-
Systems design, assembly, integration and lab testing of WALOP-South Polarimeter
Authors:
Siddharth Maharana,
A. N. Ramaprakash,
Chaitanya Rajarshi,
Pravin Khodade,
Bhushan Joshi,
Pravin Chordia,
Abhay Kohok,
Ramya M. Anche,
Deepa Modi,
John A. Kypriotakis,
Amit Deokar,
Aditya Kinjawadekar,
Stephen B. Potter,
Dmitry Blinov,
Hans Kristian Eriksen,
Myrto Falalaki,
Hitesh Gajjar,
Tuhin Ghosh,
Eirik Gjerløw,
Sebastain Kiehlmann,
Ioannis Liodakis,
Nikolaos Mandarakas,
Georgia V. Panopoulou,
Vasiliki Pavlidou,
Timothy J. Pearson
, et al. (6 additional authors not shown)
Abstract:
Wide-Area Linear Optical Polarimeter (WALOP)-South is the first wide-field and survey-capacity polarimeter in the optical wavelengths. On schedule for commissioning in 2024, it will be mounted on the 1 m SAAO telescope in Sutherland Observatory, South Africa to undertake the PASIPHAE sky survey. PASIPHAE program will create the first polarimetric sky map in the optical wavelengths, spanning more t…
▽ More
Wide-Area Linear Optical Polarimeter (WALOP)-South is the first wide-field and survey-capacity polarimeter in the optical wavelengths. On schedule for commissioning in 2024, it will be mounted on the 1 m SAAO telescope in Sutherland Observatory, South Africa to undertake the PASIPHAE sky survey. PASIPHAE program will create the first polarimetric sky map in the optical wavelengths, spanning more than 2000 square degrees of the southern Galactic region. The innovative design of WALOP-South will enable it to measure the linear polarization (Stokes parameters $q$ and $u$), in a single exposure, of all sources in a field of view (FoV) of $35\times35$ arcminutes-squared in the SDSS-r broadband and narrowband filters between 500-750 nm with 0.1 % polarization accuracy.
The unique goals of the instrument place very stringent systems engineering goals, including on the performance of the optical, polarimetric, optomechanical, and electronic subsystems. All the subsystems have been designed carefully to meet the overall instrument performance goals.
As of May 2024, all the instrument optical and mechanical subsystems have been assembled and are currently getting tested and integrated. The complete testing and characterization of the instrument in the lab is expected to be completed by August 2024.
In this paper, we will present (a) the design and development of the entire instrument and its major subsystems, focusing on the opto-mechanical design which has not been reported before, and (b) assembly and integration of the instrument in the lab and early results from lab characterization of the instrument.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
The first degree-scale starlight-polarization-based tomography map of the magnetized interstellar medium
Authors:
V. Pelgrims,
N. Mandarakas,
R. Skalidis,
K. Tassis,
G. V. Panopoulou,
V. Pavlidou,
D. Blinov,
S. Kiehlmann,
S. E. Clark,
B. S. Hensley,
S. Romanopoulos,
A. Basyrov,
H. K. Eriksen,
M. Falalaki,
T. Ghosh,
E. Gjerløw,
J. A. Kypriotakis,
S. Maharana,
A. Papadaki,
T. J. Pearson,
S. B. Potter,
A. N. Ramaprakash,
A. C. S. Readhead,
I. K. Wehus
Abstract:
We present the first degree-scale tomography map of the dusty magnetized interstellar medium (ISM) from stellar polarimetry and distance measurements. We used the RoboPol polarimeter at Skinakas Observatory to conduct a survey of starlight polarization in a region of the sky of 4 square degrees. We propose a Bayesian method to decompose the stellar-polarization source field along the distance to i…
▽ More
We present the first degree-scale tomography map of the dusty magnetized interstellar medium (ISM) from stellar polarimetry and distance measurements. We used the RoboPol polarimeter at Skinakas Observatory to conduct a survey of starlight polarization in a region of the sky of 4 square degrees. We propose a Bayesian method to decompose the stellar-polarization source field along the distance to invert the 3D volume occupied by the observed stars. We used it to obtain the first 3D map of the dusty magnetized ISM. Specifically, we produced a tomography map of the orientation of the plane-of-sky (POS) component of the magnetic field threading the diffuse, dusty regions responsible for the stellar polarization. For the targeted region centered on Galactic coordinates $(l,b) \approx (103.3^\circ, 22.3^\circ)$, we identified several ISM clouds. Most of the lines of sight intersect more than one cloud. A very nearby component was detected in the foreground of a dominant component from which most of the polarization signal comes. Farther clouds, with a distance of up to 2~kpc, were similarly detected. Some of them likely correspond to intermediate-velocity clouds seen in HI spectra in this region of the sky. We found that the orientation of the POS component of the magnetic field changes along distance for most of the lines of sight. Our study demonstrates that starlight polarization data coupled to distance measures have the power to reveal the great complexity of the dusty magnetized ISM in 3D and, in particular, to provide local measurements of the POS component of the magnetic field. This demonstrates that the inversion of large data volumes, as expected from the PASIPHAE survey, will provide the necessary means to move forward in the modeling of the Galactic magnetic field and of the dusty magnetized ISM as a contaminant in observations of the cosmic microwave background polarization.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
Spectropolarimeter on a 2--4 m class telescope and proposed science cases
Authors:
Archana Soam,
Siddharth Maharana,
B-G Andersson,
A. N. Ramaprakash
Abstract:
We propose a spectropolarimeter a covering wavelength range of 3200--7000 Å [3200Å chosen as lower limit to go to the atmospheric cut-off. It's ``needed" for some Serkowski curves and would make the instrument even more unique] for a 2-4~m class telescope. In this article, we discuss the science cases which will be covered with this proposed instrument. The technical requirements and analysis plan…
▽ More
We propose a spectropolarimeter a covering wavelength range of 3200--7000 Å [3200Å chosen as lower limit to go to the atmospheric cut-off. It's ``needed" for some Serkowski curves and would make the instrument even more unique] for a 2-4~m class telescope. In this article, we discuss the science cases which will be covered with this proposed instrument. The technical requirements and analysis plan for each science case is also discussed. This spectropolarimeter targeting exciting galactic and extra-galactic research, will be unique instrument on a 2-4~m facilities.
△ Less
Submitted 21 May, 2024; v1 submitted 29 February, 2024;
originally announced February 2024.
-
Large Projects in Astronomy: An Indian Endeavour
Authors:
Yogesh Wadadekar,
Shriharsh Tendulkar,
Sanjit Mitra,
Eswar Reddy,
A. N. Ramaprakash,
Timo Prusti,
Juna Kollmeier,
Pranav Sharma,
Ashish Mahabal
Abstract:
Policy Brief on "Large Projects in Astronomy: An Indian Endeavour", distilled from the corresponding panel that was part of the discussions during S20 Policy Webinar on Astroinformatics for Sustainable Development held on 6-7 July 2023.
Cutting-edge astronomy initiatives often entail substantial investment and require a high level of expertise. Even the most technologically advanced nations rec…
▽ More
Policy Brief on "Large Projects in Astronomy: An Indian Endeavour", distilled from the corresponding panel that was part of the discussions during S20 Policy Webinar on Astroinformatics for Sustainable Development held on 6-7 July 2023.
Cutting-edge astronomy initiatives often entail substantial investment and require a high level of expertise. Even the most technologically advanced nations recognize the value of establishing international partnerships to secure both financial resources and talent for these ambitious endeavours as they hold immense promise for catalysing transformative scientific discoveries, driving technological innovation, provide training opportunities for the next generation of scientists and engineers, and expanding our understanding of the cosmos that surrounds us. Crucially, large-scale multilateral collaborations serve as powerful agents for promoting unity and peace among the global population. Participants from various nations share a vested interest in the success of these projects and the wealth of knowledge they yield, fostering a sense of common purpose and shared goals. By utilizing astroinformatics capabilities, these initiatives are not merely enhancing our comprehension of the universe but are also actively contributing to the attainment of sustainable development objectives. In this discussion, we delve into the challenges faced, and prospects for substantial astronomical undertakings. Additionally, we present recommendations aimed at guaranteeing their effectiveness and optimizing their influence on both scientific advancement and society.
The policy webinar took place during the G20 presidency in India (2023). A summary based on the seven panels can be found here: arxiv:2401.04623.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
AstroInformatics: Recommendations for Global Cooperation
Authors:
Ashish Mahabal,
Pranav Sharma,
Rana Adhikari,
Mark Allen,
Stefano Andreon,
Varun Bhalerao,
Federica Bianco,
Anthony Brown,
S. Bradley Cenko,
Paula Coehlo,
Jeffery Cooke,
Daniel Crichton,
Chenzhou Cui,
Reinaldo de Carvalho,
Richard Doyle,
Laurent Eyer,
Bernard Fanaroff,
Christopher Fluke,
Francisco Forster,
Kevin Govender,
Matthew J. Graham,
Renée Hložek,
Puji Irawati,
Ajit Kembhavi,
Juna Kollmeier
, et al. (23 additional authors not shown)
Abstract:
Policy Brief on "AstroInformatics, Recommendations for Global Collaboration", distilled from panel discussions during S20 Policy Webinar on Astroinformatics for Sustainable Development held on 6-7 July 2023.
The deliberations encompassed a wide array of topics, including broad astroinformatics, sky surveys, large-scale international initiatives, global data repositories, space-related data, regi…
▽ More
Policy Brief on "AstroInformatics, Recommendations for Global Collaboration", distilled from panel discussions during S20 Policy Webinar on Astroinformatics for Sustainable Development held on 6-7 July 2023.
The deliberations encompassed a wide array of topics, including broad astroinformatics, sky surveys, large-scale international initiatives, global data repositories, space-related data, regional and international collaborative efforts, as well as workforce development within the field. These discussions comprehensively addressed the current status, notable achievements, and the manifold challenges that the field of astroinformatics currently confronts.
The G20 nations present a unique opportunity due to their abundant human and technological capabilities, coupled with their widespread geographical representation. Leveraging these strengths, significant strides can be made in various domains. These include, but are not limited to, the advancement of STEM education and workforce development, the promotion of equitable resource utilization, and contributions to fields such as Earth Science and Climate Science.
We present a concise overview, followed by specific recommendations that pertain to both ground-based and space data initiatives. Our team remains readily available to furnish further elaboration on any of these proposals as required. Furthermore, we anticipate further engagement during the upcoming G20 presidencies in Brazil (2024) and South Africa (2025) to ensure the continued discussion and realization of these objectives.
The policy webinar took place during the G20 presidency in India (2023). Notes based on the seven panels will be separately published.
△ Less
Submitted 9 January, 2024;
originally announced January 2024.
-
The RoboPol sample of optical polarimetric standards
Authors:
D. Blinov,
S. Maharana,
F. Bouzelou,
C. Casadio,
E. Gjerløw,
J. Jormanainen,
S. Kiehlmann,
J. A. Kypriotakis,
I. Liodakis,
N. Mandarakas,
L. Markopoulioti,
G. V. Panopoulou,
V. Pelgrims,
A. Pouliasi,
S. Romanopoulos,
R. Skalidis,
R. M. Anche,
E. Angelakis,
J. Antoniadis,
B. J. Medhi,
T. Hovatta,
A. Kus,
N. Kylafis,
A. Mahabal,
I. Myserlis
, et al. (12 additional authors not shown)
Abstract:
Optical polarimeters are typically calibrated using measurements of stars with known and stable polarization parameters. However, there is a lack of such stars available across the sky. Many of the currently available standards are not suitable for medium and large telescopes due to their high brightness. Moreover, as we find, some of the used polarimetric standards are in fact variable or have po…
▽ More
Optical polarimeters are typically calibrated using measurements of stars with known and stable polarization parameters. However, there is a lack of such stars available across the sky. Many of the currently available standards are not suitable for medium and large telescopes due to their high brightness. Moreover, as we find, some of the used polarimetric standards are in fact variable or have polarization parameters that differ from their cataloged values. Our goal is to establish a sample of stable standards suitable for calibrating linear optical polarimeters with an accuracy down to $10^{-3}$ in fractional polarization. For five years, we have been running a monitoring campaign of a sample of standard candidates comprised of 107 stars distributed across the northern sky. We analyzed the variability of the linear polarization of these stars, taking into account the non-Gaussian nature of fractional polarization measurements. For a subsample of nine stars, we also performed multiband polarization measurements. We created a new catalog of 65 stars (see Table 2) that are stable, have small uncertainties of measured polarimetric parameters, and can be used as calibrators of polarimeters at medium- and large-size telescopes.
△ Less
Submitted 12 July, 2023;
originally announced July 2023.
-
Bright-Moon Sky as a Wide-Field Linear Polarimetric Flat Source for Calibration
Authors:
S. Maharana,
S. Kiehlmann,
D. Blinov,
V. Pelgrims,
V. Pavlidou,
K. Tassis,
J. A. Kypriotakis,
A. N. Ramaprakash,
R. M. Anche,
A. Basyrov,
K. Deka,
H. K. Eriksen,
T. Ghosh,
E. Gjerløw,
N. Mandarakas,
E. Ntormousi,
G. V. Panopoulou,
A. Papadaki,
T. Pearson,
S. B. Potter,
A. C. S. Readhead,
R. Skalidis,
I. K. Wehus
Abstract:
Next-generation wide-field optical polarimeters like the Wide-Area Linear Optical Polarimeters (WALOPs) have a field of view (FoV) of tens of arcminutes. For efficient and accurate calibration of these instruments, wide-field polarimetric flat sources will be essential. Currently, no established wide-field polarimetric standard or flat sources exist. This paper tests the feasibility of using the p…
▽ More
Next-generation wide-field optical polarimeters like the Wide-Area Linear Optical Polarimeters (WALOPs) have a field of view (FoV) of tens of arcminutes. For efficient and accurate calibration of these instruments, wide-field polarimetric flat sources will be essential. Currently, no established wide-field polarimetric standard or flat sources exist. This paper tests the feasibility of using the polarized sky patches of the size of around ten-by-ten arcminutes, at a distance of up to 20 degrees from the Moon, on bright-Moon nights as a wide-field linear polarimetric flat source. We observed 19 patches of the sky adjacent to the bright-Moon with the RoboPol instrument in the SDSS-r broadband filter. These were observed on five nights within two days of the full-Moon across two RoboPol observing seasons. We find that for 18 of the 19 patches, the uniformity in the measured normalized Stokes parameters $q$ and $u$ is within 0.2 %, with 12 patches exhibiting uniformity within 0.07 % or better for both $q$ and $u$ simultaneously, making them reliable and stable wide-field linear polarization flats. We demonstrate that the sky on bright-Moon nights is an excellent wide-field linear polarization flat source. Various combinations of the normalized Stokes parameters $q$ and $u$ can be obtained by choosing suitable locations of the sky patch with respect to the Moon
△ Less
Submitted 7 May, 2023;
originally announced May 2023.
-
The Aditya-L1 mission of ISRO
Authors:
Durgesh Tripathi,
D. Chakrabarty,
A. Nandi,
B. Raghvendra Prasad,
A. N. Ramaprakash,
Nigar Shaji,
K. Sankarasubramanian,
R. Satheesh Thampi,
V. K. Yadav
Abstract:
The Aditya-L1 is the first space-based solar observatory of the Indian Space Research Organization (ISRO). The spacecraft will carry seven payloads providing uninterrupted observations of the Sun from the first Lagrangian point. Aditya-L1 comprises four remote sensing instruments, {\it viz.} a coronagraph observing in visible and infrared, a full disk imager in Near Ultra-Violet (NUV), and two ful…
▽ More
The Aditya-L1 is the first space-based solar observatory of the Indian Space Research Organization (ISRO). The spacecraft will carry seven payloads providing uninterrupted observations of the Sun from the first Lagrangian point. Aditya-L1 comprises four remote sensing instruments, {\it viz.} a coronagraph observing in visible and infrared, a full disk imager in Near Ultra-Violet (NUV), and two full-sun integrated spectrometers in soft X-ray and hard X-ray. In addition, there are three instruments for in-situ measurements, including a magnetometer, to study the magnetic field variations during energetic events. Aditya-L1 is truly a mission for multi-messenger solar astronomy from space that will provide comprehensive observations of the Sun across the electromagnetic spectrum and in-situ measurements in a broad range of energy, including magnetic field measurements at L1.
△ Less
Submitted 30 December, 2022; v1 submitted 26 December, 2022;
originally announced December 2022.
-
WALOP-South: A Four-Camera One-Shot Imaging Polarimeter for PASIPHAE Survey. Paper II -- Polarimetric Modelling and Calibration
Authors:
Siddharth Maharana,
Ramya M. Anche,
A. N. Ramaprakash,
Bhushan Joshi,
Artem Basyrov,
Dmitry Blinov,
Carolina Casadio,
Kishan Deka,
Hans Kristian Eriksen,
Tuhin Ghosh,
Eirik Gjerløw,
John A. Kypriotakis,
Sebastian Kiehlmann,
Nikolaos Mandarakas,
Georgia V. Panopoulou,
Katerina Papadaki,
Vasiliki Pavlidou,
Timothy J. Pearson,
Vincent Pelgrims,
Stephen B. Potter,
Anthony C. S. Readhead,
Raphael Skalidis,
Trygve Leithe Svalheim,
Konstantinos Tassis,
Ingunn K. Wehus
Abstract:
The Wide-Area Linear Optical Polarimeter (WALOP)-South instrument is an upcoming wide-field and high-accuracy optical polarimeter to be used as a survey instrument for carrying out the Polar-Areas Stellar Imaging in Polarization High Accuracy Experiment (PASIPHAE) program. Designed to operate as a one-shot four-channel and four-camera imaging polarimeter, it will have a field of view of…
▽ More
The Wide-Area Linear Optical Polarimeter (WALOP)-South instrument is an upcoming wide-field and high-accuracy optical polarimeter to be used as a survey instrument for carrying out the Polar-Areas Stellar Imaging in Polarization High Accuracy Experiment (PASIPHAE) program. Designed to operate as a one-shot four-channel and four-camera imaging polarimeter, it will have a field of view of $35\times 35$ arcminutes and will measure the Stokes parameters $I$, $q$, and $u$ in a single exposure in the SDSS-r broadband filter. The design goal for the instrument is to achieve an overall polarimetric measurement accuracy of 0.1 % over the entire field of view. We present here the complete polarimetric modeling of the instrument, characterizing the amount and sources of instrumental polarization. To accurately retrieve the real Stokes parameters of a source from the measured values, we have developed a calibration method for the instrument. Using this calibration method and simulated data, we demonstrate how to correct instrumental polarization and obtain 0.1 % accuracy in the degree of polarization, $p$. Additionally, we tested and validated the calibration method by implementing it on a table-top WALOP-like test-bed polarimeter in the laboratory.
△ Less
Submitted 26 August, 2022;
originally announced August 2022.
-
Gaussian phase autocorrelation as an accurate compensator for FFT-based atmospheric phase screen simulations
Authors:
Sorabh Chhabra,
Jyotirmay Paul,
A. N. Ramaprakash,
Avinash Surendran
Abstract:
Accurately simulating the atmospheric turbulence behaviour is always challenging. The well-known FFT based method falls short in correctly predicting both the low and high frequency behaviours. Sub-harmonic compensation aids in low-frequency correction but does not solve the problem for all screen size to outer scale parameter ratios (G/$L_0$). FFT-based simulation gives accurate result only for r…
▽ More
Accurately simulating the atmospheric turbulence behaviour is always challenging. The well-known FFT based method falls short in correctly predicting both the low and high frequency behaviours. Sub-harmonic compensation aids in low-frequency correction but does not solve the problem for all screen size to outer scale parameter ratios (G/$L_0$). FFT-based simulation gives accurate result only for relatively large screen size to outer scale parameter ratio (G/$L_0$). In this work, we have introduced a Gaussian phase autocorrelation matrix to compensate for any sort of residual errors after applying for a modified subharmonics compensation. With this, we have solved problems such as under sampling at the high-frequency range, unequal sampling/weights for subharmonics addition at low-frequency range and the patch normalization factor. Our approach reduces the maximum error in phase structure-function in the simulation with respect to theoretical prediction to within 1.8\%, G/$L_0$ = 1/1000.
△ Less
Submitted 11 August, 2022;
originally announced August 2022.
-
Starlight-polarization-based tomography of the magnetized interstellar medium: PASIPHAE's line-of-sight inversion method
Authors:
V. Pelgrims,
G. V. Panopoulou,
K. Tassis,
V. Pavlidou,
A. Basyrov,
D. Blinov,
E. Gjerløw,
S. Kiehlmann,
N. Mandarakas,
A. Papadaki,
R. Skalidis,
A. Tsouros,
R. M. Anche,
H. K. Eriksen,
T. Ghosh,
J. A. Kypriotakis,
S. Maharana,
E. Ntormousi,
T. J. Pearson,
S. B. Potter,
A. N. Ramaprakash,
A. C. S. Readhead,
I. K. Wehus
Abstract:
We present the first Bayesian method for tomographic decomposition of the plane-of-sky orientation of the magnetic field with the use of stellar polarimetry and distance. This standalone tomographic inversion method presents an important step forward in reconstructing the magnetized interstellar medium (ISM) in 3D within dusty regions. We develop a model in which the polarization signal from the m…
▽ More
We present the first Bayesian method for tomographic decomposition of the plane-of-sky orientation of the magnetic field with the use of stellar polarimetry and distance. This standalone tomographic inversion method presents an important step forward in reconstructing the magnetized interstellar medium (ISM) in 3D within dusty regions. We develop a model in which the polarization signal from the magnetized and dusty ISM is described by thin layers at various distances. Our modeling makes it possible to infer the mean polarization (amplitude and orientation) induced by individual dusty clouds and to account for the turbulence-induced scatter in a generic way. We present a likelihood function that explicitly accounts for uncertainties in polarization and parallax. We develop a framework for reconstructing the magnetized ISM through the maximization of the log-likelihood using a nested sampling method. We test our Bayesian inversion method on mock data taking into account realistic uncertainties from Gaia and as expected for the optical polarization survey PASIPHAE according to the currently planned observing strategy. We demonstrate that our method is effective at recovering the cloud properties as soon as the polarization induced by a cloud to its background stars is higher than $\sim 0.1\%$ for the adopted survey exposure time and level of systematic uncertainty. Our method makes it possible to recover not only the mean polarization properties but also to characterize the intrinsic scatter, thus creating new ways to characterize ISM turbulence and the magnetic field strength. Finally, we apply our method to an existing data set of starlight polarization with known line-of-sight decomposition, demonstrating agreement with previous results and an improved quantification of uncertainties in cloud properties.
△ Less
Submitted 28 February, 2023; v1 submitted 3 August, 2022;
originally announced August 2022.
-
The Solar Ultraviolet Imaging Telescope onboard Aditya-L1
Authors:
Durgesh Tripathi,
A. N. Ramaprakash,
Aafaque Khan,
Avyarthana Ghosh,
Subhamoy Chatterjee,
Dipankar Banerjee,
Pravin Chordia,
Achim Gandorfer,
Natalie Krivova,
Dibyendu Nandy,
Chaitanya Rajarshi,
Sami K. Solanki
Abstract:
The Solar Ultraviolet Imaging Telescope (SUIT) is an instrument onboard the Aditya-L1 mission of ISRO that will measure and monitor the solar radiation emitted in the near-ultraviolet wavelength range (200-400 nm). SUIT will simultaneously map the photosphere and the chromosphere of the Sun using 11 filters sensitive to different wavelengths and covering different heights in the solar atmosphere a…
▽ More
The Solar Ultraviolet Imaging Telescope (SUIT) is an instrument onboard the Aditya-L1 mission of ISRO that will measure and monitor the solar radiation emitted in the near-ultraviolet wavelength range (200-400 nm). SUIT will simultaneously map the photosphere and the chromosphere of the Sun using 11 filters sensitive to different wavelengths and covering different heights in the solar atmosphere and help us understand the processes involved in the transfer of mass and energy from one layer to the other. SUIT will also allow us to measure and monitor spatially resolved solar spectral irradiance that governs the chemistry of oxygen and ozone in the stratosphere of Earth's atmosphere. This is central to our understanding of the Sun climate relationship.
△ Less
Submitted 16 April, 2022;
originally announced April 2022.
-
A generalized approach to compensate for low and high frequency errors in FFT based phase screen simulations
Authors:
Sorabh Chhabra,
Jyotirmay Paul,
Anamparambu N. Ramaprakash,
Avinash Surendran
Abstract:
Fast Fourier Transform based phase screen simulations give accurate results only when the screen size ($G$) is much larger than the outer scale parameter ($L_0$). Otherwise, they fall short in correctly predicting both the low and high frequency behaviours of turbulence induced phase distortions. Sub-harmonic compensation is a commonly used technique that aids in low-frequency correction but does…
▽ More
Fast Fourier Transform based phase screen simulations give accurate results only when the screen size ($G$) is much larger than the outer scale parameter ($L_0$). Otherwise, they fall short in correctly predicting both the low and high frequency behaviours of turbulence induced phase distortions. Sub-harmonic compensation is a commonly used technique that aids in low-frequency correction but does not solve the problem for all values of screen size to outer scale parameter ratios $(G/L_0$). A subharmonics based approach will lead to unequal sampling or weights calculation for subharmonics addition at the low-frequency range and patch normalization factor. We have modified the subharmonics based approach by introducing a Gaussian phase autocorrelation matrix that compensates for these shortfalls. We show that the maximum relative error in structure function with respect to theoretical value is as small as 0.5-3% for $(G/L_0$) ratio of 1/1000 even for screen sizes up to 100 m diameter.
△ Less
Submitted 2 June, 2021;
originally announced June 2021.
-
WALOP-South: A wide-field one-shot linear optical polarimeter for PASIPHAE survey
Authors:
Siddharth Maharana,
John A. Kypriotakis,
A. N. Ramaprakash,
Pravin Khodade,
Chaitanya Rajarshi,
Bhushan S. Joshi,
Pravin Chordia,
Ramya M. Anche,
Shrish Mishra,
Dmitry Blinov,
Hans Kristian Eriksen,
Tuhin Ghosh,
Eirik Gjerløw,
Nikolaos Mandarakas,
Georgia V. Panopoulou,
Vasiliki Pavlidou,
Timothy J. Pearson,
Vincent Pelgrims,
Stephen B. Potter,
Anthony C. S. Readhead,
Raphail Skalidis,
Konstantinos Tassis,
Ingunn K. Wehus
Abstract:
WALOP (Wide-Area Linear Optical Polarimeter)-South, to be mounted on the 1m SAAO telescope in South Africa, is first of the two WALOP instruments currently under development for carrying out the PASIPHAE survey. Scheduled for commissioning in the year 2021, the WALOP instruments will be used to measure the linear polarization of around $10^{6}$ stars in the SDSS-r broadband with $0.1~\%$ polarimet…
▽ More
WALOP (Wide-Area Linear Optical Polarimeter)-South, to be mounted on the 1m SAAO telescope in South Africa, is first of the two WALOP instruments currently under development for carrying out the PASIPHAE survey. Scheduled for commissioning in the year 2021, the WALOP instruments will be used to measure the linear polarization of around $10^{6}$ stars in the SDSS-r broadband with $0.1~\%$ polarimetric accuracy, covering 4000 square degrees in the Galactic polar regions. The combined capabilities of one-shot linear polarimetry, high polarimetric accuracy ($< 0.1~\%$) and polarimetric sensitivity ($< 0.05~\%$), and a large field of view (FOV) of $35\times35~arcminutes$ make WALOP-South a unique astronomical instrument. In a single exposure, it is designed to measure the Stokes parameters $I$, $q$ and $u$ in the SDSS-r broadband and narrowband filters between $500-700~nm$. During each measurement, four images of the full field corresponding to the polarization angles of $0^{\circ}$, $45^{\circ}$, $90^{\circ}$ and $135^{\circ}$ will be imaged on four detectors and carrying out differential photometry on these images will yield the Stokes parameters. Major challenges in designing WALOP-South instrument include- (a) in the optical design, correcting for the spectral dispersion introduced by large split angle Wollaston Prisms used as polarization analyzers as well as aberrations from the wide field, and (b) making an optomechanical design adherent to the tolerances required to obtain good imaging and polarimetric performance under all temperature conditions as well as telescope pointing positions. We present the optical and optomechanical design for WALOP-South which overcomes these challenges.
△ Less
Submitted 18 February, 2021;
originally announced February 2021.
-
WALOP-South: A Four Camera One Shot Imaging Polarimeter for PASIPHAE Survey. Paper I -- Optical Design
Authors:
Siddharth Maharana,
John A. Kypriotakis,
A. N. Ramaprakash,
Chaitanya Rajarshi,
Ramya M. Anche,
Shrish,
Dmitry Blinov,
Hans Kristian Eriksen,
Tuhin Ghosh,
Eirik Gjerløw,
Nikolaos Mandarakas,
Georgia V. Panopoulou,
Vasiliki Pavlidou,
Timothy J. Pearson,
Vincent Pelgrims,
Stephen B. Potter,
Anthony C. S. Readhead,
Raphael Skalidis,
Konstantinos Tassis,
Ingunn K. Wehus
Abstract:
The WALOP-South instrument will be mounted on the 1 m SAAO telescope in South Africa as part of the PASIPHAE program to carry out a linear imaging polarization survey of the Galactic polar regions in the optical band. Designed to achieve polarimetric sensitivity of $0.05~\%$ across a $35\times35$ arcminute field of view, it will be capable of measuring the Stokes parameters I, q and u in a single…
▽ More
The WALOP-South instrument will be mounted on the 1 m SAAO telescope in South Africa as part of the PASIPHAE program to carry out a linear imaging polarization survey of the Galactic polar regions in the optical band. Designed to achieve polarimetric sensitivity of $0.05~\%$ across a $35\times35$ arcminute field of view, it will be capable of measuring the Stokes parameters I, q and u in a single exposure in the SDSS-r broadband and narrowband filters between $0.5~μm - 0.7~μm$. For each measurement, four images of the full field corresponding to linear polarization angles of 0 deg, 45 deg, 90 deg and 135 deg in the instrument coordinate system will be created on four detectors from which the Stokes parameters can be found using differential photometry. In designing the optical system, major challenges included correcting for the dispersion introduced by large split angle Wollaston Prisms used as analysers as well as other aberrations from the entire field to obtain imaging quality PSF at the detector. We present the optical design of the WALOP-South instrument which overcomes these challenges and delivers near seeing limited PSFs for the entire field of view.
△ Less
Submitted 18 February, 2021;
originally announced February 2021.
-
RoboPol: AGN polarimetric monitoring data
Authors:
D. Blinov,
S. Kiehlmann,
V. Pavlidou,
G. V. Panopoulou,
R. Skalidis,
E. Angelakis,
C. Casadio,
E. N. Einoder,
T. Hovatta,
K. Kokolakis,
A. Kougentakis,
A. Kus,
N. Kylafis,
E. Kyritsis,
A. Lalakos,
I. Liodakis,
S. Maharana,
E. Makrydopoulou,
N. Mandarakas,
G. M. Maragkakis,
I. Myserlis,
I. Papadakis,
G. Paterakis,
T. J. Pearson,
A. N. Ramaprakash
, et al. (7 additional authors not shown)
Abstract:
We present uniformly reprocessed and re-calibrated data from the RoboPol programme of optopolarimetric monitoring of active galactic nuclei (AGN), covering observations between 2013, when the instrument was commissioned, and 2017. In total, the dataset presented in this paper includes 5068 observations of 222 AGN with Dec > -25 deg. We describe the current version of the RoboPol pipeline that was…
▽ More
We present uniformly reprocessed and re-calibrated data from the RoboPol programme of optopolarimetric monitoring of active galactic nuclei (AGN), covering observations between 2013, when the instrument was commissioned, and 2017. In total, the dataset presented in this paper includes 5068 observations of 222 AGN with Dec > -25 deg. We describe the current version of the RoboPol pipeline that was used to process and calibrate the entire dataset, and we make the data publicly available for use by the astronomical community. Average quantities summarising optopolarimetric behaviour (average degree of polarization, polarization variability index) are also provided for each source we have observed and for the time interval we have followed it.
△ Less
Submitted 30 November, 2020;
originally announced December 2020.
-
Eliminating artefacts in Polarimetric Images using Deep Learning
Authors:
Dhruv Paranjpye,
Ashish Mahabal,
A. N. Ramaprakash,
Gina Panopoulou,
Kieran Cleary,
Anthony Readhead,
Dmitry Blinov,
Kostas Tassis
Abstract:
Polarization measurements done using Imaging Polarimeters such as the Robotic Polarimeter are very sensitive to the presence of artefacts in images. Artefacts can range from internal reflections in a telescope to satellite trails that could contaminate an area of interest in the image. With the advent of wide-field polarimetry surveys, it is imperative to develop methods that automatically flag ar…
▽ More
Polarization measurements done using Imaging Polarimeters such as the Robotic Polarimeter are very sensitive to the presence of artefacts in images. Artefacts can range from internal reflections in a telescope to satellite trails that could contaminate an area of interest in the image. With the advent of wide-field polarimetry surveys, it is imperative to develop methods that automatically flag artefacts in images. In this paper, we implement a Convolutional Neural Network to identify the most dominant artefacts in the images. We find that our model can successfully classify sources with 98\% true positive and 97\% true negative rates. Such models, combined with transfer learning, will give us a running start in artefact elimination for near-future surveys like WALOP.
△ Less
Submitted 19 November, 2019;
originally announced November 2019.
-
RoboPol: A four-channel optical imaging polarimeter
Authors:
A. N. Ramaprakash,
C. V. Rajarshi,
H. K. Das,
P. Khodade,
D. Modi,
G. Panopoulou,
S. Maharana,
D. Blinov,
E. Angelakis,
C. Casadio,
L. Fuhrmann,
T. Hovatta,
S. Kiehlmann,
O. G. King,
N. Kylafis,
A. Kougentakis,
A. Kus,
A. Mahabal,
A. Marecki,
I. Myserlis,
G. Paterakis,
E. Paleologou,
I. Liodakis,
I. Papadakis,
I. Papamastorakis
, et al. (8 additional authors not shown)
Abstract:
We present the design and performance of RoboPol, a four-channel optical polarimeter operating at the Skinakas Observatory in Crete, Greece. RoboPol is capable of measuring both relative linear Stokes parameters $q$ and $u$ (and the total intensity $I$) in one sky exposure. Though primarily used to measure the polarization of point sources in the R-band, the instrument features additional filters…
▽ More
We present the design and performance of RoboPol, a four-channel optical polarimeter operating at the Skinakas Observatory in Crete, Greece. RoboPol is capable of measuring both relative linear Stokes parameters $q$ and $u$ (and the total intensity $I$) in one sky exposure. Though primarily used to measure the polarization of point sources in the R-band, the instrument features additional filters (B, V and I), enabling multi-wavelength imaging polarimetry over a large field of view (13.6' $\times$ 13.6'). We demonstrate the accuracy and stability of the instrument throughout its five years of operation. Best performance is achieved within the central region of the field of view and in the R band. For such measurements the systematic uncertainty is below 0.1% in fractional linear polarization, $p$ (0.05% maximum likelihood). Throughout all observing seasons the instrumental polarization varies within 0.1% in $p$ and within 1$^\circ$ in polarization angle.
△ Less
Submitted 22 February, 2019;
originally announced February 2019.
-
Optical spectroscopic and polarization properties of 2011 outburst of the recurrent nova T Pyxidis
Authors:
M. Pavana,
Ramya M Anche,
G. C. Anupama,
A. N. Ramaprakash,
G. Selvakumar
Abstract:
We study the spectroscopic and ionized structural evolution of T Pyx during its 2011 outburst, and also study the variation in degree of polarization during its early phase. Optical spectroscopic data of this system obtained from day 1.28--2415.62 since discovery, and optical, broadband imaging polarimetric observations obtained from day 1.36--29.33 during the early phases of the outburst are used…
▽ More
We study the spectroscopic and ionized structural evolution of T Pyx during its 2011 outburst, and also study the variation in degree of polarization during its early phase. Optical spectroscopic data of this system obtained from day 1.28--2415.62 since discovery, and optical, broadband imaging polarimetric observations obtained from day 1.36--29.33 during the early phases of the outburst are used in the study. The physical conditions and the geometry of the ionized structure of the nova ejecta has been modelled for a few epochs using the photo-ionization code, CLOUDY in 1D and pyCloudy in 3D. The spectral evolution of the nova ejecta during its 2011 outburst is similar to that of the previous outbursts. The variation in the line profiles is seen very clearly in the early stages due to good coverage during this period. The line profiles vary from P-Cygni (narrower, deeper and sharper) to emission profiles which are broader and structured, which later become narrower and sharper in the late post-outburst phase. The average ejected mass is estimated to be $7.03\, \times\, 10^{-6}\, M_{\odot}$. The ionized structure of the ejecta is found to be a bipolar conical structure with equatorial rings, with a low inclination angle of $14.75^\circ\, \pm\, 0.65^\circ$.
△ Less
Submitted 2 January, 2019;
originally announced January 2019.
-
PASIPHAE: A high-Galactic-latitude, high-accuracy optopolarimetric survey
Authors:
Konstantinos Tassis,
Anamparambu N. Ramaprakash,
Anthony C. S. Readhead,
Stephen B. Potter,
Ingunn K. Wehus,
Georgia V. Panopoulou,
Dmitry Blinov,
Hans Kristian Eriksen,
Brandon Hensley,
Ata Karakci,
John A. Kypriotakis,
Siddharth Maharana,
Evangelia Ntormousi,
Vasiliki Pavlidou,
Timothy J. Pearson,
Raphael Skalidis
Abstract:
PASIPHAE (the Polar-Areas Stellar Imaging in Polarization High-Accuracy Experiment) is an optopolarimetric survey aiming to measure the linear polarization from millions of stars, and use these to create a three-dimensional tomographic map of the magnetic field threading dust clouds within the Milky Way. This map will provide invaluable information for future CMB B-mode experiments searching for i…
▽ More
PASIPHAE (the Polar-Areas Stellar Imaging in Polarization High-Accuracy Experiment) is an optopolarimetric survey aiming to measure the linear polarization from millions of stars, and use these to create a three-dimensional tomographic map of the magnetic field threading dust clouds within the Milky Way. This map will provide invaluable information for future CMB B-mode experiments searching for inflationary gravitational waves, providing unique information regarding line-of-sight integration effects. Optical polarization observations of a large number of stars at known distances, tracing the same dust that emits polarized microwaves, can map the magnetic field between them. The Gaia mission is measuring distances to a billion stars, providing an opportunity to produce a tomographic map of Galactic magnetic field directions, using optical polarization of starlight. Such a map will not only boost CMB polarization foreground removal, but it will also have a profound impact in a wide range of astrophysical research, including interstellar medium physics, high-energy astrophysics, and evolution of the Galaxy. Taking advantage of the novel technology implemented in our high-accuracy Wide-Area Linear Optical Polarimeters (WALOPs) currently under construction at IUCAA, India, we will engage in a large-scale optopolarimetric program that can meet this challenge: a survey of both northern and southern Galactic polar regions targeted by CMB experiments, covering over 10,000 square degrees, which will measure linear optical polarization of over 360 stars per square degree (over 3.5 million stars, a 1000-fold increase over the state of the art). The survey will be conducted concurrently from the South African Astronomical Observatory in Sutherland, South Africa in the southern hemisphere, and the Skinakas Observatory in Crete, Greece, in the north.
△ Less
Submitted 12 October, 2018;
originally announced October 2018.
-
DOTIFS: fore-optics and calibration unit design
Authors:
Haeun Chung,
A. N. Ramaprakash,
Pravin Khodade,
Chaitanya V. Rajarshi,
Sabyasachi Chattopadhyay,
Pravin A. Chordia,
Amitesh Omar,
Changbom Park
Abstract:
We present fore-optics and calibration unit design of Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS). DOTIFS fore-optics is designed to modify the focal ratio of the light and to match its plate scale to the physical size of Integral Field Units (IFUs). The fore-optics also delivers a telecentric beam to the IFUs on the telescope focal plane. There is a calibration unit part of w…
▽ More
We present fore-optics and calibration unit design of Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS). DOTIFS fore-optics is designed to modify the focal ratio of the light and to match its plate scale to the physical size of Integral Field Units (IFUs). The fore-optics also delivers a telecentric beam to the IFUs on the telescope focal plane. There is a calibration unit part of which is combined with the fore-optics to have a light and compact system. We use Xenon-arc lamp as a continuum source and Krypton/Mercury-Neon lamps as wavelength calibration sources. Fore-optics and calibration unit shares two optical lenses to maintain compactness of the overall subsystem. Here we present optical and opto-mechanical design of the calibration unit and fore-optics as well as calibration scheme of DOTIFS.
△ Less
Submitted 8 October, 2018;
originally announced October 2018.
-
DOTIFS: spectrograph optical and opto-mechanical design
Authors:
Haeun Chung,
A. N. Ramaprakash,
Pravin Khodade,
Deepa Modi,
Chaitanya V. Rajarshi,
Sabyasachi Chattopadhyay,
Pravin A. Chordia,
Vishal Joshi,
Sungwook E. Hong,
Amitesh Omar,
Swara Ravindranath,
Yong-Sun Park,
Changbom Park
Abstract:
Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS) is a new multi-Integral Field Unit (IFU) instrument, planned to be mounted on the 3.6m Devasthal optical telescope in Nainital, India. It has eight identical, fiber-fed spectrographs to disperse light coming from 16 IFUs. The spectrographs produce 2,304 spectra over a 370-740nm wavelength range simultaneously with a spectral resoluti…
▽ More
Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS) is a new multi-Integral Field Unit (IFU) instrument, planned to be mounted on the 3.6m Devasthal optical telescope in Nainital, India. It has eight identical, fiber-fed spectrographs to disperse light coming from 16 IFUs. The spectrographs produce 2,304 spectra over a 370-740nm wavelength range simultaneously with a spectral resolution of R=1200-2400. It is composed of all-refractive, all spherical optics designed to achieve on average 26.0% throughput from the telescope to the CCD with the help of high transmission spectrograph optics, volume phase holographic grating, and graded coated e2v 2K by 4K CCD. We present the optical and opto-mechanical design of the spectrograph as well as current development status. Optics and optomechanical components for the spectrographs are being fabricated.
△ Less
Submitted 8 October, 2018;
originally announced October 2018.
-
DOTIFS: a new multi-IFU optical spectrograph for the 3.6-m Devasthal optical telescope
Authors:
Haeun Chung,
A. N. Ramaprakash,
Amitesh Omar,
Swara Ravindranath,
Sabyasachi Chattopadhyay,
Chaitanya V. Rajarshi,
Pravin Khodade
Abstract:
Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS) is a new multi-object Integral Field Spectrograph (IFS) being designed and fabricated by the Inter-University Center for Astronomy and Astrophysics (IUCAA), Pune, India, for the Cassegrain side port of the 3.6m Devasthal Optical Telescope, (DOT) being constructed by the Aryabhatta Research Institute of Observational Sciences (ARIES),…
▽ More
Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS) is a new multi-object Integral Field Spectrograph (IFS) being designed and fabricated by the Inter-University Center for Astronomy and Astrophysics (IUCAA), Pune, India, for the Cassegrain side port of the 3.6m Devasthal Optical Telescope, (DOT) being constructed by the Aryabhatta Research Institute of Observational Sciences (ARIES), Nainital. It is mainly designed to study the physics and kinematics of the ionized gas, star formation and H II regions in the nearby galaxies. It is a novel instrument in terms of multi-IFU, built in deployment system, and high throughput. It consists of one magnifier, 16 integral field units (IFUs), and 8 spectrographs. Each IFU is comprised of a microlens array and optical fibers and has 7.4'' x 8.7'' field of view with 144 spaxel elements, each sampling 0.8'' hexagonal aperture. The IFUs can be distributed on the telescope side port over an 8' diameter focal plane by the deployment system. Optical fibers deliver light from the IFUs to the spectrographs. Eight identical, all refractive, dedicated spectrographs will produce 2,304 R~1800 spectra over 370-740nm wavelength range with a single exposure. Volume Phase Holographic gratings are chosen to make smaller optics and get high throughput. The total throughput of the instrument including the telescope is predicted as 27.5% on average. Observing techniques, data simulator and reduction software are also under development. Currently, conceptual and baseline design review has been done. Some of the components have already been procured. The instrument is expected to see its first light in 2016.
△ Less
Submitted 8 October, 2018;
originally announced October 2018.
-
Noise Characterization of IUCAA Digital Sampling Array Controller (IDSAC)
Authors:
Sabyasachi Chattopadhyay,
A. N. Ramaprakash,
Bhushan Joshi,
Pravin A. Chordia,
Mahesh P. Burse,
Kalpesh Chillal,
Sakya Sinha,
Sujit Punnadi,
Ketan Rikame,
Sungwook E. Hong,
Dhruv Paranjpye,
Haeun Chung,
Changbom Park,
Amitesh Omar
Abstract:
IUCAA Digital Sampling Array Controller (IDSAC) is a flexible and generic yet powerful CCD controller which can handle a wide range of scientific detectors. Based on an easily scalable modular backplane architecture consisting of Single Board Controllers (SBC), IDSAC can control large detector arrays and mosaics. Each of the SBCs offers the full functionality required to control a CCD independentl…
▽ More
IUCAA Digital Sampling Array Controller (IDSAC) is a flexible and generic yet powerful CCD controller which can handle a wide range of scientific detectors. Based on an easily scalable modular backplane architecture consisting of Single Board Controllers (SBC), IDSAC can control large detector arrays and mosaics. Each of the SBCs offers the full functionality required to control a CCD independently. The SBCs can be cold swapped without the need to reconfigure them. Each SBC can handle data from up to four video channels with or without dummy outputs at speeds up to 500 kilo Pixels Per Second (kPPS) Per Channel with a resolution of 16 bits. Communication with Linux based host computer is through a USB3.0 interface, with the option of using copper or optical fibers. A Field Programmable Gate Array (FPGA) is used as the master controller in each SBC which allows great flexibility in optimizing performance by adjusting gain, timing signals, bias levels, etc. using user-editable configuration files without altering the circuit topology. Elimination of thermal kTC noise is achieved via Digital Correlated Double Sampling (DCDS). We present the results of noise performance characterization of IDSAC through simulation, theoretical modeling, and actual measurements. The contribution of different types of noise sources is modeled using a tool to predict noise of a generic DCDS signal chain analytically. The analytical model predicts the net input referenced noise of the signal chain to be 5 electrons for 200k pixels per second per channel readout rate with 3 samples per pixel. Using a cryogenic test set up in the lab, the noise is measured to be 5.4 e (24.3 \muV), for the same readout configuration.
△ Less
Submitted 3 October, 2018;
originally announced October 2018.
-
Multiple rooks of chess - a generic integral field unit deployment technique
Authors:
Sabyasachi Chattopadhyay,
A. N. Ramaprakash,
Pravin Khodade,
Kabir Chakrabarty,
Shabbir Shaikh,
Haeun Chung,
Sungwook E. Hong
Abstract:
A new field re-configuration technique, Multiple Rooks of Chess (MRC), for multiple deployable Integral Field Spectrographs has been developed. The method involves mechanical geometry as well as an optimized deployment algorithm. The geometry is found to be simple for mechanical implementation. The algorithm initially assigns the IFUs to the target objects and then devises the movement sequence ba…
▽ More
A new field re-configuration technique, Multiple Rooks of Chess (MRC), for multiple deployable Integral Field Spectrographs has been developed. The method involves mechanical geometry as well as an optimized deployment algorithm. The geometry is found to be simple for mechanical implementation. The algorithm initially assigns the IFUs to the target objects and then devises the movement sequence based on the current and the desired IFU positions. The reconfiguration time using the suitable actuators which runs at 20 cm/s is found to be a maximum of 25 seconds for the circular DOTIFS focal plane (180 mm diameter). The Geometry Algorithm Combination (GAC) has been tested on several million mock target configurations with object-to-IFU (τ ) ratio varying from 0.25 to 16. The MRC method is found to-be efficient in target acquisition in terms of field revisit and deployment time without any collision or entanglement of the fiber bundles. The efficiency of the technique does not get affected by the increase in number density of target objects. The technique is compared with other available methods based on sky coverage, flexibility and overhead time. The proposed geometry and algorithm combination is found to have an advantage in all of the aspects.
△ Less
Submitted 2 October, 2018;
originally announced October 2018.
-
Demonstration of magnetic field tomography with starlight polarization towards a diffuse sightline of the ISM
Authors:
Georgia V. Panopoulou,
Konstantinos Tassis,
Raphael Skalidis,
Dmitriy Blinov,
Ioannis Liodakis,
Vasiliki Pavlidou,
Stephen B. Potter,
Anamparambu N. Ramaprakash,
Anthony C. S. Readhead,
Ingunn K. Wehus
Abstract:
The availability of large datasets with stellar distance and polarization information will enable a tomographic reconstruction of the (plane-of-the-sky-projected) interstellar magnetic field in the near future. We demonstrate the feasibility of such a decomposition within a small region of the diffuse ISM. We combine measurements of starlight (R-band) linear polarization obtained using the RoboPol…
▽ More
The availability of large datasets with stellar distance and polarization information will enable a tomographic reconstruction of the (plane-of-the-sky-projected) interstellar magnetic field in the near future. We demonstrate the feasibility of such a decomposition within a small region of the diffuse ISM. We combine measurements of starlight (R-band) linear polarization obtained using the RoboPol polarimeter with stellar distances from the second Gaia data release. The stellar sample is brighter than 17 mag in the R band and reaches out to several kpc from the Sun. HI emission spectra reveal the existence of two distinct clouds along the line of sight. We decompose the line-of-sight-integrated stellar polarizations to obtain the mean polarization properties of the two clouds. The two clouds exhibit significant differences in terms of column density and polarization properties. Their mean plane-of-the-sky magnetic field orientation differs by 60 degrees. We show how our tomographic decomposition can be used to constrain our estimates of the polarizing efficiency of the clouds as well as the frequency dependence of the polarization angle of polarized dust emission. We also demonstrate a new method to constrain cloud distances based on this decomposition. Our results represent a preview of the wealth of information that can be obtained from a tomographic map of the ISM magnetic field.
△ Less
Submitted 11 February, 2019; v1 submitted 26 September, 2018;
originally announced September 2018.
-
A new photolithography based technique to mass produce microlens+fibre based integralfield units (IFUs) for 2D spectroscopy
Authors:
Sabyasachi Chattopadhyay,
Vishal Joshi,
A. N. Ramaprakash,
Deepa Modi,
Abhay Kohak,
Haeun Chung
Abstract:
We present a novel photolithography based technique to efficiently fabricate microlens-fibre based Integral Field Units (IFUs). These IFUs are being developed for Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS) which offer sixteen deployable IFUs. In each IFU, a 12 x 12 microlens array is matched with a similar array of fibres to better than +/- 5 micron accuracy for each microlen…
▽ More
We present a novel photolithography based technique to efficiently fabricate microlens-fibre based Integral Field Units (IFUs). These IFUs are being developed for Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS) which offer sixteen deployable IFUs. In each IFU, a 12 x 12 microlens array is matched with a similar array of fibres to better than +/- 5 micron accuracy for each microlens-fibre pair in the array. A mask created on copper foils using photolithography, transfer the pupil spot pattern of each microlens array to a fibre array holder. The approach can be used for mass production of IFUs in an extremely efficient and cost-effective manner.
△ Less
Submitted 17 July, 2018;
originally announced July 2018.
-
IDSAC - IUCAA Digital Sampler Array Controller
Authors:
Sabyasachi Chattopadhyay,
Pravin Chordia,
A. N. Ramaprakash,
Mahesh P. Burse,
Bhushan Joshi,
Kalpesh Chillal
Abstract:
IUCAA Digital Sampling Array Controller (IDSAC) is a generic CCD Controller which is flexible and powerful enough to control a wide variety of CCDs and CMOS detectors used for ground-based astronomy. It has a fully scalable architecture, which can control multiple CCDs and can be easily expanded. The controller has a modular backplane architecture consists of Single Board Controller Cards (SBCs) a…
▽ More
IUCAA Digital Sampling Array Controller (IDSAC) is a generic CCD Controller which is flexible and powerful enough to control a wide variety of CCDs and CMOS detectors used for ground-based astronomy. It has a fully scalable architecture, which can control multiple CCDs and can be easily expanded. The controller has a modular backplane architecture consists of Single Board Controller Cards (SBCs) and can control a mosaic or independent of 5 CCDs. Key features of IDSAC contains usage of FPGA as a reconfigurable master controller, implementation of Digital CDS to achieve low noise and ability to process upto four CCD output at 1Mpixels/Sec/Channel with 16-bit resolution. The best feature of IDSAC is it uses the technique of Digital Correlated Double Sampling(DCDS). It is known that CCD video output is dominated by thermal KTC noise contributed from the summing well capacitor of the CCD output circuitry. To eliminate thermal KTC noise Correlated Double Sampling (CDS) is a very standard technique. CDS performed in Digital domain (DCDS) has several advantages over its analog counterpart, such as - less electronics, faster readout and easier post processing. It is also flexible with sampling rate and pixel throughput while maintaining the core circuit topology intact. The noise characterization of the IDSAC CDS signal chain has been performed by analytical modelling, software simulation and practical measurements. Various types of noise such as white, pink, power supply, bias etc. has been considered while creating a analytical noise model tool to predict noise of a controller system like IDSAC. Standard test bench softwares like Pspice and Multisim are used to simulate the noise performance while several tests are performed to measure the actual noise of IDSAC.The theoretical calculation matches very well with component level simulation as well as practical measurements within 10% accuracy.
△ Less
Submitted 15 July, 2018;
originally announced July 2018.
-
Scalable Platform for Adaptive optics Real-time Control (SPARC) Part 2: Field Programmable Gate Array (FPGA) implementation and performance
Authors:
Avinash Surendran,
Mahesh P. Burse,
A. N. Ramaprakash,
Padmakar S. Parihar
Abstract:
The next generation of Adaptive Optics (AO) systems on large telescopes will require immense computation performance and memory bandwidth, both of which are challenging with the technology available today. The objective of this work is to create a future-proof adaptive optics platform on an FPGA architecture, which scales with the number of subapertures, pixels per subaperture and external memory.…
▽ More
The next generation of Adaptive Optics (AO) systems on large telescopes will require immense computation performance and memory bandwidth, both of which are challenging with the technology available today. The objective of this work is to create a future-proof adaptive optics platform on an FPGA architecture, which scales with the number of subapertures, pixels per subaperture and external memory. We have created a scalable adaptive optics platform with an off-the-shelf FPGA development board, which provides an AO reconstruction time only limited by the external memory bandwidth. SPARC uses the same logic resources irrespective of the number of subapertures in the AO system. This paper is aimed at embedded developers who are interested in the FPGA design and the accompanying hardware interfaces. The central theme of this paper is to show how scalability is incorporated at different levels of the FPGA implementation. This work is a continuation of Part 1 of the paper which explains the concept, objectives, control scheme and method of validation used for testing the platform.
△ Less
Submitted 2 July, 2018;
originally announced July 2018.
-
Scalable Platform for Adaptive optics Real-time Control (SPARC) Part 1: Concept, Architecture and Validation
Authors:
Avinash Surendran,
Mahesh P. Burse,
A. N. Ramaprakash,
Jyotirmay Paul,
Hillol K. Das,
Padmakar S. Parihar
Abstract:
We demonstrate a novel architecture for Adaptive Optics (AO) control based on FPGAs (Field Programmable Gate Arrays), making active use of their configurable parallel processing capability. SPARC's unique capabilities are demonstrated through an implementation on an off-the-shelf inexpensive Xilinx VC-709 development board. The architecture makes SPARC a generic and powerful Real-time Control (RTC…
▽ More
We demonstrate a novel architecture for Adaptive Optics (AO) control based on FPGAs (Field Programmable Gate Arrays), making active use of their configurable parallel processing capability. SPARC's unique capabilities are demonstrated through an implementation on an off-the-shelf inexpensive Xilinx VC-709 development board. The architecture makes SPARC a generic and powerful Real-time Control (RTC) kernel for a broad spectrum of AO scenarios. SPARC is scalable across different numbers of subapertures and pixels per subaperture. The overall concept, objectives, architecture, validation and results from simulation as well as hardware tests are presented here. For Shack-Hartmann wavefront sensors, the total AO reconstruction time ranges from a median of 39.4us (11x11 subapertures) to 1.283 ms (50x50 subapertures) on the development board. For large wavefront sensors, the latency is dominated by access time (~1 ms) of the standard DDR memory available on the board. This paper is divided into two parts. Part 1 is targeted at astronomers interested in the capability of the current hardware. Part 2 explains the FPGA implementation of the wavefront processing unit, the reconstruction algorithm and the hardware interfaces of the platform. Part 2 mainly targets the embedded developers interested in the hardware implementation of SPARC.
△ Less
Submitted 8 June, 2018;
originally announced June 2018.
-
CIRCE: The Canarias InfraRed Camera Experiment for the Gran Telescopio Canarias
Authors:
Stephen S. Eikenberry,
Miguel Charcos,
Michelle L. Edwards,
Alan Garner,
Nestor Lasso-Cabrera,
Richard D. Stelter,
Antonio Marin-Franch,
S. Nicholas Raines,
Kendall Ackley,
John G. Bennett,
Javier A. Cenarro,
Brian Chinn,
H. Veronica Donoso,
Raymond Frommeyer,
Kevin Hanna,
Michael D. Herlevich,
Jeff Julian,
Paola Miller,
Scott Mullin,
Charles H. Murphey,
Chris Packham,
Frank Varosi,
Claudia Vega,
Craig Warner,
A. N. Ramaprakash
, et al. (29 additional authors not shown)
Abstract:
The Canarias InfraRed Camera Experiment (CIRCE) is a near-infrared (1-2.5 micron) imager, polarimeter and low-resolution spectrograph operating as a visitor instrument for the Gran Telescopio Canarias 10.4-meter telescope. It was designed and built largely by graduate students and postdocs, with help from the UF astronomy engineering group, and is funded by the University of Florida and the U.S. N…
▽ More
The Canarias InfraRed Camera Experiment (CIRCE) is a near-infrared (1-2.5 micron) imager, polarimeter and low-resolution spectrograph operating as a visitor instrument for the Gran Telescopio Canarias 10.4-meter telescope. It was designed and built largely by graduate students and postdocs, with help from the UF astronomy engineering group, and is funded by the University of Florida and the U.S. National Science Foundation. CIRCE is intended to help fill the gap in near-infrared capabilities prior to the arrival of EMIR to the GTC, and will also provide the following scientific capabilities to compliment EMIR after its arrival: high-resolution imaging, narrowband imaging, high-time-resolution photometry, imaging polarimetry, low resolution spectroscopy. In this paper, we review the design, fabrication, integration, lab testing, and on-sky performance results for CIRCE. These include a novel approach to the opto-mechanical design, fabrication, and alignment.
△ Less
Submitted 16 September, 2017;
originally announced September 2017.
-
RoboPol: The optical polarization of gamma-ray--loud and gamma-ray--quiet blazars
Authors:
E. Angelakis,
T. Hovatta,
D. Blinov,
V. Pavlidou,
S. Kiehlmann,
I. Myserlis,
M. Boettcher,
P. Mao,
G. V. Panopoulou,
I. Liodakis,
O. G. King,
M. Balokovic,
A. Kus,
N. Kylafis,
A. Mahabal,
A. Marecki,
E. Paleologou,
I. Papadakis,
I. Papamastorakis,
E. Pazderski,
T. J. Pearson,
S. Prabhudesai,
A. N. Ramaprakash,
A. C. S. Readhead,
P. Reig
, et al. (3 additional authors not shown)
Abstract:
We present average R-band optopolarimetric data, as well as variability parameters, from the first and second RoboPol observing season. We investigate whether gamma- ray--loud and gamma-ray--quiet blazars exhibit systematic differences in their optical polarization properties. We find that gamma-ray--loud blazars have a systematically higher polarization fraction (0.092) than gamma-ray--quiet blaz…
▽ More
We present average R-band optopolarimetric data, as well as variability parameters, from the first and second RoboPol observing season. We investigate whether gamma- ray--loud and gamma-ray--quiet blazars exhibit systematic differences in their optical polarization properties. We find that gamma-ray--loud blazars have a systematically higher polarization fraction (0.092) than gamma-ray--quiet blazars (0.031), with the hypothesis of the two samples being drawn from the same distribution of polarization fractions being rejected at the 3σ level. We have not found any evidence that this discrepancy is related to differences in the redshift distribution, rest-frame R-band lu- minosity density, or the source classification. The median polarization fraction versus synchrotron-peak-frequency plot shows an envelope implying that high synchrotron- peaked sources have a smaller range of median polarization fractions concentrated around lower values. Our gamma-ray--quiet sources show similar median polarization fractions although they are all low synchrotron-peaked. We also find that the random- ness of the polarization angle depends on the synchrotron peak frequency. For high synchrotron-peaked sources it tends to concentrate around preferred directions while for low synchrotron-peaked sources it is more variable and less likely to have a pre- ferred direction. We propose a scenario which mediates efficient particle acceleration in shocks and increases the helical B-field component immediately downstream of the shock.
△ Less
Submitted 1 September, 2016;
originally announced September 2016.
-
Development of a scalable generic platform for adaptive optics real time control
Authors:
Avinash Surendran,
Mahesh P. Burse,
A. N. Ramaprakash,
Padmakar Parihar
Abstract:
The main objective of the present project is to explore the viability of an adaptive optics control system based exclusively on Field Programmable Gate Arrays (FPGAs), making strong use of their parallel processing capability. In an Adaptive Optics (AO) system, the generation of the Deformable Mirror (DM) control voltages from the Wavefront Sensor (WFS) measurements is usually through the multipli…
▽ More
The main objective of the present project is to explore the viability of an adaptive optics control system based exclusively on Field Programmable Gate Arrays (FPGAs), making strong use of their parallel processing capability. In an Adaptive Optics (AO) system, the generation of the Deformable Mirror (DM) control voltages from the Wavefront Sensor (WFS) measurements is usually through the multiplication of the wavefront slopes with a predetermined reconstructor matrix. The ability to access several hundred hard multipliers and memories concurrently in an FPGA allows performance far beyond that of a modern CPU or GPU for tasks with a well defined structure such as Adaptive Optics control. The target of the current project is to generate a signal for a real time wavefront correction, from the signals coming from a Wavefront Sensor, wherein the system would be flexible to accommodate all the current Wavefront Sensing techniques and also the different methods which are used for wavefront compensation. The system should also accommodate for different data transmission protocols (like Ethernet, USB, IEEE 1394 etc.) for transmitting data to and from the FPGA device, thus providing a more flexible platform for Adaptive Optics control. Preliminary simulation results for the formulation of the platform, and a design of a fully scalable slope computer is presented.
△ Less
Submitted 16 April, 2015;
originally announced April 2015.
-
Know The Star, Know the Planet. IV. A Stellar Companion to the Host star of the Eccentric Exoplanet HD 8673b
Authors:
Lewis C. Roberts, Jr.,
Brian D. Mason,
Christopher R. Neyman,
Yanqin Wu,
Reed L. Riddle,
J. Christopher Shelton,
John Angione,
Christoph Baranec,
Antonin Bouchez,
Khanh Bui,
Rick Burruss,
Mahesh Burse,
Pravin Chordia,
Ernest Croner,
Hillol Das,
Richard G. Dekany,
Stephen Guiwits,
David Hale,
John Henning,
Shrinivas Kulkarni Nicholas Law,
Dan McKenna,
Jennifer Milburn,
Dean Palmer,
Sujit Punnadi,
A. N. Ramaprakash
, et al. (6 additional authors not shown)
Abstract:
HD 8673 hosts a massive exoplanet in a highly eccentric orbit (e=0.723). Based on two epochs of speckle interferometry a previous publication identified a candidate stellar companion. We observed HD 8673 multiple times with the 10 m Keck II telescope, the 5 m Hale telescope, the 3.63 m AEOS telescope and the 1.5m Palomar telescope in a variety of filters with the aim of confirming and characterizi…
▽ More
HD 8673 hosts a massive exoplanet in a highly eccentric orbit (e=0.723). Based on two epochs of speckle interferometry a previous publication identified a candidate stellar companion. We observed HD 8673 multiple times with the 10 m Keck II telescope, the 5 m Hale telescope, the 3.63 m AEOS telescope and the 1.5m Palomar telescope in a variety of filters with the aim of confirming and characterizing the stellar companion. We did not detect the candidate companion, which we now conclude was a false detection, but we did detect a fainter companion. We collected astrometry and photometry of the companion on six epochs in a variety of filters. The measured differential photometry enabled us to determine that the companion is an early M dwarf with a mass estimate of 0.33-0.45 M?. The companion has a projected separation of 10 AU, which is one of the smallest projected separations of an exoplanet host binary system. Based on the limited astrometry collected, we are able to constrain the orbit of the stellar companion to a semi-major axis of 35{60 AU, an eccentricity ? 0.5 and an inclination of 75{85?. The stellar companion has likely strongly in uenced the orbit of the exoplanet and quite possibly explains its high eccentricity.
△ Less
Submitted 26 February, 2015; v1 submitted 23 February, 2015;
originally announced February 2015.
-
A survey of the high order multiplicity of nearby solar-type binary stars with Robo-AO
Authors:
Reed L. Riddle,
Andrei Tokovinin,
Brian D. Mason,
William I. Hartkopf,
Lewis C. Roberts, Jr.,
Christoph Baranec,
Nicholas M. Law,
Khanh Bui,
Mahesh P. Burse,
H. K. Das,
Richard G. Dekany,
Shrinivas Kulkarni,
Sujit Punnadi,
A. N. Ramaprakash,
Shriharsh P. Tendulkar
Abstract:
We conducted a survey of nearby binary systems composed of main sequence stars of spectral types F and G in order to improve our understanding of the hierarchical nature of multiple star systems. Using Robo-AO, the first robotic adaptive optics instrument, we collected high angular resolution images with deep and well-defined detection limits in the SDSS $i'$ band. A total of 695 components belong…
▽ More
We conducted a survey of nearby binary systems composed of main sequence stars of spectral types F and G in order to improve our understanding of the hierarchical nature of multiple star systems. Using Robo-AO, the first robotic adaptive optics instrument, we collected high angular resolution images with deep and well-defined detection limits in the SDSS $i'$ band. A total of 695 components belonging to 595 systems were observed. We prioritized observations of faint secondary components with separations over $10''$ to quantify the still poorly constrained frequency of their sub-systems. Of the 214 secondaries observed, 39 contain such subsystems; 19 of those were discovered with Robo-AO. The selection-corrected frequency of secondary sub-systems with periods from $10^{3.5}$ to $10^5$ days is 0.12$\pm$0.03, the same as the frequency of such companions to the primary. Half of the secondary pairs belong to quadruple systems where the primary is also a close pair, showing that the presence of sub-systems in both components of the outer binary is correlated. The relatively large abundance of 2+2 quadruple systems is a new finding, and will require more exploration of the formation mechanism of multiple star systems. We also targeted close binaries with periods less than 100~yr, searching for their distant tertiary components, and discovered 17 certain and 2 potential new triples. In a sub-sample of 241 close binaries, 71 have additional outer companions. The overall frequency of tertiary components is not enhanced, compared to all (non-binary) targets, but in the range of outer periods from $10^6$ to $10^{7.5}$ days (separations on the order of 500~AU), the frequency of tertiary components is 0.16$\pm$0.03, exceeding by almost a factor of two the frequency of similar systems among all targets (0.09).
△ Less
Submitted 3 November, 2014;
originally announced November 2014.
-
Early-time polarized optical light curve of GRB 131030A
Authors:
O. G. King,
D. Blinov,
D. Giannios,
I. Papadakis,
E. Angelakis,
M. Balokovic,
L. Fuhrmann,
T. Hovatta,
P. Khodade,
S. Kiehlmann,
N. Kylafis,
A. Kus,
I. Myserlis,
D. Modi,
G. Panopoulou,
I. Papamastorakis,
V. Pavlidou,
B. Pazderska,
E. Pazderski,
T. J. Pearson,
C. Rajarshi,
A. N. Ramaprakash,
A. C. S. Readhead,
P. Reig,
K. Tassis
, et al. (1 additional authors not shown)
Abstract:
We report the polarized optical light curve of a gamma-ray burst afterglow obtained using the RoboPol instrument. Observations began 655 seconds after the initial burst of gamma-rays from GRB131030A, and continued uninterrupted for 2 hours. The afterglow displayed a low, constant fractional linear polarization of $p = (2.1 \pm 1.6)\,\%$ throughout, which is similar to the interstellar polarization…
▽ More
We report the polarized optical light curve of a gamma-ray burst afterglow obtained using the RoboPol instrument. Observations began 655 seconds after the initial burst of gamma-rays from GRB131030A, and continued uninterrupted for 2 hours. The afterglow displayed a low, constant fractional linear polarization of $p = (2.1 \pm 1.6)\,\%$ throughout, which is similar to the interstellar polarization measured on nearby stars. The optical brightness decay is consistent with a forward-shock propagating in a medium of constant density, and the low polarization fraction indicates a disordered magnetic field in the shock front. This supports the idea that the magnetic field is amplified by plasma instabilities on the shock front. These plasma instabilities produce strong magnetic fields with random directions on scales much smaller than the total observable region of the shock, and the resulting randomly-oriented polarization vectors sum to produce a low net polarization over the total observable region of the shock.
△ Less
Submitted 10 September, 2014; v1 submitted 8 September, 2014;
originally announced September 2014.
-
High-efficiency Autonomous Laser Adaptive Optics
Authors:
Christoph Baranec,
Reed Riddle,
Nicholas M. Law,
A. N. Ramaprakash,
Shriharsh Tendulkar,
Kristina Hogstrom,
Khanh Bui,
Mahesh Burse,
Pravin Chordia,
Hillol Das,
Richard Dekany,
Shrinivas Kulkarni,
Sujit Punnadi
Abstract:
As new large-scale astronomical surveys greatly increase the number of objects targeted and discoveries made, the requirement for efficient follow-up observations is crucial. Adaptive optics imaging, which compensates for the image-blurring effects of Earth's turbulent atmosphere, is essential for these surveys, but the scarcity, complexity and high demand of current systems limits their availabil…
▽ More
As new large-scale astronomical surveys greatly increase the number of objects targeted and discoveries made, the requirement for efficient follow-up observations is crucial. Adaptive optics imaging, which compensates for the image-blurring effects of Earth's turbulent atmosphere, is essential for these surveys, but the scarcity, complexity and high demand of current systems limits their availability for following up large numbers of targets. To address this need, we have engineered and implemented Robo-AO, a fully autonomous laser adaptive optics and imaging system that routinely images over 200 objects per night with an acuity 10 times sharper at visible wavelengths than typically possible from the ground. By greatly improving the angular resolution, sensitivity, and efficiency of 1-3 m class telescopes, we have eliminated a major obstacle in the follow-up of the discoveries from current and future large astronomical surveys.
△ Less
Submitted 30 July, 2014;
originally announced July 2014.
-
Robotic Laser-Adaptive-Optics Imaging of 715 Kepler Exoplanet Candidates using Robo-AO
Authors:
Nicholas M. Law,
Tim Morton,
Christoph Baranec,
Reed Riddle,
Ganesh Ravichandran,
Carl Ziegler,
John Asher Johnson,
Shriharsh P. Tendulkar,
Khanh Bui,
Mahesh P. Burse,
H. K. Das,
Richard G. Dekany,
Shrinivas Kulkarni,
Sujit Punnadi,
A. N. Ramaprakash
Abstract:
The Robo-AO Kepler Planetary Candidate Survey is designed to observe every Kepler planet candidate host star with laser adaptive optics imaging to search for blended nearby stars, which may be physically associated companions and/or responsible for transit false positives. In this paper we present the results from the 2012 observing season, searching for stars close to 715 representative Kepler pl…
▽ More
The Robo-AO Kepler Planetary Candidate Survey is designed to observe every Kepler planet candidate host star with laser adaptive optics imaging to search for blended nearby stars, which may be physically associated companions and/or responsible for transit false positives. In this paper we present the results from the 2012 observing season, searching for stars close to 715 representative Kepler planet candidate hosts. We find 53 companions, 44 of which are new discoveries. We detail the Robo-AO survey data reduction methods including a method of using the large ensemble of target observations as mutual point-spread-function references, along with a new automated companion-detection algorithm designed for large adaptive optics surveys. Our survey is sensitive to objects from 0.15" to 2.5" separation, with contrast ratios up to delta-m~6. We measure an overall nearby-star-probability for Kepler planet candidates of 7.4% +/- 1.0%, and calculate the effects of each detected nearby star on the Kepler-measured planetary radius. We discuss several KOIs of particular interest, including KOI-191 and KOI-1151, which are both multi-planet systems with detected stellar companions whose unusual planetary system architecture might be best explained if they are "coincident multiple" systems, with several transiting planets shared between the two stars. Finally, we detect 2.6-sigma evidence for <15d-period giant planets being 2-3 times more likely be found in wide stellar binaries than smaller close-in planets and all sizes of further-out planets.
△ Less
Submitted 3 June, 2014; v1 submitted 17 December, 2013;
originally announced December 2013.
-
The RoboPol Pipeline and Control System
Authors:
O. G. King,
D. Blinov,
A. N. Ramaprakash,
I. Myserlis,
E. Angelakis,
M. Baloković,
R. Feiler,
L. Fuhrmann,
T. Hovatta,
P. Khodade,
A. Kougentakis,
N. Kylafis,
A. Kus,
E. Paleologou,
G. Panopoulou,
I. Papadakis,
I. Papamastorakis,
G. Paterakis,
V. Pavlidou,
B. Pazderska,
E. Pazderski,
T. J. Pearson,
C. Rajarshi,
A. C. S. Readhead,
P. Reig
, et al. (4 additional authors not shown)
Abstract:
We describe the data reduction pipeline and control system for the RoboPol project. The RoboPol project is monitoring the optical $R$-band magnitude and linear polarization of a large sample of active galactic nuclei that is dominated by blazars. The pipeline calibrates and reduces each exposure frame, producing a measurement of the magnitude and linear polarization of every source in the…
▽ More
We describe the data reduction pipeline and control system for the RoboPol project. The RoboPol project is monitoring the optical $R$-band magnitude and linear polarization of a large sample of active galactic nuclei that is dominated by blazars. The pipeline calibrates and reduces each exposure frame, producing a measurement of the magnitude and linear polarization of every source in the $13'\times 13'$ field of view. The control system combines a dynamic scheduler, real-time data reduction, and telescope automation to allow high-efficiency unassisted observations.
△ Less
Submitted 7 March, 2014; v1 submitted 28 October, 2013;
originally announced October 2013.
-
Laser Tomography Adaptive Optics (LTAO): A performance study
Authors:
E. Tatulli,
A. N. Ramaprakash
Abstract:
We present an analytical derivation of the on-axis performance of Adaptive Optics systems using a given number of guide stars of arbitrary altitude, distributed at arbitrary angular positions in the sky. The expressions of the residual error are given for cases of both continuous and discrete turbulent atmospheric profiles. Assuming Shack-Hartmann wavefront sensing with circular apertures, we demo…
▽ More
We present an analytical derivation of the on-axis performance of Adaptive Optics systems using a given number of guide stars of arbitrary altitude, distributed at arbitrary angular positions in the sky. The expressions of the residual error are given for cases of both continuous and discrete turbulent atmospheric profiles. Assuming Shack-Hartmann wavefront sensing with circular apertures, we demonstrate that the error is formally described by integrals of products of three Bessel functions. We compare the performance of Adaptive Optics correction when using natural, Sodium or Rayleigh laser guide stars. For small diameter class telescopes (~5m), we show that a few number of Rayleigh beacons can provide similar performance to that of a single Sodium laser, for a lower overall cost of the instrument. For bigger apertures, using Rayleigh stars may not be such a suitable alternative because of the too severe cone effect that drastically degrades the quality of the correction.
△ Less
Submitted 28 October, 2013;
originally announced October 2013.
-
Rise of the machines: first year operations of the Robo-AO visible-light laser-adaptive optics instrument
Authors:
Christoph Baranec,
Reed Riddle,
Nicholas M. Law,
A. N. Ramaprakash,
Shriharsh Tendulkar,
Kristina Hogstrom,
Khanh Bui,
Mahesh Burse,
Pravin Chordia,
Hillol Das,
Richard Dekany,
Shrinivas Kulkarni,
Sujit Punnadi,
Roger Smith
Abstract:
Robo-AO is the first autonomous laser adaptive optics system and science instrument operating on sky. With minimal human oversight, the system robotically executes large scale surveys, monitors long-term astrophysical dynamics and characterizes newly discovered transients, all at the visible diffraction limit. The average target-to target operational overhead, including slew time, is a mere 86 s,…
▽ More
Robo-AO is the first autonomous laser adaptive optics system and science instrument operating on sky. With minimal human oversight, the system robotically executes large scale surveys, monitors long-term astrophysical dynamics and characterizes newly discovered transients, all at the visible diffraction limit. The average target-to target operational overhead, including slew time, is a mere 86 s, enabling up to ~20 observations per hour. The first of many envisioned systems went live in June 2012, and has since finished 78 nights of science observing at the Palomar Observatory 60-inch (1.5 m) telescope, with over 9,000 robotic observations executed as of August 2013. The system will be augmented in 2014 with a low-noise wide field infrared camera, which will double as a tip-tilt sensor, to widen the spectral bandwidth of observations, increase available sky coverage as well as enable deeper visible imaging using adaptive-optics sharpened infrared tip-tilt guide sources.
△ Less
Submitted 17 September, 2013;
originally announced September 2013.
-
A Study of starless dark cloud LDN 1570: Distance, Dust properties and Magnetic field geometry
Authors:
C. Eswaraiah,
G. Maheswar,
A. K. Pandey,
J. Jose,
A. N. Ramaprakash,
H. C. Bhatt
Abstract:
We wish to map the magnetic field geometry and to study the dust properties of the starless cloud, L1570, using multi-wavelength optical polarimetry and photometry of the stars projected on the cloud. We made R-band imaging polarimetry of the stars projected on a cloud, L1570, to trace the magnetic field orientation. We also made multi-wavelength polarimetric and photometric observations to constr…
▽ More
We wish to map the magnetic field geometry and to study the dust properties of the starless cloud, L1570, using multi-wavelength optical polarimetry and photometry of the stars projected on the cloud. We made R-band imaging polarimetry of the stars projected on a cloud, L1570, to trace the magnetic field orientation. We also made multi-wavelength polarimetric and photometric observations to constrain the properties of dust in L1570. We estimated a distance of 394 +/- 70 pc to the cloud using 2MASS JHKs colours. Using the values of the Serkowski parameters namely $σ_{1}$, $\bar ε$, λmax and the position of the stars on near infrared color-color diagram, we identified 13 stars that could possibly have intrinsic polarization and/or rotation in their polarization angles. One star, 2MASS J06075075+1934177, which is a B4Ve spectral type, show the presence of diffuse interstellar bands in the spectrum apart from showing Hα line in emission. There is an indication for the presence of slightly bigger dust grains towards L1570 on the basis of the dust grain size-indicators such as λmax and Rv values. The magnetic field lines are found to be parallel to the cloud structures seen in the 250μm images (also in 8μm and 12μm shadow images) of L1570. Based on the magnetic field geometry, the cloud structure and the complex velocity structure, we believe that L1570 is in the process of formation due to the converging flow material mediated by the magnetic field lines. Structure function analysis showed that in the L1570 cloud region the large scale magnetic fields are stronger when compared with the turbulent component of magnetic fields. The estimated magnetic field strengths suggest that the L1570 cloud region is sub-critical and hence could be strongly supported by the magnetic field lines.
△ Less
Submitted 22 May, 2013;
originally announced May 2013.
-
Magnetic fields in cometary globules - IV. LBN 437
Authors:
Archana Soam,
G. Maheswar,
H. C. Bhatt,
Chang Won Lee,
A. N. Ramaprakash
Abstract:
We present results of our $R-$band polarimetry of a cometary globule, LBN 437 (Gal96-15, $\ell$ $=$ 96$\degree$, \textit{b} $=-15\degree$), to study magnetic field geometry of the cloud. We estimated a distance of $360\pm65$ pc to LBN 437 (also one additional cloud, CB 238) using near-IR photometric method. Foreground contribution to the observed polarisation values was subtracted by making polari…
▽ More
We present results of our $R-$band polarimetry of a cometary globule, LBN 437 (Gal96-15, $\ell$ $=$ 96$\degree$, \textit{b} $=-15\degree$), to study magnetic field geometry of the cloud. We estimated a distance of $360\pm65$ pc to LBN 437 (also one additional cloud, CB 238) using near-IR photometric method. Foreground contribution to the observed polarisation values was subtracted by making polarimetric observations of stars that are located in the direction of the cloud and with known distances from the Hipparcos parallax measurements. The magnetic field geometry of LBN 437 is found to follow the curved shape of the globule head. This could be due to the drag that the magnetic field lines could have experienced because of the ionisation radiation from the same exciting source that caused the cometary shape of the cloud. The orientation of the outflow from the Herbig A4e star, LkH$α$ 233 (or V375 Lac), located at the head of LBN 437, is found to be parallel to both the initial (prior to the ionising source was turned on) ambient magnetic field (inferred from a star HD 214243 located just in front of the cloud) and the Galactic plane.
△ Less
Submitted 5 April, 2013;
originally announced April 2013.
-
Characterizing the Cool KOIs. V. KOI-256: A Mutually Eclipsing Post-Common Envelope Binary
Authors:
Philip S. Muirhead,
Andrew Vanderburg,
Avi Shporer,
Juliette Becker,
Jonathan J. Swift,
James P. Lloyd,
Jim Fuller,
Ming Zhao,
Sasha Hinkley,
J. Sebastian Pineda,
Michael Bottom,
Andrew W. Howard,
Kaspar von Braun,
Tabetha S. Boyajian,
Nicholas Law,
Christoph Baranec,
Reed Riddle,
A. N. Ramaprakash,
Shriharsh P. Tendulkar,
Khanh Bui,
Mahesh Burse,
Pravin Chordia,
Hillol Das,
Richard Dekany,
Sujit Punnadi
, et al. (1 additional authors not shown)
Abstract:
We report that Kepler Object of Interest 256 (KOI-256) is a mutually eclipsing post-common envelope binary (ePCEB), consisting of a cool white dwarf (M = 0.592 +/- 0.089 MSun, R = 0.01345 +/- 0.00091 RSun, Teff = 7100 +/- 700 K) and an active M3 dwarf (M = 0.51 +/- 0.16 MSun, R = 0.540 +/- 0.014 RSun, Teff = 3450 +/- 50 K) with an orbital period of 1.37865 +/- 0.00001 days. KOI-256 is listed as ho…
▽ More
We report that Kepler Object of Interest 256 (KOI-256) is a mutually eclipsing post-common envelope binary (ePCEB), consisting of a cool white dwarf (M = 0.592 +/- 0.089 MSun, R = 0.01345 +/- 0.00091 RSun, Teff = 7100 +/- 700 K) and an active M3 dwarf (M = 0.51 +/- 0.16 MSun, R = 0.540 +/- 0.014 RSun, Teff = 3450 +/- 50 K) with an orbital period of 1.37865 +/- 0.00001 days. KOI-256 is listed as hosting a transiting planet-candidate by Borucki et al. and Batalha et al.; here we report that the planet-candidate transit signal is in fact the occultation of a white dwarf as it passes behind the M dwarf. We combine publicly-available long- and short-cadence Kepler light curves with ground-based measurements to robustly determine the system parameters. The occultation events are readily apparent in the Kepler light curve, as is spin-orbit synchronization of the M dwarf, and we detect the transit of the white dwarf in front of the M dwarf halfway between the occultation events. The size of the white dwarf with respect to the Einstein ring during transit (REin = 0.00473 +/- 0.00055 RSun) causes the transit depth to be shallower than expected from pure geometry due to gravitational lensing. KOI-256 is an old, long-period ePCEB and serves as a benchmark object for studying the evolution of binary star systems as well as white dwarfs themselves, thanks largely to the availability of near-continuous, ultra-precise Kepler photometry.
△ Less
Submitted 3 April, 2013;
originally announced April 2013.
-
Bringing the Visible Universe into Focus with Robo-AO
Authors:
Christoph Baranec,
Reed Riddle,
Nicholas M. Law,
A. N. Ramaprakash,
Shriharsh P. Tendulkar,
Khanh Bui,
Mahesh P. Burse,
Pravin Chordia,
Hillol K. Das,
Jack T. C. Davis,
Richard G. Dekany,
Mansi M. Kasliwal,
Shrinivas R. Kulkarni,
Timothy D. Morton,
Eran O. Ofek,
Sujit Punnadi
Abstract:
Light from astronomical objects must travel through the earth's turbulent atmosphere before it can be imaged by ground-based telescopes. To enable direct imaging at maximum theoretical angular resolution, advanced techniques such as those employed by the Robo-AO adaptive-optics system must be used.
Light from astronomical objects must travel through the earth's turbulent atmosphere before it can be imaged by ground-based telescopes. To enable direct imaging at maximum theoretical angular resolution, advanced techniques such as those employed by the Robo-AO adaptive-optics system must be used.
△ Less
Submitted 13 February, 2013;
originally announced February 2013.
-
The Robo-AO software: Fully autonomous operation of a laser guide star adaptive optics and science system
Authors:
Reed L. Riddle,
Mahesh P. Burse,
Nicholas M. Law,
Shriharsh P. Tendulkar,
Christoph Baranec,
Alexander R. Rudy,
Marland Sitt,
Ankit Arya,
Athanasios Papadopoulos,
A. N. Ramaprakash,
Richard G. Dekany
Abstract:
Robo-AO is the first astronomical laser guide star adaptive optics (AO) system designed to operate completely independent of human supervision. A single computer commands the AO system, the laser guide star, visible and near-infrared science cameras (which double as tip-tip sensors), the telescope, and other instrument functions. Autonomous startup and shutdown sequences as well as concatenated vi…
▽ More
Robo-AO is the first astronomical laser guide star adaptive optics (AO) system designed to operate completely independent of human supervision. A single computer commands the AO system, the laser guide star, visible and near-infrared science cameras (which double as tip-tip sensors), the telescope, and other instrument functions. Autonomous startup and shutdown sequences as well as concatenated visible observations were demonstrated in late 2011. The fully robotic software is currently operating during a month long demonstration of Robo-AO at the Palomar Observatory 60-inch telescope.
△ Less
Submitted 28 January, 2013;
originally announced January 2013.
-
Robo-AO: An Autonomous Laser Adaptive Optics and Science System
Authors:
Christoph Baranec,
Reed Riddle,
A. N. Ramaprakash,
Nicholas Law,
Shriharsh Tendulkar,
Shrinivas Kulkarni,
Richard Dekany,
Khanh Bui,
Jack Davis,
Jeff Zolkower,
Jason Fucik,
Mahesh Burse,
Hillol Das,
Pravin Chordia,
Mansi Kasliwal,
Eran Ofek,
Timothy Morton,
John Johnson
Abstract:
Robo-AO, a fully autonomous, laser guide star adaptive optics and science system, is being commissioned at Palomar Observatory's 60-inch telescope. Here we discuss the instrument, scientific goals and results of initial on-sky operation.
Robo-AO, a fully autonomous, laser guide star adaptive optics and science system, is being commissioned at Palomar Observatory's 60-inch telescope. Here we discuss the instrument, scientific goals and results of initial on-sky operation.
△ Less
Submitted 4 December, 2012;
originally announced December 2012.
-
Millions of Multiples: Detecting and Characterizing Close-Separation Binary Systems in Synoptic Sky Surveys
Authors:
Emil Terziev,
Nicholas M. Law,
Iair Arcavi,
Christoph Baranec,
Joshua S. Bloom,
Khanh Bui,
Mahesh P. Burse,
Pravin Chorida,
H. K. Das,
Richard G. Dekany,
Adam L. Kraus,
S. R. Kulkarni,
Peter Nugent,
Eran O. Ofek,
Sujit Punnadi,
A. N. Ramaprakash,
Reed Riddle,
Shriharsh P. Tendulkar
Abstract:
The direct detection of binary systems in wide-field surveys is limited by the size of the stars' point-spread-functions (PSFs). A search for elongated objects can find closer companions, but is limited by the precision to which the PSF shape can be calibrated for individual stars. We have developed the BinaryFinder algorithm to search for close binaries by using precision measurements of PSF elli…
▽ More
The direct detection of binary systems in wide-field surveys is limited by the size of the stars' point-spread-functions (PSFs). A search for elongated objects can find closer companions, but is limited by the precision to which the PSF shape can be calibrated for individual stars. We have developed the BinaryFinder algorithm to search for close binaries by using precision measurements of PSF ellipticity across wide-field survey images. We show that the algorithm is capable of reliably detecting binary systems down to approximately 1/5 of the seeing limit, and can directly measure the systems' position angles, separations and contrast ratios. To verify the algorithm's performance we evaluated 100,000 objects in Palomar Transient Factory (PTF) wide-field-survey data for signs of binarity, and then used the Robo-AO robotic laser adaptive optics system to verify the parameters of 44 high-confidence targets. We show that BinaryFinder correctly predicts the presence of close companions with a <5% false-positive rate, measures the detected binaries' position angles within 2 degrees and separations within 25%, and weakly constrains their contrast ratios. When applied to the full PTF dataset, we estimate that BinaryFinder will discover and characterize ~450,000 physically-associated binary systems with separations <2 arcseconds and magnitudes brighter than R=18. New wide-field synoptic surveys with high sensitivity and sub-arcsecond angular resolution, such as LSST, will allow BinaryFinder to reliably detect millions of very faint binary systems with separations as small as 0.1 arcseconds.
△ Less
Submitted 16 October, 2012;
originally announced October 2012.
-
Robo-AO: autonomous and replicable laser-adaptive-optics and science system
Authors:
C. Baranec,
R. Riddle,
A. N. Ramaprakash,
N. Law,
S. Tendulkar,
S. Kulkarni,
R. Dekany,
K. Bui,
J. Davis,
M. Burse,
H. Das,
S. Hildebrandt,
S. Punnadi,
R. Smith
Abstract:
We have created a new autonomous laser-guide-star adaptive-optics (AO) instrument on the 60-inch (1.5-m) telescope at Palomar Observatory called Robo-AO. The instrument enables diffraction-limited resolution observing in the visible and near-infrared with the ability to observe well over one-hundred targets per night due to its fully robotic operation. Robo- AO is being used for AO surveys of targ…
▽ More
We have created a new autonomous laser-guide-star adaptive-optics (AO) instrument on the 60-inch (1.5-m) telescope at Palomar Observatory called Robo-AO. The instrument enables diffraction-limited resolution observing in the visible and near-infrared with the ability to observe well over one-hundred targets per night due to its fully robotic operation. Robo- AO is being used for AO surveys of targets numbering in the thousands, rapid AO imaging of transient events and longterm AO monitoring not feasible on large diameter telescope systems. We have taken advantage of cost-effective advances in deformable mirror and laser technology while engineering Robo-AO with the intention of cloning the system for other few-meter class telescopes around the world.
△ Less
Submitted 1 October, 2012;
originally announced October 2012.
-
Three New Eclipsing White-dwarf - M-dwarf Binaries Discovered in a Search for Transiting Planets Around M-dwarfs
Authors:
Nicholas M. Law,
Adam L. Kraus,
Rachel Street,
Benjamin J. Fulton,
Lynne A. Hillenbrand,
Avi Shporer,
Tim Lister,
Christoph Baranec,
Joshua S. Bloom,
Khanh Bui,
Mahesh P. Burse,
S. Bradley Cenko,
H. K. Das,
Jack. T. C. Davis,
Richard G. Dekany,
Alexei V. Filippenko,
Mansi M. Kasliwal,
S. R. Kulkarni,
Peter Nugent,
Eran O. Ofek,
Dovi Poznanski,
Robert M. Quimby,
A. N. Ramaprakash,
Reed Riddle,
Jeffrey M. Silverman
, et al. (2 additional authors not shown)
Abstract:
We present three new eclipsing white-dwarf / M-dwarf binary systems discovered during a search for transiting planets around M-dwarfs. Unlike most known eclipsing systems of this type, the optical and infrared emission is dominated by the M-dwarf components, and the systems have optical colors and discovery light curves consistent with being Jupiter-radius transiting planets around early M-dwarfs.…
▽ More
We present three new eclipsing white-dwarf / M-dwarf binary systems discovered during a search for transiting planets around M-dwarfs. Unlike most known eclipsing systems of this type, the optical and infrared emission is dominated by the M-dwarf components, and the systems have optical colors and discovery light curves consistent with being Jupiter-radius transiting planets around early M-dwarfs. We detail the PTF/M-dwarf transiting planet survey, part of the Palomar Transient Factory (PTF). We present a Graphics Processing Unit (GPU)-based box-least-squares search for transits that runs approximately 8X faster than similar algorithms implemented on general purpose systems. For the discovered systems, we decompose low-resolution spectra of the systems into white-dwarf and M-dwarf components, and use radial velocity measurements and cooling models to estimate masses and radii for the white dwarfs. The systems are compact, with periods between 0.35 and 0.45 days and semimajor axes of approximately 2 solar radii (0.01 AU). We use the Robo-AO laser guide star adaptive optics system to tentatively identify one of the objects as a triple system. We also use high-cadence photometry to put an upper limit on the white dwarf radius of 0.025 solar radii (95% confidence) in one of the systems. We estimate that 0.08% (90% confidence) of M-dwarfs are in these short-period, post-common-envelope white-dwarf / M-dwarf binaries where the optical light is dominated by the M-dwarf. Similar eclipsing binary systems can have arbitrarily small eclipse depths in red bands and generate plausible small-planet-transit light curves. As such, these systems are a source of false positives for M-dwarf transiting planet searches. We present several ways to rapidly distinguish these binaries from transiting planet systems.
△ Less
Submitted 7 December, 2011;
originally announced December 2011.