-
Shack-Hartmann wavefront sensing: A new approach to time-resolved measurement of stress intensity during dynamic fracture of small brittle specimens
Authors:
Liuchi Li,
Velat Kilic,
Milad Alemohammad,
K. T. Ramesh,
Mark A. Foster,
Todd C. Hufnagel
Abstract:
The stress intensity factor is important for understanding crack initiation and propagation. Because it cannot be measured directly, the characterization of the stress intensity factor relies on the measurement of deformation around a crack tip. Such measurements are challenging for dynamic fracture of brittle materials where the deformation is small and the crack tip velocity can be high (>1 km/s…
▽ More
The stress intensity factor is important for understanding crack initiation and propagation. Because it cannot be measured directly, the characterization of the stress intensity factor relies on the measurement of deformation around a crack tip. Such measurements are challenging for dynamic fracture of brittle materials where the deformation is small and the crack tip velocity can be high (>1 km/s). Digital gradient sensing (DGS) is capable of full-field measurement of surface deformation with sub-microsecond temporal resolution, but it is limited to centimeter-scale specimens and has a spatial resolution of only $\sim 1$mm. This limits its ability to measure deformations close to the crack tip. Here, we demonstrate the potential of Shack-Hartmann wavefront sensing (SHWFS), as an alternative to DGS, for measuring surface deformation during dynamic brittle fracture of millimeter-scale specimens. Using an commercial glass ceramic as an example material, we demonstrate the capability of SHWFS to measure the surface slope evolution induced by a propagating crack on millimeter-scale specimens with a micrometer-scale spatial resolution and a sub-microsecond temporal resolution. The SHWFS apparatus has the additional advantage of being physically more compact than a typical DGS apparatus. We verify our SHWFS measurements by comparing them with analytical predictions and phase-field simulations of the surface slope around a crack tip. Then, fitting the surface slope measurements to the asymptotic crack-tip field solution, we extract the evolution of the apparent stress intensity factor associated with the propagating crack tip. We conclude by discussing potential future enhancements of this technique and how its compactness could enable the integration with other characterization techniques including x-ray phase-contrast imaging (XPCI) toward a multi-modal characterization.
△ Less
Submitted 1 October, 2023;
originally announced October 2023.
-
Rapid Quantification of Dynamic and Spall Strength of Metals Across Strain Rates
Authors:
Suhas Eswarappa Prameela,
Christopher C. Walker,
Christopher S. DiMarco,
Debjoy D. Mallick,
Xingsheng Sun,
Stephanie Hernandez,
Taisuke Sasaki,
Justin W. Wilkerson,
K. T. Ramesh,
George M. Pharr,
Timothy P. Weihs
Abstract:
The response of metals and their microstructures under extreme dynamic conditions can be markedly different from that under quasistatic conditions. Traditionally, high strain rates and shock stresses are measured using cumbersome and expensive methods such as the Kolsky bar or large spall experiments. These methods are low throughput and do not facilitate high-fidelity microstructure-property link…
▽ More
The response of metals and their microstructures under extreme dynamic conditions can be markedly different from that under quasistatic conditions. Traditionally, high strain rates and shock stresses are measured using cumbersome and expensive methods such as the Kolsky bar or large spall experiments. These methods are low throughput and do not facilitate high-fidelity microstructure-property linkages. In this work, we combine two powerful small-scale testing methods, custom nanoindentation, and laser-driven micro-flyer shock, to measure the dynamic and spall strength of metals. The nanoindentation system is configured to test samples from quasistatic to dynamic strain rate regimes (10$^{-3}$ s$^{-1}$ to 10$^{+4}$ s$^{-1}$). The laser-driven micro-flyer shock system can test samples through impact loading between 10$^{+5}$ s$^{-1}$ to 10$^{+7}$ s$^{-1}$ strain rates, triggering spall failure. The model material used for testing is Magnesium alloys, which are lightweight, possess high-specific strengths and have historically been challenging to design and strengthen due to their mechanical anisotropy. Here, we modulate their microstructure by adding or removing precipitates to demonstrate interesting upticks in strain rate sensitivity and evolution of dynamic strength. At high shock loading rates, we unravel an interesting paradigm where the spall strength of these materials converges, but the failure mechanisms are markedly different. Peak aging, considered to be a standard method to strengthen metallic alloys, causes catastrophic failure, faring much worse than solutionized alloys. Our high throughput testing framework not only quantifies strength but also teases out unexplored failure mechanisms at extreme strain rates, providing valuable insights for the rapid design and improvement of metals for extreme environments.
△ Less
Submitted 25 September, 2023;
originally announced September 2023.
-
A predictive model for fluid-saturated, brittle granular materials during high-velocity impact events
Authors:
Aaron S. Baumgarten,
Justin Moreno,
Brett Kuwik,
Sohanjit Ghosh,
Ryan Hurley,
K. T. Ramesh
Abstract:
Granular materials -- aggregates of many discrete, disconnected solid particles -- are ubiquitous in natural and industrial settings. Predictive models for their behavior have wide ranging applications, e.g. in defense, mining, construction, pharmaceuticals, and the exploration of planetary surfaces. In many of these applications, granular materials mix and interact with liquids and gases, changin…
▽ More
Granular materials -- aggregates of many discrete, disconnected solid particles -- are ubiquitous in natural and industrial settings. Predictive models for their behavior have wide ranging applications, e.g. in defense, mining, construction, pharmaceuticals, and the exploration of planetary surfaces. In many of these applications, granular materials mix and interact with liquids and gases, changing their effective behavior in non-intuitive ways. Although such materials have been studied for more than a century, a unified description of their behaviors remains elusive.
In this work, we develop a model for granular materials and mixtures that is usable under particularly challenging conditions: high-velocity impact events. This model combines descriptions for the many deformation mechanisms that are activated during impact -- particle fracture and breakage; pore collapse and dilation; shock loading; and pore fluid coupling -- within a thermo-mechanical framework based on poromechanics and mixture theory. This approach allows for simultaneous modeling of the granular material and the pore fluid, and includes both their independent motions and their complex interactions. A general form of the model is presented alongside its specific application to two types of sands that have been studied in the literature. The model predictions are shown to closely match experimental observation of these materials through several GPa stresses, and simulations are shown to capture the different dynamic responses of dry and fully-saturated sand to projectile impacts at 1.3 km/s.
△ Less
Submitted 31 August, 2023;
originally announced August 2023.
-
Physics-informed Data-driven Discovery of Constitutive Models with Application to Strain-Rate-sensitive Soft Materials
Authors:
Kshitiz Upadhyay,
Jan N. Fuhg,
Nikolaos Bouklas,
K. T. Ramesh
Abstract:
A novel data-driven constitutive modeling approach is proposed, which combines the physics-informed nature of modeling based on continuum thermodynamics with the benefits of machine learning. This approach is demonstrated on strain-rate-sensitive soft materials. This model is based on the viscous dissipation-based visco-hyperelasticity framework where the total stress is decomposed into volumetric…
▽ More
A novel data-driven constitutive modeling approach is proposed, which combines the physics-informed nature of modeling based on continuum thermodynamics with the benefits of machine learning. This approach is demonstrated on strain-rate-sensitive soft materials. This model is based on the viscous dissipation-based visco-hyperelasticity framework where the total stress is decomposed into volumetric, isochoric hyperelastic, and isochoric viscous overstress contributions. It is shown that each of these stress components can be written as linear combinations of the components of an irreducible integrity basis. Three Gaussian process regression-based surrogate models are trained (one per stress component) between principal invariants of strain and strain rate tensors and the corresponding coefficients of the integrity basis components. It is demonstrated that this type of model construction enforces key physics-based constraints on the predicted responses: the second law of thermodynamics, the principles of local action and determinism, objectivity, the balance of angular momentum, an assumed reference state, isotropy, and limited memory. The three surrogate models that constitute our constitutive model are evaluated by training them on small-size numerically generated data sets corresponding to a single deformation mode and then analyzing their predictions over a much wider testing regime comprising multiple deformation modes. Our physics-informed data-driven constitutive model predictions are compared with the corresponding predictions of classical continuum thermodynamics-based and purely data-driven models. It is shown that our surrogate models can reasonably capture the stress-strain-strain rate responses in both training and testing regimes, and provide improvements in terms of prediction accuracy, generalizability to multiple deformation modes, and compatibility with limited data.
△ Less
Submitted 26 April, 2023;
originally announced April 2023.
-
Successful Kinetic Impact into an Asteroid for Planetary Defense
Authors:
R. Terik Daly,
Carolyn M. Ernst,
Olivier S. Barnouin,
Nancy L. Chabot,
Andrew S. Rivkin,
Andrew F. Cheng,
Elena Y. Adams,
Harrison F. Agrusa,
Elisabeth D. Abel,
Amy L. Alford,
Erik I. Asphaug,
Justin A. Atchison,
Andrew R. Badger,
Paul Baki,
Ronald-L. Ballouz,
Dmitriy L. Bekker,
Julie Bellerose,
Shyam Bhaskaran,
Bonnie J. Buratti,
Saverio Cambioni,
Michelle H. Chen,
Steven R. Chesley,
George Chiu,
Gareth S. Collins,
Matthew W. Cox
, et al. (76 additional authors not shown)
Abstract:
While no known asteroid poses a threat to Earth for at least the next century, the catalog of near-Earth asteroids is incomplete for objects whose impacts would produce regional devastation. Several approaches have been proposed to potentially prevent an asteroid impact with Earth by deflecting or disrupting an asteroid. A test of kinetic impact technology was identified as the highest priority sp…
▽ More
While no known asteroid poses a threat to Earth for at least the next century, the catalog of near-Earth asteroids is incomplete for objects whose impacts would produce regional devastation. Several approaches have been proposed to potentially prevent an asteroid impact with Earth by deflecting or disrupting an asteroid. A test of kinetic impact technology was identified as the highest priority space mission related to asteroid mitigation. NASA's Double Asteroid Redirection Test (DART) mission is the first full-scale test of kinetic impact technology. The mission's target asteroid was Dimorphos, the secondary member of the S-type binary near-Earth asteroid (65803) Didymos. This binary asteroid system was chosen to enable ground-based telescopes to quantify the asteroid deflection caused by DART's impact. While past missions have utilized impactors to investigate the properties of small bodies those earlier missions were not intended to deflect their targets and did not achieve measurable deflections. Here we report the DART spacecraft's autonomous kinetic impact into Dimorphos and reconstruct the impact event, including the timeline leading to impact, the location and nature of the DART impact site, and the size and shape of Dimorphos. The successful impact of the DART spacecraft with Dimorphos and the resulting change in Dimorphos's orbit demonstrates that kinetic impactor technology is a viable technique to potentially defend Earth if necessary.
△ Less
Submitted 3 March, 2023;
originally announced March 2023.
-
Data-driven Uncertainty Quantification in Computational Human Head Models
Authors:
Kshitiz Upadhyay,
Dimitris G. Giovanis,
Ahmed Alshareef,
Andrew K. Knutsen,
Curtis L. Johnson,
Aaron Carass,
Philip V. Bayly,
Michael D. Shields,
K. T. Ramesh
Abstract:
Computational models of the human head are promising tools for estimating the impact-induced response of brain, and thus play an important role in the prediction of traumatic brain injury. Modern biofidelic head model simulations are associated with very high computational cost, and high-dimensional inputs and outputs, which limits the applicability of traditional uncertainty quantification (UQ) m…
▽ More
Computational models of the human head are promising tools for estimating the impact-induced response of brain, and thus play an important role in the prediction of traumatic brain injury. Modern biofidelic head model simulations are associated with very high computational cost, and high-dimensional inputs and outputs, which limits the applicability of traditional uncertainty quantification (UQ) methods on these systems. In this study, a two-stage, data-driven manifold learning-based framework is proposed for UQ of computational head models. This framework is demonstrated on a 2D subject-specific head model, where the goal is to quantify uncertainty in the simulated strain fields (i.e., output), given variability in the material properties of different brain substructures (i.e., input). In the first stage, a data-driven method based on multi-dimensional Gaussian kernel-density estimation and diffusion maps is used to generate realizations of the input random vector directly from the available data. Computational simulations of a small number of realizations provide input-output pairs for training data-driven surrogate models in the second stage. The surrogate models employ nonlinear dimensionality reduction using Grassmannian diffusion maps, Gaussian process regression to create a low-cost mapping between the input random vector and the reduced solution space, and geometric harmonics models for mapping between the reduced space and the Grassmann manifold. It is demonstrated that the surrogate models provide highly accurate approximations of the computational model while significantly reducing the computational cost. Monte Carlo simulations of the surrogate models are used for uncertainty propagation. UQ of strain fields highlight significant spatial variation in model uncertainty, and reveal key differences in uncertainty among commonly used strain-based brain injury predictor variables.
△ Less
Submitted 2 February, 2022; v1 submitted 29 October, 2021;
originally announced October 2021.