Showing 1–50 of 91 results for author: Raabe, D

Grain boundaries control lithiation of solid solution substrates in lithium metal batteries

Authors: Leonardo Shoji Aota, Chanwon Jung, Siyuan Zhang, Ömer K. Büyükuslu, Poonam Yadav, Mahander Pratap Singh, Xinren Chen, Eric Woods, Christina Scheu, Se-Ho Kim, Dierk Raabe, Baptiste Gault

Abstract: The development of sustainable transportation and communication systems requires an increase in both energy density and capacity retention of Li-batteries. Using substrates forming a solid solution with body centered cubic Li enhances the cycle stability of anode-less batteries. However, it remains unclear how the substrate microstructure affects the lithiation behavior. Here, we deploy a correlat… ▽ More The development of sustainable transportation and communication systems requires an increase in both energy density and capacity retention of Li-batteries. Using substrates forming a solid solution with body centered cubic Li enhances the cycle stability of anode-less batteries. However, it remains unclear how the substrate microstructure affects the lithiation behavior. Here, we deploy a correlative, near-atomic scale probing approach through combined ion- and electron-microscopy to examine the distribution of Li in Li-Ag diffusion couples as model system. We reveal that Li regions with over 93.8% at.% nucleate within Ag at random high angle grain boundaries, whereas grain interiors are not lithiated. We evidence the role of kinetics and mechanical constraint from the microstructure over equilibrium thermodynamics in dictating the lithiation process. The findings suggest that grain size and grain boundary character are critical to enhance the electrochemical performance of interlayers/electrodes, particularly for improving lithiation kinetics and hence reducing dendrite formation. △ Less

Submitted 12 July, 2024; originally announced July 2024.

Segregation at prior austenite grain boundaries: the competition between boron and hydrogen

Authors: Guillaume Hachet, Ali Tehranchi, Hao Shi, Manoj Prabhakar, Shaolou Wei, Katja Angenendt, Stefan Zaefferer, Baptiste Gault, Binhan Sun, Dirk Ponge, Dierk Raabe

Abstract: The interaction between boron and hydrogen at grain boundaries has been investigated experimentally and numerically in boron-doped and boron-free martensitic steels using thermal desorption spectrometry (TDS) and ab initio calculations. The calculations show that boron, which mostly segregates into prior austenite grain boundaries (PAGBs), repels hydrogen. This behavior has also been observed usin… ▽ More The interaction between boron and hydrogen at grain boundaries has been investigated experimentally and numerically in boron-doped and boron-free martensitic steels using thermal desorption spectrometry (TDS) and ab initio calculations. The calculations show that boron, which mostly segregates into prior austenite grain boundaries (PAGBs), repels hydrogen. This behavior has also been observed using TDS measurements, with the disappearance of one peak when boron is incorporated into the microstructure. Additionally, the microstructure of both boron-doped and boron-free steels has been studied through electron backscattered diffraction, electron channeling contrast imaging, synchrotron X-ray measurements, and atom probe tomography. While both steels have a similar grain size, grain boundary distribution, and dislocation densities, pronounced boron segregation into PAGBs is observed for boron-doped steels. Therefore, the equilibrium hydrogen concentration in different trapping sites has been evaluated using the Langmuir-McLean approximation. This thermodynamic model shows that the distribution of hydrogen is identical for all traps when the total hydrogen concentration is low for boron-free steel. However, when it increases, traps of the lowest segregation energies (mostly PAGBs) are firstly saturated, which promotes failure initiation at this defect type. This finding partially explains why PAGBs are the weakest microstructure feature when martensitic steels are exposed to hydrogen-containing environments. △ Less

Submitted 4 July, 2024; originally announced July 2024.

Comments: Pre-printed version, also submitted to hal science: https://hal.science/hal-04631250

Roadmap on Data-Centric Materials Science

Authors: Stefan Bauer, Peter Benner, Tristan Bereau, Volker Blum, Mario Boley, Christian Carbogno, C. Richard A. Catlow, Gerhard Dehm, Sebastian Eibl, Ralph Ernstorfer, Ádám Fekete, Lucas Foppa, Peter Fratzl, Christoph Freysoldt, Baptiste Gault, Luca M. Ghiringhelli, Sajal K. Giri, Anton Gladyshev, Pawan Goyal, Jason Hattrick-Simpers, Lara Kabalan, Petr Karpov, Mohammad S. Khorrami, Christoph Koch, Sebastian Kokott , et al. (36 additional authors not shown)

Abstract: Science is and always has been based on data, but the terms "data-centric" and the "4th paradigm of" materials research indicate a radical change in how information is retrieved, handled and research is performed. It signifies a transformative shift towards managing vast data collections, digital repositories, and innovative data analytics methods. The integration of Artificial Intelligence (AI) a… ▽ More Science is and always has been based on data, but the terms "data-centric" and the "4th paradigm of" materials research indicate a radical change in how information is retrieved, handled and research is performed. It signifies a transformative shift towards managing vast data collections, digital repositories, and innovative data analytics methods. The integration of Artificial Intelligence (AI) and its subset Machine Learning (ML), has become pivotal in addressing all these challenges. This Roadmap on Data-Centric Materials Science explores fundamental concepts and methodologies, illustrating diverse applications in electronic-structure theory, soft matter theory, microstructure research, and experimental techniques like photoemission, atom probe tomography, and electron microscopy. While the roadmap delves into specific areas within the broad interdisciplinary field of materials science, the provided examples elucidate key concepts applicable to a wider range of topics. The discussed instances offer insights into addressing the multifaceted challenges encountered in contemporary materials research. △ Less

Submitted 1 May, 2024; v1 submitted 1 February, 2024; originally announced February 2024.

Comments: Review, outlook, roadmap, perspective

Chemical heterogeneity enhances hydrogen resistance in high-strength steels

Authors: Binhan Sun, Wenjun Lu, Ran Ding, Surendra Kumar Makineni, Baptiste Gault, Chun-Hung Wu, Di Wan, Hao Chen, Dirk Ponge, Dierk Raabe

Abstract: When H, the lightest, smallest and most abundant atom in the universe, makes its way into a high-strength alloy (>650 MPa), the material's load-bearing capacity is abruptly lost. This phenomenon, known as H embrittlement, was responsible for the catastrophic and unpredictable failure of large engineering structures in service. The inherent antagonism between high strength requirements and H embrit… ▽ More When H, the lightest, smallest and most abundant atom in the universe, makes its way into a high-strength alloy (>650 MPa), the material's load-bearing capacity is abruptly lost. This phenomenon, known as H embrittlement, was responsible for the catastrophic and unpredictable failure of large engineering structures in service. The inherent antagonism between high strength requirements and H embrittlement susceptibility strongly hinders the design of lightweight yet reliable structural components needed for carbon-free hydrogen-propelled industries and reduced-emission transportation solutions. Inexpensive and scalable alloying and microstructural solutions that enable both, an intrinsically high resilience to H and high mechanical performance, must be found. Here we introduce a counterintuitive strategy to exploit typically undesired chemical heterogeneity within the material's microstructure that allows the local enhancement of crack resistance and local H trapping, thereby enhancing the resistance against H embrittlement. We deploy this approach to a lightweight, high-strength steel and produce a high-number density Mn-rich zones dispersed within the microstructure. These solute-rich buffer regions allow for local micro-tuning of the phase stability, arresting H-induced microcracks thus interrupting the H-assisted damage evolution chain, regardless of how and when H is introduced and also regardless of the underlying embrittling mechanisms. A superior H embrittlement resistance, increased by a factor of two compared to a reference material with a homogeneous solute distribution within each microstructure constituent, is achieved at no expense of the material's strength and ductility. △ Less

Submitted 30 August, 2023; originally announced August 2023.

Constructing phase diagrams for defects by correlated atomic-scale characterization

Authors: Xuyang Zhou, Prince Mathews, Benjamin Berkels, Saba Ahmad, Amel Shamseldeen Ali Alhassan, Philipp Keuter, Jochen M. Schneider, Dierk Raabe, Jörg Neugebauer, Gerhard Dehm, Tilmann Hickel, Christina Scheu, Siyuan Zhang

Abstract: Phase transformations and crystallographic defects are two essential tools to drive innovations in materials. Bulk materials design via tuning chemical compositions has been systematized using phase diagrams. We show here that the same thermodynamic concept can be applied to understand the chemistry at defects. We present a combined experimental and modelling approach to scope and build phase diag… ▽ More Phase transformations and crystallographic defects are two essential tools to drive innovations in materials. Bulk materials design via tuning chemical compositions has been systematized using phase diagrams. We show here that the same thermodynamic concept can be applied to understand the chemistry at defects. We present a combined experimental and modelling approach to scope and build phase diagrams for defects. The discovery was enabled by triggering phase transformations of individual defects through local alloying, and sequentially imaging the structural and chemical changes using atomic-resolution scanning transmission electron microscopy. By observing atomic-scale phase transformations of a Mg grain boundary through Ga alloying, we exemplified the method to construct a grain boundary phase diagram using ab initio simulations and thermodynamic principles. The methodology enables a systematic development of defect phase diagrams to propel a new paradigm for materials design utilizing chemical complexity and phase transformations at defects. △ Less

Submitted 31 August, 2023; v1 submitted 16 March, 2023; originally announced March 2023.

The fate of water in hydrogen-based iron oxide reduction

Authors: Ayman A. El-Zoka, Leigh T. Stephenson, Se-Ho Kim, Baptiste Gault, Dierk Raabe

Abstract: Gas-solid reactions are cornerstones of many catalytic and redox processes that will underpin the energy and sustainability transition. The specific case of hydrogen-based iron oxide reduction is the foundation to render the global steel industry fossil-free, an essential target as iron production is the largest single industrial emitter of carbon dioxide. Our perception of gas-solid reactions has… ▽ More Gas-solid reactions are cornerstones of many catalytic and redox processes that will underpin the energy and sustainability transition. The specific case of hydrogen-based iron oxide reduction is the foundation to render the global steel industry fossil-free, an essential target as iron production is the largest single industrial emitter of carbon dioxide. Our perception of gas-solid reactions has not only been limited by the availability of state-of-the-art techniques which can delve into the reacted solids in great structural and chemical detail, but we continue to miss an important reaction partner that defines the thermodynamics and kinetics of gas phase reactions: the gas molecules. In this investigation, we use the latest development in cryogenic atom probe tomography to study the quasi in-situ evolution of gas phase heavy water at iron-iron oxide interfaces resulting from the direct reduction of iron oxide by deuterium gas at 700°C. The findings provide new insights into the formation kinetics and location of water formed during hydrogen-based reduction of FeO, an its interaction with the ongoing redox reaction. △ Less

Submitted 16 January, 2023; originally announced January 2023.

Atomic motifs govern the decoration of grain boundaries by interstitial solutes

Authors: Xuyang Zhou, Ali Ahmadian, Baptiste Gault, Colin Ophus, Christian H. Liebscher, Gerhard Dehm, Dierk Raabe

Abstract: Grain boundaries, the two-dimensional (2D) defects between differently oriented crystals, control mechanical and transport properties of materials. Our fundamental understanding of grain boundaries is still incomplete even after nearly a century and a half of research since Sorby first imaged grains. Here, we present a systematic study, over 9 orders of magnitude of size scales, in which we analyz… ▽ More Grain boundaries, the two-dimensional (2D) defects between differently oriented crystals, control mechanical and transport properties of materials. Our fundamental understanding of grain boundaries is still incomplete even after nearly a century and a half of research since Sorby first imaged grains. Here, we present a systematic study, over 9 orders of magnitude of size scales, in which we analyze 2D defects between two neighboring crystals across five hierarchy levels and investigate their crystallographic, compositional, and electronic features. The levels are (a) the macroscale interface alignment and grain misorientation (held constant here); (b) the systematic mesoscopic change in the inclination of the grain boundary plane for the same orientation difference; (c) the facets, atomic motifs (structural units), and internal nanoscopic defects within the boundary plane; (d) the grain boundary chemistry; and (e) the electronic structure of the atomic motifs. As a model material, we use Fe alloyed with B and C, exploiting the strong interdependence of interface structure and chemistry in this system. This model system is the basis of the 1.9 billion tons of steel produced annually and has an eminent role as a catalyst. Surprisingly, we find that even a change in the inclination of the GB plane with identical misorientation impacts GB composition and atomic arrangement. Thus, it is the smallest structural hierarchical level, the atomic motifs, which control the most important chemical properties of the grain boundaries. This finding not only closes a missing link between the structure and chemical composition of such defects but also enables the targeted design and passivation of the chemical state of grain boundaries to free them from their role as entry gates for corrosion, hydrogen embrittlement, or mechanical failure. △ Less

Submitted 21 November, 2022; v1 submitted 15 November, 2022; originally announced November 2022.

Chemical Partitioning at Crystalline Defects in PtAu as a Pathway to Stabilize Electrocatalysts

Authors: Xuyang Zhou, Olga Kasian, Ting Luo, Se-Ho Kim, Chenyu Zhang, Siyuan Zhang, Subin Lee, Gregory B. Thompson, Gerhard Dehm, Baptiste Gault, Dierk Raabe

Abstract: Dissolution of electrocatalysts during long-term and dynamic operation is a challenging problem in energy conversion and storage devices such as fuel cells and electrolyzers. To develop stable electrocatalysts, we adopt the design concept of segregation engineering, which uses solute segregation prone to electrochemical dissolution at internal defects, i.e., grain boundaries and dislocations. We s… ▽ More Dissolution of electrocatalysts during long-term and dynamic operation is a challenging problem in energy conversion and storage devices such as fuel cells and electrolyzers. To develop stable electrocatalysts, we adopt the design concept of segregation engineering, which uses solute segregation prone to electrochemical dissolution at internal defects, i.e., grain boundaries and dislocations. We showcase the feasibility of this approach by stabilizing a model Pt catalyst with an addition of more noble Au (approximately 5 atomic percent). We characterized the defects' nanoscale structure and chemistry, and monitored the electrochemical dissolution of Pt and PtAu alloys by online inductively coupled plasma mass spectrometry. Once segregated to defects, Au atoms can stabilize and hence passivate the most vulnerable sites against electrochemical dissolution and improve the stability and longevity of the Pt electrocatalysts by more than an order of magnitude. This opens pathways to use solute segregation to defects for the development of more stable nanoscale electrocatalysts, a concept applicable for a wide range of catalytic systems. △ Less

Submitted 27 September, 2022; originally announced September 2022.

Computational Discovery of Energy-Efficient Heat Treatment for Microstructure Design using Deep Reinforcement Learning

Authors: Jaber R. Mianroodi, Nima H. Siboni, Dierk Raabe

Abstract: Deep Reinforcement Learning (DRL) is employed to develop autonomously optimized and custom-designed heat-treatment processes that are both, microstructure-sensitive and energy efficient. Different from conventional supervised machine learning, DRL does not rely on static neural network training from data alone, but a learning agent autonomously develops optimal solutions, based on reward and penal… ▽ More Deep Reinforcement Learning (DRL) is employed to develop autonomously optimized and custom-designed heat-treatment processes that are both, microstructure-sensitive and energy efficient. Different from conventional supervised machine learning, DRL does not rely on static neural network training from data alone, but a learning agent autonomously develops optimal solutions, based on reward and penalty elements, with reduced or no supervision. In our approach, a temperature-dependent Allen-Cahn model for phase transformation is used as the environment for the DRL agent, serving as the model world in which it gains experience and takes autonomous decisions. The agent of the DRL algorithm is controlling the temperature of the system, as a model furnace for heat-treatment of alloys. Microstructure goals are defined for the agent based on the desired microstructure of the phases. After training, the agent can generate temperature-time profiles for a variety of initial microstructure states to reach the final desired microstructure state. The agent's performance and the physical meaning of the heat-treatment profiles generated are investigated in detail. In particular, the agent is capable of controlling the temperature to reach the desired microstructure starting from a variety of initial conditions. This capability of the agent in handling a variety of conditions paves the way for using such an approach also for recycling-oriented heat treatment process design where the initial composition can vary from batch to batch, due to impurity intrusion, and also for the design of energy-efficient heat treatments. For testing this hypothesis, an agent without penalty on the total consumed energy is compared with one that considers energy costs. The energy cost penalty is imposed as an additional criterion on the agent for finding the optimal temperature-time profile. △ Less

Submitted 22 September, 2022; originally announced September 2022.

Effect of Pore Formation on Redox-Driven Phase Transformation

Authors: Xuyang Zhou, Yang Bai, Ayman A. El-Zoka, Se-Ho Kim, Yan Ma, Christian H. Liebscher, Baptiste Gault, Jaber R. Mianroodi, Gerhard Dehm, Dierk Raabe

Abstract: When solid-state redox-driven phase transformations are associated with mass loss, vacancies are produced that develop into pores. These pores can influence the kinetics of certain redox and phase transformation steps. We investigated the structural and chemical mechanisms in and at pores in a combined experimental-theoretical study, using the reduction of iron oxide by hydrogen as a model system.… ▽ More When solid-state redox-driven phase transformations are associated with mass loss, vacancies are produced that develop into pores. These pores can influence the kinetics of certain redox and phase transformation steps. We investigated the structural and chemical mechanisms in and at pores in a combined experimental-theoretical study, using the reduction of iron oxide by hydrogen as a model system. The redox product (water) accumulates inside the pores and shifts the local equilibrium at the already reduced material back towards re-oxidation into cubic-Fe1-xO (where x refers to Fe deficiency, space group Fm3-m). This effect helps to understand the sluggish reduction of cubic-Fe1-xO by hydrogen, a key process for future sustainable steelmaking. △ Less

Submitted 6 March, 2023; v1 submitted 19 September, 2022; originally announced September 2022.

An artificial neural network for surrogate modeling of stress fields in viscoplastic polycrystalline materials

Authors: Mohammad S. Khorrami, Jaber R. Mianroodi, Nima H. Siboni, Pawan Goyal, Bob Svendsen, Peter Benner, Dierk Raabe

Abstract: The purpose of this work is the development of an artificial neural network (ANN) for surrogate modeling of the mechanical response of viscoplastic grain microstructures. To this end, a U-Net-based convolutional neural network (CNN) is trained to account for the history dependence of the material behavior. The training data take the form of numerical simulation results for the von Mises stress fie… ▽ More The purpose of this work is the development of an artificial neural network (ANN) for surrogate modeling of the mechanical response of viscoplastic grain microstructures. To this end, a U-Net-based convolutional neural network (CNN) is trained to account for the history dependence of the material behavior. The training data take the form of numerical simulation results for the von Mises stress field under quasi-static tensile loading. The trained CNN (tCNN) can accurately reproduce both the average response as well as the local von Mises stress field. The tCNN calculates the von Mises stress field of grain microstructures not included in the training dataset about 500 times faster than its calculation based on the numerical solution with a spectral solver of the corresponding initial-boundary-value problem. The tCNN is also successfully applied to other types of microstructure morphologies (e.g., matrix-inclusion type topologies) and loading levels not contained in the training dataset. △ Less

Submitted 29 August, 2022; originally announced August 2022.

Sustainable steel through hydrogen plasma reduction of iron ore: process, kinetics, microstructure, chemistry

Authors: I. R. Souza Filho, Y. Ma, M. Kulse, D. Ponge, B. Gault, H. Springer, D. Raabe

Abstract: Fe- and steelmaking is the largest single industrial CO2 emitter, accounting for 6.5% of all CO2 emissions on the planet. This fact challenges the current technologies to achieve carbon-lean steel production and to align with the requirement of a drastic reduction of 80% in all CO2 emissions by around 2050. Thus, alternative reduction technologies have to be implemented for extracting iron from it… ▽ More Fe- and steelmaking is the largest single industrial CO2 emitter, accounting for 6.5% of all CO2 emissions on the planet. This fact challenges the current technologies to achieve carbon-lean steel production and to align with the requirement of a drastic reduction of 80% in all CO2 emissions by around 2050. Thus, alternative reduction technologies have to be implemented for extracting iron from its ores. The H-based direct reduction has been explored as a sustainable route to mitigate CO2 emissions, where the reduction kinetics of the intermediate oxide product FexO wustite into Fe is the rate-limiting step of the process. The total reaction has an endothermic net energy balance. Reduction based on a H plasma may offer an attractive alternative. Here, we present a study about the reduction of hematite using H plasma. The evolution of both, chemical composition and phase transformations was investigated in several intermediate states. We found that hematite reduction kinetics depends on the balance between the initial input mass and the arc power. For an optimized input mass-arc power ratio, complete reduction was obtained within 15 min of exposure to the H plasma. The wustite reduction is also the rate-limiting step towards complete reduction. Nonetheless, the reduction reaction is exothermic, and its rates are comparable with those found in H-based direct reduction. Chemical and microstructure analysis revealed that the gangue elements partition to the remaining oxide regions, probed by energy dispersive spectroscopy and atom probe tomography. Si-enrichment was observed in the interdendritic fayalite domains, at the wustite/Fe hetero-interfaces and in the primarily solidified oxide particles inside the Fe. With proceeding reduction, however, such elements are gradually removed from the samples so that the final iron product is nearly free of gangue-related impurities. △ Less

Submitted 1 August, 2022; originally announced August 2022.

Journal ref: Acta Materialia Volume 213, July 2021, 116971

Understanding the degradation of a model Si-anode in Li-ion battery at the atomic-scale

Authors: Se-Ho Kim, Kang Dong, Huan Zhao, Ayman A. El-Zoka, Xuyang Zhou, Eric V. Woods, Finn Giuliani, Ingo Manke, Dierk Raabe, Baptiste Gault

Abstract: Si-anodes have long been candidates thanks to an expected ten-fold increase in capacity compared to graphite. However, details of the mechanisms governing their degradation remain elusive, hindering science-guided development of long-lived Si-based anodes. Here we demonstrate how the latest developments in cryo-atom probe tomography enable the in-depth analysis of the electrode and electrolyte, an… ▽ More Si-anodes have long been candidates thanks to an expected ten-fold increase in capacity compared to graphite. However, details of the mechanisms governing their degradation remain elusive, hindering science-guided development of long-lived Si-based anodes. Here we demonstrate how the latest developments in cryo-atom probe tomography enable the in-depth analysis of the electrode and electrolyte, and their interface at atomic-level. △ Less

Submitted 17 July, 2022; originally announced July 2022.

A mechanically strong and ductile soft magnet with extremely low coercivity

Authors: Liuliu Han, Fernando Maccari, Isnaldi R. Souza Filho, Nicolas J. Peter, Ye Wei, Baptiste Gault, Oliver Gutfleisch, Zhiming Li, Dierk Raabe

Abstract: Soft magnetic materials (SMMs) serve in electrical applications and sustainable energy supply, allowing magnetic flux variation in response to changes in applied magnetic field, at low energy loss1. The electrification of transport, households and manufacturing leads to an increase in energy consumption due to hysteresis losses2. Therefore, minimizing coercivity, which scales these losses, is cruc… ▽ More Soft magnetic materials (SMMs) serve in electrical applications and sustainable energy supply, allowing magnetic flux variation in response to changes in applied magnetic field, at low energy loss1. The electrification of transport, households and manufacturing leads to an increase in energy consumption due to hysteresis losses2. Therefore, minimizing coercivity, which scales these losses, is crucial3. Yet, meeting this target alone is not enough: SMMs in electrical engines must withstand severe mechanical loads, i.e., the alloys need high strength and ductility4. This is a fundamental design challenge, as most methods that enhance strength introduce stress fields that can pin magnetic domains, thus increasing coercivity and hysteretic losses5. Here, we introduce an approach to overcome this dilemma. We have designed a Fe-Co-Ni-Ta-Al multicomponent alloy with ferromagnetic matrix and paramagnetic coherent nanoparticles (~91 nm size, ~55% volume fraction). They impede dislocation motion, enhancing strength and ductility. Their small size, low coherency and small magnetostatic energy create an interaction volume below the magnetic domain wall width, leading to minimal domain wall pinning, thus maintaining the soft magnetic properties. The alloy has a tensile strength of 1336 MPa at 54% tensile elongation, extremely low coercivity of 78 A/m (<1 Oe), moderate saturation magnetization of 100 Am2/kg, and high electrical resistivity of 103 μみゅーΩおめが u Ohm cm. △ Less

Submitted 2 June, 2022; originally announced July 2022.

Comments: 24 pages

Combined modeling and experimental characterization of Mn segregation and spinodal decomposition along dislocation lines in Fe-Mn alloys

Authors: Jaber Rezaei Mianroodi, Pratheek Shanthraj, Alisson Kwiatkowski da Silva, Bob Svendsen, Dierk Raabe

Abstract: Mn enrichment at dislocations in Fe-Mn alloys due to segregation and spinodal decomposition along the dislocation line is studied via modeling and experimental characterization. To model these phenomena, both finite-deformation microscopic phase-field chemomechanics (MPFCM) and Monte Carlo molecular dynamics (MCMD) are employed. MPFCM calibration is carried out with the same Fe-Mn MEAM-based poten… ▽ More Mn enrichment at dislocations in Fe-Mn alloys due to segregation and spinodal decomposition along the dislocation line is studied via modeling and experimental characterization. To model these phenomena, both finite-deformation microscopic phase-field chemomechanics (MPFCM) and Monte Carlo molecular dynamics (MCMD) are employed. MPFCM calibration is carried out with the same Fe-Mn MEAM-based potential used in MCMD, as well as CALPHAD data. Simulation results for Mn segregation to, and spinodal decomposition along, straight screw and edge dislocations as well as dislocation loops, are compared with characterization results from atom probe tomography (APT) for two Fe-Mn alloy compositions. In contrast to classical Volterra dislocation theory, both MPFCM and MCMD predict a non-zero hydrostatic stress field in screw cores. Being of much smaller magnitude than the hydrostatic stress in straight edge cores, much less solute segregates to screw than to edge cores. In addition, the segregated amount in screw cores is below the critical concentration of 0.157 for the onset of spinodal decomposition along the line. Results from MPFCM-based modeling imply that the concentration dependence of the solute misfit distortion and resulting dependence of the elastic energy density on concentration have the strongest effect. The maximum amount of Mn segregating to straight edge dislocations predicted by MPFCM agrees well with APT results. The MPFCM model for Fe-Mn predicts little or no variation in Mn concentration along a straight dislocation line, in contrast to the APT results. As shown by the example of a dislocation loop in the current work, a change in the hydrostatic stress along the line due to changing character of dislocation does lead to a corresponding variation in Mn concentration. Such a variation in Mn concentration can also then be expected along a dislocation line with kinks or jogs. △ Less

Submitted 8 June, 2022; originally announced June 2022.

floodlight -- A high-level, data-driven sports analytics framework

Authors: Dominik Raabe, Henrik Biermann, Manuel Bassek, Martin Wohlan, Rumena Komitova, Robert Rein, Tobias Kuppens Groot, Daniel Memmert

Abstract: The present work introduces floodlight, an open source Python package built to support and automate team sport data analysis. It is specifically designed for the scientific analysis of spatiotemporal tracking data, event data, and game codes in disciplines such as match and performance analysis, exercise physiology, training science, and collective movement behavior analysis. It is completely prov… ▽ More The present work introduces floodlight, an open source Python package built to support and automate team sport data analysis. It is specifically designed for the scientific analysis of spatiotemporal tracking data, event data, and game codes in disciplines such as match and performance analysis, exercise physiology, training science, and collective movement behavior analysis. It is completely provider- and sports-independent and includes a high-level interface suitable for programming beginners. The package includes routines for most aspects of the data analysis process, including dedicated data classes, file parsing functionality, public dataset APIs, pre-processing routines, common data models and several standard analysis algorithms previously used in the literature, as well as basic visualization functionality. The package is intended to make team sport data analysis more accessible to sport scientists, foster collaborations between sport and computer scientists, and strengthen the community's culture of open science and inclusion of previous works in future works. △ Less

Submitted 3 June, 2022; originally announced June 2022.

Comments: 5 pages, 1 figure. For associated package, see https://pypi.org/project/floodlight/. For source code, see https://github.com/floodlight-sports/floodlight . For documentation, see https://floodlight.readthedocs.io

Accelerating phase-field-based simulation via machine learning

Authors: Iman Peivaste, Nima H. Siboni, Ghasem Alahyarizadeh, Reza Ghaderi, Bob Svendsen, Dierk Raabe, Jaber R. Mianroodi

Abstract: Phase-field-based models have become common in material science, mechanics, physics, biology, chemistry, and engineering for the simulation of microstructure evolution. Yet, they suffer from the drawback of being computationally very costly when applied to large, complex systems. To reduce such computational costs, a Unet-based artificial neural network is developed as a surrogate model in the cur… ▽ More Phase-field-based models have become common in material science, mechanics, physics, biology, chemistry, and engineering for the simulation of microstructure evolution. Yet, they suffer from the drawback of being computationally very costly when applied to large, complex systems. To reduce such computational costs, a Unet-based artificial neural network is developed as a surrogate model in the current work. Training input for this network is obtained from the results of the numerical solution of initial-boundary-value problems (IBVPs) based on the Fan-Chen model for grain microstructure evolution. In particular, about 250 different simulations with varying initial order parameters are carried out and 200 frames of the time evolution of the phase fields are stored for each simulation. The network is trained with 90% of this data, taking the $i$-th frame of a simulation, i.e. order parameter field, as input, and producing the $(i+1)$-th frame as the output. Evaluation of the network is carried out with a test dataset consisting of 2200 microstructures based on different configurations than originally used for training. The trained network is applied recursively on initial order parameters to calculate the time evolution of the phase fields. The results are compared to the ones obtained from the conventional numerical solution in terms of the errors in order parameters and the system's free energy. The resulting order parameter error averaged over all points and all simulation cases is 0.005 and the relative error in the total free energy in all simulation boxes does not exceed 1%. △ Less

Submitted 4 May, 2022; originally announced May 2022.

Phase-Field Modeling of Coupled Brittle-Ductile Fracture in Aluminum Alloys

Authors: Samad Vakili, Pratheek Shanthraj, Franz Roters, Jaber R. Mianroodi, Dierk Raabe

Abstract: Fracture in aluminum alloys with precipitates involves at least two mechanisms, namely, ductile fracture of the aluminum-rich matrix and brittle fracture of the precipitates. In this work, a coupled crystal plasticity-phase field model for mixed ductile-brittle failure modes is formulated and used to investigate the effect of precipitate morphology and size distribution on damage evolution in alum… ▽ More Fracture in aluminum alloys with precipitates involves at least two mechanisms, namely, ductile fracture of the aluminum-rich matrix and brittle fracture of the precipitates. In this work, a coupled crystal plasticity-phase field model for mixed ductile-brittle failure modes is formulated and used to investigate the effect of precipitate morphology and size distribution on damage evolution in aluminum alloys. A thermodynamically consistent framework for elastic and plastic work dissipation in the fracture process zone is used to formulate the coupled constitutive behavior for brittle and ductile damage, respectively. Representative Volume Elements (RVE) with varying particle morphology and orientation were generated and their uni-axial loading was simulated to assess the damage resistance of the different model microstructures. For critical energy release rate $G_c$ values of the aluminum matrix ranging from 4 to 8~Jm$^{-2}$ for single crystals and from 10 to 16~Jm$^{-2}$ for polycrystals, the model predicts a change in failure modes from particle debonding to cracking followed by ductile matrix failure. The change of particle failure mechanism as a result of increased $G_c$ is observed for both, single and polycrystalline model microstructures. For the case of particle debonding, microstructures with circular or ellipsoidal particles (with the major axis perpendicular to the loading direction) show a higher ductility and fracture work compared to the other studied cases. In the case of particle cracking, microstructures with ellipsoidal particles aligned parallel to the loading axis show a higher ductility and fracture work among the investigated cases. The simulations qualitatively reproduce the experimentally observed particle failure mechanisms (cracking and debonding) for two different matrix alloy classes (commercially pure and 2xxx alloys) reinforced with ceramic particles. △ Less

Submitted 29 April, 2022; originally announced April 2022.

Machine learning-enabled high-entropy alloy discovery

Authors: Ziyuan Rao, PoYen Tung, Ruiwen Xie, Ye Wei, Hongbin Zhang, Alberto Ferrari, T. P. C. Klaver, Fritz Körmann, Prithiv Thoudden Sukumar, Alisson Kwiatkowski da Silva, Yao Chen, Zhiming Li, Dirk Ponge, Jörg Neugebauer, Oliver Gutfleisch, Stefan Bauer, Dierk Raabe

Abstract: High-entropy alloys are solid solutions of multiple principal elements, capable of reaching composition and feature regimes inaccessible for dilute materials. Discovering those with valuable properties, however, relies on serendipity, as thermodynamic alloy design rules alone often fail in high-dimensional composition spaces. Here, we propose an active-learning strategy to accelerate the design of… ▽ More High-entropy alloys are solid solutions of multiple principal elements, capable of reaching composition and feature regimes inaccessible for dilute materials. Discovering those with valuable properties, however, relies on serendipity, as thermodynamic alloy design rules alone often fail in high-dimensional composition spaces. Here, we propose an active-learning strategy to accelerate the design of novel high-entropy Invar alloys in a practically infinite compositional space, based on very sparse data. Our approach works as a closed-loop, integrating machine learning with density-functional theory, thermodynamic calculations, and experiments. After processing and characterizing 17 new alloys (out of millions of possible compositions), we identified 2 high-entropy Invar alloys with extremely low thermal expansion coefficients around 2*10-6 K-1 at 300 K. Our study thus opens a new pathway for the fast and automated discovery of high-entropy alloys with optimal thermal, magnetic and electrical properties. △ Less

Submitted 28 February, 2022; originally announced February 2022.

Green steel at its crossroads: hybrid hydrogen-based reduction of iron ores

Authors: Isnaldi R. Souza Filho1, Hauke Springer, Yan Ma, Ankita Mahajan, Cauê C. da Silva, Michael Kulse, Dierk Raabe

Abstract: Iron- and steelmaking cause ~7% of the global CO2 emissions, due to the use of carbon for the reduction of iron ores. Replacing carbon by hydrogen as the reductant offers a pathway to reduce emissions. However, production of hydrogen using renewable energy will remain a bottlenecks, because making the annual crude steel production of 1.8 billion tons sustainable requires a minimum amount of ~97 mi… ▽ More Iron- and steelmaking cause ~7% of the global CO2 emissions, due to the use of carbon for the reduction of iron ores. Replacing carbon by hydrogen as the reductant offers a pathway to reduce emissions. However, production of hydrogen using renewable energy will remain a bottlenecks, because making the annual crude steel production of 1.8 billion tons sustainable requires a minimum amount of ~97 million tons of green hydrogen per year. Another fundamental aspect to make ironmaking sector more sustainable lies in an optimal utilization of green hydrogen and energy, thus reducing efforts for costly in-process hydrogen recycling. We therefore demonstrate here how the efficiency in hydrogen and energy consumption during iron ore reduction can be dramatically improved by the knowledge-based combination of two technologies: partially reducing the ore at low temperature via solid-state direct reduction (DR) to a kinetically defined degree, and subsequently melting and completely transforming it to iron under a reducing plasma (i.e. via hydrogen plasma reduction, HPR). Results suggest that an optimal transition point between these two technologies occurs where their efficiency in hydrogen utilization is equal. We found that the reduction of hematite through magnetite into wustite via DR is clean and efficient, but it gets sluggish and inefficient when iron forms at the outermost layers of the iron ore pellets. Conversely, HPR starts violent and unstable with arc delocalization, but proceeds smoothly and efficiently when processing semi-reduced oxides. We performed hybrid reduction experiments by partially reducing hematite pellets via DR at 700°C to 38% global reduction (using a standard thermogravimetry system) and subsequently transferring them to HPR, conducted with a gas mixture of Ar-10%H2 in an arc-melting furnace, to achieve conversion into liquid iron. △ Less

Submitted 31 January, 2022; originally announced January 2022.

Hierarchical nature of hydrogen-based direct reduction of iron oxides

Authors: Yan Ma, Isnaldi R. Souza Filho, Yang Bai, Johannes Schenk, Fabrice Patisson, Arik Beck, Jeroen A. van Bokhoven, Marc G. Willinger, Kejiang Li, Degang Xie, Dirk Ponge, Stefan Zaefferer, Baptiste Gault, Jaber R. Mianroodi, Dierk Raabe

Abstract: Fossil-free ironmaking is indispensable for reducing massive anthropogenic CO2 emissions in the steel industry. Hydrogen-based direct reduction (HyDR) is among the most attractive solutions for green ironmaking, with high technology readiness. The underlying mechanisms governing this process are characterized by a complex interaction of several chemical (phase transformations), physical (transport… ▽ More Fossil-free ironmaking is indispensable for reducing massive anthropogenic CO2 emissions in the steel industry. Hydrogen-based direct reduction (HyDR) is among the most attractive solutions for green ironmaking, with high technology readiness. The underlying mechanisms governing this process are characterized by a complex interaction of several chemical (phase transformations), physical (transport), and mechanical (stresses) phenomena. Their interplay leads to rich microstructures, characterized by a hierarchy of defects ranging across several orders of magnitude in length, including vacancies, dislocations, internal interfaces, and free surfaces in the form of cracks and pores. These defects can all act as reaction, nucleation, and diffusion sites, shaping the overall reduction kinetics. A clear understanding of the roles and interactions of these dynamically-evolving nano-/microstructure features is missing. Gaining better insights in these effects could enable improved access to the microstructure-based design of more efficient HyDR methods, with potentially high impact on the urgently needed decarbonization in the steel industry. △ Less

Submitted 29 January, 2022; originally announced January 2022.

Hydrogen trapping and embrittlement in high-strength Al-alloys

Authors: Huan Zhao, Poulami Chakraborty, Dirk Ponge, Tilmann Hickel, Binhan Sun, Chun-Hung Wu, Baptiste Gault, Dierk Raabe

Abstract: Ever more stringent regulations on greenhouse gas emissions from transportation motivate efforts to revisit materials used for vehicles. High-strength Al-alloys often used in aircrafts could help reduce the weight of automobiles, but are susceptible to environmental degradation. Hydrogen (H) "embrittlement" is often pointed as the main culprit, however, the mechanisms underpinning failure are elus… ▽ More Ever more stringent regulations on greenhouse gas emissions from transportation motivate efforts to revisit materials used for vehicles. High-strength Al-alloys often used in aircrafts could help reduce the weight of automobiles, but are susceptible to environmental degradation. Hydrogen (H) "embrittlement" is often pointed as the main culprit, however, the mechanisms underpinning failure are elusive: atomic-scale analysis of H inside an alloy remains a challenge, and this prevents deploying alloy design strategies to enhance the materials' durability. Here we successfully performed near-atomic scale analysis of H trapped in second-phase particles and at grain boundaries in a high-strength 7xxx Al-alloy. We used these observations to guide atomistic ab-initio calculations which show that the co-segregation of alloying elements and H favours grain boundary decohesion, while the strong partitioning of H into the second-phases removes solute H from the matrix, hence preventing H-embrittlement. Our insights further advance the mechanistic understanding of H-assisted embrittlement in Al-alloys, emphasizing the role of H-traps in retarding cracking and guiding new alloy design. △ Less

Submitted 12 January, 2022; originally announced January 2022.

Chemo-Mechanical Phase-Field Modeling of Iron Oxide Reduction with Hydrogen

Authors: Yang Bai, Jaber Rezaei Mianroodi, Yan Ma, Alisson Kwiatkowski da Silva, Bob Svendsen, Dierk Raabe

Abstract: The reduction of iron ore with carbon-carriers is one of the largest sources of greenhouse gas emissions in the industry, motivating global activities to replace the coke-based blast furnace reduction by hydrogen-based direct reduction (HyDR). Iron oxide reduction with hydrogen has been widely investigated both experimentally and theoretically. The process includes multiple types of chemical react… ▽ More The reduction of iron ore with carbon-carriers is one of the largest sources of greenhouse gas emissions in the industry, motivating global activities to replace the coke-based blast furnace reduction by hydrogen-based direct reduction (HyDR). Iron oxide reduction with hydrogen has been widely investigated both experimentally and theoretically. The process includes multiple types of chemical reactions, solid state and defect-mediated diffusion (by oxygen and hydrogen species), several phase transformations, as well as massive volume shrinkage and mechanical stress buildup. In this work, a chemo-mechanically coupled phase-field (PF) model has been developed to explore the interplay between phase transformation, chemical reaction, species diffusion, large elasto-plastic deformation and microstructure evolution. Energetic constitutive relations of the model are based on the system free energy which is calibrated with the help of a thermodynamic database. The model has been first applied to the classical core-shell (wüstite-iron) structure. Simulations show that the phase transformation from wüstite to alpha-iron can result in high stress and rapidly decelerating reaction kinetics. Mechanical stresses can contribute elastic energy to the system, making phase transformation difficult. Thus slow reaction kinetics and low metallization are observed. However, if the stress becomes comparatively high, it can shift the shape of the free energy from a double-well to a single-well case and speed up the transformation. The model has been further applied to simulate an actual iron oxide specimen with its complex microstructure, characterized by electron microscopy. The simulation results show that isolated pores in the microstructure are filled with water vapor during reduction, an effect which influences the local reaction atmosphere and dynamics. △ Less

Submitted 22 November, 2021; originally announced November 2021.

A Unified Taxonomy and Multimodal Dataset for Events in Invasion Games

Authors: Henrik Biermann, Jonas Theiner, Manuel Bassek, Dominik Raabe, Daniel Memmert, Ralph Ewerth

Abstract: The automatic detection of events in complex sports games like soccer and handball using positional or video data is of large interest in research and industry. One requirement is a fundamental understanding of underlying concepts, i.e., events that occur on the pitch. Previous work often deals only with so-called low-level events based on well-defined rules such as free kicks, free throws, or goa… ▽ More The automatic detection of events in complex sports games like soccer and handball using positional or video data is of large interest in research and industry. One requirement is a fundamental understanding of underlying concepts, i.e., events that occur on the pitch. Previous work often deals only with so-called low-level events based on well-defined rules such as free kicks, free throws, or goals. High-level events, such as passes, are less frequently approached due to a lack of consistent definitions. This introduces a level of ambiguity that necessities careful validation when regarding event annotations. Yet, this validation step is usually neglected as the majority of studies adopt annotations from commercial providers on private datasets of unknown quality and focuses on soccer only. To address these issues, we present (1) a universal taxonomy that covers a wide range of low and high-level events for invasion games and is exemplarily refined to soccer and handball, and (2) release two multi-modal datasets comprising video and positional data with gold-standard annotations to foster research in fine-grained and ball-centered event spotting. Experiments on human performance demonstrate the robustness of the proposed taxonomy, and that disagreements and ambiguities in the annotation increase with the complexity of the event. An I3D model for video classification is adopted for event spotting and reveals the potential for benchmarking. Datasets are available at: https://github.com/mm4spa/eigd △ Less

Submitted 26 August, 2021; v1 submitted 25 August, 2021; originally announced August 2021.

Lossless Multi-Scale Constitutive Elastic Relations with Artificial Intelligence

Authors: Jaber Rezaei Mianroodi, Shahed Rezaei, Nima H. Siboni, Bai-Xiang Xu, Dierk Raabe

Abstract: The elastic properties of materials derive from their electronic and atomic nature. However, simulating bulk materials fully at these scales is not feasible, so that typically homogenized continuum descriptions are used instead. A seamless and lossless transition of the constitutive description of the elastic response of materials between these two scales has been so far elusive. Here we show how… ▽ More The elastic properties of materials derive from their electronic and atomic nature. However, simulating bulk materials fully at these scales is not feasible, so that typically homogenized continuum descriptions are used instead. A seamless and lossless transition of the constitutive description of the elastic response of materials between these two scales has been so far elusive. Here we show how this problem can be overcome by using Artificial Intelligence (AI). A Convolutional Neural Network (CNN) model is trained, by taking the structure image of a nanoporous material as input and the corresponding elasticity tensor, calculated from Molecular Statics (MS), as output. Trained with the atomistic data, the CNN model captures the size- and pore-dependency of the material's elastic properties which, on the physics side, can stem from surfaces and non-local effects. Such effects are often ignored in upscaling from atomistic to classical continuum theory. To demonstrate the accuracy and the efficiency of the trained CNN model, a Finite Element Method (FEM) based result of an elastically deformed nanoporous beam equipped with the CNN as constitutive law is compared with that by a full atomistic simulation. The good agreement between the atomistic simulations and the FEM-AI combination for a system with size and surface effects establishes a new lossless scale bridging approach to such problems. The trained CNN model deviates from the atomistic result by 9.6\% for porosity scenarios of up to 90\% but it is about 230 times faster than the MS calculation and does not require to change simulation methods between different scales. The efficiency of the CNN evaluation together with the preservation of important atomistic effects makes the trained model an effective atomistically-informed constitutive model for macroscopic simulations of nanoporous materials and solving of inverse problems. △ Less

Submitted 5 August, 2021; originally announced August 2021.

Laser-equipped gas reaction chamber for probing environmentally sensitive materials at near atomic scale

Authors: Heena Khanchandani, Ayman A. El-Zoka, Se-Ho Kim, Uwe Tezins, Dirk Vogel, Andreas Sturm, Dierk Raabe, Baptiste Gault, Leigh Stephenson

Abstract: Numerous metallurgical and materials science applications depend on quantitative atomic-scale characterizations of environmentally-sensitive materials and their transient states. Studying the effect upon materials subjected to thermochemical treatments in specific gaseous atmospheres is of central importance for specifically studying a material's resistance to certain oxidative or hydrogen environ… ▽ More Numerous metallurgical and materials science applications depend on quantitative atomic-scale characterizations of environmentally-sensitive materials and their transient states. Studying the effect upon materials subjected to thermochemical treatments in specific gaseous atmospheres is of central importance for specifically studying a material's resistance to certain oxidative or hydrogen environments. It is also important for investigating catalytic materials, direct reduction of an oxide, particular surface science reactions or nanoparticle fabrication routes. This manuscript realizes such experiments upon a thermochemical reaction chamber called the Reacthub and allows for transferring treated materials under cryogenic & ultrahigh vacuum workflow conditions for characterisation by either atom probe or scanning Xe+/electron microscopies. Two examples are discussed in the present study. One protocol was in the deuterium gas charging (25 kPa D2 at 200 °C) of a high-manganese twinning-induced-plasticity steel and characterization of the ingress and trapping of hydrogen at various features (grain boundaries in particular) in efforts to relate this to the steel's hydrogen embrittlement susceptibility. Deuterium was successfully detected after gas charging but most contrast originated from the complex ion FeOD+ signal and the feature may be an artefact. The second example considered the direct deuterium reduction (5 kPa D2 at 700 °C) of a single crystal wuestite sample, demonstrating that under a standard thermochemical treatment causes rapid reduction upon the nanoscale. Further studies are required for complete confidence about these phenomena, but these experiments successfully demonstrate that how an ex-situ thermochemical treatment can be realised that captures environmentally-sensitive transient states that can be analysed by atomic-scale by atom probe microscope. △ Less

Submitted 21 October, 2021; v1 submitted 26 July, 2021; originally announced July 2021.

Discovery and implications of hidden atomic-scale structure in a metallic meteorite

Authors: András Kovács, Laura H. Lewis, Dhanalaksmi Palanisamy, Thibaud Denneulin, Alexander Schwedt, Edward R. D. Scott, Baptiste Gault, Dierk Raabe, Rafal E. Dunin-Borkowski, Michalis Charilaou

Abstract: Iron and its alloys have made modern civilisation possible, with metallic meteorites providing one of the human's earliest sources of usable iron as well as providing a window into our solar system's billion-year history. Here highest-resolution tools reveal the existence of a previously hidden FeNi nanophase within the extremely slowly cooled metallic meteorite NWA 6259. This new nanophase exists… ▽ More Iron and its alloys have made modern civilisation possible, with metallic meteorites providing one of the human's earliest sources of usable iron as well as providing a window into our solar system's billion-year history. Here highest-resolution tools reveal the existence of a previously hidden FeNi nanophase within the extremely slowly cooled metallic meteorite NWA 6259. This new nanophase exists alongside Ni-poor and Ni-rich nanoprecipitates within a matrix of tetrataenite, the uniaxial, chemically ordered form of FeNi. The ferromagnetic nature of the nanoprecipitates combined with the antiferromagnetic character of the FeNi nanophases give rise to a complex magnetic state that evolves dramatically with temperature. These observations extend and possibly alter our understanding of celestial metallurgy, provide new knowledge concerning the archetypal Fe-Ni phase diagram and supply new information for the development of new types of sustainable, technologically critical high-energy magnets. △ Less

Submitted 16 July, 2021; originally announced July 2021.

Comments: 10 pages, 5 figures

Dopant-segregation to grain boundaries controls electrical conductivity of n-type NbCo(Pt)Sn half-Heusler alloy mediating thermoelectric performance

Authors: Ting Luo, Federico Serrano-Sánchez, Hanna Bishara, Siyuan Zhang, Ruben Bueno Villoro, Jimmy Jiahong Kuo, Claudia Felser, Christina Scheu, G. Jeffrey Snyder, James P. Best, Gerhard Dehm, Yuan Yu, Dierk Raabe, Chenguang Fu, Baptiste Gault

Abstract: Science-driven design of future thermoelectric materials requires a deep understanding of the fundamental relationships between microstructure and transport properties. Grain boundaries in polycrystalline materials influence the thermoelectric performance through the scattering of phonons or the trapping of electrons due to space-charge effects. Yet, the current lack of careful investigations on g… ▽ More Science-driven design of future thermoelectric materials requires a deep understanding of the fundamental relationships between microstructure and transport properties. Grain boundaries in polycrystalline materials influence the thermoelectric performance through the scattering of phonons or the trapping of electrons due to space-charge effects. Yet, the current lack of careful investigations on grain boundary-associated features hinders further optimization of properties. Here, we study n-type NbCo1-xPtxSn half-Heusler alloys, which were synthesized by ball milling and spark plasma sintering (SPS). Post-SPS annealing was performed on one sample, leading to improved low-temperature electrical conductivity. The microstructure of both samples was examined by electron microscopy and atom probe tomography. The grain size increases from ~230 nm to ~2.38 μみゅーm upon annealing. Pt is found within grains and at grain boundaries, where it locally reduces the resistivity, as assessed by in situ four-point-probe electrical conductivity measurement. Our work showcases the correlation between microstructure and electrical conductivity, providing opportunities for future microstructural optimization by tuning the chemical composition at grain boundaries. △ Less

Submitted 1 July, 2021; originally announced July 2021.

Revealing in-plane grain boundary composition features through machine learning from atom probe tomography data

Authors: Xuyang Zhou, Ye Wei, Markus Kühbach, Huan Zhao, Florian Vogel, Reza Darvishi Kamachali, Gregory B. Thompson, Dierk Raabe, Baptiste Gault

Abstract: Grain boundaries (GBs) are planar lattice defects that govern the properties of many types of polycrystalline materials. Hence, their structures have been investigated in great detail. However, much less is known about their chemical features, owing to the experimental difficulties to probe these features at the atomic length scale inside bulk material specimens. Atom probe tomography (APT) is a t… ▽ More Grain boundaries (GBs) are planar lattice defects that govern the properties of many types of polycrystalline materials. Hence, their structures have been investigated in great detail. However, much less is known about their chemical features, owing to the experimental difficulties to probe these features at the atomic length scale inside bulk material specimens. Atom probe tomography (APT) is a tool capable of accomplishing this task, with an ability to quantify chemical characteristics at near-atomic scale. Using APT data sets, we present here a machine-learning-based approach for the automated quantification of chemical features of GBs. We trained a convolutional neural network (CNN) using twenty thousand synthesized images of grain interiors, GBs, or triple junctions. Such a trained CNN automatically detects the locations of GBs from APT data. Those GBs are then subjected to compositional mapping and analysis, including revealing their in-plane chemical decoration patterns. We applied this approach to experimentally obtained APT data sets pertaining to three case studies, namely, Ni-P, Pt-Au, and Al-Zn-Mg-Cu alloys. In the first case, we extracted GB-specific segregation features as a function of misorientation and coincidence site lattice character. Secondly, we revealed interfacial excesses and in-plane chemical features that could not have been found by standard compositional analyses. Lastly, we tracked the temporal evolution of chemical decoration from early-stage solute GB segregation in the dilute limit to interfacial phase separation, characterized by the evolution of complex composition patterns. This machine-learning-based approach provides quantitative, unbiased, and automated access to GB chemical analyses, serving as an enabling tool for new discoveries related to interface thermodynamics, kinetics, and the associated chemistry-structure-property relations. △ Less

Submitted 18 June, 2021; originally announced June 2021.

CALPHAD-informed phase-field modeling of grain boundary microchemistry and precipitation in Al-Zn-Mg-Cu alloys

Authors: Chuanlai Liu, Alistair Garner, Huan Zhao, Philip B. Prangnell, Baptiste Gault, Dierk Raabe, Pratheek Shanthraj

Abstract: The grain boundary (GB) microchemistry and precipitation behaviour in high-strength Al-Zn-Mg-Cu alloys has an important influence on their mechanical and electrochemical properties. Simulation of the GB segregation, precipitation, and solute distribution in these alloys requires an accurate description of the thermodynamics and kinetics of this multi-component system. CALPHAD databases have been s… ▽ More The grain boundary (GB) microchemistry and precipitation behaviour in high-strength Al-Zn-Mg-Cu alloys has an important influence on their mechanical and electrochemical properties. Simulation of the GB segregation, precipitation, and solute distribution in these alloys requires an accurate description of the thermodynamics and kinetics of this multi-component system. CALPHAD databases have been successfully developed for equilibrium thermodynamic calculations in complex multi-component systems, and in recent years have been combined with diffusion simulations. In this work, we have directly incorporated a CALPHAD database into a phase-field framework, to simulate, with high fidelity, the complex kinetics of the non-equilibrium GB microstructures that develop in these important commercial alloys during heat treatment. In particular, the influence of GB solute segregation, GB diffusion, precipitate number density, and far-field matrix composition, on the growth of a population of GB precipitates, was systematically investigated in a model Al-Zn-Mg-Cu alloy of near AA7050 composition. The simulation results were compared with scanning transmission electron microscopy and atom probe tomography characterisation of alloys of the similar composition, with good agreement. △ Less

Submitted 12 April, 2021; originally announced April 2021.

Teaching Solid Mechanics to Artificial Intelligence: a fast solver for heterogeneous solids

Authors: Jaber Rezaei Mianroodi, Nima H. Siboni, Dierk Raabe

Abstract: We propose a deep neural network (DNN) as a fast surrogate model for local stress (and in principle strain) calculation in inhomogeneous non-linear material systems. We show that the DNN predicts the local stresses with about 3.8% mean absolute percentage error (MAPE) for the case of heterogeneous elastic media and a mechanical phase contrast of up to factor of 1.5 among neighboring domains, while… ▽ More We propose a deep neural network (DNN) as a fast surrogate model for local stress (and in principle strain) calculation in inhomogeneous non-linear material systems. We show that the DNN predicts the local stresses with about 3.8% mean absolute percentage error (MAPE) for the case of heterogeneous elastic media and a mechanical phase contrast of up to factor of 1.5 among neighboring domains, while performing 103 times faster than spectral solvers. The speed-up arises from the fact that after training, the DNN predicts the stress without any iterations, as opposed to the iterative nature of standard non-linear solvers. The new DNN surrogate model also proves suited for general purposes: it is capable to reproduce the stress distribution in geometries topologically far different from those used for training, implying effective learning of scenarios described by the underlying partial differential equations. Even in the case of elasto-plastic materials with up to 2 times mechanical contrast in elastic stiffness and 4 times in yield stress among adjacent regions, where conventional solvers typically require a substantial number of iterations to arrive at stress predictions, the trained model simulates the micromechanics with a MAPE of 6.4% in one single forward evaluation step of the network, i.e. without any iterative calculations even for the case of such a non-linear problem. The results reveal a completely new and highly efficient approach to solve non-linear mechanical boundary value problems and/or augment existing solution methods in corresponding hybrid variants, with an acceleration up to factor of 8300 for heterogeneous elastic-plastic materials in comparison to the currently fastest available solvers. △ Less

Submitted 16 March, 2021; originally announced March 2021.

Revealing atomic-scale vacancy-solute interaction in nickel

Authors: Felipe F. Morgado, Shyam Katnagallu, Christoph Freysoldt, Benjamin Klaes, François Vurpillot, Jörg Neugebauer, Dierk Raabe, Steffen Neumeier, Baptiste Gault, Leigh T. Stephenson

Abstract: Imaging individual vacancies in solids and revealing their interactions with solute atoms remains one of the frontiers in microscopy and microanalysis. Here we study a creep-deformed binary Ni-2 at.% Ta alloy. Atom probe tomography reveals a random distribution of Ta. Field ion microscopy, with contrast interpretation supported by density-functional theory and time-of-flight mass spectrometry, evi… ▽ More Imaging individual vacancies in solids and revealing their interactions with solute atoms remains one of the frontiers in microscopy and microanalysis. Here we study a creep-deformed binary Ni-2 at.% Ta alloy. Atom probe tomography reveals a random distribution of Ta. Field ion microscopy, with contrast interpretation supported by density-functional theory and time-of-flight mass spectrometry, evidences a positive correlation of tantalum with vacancies. Our results support solute-vacancy binding, which explains improvement in creep resistance of Ta-containing Ni-based superalloys and helps guide future material design strategies. △ Less

Submitted 16 June, 2021; v1 submitted 2 March, 2021; originally announced March 2021.

Comments: Submitted to Physics Review Letter

Influence of microstructure and atomic-scale chemistry on iron ore reduction with hydrogen at 700°C

Authors: Se-Ho Kim, Xue Zhang, Kevin Schweinar, Isnaldi R. Souza Filho, Katja Angerendt, Yan Ma, Dirk Vogel, Leigh T. Stephenson, Ayman A. El-Zoka, Jaber Rezaei Mianroodi, Michael Rohwerder, Baptiste Gault, Dierk Raabe

Abstract: With 1.85 billion tons produced per year, steel is the most important material class in terms of volume and environmental impact. While steel is a sustainability enabler, for instance through lightweight design, magnetic devices, and efficient turbines, its primary production is not. For 3000 years, iron has been reduced from ores using carbon. Today 2.1 tons CO2 are produced per ton of steel, cau… ▽ More With 1.85 billion tons produced per year, steel is the most important material class in terms of volume and environmental impact. While steel is a sustainability enabler, for instance through lightweight design, magnetic devices, and efficient turbines, its primary production is not. For 3000 years, iron has been reduced from ores using carbon. Today 2.1 tons CO2 are produced per ton of steel, causing 30% of the global CO2 emissions in the manufacturing sector, which translates to 6.5% of the global CO2 emissions. These numbers qualify iron- and steel-making as the largest single industrial greenhouse gas emission source. The envisaged future industrial route to mitigate these CO2 emissions targets green hydrogen as a reductant. Although this reaction has been studied for decades, its kinetics is not well understood, particularly during the wustite reduction step which is dramatically slower than the hematite reduction. Many rate-limiting factors of this reaction are set by the micro- and nanostructure as well as the local chemistry of the ores. Their quantification allows knowledge-driven ore preparation and process optimization to make the hydrogen-based reduction of iron ores commercially viable, enabling the required massive CO2 mitigation to ease global warming. Here, we report on a multi-scale structure and composition analysis of iron reduced from hematite with pure H2, reaching down to near-atomic scale. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Magneto-electric Tuning of Pinning-Type Permanent Magnets through Atomic-Scale Engineering of Grain Boundaries

Authors: Xinglong Ye, Fengkai Yan, Lukas Schaefer, Di Wang, Holger Geßwein, Wu Wang, Mohammed Reda Chellali, Leigh T. Stephenson, Konstantin Skokov, Oliver Gutfleisch, Dierk Raabe, Horst Hahn, Baptiste Gault, Robert Kruk

Abstract: Pinning-type magnets maintaining high coercivity, i.e. the ability to sustain magnetization, at high temperature are at the core of thriving clean-energy technologies. Among these, Sm2Co17-based magnets are excellent candidates owing to their high-temperature stability. However, despite decades of efforts to optimize the intragranular microstructure, the coercivity currently only reaches 20~30% of… ▽ More Pinning-type magnets maintaining high coercivity, i.e. the ability to sustain magnetization, at high temperature are at the core of thriving clean-energy technologies. Among these, Sm2Co17-based magnets are excellent candidates owing to their high-temperature stability. However, despite decades of efforts to optimize the intragranular microstructure, the coercivity currently only reaches 20~30% of the theoretical limits. Here, the roles of the grain-interior nanostructure and the grain boundaries in controlling coercivity are disentangled by an emerging magneto-electric approach. Through hydrogen charging/discharging by applying voltages of only ~ 1 V, the coercivity is reversibly tuned by an unprecedented value of ~ 1.3 T. In situ magneto-structural measurements and atomic-scale tracking of hydrogen atoms reveal that the segregation of hydrogen atoms at the grain boundaries, rather than the change of the crystal structure, dominates the reversible and substantial change of coercivity. Hydrogen lowers the local magnetocrystalline anisotropy and facilitates the magnetization reversal starting from the grain boundaries. Our study reveals the previously neglected critical role of grain boundaries in the conventional magnetisation-switching paradigm, suggesting a critical reconsideration of strategies to overcome the coercivity limits in permanent magnets, via for instance atomic-scale grain boundary engineering. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Defect segregation and its effect on the photoelectrochemical properties of Ti-doped hematite photoanodes for solar water splitting

Authors: Barbara Scherrer, Tong Li, Anton Tsyganok, Max Döbeli, Bhavana Gupta, Kirtiman Deo Malviya, Olga Kasian, Nitzan Maman, Baptiste Gault, Daniel A. Grave, Alexander Mehlman, Iris Visoly-Fisher, Dierk Raabe, Avner Rothschild

Abstract: Optimising the photoelectrochemical performance of hematite photoanodes for solar water splitting requires better understanding of the relationships between dopant distribution, structural defects and photoelectrochemical properties. Here, we use complementary characterisation techniques including electron microscopy, conductive atomic force microscopy (CAFM), Rutherford backscattering spectroscop… ▽ More Optimising the photoelectrochemical performance of hematite photoanodes for solar water splitting requires better understanding of the relationships between dopant distribution, structural defects and photoelectrochemical properties. Here, we use complementary characterisation techniques including electron microscopy, conductive atomic force microscopy (CAFM), Rutherford backscattering spectroscopy (RBS), atom probe tomography (APT) and intensity modulated photocurrent spectroscopy (IMPS) to study this correlation in Ti-doped (1 cat.%) hematite films deposited by pulsed laser deposition (PLD) on F:SnO2 (FTO) coated glass substrates. The deposition was carried out at 300 °C, followed by annealing at 500 deg C for 2 h. Upon annealing, Ti was observed by APT to segregate to the hematite/FTO interface and into some hematite grains. Since no other pronounced changes in microstructure and chemical composition were observed by electron microscopy and RBS after annealing, the non-uniform Ti redistribution seems to be the reason for a reduced interfacial recombination in the annealed films, as observed by IMPS. This results in a lower onset potential, higher photocurrent and larger fill factor with respect to the as-deposited state. This work provides atomic-scale insights into the microscopic inhomogeneity in Ti-doped hematite thin films and the role of defect segregation in their electrical and photoelectrochemical properties. △ Less

Submitted 8 December, 2020; originally announced December 2020.

Journal ref: Chemistry of Materials 2020

Machine-learning-enhanced time-of-flight mass spectrometry analysis

Authors: Ye Wei, Rama Srinivas Varanasi, Torsten Schwarz, Leonie Gomell, Huan Zhao, David J. Larson, Binhan Sun, Geng Liu, Hao Chen, Dierk Raabe, Baptiste Gault

Abstract: Mass spectrometry is a widespread approach to work out what are the constituents of a material. Atoms and molecules are removed from the material and collected, and subsequently, a critical step is to infer their correct identities based from patterns formed in their mass-to-charge ratios and relative isotopic abundances. However, this identification step still mainly relies on individual user's e… ▽ More Mass spectrometry is a widespread approach to work out what are the constituents of a material. Atoms and molecules are removed from the material and collected, and subsequently, a critical step is to infer their correct identities based from patterns formed in their mass-to-charge ratios and relative isotopic abundances. However, this identification step still mainly relies on individual user's expertise, making its standardization challenging, and hindering efficient data processing. Here, we introduce an approach that leverages modern machine learning technique to identify peak patterns in time-of-flight mass spectra within microseconds, outperforming human users without loss of accuracy. Our approach is cross-validated on mass spectra generated from different time-of-flight mass spectrometry(ToF-MS) techniques, offering the ToF-MS community an open-source, intelligent mass spectra analysis. △ Less

Submitted 2 October, 2020; originally announced October 2020.

Comments: 20 pages, 15 figures

A cracking oxygen story: a new view of stress corrosion cracking in titanium alloys

Authors: Sudha Joseph, Paraskevas Kontis, Yanhong Chang, Yitong Shi, Dierk Raabe, Baptiste Gault, David Dye

Abstract: Titanium alloys can suffer from halide-associated stress corrosion cracking at elevated temperatures e.g., in jet engines, where chlorides and Ti-oxide promote the cracking of water vapour in the gas stream, depositing embrittling species at the crack tip. Here we report, using isotopically-labelled experiments, that crack tips in an industrial Ti-6Al-2Sn-4Zr-6Mo alloy are strongly enriched (>5 at… ▽ More Titanium alloys can suffer from halide-associated stress corrosion cracking at elevated temperatures e.g., in jet engines, where chlorides and Ti-oxide promote the cracking of water vapour in the gas stream, depositing embrittling species at the crack tip. Here we report, using isotopically-labelled experiments, that crack tips in an industrial Ti-6Al-2Sn-4Zr-6Mo alloy are strongly enriched (>5 at.%) in oxygen from the water vapour, far greater than the amounts (0.25 at.%) required to embrittle the material. Surprisingly, relatively little hydrogen (deuterium) is measured, despite careful preparation and analysis. Therefore, we suggest that a combined effect of O and H leads to cracking, with O playing a vital role, since it is well-known to cause embrittlement of the alloy. In contrast it appears that in alpha+beta Ti alloys, it may be that H may drain away into the bulk owing to its high solubility in beta-Ti, rather than being retained in the stress field of the crack tip. Therefore, whilst hydrides may form on the fracture surface, hydrogen ingress might not be the only plausible mechanism of embrittlement of the underlying matrix. This possibility challenges decades of understanding of stress-corrosion cracking as being related solely to the hydrogen enhanced localised plasticity (HELP) mechanism, which explains why H-doped Ti alloys are embrittled. This would change the perspective on stress corrosion embrittlement away from a focus purely on hydrogen to also consider the ingress of O originating from the water vapour, insights critical for designing corrosion resistant materials. △ Less

Submitted 23 November, 2021; v1 submitted 22 September, 2020; originally announced September 2020.

Algorithm Based on One Monocular Video Delivers Highly Valid and Reliable Gait Parameters

Authors: Dr. Arash Azhand, Dr. Sophie Rabe, Dr. Swantje Müller, Igor Sattler, Dr. Anika Steinert

Abstract: Despite its paramount importance for manifold use cases (e.g., in the health care industry, sports, rehabilitation and fitness assessment), sufficiently valid and reliable gait parameter measurement is still limited to high-tech gait laboratories mostly. Here, we demonstrate the excellent validity and test-retest repeatability of a novel gait assessment system which is built upon modern convolutio… ▽ More Despite its paramount importance for manifold use cases (e.g., in the health care industry, sports, rehabilitation and fitness assessment), sufficiently valid and reliable gait parameter measurement is still limited to high-tech gait laboratories mostly. Here, we demonstrate the excellent validity and test-retest repeatability of a novel gait assessment system which is built upon modern convolutional neural networks to extract three-dimensional skeleton joints from monocular frontal-view videos of walking humans. The validity study is based on a comparison to the GAITRite pressure-sensitive walkway system. All measured gait parameters (gait speed, cadence, step length and step time) showed excellent concurrent validity for multiple walk trials at normal and fast gait speeds. The test-retest-repeatability is on the same level as the GAITRite system. In conclusion, we are convinced that our results can pave the way for cost, space and operationally effective gait analysis in broad mainstream applications. Most sensor-based systems are costly, must be operated by extensively trained personnel (e.g., motion capture systems) or - even if not quite as costly - still possess considerable complexity (e.g., wearable sensors). In contrast, a video sufficient for the assessment method presented here can be obtained by anyone, without much training, via a smartphone camera. △ Less

Submitted 23 June, 2021; v1 submitted 5 August, 2020; originally announced August 2020.

Solute hydrogen and deuterium observed at the near atomic scale in high-strength steel

Authors: Andrew J. Breen, Leigh T. Stephenson, Binhan Sun, Yujiao Li, Olga Kasian, Dierk Raabe, Michael Herbig, Baptiste Gault

Abstract: Observing solute hydrogen (H) in matter is a formidable challenge, yet, enabling quantitative imaging of H at the atomic-scale is critical to understand its deleterious influence on the mechanical strength of many metallic alloys that has resulted in many catastrophic failures of engineering parts and structures. Here, we report on the APT analysis of hydrogen (H) and deuterium (D) within the nano… ▽ More Observing solute hydrogen (H) in matter is a formidable challenge, yet, enabling quantitative imaging of H at the atomic-scale is critical to understand its deleterious influence on the mechanical strength of many metallic alloys that has resulted in many catastrophic failures of engineering parts and structures. Here, we report on the APT analysis of hydrogen (H) and deuterium (D) within the nanostructure of an ultra-high strength steel with high resistance to hydrogen embrittlement. Cold drawn, severely deformed pearlitic steel wires (Fe-0.98C-0.31Mn-0.20Si-0.20Cr-0.01Cu-0.006P-0.007S wt.%, εいぷしろん=3.1) contains cementite decomposed during the pre-deformation of the alloy and ferrite. We find H and D within the decomposed cementite, and at some interfaces with the surrounding ferrite. To ascertain the origin of the H/D signal obtained in APT, we explored a series of experimental workflows including cryogenic specimen preparation and cryogenic-vacuum transfer from the preparation into a state-of-the-art atom probe. Our study points to the critical role of the preparation, i.e. the possible saturation of H-trapping sites during electrochemical polishing, how these can be alleviated by the use of an outgassing treatment, cryogenic preparation and transfer prior to charging. Accommodation of large amounts of H in the under-stoichiometric carbide likely explains the resistance of pearlite against hydrogen embrittlement. △ Less

Submitted 3 August, 2020; originally announced August 2020.

Comparative study of hydrogen embrittlement resistance between additively and conventionally manufactured austenitic stainless steels

Authors: Dong-Hyun Lee, Binhan Sun, Subin Lee, Dirk Ponge, Eric A. Jägle, Dierk Raabe

Abstract: Hydrogen embrittlement in 304L (18wt.% Cr, 8-10wt.% Ni) austenitic stainless steel (ASS) fabricated by laser powder-bed-fusion (LPBF) was investigated by tensile testing after electrochemical hydrogen pre-charging and compared to conventionally available 304L ASSs with two different processing histories, (i) casting plus annealing (CA) and (ii) CA plus thermomechanical treatment (TMT). It was reve… ▽ More Hydrogen embrittlement in 304L (18wt.% Cr, 8-10wt.% Ni) austenitic stainless steel (ASS) fabricated by laser powder-bed-fusion (LPBF) was investigated by tensile testing after electrochemical hydrogen pre-charging and compared to conventionally available 304L ASSs with two different processing histories, (i) casting plus annealing (CA) and (ii) CA plus thermomechanical treatment (TMT). It was revealed that hydrogen-charging led to a significant reduction in ductility for the CA sample, but only a small effect of hydrogen was observed for the LPBF and CA-TMT samples. Hydrogen-assisted cracking behavior was found to be strongly linked to strain-induced martensitic transformation. In addition, the amount of alpha' martensite was much higher in the CA sample than in other samples, suggesting that severe hydrogen embrittlement can be correlated with the low mechanical stability of austenite. Detailed microstructural characterization showed that low austenite stability of the CA sample was mainly attributed to the retained content of delta ferrite and the chemical inhomogeneity inside the gamma matrix (gamma close to delta has ~2 wt.% higher Cr but ~2 wt.% lower Ni), but TMT enhanced the chemical homogeneity and thus austenite stability. By contrast, the LPBF process led directly, i.e. without any thermomechanical treatment, to a fully austenitic structure with homogeneous elemental distribution in the ASS. These results confirmed that the presence of delta and the chemical inhomogeneity inside gamma matrix, which promoted the deformation-induced martensitic transformation and the associated H enrichment at the gamma-alpha' interface, was the primary reason for the severe H-assisted failure. △ Less

Submitted 31 March, 2020; originally announced April 2020.

Comments: 40 pages, 15 Figures

Strain rate dependency of dislocation plasticity

Authors: Haidong Fan, Jaafar A. El-Awady, Qingyuan Wang, Dierk Raabe, Michael Zaiser

Abstract: Dislocation slip is a general deformation mode and governs the strength of metals. Via discrete dislocation dynamics and molecular dynamics simulations, we investigate the strain rate and dislocation density dependence of the strength of bulk copper single crystals using 192 simulations spanning over 10 orders of magnitude in strain rate and 9 orders of magnitude in dislocation density. Based on t… ▽ More Dislocation slip is a general deformation mode and governs the strength of metals. Via discrete dislocation dynamics and molecular dynamics simulations, we investigate the strain rate and dislocation density dependence of the strength of bulk copper single crystals using 192 simulations spanning over 10 orders of magnitude in strain rate and 9 orders of magnitude in dislocation density. Based on these large set of simulations and theoretical analysis, a new analytical relationship between material strength, dislocation density, strain rate and dislocation mobility is proposed, which is in excellent agreement with the current simulations as well as with experimental data. The results show that the material strength is a non-monotonic function of dislocation density and displays two universal regimes (first decreasing, then increasing) as the dislocation density increases. The first regime is a result of strain rate hardening, while the second regime is dominated by the classical Taylor forest hardening. Accordingly, the strength displays universally, as a function of strain rate, a rate-independent regime at low strain rates (governed by forest hardening) followed by a rate hardening regime at high strain rates (governed by strain rate hardening). All the results can be captured by a single scaling function. Finally, the fluctuations of dislocation flow are analyzed in terms of the strain rate dependent distribution of dislocation segment velocities. It is found that the fluctuations are governed by another universal scaling function and diverge in the rate independent limit, indicating a critical behavior. The current analysis provides a comprehensive understanding on how collective dislocation motions are governed by the competition between the internal elastic interactions of dislocations, and the stress required to drive dislocation fluxes at a given externally imposed strain rate. △ Less

Submitted 20 March, 2020; originally announced March 2020.

Comments: 31 pages, 6 figures, 71 conferences

Could face-centered cubic titanium in cold-rolled commercially-pure titanium only be a Ti-hydride?

Authors: Yanhong Chang, Siyuan Zhang, Christian H. Liebscher, David Dye, Dirk Ponge, Christina Scheu, Gerhard Dehm, Dierk Raabe, Baptiste Gault, Wenjun Lu

Abstract: A face-centered cubic (FCC) phase in electro-polished specimens for transmission electron microscopy of commercially pure titanium has sometimes been reported. Here, a combination of atom-probe tomography, scanning transmission electron microscopy and low-loss electron energy loss spectroscopy is employed to study both the crystal structural and chemical composition of this FCC phase. Our results… ▽ More A face-centered cubic (FCC) phase in electro-polished specimens for transmission electron microscopy of commercially pure titanium has sometimes been reported. Here, a combination of atom-probe tomography, scanning transmission electron microscopy and low-loss electron energy loss spectroscopy is employed to study both the crystal structural and chemical composition of this FCC phase. Our results prove that the FCC phase is actually a TiHx (x>1) hydride, and not a new allotrope of Ti, in agreement with previous reports. The formation of the hydride is discussed. △ Less

Submitted 23 October, 2019; v1 submitted 2 July, 2019; originally announced July 2019.

Multi-component chemo-mechanics based on transport relations for the chemical potential

Authors: Pratheek Shanthraj, Chuanlai Liu, Amirhassan Akbarian, Bob Svendsen, Dierk Raabe

Abstract: A chemo-mechanical model for a finite-strain elasto-viscoplastic material containing multiple chemical components is formulated and an efficient numerical implementation is developed to solve the resulting transport relations. The numerical solution relies on inverting the constitutive model for the chemical potential. In this work, a semi-analytical inversion for a general family of multi-compone… ▽ More A chemo-mechanical model for a finite-strain elasto-viscoplastic material containing multiple chemical components is formulated and an efficient numerical implementation is developed to solve the resulting transport relations. The numerical solution relies on inverting the constitutive model for the chemical potential. In this work, a semi-analytical inversion for a general family of multi-component regular-solution chemical free energy models is derived. This is based on splitting the chemical free energy into a convex contribution, treated implicitly, and a non-convex contribution, treated explicitly. This results in a reformulation of the system transport equations in terms of the chemical potential rather than the composition as the independent field variable. The numerical conditioning of the reformulated system, discretised by finite elements, is shown to be significantly improved, and convergence to the Cahn-Hilliard solution is demonstrated for the case of binary spinodal decomposition. Chemo-mechanically coupled binary and ternary spinodal decomposition systems are then investigated to illustrate the effect of anisotropic elastic deformation and plastic relaxation of the resulting spinodal morphologies in more complex material systems. △ Less

Submitted 1 August, 2019; v1 submitted 25 June, 2019; originally announced June 2019.

On the interaction of precipitates and tensile twins in magnesium alloys

Authors: Chuanlai. Liu, Pratheek. Shanthraj, Joseph. Robson, Martin. Diehl, Shuai. Dong, Jie. Dong, Wenjiang. Ding, Dierk. Raabe

Abstract: Although magnesium alloys deform extensively through shear strains and crystallographic re-orientations associated with the growth of twins, little is known about the strengthening mechanisms associated with this deformation mode. A crystal plasticity based phase field model for twinning is employed in this work to study the strengthening mechanisms resulting from the interaction between twin grow… ▽ More Although magnesium alloys deform extensively through shear strains and crystallographic re-orientations associated with the growth of twins, little is known about the strengthening mechanisms associated with this deformation mode. A crystal plasticity based phase field model for twinning is employed in this work to study the strengthening mechanisms resulting from the interaction between twin growth and precipitates. The full-field simulations reveal in great detail the pinning and de-pinning of a twin boundary at individual precipitates, resulting in a maximum resistance to twin growth when the precipitate is partially embedded in the twin. Furthermore, statistically representative precipitate distributions are used to systematically investigate the influence of key microstructural parameters such as precipitate orientation, volume fraction, size, and aspect ratio on the resistance to twin growth. The results indicate that the effective critical resolved shear stress (CRSS) for twin growth increases linearly with precipitate volume fraction and aspect ratio. For a constant volume fraction of precipitates, reduction of the precipitate size below a critical level produces a strong increase in the CRSS due to the Orowan-like strengthening mechanism between the twin interface and precipitates. Above this level the CRSS is size independent. The results are quantitatively and qualitatively comparable with experimental measurements and predictions of mean-field strengthening models. Based on the results, guidelines for the design of high strength magnesium alloys are discussed. △ Less

Submitted 1 August, 2019; v1 submitted 20 June, 2019; originally announced June 2019.

Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys

Authors: Paraskevas Kontis, Edouard Chauvet, Zirong Peng, Junyang He, Alisson Kwiatkowski da Silva, Dierk Raabe, Catherine Tassin, Jean-Jacques Blandin, Stéphane Abed, Rémy Dendievel, Baptiste Gault, Guilhem Martin

Abstract: There are still debates regarding the mechanisms that lead to hot cracking in parts build by additive manufacturing (AM) of non-weldable Ni-based superalloys. This lack of in-depth understanding of the root causes of hot cracking is an impediment to designing engineering parts for safety-critical applications. Here, we deploy a near-atomic-scale approach to investigate the details of the compositi… ▽ More There are still debates regarding the mechanisms that lead to hot cracking in parts build by additive manufacturing (AM) of non-weldable Ni-based superalloys. This lack of in-depth understanding of the root causes of hot cracking is an impediment to designing engineering parts for safety-critical applications. Here, we deploy a near-atomic-scale approach to investigate the details of the compositional decoration of grain boundaries in the coarse-grained, columnar microstructure in parts built from a non-weldable Ni-based superalloy by selective electron-beam melting. The progressive enrichment in Cr, Mo and B at grain boundaries over the course of the AM-typical successive solidification and remelting events, accompanied by solid-state diffusion, causes grain boundary segregation induced liquation. This observation is consistent with thermodynamic calculations. We demonstrate that by adjusting build parameters to obtain a fine-grained equiaxed or a columnar microstructure with grain width smaller than 100 $μみゅー$m enables to avoid cracking, despite strong grain boundary segregation. We find that the spread of critical solutes to a higher total interfacial area, combined with lower thermal stresses, helps to suppress interfacial liquation. △ Less

Submitted 1 August, 2019; v1 submitted 23 May, 2019; originally announced May 2019.

Comments: Accepted version at Acta Materialia

Segregation--Assisted Spinodal and Transient Spinodal Phase Separation at Grain Boundaries

Authors: Reza Darvishi Kamachali, Alisson Kwiatkowski da Silva, Eunan McEniry, Dirk Ponge, Baptiste Gault, Joerg Neugebauer, Dierk Raabe

Abstract: Segregation to grain boundaries affects their cohesion, corrosion and embrittlement and plays a critical role in heterogeneous nucleation. In order to quantitatively study segregation and phase separation at grain boundaries, we derive a density-based phase-field model. In this model, we describe the grain boundary free energy based on available bulk thermodynamic data while an atomic grain bounda… ▽ More Segregation to grain boundaries affects their cohesion, corrosion and embrittlement and plays a critical role in heterogeneous nucleation. In order to quantitatively study segregation and phase separation at grain boundaries, we derive a density-based phase-field model. In this model, we describe the grain boundary free energy based on available bulk thermodynamic data while an atomic grain boundary density is obtained using atomistic simulations. To benchmark the performance of the model, we study Mn grain boundary segregation in the Fe--Mn system. 3D simulation results are compared against atom probe tomography measurements. We show that a continuous increase in the alloy composition results in a discontinuous jump in the Mn grain boundary segregation. This jump corresponds to an interfacial spinodal phase separation. For alloy compositions above the interfacial spinodal, we found a transient spinodal phase separation phenomenon which opens opportunities for knowledge-based microstructure design through the chemical manipulation of grain boundaries. The proposed density-based model provides a powerful tool to study thermodynamics and kinetics of segregation and phase separation at grain boundaries. △ Less

Submitted 14 November, 2019; v1 submitted 20 May, 2019; originally announced May 2019.

Comments: 36 Pages, 8 Figures, Full paper &Supplementary Information, 85 References

Journal ref: npj Comutational Materials (2020) 191

Imaging individual solute atoms at crystalline imperfections in metals

Authors: Shyam Katnagallu, Leigh T. Stephenson, Isabelle Mouton, Christoph Freysoldt, Aparna P. A. Subramanyam, Jan Jenke, Alvin N. Ladines, Steffen Neumeier, Thomas Hammerschmidt, Ralf Drautz, Jörg Neugebauer, François Vurpillot, Dierk Raabe, Baptiste Gault

Abstract: Directly imaging all atoms constituting a material and, maybe more importantly, crystalline defects that dictate materials' properties, remains a formidable challenge. Here, we propose a new approach to chemistry-sensitive field-ion microscopy (FIM) combining contrast interpretation from density-functional theory (DFT) and elemental identification enabled by time-of-flight mass-spectrometry and da… ▽ More Directly imaging all atoms constituting a material and, maybe more importantly, crystalline defects that dictate materials' properties, remains a formidable challenge. Here, we propose a new approach to chemistry-sensitive field-ion microscopy (FIM) combining contrast interpretation from density-functional theory (DFT) and elemental identification enabled by time-of-flight mass-spectrometry and data mining. Analytical-FIM has true atomic resolution and we demonstrate how the technique can reveal the presence of individual solute atoms at specific positions in the microstructure. The performance of this new technique is showcased in revealing individual Re atoms at crystalline defects formed in Ni during creep deformation. The atomistic details offered by A-FIM allowed us to directly compare our results with simulations, and to tackle a long-standing question of how Re extends lifetime of Ni-based superalloys in service at high-temperature. △ Less

Submitted 31 March, 2019; v1 submitted 8 March, 2019; originally announced March 2019.

Unraveling the Metastability of C_n^{2+} (n=2-4) Clusters

Authors: Zirong Peng, David Zanuttini, Benoit Gervais, Emmanuelle Jacquet, Ivan Blum, Pyuck-Pa Choi, Dierk Raabe, Francois Vurpillot, Baptiste Gault

Abstract: Pure carbon clusters have received considerable attention for a long time. However, fundamental questions such as what the smallest stable carbon cluster dication is remain unclear. Here, we investigated the stability and fragmentation behavior of C_n^{2+} (n=2-4) dications using state-of-the-art atom probe tomography. These small doubly charged carbon cluster ions were produced by laser-pulsed fi… ▽ More Pure carbon clusters have received considerable attention for a long time. However, fundamental questions such as what the smallest stable carbon cluster dication is remain unclear. Here, we investigated the stability and fragmentation behavior of C_n^{2+} (n=2-4) dications using state-of-the-art atom probe tomography. These small doubly charged carbon cluster ions were produced by laser-pulsed field evaporation from a tungsten carbide field emitter. Correlation analysis of the fragments detected in coincidence reveals that they only decay to C_{n-1}^+ + C^+. During C_2^{2+} => C^+ + C^+, significant kinetic energy release (\approx 5.75-7.8 eV) is evidenced. Through advanced experimental data processing combined with \textit{ab initio} calculations and simulations, we show that the field evaporated diatomic ^12C_2^{2+} dications are either in a weakly bound ^3Πぱい_u and ^3Σしぐま_g^- state, quickly dissociating under the intense electric field, or in a deeply bound electronic ^5Σしぐま_u^- state with lifetimes longer than 180 ps. △ Less

Submitted 3 February, 2019; originally announced February 2019.

Journal ref: J. Phys. Chem. Lett., 2019, 10, pp 581--588

Influence of composition and precipitation evolution on damage at grain boundaries in a crept polycrystalline Ni-based superalloy

Authors: Paraskevas Kontis, Aleksander Kostka, Dierk Raabe, Baptiste Gault

Abstract: The microstructural and compositional evolution of intergranular carbides and borides prior to and after creep deformation at 850 $^\circ$C in a polycrystalline nickel-based superalloy was studied. Primary MC carbides, enveloped within intergranular $\rm γがんま'$ layers, decomposed resulting in the formation of layers of the undesirable $\rm ηいーた$ phase. These layers have a composition corresponding to Ni… ▽ More The microstructural and compositional evolution of intergranular carbides and borides prior to and after creep deformation at 850 $^\circ$C in a polycrystalline nickel-based superalloy was studied. Primary MC carbides, enveloped within intergranular $\rm γがんま'$ layers, decomposed resulting in the formation of layers of the undesirable $\rm ηいーた$ phase. These layers have a composition corresponding to Ni$_{3}$Ta as measured by atom probe tomography and their structure is consistent with the D0$_{24}$ hexagonal structure as revealed by transmission electron microscopy. Electron backscattered diffraction reveals that they assume various misorientations with regard to the adjacent grains. As a consequence, these layers act as brittle recrystallized zones and crack initiation sites. The composition of the MC carbides after creep was altered substantially, with the Ta content decreasing and the Hf and Zr contents increasing, suggesting a beneficial effect of Hf and Zr additions on the stability of MC carbides. By contrast, $\rm M_{5}B_3$ borides were found to be microstructurally stable after creep and without substantial compositional changes. Borides at 850 $^\circ$C were found to coarsen, resulting in some cases into $\rm γがんま'$-depleted zones, where, however, no cracks were observed. The major consequences of secondary phases on the microstructural stability of superalloys during the design of new polycrystalline superalloys are discussed. △ Less

Submitted 7 January, 2019; originally announced January 2019.

Comments: 28 pages, 12 Figures,

Atomic-scale investigation of hydrogen distribution in a Ti-Mo alloy

Authors: Fengkai Yan, Isabelle Mouton, Leigh T. Stephenson, Andrew J. Breen, Yanhong Chang, Dirk Ponge, Dierk Raabe, Baptiste Gault

Abstract: Ingress of hydrogen is often linked to catastrophic failure of Ti-alloys. Here, we quantify the hydrogen distribution in fully \b{eta} and αあるふぁ+\b{eta} Ti-Mo alloys by using atom probe tomography. Hydrogen does not segregate at grain boundaries in the fully \b{eta} sample but segregates at some αあるふぁ/\b{eta} phase boundaries with a composition exceeding 20 at.% in the αあるふぁ+\b{eta} sample. No stable hydrides… ▽ More Ingress of hydrogen is often linked to catastrophic failure of Ti-alloys. Here, we quantify the hydrogen distribution in fully \b{eta} and αあるふぁ+\b{eta} Ti-Mo alloys by using atom probe tomography. Hydrogen does not segregate at grain boundaries in the fully \b{eta} sample but segregates at some αあるふぁ/\b{eta} phase boundaries with a composition exceeding 20 at.% in the αあるふぁ+\b{eta} sample. No stable hydrides were observed in either sample. The hydrogen concentration in \b{eta} phases linearly decreases from ~13 at. % to ~4 at. % with increasing Mo-content, which is ascribed to the suppression of hydrogen uptake by Mo addition. △ Less

Submitted 3 December, 2018; originally announced December 2018.