-
Identification of graphite with perfect rhombohedral stacking by electronic Raman scattering
Authors:
András Pálinkás,
Krisztián Márity,
Konrád Kandrai,
Zoltán Tajkov,
Martin Gmitra,
Péter Vancsó,
Levente Tapasztó,
Péter Nemes-Incze
Abstract:
Rhombohedral graphite (RG) shows strong correlations in its topological flat band and is pivotal for exploring emergent, correlated electronic phenomena. One key advantage is the enhancement of electronic interactions with the increase in the number of rhombohedrally stacked graphene layers. Increasing thickness also leads to an exponential increase in the number of stacking faults, necessitating…
▽ More
Rhombohedral graphite (RG) shows strong correlations in its topological flat band and is pivotal for exploring emergent, correlated electronic phenomena. One key advantage is the enhancement of electronic interactions with the increase in the number of rhombohedrally stacked graphene layers. Increasing thickness also leads to an exponential increase in the number of stacking faults, necessitating a precise method to identify flawless rhombohedral stacking. Overcoming this challenge is difficult because the established technique for stacking sequence identification, based on the Raman 2D peak, fails in thick RG samples. We demonstrate that the strong layer dependence of the band structure can be harnessed to identify RG without stacking faults, or alternatively, to detect their presence. For thicknesses ranging from 3 to 12 layers, we show that each perfect RG structure presents distinctive peak positions in electronic Raman scattering (ERS). This measurement can be carried out using a conventional confocal Raman spectrometer at room temperature, using visible excitation wavelengths. Consequently, this overcomes the identification challenge by providing a simple and fast optical measurement technique, thereby helping to establish RG as a platform for studying strong correlations in one of the simplest crystals possible.
△ Less
Submitted 5 April, 2024; v1 submitted 31 January, 2024;
originally announced January 2024.
-
The composition and structure of the ubiquitous hydrocarbon contamination on van der Waals materials
Authors:
András Pálinkás,
György Kálvin,
Péter Vancsó,
Konrád Kandrai,
Márton Szendrő,
Gergely Németh,
Miklós Németh,
Áron Pekker,
József S. Pap,
Péter Petrik,
Katalin Kamarás,
Levente Tapasztó,
Péter Nemes-Incze
Abstract:
The behavior of single layer van der Waals (vdW) materials is profoundly influenced by the immediate atomic environment at their surface, a prime example being the myriad of emergent properties in artificial heterostructures. Equally significant are adsorbates deposited onto their surface from ambient. While vdW interfaces are well understood, our knowledge regarding atmospheric contamination is s…
▽ More
The behavior of single layer van der Waals (vdW) materials is profoundly influenced by the immediate atomic environment at their surface, a prime example being the myriad of emergent properties in artificial heterostructures. Equally significant are adsorbates deposited onto their surface from ambient. While vdW interfaces are well understood, our knowledge regarding atmospheric contamination is severely limited. Here we show that the common ambient contamination on the surface of: graphene, graphite, hBN and MoS2 is composed of a self-organized molecular layer, which forms during a few days of ambient exposure. Using low-temperature STM measurements we image the atomic structure of this adlayer and in combination with infrared spectroscopy identify the contaminant molecules as normal alkanes with lengths of 20-26 carbon atoms. Through its ability to self-organize, the alkane layer displaces the manifold other airborne contaminant species, capping the surface of vdW materials and possibly dominating their interaction with the environment.
△ Less
Submitted 9 November, 2022; v1 submitted 3 July, 2022;
originally announced July 2022.
-
Observation of competing, correlated ground states in the flat band of rhombohedral graphite
Authors:
Imre Hagymási,
Mohammad Syahid Mohd Isa,
Zoltán Tajkov,
Krisztián Márity,
Oroszlány László,
János Koltai,
Assem Alassaf,
Péter Kun,
Konrád Kandrai,
András Pálinkás,
Péter Vancsó,
Levente Tapasztó,
Péter Nemes-Incze
Abstract:
In crystalline solids the interactions of charge and spin can result in a variety of emergent quantum ground states, especially in partially filled, topological flat bands such as Landau levels or in 'magic-angle' bilayer graphene. Much less explored is rhombohedral graphite (RG), perhaps the simplest and structurally most perfect condensed matter system to host a flat band protected by symmetry.…
▽ More
In crystalline solids the interactions of charge and spin can result in a variety of emergent quantum ground states, especially in partially filled, topological flat bands such as Landau levels or in 'magic-angle' bilayer graphene. Much less explored is rhombohedral graphite (RG), perhaps the simplest and structurally most perfect condensed matter system to host a flat band protected by symmetry. By scanning tunneling microscopy we map the flat band charge density of 8, 10 and 17 layers and identify a domain structure emerging from a competition between a sublattice antiferromagnetic insulator and a gapless correlated paramagnet. Our density-matrix renormalization group calculations explain the observed features and demonstrate that the correlations are fundamentally different from graphene based magnetism identified until now, forming the ground state of a quantum magnet. Our work establishes RG as a new platform to study many-body interactions beyond the mean-field approach, where quantum fluctuations and entanglement dominate.
△ Less
Submitted 15 July, 2022; v1 submitted 26 January, 2022;
originally announced January 2022.
-
Anisotropic strain effects in small-twist-angle graphene on graphite
Authors:
Márton Szendrő,
András Pálinkás,
Péter Süle,
Zoltán Osváth
Abstract:
The direct experimental probing of locally varying lattice parameters and anisotropic lattice deformations in atomic multilayers is extremely challenging. Here, we develop a new combined numerical/graphical method for the analysis of irregular moiré superstructures measured by scanning tunneling microscopy (STM) on a small-twist-angle ($\sim$0.6$^{\circ}$) graphene on highly oriented pyrolytic gra…
▽ More
The direct experimental probing of locally varying lattice parameters and anisotropic lattice deformations in atomic multilayers is extremely challenging. Here, we develop a new combined numerical/graphical method for the analysis of irregular moiré superstructures measured by scanning tunneling microscopy (STM) on a small-twist-angle ($\sim$0.6$^{\circ}$) graphene on highly oriented pyrolytic graphite (gr/HOPG). We observe distorted moiré patterns with a spatially varying period in annealed gr/HOPG. The nanoscale modulation of the moiré period observed by STM reflects a locally strained (and sheared) graphene with anisotropic variation of the lattice parameters. We use a specific algorithm based on a rigid lattice Fourier method, which is able to reconstruct the irregular and distorted moiré patterns emerging from strain-induced lattice deformations. Our model is universal and can be used to study different moiré patterns occurring in two-dimensional van der Waals heterostructures. Additionally, room temperature scanning tunneling spectroscopy measurements show electronic states at the Dirac point, localized on moiré hills, which increase significantly the apparent corrugation of the moiré pattern. The measured topography is compared to classical molecular dynamics simulations. Density functional theory (DFT) calculations confirm that an AAB stacked trilayer region itself can contribute electronic states near the Fermi-level, in agreement with the measured peak in the local density of states. Furthermore, CMD calculations reveal direction-dependent bond alternations ($\sim$0.5$\%$) around the stacking regions, induced by shear strain, which could influence electronic properties.
△ Less
Submitted 26 August, 2019;
originally announced August 2019.
-
Vapour sensing properties of graphene-covered gold nanoparticles
Authors:
Gábor Piszter,
Krisztián Kertész,
György Molnár,
András Pálinkás,
András Deák,
Zoltán Osváth
Abstract:
We investigated the vapour sensing properties of different graphene-gold hybrid nanostructures. We observed the shifts in the optical spectra near the local surface plasmon resonance of the gold nanoparticles by changing the concentration and nature of the analytes (ethanol, 2-propanol, and toluene). The smaller, dome-like gold nanoparticles proved to be more sensitive to these vapours compared to…
▽ More
We investigated the vapour sensing properties of different graphene-gold hybrid nanostructures. We observed the shifts in the optical spectra near the local surface plasmon resonance of the gold nanoparticles by changing the concentration and nature of the analytes (ethanol, 2-propanol, and toluene). The smaller, dome-like gold nanoparticles proved to be more sensitive to these vapours compared to slightly larger, flat nanoparticles. We investigated how the optical response of the gold nanoparticles can be tuned with a corrugated graphene overlayer. We showed that the presence of graphene increased the sensitivity to ethanol and 2-propanol, while it decreased it towards toluene exposure (at concentrations higher than 30%). The slope changes observed on the optical response curves were discussed in the framework of capillary condensation. These results can have potential impact on the development of new sensors based on graphene-gold hybrids.
△ Less
Submitted 20 May, 2019;
originally announced May 2019.
-
Dynamic strain in gold nanoparticle supported graphene induced by focused laser irradiation
Authors:
András Pálinkás,
Péter Kun,
Antal A. Koós,
Zoltán Osváth
Abstract:
Graphene on noble-metal nanostructures constitutes an attractive nanocomposite with possible applications in sensors or energy conversion. In this work we study the properties of hybrid graphene/gold nanoparticle structures by Raman spectroscopy and Scanning Probe Methods. The nanoparticles (NPs) were prepared by local annealing of gold thin films using focused laser beam. The method resulted in a…
▽ More
Graphene on noble-metal nanostructures constitutes an attractive nanocomposite with possible applications in sensors or energy conversion. In this work we study the properties of hybrid graphene/gold nanoparticle structures by Raman spectroscopy and Scanning Probe Methods. The nanoparticles (NPs) were prepared by local annealing of gold thin films using focused laser beam. The method resulted in a patterned surface, with NPs formed at arbitrarily chosen microscale areas. Graphene grown by chemical vapour deposition was transferred onto the prepared, closely spaced gold NPs. While we found that successive higher intensity (6 mW) laser irradiation increased gradually the doping and the defect concentration in SiO2 supported graphene, the same irradiation procedure did not induce such irreversible effects in the graphene supported by gold NPs. Moreover, the laser irradiation induced dynamic hydrostatic strain in the graphene on Au NPs, which turned out to be completely reversible. These results can have implications in the development of graphene/plasmonic nanoparticle based high temperature sensors operating in dynamic regimes.
△ Less
Submitted 12 June, 2018;
originally announced June 2018.
-
Novel graphene/Sn and graphene/SnOx hybrid nanostructures: Induced superconductivity and band gaps revealed by scanning probe measurements
Authors:
András Pálinkás,
György Molnár,
Gábor Zsolt Magda,
Chanyong Hwang,
Levente Tapasztó,
Peter Samuely,
Pavol Szabó,
Zoltán Osváth
Abstract:
The development of functional composite nanomaterials based on graphene and metal nanoparticles (NPs) is currently the subject of intense research interest. In this study we report the preparation of novel type of graphene/Sn and graphene/SnOx (1 < x < 2) hybrid nanostructures and their investigation by scanning probe methods. First, we prepare Sn NPs by evaporating 7 - 8 nm tin on highly oriented…
▽ More
The development of functional composite nanomaterials based on graphene and metal nanoparticles (NPs) is currently the subject of intense research interest. In this study we report the preparation of novel type of graphene/Sn and graphene/SnOx (1 < x < 2) hybrid nanostructures and their investigation by scanning probe methods. First, we prepare Sn NPs by evaporating 7 - 8 nm tin on highly oriented pyrolytic graphite substrates. Graphene/Sn nanostructures are obtained by transferring graphene on top of the tin NPs immediately after evaporation. We show by scanning tunnelling microscopy (STM) and spectroscopy (STS) that tin NPs reduce significantly the environmental p-type doping of graphene. Furthermore, we demonstrate by low-temperature STM and STS measurements that superconductivity is induced in graphene, either directly supported by Sn NPs or suspended between them. Additionally, we prepare SnOx NPs by annealing the evaporated tin at 500 ${^o}$C. STS measurements performed on hybrid graphene/SnOx nanostructures reveal the electronic band gap of SnOx NPs. The results can open new avenues for the fabrication of novel hybrid superconducting nanomaterials with designed structures and morphologies.
△ Less
Submitted 13 September, 2017;
originally announced September 2017.
-
Interaction effects in a chaotic graphene quantum billiard
Authors:
Imre Hagymasi,
Peter Vancso,
Andras Palinkas,
Zoltan Osvath
Abstract:
We investigate the local electronic structure of a Sinai-like, quadrilateral graphene quantum billiard with zigzag and armchair edges using scanning tunneling microscopy at room temperature. It is revealed that besides the $(\sqrt{3}\times\sqrt{3})R30$° superstructure, which is caused by the intervalley scattering, its overtones also appear in the STM measurements, which are attributed to the Umkl…
▽ More
We investigate the local electronic structure of a Sinai-like, quadrilateral graphene quantum billiard with zigzag and armchair edges using scanning tunneling microscopy at room temperature. It is revealed that besides the $(\sqrt{3}\times\sqrt{3})R30$° superstructure, which is caused by the intervalley scattering, its overtones also appear in the STM measurements, which are attributed to the Umklapp processes. We point out that these results can be well understood by taking into account the Coulomb interaction in the quantum billiard, accounting for both the measured density of state values and the experimentally observed topography patterns. The analysis of the level-spacing distribution substantiates the experimental findings as well. We also reveal the magnetic properties of our system which should be relevant in future graphene based electronic and spintronic applications.
△ Less
Submitted 27 January, 2017;
originally announced January 2017.
-
Determination of the STM tip-graphene repulsive forces by comparative STM and AFM measurements on suspended graphene
Authors:
András Pálinkás,
György Molnár,
Chanyong Hwang,
László Péter Biró,
Zoltán Osváth
Abstract:
Graphene grown by chemical vapour deposition is transferred on top of flat gold nanoislands and characterized by scanning tunnelling microscopy (STM) and atomic force microscopy (AFM). Graphene bubbles are formed with lateral dimensions determined by the size and shape of nanoislands. These graphene bubbles can be squeezed during STM imaging using bias voltages of less than 250 mV and tunnelling c…
▽ More
Graphene grown by chemical vapour deposition is transferred on top of flat gold nanoislands and characterized by scanning tunnelling microscopy (STM) and atomic force microscopy (AFM). Graphene bubbles are formed with lateral dimensions determined by the size and shape of nanoislands. These graphene bubbles can be squeezed during STM imaging using bias voltages of less than 250 mV and tunnelling currents of 1 nA. Similarly, the graphene suspended over gold nanovoids is deflected 4 - 5 nm by the STM tip when imaging at low bias voltages (U = 30 mV). Nanoindentation measurements performed by AFM show that the squeezing of graphene bubbles occurs at repulsive forces of 20 - 35 nN, and such forces can result in deflections of several nanometres in suspended graphene parts, respectively. Comparing the AFM and STM results, this study reveals that mechanical forces of the order of 10e-8 N occur between the STM tip and graphene under ambient imaging conditions and typical tunnelling parameters.
△ Less
Submitted 14 September, 2016;
originally announced September 2016.
-
Moiré superlattices in strained graphene-gold hybrid nanostructures
Authors:
András Pálinkás,
Péter Süle,
Márton Szendrő,
György Molnár,
Chanyong Hwang,
László P. Biró,
Zoltán Osváth
Abstract:
Graphene-metal nanoparticle hybrid materials potentially display not only the unique properties of metal nanoparticles and those of graphene, but also additional novel properties due to the interaction between graphene and nanoparticles. This study shows that gold nanoislands can be used to tailor the local electronic properties of graphene. Graphene on crystalline gold nanoislands exhibits moiré…
▽ More
Graphene-metal nanoparticle hybrid materials potentially display not only the unique properties of metal nanoparticles and those of graphene, but also additional novel properties due to the interaction between graphene and nanoparticles. This study shows that gold nanoislands can be used to tailor the local electronic properties of graphene. Graphene on crystalline gold nanoislands exhibits moiré superlattices, which generate secondary Dirac points in the local density of states. Conversely, the graphene covered gold regions undergo a polycrystalline to Au(111) phase transition upon annealing. Moreover, the nanoscale coexistence of moiré superlattices with different moiré periodicities has also been revealed. Several of these moiré periodicities are anomalously large, which cannot be explained by the standard lattice mismatch between the graphene and the topmost Au(111) layers. Density functional theory and molecular dynamics simulations show for the first time that in such cases the graphene and the interfacial metallic layer is strained, leading to distorted lattice constants, and consequently to reduced misfit. Room temperature charge localization induced by a large wavelength moiré pattern is also observed by scanning tunneling spectroscopy. These findings can open a route towards the strain engineering of graphene/metal interfaces with various moiré superlattices and tailored electronic properties for nanoscale information coding.
△ Less
Submitted 30 June, 2016;
originally announced June 2016.