-
Report on the Advanced Linear Collider Study Group (ALEGRO) Workshop 2024
Authors:
J. Vieira,
B. Cros,
P. Muggli,
I. A. Andriyash,
O. Apsimon,
M. Backhouse,
C. Benedetti,
S. S. Bulanov,
A. Caldwell,
Min Chen,
V. Cilento,
S. Corde,
R. D'Arcy,
S. Diederichs,
E. Ericson,
E. Esarey,
J. Farmer,
L. Fedeli,
A. Formenti,
B. Foster,
M. Garten,
C. G. R. Geddes,
T. Grismayer,
M. J. Hogan,
S. Hooker
, et al. (19 additional authors not shown)
Abstract:
The workshop focused on the application of ANAs to particle physics keeping in mind the ultimate goal of a collider at the energy frontier (10\,TeV, e$^+$/e$^-$, e$^-$/e$^-$, or $γγ$). The development of ANAs is conducted at universities and national laboratories worldwide. The community is thematically broad and diverse, in particular since lasers suitable for ANA research (multi-hundred-terawatt…
▽ More
The workshop focused on the application of ANAs to particle physics keeping in mind the ultimate goal of a collider at the energy frontier (10\,TeV, e$^+$/e$^-$, e$^-$/e$^-$, or $γγ$). The development of ANAs is conducted at universities and national laboratories worldwide. The community is thematically broad and diverse, in particular since lasers suitable for ANA research (multi-hundred-terawatt peak power, a few tens of femtosecond-long pulses) and acceleration of electrons to hundreds of mega electron volts to multi giga electron volts became commercially available. The community spans several continents (Europe, America, Asia), including more than 62 laboratories in more than 20 countries. It is among the missions of the ICFA-ANA panel to feature the amazing progress made with ANAs, to provide international coordination and to foster international collaborations towards a future HEP collider. The scope of this edition of the workshop was to discuss the recent progress and necessary steps towards realizing a linear collider for particle physics based on novel-accelerator technologies (laser or beam driven in plasma or structures). Updates on the relevant aspects of the European Strategy for Particle Physics (ESPP) Roadmap Process as well as of the P5 (in the US) were presented, and ample time was dedicated to discussions. The major outcome of the workshop is the decision for ALEGRO to coordinate efforts in Europe, in the US, and in Asia towards a pre-CDR for an ANA-based, 10\,TeV CM collider. This goal of this coordination is to lead to a funding proposal to be submitted to both EU and EU/US funding agencies. This document presents a summary of the workshop, as seen by the co-chairs, as well as short 'one-pagers' written by the presenters at the workshop.
△ Less
Submitted 15 August, 2024; v1 submitted 6 August, 2024;
originally announced August 2024.
-
Four-Dimensional Phase-Space Reconstruction of Flat and Magnetized Beams Using Neural Networks and Differentiable Simulations
Authors:
Seongyeol Kim,
Juan Pablo Gonzalez-Aguilera,
Philippe Piot,
Gongxiaohui Chen,
Scott Doran,
Young-Kee Kim,
Wanming Liu,
Charles Whiteford,
Eric Wisniewski,
Auralee Edelen,
Ryan Roussel,
John Power
Abstract:
Beams with cross-plane coupling or extreme asymmetries between the two transverse phase spaces are often encountered in particle accelerators. Flat beams with large transverse-emittance ratios are critical for future linear colliders. Similarly, magnetized beams with significant cross-plane coupling are expected to enhance the performance of electron cooling in hadron beams. Preparing these beams…
▽ More
Beams with cross-plane coupling or extreme asymmetries between the two transverse phase spaces are often encountered in particle accelerators. Flat beams with large transverse-emittance ratios are critical for future linear colliders. Similarly, magnetized beams with significant cross-plane coupling are expected to enhance the performance of electron cooling in hadron beams. Preparing these beams requires precise control and characterization of the four-dimensional transverse phase space. In this study, we employ generative phase space reconstruction (GPSR) techniques to rapidly characterize magnetized and flat-beam phase-space distributions using a conventional quadrupole-scan method. The reconstruction technique is experimentally demonstrated on an electron beam produced at the Argonne Wakefield Accelerator and successfully benchmarked against conventional diagnostics techniques. Specifically, we show that predicted beam parameters from the reconstructed phase-space distributions (e.g. as magnetization and flat beam emittances) are in excellent agreement with those measured from the conventional diagnostic methods.
△ Less
Submitted 23 July, 2024; v1 submitted 28 February, 2024;
originally announced February 2024.
-
MetaHate: A Dataset for Unifying Efforts on Hate Speech Detection
Authors:
Paloma Piot,
Patricia Martín-Rodilla,
Javier Parapar
Abstract:
Hate speech represents a pervasive and detrimental form of online discourse, often manifested through an array of slurs, from hateful tweets to defamatory posts. As such speech proliferates, it connects people globally and poses significant social, psychological, and occasionally physical threats to targeted individuals and communities. Current computational linguistic approaches for tackling this…
▽ More
Hate speech represents a pervasive and detrimental form of online discourse, often manifested through an array of slurs, from hateful tweets to defamatory posts. As such speech proliferates, it connects people globally and poses significant social, psychological, and occasionally physical threats to targeted individuals and communities. Current computational linguistic approaches for tackling this phenomenon rely on labelled social media datasets for training. For unifying efforts, our study advances in the critical need for a comprehensive meta-collection, advocating for an extensive dataset to help counteract this problem effectively. We scrutinized over 60 datasets, selectively integrating those pertinent into MetaHate. This paper offers a detailed examination of existing collections, highlighting their strengths and limitations. Our findings contribute to a deeper understanding of the existing datasets, paving the way for training more robust and adaptable models. These enhanced models are essential for effectively combating the dynamic and complex nature of hate speech in the digital realm.
△ Less
Submitted 12 January, 2024;
originally announced January 2024.
-
Workshop on a future muon program at FNAL
Authors:
S. Corrodi,
Y. Oksuzian,
A. Edmonds,
J. Miller,
H. N. Tran,
R. Bonventre,
D. N. Brown,
F. Meot,
V. Singh,
Y. Kolomensky,
S. Tripathy,
L. Borrel,
M. Bub,
B. Echenard,
D. G. Hitlin,
H. Jafree,
S. Middleton,
R. Plestid,
F. C. Porter,
R. Y. Zhu,
L. Bottura,
E. Pinsard,
A. M. Teixeira,
C. Carelli,
D. Ambrose
, et al. (68 additional authors not shown)
Abstract:
The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e…
▽ More
The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e.g., muon collider). Topics included high-power targetry, status of R&D for Mu2e-II, development of compressor rings, FFA and concepts for muon experiments (conversion, decays, muonium and other opportunities) at AMF. This document summarizes the workshop discussions with a focus on future R&D tasks needed to realize these concepts.
△ Less
Submitted 11 September, 2023;
originally announced September 2023.
-
Observation of Skewed Electromagnetic Wakefields in an Asymmetric Structure Driven by Flat Electron Bunches
Authors:
Walter Lynn,
Tianzhe Xu,
Gerard Andonian,
Scott Doran,
Gwanghui Ha,
Nathan Majernik,
Philippe Piot,
John Power,
James Rosenzweig,
Charles Whiteford,
Eric Wisniewski
Abstract:
Relativistic charged-particle beams which generate intense longitudinal fields in accelerating structures also inherently couple to transverse modes. The effects of this coupling may lead to beam break-up instability, and thus must be countered to preserve beam quality in applications such as linear colliders. Beams with highly asymmetric transverse sizes (flat-beams) have been shown to suppress t…
▽ More
Relativistic charged-particle beams which generate intense longitudinal fields in accelerating structures also inherently couple to transverse modes. The effects of this coupling may lead to beam break-up instability, and thus must be countered to preserve beam quality in applications such as linear colliders. Beams with highly asymmetric transverse sizes (flat-beams) have been shown to suppress the initial instability in slab-symmetric structures. However, as the coupling to transverse modes remains, this solution serves only to delay instability. In order to understand the hazards of transverse coupling in such a case, we describe here an experiment characterizing the transverse effects on a flat-beam, traversing near a planar dielectric lined structure. The measurements reveal the emergence of a previously unobserved skew-quadrupole-like interaction when the beam is canted transversely, which is not present when the flat-beam travels parallel to the dielectric surface. We deploy a multipole field fitting algorithm to reconstruct the projected transverse wakefields from the data. We generate the effective kick vector map using a simple two-particle theoretical model, with particle-in-cell simulations used to provide further insight for realistic particle distributions.
△ Less
Submitted 17 August, 2023;
originally announced August 2023.
-
Single-shot Transverse Wakefield Mapping with a Hollow Electron Beam
Authors:
A. Halavanau,
P. Piot,
S. S. Baturin
Abstract:
Beam-driven wakefield accelerators are foreseen to enable compact accelerator-based light sources and play a critical role in future linear-collider concepts. This class of wakefield acceleration has been extensively studied over the last four decades with a focus on demonstrating its ability to support high-accelerating gradient and, most recently, enhanced transformer ratios. Yet, the associated…
▽ More
Beam-driven wakefield accelerators are foreseen to enable compact accelerator-based light sources and play a critical role in future linear-collider concepts. This class of wakefield acceleration has been extensively studied over the last four decades with a focus on demonstrating its ability to support high-accelerating gradient and, most recently, enhanced transformer ratios. Yet, the associated detrimental transverse wakefields have not been examined in as many details due to the limited diagnostics available. In this paper, we introduce a beam-based single-shot transverse-wakefield measurement technique. The approach employs a witness ''hollow" electron beam to probe the wakefields generated by a drive bunch. We show how the transverse distortions of the hollow probe provide a direct measurement of the wakefield distribution within the area circumscribed by the probe. The ability to directly measure a full structure of the transverse wakefield could help to develop mitigation schemes and ultimately suppress the adverse beam-break-up instabilities. We discuss a practical implementation of the method and demonstrate its performance with the help of start-to-end simulations.
△ Less
Submitted 6 July, 2023;
originally announced July 2023.
-
Numerical Modeling of a Proof-of-Principle Experiment on Optical Stochastic Cooling at the IOTA Electron Storage Ring
Authors:
Austin Dick,
Michael Borland,
Jonathan Jarvis,
Valeri Lebedev,
Philippe Piot,
Aleksandr Romanov,
Michael Wallbank
Abstract:
Cooling of beams circulating in storage rings is critical for many applications including particle colliders and synchrotron light sources. A method enabling unprecedented beam-cooling rates, optical stochastic cooling (OSC), was recently demonstrated in the IOTA electron storage ring at Fermilab. This paper describes the numerical implementation of the OSC process in the particle-tracking program…
▽ More
Cooling of beams circulating in storage rings is critical for many applications including particle colliders and synchrotron light sources. A method enabling unprecedented beam-cooling rates, optical stochastic cooling (OSC), was recently demonstrated in the IOTA electron storage ring at Fermilab. This paper describes the numerical implementation of the OSC process in the particle-tracking program ELEGANT and discusses the validation of the developed model with available experimental data. The model is also employed to highlight some features associated with different modes of operation of OSC. The developed simulation tool should be valuable in guiding future configurations of optical stochastic cooling and, more broadly, modeling self-field-based beam manipulations.
△ Less
Submitted 15 June, 2023; v1 submitted 13 June, 2023;
originally announced June 2023.
-
Single-shot, transverse self-wakefield reconstruction from screen images
Authors:
N. Majernik,
W. Lynn,
G. Andonian,
T. Xu,
P. Piot,
J. B. Rosenzweig
Abstract:
A single-shot method to reconstruct the transverse self-wakefields acting on a beam, based only on screen images, is introduced. By employing numerical optimization with certain approximations, a relatively high-dimensional parameter space is efficiently explored to determine the multipole components of the transverse-wakefield topology up to desired order. The reconstruction technique complements…
▽ More
A single-shot method to reconstruct the transverse self-wakefields acting on a beam, based only on screen images, is introduced. By employing numerical optimization with certain approximations, a relatively high-dimensional parameter space is efficiently explored to determine the multipole components of the transverse-wakefield topology up to desired order. The reconstruction technique complements simulations, which are able to directly describe the wakefield composition based on experimental conditions. The technique is applied to representative simulation results as a benchmark, and also to experimental data on wakefield observations driven in dielectric-lined structures.
△ Less
Submitted 15 June, 2023; v1 submitted 8 June, 2023;
originally announced June 2023.
-
Beam shaping using an ultra-high vacuum multileaf collimator and emittance exchange beamline
Authors:
N. Majernik,
G. Andonian,
W. Lynn,
S. Kim,
C. Lorch,
R. Roussel,
S. Doran,
E. Wisniewski,
C. Whiteford,
P. Piot,
J. Power,
J. B. Rosenzweig
Abstract:
We report the development of a multileaf collimator (MLC) for charged particle beams, based on independently actuated tungsten strips which can selectively scatter unwanted particles. The MLC is used in conjunction with an emittance exchange beamline to rapidly generate highly variable longitudinal bunch profiles. The developed MLC consists of 40 independent leaves that are 2 mm wide and can move…
▽ More
We report the development of a multileaf collimator (MLC) for charged particle beams, based on independently actuated tungsten strips which can selectively scatter unwanted particles. The MLC is used in conjunction with an emittance exchange beamline to rapidly generate highly variable longitudinal bunch profiles. The developed MLC consists of 40 independent leaves that are 2 mm wide and can move up to 10 mm, and operates in an ultra high vacuum environment, enabled by novel features such as magnetically coupled actuation. An experiment at the Argonne Wakefield Accelerator, which previously used inflexible, laser-cut masks for beam shaping before an emittance exchange beamline, was conducted to test functionality. The experiment demonstrated myriad transverse mask silhouettes, as measured on a scintillator downstream of the MLC and the corresponding longitudinal profiles after emittance exchange, as measured using a transverse deflecting cavity. Rapidly changing between mask shapes enables expeditious execution of various experiments without the downtime associated with traditional methods. The many degrees of freedom of the MLC can enable optimization of experimental figures of merit using feed-forward control and advanced machine learning methods.
△ Less
Submitted 5 October, 2022;
originally announced October 2022.
-
Electron Sources for Accelerators
Authors:
Daniele Filippetto,
Joe Grames,
Carlos Hernandez-Garcia,
Siddharth Karkare,
Philippe Piot,
John Power,
Yine Sun,
Erdong Wang
Abstract:
Electron sources are essential to an array of electron accelerator supporting research in high-energy physics and beyond. This report summarizes the "Snowmass 2021 Electron Source Workshop" which reviewed the current state-of-the art research and identified some possible research directions.
Electron sources are essential to an array of electron accelerator supporting research in high-energy physics and beyond. This report summarizes the "Snowmass 2021 Electron Source Workshop" which reviewed the current state-of-the art research and identified some possible research directions.
△ Less
Submitted 18 July, 2022;
originally announced July 2022.
-
Proposal for a Damping-Ring-Free Electron Injector for Future Linear Colliders
Authors:
Tianzhe Xu,
Masao Kuriki,
Philippe Piot,
John Power
Abstract:
The current designs of future electron-positron linear colliders incorporate large and complex damping rings to produce asymmetric beams for beamstrahlung suppression. Here we present the design of an electron injector capable of delivering flat electron beams with phase-space partition comparable to the electron-beam parameters produced downstream of the damping ring in the proposed international…
▽ More
The current designs of future electron-positron linear colliders incorporate large and complex damping rings to produce asymmetric beams for beamstrahlung suppression. Here we present the design of an electron injector capable of delivering flat electron beams with phase-space partition comparable to the electron-beam parameters produced downstream of the damping ring in the proposed international linear collider (ILC) design. Our design does not employ a damping ring but is instead based on cross-plane phase-space-manipulation techniques. The performance of the proposed configuration, its sensitivity to jitter along with its impact on spin-polarization is investigated. The proposed paradigm could be adapted to other linear collider concepts under consideration and offers a path toward significant cost and complexity reduction.
△ Less
Submitted 7 May, 2022;
originally announced May 2022.
-
Experimental demonstration of OSC at IOTA: IOTA Run #3 Report
Authors:
J. Jarvis,
V. Lebedev,
A. Romanov,
D. Broemmelsiek,
K. Carlson,
S. Chattopadhyay,
A. Dick,
D. Edstrom,
I. Lobach,
S. Nagaitsev,
H. Piekarz,
P. Piot,
J. Ruan,
J. Santucci,
G. Stancari,
A. Valishev
Abstract:
Optical Stochastic Cooling (OSC) is an optical-bandwidth extension of Stochastic Cooling that could advance the state-of-the-art cooling rate in beam cooling by three to four orders of magnitude [1-3]. The concept of OSC was first suggested in the early 1990s by Zolotorev, Zholents and Mikhailichenko, and replaced the microwave hardware of SC with optical analogs, such as wigglers and optical ampl…
▽ More
Optical Stochastic Cooling (OSC) is an optical-bandwidth extension of Stochastic Cooling that could advance the state-of-the-art cooling rate in beam cooling by three to four orders of magnitude [1-3]. The concept of OSC was first suggested in the early 1990s by Zolotorev, Zholents and Mikhailichenko, and replaced the microwave hardware of SC with optical analogs, such as wigglers and optical amplifiers. A number of variations on the original OSC concept have been proposed, and while a variety of proof-of-principle demonstrations and operational uses have been considered, the concept was not experimentally demonstrated up to now [4-9]. An OSC R&D program has been underway at IOTA for the past several years [4]. Run #3 of the IOTA ring, which began in Nov. 2020 and concluded in Aug. 2021, was focused on the worlds first experimental demonstration of OSC. The experimental program was successful in demonstrating and characterizing the OSC physics with the major outcomes including strong cooling in one, two and three dimensions, validation of the theoretical models of OSC and the demonstration of OSC with a single electron. This report briefly describes the activities and major milestones of the OSC program during Run #3. Detailed descriptions of the OSC theory, conceptual design and hardware elements can be found in reference [4].
△ Less
Submitted 11 April, 2022;
originally announced April 2022.
-
Demonstration of sub-GV/m Accelerating Field in a Photoemission Electron Gun Powered by Nanosecond $X$-Band Radiofrequency Pulses
Authors:
W. H. Tan,
S. Antipov,
D. S. Doran,
G. Ha,
C. Jing,
E. Knight,
S. Kuzikov,
W. Liu,
X. Lu,
P. Piot,
J. G. Power,
J. Shao,
C. Whiteford,
E. E. Wisniewski
Abstract:
Radiofrequency (RF) electron guns operating at high accelerating gradients offer a pathway to producing bright electron bunches. Such beams are expected to revolutionize many areas of science: they could form the backbone of next-generation compact x-ray free-electron lasers or provide coherent ultrafast quantum electron probes. We report on the experimental demonstration of an RF photoemission el…
▽ More
Radiofrequency (RF) electron guns operating at high accelerating gradients offer a pathway to producing bright electron bunches. Such beams are expected to revolutionize many areas of science: they could form the backbone of next-generation compact x-ray free-electron lasers or provide coherent ultrafast quantum electron probes. We report on the experimental demonstration of an RF photoemission electron source supporting an accelerating field close to 400~MV/m at the photocathode surface. The gun was operated in an RF transient mode driven by short $\sim 9$~ns X-band (\SI{11.7}{\giga\hertz}) RF pulses. We did not observe any major RF breakdown or significant dark current over a three-week experimental run at high accelerating fields. The demonstrated paradigm provides a viable path to forming relativistic electron beams with unprecedented brightness.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Beam Test Facilities for R&D in Accelerator Science and Technologies
Authors:
John Power,
Christine Clarke,
Michael Downer,
Eric Esarey,
Cameron Geddes,
Mark J. Hogan,
Georg Heinz Hoffstaetter,
Chunguang Jing,
Sergei Nagaitsev,
Mark Palmer,
Philippe Piot,
Carl Schroeder,
Donald Umstadter,
Navid Vafaei-Najafabadi,
Alexander Valishev,
Louise Willingale,
Vitaly Yakimenko
Abstract:
This is the Snowmass Whitepaper on Beam Test Facilities for R&D in Accelerator Science and Technologies and it is submitted to two topical groups in the Accelerator Frontier: AF1 and AF6.
This is the Snowmass Whitepaper on Beam Test Facilities for R&D in Accelerator Science and Technologies and it is submitted to two topical groups in the Accelerator Frontier: AF1 and AF6.
△ Less
Submitted 21 March, 2022;
originally announced March 2022.
-
Strategies in Education, Outreach, and Inclusion to Enhance the US Workforce in Accelerator Science and Engineering
Authors:
M. Bai,
W. A. Barletta,
D. L. Bruhwiler,
S. Chattopadhyay,
Y. Hao,
S. Holder,
J. Holzbauer,
Z. Huang,
K. Harkay,
Y. -K. Kim,
X. Lu,
S. M. Lund,
N. Neveu,
P. Ostroumov,
J. R. Patterson,
P. Piot,
T. Satogata,
A. Seryi,
A. K. Soha,
S. Winchester
Abstract:
We summarize the community-based consensus for improvements concerning education, public outreach, and inclusion in Accelerator Science and Engineering that will enhance the workforce in the USA. The improvements identified reflect the product of discussions held within the 2021-2022 Snowmass community planning process by topical group AF1: Beam Physics and Accelerator Education within the Acceler…
▽ More
We summarize the community-based consensus for improvements concerning education, public outreach, and inclusion in Accelerator Science and Engineering that will enhance the workforce in the USA. The improvements identified reflect the product of discussions held within the 2021-2022 Snowmass community planning process by topical group AF1: Beam Physics and Accelerator Education within the Accelerator Frontier. Although the Snowmass process centers on high-energy physics, this document outlines required improvements for the entire U.S. accelerator science and engineering enterprise because education of those entering and in the field, outreach to the public, and inclusion are inextricably linked.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
First Experimental Demonstration of Optical Stochastic Cooling
Authors:
J. Jarvis,
V. Lebedev,
A. Romanov,
D. Broemmelsiek,
K. Carlson,
S. Chattopadhyay,
A. Dick,
D. Edstrom,
I. Lobach,
S. Nagaitsev,
H. Piekarz,
P. Piot,
J. Ruan,
J. Santucci,
G. Stancari,
A. Valishev
Abstract:
Particle accelerators and storage rings have been transformative instruments of discovery, and, for many applications, innovations in particle-beam cooling have been a principal driver of that success1. Beam cooling reduces the spread in particle positions and momenta, while keeping the number of particles constant, and combats diffusive effects, thereby enabling particle accumulation and the prod…
▽ More
Particle accelerators and storage rings have been transformative instruments of discovery, and, for many applications, innovations in particle-beam cooling have been a principal driver of that success1. Beam cooling reduces the spread in particle positions and momenta, while keeping the number of particles constant, and combats diffusive effects, thereby enabling particle accumulation and the production and preservation of intense beams. In the case of particle colliders, cooling increases the likelihood of observing rare physics events. One of the most important conceptual and technological advances in this area was stochastic cooling (SC), which was instrumental in the discovery of the W and Z bosons at CERN and the top quark at Fermilab2-6. SC reduces the random motion of the beam particles through granular sampling and correction of the beams phase-space structure, thus bearing resemblance to a Maxwells demon. The extension of SC from the microwave regime up to optical frequencies and bandwidths has long been pursued as it could increase the achievable cooling rates by three to four orders of magnitude and provide a powerful new tool for future accelerators. First proposed nearly thirty years ago, Optical Stochastic Cooling (OSC) replaces the conventional microwave elements of SC with optical-frequency analogs and is, in principle, compatible with any species of charged-particle beam7,8. Here we describe the first experimental demonstration of OSC in a proof-of-principle experiment9 at the Fermi National Accelerator Laboratorys Integrable Optics Test Accelerator10.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Advanced RF Structures for Wakefield Acceleration and High-Gradient Research
Authors:
Xueying Lu,
Jiahang Shao,
John Power,
Chunguang Jing,
Gwanghui Ha,
Philippe Piot,
Alexander Zholents,
Richard Temkin,
Michael Shapiro,
Julian Picard,
Bagrat Grigoryan,
Chuanxiang Tang,
Yingchao Du,
Jiaru Shi,
Hao Zha,
Dao Xiang,
Emilio Nanni,
Brendan O'Shea,
Yuri Saveliev,
Thomas Pacey,
James Rosenzweig,
Gerard Andonian,
Evgenya Simakov,
Francois Lemery,
Alex Murokh
, et al. (6 additional authors not shown)
Abstract:
Structure wakefield acceleration (SWFA) is one of the most promising AAC schemes in several recent strategic reports, including DOE's 2016 AAC Roadmap, report on the Advanced and Novel Accelerators for High Energy Physics Roadmap (ANAR), and report on Accelerator and Beam Physics Research Goals and Opportunities. SWFA aims to raise the gradient beyond the limits of conventional radiofrequency (RF)…
▽ More
Structure wakefield acceleration (SWFA) is one of the most promising AAC schemes in several recent strategic reports, including DOE's 2016 AAC Roadmap, report on the Advanced and Novel Accelerators for High Energy Physics Roadmap (ANAR), and report on Accelerator and Beam Physics Research Goals and Opportunities. SWFA aims to raise the gradient beyond the limits of conventional radiofrequency (RF) accelerator technology, and thus the RF to beam energy efficiency, by reducing RF breakdowns from confining the microwave energy in a short (on the order of about 10 ns) and intense pulse excited by a drive beam. We envision that the following research topics, within the scope of AF7, are of great interest in the next decade: advanced wakefield structures, terahertz and sub-terahertz (THz) structures, and RF breakdown physics. Research on SWFA in the above directions would directly contribute to long-term large-scale applications, including AAC-based linear colliders and compact light sources. There is also potentially a strong synergy between SWFA and other AAC concepts, when structures are combined with plasmas into hybrid AAC schemes. Research on novel structures is at the core of advancing SWFA, and is critical to future AAC-based linear colliders; at the same, it has a strong synergy with other directions, such as cavity designs, high-power microwave systems and sources, and compact light sources.
△ Less
Submitted 23 March, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
Snowmass21 Accelerator Modeling Community White Paper
Authors:
S. Biedron,
L. Brouwer,
D. L. Bruhwiler,
N. M. Cook,
A. L. Edelen,
D. Filippetto,
C. -K. Huang,
A. Huebl,
T. Katsouleas,
N. Kuklev,
R. Lehe,
S. Lund,
C. Messe,
W. Mori,
C. -K. Ng,
D. Perez,
P. Piot,
J. Qiang,
R. Roussel,
D. Sagan,
A. Sahai,
A. Scheinker,
M. Thévenet,
F. Tsung,
J. -L. Vay
, et al. (2 additional authors not shown)
Abstract:
After a summary of relevant comments and recommendations from various reports over the last ten years, this paper examines the modeling needs in accelerator physics, from the modeling of single beams and individual accelerator elements, to the realization of virtual twins that replicate all the complexity to model a particle accelerator complex as accurately as possible. We then discuss cutting-ed…
▽ More
After a summary of relevant comments and recommendations from various reports over the last ten years, this paper examines the modeling needs in accelerator physics, from the modeling of single beams and individual accelerator elements, to the realization of virtual twins that replicate all the complexity to model a particle accelerator complex as accurately as possible. We then discuss cutting-edge and emerging computing opportunities, such as advanced algorithms, AI/ML and quantum computing, computational needs in hardware, software performance, portability and scalability, and needs for scalable I/O and in-situ analysis. Considerations of reliability, long-term sustainability, user support and training are considered next, before discussing the benefits of ecosystems with integrated workflows based on standardized input and output, and with integrated frameworks and data repositories developed as a community. Last, we highlight how the community can work more collaboratively and efficiently through the development of consortia and centers, and via collaboration with industry.
△ Less
Submitted 22 September, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
Continuous and Coordinated Efforts of Structure Wakefield Acceleration (SWFA) Development for an Energy Frontier Machine
Authors:
Chunguang Jing,
John Power,
Jiahang Shao,
Gwanghui Ha,
Philippe Piot,
Xueying Lu,
Alexander Zholents,
Alexei Kanareykin,
Sergey Kuzikov,
James B. Rosenzweig,
Gerard Andonian,
Evgenya Ivanovna Simakov,
Janardan Upadhyay,
Chuanxiang Tang,
Richard J Temkin,
Emilio Alessandro Nanni,
John Lewellen
Abstract:
Structure wakefield acceleration (SWFA) is well suited for the linear collider (LC) application due to its natural ability to accelerate positrons and preserve emittance. Under the SWFA roadmap, which was developed in response to Snowmass 2013 recommendations, four principal technologies: drive beam, main beam, wakefield structure, and LC facility design, have been investigated. The two SWFA schem…
▽ More
Structure wakefield acceleration (SWFA) is well suited for the linear collider (LC) application due to its natural ability to accelerate positrons and preserve emittance. Under the SWFA roadmap, which was developed in response to Snowmass 2013 recommendations, four principal technologies: drive beam, main beam, wakefield structure, and LC facility design, have been investigated. The two SWFA schemes under development are the collinear wakefield accelerator (CWA), in which the drive and main beam follow the same path through a structure, and the two-beam accelerator (TBA), where the drive and main beam pass through different structures. To further advance the SWFA technology in the next decade, continuous and coordinated efforts must be carried out in a more synchronized way. This whitepaper is written to address the research needs in SWFA for preparation of Snowmass 2022.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Accelerator and Beam Physics: Grand Challenges and Research Opportunities
Authors:
S. Nagaitsev,
V. Shiltsev,
A. Valishev,
T. Zolkin,
J. -L. Vay,
M. Bai,
Y. Cai,
M. J. Hogan,
Z. Huang,
J. Seeman,
B. Dunham,
X. Huang,
T. Roser,
M. Minty,
J. Rosenzweig,
P. Piot,
J. Power,
J. M. Byrd,
A. Seryi,
S. Lund,
J. R. Patterson
Abstract:
Accelerator and beam physics (ABP) is the science of the motion, generation, acceleration, manipulation, prediction, observation and use of charged particle beams. It focuses on fundamental long-term accelerator and beam physics research and development. Accelerator and beam physics research has resulted in important advances in accelerator science, yet support for this research is declining. NSF…
▽ More
Accelerator and beam physics (ABP) is the science of the motion, generation, acceleration, manipulation, prediction, observation and use of charged particle beams. It focuses on fundamental long-term accelerator and beam physics research and development. Accelerator and beam physics research has resulted in important advances in accelerator science, yet support for this research is declining. NSF has terminated its program in accelerator Science and funding by DOE through GARD and Accelerator Stewardship has been steady or declining. The declining support for accelerator research will slow advances and threaten student training and work-force development in accelerator science. We propose a robust and scientifically challenging program in accelerator and beam physics, which will position the field of US High Energy Physics to be productive and competitive for decades to come.
△ Less
Submitted 13 March, 2022;
originally announced March 2022.
-
Direct Measurement of Eigenemittances Transfer to Projected Emittances via Phase-Space Decoupling for an Electron Beam
Authors:
Tianzhe Xu,
Scott Doran,
Wanming Liu,
Philippe Piot,
John Power,
Charles Whiteford,
Eric Wisniewski
Abstract:
Phase-space partitioning offers an attractive path for the precise tailoring of complex dynamical systems. In Beam Physics, the proposed approach involves (i) producing beams with cross-plane correlations to control kinematical invariants known as eigenemittances and (ii) mapping them to invariants of motion associated with given degrees of freedom via a decoupling transformation. Here we report o…
▽ More
Phase-space partitioning offers an attractive path for the precise tailoring of complex dynamical systems. In Beam Physics, the proposed approach involves (i) producing beams with cross-plane correlations to control kinematical invariants known as eigenemittances and (ii) mapping them to invariants of motion associated with given degrees of freedom via a decoupling transformation. Here we report on the direct experimental demonstration of the mapping of eigenemittances to transverse emittances for an electron beam. Measured phase space density confirms the generation of beams with asymmetric transverse emittance ratio> 200 consistent with the initiated eigenemittance values. The results could have broad applications to other fields where invariants are sometimes used to describe coupled classical system quantum systems with mixed states.
△ Less
Submitted 30 November, 2021;
originally announced November 2021.
-
Bunch Shaping in Electron Linear Accelerators
Authors:
G. Ha,
K. -J. Kim,
P. Piot,
J. G. Power,
Y. Sun
Abstract:
Modern electron linear accelerators are often designed to produce smooth bunch distributions characterized by their macroscopic ensemble-average moments. However, an increasing number of accelerator applications call for finer control over the beam distribution, e.g., by requiring specific shapes for its projection along one coordinate. Ultimately, the control of the beam distribution at the singl…
▽ More
Modern electron linear accelerators are often designed to produce smooth bunch distributions characterized by their macroscopic ensemble-average moments. However, an increasing number of accelerator applications call for finer control over the beam distribution, e.g., by requiring specific shapes for its projection along one coordinate. Ultimately, the control of the beam distribution at the single-particle level could enable new opportunities in accelerator science. This review discusses the recent progress toward controlling electron beam distributions on the "mesoscopic" scale with an emphasis on shaping the beam or introducing complex correlations required for some applications. This review emphasizes experimental and theoretical developments of electron-bunch shaping methods based on bounded external electromagnetic fields or via interactions with the self-generated velocity and radiation fields.
△ Less
Submitted 31 October, 2021;
originally announced November 2021.
-
Photoinjector Generation of High-Charge Magnetized Beams for Electron-Cooling Applications
Authors:
A. Fetterman,
D. Mihalcea,
S. Benson,
D. Crawford,
D. Edstrom,
F. Hannon,
P. Piot,
J. Ruan,
S. Wang
Abstract:
Electron-cooling offers a relatively simple scheme to enable high-luminosity collisions in future electron-ion and hadron colliders. Contemplated TeV-energy hadron colliders require relativistic (sub 100 MeV) high-charge [${\cal O}(\mbox{nC})$] electron beams with a specific transverse eigenemittance partition. This paper discusses the generation of high-charge ($Q\le 3.2$~nC) 40 MeV electron bunc…
▽ More
Electron-cooling offers a relatively simple scheme to enable high-luminosity collisions in future electron-ion and hadron colliders. Contemplated TeV-energy hadron colliders require relativistic (sub 100 MeV) high-charge [${\cal O}(\mbox{nC})$] electron beams with a specific transverse eigenemittance partition. This paper discusses the generation of high-charge ($Q\le 3.2$~nC) 40 MeV electron bunches with eigenemittance partition consistent with requirements associated with electron-cooling option for future electron-ion colliders. The supporting experiment was performed at the FAST facility at FermiLab. The data are compared with numerical simulations and the results discussed in the context of beam requirement for future electron-ion colliders.
△ Less
Submitted 20 September, 2021;
originally announced September 2021.
-
Modeling of Advanced Accelerator Concepts
Authors:
J. -L. Vay,
A. Huebl,
R. Lehe,
N. M. Cook,
R. J. England,
U. Niedermayer,
P. Piot,
F. Tsung,
D. Winklehner
Abstract:
Computer modeling is essential to research on Advanced Accelerator Concepts (AAC), as well as to their design and operation. This paper summarizes the current status and future needs of AAC systems and reports on several key aspects of (i) high-performance computing (including performance, portability, scalability, advanced algorithms, scalable I/Os and In-Situ analysis), (ii) the benefits of ecos…
▽ More
Computer modeling is essential to research on Advanced Accelerator Concepts (AAC), as well as to their design and operation. This paper summarizes the current status and future needs of AAC systems and reports on several key aspects of (i) high-performance computing (including performance, portability, scalability, advanced algorithms, scalable I/Os and In-Situ analysis), (ii) the benefits of ecosystems with integrated workflows based on standardized input and output and with integrated frameworks developed as a community, and (iii) sustainability and reliability (including code robustness and usability).
△ Less
Submitted 14 September, 2021; v1 submitted 10 September, 2021;
originally announced September 2021.
-
Turn-Key Constrained Parameter Space Exploration for Particle Accelerators Using Bayesian Active Learning
Authors:
Ryan Roussel,
Juan Pablo Gonzalez-Aguilera,
Young-Kee Kim,
Eric Wisniewski,
Wanming Liu,
Philippe Piot,
John Power,
Adi Hanuka,
Auralee Edelen
Abstract:
Particle accelerators are invaluable discovery engines in the chemical, biological and physical sciences. Characterization of the accelerated beam response to accelerator input parameters is of-ten the first step when conducting accelerator-based experiments. Currently used techniques for characterization, such as grid-like parameter sampling scans, become impractical when extended to higher dimen…
▽ More
Particle accelerators are invaluable discovery engines in the chemical, biological and physical sciences. Characterization of the accelerated beam response to accelerator input parameters is of-ten the first step when conducting accelerator-based experiments. Currently used techniques for characterization, such as grid-like parameter sampling scans, become impractical when extended to higher dimensional input spaces, when complicated measurement constraints are present, or prior information is known about the beam response is scarce. In this work, we describe an adaptation of the popular Bayesian optimization algorithm, which enables a turn-key exploration algorithm that replaces parameter scans and minimizes prior information needed about the measurements' behavior and associated measurement constraints. We experimentally demonstrate that our algorithm autonomously conducts an adaptive, multi-parameter exploration of input parameter space,while navigating a highly constrained, single-shot beam phase-space measurement. In addition to applications in accelerator-based scientific experiments, this algorithm addresses challenges shared by many scientific disciplines and is thus applicable to autonomously conducting experiments over a broad range of research topics.
△ Less
Submitted 16 June, 2021;
originally announced June 2021.
-
Formation of Temporally Shaped Electron Bunches for Beam-Driven Collinear Wakefield Accelerators
Authors:
Wei-Hou Tan,
Philippe Piot,
Alexander Zholents
Abstract:
Beam-driven collinear wakefield accelerators (CWAs) that operate by using slow-wave structures or plasmas hold great promise toward reducing the size of contemporary accelerators. Sustainable acceleration of charged particles to high energies in the CWA relies on using field-generating relativistic electron bunches with a highly asymmetric peak current profile and a large energy chirp. A new appro…
▽ More
Beam-driven collinear wakefield accelerators (CWAs) that operate by using slow-wave structures or plasmas hold great promise toward reducing the size of contemporary accelerators. Sustainable acceleration of charged particles to high energies in the CWA relies on using field-generating relativistic electron bunches with a highly asymmetric peak current profile and a large energy chirp. A new approach to obtaining such bunches has been proposed and illustrated with the accelerator design supported by particle tracking simulations. It has been shown that the required particle distribution in the longitudinal phase space can be obtained without collimators, giving CWAs an opportunity for employment in applications requiring a high repetition rate of operation.
△ Less
Submitted 18 January, 2021;
originally announced January 2021.
-
Accelerator and Beam Physics Research Goals and Opportunities
Authors:
S. Nagaitsev,
Z. Huang,
J. Power,
J. -L. Vay,
P. Piot,
L. Spentzouris,
J. Rosenzweig,
Y. Cai,
S. Cousineau,
M. Conde,
M. Hogan,
A. Valishev,
M. Minty,
T. Zolkin,
X. Huang,
V. Shiltsev,
J. Seeman,
J. Byrd,
Y. Hao,
B. Dunham,
B. Carlsten,
A. Seryi,
R. Patterson
Abstract:
This report is a summary of two preparatory workshops, documenting the community vision for the national accelerator and beam physics research program. It identifies the Grand Challenges of accelerator and beam physics (ABP) field and documents research opportunities to address these Grand Challenges. This report will be used to develop a strategic research roadmap for the field of accelerator sci…
▽ More
This report is a summary of two preparatory workshops, documenting the community vision for the national accelerator and beam physics research program. It identifies the Grand Challenges of accelerator and beam physics (ABP) field and documents research opportunities to address these Grand Challenges. This report will be used to develop a strategic research roadmap for the field of accelerator science.
△ Less
Submitted 25 January, 2021; v1 submitted 11 January, 2021;
originally announced January 2021.
-
A Field-Enhanced Conduction-Cooled Superconducting Cavity for High-Repetition-Rate Ultrafast Electron Bunch Generation
Authors:
Osama Mohsen,
Daniel Mihalcea,
Nathan Tom,
Noah Adams,
Ram Dhuley,
Michael I Geelhoed,
Aaron McKeown,
Venumadhav Korampally,
Philippe Piot,
Iman Salehinia,
Jayakar C. Thangaraj,
Tianzhe Xu
Abstract:
High-repetition-rate sources of bright electron bunches have a wide range of applications. They can directly be employed as probes in electron-scattering setups, or serve as a backbone for the generation of radiation over a broad range of the electromagnetic spectrum. This paper describes the development of a compact sub-Mega-electronvolt (sub-MeV) electron-source setup capable of operating at MHz…
▽ More
High-repetition-rate sources of bright electron bunches have a wide range of applications. They can directly be employed as probes in electron-scattering setups, or serve as a backbone for the generation of radiation over a broad range of the electromagnetic spectrum. This paper describes the development of a compact sub-Mega-electronvolt (sub-MeV) electron-source setup capable of operating at MHz repetition rates and forming sub-picosecond electron bunches with transverse emittance below 20~nm. The setup relies on a conduction-cooled superconducting single-cell resonator with its geometry altered to enhance the field at the surface of the emitter. The system is designed to accommodate cooling using a model a $2$~W at 4.2 K pulse tube cryogen-free cryocooler. Although we focus on the case of a photoemitted electron bunch, the scheme could be adapted to other emission mechanisms.
△ Less
Submitted 24 December, 2020;
originally announced December 2020.
-
A Single-pass Cr:ZnSe Amplifier for Broadband Infared Undulator Radiation
Authors:
M. B. Andorf,
V. A. Lebedev,
P. Piot
Abstract:
An amplifier based on a highly-doped Chromium Zinc-Selenide (Cr:ZnSe) crystal is proposed to increase the pulse energy emitted by an electron bunch after it passes through an undulator magnet. The primary motivation is a possible use of the amplified undulator radiation emitted by a beam circulating in a particle accelerator storage ring to increase the particle beam's phase-space density---a tech…
▽ More
An amplifier based on a highly-doped Chromium Zinc-Selenide (Cr:ZnSe) crystal is proposed to increase the pulse energy emitted by an electron bunch after it passes through an undulator magnet. The primary motivation is a possible use of the amplified undulator radiation emitted by a beam circulating in a particle accelerator storage ring to increase the particle beam's phase-space density---a technique dubbed Optical Stochastic Cooling (OSC). This paper uses a simple four energy level model to estimate the single-pass gain of Cr:ZnSe and presents numerical calculations combined with wave-optics simulations of undulator radiation to estimate the expected properties of the amplified undulator wave-packet.
△ Less
Submitted 12 July, 2020; v1 submitted 27 April, 2020;
originally announced April 2020.
-
Tailoring of an Electron-Bunch Current Distribution via Space-to-Time Mapping of a Transversely-Shaped Photoemission-Laser Pulse
Authors:
A. Halavanau,
Q. Gao,
M. Conde,
G. Ha,
P. Piot,
J. G. Power,
E. Wisniewski
Abstract:
Temporally-shaped electron bunches at ultrafast time scales are foreseen to support an array of applications including the development of small-footprint accelerator-based coherent light sources or as probes for, e.g., ultrafast electron-diffraction. We demonstrate a method where a transversely-segmented electron bunch produced via photoemission from a transversely-patterned laser distribution is…
▽ More
Temporally-shaped electron bunches at ultrafast time scales are foreseen to support an array of applications including the development of small-footprint accelerator-based coherent light sources or as probes for, e.g., ultrafast electron-diffraction. We demonstrate a method where a transversely-segmented electron bunch produced via photoemission from a transversely-patterned laser distribution is transformed into an electron bunch with modulated temporal distribution. In essence, the presented transformation enables the mapping of the transverse laser distribution on a photocathode surface to the temporal coordinate and provides a proof-of-principle experiment of the method proposed in W. S. Graves, et al. as a path toward the realization of compact coherent X-ray sources, albeit at a larger timescale. The presented experiment is validated against numerical simulations and the versatility of the concept, e.g. to tune the current-distribution parameters, is showcased. Although our work focuses on the generation of electron bunches arranged as a temporal comb it is applicable to other temporal shapes.
△ Less
Submitted 26 September, 2019; v1 submitted 3 July, 2019;
originally announced July 2019.
-
Optical Stochastic Cooling Experiment At The Fermilab IOTA Ring
Authors:
J. D. Jarvis,
V. Lebedev,
H. Piekarz,
A. L. Romanov,
J. Ruan,
M. B. Andorf,
P. Piot
Abstract:
Beam cooling enables an increase of peak and average luminosities and significantly expands the discovery potential of colliders; therefore, it is an indispensable component of any modern design. Optical Stochastic Cooling (OSC) is a high-bandwidth, beam-cooling technique that will advance the present state-of-the-art, stochastic cooling rate by more than three orders of magnitude. It is an enabli…
▽ More
Beam cooling enables an increase of peak and average luminosities and significantly expands the discovery potential of colliders; therefore, it is an indispensable component of any modern design. Optical Stochastic Cooling (OSC) is a high-bandwidth, beam-cooling technique that will advance the present state-of-the-art, stochastic cooling rate by more than three orders of magnitude. It is an enabling technology for next-generation, discovery-science machines at the energy and intensity frontiers including hadron and electron-ion colliders. This paper presents the status of our experimental effort to demonstrate OSC at the Integrable Optics Test Accelerator (IOTA) ring, a testbed for advanced beam-physics concepts and technologies that is currently being commissioned at Fermilab. Our recent efforts are centered on the development of an integrated design that is prepared for final engineering and fabrication. The paper also presents a comparison of theoretical calculations and numerical simulations of the pickup-undulator radiation and its interaction with electrons in the kicker-undulator.
△ Less
Submitted 23 August, 2018;
originally announced August 2018.
-
Micro-bunching for generating tunable narrow-band THz radiation at the FAST photoinjector
Authors:
J. Hyun,
P. Piot,
T. Sen,
J. C. Thangaraj
Abstract:
This paper presents expected THz radiation spectra emitted by micro-bunched electron beams produced using a slit-mask placed within a magnetic chicane in the FAST (Fermilab Accelerator Science and Technology) electron injector at Fermilab. Our purpose is to generate tunable narrow-band THz radiation with a simple scheme in a conventional photo-injector. Using the slit-mask in the chicane, we creat…
▽ More
This paper presents expected THz radiation spectra emitted by micro-bunched electron beams produced using a slit-mask placed within a magnetic chicane in the FAST (Fermilab Accelerator Science and Technology) electron injector at Fermilab. Our purpose is to generate tunable narrow-band THz radiation with a simple scheme in a conventional photo-injector. Using the slit-mask in the chicane, we create a longitudinally micro-bunched beam after the chicane by transversely slicing an energy chirped electron bunch at a location with horizontal dispersion. In this paper, we discuss the theory related to the micro-bunched beam structure, the beam optics, the simulation results of the micro-bunched beam and the bunching factors. Energy radiated at THz frequencies from two sources: coherent transition radiation and from a wiggler is calculated and compared. We also discuss the results of a simple method to observe the micro-bunching on a transverse screen monitor using a skew quadrupole placed in the chicane.
△ Less
Submitted 12 November, 2018; v1 submitted 23 August, 2018;
originally announced August 2018.
-
Passive Ballistic Microbunching of Non-Ultrarelativistic Electron Bunches using Electromagnetic Wakefields in Dielectric-Lined Waveguides
Authors:
Francois Lemery,
Philippe Piot,
Gayane Amatuni,
Prach Boonpornprasert,
Ye Lining Chen,
James David Good,
Bagrat Grigoryan,
Matthias Gross,
Mikhail Krasilnikov,
Osip Lishilin,
Gregor Loisch,
Anne Oppelt,
Sebastian Philipp,
Houjun Qian,
Yves Renier,
Frank Stephan,
Igor Zagorodnov
Abstract:
Temporally-modulated electron beams have a wide array of applications ranging from the generation of coherently-enhanced electromagnetic radiation to the resonant excitation of electromagnetic wakefields in advanced-accelerator concepts. Likewise producing low-energy ultrashort microbunches could be useful for ultra-fast electron diffraction and new accelerator-based light-source concepts. In this…
▽ More
Temporally-modulated electron beams have a wide array of applications ranging from the generation of coherently-enhanced electromagnetic radiation to the resonant excitation of electromagnetic wakefields in advanced-accelerator concepts. Likewise producing low-energy ultrashort microbunches could be useful for ultra-fast electron diffraction and new accelerator-based light-source concepts. In this Letter we propose and experimentally demonstrate a passive microbunching technique capable of forming a picosecond bunch train at $\sim 6$~MeV. The method relies on the excitation of electromagnetic wakefields as the beam propagates through a dielectric-lined waveguide. Owing to the non-ultrarelativistic nature of the beam, the induced energy modulation eventually converts into a density modulation as the beam travels in a following free-space drift. The modulated beam is further accelerated to $\sim20$~MeV while preserving the imparted density modulation.
△ Less
Submitted 25 June, 2018;
originally announced June 2018.
-
Computation and Numerical Simulation of Focused Undulator Radiation for Optical Stochastic Cooling
Authors:
Matthew Andorf,
Valeri Lebedev,
Jonathan Jarvis,
Philippe Piot
Abstract:
Optical stochastic cooling (OSC) is a promising technique for the cooling of dense particle beams. Its operation at optical frequencies enables obtaining a much larger bandwidth compared to the wellknown microwave-based stochastic cooling. In the OSC undulator radiation generated by a particle in an upstream \pickup" undulator is amplified and focused at the location of a downstream "kicker" undul…
▽ More
Optical stochastic cooling (OSC) is a promising technique for the cooling of dense particle beams. Its operation at optical frequencies enables obtaining a much larger bandwidth compared to the wellknown microwave-based stochastic cooling. In the OSC undulator radiation generated by a particle in an upstream \pickup" undulator is amplified and focused at the location of a downstream "kicker" undulator. Inside the kicker, a particle interacts with its own radiation field from the pickup. The resulting interaction produces a longitudinal kick with its value depending on the particles momentum which, when correctly phased, yields to longitudinal cooling. The horizontal cooling is achieved by introducing a coupling between longitudinal and horizontal degrees of freedom. Vertical cooling is achieved by coupling between horizontal and vertical motions in the ring. In this paper, we present formulae for computation of the corrective kick and validate them against numerical simulations performed using a wave-optics computer program.
△ Less
Submitted 13 June, 2018;
originally announced June 2018.
-
Optics and bremsstrahlung estimates for channeling radiation experiments at FAST
Authors:
J. Hyun,
P. Piot,
T. Sen
Abstract:
This paper presents X-ray spectra of channeling radiation (CR) expected at the FAST (Fermi Accelerator Science and Technology) facility in Fermilab. Our purpose is to produce high brightness quasi-monochromatic X-rays in an energy range from 40 keV to 110 keV. We will use a diamond crystal and low emittance electrons with an energy of around 43 MeV. The quality of emitted X-rays strongly depends o…
▽ More
This paper presents X-ray spectra of channeling radiation (CR) expected at the FAST (Fermi Accelerator Science and Technology) facility in Fermilab. Our purpose is to produce high brightness quasi-monochromatic X-rays in an energy range from 40 keV to 110 keV. We will use a diamond crystal and low emittance electrons with an energy of around 43 MeV. The quality of emitted X-rays strongly depends on parameters of the electron beam at the crystal. We present simulations of the beam optics for high brightness and high yield operations with bunch charges of 1 pC, 20 pC, and 200 pC. We estimate the X-ray spectra including bremsstrahlung background for a charge of 20 pC. The electron beam distributions with and without channeling in the diamond crystal are calculated. We discuss an X-ray detector system to avoid pile-up effect during high charge operations.
△ Less
Submitted 16 February, 2018;
originally announced February 2018.
-
Initial Beam Dynamics Simulations of a High-Average-Current Field-Emission Electron Source in a Superconducting RadioFrequency Gun
Authors:
O. Mohsen,
I. Gonin,
R. Kephart,
T. Khabiboulline,
P. Piot,
N. Solyak,
J. C. Thangaraj,
V. Yakovlev
Abstract:
High-power electron beams are sought-after tools in support to a wide array of societal applications. This paper investigates the production of high-power electron beams by combining a high-current field-emission electron source to a superconducting radio-frequency (SRF) cavity. We especially carry out beam-dynamics simulations that demonstrate the viability of the scheme to form $\sim$ 300 kW ave…
▽ More
High-power electron beams are sought-after tools in support to a wide array of societal applications. This paper investigates the production of high-power electron beams by combining a high-current field-emission electron source to a superconducting radio-frequency (SRF) cavity. We especially carry out beam-dynamics simulations that demonstrate the viability of the scheme to form $\sim$ 300 kW average-power electron beam using a 1+1/2-cell SRF gun.
△ Less
Submitted 5 January, 2018;
originally announced January 2018.
-
An Adiabatic Phase-Matching Accelerator
Authors:
Francois Lemery,
Klaus Floettmann,
Philippe Piot,
Franz X. Kaertner,
Ralph Assmann
Abstract:
We present a general concept to accelerate non-relativistic charged particles. Our concept employs an adiabatically-tapered dielectric-lined waveguide which supports accelerating phase velocities for synchronous acceleration. We propose an ansatz for the transient field equations, show it satisfies Maxwell's equations under an adiabatic approximation and find excellent agreement with a finite-diff…
▽ More
We present a general concept to accelerate non-relativistic charged particles. Our concept employs an adiabatically-tapered dielectric-lined waveguide which supports accelerating phase velocities for synchronous acceleration. We propose an ansatz for the transient field equations, show it satisfies Maxwell's equations under an adiabatic approximation and find excellent agreement with a finite-difference time-domain computer simulation. The fields were implemented into the particle-tracking program {\sc astra} and we present beam dynamics results for an accelerating field with a 1-mm-wavelength and peak electric field of 100~MV/m. The numerical simulations indicate that a $\sim 200$-keV electron beam can be accelerated to an energy of $\sim10$~MeV over $\sim 10$~cm. The novel scheme is also found to form electron beams with parameters of interest to a wide range of applications including, e.g., future advanced accelerators, and ultra-fast electron diffraction.
△ Less
Submitted 22 December, 2017;
originally announced December 2017.
-
Wave-Optics Modeling of the Optical-Transport Line for Passive Optical Stochastic Cooling
Authors:
M. B. Andorf,
V. A. Lebedev,
P. Piot,
J. Ruan
Abstract:
Optical stochastic cooling (OSC) is expected to enable fast cooling of dense particle beams. Transition from microwave to optical frequencies enables an achievement of stochastic cooling rates which are orders of magnitude higher than ones achievable with the classical microwave based stochastic cooling systems. A subsytem critical to the OSC scheme is the focusing optics used to image radiation f…
▽ More
Optical stochastic cooling (OSC) is expected to enable fast cooling of dense particle beams. Transition from microwave to optical frequencies enables an achievement of stochastic cooling rates which are orders of magnitude higher than ones achievable with the classical microwave based stochastic cooling systems. A subsytem critical to the OSC scheme is the focusing optics used to image radiation from the upstream "pickup" undulator to the downstream "kicker" undulator. In this paper, we present simulation results using wave-optics calculation carried out with the {\sc Synchrotron Radiation Workshop} (SRW). Our simulations are performed in support to a proof-of-principle experiment planned at the Integrable Optics Test Accelerator (IOTA) at Fermilab. The calculations provide an estimate of the energy kick received by a 100-MeV electron as it propagates in the kicker undulator and interacts with the electromagnetic pulse it radiated at an earlier time while traveling through the pickup undulator.
△ Less
Submitted 21 November, 2017;
originally announced November 2017.
-
Spatial Control of Photoemitted Electron Beams using a Micro-Lens-Array Transverse-Shaping Technique
Authors:
A. Halavanau,
G. Qiang,
G. Ha,
E. Wisniewski,
P. Piot,
J. G. Power,
W. Gai
Abstract:
A common issue encountered in photoemission electron sources used in electron accelerators is the transverse inhomogeneity of the laser distribution resulting from the laser-amplification process and often use of frequency up conversion in nonlinear crystals. A inhomogeneous laser distribution on the photocathode produces charged beams with lower beam quality. In this paper, we explore the possibl…
▽ More
A common issue encountered in photoemission electron sources used in electron accelerators is the transverse inhomogeneity of the laser distribution resulting from the laser-amplification process and often use of frequency up conversion in nonlinear crystals. A inhomogeneous laser distribution on the photocathode produces charged beams with lower beam quality. In this paper, we explore the possible use of microlens arrays (fly-eye light condensers) to dramatically improve the transverse uniformity of the drive laser pulse on UV photocathodes. We also demonstrate the use of such microlens arrays to generate transversely-modulated electron beams and present a possible application to diagnose the properties of a magnetized beam.
△ Less
Submitted 24 July, 2017;
originally announced July 2017.
-
Analysis and Measurement of the Transfer Matrix of a 9-cell 1.3-GHz Superconducting Cavity
Authors:
A. Halavanau,
N. Eddy,
D. Edstrom,
E. Harms,
A. Lunin,
P. Piot,
A. Romanov,
J. Ruan,
N. Solyak,
V. Shiltsev
Abstract:
Superconducting linacs are capable of producing intense, stable, high-quality electron beams that have found widespread applications in science and industry. The 9-cell 1.3-GHz superconducting standing-wave accelerating RF cavity originally developed for $e^+/e^-$ linear-collider applications [B. Aunes, {\em et al.} Phys. Rev. ST Accel. Beams {\bf 3}, 092001 (2000)] has been broadly employed in va…
▽ More
Superconducting linacs are capable of producing intense, stable, high-quality electron beams that have found widespread applications in science and industry. The 9-cell 1.3-GHz superconducting standing-wave accelerating RF cavity originally developed for $e^+/e^-$ linear-collider applications [B. Aunes, {\em et al.} Phys. Rev. ST Accel. Beams {\bf 3}, 092001 (2000)] has been broadly employed in various superconducting-linac designs. In this paper we discuss the transfer matrix of such a cavity and present its measurement performed at the Fermilab Accelerator Science and Technology (FAST) facility. The experimental results are found to be in agreement with analytical calculations and numerical simulations.
△ Less
Submitted 22 April, 2017; v1 submitted 27 January, 2017;
originally announced January 2017.
-
IOTA (Integrable Optics Test Accelerator): Facility and Experimental Beam Physics Program
Authors:
Sergei Antipov,
Daniel Broemmelsiek,
David Bruhwiler,
Dean Edstrom,
Elvin Harms,
Valery Lebedev,
Jerry Leibfritz,
Sergei Nagaitsev,
Chong-Shik Park,
Henryk Piekarz,
Philippe Piot,
Eric Prebys,
Alexander Romanov,
Jinhao Ruan,
Tanaji Sen,
Giulio Stancari,
Charles Thangaraj,
Randy Thurman-Keup,
Alexander Valishev,
Vladimir Shiltsev
Abstract:
The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, b…
▽ More
The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, beam dynamics of space-charge effects and their compensation, optical stochastic cooling, and several other experiments. In this article, we present the design and main parameters of the facility, outline progress to date and provide the timeline of the construction, commissioning and research. The physical principles, design, and hardware implementation plans for the major IOTA experiments are also discussed.
△ Less
Submitted 19 December, 2016;
originally announced December 2016.
-
Observation of Two-photon Photoemission from Cesium Telluride Photocathodes Excited by a Near-infrared Laser
Authors:
H. Panuganti,
P. Piot
Abstract:
We explore nonlinear photoemission in cesium telluride (Cs$_2$Te) photocathodes where an ultrashort ($\sim 100$ fs full width at half max) 800-nm infrared laser is used as the drive-laser in lieu of the typical $\sim 266$-nm ultraviolet laser. An important figure of merit for photocathodes, the quantum efficiency, we define here for nonlinear photoemission processes in order to compare with linear…
▽ More
We explore nonlinear photoemission in cesium telluride (Cs$_2$Te) photocathodes where an ultrashort ($\sim 100$ fs full width at half max) 800-nm infrared laser is used as the drive-laser in lieu of the typical $\sim 266$-nm ultraviolet laser. An important figure of merit for photocathodes, the quantum efficiency, we define here for nonlinear photoemission processes in order to compare with linear photoemission. The charge against drive-laser (infrared) energy is studied for different laser energy and intensity values and cross-compared with previously performed similar studies on copper [P. Musumeci et al., \emph{Phys. Rev. Lett.}, \textbf{104}, 084801 (2010)], a metallic photocathode. We particularly observe two-photon photoemission in Cs$_2$Te using the infrared laser in contrast to the anticipated three-photon process as observed for metallic photocathodes.
△ Less
Submitted 9 December, 2016;
originally announced December 2016.
-
Development of a Watt-level Gamma-Ray Source based on High-Repetition-Rate Inverse Compton Scattering
Authors:
D. Mihalcea,
A. Murokh,
P. Piot,
J. Ruan
Abstract:
A high-brilliance ($\sim10^{24}$~photon.s$^{-1}$.mm$^{-2}$.mrd$^{-2}$/0.1\%) gamma-ray source experiment is currently being planned at Fermilab ($E_γ\simeq 1.1$~MeV)~[1]. The source implements a high-repetition-rate inverse Compton scattering by colliding electron bunches formed in a 300-MeV superconducting linac with a high-intensity laser pulse. This paper describes the design rationale along wi…
▽ More
A high-brilliance ($\sim10^{24}$~photon.s$^{-1}$.mm$^{-2}$.mrd$^{-2}$/0.1\%) gamma-ray source experiment is currently being planned at Fermilab ($E_γ\simeq 1.1$~MeV)~[1]. The source implements a high-repetition-rate inverse Compton scattering by colliding electron bunches formed in a 300-MeV superconducting linac with a high-intensity laser pulse. This paper describes the design rationale along with some of technical challenges associated to producing high-repetition-rate collision. The expected performances of the gamma-ray source are also presented.
△ Less
Submitted 5 December, 2016;
originally announced December 2016.
-
Microlens Array Laser Transverse Shaping Technique for Photoemission Electron Source
Authors:
A. Halavanau,
G. Ha,
G. Qiang,
W. Gai,
J. Power,
P. Piot,
E. Wisniewski,
D. Edstrom,
J. Ruan,
J. Santucci
Abstract:
A common issue encountered in photoemission electron sources used in electron accelerators is distortion of the laser spot due to non ideal conditions at all stages of the amplification. Such a laser spot at the cathode may produce asymmetric charged beams that will result in degradation of the beam quality due to space charge at early stages of acceleration and fail to optimally utilize the catho…
▽ More
A common issue encountered in photoemission electron sources used in electron accelerators is distortion of the laser spot due to non ideal conditions at all stages of the amplification. Such a laser spot at the cathode may produce asymmetric charged beams that will result in degradation of the beam quality due to space charge at early stages of acceleration and fail to optimally utilize the cathode surface. In this note we study the possibility of using microlens arrays to dramatically improve the transverse uniformity of the drive laser pulse on UV photocathodes at both Fermilab Accelerator Science \& Technology (FAST) facility and Argonne Wakefield Accelerator (AWA). In particular, we discuss the experimental characterization of the homogeneity and periodic patterned formation at the photocathode. Finally, we compare the experimental results with the paraxial analysis, ray tracing and wavefront propagation software.
△ Less
Submitted 6 September, 2016;
originally announced September 2016.
-
Numerical Simulations of Early-Stage Dynamics of Electron Bunches Emitted from Plasmonic Photocathodes
Authors:
Anusorn Lueangaramwong,
Daniel Mihalcea,
Gerard Andonian,
Philippe Piot
Abstract:
High-brightness electron sources are a key ingredient to the development of compact accelerator-based light sources. The electron sources are commonly based on (linear) photoemission process where a laser pulse with proper wavelength impinges on the surface of a metallic or semiconductor photocathode. Very recently, the use of plasmonic cathodes - cathodes with a nano-patterned surface - have demo…
▽ More
High-brightness electron sources are a key ingredient to the development of compact accelerator-based light sources. The electron sources are commonly based on (linear) photoemission process where a laser pulse with proper wavelength impinges on the surface of a metallic or semiconductor photocathode. Very recently, the use of plasmonic cathodes - cathodes with a nano-patterned surface - have demonstrated great enhancement in quantum efficiencies (Li et al., 2013 [1]). Alternatively, this type of photocathodes could support the formation of structured beams composed of transversely-separated beamlets. In this paper we discuss numerical simulations of the early-stage beam dynamics of the emission process from plasmonic cathodes carried out using the Warp (Friedman et al., 2014 [2]) framework. The model is used to investigate the properties of beams emitted from these photocathode and subsequently combined with particle-in-cell simulations to explore the imaging of cathode pattern after acceleration in a radiofrequency gun.
△ Less
Submitted 5 August, 2016; v1 submitted 16 June, 2016;
originally announced June 2016.
-
Simulation of a cascaded longitudinal space charge amplifier for broadband radiation production using a superconducting linac
Authors:
A. Halavanau,
P. Piot
Abstract:
Longitudinal space charge (LSC) effects are generally considered harmful in free-electron lasers as they can seed unfavorable energy modulations that can result in density modulations with associated emittance dilution. It was pointed out, however, that such "micro-bunching instabilities" could be potentially useful to support the generation of broadband coherent radiation. Therefore there has bee…
▽ More
Longitudinal space charge (LSC) effects are generally considered harmful in free-electron lasers as they can seed unfavorable energy modulations that can result in density modulations with associated emittance dilution. It was pointed out, however, that such "micro-bunching instabilities" could be potentially useful to support the generation of broadband coherent radiation. Therefore there has been an increasing interest in devising accelerator beam lines capable of controlling LSC induced density modulations. In the present paper we augment these previous investigations by combining a grid-less space charge algorithm with the popular particle-tracking program Elegant. This high-fidelity model of the space charge is used to benchmark conventional LSC models. We finally employ the developed model to optimize the performance of a cascaded longitudinal space charge amplifier using beam parameters comparable to the ones achievable at Fermilab Accelerator Science & Technology (FAST) facility currently under commissioning at Fermilab.
△ Less
Submitted 27 July, 2016; v1 submitted 2 October, 2015;
originally announced October 2015.
-
Tailored electron bunches with smooth current profiles for enhanced transformer ratios in beam-driven acceleration
Authors:
Francois Lemery,
Philippe Piot
Abstract:
Collinear high-gradient ${\cal O} (GV/m)$ beam-driven wakefield methods for charged-particle acceleration could be critical to the realization of compact, cost-efficient, accelerators, e.g., in support of TeV-scale lepton colliders or multiple-user free-electron laser facilities. To make these options viable, the high accelerating fields need to be complemented with large transformer ratios $>2$,…
▽ More
Collinear high-gradient ${\cal O} (GV/m)$ beam-driven wakefield methods for charged-particle acceleration could be critical to the realization of compact, cost-efficient, accelerators, e.g., in support of TeV-scale lepton colliders or multiple-user free-electron laser facilities. To make these options viable, the high accelerating fields need to be complemented with large transformer ratios $>2$, a parameter characterizing the efficiency of the energy transfer between a wakefield-exciting "drive" bunch to an accelerated "witness" bunch. While several potential current distributions have been discussed, their practical realization appears challenging due to their often discontinuous nature. In this paper we propose several alternative current profiles which are smooth which also lead to enhanced transformer ratios. We especially explore a laser-shaping method capable of generating one the suggested distributions directly out of a photoinjector and discuss a linac concept that could possible drive a dielectric accelerator.
△ Less
Submitted 22 May, 2015;
originally announced May 2015.
-
Ampère-Class Pulsed Field Emission from Carbon-Nanotube Cathodes in a Radiofrequency Resonator
Authors:
D. Mihalcea,
L. Faillace,
J. Hartzell,
H. Panuganti,
S. M. Boucher,
A. Murokh,
P. Piot,
J. C. T. Thangaraj
Abstract:
Pulsed field emission from cold carbon-nanotube cathodes placed in a radiofrequency resonant cavity was observed. The cathodes were located on the backplate of a conventional $1+\frac{1}{2}$-cell resonant cavity operating at 1.3-GHz and resulted in the production of bunch train with maximum average current close to 0.7 Ampère. The measured Fowler-Nordheim characteristic, transverse emittance, and…
▽ More
Pulsed field emission from cold carbon-nanotube cathodes placed in a radiofrequency resonant cavity was observed. The cathodes were located on the backplate of a conventional $1+\frac{1}{2}$-cell resonant cavity operating at 1.3-GHz and resulted in the production of bunch train with maximum average current close to 0.7 Ampère. The measured Fowler-Nordheim characteristic, transverse emittance, and pulse duration are presented and, when possible, compared to numerical simulations. The implications of our results to high-average-current electron sources are briefly discussed.
△ Less
Submitted 10 February, 2015;
originally announced February 2015.
-
ASTA at Fermilab: Accelerator Physics and Accelerator Education Programs at the Modern Accelerator R&D Users Facility for HEP and Accelerator Applications
Authors:
V. Shiltsev,
P. Piot
Abstract:
We present the current and planned beam physics research program and accelerator education program at Advanced Superconducting Test Accelerator (ASTA) at Fermilab.
We present the current and planned beam physics research program and accelerator education program at Advanced Superconducting Test Accelerator (ASTA) at Fermilab.
△ Less
Submitted 18 September, 2014;
originally announced September 2014.
-
Formation of Compressed Flat Electron Beams with High Transverse-Emittance Ratios
Authors:
J. Zhu,
P. Piot,
D. Mihalcea,
C. R. Prokop
Abstract:
Flat beams -- beams with asymmetric transverse emittances -- have important applications in novel light-source concepts, advanced-acceleration schemes and could possibly alleviate the need for damping rings in lepton colliders. Over the last decade, a flat-beam-generation technique based on the conversion of an angular-momentum-dominated beam was proposed and experimentally tested. In this paper w…
▽ More
Flat beams -- beams with asymmetric transverse emittances -- have important applications in novel light-source concepts, advanced-acceleration schemes and could possibly alleviate the need for damping rings in lepton colliders. Over the last decade, a flat-beam-generation technique based on the conversion of an angular-momentum-dominated beam was proposed and experimentally tested. In this paper we explore the production of compressed flat beams. We especially investigate and optimize the flat-beam transformation for beams with substantial fractional energy spread. We use as a simulation example the photoinjector of the Fermilab's Advanced Superconducting Test Accelerator (ASTA). The optimizations of the flat beam generation and compression at ASTA were done via start-to-end numerical simulations for bunch charges of 3.2 nC, 1.0 nC and 20 pC at ~37 MeV. The optimized emittances of flat beams with different bunch charges were found to be 0.25 μm (emittance ratio is ~400), 0.13 μm, 15 nm before compression, and 0.41 μm, 0.20 μm, 16 nm after full compression, respectively with peak currents as high as 5.5 kA for a 3.2-nC flat beam. These parameters are consistent with requirements needed to excite wakefields in asymmetric dielectric-lined waveguides or produce significant photon flux using small-gap micro-undulators.
△ Less
Submitted 5 September, 2014;
originally announced September 2014.