Influence of microstructure and atomic-scale chemistry on iron ore reduction with hydrogen at 700°C
Authors:
Se-Ho Kim,
Xue Zhang,
Kevin Schweinar,
Isnaldi R. Souza Filho,
Katja Angerendt,
Yan Ma,
Dirk Vogel,
Leigh T. Stephenson,
Ayman A. El-Zoka,
Jaber Rezaei Mianroodi,
Michael Rohwerder,
Baptiste Gault,
Dierk Raabe
Abstract:
With 1.85 billion tons produced per year, steel is the most important material class in terms of volume and environmental impact. While steel is a sustainability enabler, for instance through lightweight design, magnetic devices, and efficient turbines, its primary production is not. For 3000 years, iron has been reduced from ores using carbon. Today 2.1 tons CO2 are produced per ton of steel, cau…
▽ More
With 1.85 billion tons produced per year, steel is the most important material class in terms of volume and environmental impact. While steel is a sustainability enabler, for instance through lightweight design, magnetic devices, and efficient turbines, its primary production is not. For 3000 years, iron has been reduced from ores using carbon. Today 2.1 tons CO2 are produced per ton of steel, causing 30% of the global CO2 emissions in the manufacturing sector, which translates to 6.5% of the global CO2 emissions. These numbers qualify iron- and steel-making as the largest single industrial greenhouse gas emission source. The envisaged future industrial route to mitigate these CO2 emissions targets green hydrogen as a reductant. Although this reaction has been studied for decades, its kinetics is not well understood, particularly during the wustite reduction step which is dramatically slower than the hematite reduction. Many rate-limiting factors of this reaction are set by the micro- and nanostructure as well as the local chemistry of the ores. Their quantification allows knowledge-driven ore preparation and process optimization to make the hydrogen-based reduction of iron ores commercially viable, enabling the required massive CO2 mitigation to ease global warming. Here, we report on a multi-scale structure and composition analysis of iron reduced from hematite with pure H2, reaching down to near-atomic scale.
△ Less
Submitted 10 February, 2021;
originally announced February 2021.
PtIr protective coating system for precision glass molding tools: design, evaluation and mechanism of degradation
Authors:
Marcel Friedrichs,
Zirong Peng,
Tim Grunwald,
Michael Rohwerder,
Baptiste Gault,
Thomas Bergs
Abstract:
During Precision Glass Molding (PGM), the molding tools have to withstand severe thermo-chemical and thermo-mechanical loads cyclically. To protect their high-quality optical surface against degradation and increase their service lifetime, protective coatings are applied on the molding tools. In this work, we designed four different PtIr protective coating systems, where the thickness of the PtIr…
▽ More
During Precision Glass Molding (PGM), the molding tools have to withstand severe thermo-chemical and thermo-mechanical loads cyclically. To protect their high-quality optical surface against degradation and increase their service lifetime, protective coatings are applied on the molding tools. In this work, we designed four different PtIr protective coating systems, where the thickness of the PtIr layer and the adhesion layer were varied. Their lifetimes were evaluated and compared using an in-house built testing bench. Among all the studied coating systems, the protective coating, which consists of a 600nm thick PtIr layer and a 20nm thick Cr adhesion layer, showed the best durability with the longest lifetime. To understand the degradation mechanism of the coating during actual engineering production, an industrial PGM machine was used and emulation PGM tests were conducted. Detailed sample characterization was performed using an array of complementary techniques including white light interferometry (WLI), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), scanning transmission electron microscopy (STEM) and atom probe tomography (APT). Phenomena such as interdiffusion, oxidation, coating spallation and glass sticking on the coating were observed and are discussed in the context of optimization of the coating's performance and durability.
△ Less
Submitted 23 October, 2019; v1 submitted 10 October, 2019;
originally announced October 2019.
