinov, Stephen Bueltmann, Volker Burkert, Andrea Celentano, Gabriel Charles, William Cooper, Chris Cuevas, Natalia Dashyan, Raffaella DeVita, Camille Desnault, Alexandre Deur, Hovanes Egiyan, Latifa Elouadrhiri, Rouven Essig, Vitaliy Fadeyev, Clive Field, Arne Freyberger, Yuri Gershtein, Nerses Gevorgyan, Francois-Xavier Girod, Norman Graf, Mathew Graham, Keith Griffioen, Alexander Grillo , et al. (39 additional authors not shown)

Abstract: The Heavy Photon Search (HPS), an experiment to search for a hidden sector photon in fixed target electroproduction, is preparing for installation at the Thomas Jefferson National Accelerator Facility (JLab) in the Fall of 2014. As the first stage of this project, the HPS Test Run apparatus was constructed and operated in 2012 to demonstrate the experiment's technical feasibility and to confirm th… ▽ More The Heavy Photon Search (HPS), an experiment to search for a hidden sector photon in fixed target electroproduction, is preparing for installation at the Thomas Jefferson National Accelerator Facility (JLab) in the Fall of 2014. As the first stage of this project, the HPS Test Run apparatus was constructed and operated in 2012 to demonstrate the experiment's technical feasibility and to confirm that the trigger rates and occupancies are as expected. This paper describes the HPS Test Run apparatus and readout electronics and its performance. In this setting, a heavy photon can be identified as a narrow peak in the e$^+$e$^-$ invariant mass spectrum, above the trident background or as a narrow invariant mass peak with a decay vertex displaced from the production target, so charged particle tracking and vertexing are needed for its detection. In the HPS Test Run, charged particles are measured with a compact forward silicon microstrip tracker inside a dipole magnet. Electromagnetic showers are detected in a PbW0$_{4}$ crystal calorimeter situated behind the magnet, and are used to trigger the experiment and identify electrons and positrons. Both detectors are placed close to the beam line and split top-bottom. This arrangement provides sensitivity to low-mass heavy photons, allows clear passage of the unscattered beam, and avoids the spray of degraded electrons coming from the target. The discrimination between prompt and displaced e$^+$e$^-$ pairs requires the first layer of silicon sensors be placed only 10~cm downstream of the target. The expected signal is small, and the trident background huge, so the experiment requires very large statistics. Accordingly, the HPS Test Run utilizes high-rate readout and data acquisition electronics and a fast trigger to exploit the essentially 100% duty cycle of the CEBAF accelerator at JLab. △ Less

Submitted 4 June, 2015; v1 submitted 23 June, 2014; originally announced June 2014.

Comments: Revised version to match published version, 16 pages, 18 figures, published in Nuclear Instruments and Methods in Physics Research Section A, editor: Per Hansson Adrian

Report number: SLAC-PUB-15999

Journal ref: Nuclear Inst. and Methods in Physics Research, A Volume 777, 21 March 2015, Pages 91-101, ISSN 0168-9002

LHC Optics Measurement with Proton Tracks Detected by the Roman Pots of the TOTEM Experiment

Authors: The TOTEM Collaboration, G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, V. Berardi, M. Berretti, E. Bossini, U. Bottigli, M. Bozzo, E. Brücken, A. Buzzo, F. S. Cafagna, M. G. Catanesi, C. Covault, M. Csanád, T. Csörgő, M. Deile, M. Doubek, K. Eggert, V. Eremin, F. Ferro, A. Fiergolski, F. Garcia , et al. (54 additional authors not shown)

Abstract: Precise knowledge of the beam optics at the LHC is crucial to fulfil the physics goals of the TOTEM experiment, where the kinematics of the scattered protons is reconstructed with the near-beam telescopes -- so-called Roman Pots (RP). Before being detected, the protons' trajectories are influenced by the magnetic fields of the accelerator lattice. Thus precise understanding of the proton transport… ▽ More Precise knowledge of the beam optics at the LHC is crucial to fulfil the physics goals of the TOTEM experiment, where the kinematics of the scattered protons is reconstructed with the near-beam telescopes -- so-called Roman Pots (RP). Before being detected, the protons' trajectories are influenced by the magnetic fields of the accelerator lattice. Thus precise understanding of the proton transport is of key importance for the experiment. A novel method of optics evaluation is proposed which exploits kinematical distributions of elastically scattered protons observed in the RPs. Theoretical predictions, as well as Monte Carlo studies, show that the residual uncertainty of this optics estimation method is smaller than 0.25 percent. △ Less

Submitted 2 June, 2014; originally announced June 2014.

Comments: 20 pages, 11 figures, 5 figures, to be submitted to New J. Phys

Report number: CERN-PH-EP-2014-066

Dark Sectors and New, Light, Weakly-Coupled Particles

Authors: R. Essig, J. A. Jaros, W. Wester, P. Hansson Adrian, S. Andreas, T. Averett, O. Baker, B. Batell, M. Battaglieri, J. Beacham, T. Beranek, J. D. Bjorken, F. Bossi, J. R. Boyce, G. D. Cates, A. Celentano, A. S. Chou, R. Cowan, F. Curciarello, H. Davoudiasl, P. deNiverville, R. De Vita, A. Denig, R. Dharmapalan, B. Dongwi , et al. (64 additional authors not shown)

Abstract: Dark sectors, consisting of new, light, weakly-coupled particles that do not interact with the known strong, weak, or electromagnetic forces, are a particularly compelling possibility for new physics. Nature may contain numerous dark sectors, each with their own beautiful structure, distinct particles, and forces. This review summarizes the physics motivation for dark sectors and the exciting oppo… ▽ More Dark sectors, consisting of new, light, weakly-coupled particles that do not interact with the known strong, weak, or electromagnetic forces, are a particularly compelling possibility for new physics. Nature may contain numerous dark sectors, each with their own beautiful structure, distinct particles, and forces. This review summarizes the physics motivation for dark sectors and the exciting opportunities for experimental exploration. It is the summary of the Intensity Frontier subgroup "New, Light, Weakly-coupled Particles" of the Community Summer Study 2013 (Snowmass). We discuss axions, which solve the strong CP problem and are an excellent dark matter candidate, and their generalization to axion-like particles. We also review dark photons and other dark-sector particles, including sub-GeV dark matter, which are theoretically natural, provide for dark matter candidates or new dark matter interactions, and could resolve outstanding puzzles in particle and astro-particle physics. In many cases, the exploration of dark sectors can proceed with existing facilities and comparatively modest experiments. A rich, diverse, and low-cost experimental program has been identified that has the potential for one or more game-changing discoveries. These physics opportunities should be vigorously pursued in the US and elsewhere. △ Less

Submitted 31 October, 2013; originally announced November 2013.

Comments: Report of the Community Summer Study 2013 (Snowmass) Intensity Frontier New, Light, Weakly-Coupled Particles subgroup

Performance of the TOTEM Detectors at the LHC

Authors: TOTEM Collaboration, G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, M. G. Bagliesi, V. Berardi, M. Berretti, E. Bossini, U. Bottigli, M. Bozzo, E. Brücken, A. Buzzo, F. S. Cafagna, M. G. Catanesi, R. Cecchi, C. Covault, M. Csanád, T. Csörgő, M. Deile, M. Doubek, K. Eggert, V. Eremin, F. Ferro , et al. (57 additional authors not shown)

Abstract: The TOTEM Experiment is designed to measure the total proton-proton cross-section with the luminosity-independent method and to study elastic and diffractive pp scattering at the LHC. To achieve optimum forward coverage for charged particles emitted by the pp collisions in the interaction point IP5, two tracking telescopes, T1 and T2, are installed on each side of the IP in the pseudorapidity regi… ▽ More The TOTEM Experiment is designed to measure the total proton-proton cross-section with the luminosity-independent method and to study elastic and diffractive pp scattering at the LHC. To achieve optimum forward coverage for charged particles emitted by the pp collisions in the interaction point IP5, two tracking telescopes, T1 and T2, are installed on each side of the IP in the pseudorapidity region 3.1 < = |eta | < = 6.5, and special movable beam-pipe insertions - called Roman Pots (RP) - are placed at distances of +- 147 m and +- 220 m from IP5. This article describes in detail the working of the TOTEM detector to produce physics results in the first three years of operation and data taking at the LHC. △ Less

Submitted 10 October, 2013; originally announced October 2013.

Comments: 40 pages, 31 figures, submitted to Int. J. Mod. Phys. A

Report number: CERN-PH-EP-2013-173

Journal ref: Int. J. Mod. Phys. A 28, 1330046 (2013)

Double diffractive cross-section measurement in the forward region at LHC

Authors: TOTEM Collaboration, G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, V. Berardi, M. Berretti, E. Bossini, U. Bottigli, M. Bozzo, E. Brücken, A. Buzzo, F. S. Cafagna, M. G. Catanesi, M. Csanád, T. Csörgő, M. Deile, K. Eggert, V. Eremin, F. Ferro, A. Fiergolski, F. Garcia, S. Giani, V. Greco , et al. (51 additional authors not shown)

Abstract: The first double diffractive cross-section measurement in the very forward region has been carried out by the TOTEM experiment at the LHC with center-of-mass energy of sqrt(s)=7 TeV. By utilizing the very forward TOTEM tracking detectors T1 and T2, which extend up to |eta|=6.5, a clean sample of double diffractive pp events was extracted. From these events, we measured the cross-section sigma_DD =… ▽ More The first double diffractive cross-section measurement in the very forward region has been carried out by the TOTEM experiment at the LHC with center-of-mass energy of sqrt(s)=7 TeV. By utilizing the very forward TOTEM tracking detectors T1 and T2, which extend up to |eta|=6.5, a clean sample of double diffractive pp events was extracted. From these events, we measured the cross-section sigma_DD =(116 +- 25) mub for events where both diffractive systems have 4.7 <|eta|_min < 6.5 . △ Less

Submitted 30 August, 2013; originally announced August 2013.

Comments: 5 pages, 1 figure, submitted for publication

Report number: CERN-PH-EP-2013-170

Journal ref: Phys. Rev. Lett. 111, 262001 (2013)

Measurement of the forward charged particle pseudorapidity density in pp collisions at sqrt{s} = 7 TeV with the TOTEM experiment

Authors: G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, V. Berardi, M. Berretti, E. Bossini, M. Bozzo, P. Brogi, E. Brücken, A. Buzzo, F. S. Cafagna, M. Calicchio, M. G. Catanesi, C. Covault, M. Csanád, T. Csörgő, M. Deile, K Eggert, V. Eremin, R. Ferretti, F. Ferro, A. Fiergolski, F. Garcia , et al. (51 additional authors not shown)

Abstract: The TOTEM experiment has measured the charged particle pseudorapidity density dN_{ch}/deta in pp collisions at sqrt{s} = 7 TeV for 5.3<|eta|<6.4 in events with at least one charged particle with transverse momentum above 40 MeV/c in this pseudorapidity range. This extends the analogous measurement performed by the other LHC experiments to the previously unexplored forward eta region. The measureme… ▽ More The TOTEM experiment has measured the charged particle pseudorapidity density dN_{ch}/deta in pp collisions at sqrt{s} = 7 TeV for 5.3<|eta|<6.4 in events with at least one charged particle with transverse momentum above 40 MeV/c in this pseudorapidity range. This extends the analogous measurement performed by the other LHC experiments to the previously unexplored forward eta region. The measurement refers to more than 99% of non-diffractive processes and to single and double diffractive processes with diffractive masses above ~3.4 GeV/c^2, corresponding to about 95% of the total inelastic cross-section. The dN_{ch}/deta has been found to decrease with |eta|, from 3.84 pm 0.01(stat) pm 0.37(syst) at |eta| = 5.375 to 2.38 pm 0.01(stat) pm 0.21(syst) at |eta| = 6.375. Several MC generators have been compared to data; none of them has been found to fully describe the measurement. △ Less

Submitted 18 May, 2012; originally announced May 2012.

Comments: 7 pages, 3 figures

Journal ref: EPL, 98 (2012) 31002

Elastic Scattering and Total Cross-Section in p+p reactions measured by the LHC Experiment TOTEM at sqrt(s) = 7 TeV

Authors: T. Csörgő, G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, V. Berardi, M. Berretti, E. Bossini, M. Bozzo, P. Brogi, E. Brücken, A. Buzzo, F. S. Cafagna, M. Calicchio, M. G. Catanesi, C. Covault, M. Csanád, M. Deile, E. Dimovasili, M. Doubek, K. Eggert, V. Eremin, R. Ferretti, F. Ferro , et al. (61 additional authors not shown)

Abstract: Proton-proton elastic scattering has been measured by the TOTEM experiment at the CERN Large Hadron Collider at $\sqrt{s} = 7 $ TeV in special runs with the Roman Pot detectors placed as close to the outgoing beam as seven times the transverse beam size. The differential cross-section measurements are reported in the |t|-range of 0.36 to 2.5 GeV^2. Extending the range of data to low t values from… ▽ More Proton-proton elastic scattering has been measured by the TOTEM experiment at the CERN Large Hadron Collider at $\sqrt{s} = 7 $ TeV in special runs with the Roman Pot detectors placed as close to the outgoing beam as seven times the transverse beam size. The differential cross-section measurements are reported in the |t|-range of 0.36 to 2.5 GeV^2. Extending the range of data to low t values from 0.02 to 0.33 GeV^2,and utilizing the luminosity measurements of CMS, the total proton-proton cross section at sqrt(s) = 7 TeV is measured to be (98.3 +- 0.2(stat) +- 2.8(syst)) mb. △ Less

Submitted 25 April, 2012; originally announced April 2012.

Comments: Proceedings of the XLI International Symposium on Multiparticle Dynamics. Accepted for publication in Prog. Theor. Phys

First measurement of the total proton-proton cross section at the LHC energy of {\surd} s =7 TeV

Authors: G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, V. Berardi, M. Berretti, E. Bossini, M. Bozzo, P. Brogi, E. Brücken, A. Buzzo, F. Cafagna, M. Calicchio, M. G. Catanesi, C. Covault, T. Csörgö, M. Deile, K. Eggert, V. Eremin, R. Ferretti, F. Ferro, A. Fiergolski, F. Garcia, S. Giani , et al. (49 additional authors not shown)

Abstract: TOTEM has measured the differential cross-section for elastic proton-proton scattering at the LHC energy of {\srud}s = 7TeV analysing data from a short run with dedicated large βべーた * optics. A single exponential fit with a slope B = (20:1{\pm}0:2stat {\pm}0:3syst)GeV-2 describes the range of the four-momentum transfer squared |t| from 0.02 to 0.33 GeV2. After the extrapolation to |t| = 0, a total el… ▽ More TOTEM has measured the differential cross-section for elastic proton-proton scattering at the LHC energy of {\srud}s = 7TeV analysing data from a short run with dedicated large βべーた * optics. A single exponential fit with a slope B = (20:1{\pm}0:2stat {\pm}0:3syst)GeV-2 describes the range of the four-momentum transfer squared |t| from 0.02 to 0.33 GeV2. After the extrapolation to |t| = 0, a total elastic scattering cross-section of (24:8{\pm}0:2stat {\pm}1:2syst) mb was obtained. Applying the optical theorem and using the luminosity measurement from CMS, a total proton-proton cross-section of (98:3{\pm}0:2stat {\pm}2:8syst) mb was deduced which is in good agreement with the expectation from the overall fit of previously measured data over a large range of center-of-mass energies. From the total and elastic pp cross-section measurements, an inelastic pp cross-section of (73:5{\pm}0:6stat +1:8 -1:3 syst) mb was inferred. PACS 13.60.Hb: Total and inclusive cross sections △ Less

Submitted 6 October, 2011; originally announced October 2011.

Comments: 11 pages 5 figures CERN PH Prerpint

Report number: CERN-PH-EP-2011-158, 24 September 2011

Proton-proton elastic scattering at the LHC energy of {\surd} = 7 TeV

Authors: The TOTEM Collaboration, G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, V. Berardi, M. Berretti, M. Bozzo, E. Brücken, A. Buzzo, F. Cafagna, M. Calicchio, M. G. Catanesi, C. Covault, M. Csanád, T. Csörgö, M. Deile, E. Dimovasili, M. Doubek, K. Eggert, V. Eremin, F. Ferro, A. Fiergolski, F. Garcia , et al. (58 additional authors not shown)

Abstract: Proton-proton elastic scattering has been measured by the TOTEM experiment at the CERN Large Hadron Collider at {\surd}s = 7 TeV in dedicated runs with the Roman Pot detectors placed as close as seven times the transverse beam size (sbeam) from the outgoing beams. After careful study of the accelerator optics and the detector alignment, |t|, the square of four-momentum transferred in the elastic s… ▽ More Proton-proton elastic scattering has been measured by the TOTEM experiment at the CERN Large Hadron Collider at {\surd}s = 7 TeV in dedicated runs with the Roman Pot detectors placed as close as seven times the transverse beam size (sbeam) from the outgoing beams. After careful study of the accelerator optics and the detector alignment, |t|, the square of four-momentum transferred in the elastic scattering process, has been determined with an uncertainty of d t = 0.1GeV p|t|. In this letter, first results of the differential cross section are presented covering a |t|-range from 0.36 to 2.5GeV2. The differential cross-section in the range 0.36 < |t| < 0.47 GeV2 is described by an exponential with a slope parameter B = (23.6{\pm}0.5stat {\pm}0.4syst)GeV-2, followed by a significant diffractive minimum at |t| = (0.53{\pm}0.01stat{\pm}0.01syst)GeV2. For |t|-values larger than ~ 1.5GeV2, the cross-section exhibits a power law behaviour with an exponent of -7.8_\pm} 0.3stat{\pm}0.1syst. When compared to predictions based on the different available models, the data show a strong discriminative power despite the small t-range covered. △ Less

Submitted 6 October, 2011; originally announced October 2011.

Comments: 12pages, 5 figures, CERN preprint

Report number: CERN-PH-EP-2011-101

Journal ref: Europhys.Lett. 95 (2011) 41001

First Results from the TOTEM Experiment

Authors: G. Latino, G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, V. Berardi, M. Berretti, E. Bossini, M. Bozzo, P. Brogi, E. Brucken, A. Buzzo, F. Cafagna, M. Calicchio, M. G. Catanesi, C. Covault, T. Csorgo, M. Deile, K. Eggert, V. Eremin, R. Ferretti, F. Ferro, A. Fiergolski, F. Garcia , et al. (49 additional authors not shown)

Abstract: The first physics results from the TOTEM experiment are here reported, concerning the measurements of the total, differential elastic, elastic and inelastic pp cross-section at the LHC energy of $\sqrt{s}$ = 7 TeV, obtained using the luminosity measurement from CMS. A preliminary measurement of the forward charged particle $ηいーた$ distribution is also shown. The first physics results from the TOTEM experiment are here reported, concerning the measurements of the total, differential elastic, elastic and inelastic pp cross-section at the LHC energy of $\sqrt{s}$ = 7 TeV, obtained using the luminosity measurement from CMS. A preliminary measurement of the forward charged particle $ηいーた$ distribution is also shown. △ Less

Submitted 5 October, 2011; originally announced October 2011.

Comments: Conference Proceeding. MPI@LHC 2010: 2nd International Workshop on Multiple Partonic Interactions at the LHC. Glasgow (UK), 29th of November to the 3rd of December 2010

Search for a new gauge boson in the $A'$ Experiment (APEX)

Authors: S. Abrahamyan, Z. Ahmed, K. Allada, D. Anez, T. Averett, A. Barbieri, K. Bartlett, J. Beacham, J. Bono, J. R. Boyce, P. Brindza, A. Camsonne, K. Cranmer, M. M. Dalton, C. W. deJager, J. Donaghy, R. Essig, C. Field, E. Folts, A. Gasparian, N. Goeckner-Wald, J. Gomez, M. Graham, J. -O. Hansen, D. W. Higinbotham , et al. (41 additional authors not shown)

Abstract: We present a search at Jefferson Laboratory for new forces mediated by sub-GeV vector bosons with weak coupling $αあるふぁ'$ to electrons. Such a particle $A'$ can be produced in electron-nucleus fixed-target scattering and then decay to an $e^+e^-$ pair, producing a narrow resonance in the QED trident spectrum. Using APEX test run data, we searched in the mass range 175--250 MeV, found no evidence for an… ▽ More We present a search at Jefferson Laboratory for new forces mediated by sub-GeV vector bosons with weak coupling $αあるふぁ'$ to electrons. Such a particle $A'$ can be produced in electron-nucleus fixed-target scattering and then decay to an $e^+e^-$ pair, producing a narrow resonance in the QED trident spectrum. Using APEX test run data, we searched in the mass range 175--250 MeV, found no evidence for an $A'\to e^+e^-$ reaction, and set an upper limit of $αあるふぁ'/αあるふぁ\simeq 10^{-6}$. Our findings demonstrate that fixed-target searches can explore a new, wide, and important range of masses and couplings for sub-GeV forces. △ Less

Submitted 21 August, 2011; v1 submitted 12 August, 2011; originally announced August 2011.

Comments: 5 pages, 5 figures, references added

Report number: JLAB-PHY-11-1406 / SLAC-PUB-14491

The UA9 experimental layout

Authors: W. Scandale, G. Arduini, R. Assmann, C. Bracco, F. Cerutti, J. Christiansen, S. Gilardoni, E. Laface, R. Losito, A. Masi, E. Metral, D. Mirarchi, S. Montesano, V. Previtali, S. Redaelli, G. Valentino, P. Schoofs, G. Smirnov, L. Tlustos, E. Bagli, S. Baricordi, P. Dalpiaz, V. Guidi, A. Mazzolari, D. Vincenzi , et al. (36 additional authors not shown)

Abstract: The UA9 experimental equipment was installed in the CERN-SPS in March '09 with the aim of investigating crystal assisted collimation in coasting mode. Its basic layout comprises silicon bent crystals acting as primary collimators mounted inside two vacuum vessels. A movable 60 cm long block of tungsten located downstream at about 90 degrees phase advance intercepts the deflected beam. Scintill… ▽ More The UA9 experimental equipment was installed in the CERN-SPS in March '09 with the aim of investigating crystal assisted collimation in coasting mode. Its basic layout comprises silicon bent crystals acting as primary collimators mounted inside two vacuum vessels. A movable 60 cm long block of tungsten located downstream at about 90 degrees phase advance intercepts the deflected beam. Scintillators, Gas Electron Multiplier chambers and other beam loss monitors measure nuclear loss rates induced by the interaction of the beam halo in the crystal. Roman pots are installed in the path of the deflected particles and are equipped with a Medipix detector to reconstruct the transverse distribution of the impinging beam. Finally UA9 takes advantage of an LHC-collimator prototype installed close to the Roman pot to help in setting the beam conditions and to analyze the efficiency to deflect the beam. This paper describes in details the hardware installed to study the crystal collimation during 2010. △ Less

Submitted 29 June, 2011; originally announced June 2011.

Comments: 15pages, 11 figure, submitted to JINST

Proceedings of the workshop: HERA and the LHC workshop series on the implications of HERA for LHC physics

Authors: H. Jung, A. De Roeck, Z. J. Ajaltouni, S. Albino, G. Altarelli, F. Ambroglini, J. Anderson, G. Antchev, M. Arneodo, P. Aspell, V. Avati, M. Bahr, A. Bacchetta, M. G. Bagliesi, R. D. Ball, A. Banfi, S. Baranov, P. Bartalini, J. Bartels, F. Bechtel, V. Berardi, M. Berretti, G. Beuf, M. Biasini, I. Bierenbaum , et al. (244 additional authors not shown)

Abstract: 2nd workshop on the implications of HERA for LHC physics. Working groups: Parton Density Functions Multi-jet final states and energy flows Heavy quarks (charm and beauty) Diffraction Cosmic Rays Monte Carlos and Tools 2nd workshop on the implications of HERA for LHC physics. Working groups: Parton Density Functions Multi-jet final states and energy flows Heavy quarks (charm and beauty) Diffraction Cosmic Rays Monte Carlos and Tools △ Less

Submitted 30 March, 2009; v1 submitted 23 March, 2009; originally announced March 2009.

Comments: 2nd workshop on the implications of HERA for LHC physics 2006 - 2008, Hamburg - Geneva. H. Jung and A. De Roeck Editors

Report number: DESY-PROC-2009-02

Diffraction at TOTEM

Authors: G. Antchev, P. Aspell, V. Avati, M. G. Bagliesi, V. Berardi, M. Berretti, U. Bottigli, M. Bozzo, E. Brucken, A. Buzzo, F. Cafagna, M. Calicchio, M. G. Catanesi, P. L. Catastini, R. Cecchi, M. A. Ciocci, M. Deile, E. Dimovasili, K. Eggert, V. Eremin, F. Ferro, F. Garcia, S. Giani, V. Greco, J. Heino , et al. (50 additional authors not shown)

Abstract: The TOTEM experiment at the LHC measures the total proton-proton cross section with the luminosity-independent method and the elastic proton-proton cross-section over a wide |t|-range. It also performs a comprehensive study of diffraction, spanning from cross-section measurements of individual diffractive processes to the analysis of their event topologies. Hard diffraction will be studied in co… ▽ More The TOTEM experiment at the LHC measures the total proton-proton cross section with the luminosity-independent method and the elastic proton-proton cross-section over a wide |t|-range. It also performs a comprehensive study of diffraction, spanning from cross-section measurements of individual diffractive processes to the analysis of their event topologies. Hard diffraction will be studied in collaboration with CMS taking advantage of the large common rapidity coverage for charged and neutral particle detection and the large variety of trigger possibilities even at large luminosities. TOTEM will take data under all LHC beam conditions including standard high luminosity runs to maximize its physics reach. This contribution describes the main features of the TOTEM physics programme including measurements to be made in the early LHC runs. In addition, a novel scheme to extend the diffractive proton acceptance for high luminosity runs by installing proton detectors at IP3 is described. △ Less

Submitted 17 December, 2008; originally announced December 2008.

Comments: 10 pages, 9 figures, contribution to the proceedings of the HERA and the LHC workshop 2007-08

Beam Coupling Impedance Measurement and Mitigation for a TOTEM Roman Pot

Authors: Mario Deile, Fritz Caspers, Tom Kroyer, Marco Oriunno, Ernst Radermacher, Federico Roncarolo, Anna Soter

Abstract: The longitudinal and transverse beam coupling impedance of the first final TOTEM Roman Pot unit has been measured in the laboratory with the wire method. For the evaluation of transverse impedance the wire position has been kept constant, and the insertions of the RP were moved asymmetrically. With the original configuration of the RP, resonances with fairly high Q values were observed. In order… ▽ More The longitudinal and transverse beam coupling impedance of the first final TOTEM Roman Pot unit has been measured in the laboratory with the wire method. For the evaluation of transverse impedance the wire position has been kept constant, and the insertions of the RP were moved asymmetrically. With the original configuration of the RP, resonances with fairly high Q values were observed. In order to mitigate this problem, RF-absorbing ferrite plates were mounted in appropriate locations. As a result, all resonances were sufficiently damped to meet the stringent LHC beam coupling impedance requirements. △ Less

Submitted 30 June, 2008; originally announced June 2008.

Comments: 3 pages, 8 figures, proceedings of the 11th European Particle Accelerator Conference (EPAC08), Genova, Italy, June 2008

Journal ref: Conf.Proc.C0806233:tupp029,2008